summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/networking/dpaa.txt194
1 files changed, 194 insertions, 0 deletions
diff --git a/Documentation/networking/dpaa.txt b/Documentation/networking/dpaa.txt
new file mode 100644
index 000000000000..76e016d4d344
--- /dev/null
+++ b/Documentation/networking/dpaa.txt
@@ -0,0 +1,194 @@
+The QorIQ DPAA Ethernet Driver
+==============================
+
+Authors:
+Madalin Bucur <madalin.bucur@nxp.com>
+Camelia Groza <camelia.groza@nxp.com>
+
+Contents
+========
+
+ - DPAA Ethernet Overview
+ - DPAA Ethernet Supported SoCs
+ - Configuring DPAA Ethernet in your kernel
+ - DPAA Ethernet Frame Processing
+ - DPAA Ethernet Features
+ - Debugging
+
+DPAA Ethernet Overview
+======================
+
+DPAA stands for Data Path Acceleration Architecture and it is a
+set of networking acceleration IPs that are available on several
+generations of SoCs, both on PowerPC and ARM64.
+
+The Freescale DPAA architecture consists of a series of hardware blocks
+that support Ethernet connectivity. The Ethernet driver depends upon the
+following drivers in the Linux kernel:
+
+ - Peripheral Access Memory Unit (PAMU) (* needed only for PPC platforms)
+ drivers/iommu/fsl_*
+ - Frame Manager (FMan)
+ drivers/net/ethernet/freescale/fman
+ - Queue Manager (QMan), Buffer Manager (BMan)
+ drivers/soc/fsl/qbman
+
+A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
+
+ dpaa_eth /eth0\ ... /ethN\
+ driver | | | |
+ ------------- ---- ----------- ---- -------------
+ -Ports / Tx Rx \ ... / Tx Rx \
+ FMan | | | |
+ -MACs | MAC0 | | MACN |
+ / dtsec0 \ ... / dtsecN \ (or tgec)
+ / \ / \(or memac)
+ --------- -------------- --- -------------- ---------
+ FMan, FMan Port, FMan SP, FMan MURAM drivers
+ ---------------------------------------------------------
+ FMan HW blocks: MURAM, MACs, Ports, SP
+ ---------------------------------------------------------
+
+The dpaa_eth relation to the QMan, BMan and FMan:
+ ________________________________
+ dpaa_eth / eth0 \
+ driver / \
+ --------- -^- -^- -^- --- ---------
+ QMan driver / \ / \ / \ \ / | BMan |
+ |Rx | |Rx | |Tx | |Tx | | driver |
+ --------- |Dfl| |Err| |Cnf| |FQs| | |
+ QMan HW |FQ | |FQ | |FQs| | | | |
+ / \ / \ / \ \ / | |
+ --------- --- --- --- -v- ---------
+ | FMan QMI | |
+ | FMan HW FMan BMI | BMan HW |
+ ----------------------- --------
+
+where the acronyms used above (and in the code) are:
+DPAA = Data Path Acceleration Architecture
+FMan = DPAA Frame Manager
+QMan = DPAA Queue Manager
+BMan = DPAA Buffers Manager
+QMI = QMan interface in FMan
+BMI = BMan interface in FMan
+FMan SP = FMan Storage Profiles
+MURAM = Multi-user RAM in FMan
+FQ = QMan Frame Queue
+Rx Dfl FQ = default reception FQ
+Rx Err FQ = Rx error frames FQ
+Tx Cnf FQ = Tx confirmation FQs
+Tx FQs = transmission frame queues
+dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
+tgec = ten gigabit Ethernet controller (10 Gbps)
+memac = multirate Ethernet MAC (10/100/1000/10000)
+
+DPAA Ethernet Supported SoCs
+============================
+
+The DPAA drivers enable the Ethernet controllers present on the following SoCs:
+
+# PPC
+P1023
+P2041
+P3041
+P4080
+P5020
+P5040
+T1023
+T1024
+T1040
+T1042
+T2080
+T4240
+B4860
+
+# ARM
+LS1043A
+LS1046A
+
+Configuring DPAA Ethernet in your kernel
+========================================
+
+To enable the DPAA Ethernet driver, the following Kconfig options are required:
+
+# common for arch/arm64 and arch/powerpc platforms
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_XGMAC_MDIO=y
+
+# for arch/powerpc only
+CONFIG_FSL_PAMU=y
+
+# common options needed for the PHYs used on the RDBs
+CONFIG_VITESSE_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_AQUANTIA_PHY=y
+
+DPAA Ethernet Frame Processing
+==============================
+
+On Rx, buffers for the incoming frames are retrieved from one of the three
+existing buffers pools. The driver initializes and seeds these, each with
+buffers of different sizes: 1KB, 2KB and 4KB.
+
+On Tx, all transmitted frames are returned to the driver through Tx
+confirmation frame queues. The driver is then responsible for freeing the
+buffers. In order to do this properly, a backpointer is added to the buffer
+before transmission that points to the skb. When the buffer returns to the
+driver on a confirmation FQ, the skb can be correctly consumed.
+
+DPAA Ethernet Features
+======================
+
+Currently the DPAA Ethernet driver enables the basic features required for
+a Linux Ethernet driver. The support for advanced features will be added
+gradually.
+
+The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx
+checksum offload feature is enabled by default and cannot be controlled through
+ethtool.
+
+The driver has support for multiple prioritized Tx traffic classes. Priorities
+range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with
+strict priority levels. Each traffic class contains NR_CPU TX queues. By
+default, only one traffic class is enabled and the lowest priority Tx queues
+are used. Higher priority traffic classes can be enabled with the mqprio
+qdisc. For example, all four traffic classes are enabled on an interface with
+the following command. Furthermore, skb priority levels are mapped to traffic
+classes as follows:
+
+ * priorities 0 to 3 - traffic class 0 (low priority)
+ * priorities 4 to 7 - traffic class 1 (medium-low priority)
+ * priorities 8 to 11 - traffic class 2 (medium-high priority)
+ * priorities 12 to 15 - traffic class 3 (high priority)
+
+tc qdisc add dev <int> root handle 1: \
+ mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1
+
+Debugging
+=========
+
+The following statistics are exported for each interface through ethtool:
+
+ - interrupt count per CPU
+ - Rx packets count per CPU
+ - Tx packets count per CPU
+ - Tx confirmed packets count per CPU
+ - Tx S/G frames count per CPU
+ - Tx error count per CPU
+ - Rx error count per CPU
+ - Rx error count per type
+ - congestion related statistics:
+ - congestion status
+ - time spent in congestion
+ - number of time the device entered congestion
+ - dropped packets count per cause
+
+The driver also exports the following information in sysfs:
+
+ - the FQ IDs for each FQ type
+ /sys/devices/platform/dpaa-ethernet.0/net/<int>/fqids
+
+ - the IDs of the buffer pools in use
+ /sys/devices/platform/dpaa-ethernet.0/net/<int>/bpids