diff options
Diffstat (limited to 'Documentation')
30 files changed, 1530 insertions, 308 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml new file mode 100644 index 000000000000..5fec063d9a13 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4908 device tree bindings + +description: + Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM4906 based boards + items: + - const: brcm,bcm4906 + - const: brcm,bcm4908 + + - description: BCM4908 based boards + items: + - enum: + - asus,gt-ac5300 + - const: brcm,bcm4908 + + - description: BCM49408 based boards + items: + - const: brcm,bcm49408 + - const: brcm,bcm4908 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 6064d98b1031..395359dc94fd 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -89,7 +89,10 @@ Required properties: "fsl,imx8qm-clock" "fsl,imx8qxp-clock" followed by "fsl,scu-clk" -- #clock-cells: Should be 1. Contains the Clock ID value. +- #clock-cells: Should be either + 2: Contains the Resource and Clock ID value. + or + 1: Contains the Clock ID value. (DEPRECATED) - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names - clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" @@ -208,7 +211,7 @@ firmware { clk: clk { compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; - #clock-cells = <1>; + #clock-cells = <2>; }; iomuxc { @@ -263,8 +266,7 @@ serial@5a060000 { ... pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; - clocks = <&clk IMX8QXP_UART0_CLK>, - <&clk IMX8QXP_UART0_IPG_CLK>; - clock-names = "per", "ipg"; + clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; + clock-names = "ipg"; power-domains = <&pd IMX_SC_R_UART_0>; }; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 934289446abb..34000f7fbe02 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -33,16 +33,57 @@ properties: items: - enum: - fsl,imx25-pdk + - karo,imx25-tx25 - const: fsl,imx25 - - description: i.MX27 Product Development Kit + - description: i.MX25 Eukrea CPUIMX25 Boards + items: + - enum: + - eukrea,mbimxsd25-baseboard # Eukrea MBIMXSD25 + - const: eukrea,cpuimx25 + - const: fsl,imx25 + + - description: i.MX25 Eukrea MBIMXSD25 Boards + items: + - enum: + - eukrea,mbimxsd25-baseboard-cmo-qvga + - eukrea,mbimxsd25-baseboard-dvi-svga + - eukrea,mbimxsd25-baseboard-dvi-vga + - const: eukrea,mbimxsd25-baseboard + - const: eukrea,cpuimx25 + - const: fsl,imx25 + + - description: i.MX27 based Boards items: - enum: - armadeus,imx27-apf27 # APF27 SoM - - armadeus,imx27-apf27dev # APF27 SoM on APF27Dev board - fsl,imx27-pdk - const: fsl,imx27 + - description: i.MX27 APF27 SoM Board + items: + - const: armadeus,imx27-apf27dev + - const: armadeus,imx27-apf27 + - const: fsl,imx27 + + - description: i.MX27 Eukrea CPUIMX27 SoM Board + items: + - const: eukrea,mbimxsd27-baseboard + - const: eukrea,cpuimx27 + - const: fsl,imx27 + + - description: i.MX27 Phytec pca100 Board + items: + - const: phytec,imx27-pca100-rdk + - const: phytec,imx27-pca100 + - const: fsl,imx27 + + - description: i.MX27 Phytec pcm970 Board + items: + - const: phytec,imx27-pcm970 + - const: phytec,imx27-pcm038 + - const: fsl,imx27 + - description: i.MX28 based Boards items: - enum: @@ -88,13 +129,33 @@ properties: - kobo,aura - const: fsl,imx50 - - description: i.MX51 Babbage Board + - description: i.MX51 based Boards items: - enum: - - armadeus,imx51-apf51 # APF51 SoM - - armadeus,imx51-apf51dev # APF51 SoM on APF51Dev board + - armadeus,imx51-apf51 # Armadeus Systems APF51 module - fsl,imx51-babbage - technologic,imx51-ts4800 + - zii,imx51-scu3-esb + - zii,imx51-scu2-mezz + - zii,imx51-rdu1 + - const: fsl,imx51 + + - description: i.MX51 based Armadeus Systems APF51Dev Board + items: + - const: armadeus,imx51-apf51dev + - const: armadeus,imx51-apf51 + - const: fsl,imx51 + + - description: i.MX51 based Digi ConnectCore CC(W)-MX51 JSK Board + items: + - const: digi,connectcore-ccxmx51-jsk + - const: digi,connectcore-ccxmx51-som + - const: fsl,imx51 + + - description: i.MX51 based Eukrea CPUIMX51 Board + items: + - const: eukrea,mbimxsd51 + - const: eukrea,cpuimx51 - const: fsl,imx51 - description: i.MX53 based Boards @@ -104,36 +165,111 @@ properties: - fsl,imx53-ard - fsl,imx53-evk - fsl,imx53-qsb + - fsl,imx53-qsrb # Freescale i.MX53 Quick Start-R Board - fsl,imx53-smd + - ge,imx53-cpuvo # General Electric CS ONE + - inversepath,imx53-usbarmory # Inverse Path USB armory + - karo,tx53 # Ka-Ro electronics TX53 module + - kiebackpeter,imx53-ddc # K+P imx53 DDC + - kiebackpeter,imx53-hsc # K+P imx53 HSC - menlo,m53menlo + - voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668 + - const: fsl,imx53 + + - description: i.MX53 based Aries/DENX M53EVK Board + items: + - const: aries,imx53-m53evk + - const: denx,imx53-m53evk + - const: fsl,imx53 + + - description: i.MX53 based TQ MBa53 Board + items: + - const: tq,mba53 + - const: tq,tqma53 - const: fsl,imx53 - description: i.MX6Q based Boards items: - enum: - - armadeus,imx6q-apf6 # APF6 (Quad/Dual) SoM - - armadeus,imx6q-apf6dev # APF6 (Quad/Dual) SoM on APF6Dev board + - auvidea,h100 # Auvidea H100 + - boundary,imx6q-nitrogen6_max + - boundary,imx6q-nitrogen6_som2 + - boundary,imx6q-nitrogen6x + - compulab,cm-fx6 # CompuLab CM-FX6 + - dmo,imx6q-edmqmx6 # Data Modul eDM-QMX6 Board + - embest,imx6q-marsboard # Embest MarS Board i.MX6Dual - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base + - engicam,imx6-icore # Engicam i.CoreM6 Starter Kit + - engicam,imx6-icore-rqs # Engicam i.CoreM6 RQS Starter Kit - fsl,imx6q-arm2 - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite - fsl,imx6q-sabresd + - karo,imx6q-tx6q # Ka-Ro electronics TX6Q Modules + - kiebackpeter,imx6q-tpc # K+P i.MX6 Quad TPC Board - kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module + - kosagi,imx6q-novena # Kosagi Novena Dual/Quad - logicpd,imx6q-logicpd + - lwn,display5 # Liebherr Display5 i.MX6 Quad Board + - lwn,mccmon6 # Liebherr Monitor6 i.MX6 Quad Board + - nutsboard,imx6q-pistachio # NutsBoard i.MX6 Quad Pistachio + - microsys,sbc6x # MicroSys sbc6x board + - poslab,imx6q-savageboard # Poslab SavageBoard Quad - prt,prti6q # Protonic PRTI6Q board - prt,prtwd2 # Protonic WD2 board + - rex,imx6q-rex-pro # Rex Pro i.MX6 Quad Board + - solidrun,cubox-i/q # SolidRun Cubox-i Dual/Quad + - solidrun,hummingboard/q + - solidrun,hummingboard2/q + - tbs,imx6q-tbs2910 # TBS2910 Matrix ARM mini PC - technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf - technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit - technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - - toradex,apalis_imx6q # Apalis iMX6 Module - - toradex,apalis_imx6q-eval # Apalis iMX6 Module on Apalis Evaluation Board - - toradex,apalis_imx6q-ixora # Apalis iMX6 Module on Ixora - - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6 Module on Ixora V1.1 + - toradex,apalis_imx6q # Apalis iMX6 Module + - udoo,imx6q-udoo # Udoo i.MX6 Quad Board + - uniwest,imx6q-evi # Uniwest Evi - variscite,dt6customboard + - wand,imx6q-wandboard # Wandboard i.MX6 Quad Board + - zealz,imx6q-gk802 # Zealz GK802 + - zii,imx6q-zii-rdu2 # ZII RDU2 Board + - const: fsl,imx6q + + - description: i.MX6Q Advantech DMS-BA16 Boards + items: + - enum: + - advantech,imx6q-dms-ba16 # Advantech DMS-BA16 + - ge,imx6q-b450v3 # General Electric B450v3 + - ge,imx6q-b650v3 # General Electric B650v3 + - ge,imx6q-b850v3 # General Electric B850v3 + - const: advantech,imx6q-ba16 + - const: fsl,imx6q + + - description: i.MX6Q Armadeus APF6 Boards + items: + - const: armadeus,imx6q-apf6dev + - const: armadeus,imx6q-apf6 + - const: fsl,imx6q + + - description: i.MX6Q CompuLab Utilite Pro Board + items: + - const: compulab,utilite-pro + - const: compulab,cm-fx6 + - const: fsl,imx6q + + - description: i.MX6Q DFI FS700-M60-6QD Board + items: + - const: dfi,fs700-m60-6qd + - const: dfi,fs700e-m60 + - const: fsl,imx6q + + - description: i.MX6Q DHCOM Premium Developer Kit Board + items: + - const: dh,imx6q-dhcom-pdk2 + - const: dh,imx6q-dhcom-som - const: fsl,imx6q - description: i.MX6Q Gateworks Ventana Boards @@ -172,11 +308,32 @@ properties: - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6q + - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module + items: + - enum: + - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board + - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board + - const: toradex,apalis_imx6q + - const: fsl,imx6q + + - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1 + items: + - const: toradex,apalis_imx6q-ixora-v1.1 + - const: toradex,apalis_imx6q-ixora + - const: toradex,apalis_imx6q + - const: fsl,imx6q + - description: i.MX6QP based Boards items: - enum: + - boundary,imx6qp-nitrogen6_max + - boundary,imx6qp-nitrogen6_som2 - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board + - karo,imx6qp-tx6qp # Ka-Ro electronics TX6QP-8037 Module + - prt,prtwd3 # Protonic WD3 board + - wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board + - zii,imx6qp-zii-rdu2 # ZII RDU2+ Board - const: fsl,imx6qp - description: i.MX6QP PHYTEC phyBOARD-Mira @@ -189,32 +346,59 @@ properties: - description: i.MX6DL based Boards items: - enum: - - armadeus,imx6dl-apf6 # APF6 (Solo) SoM - - armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board + - abb,aristainetos-imx6dl-4 # aristainetos i.MX6 Dual Lite Board 4 + - abb,aristainetos-imx6dl-7 # aristainetos i.MX6 Dual Lite Board 7 + - abb,aristainetos2-imx6dl-4 # aristainetos2 i.MX6 Dual Lite Board 4 + - abb,aristainetos2-imx6dl-7 # aristainetos2 i.MX6 Dual Lite Board 7 + - alt,alti6p # Altesco I6P Board + - boundary,imx6dl-nit6xlite # Boundary Devices Nitrogen6 Lite + - boundary,imx6dl-nitrogen6x # Boundary Devices Nitrogen6x + - bticino,imx6dl-mamoj # BTicino i.MX6DL Mamoj - eckelmann,imx6dl-ci4x10 - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base + - engicam,imx6-icore # Engicam i.CoreM6 Starter Kit + - engicam,imx6-icore-rqs # Engicam i.CoreM6 RQS Starter Kit - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board + - fsl,imx6dl-sabrelite # i.MX6 DualLite SABRE Lite Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - karo,imx6dl-tx6dl # Ka-Ro electronics TX6U Modules - kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module + - poslab,imx6dl-savageboard # Poslab SavageBoard Dual - prt,prtrvt # Protonic RVT board - prt,prtvt7 # Protonic VT7 board + - rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board + - riot,imx6s-riotboard # RIoTboard i.MX6S + - solidrun,cubox-i/dl # SolidRun Cubox-i Solo/DualLite + - solidrun,hummingboard/dl + - solidrun,hummingboard2/dl # SolidRun HummingBoard2 Solo/DualLite - technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf - technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit - technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - - toradex,colibri_imx6dl # Colibri iMX6 Module - - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 - - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6 Module on Colibri Evaluation Board V3 - - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3 + - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board + - vdl,lanmcu # Van der Laan LANMCU board + - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board - ysoft,imx6dl-yapp4-orion # i.MX6 DualLite Y Soft IOTA Orion board - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board - const: fsl,imx6dl + - description: i.MX6DL based Armadeus AFP6 Board + items: + - const: armadeus,imx6dl-apf6dev + - const: armadeus,imx6dl-apf6 # APF6 (Solo) SoM + - const: fsl,imx6dl + + - description: i.MX6DL based DFI FS700-M60-6DL Board + items: + - const: dfi,fs700-m60-6dl + - const: dfi,fs700e-m60 + - const: fsl,imx6dl + - description: i.MX6DL Gateworks Ventana Boards items: - enum: @@ -250,12 +434,29 @@ properties: - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6dl + - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri + Evaluation Board V3 + items: + - const: toradex,colibri_imx6dl-eval-v3 + - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - const: fsl,imx6dl + + - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri + Evaluation Board V3 + items: + - const: toradex,colibri_imx6dl-v1_1-eval-v3 + - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 + - const: toradex,colibri_imx6dl-eval-v3 + - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - const: fsl,imx6dl + - description: i.MX6SL based Boards items: - enum: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board - kobo,tolino-shine2hd - kobo,tolino-shine3 + - revotics,imx6sl-warp # Revotics WaRP Board - const: fsl,imx6sl - description: i.MX6SLL based Boards @@ -268,17 +469,23 @@ properties: - description: i.MX6SX based Boards items: - enum: + - boundary,imx6sx-nitrogen6sx - fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board - fsl,imx6sx-sdb # i.MX6 SoloX SDB Board - fsl,imx6sx-sdb-reva # i.MX6 SoloX SDB Rev-A Board + - samtec,imx6sx-vining-2000 # Softing VIN|ING 2000 Board + - udoo,neobasic # UDOO Neo Basic Board + - udoo,neoextended # UDOO Neo Extended + - udoo,neofull # UDOO Neo Full - const: fsl,imx6sx - description: i.MX6UL based Boards items: - enum: - - armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM - - armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board + - engicam,imx6ul-geam # Engicam GEAM6UL Starter Kit + - engicam,imx6ul-isiot # Engicam Is.IoT MX6UL eMMC/NAND Starter kit - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - karo,imx6ul-tx6ul # Ka-Ro electronics TXUL-0010 Module - kontron,imx6ul-n6310-som # Kontron N6310 SOM - kontron,imx6ul-n6311-som # Kontron N6311 SOM - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf @@ -286,6 +493,26 @@ properties: - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi - const: fsl,imx6ul + - description: i.MX6UL Armadeus Systems OPOS6UL SoM Board + items: + - const: armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board + - const: armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM + - const: fsl,imx6ul + + - description: i.MX6UL Digi International ConnectCore 6UL Boards + items: + - enum: + - digi,ccimx6ulsbcexpress # Digi International ConnectCore 6UL SBC Express + - digi,ccimx6ulsbcpro # Digi International ConnectCore 6UL SBC Pro + - const: digi,ccimx6ulsom + - const: fsl,imx6ul + + - description: i.MX6UL Grinn liteBoard + items: + - const: grinn,imx6ul-liteboard + - const: grinn,imx6ul-litesom + - const: fsl,imx6ul + - description: i.MX6UL PHYTEC phyBOARD-Segin items: - enum: @@ -317,8 +544,6 @@ properties: - description: i.MX6ULL based Boards items: - enum: - - armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM - - armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board @@ -326,6 +551,12 @@ properties: - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board - const: fsl,imx6ull + - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board + items: + - const: armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board + - const: armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: @@ -351,17 +582,32 @@ properties: - description: i.MX7S based Boards items: - enum: - - toradex,colibri-imx7s # Colibri iMX7 Solo Module - - toradex,colibri-imx7s-aster # Colibri iMX7 Solo Module on Aster Carrier Board - - toradex,colibri-imx7s-eval-v3 # Colibri iMX7 Solo Module on Colibri Evaluation Board V3 - - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM + - element14,imx7s-warp # Element14 Warp i.MX7 Board + - const: fsl,imx7s + + - description: i.MX7S Boards with Toradex Colibri iMX7S Module + items: + - enum: + - toradex,colibri-imx7s-aster # Module on Aster Carrier Board + - toradex,colibri-imx7s-eval-v3 # Module on Colibri Evaluation Board V3 + - const: toradex,colibri-imx7s + - const: fsl,imx7s + + - description: TQ-Systems TQMa7S SoM on MBa7x board + items: + - const: tq,imx7s-mba7 + - const: tq,imx7s-tqma7 - const: fsl,imx7s - description: i.MX7D based Boards items: - enum: + - boundary,imx7d-nitrogen7 + - compulab,cl-som-imx7 # CompuLab CL-SOM-iMX7 - fsl,imx7d-sdb # i.MX7 SabreSD Board - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board + - kam,imx7d-flex-concentrator # Kamstrup OMNIA Flex Concentrator + - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit @@ -376,11 +622,16 @@ properties: # Colibri Evaluation Board V3 - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on # Colibri Evaluation Board V3 - - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d + - description: TQ-Systems TQMa7D SoM on MBa7x board + items: + - const: tq,imx7d-mba7 + - const: tq,imx7d-tqma7 + - const: fsl,imx7d + - description: Compulab SBC-iMX7 is a single board computer based on the Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with @@ -392,6 +643,22 @@ properties: - const: compulab,cl-som-imx7 - const: fsl,imx7d + - description: i.MX7D Boards with Toradex Colibri i.MX7D Module + items: + - enum: + - toradex,colibri-imx7d-aster # Module on Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3 + - const: toradex,colibri-imx7d + - const: fsl,imx7d + + - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module + items: + - enum: + - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board + - toradex,colibri-imx7d-emmc-eval-v3 # Module on Colibri Evaluation Board V3 + - const: toradex,colibri-imx7d-emmc + - const: fsl,imx7d + - description: i.MX7ULP based Boards items: - enum: @@ -405,9 +672,16 @@ properties: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm + - description: Kontron BL i.MX8MM (N801X S) Board + items: + - const: kontron,imx8mm-n801x-s + - const: kontron,imx8mm-n801x-som + - const: fsl,imx8mm + - description: Variscite VAR-SOM-MX8MM based boards items: - const: variscite,var-som-mx8mm-symphony @@ -491,10 +765,26 @@ properties: - fsl,vf600 - fsl,vf610 - fsl,vf610m4 - - toradex,vf500-colibri_vf50 # Colibri VF50 Module - - toradex,vf500-colibri_vf50-on-eval # Colibri VF50 Module on Colibri Evaluation Board - - toradex,vf610-colibri_vf61 # Colibri VF61 Module - - toradex,vf610-colibri_vf61-on-eval # Colibri VF61 Module on Colibri Evaluation Board + + - description: Toradex Colibri VF50 Module on Colibri Evaluation Board + items: + - const: toradex,vf500-colibri_vf50-on-eval + - const: toradex,vf500-colibri_vf50 + - const: fsl,vf500 + + - description: VF610 based Boards + items: + - enum: + - lwn,bk4 # Liebherr BK4 controller + - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board + - fsl,vf610-twr # VF610 Tower Board + - const: fsl,vf610 + + - description: Toradex Colibri VF61 Module on Colibri Evaluation Board + items: + - const: toradex,vf610-colibri_vf61-on-eval + - const: toradex,vf610-colibri_vf61 + - const: fsl,vf610 - description: ZII's VF610 based Boards items: @@ -515,6 +805,7 @@ properties: - ebs-systart,oxalis - fsl,ls1012a-rdb - fsl,ls1012a-frdm + - fsl,ls1012a-frwy - fsl,ls1012a-qds - const: fsl,ls1012a @@ -613,6 +904,15 @@ properties: - enum: - fsl,lx2160a-qds - fsl,lx2160a-rdb + - fsl,lx2162a-qds + - const: fsl,lx2160a + + - description: SolidRun LX2160A based Boards + items: + - enum: + - solidrun,clearfog-cx + - solidrun,honeycomb + - const: solidrun,lx2160a-cex7 - const: fsl,lx2160a - description: S32V234 based Boards diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index f736e8c859fa..53f0d4e3ea98 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -84,6 +84,10 @@ properties: - enum: - mediatek,mt8135-evbp1 - const: mediatek,mt8135 + - items: + - enum: + - mediatek,mt8167-pumpkin + - const: mediatek,mt8167 - description: Google Elm (Acer Chromebook R13) items: - const: google,elm-rev8 diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml new file mode 100644 index 000000000000..599c65980f5d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 thingy.jp. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MStar/SigmaStar Armv7 SoC SMP control registers + +maintainers: + - Daniel Palmer <daniel@thingy.jp> + +description: | + MStar/SigmaStar's Armv7 SoCs that have more than one processor + have a region of registers that allow setting the boot address + and a magic number that allows secondary processors to leave + the loop they are parked in by the boot ROM. + +properties: + compatible: + items: + - enum: + - sstar,ssd201-smpctrl # SSD201/SSD202D + - const: mstar,smpctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + smpctrl@204000 { + compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl"; + reg = <0x204000 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml index 7c787405bb2f..61d08c473eb8 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml @@ -20,6 +20,12 @@ properties: - thingyjp,breadbee-crust # thingy.jp BreadBee Crust - const: mstar,infinity + - description: infinity2m boards + items: + - enum: + - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit + - const: mstar,infinity2m + - description: infinity3 boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index ff94c45eefb0..fe11be65039a 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -245,6 +245,7 @@ properties: - enum: - renesas,r8a7795 - renesas,r8a7796 + - renesas,r8a77961 - renesas,r8a77965 - description: R-Car M3-N (R8A77965) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index b621752aaa65..ef4544ad6f82 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -70,6 +70,24 @@ properties: - const: elgin,rv1108-r1 - const: rockchip,rv1108 + - description: Engicam PX30.Core C.TOUCH 2.0 + items: + - const: engicam,px30-core-ctouch2 + - const: engicam,px30-core + - const: rockchip,px30 + + - description: Engicam PX30.Core C.TOUCH 2.0 10.1" Open Frame + items: + - const: engicam,px30-core-ctouch2-of10 + - const: engicam,px30-core + - const: rockchip,px30 + + - description: Engicam PX30.Core EDIMM2.2 Starter Kit + items: + - const: engicam,px30-core-edimm2.2 + - const: engicam,px30-core + - const: rockchip,px30 + - description: Firefly Firefly-RK3288 items: - enum: @@ -381,6 +399,11 @@ properties: - khadas,edge-v - const: rockchip,rk3399 + - description: Kobol Helios64 + items: + - const: kobol,helios64 + - const: rockchip,rk3399 + - description: Mecer Xtreme Mini S6 items: - const: mecer,xms6 diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 272508010b02..0796f0c87727 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -14,6 +14,19 @@ properties: const: '/' compatible: oneOf: + - description: S3C2416 based boards + items: + - enum: + - samsung,smdk2416 # Samsung SMDK2416 + - const: samsung,s3c2416 + + - description: S3C6410 based boards + items: + - enum: + - friendlyarm,mini6410 # FriendlyARM Mini6410 + - samsung,smdk6410 # Samsung SMDK6410 + - const: samsung,s3c6410 + - description: S5PV210 based boards items: - enum: @@ -83,6 +96,14 @@ properties: - const: samsung,exynos4412 - const: samsung,exynos4 + - description: Samsung p4note family boards + items: + - enum: + - samsung,n8010 # Samsung GT-N8010/GT-N8013 + - const: samsung,p4note + - const: samsung,exynos4412 + - const: samsung,exynos4 + - description: Exynos5250 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index 6634b3e0853e..149afb5df5af 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -21,6 +21,10 @@ properties: - st,stm32-power-config - st,stm32-tamp - const: syscon + - items: + - const: st,stm32-tamp + - const: syscon + - const: simple-mfd reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 009b424e456e..e7525a3395e5 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -14,6 +14,20 @@ properties: const: "/" compatible: oneOf: + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - dh,stm32mp153c-dhcom-drc02 + - dh,stm32mp157c-dhcom-pdk2 + - dh,stm32mp157c-dhcom-picoitx + - enum: + - dh,stm32mp153c-dhcom-som + - dh,stm32mp157a-dhcor-som + - dh,stm32mp157c-dhcom-som + - enum: + - st,stm32mp153 + - st,stm32mp157 - items: - enum: - st,stm32f429i-disco @@ -39,8 +53,6 @@ properties: - const: st,stm32h743 - items: - enum: - - arrow,stm32mp157a-avenger96 # Avenger96 - - lxa,stm32mp157c-mc1 - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 @@ -52,6 +64,13 @@ properties: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: Octavo OSD32MP15x System-in-Package based boards + items: + - enum: + - lxa,stm32mp157c-mc1 # Linux Automation MC-1 + - const: oct,stm32mp15xx-osd32 + - enum: + - st,stm32mp157 - description: Odyssey STM32MP1 SoM based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index cab8e1b6417b..6db32fbf813f 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -201,6 +201,19 @@ properties: - const: dserve,dsrv9703c - const: allwinner,sun4i-a10 + - description: Elimo Engineering Impetus SoM + items: + - const: elimo,impetus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + + - description: Elimo Engineering Initium + items: + - const: elimo,initium + - const: elimo,impetus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + - description: Empire Electronix D709 Tablet items: - const: empire-electronix,d709 @@ -251,6 +264,16 @@ properties: - const: friendlyarm,nanopi-neo-plus2 - const: allwinner,sun50i-h5 + - description: FriendlyARM NanoPi R1 + items: + - const: friendlyarm,nanopi-r1 + - const: allwinner,sun8i-h3 + + - description: FriendlyARM ZeroPi + items: + - const: friendlyarm,zeropi + - const: allwinner,sun8i-h3 + - description: Gemei G9 Tablet items: - const: gemei,g9 diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 767e86354c8e..c5fbf869aa93 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -72,6 +72,9 @@ properties: - const: asus,grouper - const: nvidia,tegra30 - items: + - const: ouya,ouya + - const: nvidia,tegra30 + - items: - enum: - nvidia,dalmore - nvidia,roth diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt deleted file mode 100644 index 3108d03802ee..000000000000 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt +++ /dev/null @@ -1,44 +0,0 @@ -NVIDIA Tegra ACONNECT Bus - -The Tegra ACONNECT bus is an AXI switch which is used to connnect various -components inside the Audio Processing Engine (APE). All CPU accesses to -the APE subsystem go through the ACONNECT via an APB to AXI wrapper. - -Required properties: -- compatible: Must be "nvidia,tegra210-aconnect". -- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE), - and APE interface clock (TEGRA210_CLK_APB2APE). -- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding - 'clocks' entries. -- power-domains: Must contain a phandle that points to the audio powergate - (namely 'aud') for Tegra210. -- #address-cells: The number of cells used to represent physical base addresses - in the aconnect address space. Should be 1. -- #size-cells: The number of cells used to represent the size of an address - range in the aconnect address space. Should be 1. -- ranges: Mapping of the aconnect address space to the CPU address space. - -All devices accessed via the ACONNNECT are described by child-nodes. - -Example: - - aconnect@702c0000 { - compatible = "nvidia,tegra210-aconnect"; - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - clock-names = "ape", "apb2ape"; - power-domains = <&pd_audio>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; - - - child1 { - ... - }; - - child2 { - ... - }; - }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml new file mode 100644 index 000000000000..7b1a08c62aef --- /dev/null +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/nvidia,tegra210-aconnect.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra ACONNECT Bus + +description: | + The Tegra ACONNECT bus is an AXI switch which is used to connnect various + components inside the Audio Processing Engine (APE). All CPU accesses to + the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All + devices accessed via the ACONNNECT are described by child-nodes. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-aconnect + - items: + - enum: + - nvidia,tegra186-aconnect + - nvidia,tegra194-aconnect + - const: nvidia,tegra210-aconnect + + clocks: + items: + - description: Must contain the entry for APE clock + - description: Must contain the entry for APE interface clock + + clock-names: + items: + - const: ape + - const: apb2ape + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "@[0-9a-f]+$": + type: object + +required: + - compatible + - clocks + - clock-names + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include<dt-bindings/clock/tegra210-car.h> + + aconnect@702c0000 { + compatible = "nvidia,tegra210-aconnect"; + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&pd_audio>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x702c0000 0x702c0000 0x00040000>; + + // Child device nodes follow ... + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 33f3010f48c3..e709e530e17a 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -21,27 +21,58 @@ description: | The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See the full list of clock IDs from: - include/dt-bindings/clock/imx8-clock.h + include/dt-bindings/clock/imx8-lpcg.h properties: compatible: - enum: - - fsl,imx8qxp-lpcg-adma - - fsl,imx8qxp-lpcg-conn - - fsl,imx8qxp-lpcg-dc - - fsl,imx8qxp-lpcg-dsp - - fsl,imx8qxp-lpcg-gpu - - fsl,imx8qxp-lpcg-hsio - - fsl,imx8qxp-lpcg-img - - fsl,imx8qxp-lpcg-lsio - - fsl,imx8qxp-lpcg-vpu - + oneOf: + - const: fsl,imx8qxp-lpcg + - items: + - enum: + - fsl,imx8qm-lpcg + - const: fsl,imx8qxp-lpcg + - enum: + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu + deprecated: true reg: maxItems: 1 '#clock-cells': const: 1 + clocks: + description: | + Input parent clocks phandle array for each clock + minItems: 1 + maxItems: 8 + + clock-indices: + description: | + An integer array indicating the bit offset for each clock. + Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the + supported LPCG clock indices. + minItems: 1 + maxItems: 8 + + clock-output-names: + description: | + Shall be the corresponding names of the outputs. + NOTE this property must be specified in the same order + as the clock-indices property. + minItems: 1 + maxItems: 8 + + power-domains: + maxItems: 1 + required: - compatible - reg @@ -51,23 +82,33 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/imx8-clock.h> + #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; + sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; #clock-cells = <1>; + clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, + <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; }; mmc@5b010000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>, + <&sdhc0_lpcg IMX_LPCG_CLK_5>; clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_0>; }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 62781518aefc..a84464b3e1f2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -93,6 +93,24 @@ properties: - device - dual + typec-power-opmode: + description: Determines the power operation mode that the Type C connector + will support and will advertise through CC pins when it has no power + delivery support. + - "default" corresponds to default USB voltage and current defined by the + USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and + 5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane + operation respectively. + - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB + Type-C Cable and Connector specification, when Power Delivery is not + supported. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - default + - 1.5A + - 3.0A + # The following are optional properties for "usb-c-connector" with power # delivery support. source-pdos: @@ -192,6 +210,12 @@ allOf: type: const: micro +anyOf: + - not: + required: + - typec-power-opmode + - new-source-frs-typec-current + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt deleted file mode 100644 index 245d3063715c..000000000000 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt +++ /dev/null @@ -1,56 +0,0 @@ -* NVIDIA Tegra Audio DMA (ADMA) controller - -The Tegra Audio DMA controller that is used for transferring data -between system memory and the Audio Processing Engine (APE). - -Required properties: -- compatible: Should contain one of the following: - - "nvidia,tegra210-adma": for Tegra210 - - "nvidia,tegra186-adma": for Tegra186 and Tegra194 -- reg: Should contain DMA registers location and length. This should be - a single entry that includes all of the per-channel registers in one - contiguous bank. -- interrupts: Should contain all of the per-channel DMA interrupts in - ascending order with respect to the DMA channel index. -- clocks: Must contain one entry for the ADMA module clock - (TEGRA210_CLK_D_AUDIO). -- clock-names: Must contain the name "d_audio" for the corresponding - 'clocks' entry. -- #dma-cells : Must be 1. The first cell denotes the receive/transmit - request number and should be between 1 and the maximum number of - requests supported. This value corresponds to the RX/TX_REQUEST_SELECT - fields in the ADMA_CHn_CTRL register. - - -Example: - -adma: dma@702e2000 { - compatible = "nvidia,tegra210-adma"; - reg = <0x0 0x702e2000 0x0 0x2000>; - interrupt-parent = <&tegra_agic>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; - clock-names = "d_audio"; - #dma-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml new file mode 100644 index 000000000000..5c2e2f156e31 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/nvidia,tegra210-adma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Audio DMA (ADMA) controller + +description: | + The Tegra Audio DMA controller is used for transferring data + between system memory and the Audio Processing Engine (APE). + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra210-adma + - nvidia,tegra186-adma + - items: + - const: nvidia,tegra194-adma + - const: nvidia,tegra186-adma + + reg: + maxItems: 1 + + interrupts: + description: | + Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. + minItems: 1 + maxItems: 32 + + clocks: + description: Must contain one entry for the ADMA module clock + maxItems: 1 + + clock-names: + const: d_audio + + "#dma-cells": + description: | + The first cell denotes the receive/transmit request number and + should be between 1 and the maximum number of requests supported. + This value corresponds to the RX/TX_REQUEST_SELECT fields in the + ADMA_CHn_CTRL register. + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include<dt-bindings/clock/tegra210-car.h> + + dma-controller@702e2000 { + compatible = "nvidia,tegra210-adma"; + reg = <0x702e2000 0x2000>; + interrupt-parent = <&tegra_agic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "d_audio"; + #dma-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 06889963dfb7..ba282f4c9fd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -35,7 +35,6 @@ properties: - arm,gic-400 - arm,pl390 - arm,tc11mp-gic - - nvidia,tegra210-agic - qcom,msm-8660-qgic - qcom,msm-qgic2 @@ -53,6 +52,14 @@ properties: - const: brcm,brahma-b15-gic - const: arm,cortex-a15-gic + - oneOf: + - const: nvidia,tegra210-agic + - items: + - enum: + - nvidia,tegra186-agic + - nvidia,tegra194-agic + - const: nvidia,tegra210-agic + interrupt-controller: true "#address-cells": diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt deleted file mode 100644 index f1487a751b1a..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ /dev/null @@ -1,149 +0,0 @@ -Broadcom BCM53xx Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of: "brcm,bcm5325" - "brcm,bcm53115" - "brcm,bcm53125" - "brcm,bcm53128" - "brcm,bcm5365" - "brcm,bcm5395" - "brcm,bcm5389" - "brcm,bcm5397" - "brcm,bcm5398" - - For the BCM11360 SoC, must be: - "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string - - For the BCM5310x SoCs with an integrated switch, must be one of: - "brcm,bcm53010-srab" - "brcm,bcm53011-srab" - "brcm,bcm53012-srab" - "brcm,bcm53018-srab" - "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string - - For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of: - "brcm,bcm11404-srab" - "brcm,bcm11407-srab" - "brcm,bcm11409-srab" - "brcm,bcm58310-srab" - "brcm,bcm58311-srab" - "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string - - For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of: - "brcm,bcm58522-srab" - "brcm,bcm58523-srab" - "brcm,bcm58525-srab" - "brcm,bcm58622-srab" - "brcm,bcm58623-srab" - "brcm,bcm58625-srab" - "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string - - For the BCM63xx/33xx SoCs with an integrated switch, must be one of: - "brcm,bcm3384-switch" - "brcm,bcm6328-switch" - "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" - -Required properties for BCM585xx/586xx/88312 SoCs: - - - reg: a total of 3 register base addresses, the first one must be the - Switch Register Access block base, the second is the port 5/4 mux - configuration register and the third one is the SGMII configuration - and status register base address. - - - interrupts: a total of 13 interrupts must be specified, in the following - order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, - then the timestamping interrupt and the sleep timer interrupts for ports - 5,7,8. - -Optional properties for BCM585xx/586xx/88312 SoCs: - - - reg-names: a total of 3 names matching the 3 base register address, must - be in the following order: - "srab" - "mux_config" - "sgmii_config" - - - interrupt-names: a total of 13 names matching the 13 interrupts specified - must be in the following order: - "link_state_p0" - "link_state_p1" - "link_state_p2" - "link_state_p3" - "link_state_p4" - "link_state_p5" - "link_state_p7" - "link_state_p8" - "phy" - "ts" - "imp_sleep_timer_p5" - "imp_sleep_timer_p7" - "imp_sleep_timer_p8" - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via MDIO to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - compatible = "brcm,unimac"; - reg = <0x10001000 0x1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio0: mdio@10000000 { - compatible = "brcm,unimac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - switch0: ethernet-switch@1e { - compatible = "brcm,bcm53125"; - reg = <30>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - reg = <0>; - label = "lan1"; - }; - - port1@1 { - reg = <1>; - label = "lan2"; - }; - - port5@5 { - reg = <5>; - label = "cable-modem"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - }; - - port8@8 { - reg = <8>; - label = "cpu"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - ethernet = <ð0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml new file mode 100644 index 000000000000..c3c938893ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53xx Ethernet switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + Broadcom BCM53xx Ethernet switches + +properties: + compatible: + oneOf: + - const: brcm,bcm5325 + - const: brcm,bcm53115 + - const: brcm,bcm53125 + - const: brcm,bcm53128 + - const: brcm,bcm5365 + - const: brcm,bcm5395 + - const: brcm,bcm5389 + - const: brcm,bcm5397 + - const: brcm,bcm5398 + - items: + - const: brcm,bcm11360-srab + - const: brcm,cygnus-srab + - items: + - enum: + - brcm,bcm53010-srab + - brcm,bcm53011-srab + - brcm,bcm53012-srab + - brcm,bcm53018-srab + - brcm,bcm53019-srab + - const: brcm,bcm5301x-srab + - items: + - enum: + - brcm,bcm11404-srab + - brcm,bcm11407-srab + - brcm,bcm11409-srab + - brcm,bcm58310-srab + - brcm,bcm58311-srab + - brcm,bcm58313-srab + - const: brcm,omega-srab + - items: + - enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + - const: brcm,nsp-srab + - items: + - enum: + - brcm,bcm3384-switch + - brcm,bcm6328-switch + - brcm,bcm6368-switch + - const: brcm,bcm63xx-switch + +required: + - compatible + - reg + +# BCM585xx/586xx/88312 SoCs +if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab +then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts +else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "cable-modem"; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + label = "cpu"; + phy-mode = "rgmii-txid"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + axi { + #address-cells = <1>; + #size-cells = <1>; + + switch@36000 { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii_config"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index a765ceba28c6..8e044631bcf7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -20,7 +20,7 @@ select: false properties: $nodename: - pattern: "^switch(@.*)?$" + pattern: "^(ethernet-)?switch(@.*)?$" dsa,member: minItems: 2 @@ -78,6 +78,10 @@ patternProperties: mac-address: true + sfp: true + + managed: true + required: - reg diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index fdf709817218..cc93063a8f39 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -95,6 +95,7 @@ properties: # 10GBASE-KR, XFI, SFI - 10gbase-kr - usxgmii + - 10gbase-r phy-mode: $ref: "#/properties/phy-connection-type" diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml new file mode 100644 index 000000000000..2159b7d1f537 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DPAA2 MAC bindings + +maintainers: + - Ioana Ciornei <ioana.ciornei@nxp.com> + +description: + This binding represents the DPAA2 MAC objects found on the fsl-mc bus and + located under the 'dpmacs' node for the fsl-mc bus DTS node. + +allOf: + - $ref: "ethernet-controller.yaml#" + +properties: + compatible: + const: fsl,qoriq-mc-dpmac + + reg: + maxItems: 1 + description: The DPMAC number + + phy-handle: true + + phy-connection-type: true + + phy-mode: true + + pcs-handle: + $ref: /schemas/types.yaml#definitions/phandle + description: + A reference to a node representing a PCS PHY device found on + the internal MDIO bus. + + managed: true + +required: + - reg + +additionalProperties: false + +examples: + - | + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt index 8763f448c376..90d38f710635 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt @@ -99,7 +99,7 @@ Example: nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,lpdr = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml new file mode 100644 index 000000000000..fd12bafe3548 --- /dev/null +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -0,0 +1,293 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Power Domains Controller + +maintainers: + - Weiyi Lu <weiyi.lu@mediatek.com> + - Matthias Brugger <mbrugger@suse.com> + +description: | + Mediatek processors include support for multiple power domains which can be + powered up/down by software based on different application scenes to save power. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle for SCPSYS node representing the domain. + +properties: + $nodename: + const: power-controller + + compatible: + enum: + - mediatek,mt8173-power-controller + - mediatek,mt8183-power-controller + - mediatek,mt8192-power-controller + + '#power-domain-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^power-domain@[0-9a-f]+$": + type: object + description: | + Represents the power domains within the power controller node as documented + in Documentation/devicetree/bindings/power/power-domain.yaml. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + description: | + Power domain index. Valid values are defined in: + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain. + "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain. + "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain. + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + mediatek,infracfg: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the SMI register range. + + patternProperties: + "^power-domain@[0-9a-f]+$": + type: object + description: | + Represents a power domain child within a power domain parent node. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + mediatek,infracfg: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the SMI register range. + + patternProperties: + "^power-domain@[0-9a-f]+$": + type: object + description: | + Represents a power domain child within a power domain parent node. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + mediatek,infracfg: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#definitions/phandle + description: phandle to the device containing the SMI register range. + + required: + - reg + + additionalProperties: false + + required: + - reg + + additionalProperties: false + + required: + - reg + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + spm: power-controller { + compatible = "mediatek,mt8173-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT8173_POWER_DOMAIN_VDEC { + reg = <MT8173_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC { + reg = <MT8173_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "mm", "venc"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_ISP { + reg = <MT8173_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MM { + reg = <MT8173_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC_LT { + reg = <MT8173_POWER_DOMAIN_VENC_LT>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mm", "venclt"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_AUDIO { + reg = <MT8173_POWER_DOMAIN_AUDIO>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_USB { + reg = <MT8173_POWER_DOMAIN_USB>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC { + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&clk26m>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG_2D { + reg = <MT8173_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG { + reg = <MT8173_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml new file mode 100644 index 000000000000..9a51efa9d101 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STUSB160x Type-C controller bindings + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +properties: + compatible: + enum: + - st,stusb1600 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: main power supply (4.1V-22V) + + vsys-supply: + description: low power supply (3.0V-5.5V) + + vconn-supply: + description: power supply (2.7V-5.5V) used to supply VConn on CC pin in + source or dual power role + + connector: + type: object + + allOf: + - $ref: ../connector/usb-connector.yaml + + properties: + compatible: + const: usb-c-connector + + power-role: true + + typec-power-opmode: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + typec: stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + vdd-supply = <&vbus_drd>; + vsys-supply = <&vdd_usb>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + typec-power-opmode = "default"; + + port { + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 57f5f312e949..49e888a1467e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -25,6 +25,8 @@ patternProperties: # Keep list in alphabetical order. "^70mai,.*": description: 70mai Co., Ltd. + "^abb,.*": + description: ABB "^abilis,.*": description: Abilis Systems "^abracon,.*": @@ -67,6 +69,8 @@ patternProperties: description: AlphaScale Integrated Circuits Systems, Inc. "^alps,.*": description: Alps Electric Co., Ltd. + "^alt,.*": + description: Altus-Escon-Company BV "^altr,.*": description: Altera Corp. "^amarula,.*": @@ -319,10 +323,14 @@ patternProperties: description: Einfochips "^elan,.*": description: Elan Microelectronic Corp. + "^element14,.*": + description: Element14 (A Premier Farnell Company) "^elgin,.*": description: Elgin S/A. "^elida,.*": description: Shenzhen Elida Technology Co., Ltd. + "^elimo,.*": + description: Elimo Engineering Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. "^emlid,.*": @@ -459,6 +467,8 @@ patternProperties: description: Holt Integrated Circuits, Inc. "^honeywell,.*": description: Honeywell + "^honestar,.*": + description: Honestar Technologies Co., Ltd. "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": @@ -561,6 +571,8 @@ patternProperties: description: Kionix, Inc. "^kobo,.*": description: Rakuten Kobo Inc. + "^kobol,.*": + description: Kobol Innovations Pte. Ltd. "^koe,.*": description: Kaohsiung Opto-Electronics Inc. "^kontron,.*": @@ -679,6 +691,8 @@ patternProperties: description: Micron Technology Inc. "^microsoft,.*": description: Microsoft Corporation + "^microsys,.*": + description: MicroSys Electronics GmbH "^mikroe,.*": description: MikroElektronika d.o.o. "^mikrotik,.*": @@ -772,6 +786,8 @@ patternProperties: description: NXP Semiconductors "^oceanic,.*": description: Oceanic Systems (UK) Ltd. + "^oct,.*": + description: Octavo Systems LLC "^okaya,.*": description: Okaya Electric America, Inc. "^oki,.*": @@ -804,6 +820,8 @@ patternProperties: description: Ortus Technology Co., Ltd. "^osddisplays,.*": description: OSD Displays + "^ouya,.*": + description: Ouya Inc. "^overkiz,.*": description: Overkiz SAS "^ovti,.*": @@ -906,6 +924,8 @@ patternProperties: description: iMX6 Rex Project "^rervision,.*": description: Shenzhen Rervision Technology Co., Ltd. + "^revotics,.*": + description: Revolution Robotics, Inc. (Revotics) "^richtek,.*": description: Richtek Technology Corporation "^ricoh,.*": @@ -1154,12 +1174,16 @@ patternProperties: description: Vamrs Ltd. "^variscite,.*": description: Variscite Ltd. + "^vdl,.*": + description: Van der Laan b.v. "^via,.*": description: VIA Technologies, Inc. "^videostrong,.*": description: Videostrong Technology Co., Ltd. "^virtio,.*": description: Virtual I/O Device Specification, developed by the OASIS consortium + "^virtual,.*": + description: Used for virtual device without specific vendor. "^vishay,.*": description: Vishay Intertechnology, Inc "^vitesse,.*": diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml index 991b4e33486e..fb7695515be1 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -18,10 +18,26 @@ properties: - const: fsl,imx21-wdt - items: - enum: + - fsl,imx25-wdt + - fsl,imx27-wdt + - fsl,imx31-wdt + - fsl,imx35-wdt + - fsl,imx50-wdt + - fsl,imx51-wdt + - fsl,imx53-wdt + - fsl,imx6q-wdt + - fsl,imx6sl-wdt + - fsl,imx6sll-wdt + - fsl,imx6sx-wdt + - fsl,imx6ul-wdt + - fsl,imx7d-wdt - fsl,imx8mm-wdt - fsl,imx8mn-wdt - fsl,imx8mp-wdt - fsl,imx8mq-wdt + - fsl,ls1012a-wdt + - fsl,ls1043a-wdt + - fsl,vf610-wdt - const: fsl,imx21-wdt reg: |