summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/clk.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos4415-clock.txt38
-rw-r--r--Documentation/devicetree/bindings/clock/exynos7-clock.txt93
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,mmp2.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,pxa168.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,pxa910.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt18
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt8
-rw-r--r--Documentation/devicetree/bindings/clock/sunxi.txt31
9 files changed, 238 insertions, 15 deletions
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 1fee72f4d331..4ff84623d5e1 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -74,7 +74,7 @@ the operations defined in clk.h:
long (*determine_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long *best_parent_rate,
- struct clk **best_parent_clk);
+ struct clk_hw **best_parent_clk);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw,
diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt
new file mode 100644
index 000000000000..847d98bae8cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt
@@ -0,0 +1,38 @@
+* Samsung Exynos4415 Clock Controller
+
+The Exynos4415 clock controller generates and supplies clock to various
+consumer devices within the Exynos4415 SoC.
+
+Required properties:
+
+- compatible: should be one of the following:
+ - "samsung,exynos4415-cmu" - for the main system clocks controller
+ (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains).
+ - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory
+ Controller (DMC) domain clock controller.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4415.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ cmu: clock-controller@10030000 {
+ compatible = "samsung,exynos4415-cmu";
+ reg = <0x10030000 0x18000>;
+ #clock-cells = <1>;
+ };
+
+ cmu-dmc: clock-controller@105C0000 {
+ compatible = "samsung,exynos4415-cmu-dmc";
+ reg = <0x105C0000 0x3000>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
new file mode 100644
index 000000000000..6d3d5f80c1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -0,0 +1,93 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+ compatible strings to indicate the clock controller
+ functionality.
+
+ - "samsung,exynos7-clock-topc"
+ - "samsung,exynos7-clock-top0"
+ - "samsung,exynos7-clock-top1"
+ - "samsung,exynos7-clock-ccore"
+ - "samsung,exynos7-clock-peric0"
+ - "samsung,exynos7-clock-peric1"
+ - "samsung,exynos7-clock-peris"
+ - "samsung,exynos7-clock-fsys0"
+ - "samsung,exynos7-clock-fsys1"
+
+ - reg: physical base address of the controller and the length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+ the given clock controller. Please refer the next section to
+ find the input clocks for a given controller.
+
+- clock-names: list of names of clocks which are fed as the input
+ to the given clock controller.
+
+Input clocks for top0 clock controller:
+ - fin_pll
+ - dout_sclk_bus0_pll
+ - dout_sclk_bus1_pll
+ - dout_sclk_cc_pll
+ - dout_sclk_mfc_pll
+
+Input clocks for top1 clock controller:
+ - fin_pll
+ - dout_sclk_bus0_pll
+ - dout_sclk_bus1_pll
+ - dout_sclk_cc_pll
+ - dout_sclk_mfc_pll
+
+Input clocks for ccore clock controller:
+ - fin_pll
+ - dout_aclk_ccore_133
+
+Input clocks for peric0 clock controller:
+ - fin_pll
+ - dout_aclk_peric0_66
+ - sclk_uart0
+
+Input clocks for peric1 clock controller:
+ - fin_pll
+ - dout_aclk_peric1_66
+ - sclk_uart1
+ - sclk_uart2
+ - sclk_uart3
+
+Input clocks for peris clock controller:
+ - fin_pll
+ - dout_aclk_peris_66
+
+Input clocks for fsys0 clock controller:
+ - fin_pll
+ - dout_aclk_fsys0_200
+ - dout_sclk_mmc2
+
+Input clocks for fsys1 clock controller:
+ - fin_pll
+ - dout_aclk_fsys1_200
+ - dout_sclk_mmc0
+ - dout_sclk_mmc1
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
new file mode 100644
index 000000000000..af376a01f2b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
@@ -0,0 +1,21 @@
+* Marvell MMP2 Clock Controller
+
+The MMP2 clock subsystem generates and supplies clock to various
+controllers within the MMP2 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa168.txt b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
new file mode 100644
index 000000000000..c62eb1d173a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
@@ -0,0 +1,21 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
new file mode 100644
index 000000000000..d9f41f3c03a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
@@ -0,0 +1,21 @@
+* Marvell PXA910 Clock Controller
+
+The PXA910 clock subsystem generates and supplies clock to various
+controllers within the PXA910 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 4 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
index 952e373178d2..054f65f9319c 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -7,11 +7,16 @@ to 64.
Required Properties:
- compatible: Must be one of the following
+ - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks
+ - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks
- "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
- "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks
+ - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks
- "renesas,cpg-div6-clock" for generic DIV6 clocks
- reg: Base address and length of the memory resource used by the DIV6 clock
- - clocks: Reference to the parent clock
+ - clocks: Reference to the parent clock(s); either one, four, or eight
+ clocks must be specified. For clocks with multiple parents, invalid
+ settings must be specified as "<0>".
- #clock-cells: Must be 0
- clock-output-names: The name of the clock as a free-form string
@@ -19,10 +24,11 @@ Required Properties:
Example
-------
- sd2_clk: sd2_clk@e6150078 {
- compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe6150078 0 4>;
- clocks = <&pll1_div2_clk>;
+ sdhi2_clk: sdhi2_clk@e615007c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615007c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
#clock-cells = <0>;
- clock-output-names = "sd2";
+ clock-output-names = "sdhi2ck";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index a5f52238c80d..2e18676bd4b5 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -26,11 +26,11 @@ Required Properties:
must appear in the same order as the output clocks.
- #clock-cells: Must be 1
- clock-output-names: The name of the clocks as free-form strings
- - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
+ - clock-indices: Indices of the gate clocks into the group (0 to 31)
-The clocks, clock-output-names and renesas,clock-indices properties contain one
-entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
-gate clocks must not be declared.
+The clocks, clock-output-names and clock-indices properties contain one entry
+per gate clock. The MSTP groups are sparsely populated. Unimplemented gate
+clocks must not be declared.
Example
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index ed116df9c3e7..67b2b99f2b33 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -10,14 +10,17 @@ Required properties:
"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
+ "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80
"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
+ "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80
"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-a10-axi-clk" - for the AXI clock
"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
+ "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80
"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
@@ -26,24 +29,29 @@ Required properties:
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
+ "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
+ "allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80
+ "allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80
"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
+ "allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
+ "allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80
"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
- "allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
+ "allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
- "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
+ "allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
@@ -63,8 +71,9 @@ Required properties for all clocks:
multiplexed clocks, the list order must match the hardware
programming order.
- #clock-cells : from common clock binding; shall be set to 0 except for
- "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk" and
- "allwinner,sun4i-pll6-clk" where it shall be set to 1
+ the following compatibles where it shall be set to 1:
+ "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
+ "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk"
- clock-output-names : shall be the corresponding names of the outputs.
If the clock module only has one output, the name shall be the
module name.
@@ -79,6 +88,12 @@ Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. This ID is the
offset of the bit controlling this particular gate in the register.
+For the other clocks with "#clock-cells" = 1, the additional ID shall
+refer to the index of the output.
+
+For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
+is the normal PLL6 output, or "pll6". The second output is rate doubled
+PLL6, or "pll6x2".
For example:
@@ -106,6 +121,14 @@ pll5: clk@01c20020 {
clock-output-names = "pll5_ddr", "pll5_other";
};
+pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6", "pll6x2";
+};
+
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";