diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/PCI/pci.txt | 8 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/pci/designware-pcie.txt | 7 |
2 files changed, 11 insertions, 4 deletions
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index bccf602a87f5..6f458564d625 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -525,8 +525,9 @@ corresponding register block for you. 6. Other interesting functions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -pci_find_slot() Find pci_dev corresponding to given bus and - slot numbers. +pci_get_domain_bus_and_slot() Find pci_dev corresponding to given domain, + bus and slot and number. If the device is + found, its reference count is increased. pci_set_power_state() Set PCI Power Management state (0=D0 ... 3=D3) pci_find_capability() Find specified capability in device's capability list. @@ -582,7 +583,8 @@ having sane locking. pci_find_device() Superseded by pci_get_device() pci_find_subsys() Superseded by pci_get_subsys() -pci_find_slot() Superseded by pci_get_slot() +pci_find_slot() Superseded by pci_get_domain_bus_and_slot() +pci_get_slot() Superseded by pci_get_domain_bus_and_slot() The alternative is the traditional PCI device driver that walks PCI diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index e216af356847..d5d26d443693 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -3,7 +3,7 @@ Required properties: - compatible: should contain "snps,dw-pcie" to identify the core, plus an identifier for the specific instance, such - as "samsung,exynos5440-pcie". + as "samsung,exynos5440-pcie" or "fsl,imx6q-pcie". - reg: base addresses and lengths of the pcie controller, the phy controller, additional register for the phy controller. - interrupts: interrupt values for level interrupt, @@ -21,6 +21,11 @@ Required properties: - num-lanes: number of lanes to use - reset-gpio: gpio pin number of power good signal +Optional properties for fsl,imx6q-pcie +- power-on-gpio: gpio pin number of power-enable signal +- wake-up-gpio: gpio pin number of incoming wakeup signal +- disable-gpio: gpio pin number of outgoing rfkill/endpoint disable signal + Example: SoC specific DT Entry: |