diff options
Diffstat (limited to 'Documentation')
8 files changed, 146 insertions, 4 deletions
diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt index df8d4fb85939..ed494ac0beb2 100644 --- a/Documentation/arm/Samsung/Bootloader-interface.txt +++ b/Documentation/arm/Samsung/Bootloader-interface.txt @@ -19,7 +19,7 @@ executing kernel. Address: sysram_ns_base_addr Offset Value Purpose ============================================================================= -0x08 exynos_cpu_resume_ns System suspend +0x08 exynos_cpu_resume_ns, mcpm_entry_point System suspend 0x0c 0x00000bad (Magic cookie) System suspend 0x1c exynos4_secondary_startup Secondary CPU boot 0x1c + 4*cpu exynos4_secondary_startup (Exynos4412) Secondary CPU boot @@ -56,7 +56,8 @@ Offset Value Purpose Address: pmu_base_addr Offset Value Purpose ============================================================================= -0x0908 Non-zero (only Exynos3250) Secondary CPU boot up indicator +0x0908 Non-zero Secondary CPU boot up indicator + on Exynos3250 and Exynos542x 4. Glossary diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.txt new file mode 100644 index 000000000000..fcdb9fd5f53a --- /dev/null +++ b/Documentation/arm/keystone/knav-qmss.txt @@ -0,0 +1,56 @@ +* Texas Instruments Keystone Navigator Queue Management SubSystem driver + +Driver source code path + drivers/soc/ti/knav_qmss.c + drivers/soc/ti/knav_qmss_acc.c + +The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of +the main hardware sub system which forms the backbone of the Keystone +multi-core Navigator. QMSS consist of queue managers, packed-data structure +processors(PDSP), linking RAM, descriptor pools and infrastructure +Packet DMA. +The Queue Manager is a hardware module that is responsible for accelerating +management of the packet queues. Packets are queued/de-queued by writing or +reading descriptor address to a particular memory mapped location. The PDSPs +perform QMSS related functions like accumulation, QoS, or event management. +Linking RAM registers are used to link the descriptors which are stored in +descriptor RAM. Descriptor RAM is configurable as internal or external memory. +The QMSS driver manages the PDSP setups, linking RAM regions, +queue pool management (allocation, push, pop and notify) and descriptor +pool management. + +knav qmss driver provides a set of APIs to drivers to open/close qmss queues, +allocate descriptor pools, map the descriptors, push/pop to queues etc. For +details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h + +DT documentation is available at +Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt + +Accumulator QMSS queues using PDSP firmware +============================================ +The QMSS PDSP firmware support accumulator channel that can monitor a single +queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the +driver that interface with the accumulator PDSP. This configures +accumulator channels defined in DTS (example in DT documentation) to monitor +1 or 32 queues per channel. More description on the firmware is available in +CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at + git://git.ti.com/keystone-rtos/qmss-lld.git + +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator +channels. This firmware is available under ti-keystone folder of +firmware.git at + git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git + +To use copy the firmware image to lib/firmware folder of the initramfs or +ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin +in the file system and boot up the kernel. User would see + + "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP" + +in the boot up log if loading of firmware to PDSP is successful. + +Use of accumulated queues requires the firmware image to be present in the +file system. The driver doesn't acc queues to the supported queue range if +PDSP is not running in the SoC. The API call fails if there is a queue open +request to an acc queue and PDSP is not running. So make sure to copy firmware +to file system before using these queue types. diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index 5e38e1582f95..430d279a8df3 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -25,7 +25,7 @@ SunXi family + Datasheet http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf - - Allwinner A13 (sun5i) + - Allwinner A13 / R8 (sun5i) + Datasheet http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf + User Manual diff --git a/Documentation/devicetree/bindings/arm/coherency-fabric.txt b/Documentation/devicetree/bindings/arm/coherency-fabric.txt index 8dd46617c889..9b5c3f620e65 100644 --- a/Documentation/devicetree/bindings/arm/coherency-fabric.txt +++ b/Documentation/devicetree/bindings/arm/coherency-fabric.txt @@ -27,6 +27,11 @@ Required properties: * For "marvell,armada-380-coherency-fabric", only one pair is needed for the per-CPU fabric registers. +Optional properties: + +- broken-idle: boolean to set when the Idle mode is not supported by the + hardware. + Examples: coherency-fabric@d0020200 { diff --git a/Documentation/devicetree/bindings/arm/mvebu-cpu-config.txt b/Documentation/devicetree/bindings/arm/mvebu-cpu-config.txt new file mode 100644 index 000000000000..2cdcd716da40 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mvebu-cpu-config.txt @@ -0,0 +1,20 @@ +MVEBU CPU Config registers +-------------------------- + +MVEBU (Marvell SOCs: Armada 370/XP) + +Required properties: + +- compatible: one of: + - "marvell,armada-370-cpu-config" + - "marvell,armada-xp-cpu-config" + +- reg: Should contain CPU config registers location and length, in + their per-CPU variant + +Example: + + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; + }; diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 67da20539540..bb9b0faa919d 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -6,6 +6,7 @@ using one of the following compatible strings: allwinner,sun4i-a10 allwinner,sun5i-a10s allwinner,sun5i-a13 + allwinner,sun5i-r8 allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 diff --git a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt new file mode 100644 index 000000000000..d27a646f48a9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt @@ -0,0 +1,60 @@ +UniPhier outer cache controller + +UniPhier SoCs are integrated with a full-custom outer cache controller system. +All of them have a level 2 cache controller, and some have a level 3 cache +controller as well. + +Required properties: +- compatible: should be "socionext,uniphier-system-cache" +- reg: offsets and lengths of the register sets for the device. It should + contain 3 regions: control register, revision register, operation register, + in this order. +- cache-unified: specifies the cache is a unified cache. +- cache-size: specifies the size in bytes of the cache +- cache-sets: specifies the number of associativity sets of the cache +- cache-line-size: specifies the line size in bytes +- cache-level: specifies the level in the cache hierarchy. The value should + be 2 for L2 cache, 3 for L3 cache, etc. + +Optional properties: +- next-level-cache: phandle to the next level cache if present. The next level + cache should be also compatible with "socionext,uniphier-system-cache". + +The L2 cache must exist to use the L3 cache; the cache hierarchy must be +indicated correctly with "next-level-cache" properties. + +Example 1 (system with L2): + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + cache-unified; + cache-size = <0x80000>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + +Example 2 (system with L2 and L3): + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + cache-unified; + cache-size = <0x200000>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + cache-unified; + cache-size = <0x400000>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index d8e8cdb733f9..d1ce21a4904d 100644 --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -221,7 +221,6 @@ qmss: qmss@2a40000 { #size-cells = <1>; ranges; pdsp0@0x2a10000 { - firmware = "keystone/qmss_pdsp_acc48_k2_le_1_0_0_8.fw"; reg = <0x2a10000 0x1000>, <0x2a0f000 0x100>, <0x2a0c000 0x3c8>, |