diff options
Diffstat (limited to 'Documentation')
59 files changed, 1668 insertions, 163 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc index a0d18dbeb7a9..6a5fd072849d 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -32,14 +32,16 @@ Contact: linux-usb@vger.kernel.org Description: Write: - <channel> [<bpst offset>] + <channel> - to start beaconing on a specific channel, or stop - beaconing if <channel> is -1. Valid channels depends - on the radio controller's supported band groups. + to force a specific channel to be used when beaconing, + or, if <channel> is -1, to prohibit beaconing. If + <channel> is 0, then the default channel selection + algorithm will be used. Valid channels depends on the + radio controller's supported band groups. - <bpst offset> may be used to try and join a specific - beacon group if more than one was found during a scan. + Reading returns the currently active channel, or -1 if + the radio controller is not beaconing. What: /sys/class/uwb_rc/uwbN/scan Date: July 2008 diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index 7a16fe1e2270..9fe91c02ee40 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -6,7 +6,6 @@ Description: internal state of the kernel memory blocks. Files could be added or removed dynamically to represent hot-add/remove operations. - Users: hotplug memory add/remove tools https://w3.opensource.ibm.com/projects/powerpc-utils/ @@ -19,6 +18,56 @@ Description: This is useful for a user-level agent to determine identify removable sections of the memory before attempting potentially expensive hot-remove memory operation +Users: hotplug memory remove tools + https://w3.opensource.ibm.com/projects/powerpc-utils/ + +What: /sys/devices/system/memory/memoryX/phys_device +Date: September 2008 +Contact: Badari Pulavarty <pbadari@us.ibm.com> +Description: + The file /sys/devices/system/memory/memoryX/phys_device + is read-only and is designed to show the name of physical + memory device. Implementation is currently incomplete. +What: /sys/devices/system/memory/memoryX/phys_index +Date: September 2008 +Contact: Badari Pulavarty <pbadari@us.ibm.com> +Description: + The file /sys/devices/system/memory/memoryX/phys_index + is read-only and contains the section ID in hexadecimal + which is equivalent to decimal X contained in the + memory section directory name. + +What: /sys/devices/system/memory/memoryX/state +Date: September 2008 +Contact: Badari Pulavarty <pbadari@us.ibm.com> +Description: + The file /sys/devices/system/memory/memoryX/state + is read-write. When read, it's contents show the + online/offline state of the memory section. When written, + root can toggle the the online/offline state of a removable + memory section (see removable file description above) + using the following commands. + # echo online > /sys/devices/system/memory/memoryX/state + # echo offline > /sys/devices/system/memory/memoryX/state + + For example, if /sys/devices/system/memory/memory22/removable + contains a value of 1 and + /sys/devices/system/memory/memory22/state contains the + string "online" the following command can be executed by + by root to offline that section. + # echo offline > /sys/devices/system/memory/memory22/state Users: hotplug memory remove tools https://w3.opensource.ibm.com/projects/powerpc-utils/ + +What: /sys/devices/system/node/nodeX/memoryY +Date: September 2008 +Contact: Gary Hade <garyhade@us.ibm.com> +Description: + When CONFIG_NUMA is enabled + /sys/devices/system/node/nodeX/memoryY is a symbolic link that + points to the corresponding /sys/devices/system/memory/memoryY + memory section directory. For example, the following symbolic + link is created for memory section 9 on node0. + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 + diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index c74fec8c2351..b2a4d6d244d9 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -26,7 +26,7 @@ mapped only for the time they are actually used and unmapped after the DMA transfer. The following API will work of course even on platforms where no such -hardware exists, see e.g. include/asm-i386/pci.h for how it is implemented on +hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on top of the virt_to_bus interface. First of all, you should make sure diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index 627707a3cb9d..59ad69a9d777 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -74,6 +74,14 @@ !Enet/sunrpc/rpcb_clnt.c !Enet/sunrpc/clnt.c </sect1> + <sect1><title>WiMAX</title> +!Enet/wimax/op-msg.c +!Enet/wimax/op-reset.c +!Enet/wimax/op-rfkill.c +!Enet/wimax/stack.c +!Iinclude/net/wimax.h +!Iinclude/linux/wimax.h + </sect1> </chapter> <chapter id="netdev"> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index df87d1b93605..b787e4721c90 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -42,6 +42,12 @@ GPL version 2. <revhistory> <revision> + <revnumber>0.6</revnumber> + <date>2008-12-05</date> + <authorinitials>hjk</authorinitials> + <revremark>Added description of portio sysfs attributes.</revremark> + </revision> + <revision> <revnumber>0.5</revnumber> <date>2008-05-22</date> <authorinitials>hjk</authorinitials> @@ -318,6 +324,54 @@ interested in translating it, please email me offset = N * getpagesize(); </programlisting> +<para> + Sometimes there is hardware with memory-like regions that can not be + mapped with the technique described here, but there are still ways to + access them from userspace. The most common example are x86 ioports. + On x86 systems, userspace can access these ioports using + <function>ioperm()</function>, <function>iopl()</function>, + <function>inb()</function>, <function>outb()</function>, and similar + functions. +</para> +<para> + Since these ioport regions can not be mapped, they will not appear under + <filename>/sys/class/uio/uioX/maps/</filename> like the normal memory + described above. Without information about the port regions a hardware + has to offer, it becomes difficult for the userspace part of the + driver to find out which ports belong to which UIO device. +</para> +<para> + To address this situation, the new directory + <filename>/sys/class/uio/uioX/portio/</filename> was added. It only + exists if the driver wants to pass information about one or more port + regions to userspace. If that is the case, subdirectories named + <filename>port0</filename>, <filename>port1</filename>, and so on, + will appear underneath + <filename>/sys/class/uio/uioX/portio/</filename>. +</para> +<para> + Each <filename>portX/</filename> directory contains three read-only + files that show start, size, and type of the port region: +</para> +<itemizedlist> +<listitem> + <para> + <filename>start</filename>: The first port of this region. + </para> +</listitem> +<listitem> + <para> + <filename>size</filename>: The number of ports in this region. + </para> +</listitem> +<listitem> + <para> + <filename>porttype</filename>: A string describing the type of port. + </para> +</listitem> +</itemizedlist> + + </sect1> </chapter> @@ -339,12 +393,12 @@ offset = N * getpagesize(); <itemizedlist> <listitem><para> -<varname>char *name</varname>: Required. The name of your driver as +<varname>const char *name</varname>: Required. The name of your driver as it will appear in sysfs. I recommend using the name of your module for this. </para></listitem> <listitem><para> -<varname>char *version</varname>: Required. This string appears in +<varname>const char *version</varname>: Required. This string appears in <filename>/sys/class/uio/uioX/version</filename>. </para></listitem> @@ -356,6 +410,13 @@ See the description below for details. </para></listitem> <listitem><para> +<varname>struct uio_port port[ MAX_UIO_PORTS_REGIONS ]</varname>: Required +if you want to pass information about ioports to userspace. For each port +region you need to fill one of the <varname>uio_port</varname> structures. +See the description below for details. +</para></listitem> + +<listitem><para> <varname>long irq</varname>: Required. If your hardware generates an interrupt, it's your modules task to determine the irq number during initialization. If you don't have a hardware generated interrupt but @@ -448,6 +509,42 @@ Please do not touch the <varname>kobj</varname> element of <varname>struct uio_mem</varname>! It is used by the UIO framework to set up sysfs files for this mapping. Simply leave it alone. </para> + +<para> +Sometimes, your device can have one or more port regions which can not be +mapped to userspace. But if there are other possibilities for userspace to +access these ports, it makes sense to make information about the ports +available in sysfs. For each region, you have to set up a +<varname>struct uio_port</varname> in the <varname>port[]</varname> array. +Here's a description of the fields of <varname>struct uio_port</varname>: +</para> + +<itemizedlist> +<listitem><para> +<varname>char *porttype</varname>: Required. Set this to one of the predefined +constants. Use <varname>UIO_PORT_X86</varname> for the ioports found in x86 +architectures. +</para></listitem> + +<listitem><para> +<varname>unsigned long start</varname>: Required if the port region is used. +Fill in the number of the first port of this region. +</para></listitem> + +<listitem><para> +<varname>unsigned long size</varname>: Fill in the number of ports in this +region. If <varname>size</varname> is zero, the region is considered unused. +Note that you <emphasis>must</emphasis> initialize <varname>size</varname> +with zero for all unused regions. +</para></listitem> +</itemizedlist> + +<para> +Please do not touch the <varname>portio</varname> element of +<varname>struct uio_port</varname>! It is used internally by the UIO +framework to set up sysfs files for this region. Simply leave it alone. +</para> + </sect1> <sect1 id="adding_irq_handler"> diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index fd4907a2968c..7f6de6ea5b47 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -294,7 +294,8 @@ NOTE: pci_enable_device() can fail! Check the return value. pci_set_master() will enable DMA by setting the bus master bit in the PCI_COMMAND register. It also fixes the latency timer value if -it's set to something bogus by the BIOS. +it's set to something bogus by the BIOS. pci_clear_master() will +disable DMA by clearing the bus master bit. If the PCI device can use the PCI Memory-Write-Invalidate transaction, call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX index 7cb3b356b249..d6840a91e1e1 100644 --- a/Documentation/blackfin/00-INDEX +++ b/Documentation/blackfin/00-INDEX @@ -9,3 +9,6 @@ cachefeatures.txt Filesystems - Requirements for mounting the root file system. + +bfin-gpio-note.txt + - Notes in developing/using bfin-gpio driver. diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt new file mode 100644 index 000000000000..9898c7ded7d3 --- /dev/null +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -0,0 +1,71 @@ +/* + * File: Documentation/blackfin/bfin-gpio-note.txt + * Based on: + * Author: + * + * Created: $Id: bfin-gpio-note.txt 2008-11-24 16:42 grafyang $ + * Description: This file contains the notes in developing/using bfin-gpio. + * + * + * Rev: + * + * Modified: + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + */ + + +1. Blackfin GPIO introduction + + There are many GPIO pins on Blackfin. Most of these pins are muxed to + multi-functions. They can be configured as peripheral, or just as GPIO, + configured to input with interrupt enabled, or output. + + For detailed information, please see "arch/blackfin/kernel/bfin_gpio.c", + or the relevant HRM. + + +2. Avoiding resource conflict + + Followed function groups are used to avoiding resource conflict, + - Use the pin as peripheral, + int peripheral_request(unsigned short per, const char *label); + int peripheral_request_list(const unsigned short per[], const char *label); + void peripheral_free(unsigned short per); + void peripheral_free_list(const unsigned short per[]); + - Use the pin as GPIO, + int bfin_gpio_request(unsigned gpio, const char *label); + void bfin_gpio_free(unsigned gpio); + - Use the pin as GPIO interrupt, + int bfin_gpio_irq_request(unsigned gpio, const char *label); + void bfin_gpio_irq_free(unsigned gpio); + + The request functions will record the function state for a certain pin, + the free functions will clear it's function state. + Once a pin is requested, it can't be requested again before it is freed by + previous caller, otherwise kernel will dump stacks, and the request + function fail. + These functions are wrapped by other functions, most of the users need not + care. + + +3. But there are some exceptions + - Kernel permit the identical GPIO be requested both as GPIO and GPIO + interrut. + Some drivers, like gpio-keys, need this behavior. Kernel only print out + warning messages like, + bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are +configuring it as IRQ! + + Note: Consider the case that, if there are two drivers need the + identical GPIO, one of them use it as GPIO, the other use it as + GPIO interrupt. This will really cause resource conflict. So if + there is any abnormal driver behavior, please check the bfin-gpio + warning messages. + + - Kernel permit the identical GPIO be requested from the same driver twice. + + + diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 94bbc27ddd4f..9d620c153b04 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -50,16 +50,17 @@ additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets cpu_possible_map = cpu_present_map + additional_cpus (*) Option valid only for following architectures -- x86_64, ia64 +- ia64 -ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT -to determine the number of potentially hot-pluggable cpus. The implementation -should only rely on this to count the # of cpus, but *MUST* not rely on the -apicid values in those tables for disabled apics. In the event BIOS doesn't -mark such hot-pluggable cpus as disabled entries, one could use this -parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map. +ia64 uses the number of disabled local apics in ACPI tables MADT to +determine the number of potentially hot-pluggable cpus. The implementation +should only rely on this to count the # of cpus, but *MUST* not rely +on the apicid values in those tables for disabled apics. In the event +BIOS doesn't mark such hot-pluggable cpus as disabled entries, one could +use this parameter "additional_cpus=x" to represent those cpus in the +cpu_possible_map. -possible_cpus=n [s390 only] use this to set hotpluggable cpus. +possible_cpus=n [s390,x86_64] use this to set hotpluggable cpus. This option sets possible_cpus bits in cpu_possible_map. Thus keeping the numbers of bits set constant even if the machine gets rebooted. diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index bd699da24666..45932ec21cee 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -31,3 +31,51 @@ not defined by include/asm-XXX/topology.h: 2) core_id: 0 3) thread_siblings: just the given CPU 4) core_siblings: just the given CPU + +Additionally, cpu topology information is provided under +/sys/devices/system/cpu and includes these files. The internal +source for the output is in brackets ("[]"). + + kernel_max: the maximum cpu index allowed by the kernel configuration. + [NR_CPUS-1] + + offline: cpus that are not online because they have been + HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit + of cpus allowed by the kernel configuration (kernel_max + above). [~cpu_online_mask + cpus >= NR_CPUS] + + online: cpus that are online and being scheduled [cpu_online_mask] + + possible: cpus that have been allocated resources and can be + brought online if they are present. [cpu_possible_mask] + + present: cpus that have been identified as being present in the + system. [cpu_present_mask] + +The format for the above output is compatible with cpulist_parse() +[see <linux/cpumask.h>]. Some examples follow. + +In this example, there are 64 cpus in the system but cpus 32-63 exceed +the kernel max which is limited to 0..31 by the NR_CPUS config option +being 32. Note also that cpus 2 and 4-31 are not online but could be +brought online as they are both present and possible. + + kernel_max: 31 + offline: 2,4-31,32-63 + online: 0-1,3 + possible: 0-31 + present: 0-31 + +In this example, the NR_CPUS config option is 128, but the kernel was +started with possible_cpus=144. There are 4 cpus in the system and cpu2 +was manually taken offline (and is the only cpu that can be brought +online.) + + kernel_max: 127 + offline: 2,4-127,128-143 + online: 0-1,3 + possible: 0-127 + present: 0-3 + +See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter +as well as more information on the various cpumask's. diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 2c0d631de0cf..c11b931f8f98 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -81,8 +81,8 @@ Until this step is completed the driver cannot be unloaded. Also echoing either mono ,packet or init in to image_type will free up the memory allocated by the driver. -If an user by accident executes steps 1 and 3 above without executing step 2; -it will make the /sys/class/firmware/dell_rbu/ entries to disappear. +If a user by accident executes steps 1 and 3 above without executing step 2; +it will make the /sys/class/firmware/dell_rbu/ entries disappear. The entries can be recreated by doing the following echo init > /sys/devices/platform/dell_rbu/image_type NOTE: echoing init in image_type does not change it original value. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index dc7c681e532c..5ddbe350487a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -310,17 +310,28 @@ Who: Krzysztof Piotr Oledzki <ole@ans.pl> --------------------------- -What: ide-scsi (BLK_DEV_IDESCSI) -When: 2.6.29 -Why: The 2.6 kernel supports direct writing to ide CD drives, which - eliminates the need for ide-scsi. The new method is more - efficient in every way. -Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> - ---------------------------- - What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client() When: 2.6.29 (ideally) or 2.6.30 (more likely) Why: Deprecated by the new (standard) device driver binding model. Use i2c_driver->probe() and ->remove() instead. Who: Jean Delvare <khali@linux-fr.org> + +--------------------------- + +What: fscher and fscpos drivers +When: June 2009 +Why: Deprecated by the new fschmd driver. +Who: Hans de Goede <hdegoede@redhat.com> + Jean Delvare <khali@linux-fr.org> + +--------------------------- + +What: SELinux "compat_net" functionality +When: 2.6.30 at the earliest +Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" + network access control functionality of SELinux. Secmark offers both + better performance and greater flexibility than the "compat_net" + mechanism. Now that the major Linux distributions have moved to + Secmark, it is time to deprecate the older mechanism and start the + process of removing the old code. +Who: Paul Moore <paul.moore@hp.com> diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index ccec55394380..cfbfa15a46ba 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -397,7 +397,7 @@ prototypes: }; locking rules: - All except ->poll() may block. + All may block. BKL llseek: no (see below) read: no diff --git a/Documentation/filesystems/devpts.txt b/Documentation/filesystems/devpts.txt new file mode 100644 index 000000000000..68dffd87f9b7 --- /dev/null +++ b/Documentation/filesystems/devpts.txt @@ -0,0 +1,132 @@ + +To support containers, we now allow multiple instances of devpts filesystem, +such that indices of ptys allocated in one instance are independent of indices +allocated in other instances of devpts. + +To preserve backward compatibility, this support for multiple instances is +enabled only if: + + - CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, and + - '-o newinstance' mount option is specified while mounting devpts + +IOW, devpts now supports both single-instance and multi-instance semantics. + +If CONFIG_DEVPTS_MULTIPLE_INSTANCES=n, there is no change in behavior and +this referred to as the "legacy" mode. In this mode, the new mount options +(-o newinstance and -o ptmxmode) will be ignored with a 'bogus option' message +on console. + +If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and devpts is mounted without the +'newinstance' option (as in current start-up scripts) the new mount binds +to the initial kernel mount of devpts. This mode is referred to as the +'single-instance' mode and the current, single-instance semantics are +preserved, i.e PTYs are common across the system. + +The only difference between this single-instance mode and the legacy mode +is the presence of new, '/dev/pts/ptmx' node with permissions 0000, which +can safely be ignored. + +If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and 'newinstance' option is specified, +the mount is considered to be in the multi-instance mode and a new instance +of the devpts fs is created. Any ptys created in this instance are independent +of ptys in other instances of devpts. Like in the single-instance mode, the +/dev/pts/ptmx node is present. To effectively use the multi-instance mode, +open of /dev/ptmx must be a redirected to '/dev/pts/ptmx' using a symlink or +bind-mount. + +Eg: A container startup script could do the following: + + $ chmod 0666 /dev/pts/ptmx + $ rm /dev/ptmx + $ ln -s pts/ptmx /dev/ptmx + $ ns_exec -cm /bin/bash + + # We are now in new container + + $ umount /dev/pts + $ mount -t devpts -o newinstance lxcpts /dev/pts + $ sshd -p 1234 + +where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs +/bin/bash in the child process. A pty created by the sshd is not visible in +the original mount of /dev/pts. + +User-space changes +------------------ + +In multi-instance mode (i.e '-o newinstance' mount option is specified at least +once), following user-space issues should be noted. + +1. If -o newinstance mount option is never used, /dev/pts/ptmx can be ignored + and no change is needed to system-startup scripts. + +2. To effectively use multi-instance mode (i.e -o newinstance is specified) + administrators or startup scripts should "redirect" open of /dev/ptmx to + /dev/pts/ptmx using either a bind mount or symlink. + + $ mount -t devpts -o newinstance devpts /dev/pts + + followed by either + + $ rm /dev/ptmx + $ ln -s pts/ptmx /dev/ptmx + $ chmod 666 /dev/pts/ptmx + or + $ mount -o bind /dev/pts/ptmx /dev/ptmx + +3. The '/dev/ptmx -> pts/ptmx' symlink is the preferred method since it + enables better error-reporting and treats both single-instance and + multi-instance mounts similarly. + + But this method requires that system-startup scripts set the mode of + /dev/pts/ptmx correctly (default mode is 0000). The scripts can set the + mode by, either + + - adding ptmxmode mount option to devpts entry in /etc/fstab, or + - using 'chmod 0666 /dev/pts/ptmx' + +4. If multi-instance mode mount is needed for containers, but the system + startup scripts have not yet been updated, container-startup scripts + should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single- + instance mounts. + + Or, in general, container-startup scripts should use: + + mount -t devpts -o newinstance -o ptmxmode=0666 devpts /dev/pts + if [ ! -L /dev/ptmx ]; then + mount -o bind /dev/pts/ptmx /dev/ptmx + fi + + When all devpts mounts are multi-instance, /dev/ptmx can permanently be + a symlink to pts/ptmx and the bind mount can be ignored. + +5. A multi-instance mount that is not accompanied by the /dev/ptmx to + /dev/pts/ptmx redirection would result in an unusable/unreachable pty. + + mount -t devpts -o newinstance lxcpts /dev/pts + + immediately followed by: + + open("/dev/ptmx") + + would create a pty, say /dev/pts/7, in the initial kernel mount. + But /dev/pts/7 would be invisible in the new mount. + +6. The permissions for /dev/pts/ptmx node should be specified when mounting + /dev/pts, using the '-o ptmxmode=%o' mount option (default is 0000). + + mount -t devpts -o newinstance -o ptmxmode=0644 devpts /dev/pts + + The permissions can be later be changed as usual with 'chmod'. + + chmod 666 /dev/pts/ptmx + +7. A mount of devpts without the 'newinstance' option results in binding to + initial kernel mount. This behavior while preserving legacy semantics, + does not provide strict isolation in a container environment. i.e by + mounting devpts without the 'newinstance' option, a container could + get visibility into the 'host' or root container's devpts. + + To workaround this and have strict isolation, all mounts of devpts, + including the mount in the root container, should use the newinstance + option. diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 67310fbbb7df..c2a0871280a0 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -31,7 +31,6 @@ Features which OCFS2 does not support yet: - quotas - Directory change notification (F_NOTIFY) - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) - - POSIX ACLs Mount options ============= @@ -79,3 +78,5 @@ inode64 Indicates that Ocfs2 is allowed to create inodes at bits of significance. user_xattr (*) Enables Extended User Attributes. nouser_xattr Disables Extended User Attributes. +acl Enables POSIX Access Control Lists support. +noacl (*) Disables POSIX Access Control Lists support. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 71df353e367c..d105eb45282a 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -140,6 +140,7 @@ Table 1-1: Process specific entries in /proc statm Process memory status information status Process status in human readable form wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan + stack Report full stack trace, enable via CONFIG_STACKTRACE smaps Extension based on maps, the rss size for each mapped file .............................................................................. @@ -1385,6 +1386,15 @@ swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100 causes the kernel to prefer to reclaim dentries and inodes. +dirty_background_bytes +---------------------- + +Contains the amount of dirty memory at which the pdflush background writeback +daemon will start writeback. + +If dirty_background_bytes is written, dirty_background_ratio becomes a function +of its value (dirty_background_bytes / the amount of dirtyable system memory). + dirty_background_ratio ---------------------- @@ -1393,14 +1403,29 @@ pages + file cache, not including locked pages and HugePages), the number of pages at which the pdflush background writeback daemon will start writing out dirty data. +If dirty_background_ratio is written, dirty_background_bytes becomes a function +of its value (dirty_background_ratio * the amount of dirtyable system memory). + +dirty_bytes +----------- + +Contains the amount of dirty memory at which a process generating disk writes +will itself start writeback. + +If dirty_bytes is written, dirty_ratio becomes a function of its value +(dirty_bytes / the amount of dirtyable system memory). + dirty_ratio ------------------ +----------- Contains, as a percentage of the dirtyable system memory (free pages + mapped pages + file cache, not including locked pages and HugePages), the number of pages at which a process which is generating disk writes will itself start writing out dirty data. +If dirty_ratio is written, dirty_bytes becomes a function of its value +(dirty_ratio * the amount of dirtyable system memory). + dirty_writeback_centisecs ------------------------- diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt index dd84ea3c10da..84da2a4ba25a 100644 --- a/Documentation/filesystems/ubifs.txt +++ b/Documentation/filesystems/ubifs.txt @@ -95,6 +95,9 @@ no_chk_data_crc skip checking of CRCs on data nodes in order to of this option is that corruption of the contents of a file can go unnoticed. chk_data_crc (*) do not skip checking CRCs on data nodes +compr=none override default compressor and set it to "none" +compr=lzo override default compressor and set it to "lzo" +compr=zlib override default compressor and set it to "zlib" Quick usage instructions diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index aef5a9b36846..4d184f2db0ea 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -74,7 +74,7 @@ a sensor. Notice that some banks have both a read and a write address this is how the uGuru determines if a read from or a write to the bank is taking place, thus when reading you should always use the read address and when writing the -write address. The write address is always one (1) more then the read address. +write address. The write address is always one (1) more than the read address. uGuru ready @@ -224,7 +224,7 @@ Bit 3: Beep if alarm (RW) Bit 4: 1 if alarm cause measured temp is over the warning threshold (R) Bit 5: 1 if alarm cause measured volt is over the max threshold (R) Bit 6: 1 if alarm cause measured volt is under the min threshold (R) -Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds (RW) +Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW) Temp sensor: Shutdown if temp is over the shutdown threshold (RW) * This bit is only honored/used by the uGuru if a temp sensor is connected @@ -293,7 +293,7 @@ Byte 0: Alarm behaviour for the selected sensor. A 1 enables the described behaviour. Bit 0: Give an alarm if measured rpm is under the min threshold (RW) Bit 3: Beep if alarm (RW) -Bit 7: Shutdown if alarm persist for more then 4 seconds (RW) +Bit 7: Shutdown if alarm persist for more than 4 seconds (RW) Byte 1: min threshold (scale as bank 0x26) diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470 index 75d13ca147cc..8ce4aa0a0f55 100644 --- a/Documentation/hwmon/adt7470 +++ b/Documentation/hwmon/adt7470 @@ -31,15 +31,11 @@ Each of the measured inputs (temperature, fan speed) has corresponding high/low limit values. The ADT7470 will signal an ALARM if any measured value exceeds either limit. -The ADT7470 DOES NOT sample all inputs continuously. A single pin on the -ADT7470 is connected to a multitude of thermal diodes, but the chip must be -instructed explicitly to read the multitude of diodes. If you want to use -automatic fan control mode, you must manually read any of the temperature -sensors or the fan control algorithm will not run. The chip WILL NOT DO THIS -AUTOMATICALLY; this must be done from userspace. This may be a bug in the chip -design, given that many other AD chips take care of this. The driver will not -read the registers more often than once every 5 seconds. Further, -configuration data is only read once per minute. +The ADT7470 samples all inputs continuously. A kernel thread is started up for +the purpose of periodically querying the temperature sensors, thus allowing the +automatic fan pwm control to set the fan speed. The driver will not read the +registers more often than once every 5 seconds. Further, configuration data is +only read once per minute. Special Features ---------------- @@ -72,5 +68,6 @@ pwm#_auto_point2_temp. Notes ----- -As stated above, the temperature inputs must be read periodically from -userspace in order for the automatic pwm algorithm to run. +The temperature inputs no longer need to be read periodically from userspace in +order for the automatic pwm algorithm to run. This was the case for earlier +versions of the driver. diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg new file mode 100644 index 000000000000..a8321267b5b6 --- /dev/null +++ b/Documentation/hwmon/f71882fg @@ -0,0 +1,89 @@ +Kernel driver f71882fg +====================== + +Supported chips: + * Fintek F71882FG and F71883FG + Prefix: 'f71882fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71862FG and F71863FG + Prefix: 'f71862fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F8000 + Prefix: 'f8000' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + +Author: Hans de Goede <hdegoede@redhat.com> + + +Description +----------- + +Fintek F718xxFG/F8000 Super I/O chips include complete hardware monitoring +capabilities. They can monitor up to 9 voltages (3 for the F8000), 4 fans and +3 temperature sensors. + +These chips also have fan controlling features, using either DC or PWM, in +three different modes (one manual, two automatic). + +The driver assumes that no more than one chip is present, which seems +reasonable. + + +Monitoring +---------- + +The Voltage, Fan and Temperature Monitoring uses the standard sysfs +interface as documented in sysfs-interface, without any exceptions. + + +Fan Control +----------- + +Both PWM (pulse-width modulation) and DC fan speed control methods are +supported. The right one to use depends on external circuitry on the +motherboard, so the driver assumes that the BIOS set the method +properly. + +There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC +voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM +mode where the actual RPM of the fan (as measured) is controlled and the speed +gets specified as 0-100% of the fan#_full_speed file. + +Since both modes work in a 0-100% (mapped to 0-255) scale, there isn't a +whole lot of a difference when modifying fan control settings. The only +important difference is that in RPM mode the 0-100% controls the fan speed +between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs +RPM mode, it will also set fan#_full_speed properly, if it does not then +fan control will not work properly, unless you set a sane fan#_full_speed +value yourself. + +Switching between these modes requires re-initializing a whole bunch of +registers, so the mode which the BIOS has set is kept. The mode is +printed when loading the driver. + +Three different fan control modes are supported; the mode number is written +to the pwm#_enable file. Note that not all modes are supported on all +chips, and some modes may only be available in RPM / PWM mode on the F8000. +Writing an unsupported mode will result in an invalid parameter error. + +* 1: Manual mode + You ask for a specific PWM duty cycle / DC voltage or a specific % of + fan#_full_speed by writing to the pwm# file. This mode is only + available on the F8000 if the fan channel is in RPM mode. + +* 2: Normal auto mode + You can define a number of temperature/fan speed trip points, which % the + fan should run at at this temp and which temp a fan should follow using the + standard sysfs interface. The number and type of trip points is chip + depended, see which files are available in sysfs. + Fan/PWM channel 3 of the F8000 is always in this mode! + +* 3: Thermostat mode (Only available on the F8000 when in duty cycle mode) + The fan speed is regulated to keep the temp the fan is mapped to between + temp#_auto_point2_temp and temp#_auto_point3_temp. + +Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to +fan2 and pwm3 to fan3. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 042c0415140b..659315d98e00 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -26,6 +26,10 @@ Supported chips: Datasheet: Publicly available at the ITE website http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip + * IT8720F + Prefix: 'it8720' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not yet publicly available. * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -71,7 +75,7 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8726F and SiS950 chips. +IT8718F, IT8720F, IT8726F and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -84,19 +88,19 @@ the IT8716F and late IT8712F have 6. They are shared with other functions though, so the functionality may not be available on a given system. The driver dumbly assume it is there. -The IT8718F also features VID inputs (up to 8 pins) but the value is -stored in the Super-I/O configuration space. Due to technical limitations, +The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value +is stored in the Super-I/O configuration space. Due to technical limitations, this value can currently only be read once at initialization time, so the driver won't notice and report changes in the VID value. The two upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. -The IT8716F, IT8718F and later IT8712F revisions have support for +The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional -16-bit tachometer counters for fans 1 to 3. This is better (no more fan -clock divider mess) but not compatible with the older chips and +The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have +optional 16-bit tachometer counters for fans 1 to 3. This is better (no more +fan clock divider mess) but not compatible with the older chips and revisions. The 16-bit tachometer mode is enabled by the driver when one of the above chips is detected. @@ -122,7 +126,7 @@ zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt. The battery voltage in8 does not have limit registers. -The VID lines (IT8712F/IT8716F/IT8718F) encode the core voltage value: +The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by the mainboard and/or processor itself. It is a value in volts. diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70 index 2bdd3feebf53..0d240291e3cc 100644 --- a/Documentation/hwmon/lm70 +++ b/Documentation/hwmon/lm70 @@ -1,9 +1,11 @@ Kernel driver lm70 ================== -Supported chip: +Supported chips: * National Semiconductor LM70 Datasheet: http://www.national.com/pf/LM/LM70.html + * Texas Instruments TMP121/TMP123 + Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html Author: Kaiwan N Billimoria <kaiwan@designergraphix.com> @@ -25,6 +27,14 @@ complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. +As a real (in-tree) example of this "SPI protocol driver" interfacing +with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c +and its associated documentation. + +The TMP121/TMP123 are very similar; main differences are 4 wire SPI inter- +face (read only) and 13-bit temperature data (0.0625 degrees celsius reso- +lution). + Thanks to --------- Jean Delvare <khali@linux-fr.org> for mentoring the hwmon-side driver diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 400620741290..a13680871bc7 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -164,7 +164,7 @@ configured individually according to the following options. temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the bahaviour of fans. Write 1 to let fans spinning at + the behaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245 new file mode 100644 index 000000000000..bae7a3adc5d8 --- /dev/null +++ b/Documentation/hwmon/ltc4245 @@ -0,0 +1,81 @@ +Kernel driver ltc4245 +===================== + +Supported chips: + * Linear Technology LTC4245 + Prefix: 'ltc4245' + Addresses scanned: 0x20-0x3f + Datasheet: + http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + +Author: Ira W. Snyder <iws@ovro.caltech.edu> + + +Description +----------- + +The LTC4245 controller allows a board to be safely inserted and removed +from a live backplane in multiple supply systems such as CompactPCI and +PCI Express. + + +Usage Notes +----------- + +This driver does not probe for LTC4245 devices, due to the fact that some +of the possible addresses are unfriendly to probing. You will need to use +the "force" parameter to tell the driver where to find the device. + +Example: the following will load the driver for an LTC4245 at address 0x23 +on I2C bus #1: +$ modprobe ltc4245 force=1,0x23 + + +Sysfs entries +------------- + +The LTC4245 has built-in limits for over and under current warnings. This +makes it very likely that the reference circuit will be used. + +This driver uses the values in the datasheet to change the register values +into the values specified in the sysfs-interface document. The current readings +rely on the sense resistors listed in Table 2: "Sense Resistor Values". + +in1_input 12v input voltage (mV) +in2_input 5v input voltage (mV) +in3_input 3v input voltage (mV) +in4_input Vee (-12v) input voltage (mV) + +in1_min_alarm 12v input undervoltage alarm +in2_min_alarm 5v input undervoltage alarm +in3_min_alarm 3v input undervoltage alarm +in4_min_alarm Vee (-12v) input undervoltage alarm + +curr1_input 12v current (mA) +curr2_input 5v current (mA) +curr3_input 3v current (mA) +curr4_input Vee (-12v) current (mA) + +curr1_max_alarm 12v overcurrent alarm +curr2_max_alarm 5v overcurrent alarm +curr3_max_alarm 3v overcurrent alarm +curr4_max_alarm Vee (-12v) overcurrent alarm + +in5_input 12v output voltage (mV) +in6_input 5v output voltage (mV) +in7_input 3v output voltage (mV) +in8_input Vee (-12v) output voltage (mV) + +in5_min_alarm 12v output undervoltage alarm +in6_min_alarm 5v output undervoltage alarm +in7_min_alarm 3v output undervoltage alarm +in8_min_alarm Vee (-12v) output undervoltage alarm + +in9_input GPIO #1 voltage data +in10_input GPIO #2 voltage data +in11_input GPIO #3 voltage data + +power1_input 12v power usage (mW) +power2_input 5v power usage (mW) +power3_input 3v power usage (mW) +power4_input Vee (-12v) power usage (mW) diff --git a/Documentation/ide/warm-plug-howto.txt b/Documentation/ide/warm-plug-howto.txt index d5885468b072..98152bcd515a 100644 --- a/Documentation/ide/warm-plug-howto.txt +++ b/Documentation/ide/warm-plug-howto.txt @@ -11,3 +11,8 @@ unplug old device(s) and plug new device(s) # echo -n "1" > /sys/class/ide_port/idex/scan done + +NOTE: please make sure that partitions are unmounted and that there are +no other active references to devices before doing "delete_devices" step, +also do not attempt "scan" step on devices currently in use -- otherwise +results may be unpredictable and lead to data loss if you're unlucky diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt new file mode 100644 index 000000000000..8f4289efc5c4 --- /dev/null +++ b/Documentation/input/walkera0701.txt @@ -0,0 +1,109 @@ + +Walkera WK-0701 transmitter is supplied with a ready to fly Walkera +helicopters such as HM36, HM37, HM60. The walkera0701 module enables to use +this transmitter as joystick + +Devel homepage and download: +http://zub.fei.tuke.sk/walkera-wk0701/ + +or use cogito: +cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick + + +Connecting to PC: + +At back side of transmitter S-video connector can be found. Modulation +pulses from processor to HF part can be found at pin 2 of this connector, +pin 3 is GND. Between pin 3 and CPU 5k6 resistor can be found. To get +modulation pulses to PC, signal pulses must be amplified. + +Cable: (walkera TX to parport) + +Walkera WK-0701 TX S-VIDEO connector: + (back side of TX) + __ __ S-video: canon25 + / |_| \ pin 2 (signal) NPN parport + / O 4 3 O \ pin 3 (GND) LED ________________ 10 ACK + ( O 2 1 O ) | C + \ ___ / 2 ________________________|\|_____|/ + | [___] | |/| B |\ + ------- 3 __________________________________|________________ 25 GND + E + + +I use green LED and BC109 NPN transistor. + +Software: + +Build kernel with walkera0701 module. Module walkera0701 need exclusive +access to parport, modules like lp must be unloaded before loading +walkera0701 module, check dmesg for error messages. Connect TX to PC by +cable and run jstest /dev/input/js0 to see values from TX. If no value can +be changed by TX "joystick", check output from /proc/interrupts. Value for +(usually irq7) parport must increase if TX is on. + + + +Technical details: + +Driver use interrupt from parport ACK input bit to measure pulse length +using hrtimers. + +Frame format: +Based on walkera WK-0701 PCM Format description by Shaul Eizikovich. +(downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf) + +Signal pulses: + (ANALOG) + SYNC BIN OCT + +---------+ +------+ + | | | | +--+ +------+ +--- + +Frame: + SYNC , BIN1, OCT1, BIN2, OCT2 ... BIN24, OCT24, BIN25, next frame SYNC .. + +pulse length: + Binary values: Analog octal values: + + 288 uS Binary 0 318 uS 000 + 438 uS Binary 1 398 uS 001 + 478 uS 010 + 558 uS 011 + 638 uS 100 + 1306 uS SYNC 718 uS 101 + 798 uS 110 + 878 uS 111 + +24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits + +(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync +to bin change or octal value to bin change). + +Binary data representations: + +One binary and octal value can be grouped to nibble. 24 nibbles + one binary +values can be sampled between sync pulses. + +Values for first four channels (analog joystick values) can be found in +first 10 nibbles. Analog value is represented by one sign bit and 9 bit +absolute binary value. (10 bits per channel). Next nibble is checksum for +first ten nibbles. + +Next nibbles 12 .. 21 represents four channels (not all channels can be +directly controlled from TX). Binary representations ar the same as in first +four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is +checksum for nibbles 12..23. + +After last octal value for nibble 24 and next sync pulse one additional +binary value can be sampled. This bit and magic number is not used in +software driver. Some details about this magic numbers can be found in +Walkera_Wk-0701_PCM.pdf. + +Checksum calculation: + +Summary of octal values in nibbles must be same as octal value in checksum +nibble (only first 3 bits are used). Binary value for checksum nibble is +calculated by sum of binary values in checked nibbles + sum of octal values +in checked nibbles divided by 8. Only bit 0 of this sum is used. + diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index b880ce5dbd33..f1d639903325 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -84,7 +84,7 @@ Code Seq# Include File Comments 'B' C0-FF advanced bbus <mailto:maassen@uni-freiburg.de> 'C' all linux/soundcard.h -'D' all asm-s390/dasd.h +'D' all arch/s390/include/asm/dasd.h 'E' all linux/input.h 'F' all linux/fb.h 'H' all linux/hiddev.h @@ -97,6 +97,7 @@ Code Seq# Include File Comments <http://linux01.gwdg.de/~alatham/ppdd.html> 'M' all linux/soundcard.h 'N' 00-1F drivers/usb/scanner.h +'O' 00-02 include/mtd/ubi-user.h UBI 'P' all linux/soundcard.h 'Q' all linux/soundcard.h 'R' 00-1F linux/random.h @@ -104,7 +105,7 @@ Code Seq# Include File Comments 'S' 80-81 scsi/scsi_ioctl.h conflict! 'S' 82-FF scsi/scsi.h conflict! 'T' all linux/soundcard.h conflict! -'T' all asm-i386/ioctls.h conflict! +'T' all arch/x86/include/asm/ioctls.h conflict! 'U' 00-EF linux/drivers/usb/usb.h 'V' all linux/vt.h 'W' 00-1F linux/watchdog.h conflict! @@ -119,7 +120,7 @@ Code Seq# Include File Comments <mailto:natalia@nikhefk.nikhef.nl> 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! -'c' 80-9F asm-s390/chsc.h +'c' 80-9F arch/s390/include/asm/chsc.h 'd' 00-FF linux/char/drm/drm/h conflict! 'd' 00-DF linux/video_decoder.h conflict! 'd' F0-FF linux/digi1.h @@ -142,6 +143,9 @@ Code Seq# Include File Comments 'n' 00-7F linux/ncp_fs.h 'n' E0-FF video/matrox.h matroxfb 'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 +'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps) +'o' 40-41 include/mtd/ubi-user.h UBI +'o' 01-A1 include/linux/dvb/*.h DVB 'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) 'p' 00-3F linux/mc146818rtc.h conflict! 'p' 40-7F linux/nvram.h @@ -166,7 +170,7 @@ Code Seq# Include File Comments <mailto:oe@port.de> 0x80 00-1F linux/fb.h 0x81 00-1F linux/videotext.h -0x89 00-06 asm-i386/sockios.h +0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range 0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range diff --git a/Documentation/kbuild/00-INDEX b/Documentation/kbuild/00-INDEX index 114644285454..e8d2b6d83a3d 100644 --- a/Documentation/kbuild/00-INDEX +++ b/Documentation/kbuild/00-INDEX @@ -1,5 +1,9 @@ 00-INDEX - - this file: info on the kernel build process + - this file: info on the kernel build process +kbuild.txt + - developer information on kbuild +kconfig.txt + - usage help for make *config kconfig-language.txt - specification of Config Language, the language in Kconfig files makefiles.txt diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt new file mode 100644 index 000000000000..923f9ddee8f6 --- /dev/null +++ b/Documentation/kbuild/kbuild.txt @@ -0,0 +1,133 @@ +Environment variables + +KCPPFLAGS +-------------------------------------------------- +Additional options to pass when preprocessing. The preprocessing options +will be used in all cases where kbuild do preprocessing including +building C files and assembler files. + +KAFLAGS +-------------------------------------------------- +Additional options to the assembler. + +KCFLAGS +-------------------------------------------------- +Additional options to the C compiler. + +KBUILD_VERBOSE +-------------------------------------------------- +Set the kbuild verbosity. Can be assinged same values as "V=...". +See make help for the full list. +Setting "V=..." takes precedence over KBUILD_VERBOSE. + +KBUILD_EXTMOD +-------------------------------------------------- +Set the directory to look for the kernel source when building external +modules. +The directory can be specified in several ways: +1) Use "M=..." on the command line +2) Environmnet variable KBUILD_EXTMOD +3) Environmnet variable SUBDIRS +The possibilities are listed in the order they take precedence. +Using "M=..." will always override the others. + +KBUILD_OUTPUT +-------------------------------------------------- +Specify the output directory when building the kernel. +The output directory can also be specificed using "O=...". +Setting "O=..." takes precedence over KBUILD_OUTPUT + +ARCH +-------------------------------------------------- +Set ARCH to the architecture to be built. +In most cases the name of the architecture is the same as the +directory name found in the arch/ directory. +But some architectures suach as x86 and sparc has aliases. +x86: i386 for 32 bit, x86_64 for 64 bit +sparc: sparc for 32 bit, sparc64 for 64 bit + +CROSS_COMPILE +-------------------------------------------------- +Specify an optional fixed part of the binutils filename. +CROSS_COMPILE can be a part of the filename or the full path. + +CROSS_COMPILE is also used for ccache is some setups. + +CF +-------------------------------------------------- +Additional options for sparse. +CF is often used on the command-line like this: + + make CF=-Wbitwise C=2 + +INSTALL_PATH +-------------------------------------------------- +INSTALL_PATH specifies where to place the updated kernel and system map +images. Default is /boot, but you can set it to other values + + +MODLIB +-------------------------------------------------- +Specify where to install modules. +The default value is: + + $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) + +The value can be overridden in which case the default value is ignored. + +INSTALL_MOD_PATH +-------------------------------------------------- +INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory +relocations required by build roots. This is not defined in the +makefile but the argument can be passed to make if needed. + +INSTALL_MOD_STRIP +-------------------------------------------------- +INSTALL_MOD_STRIP, if defined, will cause modules to be +stripped after they are installed. If INSTALL_MOD_STRIP is '1', then +the default option --strip-debug will be used. Otherwise, +INSTALL_MOD_STRIP will used as the options to the strip command. + +INSTALL_FW_PATH +-------------------------------------------------- +INSTALL_FW_PATH specify where to install the firmware blobs. +The default value is: + + $(INSTALL_MOD_PATH)/lib/firmware + +The value can be overridden in which case the default value is ignored. + +INSTALL_HDR_PATH +-------------------------------------------------- +INSTALL_HDR_PATH specify where to install user space headers when +executing "make headers_*". +The default value is: + + $(objtree)/usr + +$(objtree) is the directory where output files are saved. +The output directory is often set using "O=..." on the commandline. + +The value can be overridden in which case the default value is ignored. + +KBUILD_MODPOST_WARN +-------------------------------------------------- +KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined +symbols in the final module linking stage. + +KBUILD_MODPOST_FINAL +-------------------------------------------------- +KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. +This is solely usefull to speed up test compiles. + +KBUILD_EXTRA_SYMBOLS +-------------------------------------------------- +For modules use symbols from another modules. +See more details in modules.txt. + +ALLSOURCE_ARCHS +-------------------------------------------------- +For tags/TAGS/cscope targets, you can specify more than one archs +to be included in the databases, separated by blankspace. e.g. + + $ make ALLSOURCE_ARCHS="x86 mips arm" tags diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt new file mode 100644 index 000000000000..26a7c0a93193 --- /dev/null +++ b/Documentation/kbuild/kconfig.txt @@ -0,0 +1,188 @@ +This file contains some assistance for using "make *config". + +Use "make help" to list all of the possible configuration targets. + +The xconfig ('qconf') and menuconfig ('mconf') programs also +have embedded help text. Be sure to check it for navigation, +search, and other general help text. + +====================================================================== +General +-------------------------------------------------- + +New kernel releases often introduce new config symbols. Often more +important, new kernel releases may rename config symbols. When +this happens, using a previously working .config file and running +"make oldconfig" won't necessarily produce a working new kernel +for you, so you may find that you need to see what NEW kernel +symbols have been introduced. + +To see a list of new config symbols when using "make oldconfig", use + + cp user/some/old.config .config + yes "" | make oldconfig >conf.new + +and the config program will list as (NEW) any new symbols that have +unknown values. Of course, the .config file is also updated with +new (default) values, so you can use: + + grep "(NEW)" conf.new + +to see the new config symbols or you can 'diff' the previous and +new .config files to see the differences: + + diff .config.old .config | less + +(Yes, we need something better here.) + + +====================================================================== +menuconfig +-------------------------------------------------- + +SEARCHING for CONFIG symbols + +Searching in menuconfig: + + The Search function searches for kernel configuration symbol + names, so you have to know something close to what you are + looking for. + + Example: + /hotplug + This lists all config symbols that contain "hotplug", + e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG. + + For search help, enter / followed TAB-TAB-TAB (to highlight + <Help>) and Enter. This will tell you that you can also use + regular expressions (regexes) in the search string, so if you + are not interested in MEMORY_HOTPLUG, you could try + + /^hotplug + + +______________________________________________________________________ +Color Themes for 'menuconfig' + +It is possible to select different color themes using the variable +MENUCONFIG_COLOR. To select a theme use: + + make MENUCONFIG_COLOR=<theme> menuconfig + +Available themes are: + mono => selects colors suitable for monochrome displays + blackbg => selects a color scheme with black background + classic => theme with blue background. The classic look + bluetitle => a LCD friendly version of classic. (default) + +______________________________________________________________________ +Environment variables in 'menuconfig' + +KCONFIG_ALLCONFIG +-------------------------------------------------- +(partially based on lkml email from/by Rob Landley, re: miniconfig) +-------------------------------------------------- +The allyesconfig/allmodconfig/allnoconfig/randconfig variants can +also use the environment variable KCONFIG_ALLCONFIG as a flag or a +filename that contains config symbols that the user requires to be +set to a specific value. If KCONFIG_ALLCONFIG is used without a +filename, "make *config" checks for a file named +"all{yes/mod/no/random}.config" (corresponding to the *config command +that was used) for symbol values that are to be forced. If this file +is not found, it checks for a file named "all.config" to contain forced +values. + +This enables you to create "miniature" config (miniconfig) or custom +config files containing just the config symbols that you are interested +in. Then the kernel config system generates the full .config file, +including dependencies of your miniconfig file, based on the miniconfig +file. + +This 'KCONFIG_ALLCONFIG' file is a config file which contains +(usually a subset of all) preset config symbols. These variable +settings are still subject to normal dependency checks. + +Examples: + KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig +or + KCONFIG_ALLCONFIG=mini.config make allnoconfig +or + make KCONFIG_ALLCONFIG=mini.config allnoconfig + +These examples will disable most options (allnoconfig) but enable or +disable the options that are explicitly listed in the specified +mini-config files. + +KCONFIG_NOSILENTUPDATE +-------------------------------------------------- +If this variable has a non-blank value, it prevents silent kernel +config udpates (requires explicit updates). + +KCONFIG_CONFIG +-------------------------------------------------- +This environment variable can be used to specify a default kernel config +file name to override the default name of ".config". + +KCONFIG_OVERWRITECONFIG +-------------------------------------------------- +If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not +break symlinks when .config is a symlink to somewhere else. + +KCONFIG_NOTIMESTAMP +-------------------------------------------------- +If this environment variable exists and is non-null, the timestamp line +in generated .config files is omitted. + +KCONFIG_AUTOCONFIG +-------------------------------------------------- +This environment variable can be set to specify the path & name of the +"auto.conf" file. Its default value is "include/config/auto.conf". + +KCONFIG_AUTOHEADER +-------------------------------------------------- +This environment variable can be set to specify the path & name of the +"autoconf.h" (header) file. Its default value is "include/linux/autoconf.h". + +______________________________________________________________________ +menuconfig User Interface Options +---------------------------------------------------------------------- +MENUCONFIG_MODE +-------------------------------------------------- +This mode shows all sub-menus in one large tree. + +Example: + MENUCONFIG_MODE=single_menu make menuconfig + +====================================================================== +xconfig +-------------------------------------------------- + +Searching in xconfig: + + The Search function searches for kernel configuration symbol + names, so you have to know something close to what you are + looking for. + + Example: + Ctrl-F hotplug + or + Menu: File, Search, hotplug + + lists all config symbol entries that contain "hotplug" in + the symbol name. In this Search dialog, you may change the + config setting for any of the entries that are not grayed out. + You can also enter a different search string without having + to return to the main menu. + + +====================================================================== +gconfig +-------------------------------------------------- + +Searching in gconfig: + + None (gconfig isn't maintained as well as xconfig or menuconfig); + however, gconfig does have a few more viewing choices than + xconfig does. + +### diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt index 1821c077b435..b1096da953c8 100644 --- a/Documentation/kbuild/modules.txt +++ b/Documentation/kbuild/modules.txt @@ -253,7 +253,7 @@ following files: # Module specific targets genbin: - echo "X" > 8123_bin_shipped + echo "X" > 8123_bin.o_shipped In example 2, we are down to two fairly simple files and for simple @@ -279,7 +279,7 @@ following files: # Module specific targets genbin: - echo "X" > 8123_bin_shipped + echo "X" > 8123_bin.o_shipped endif diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index c6841eee9598..d73fbd2b2b45 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -71,6 +71,11 @@ The @argument descriptions must begin on the very next line following this opening short function description line, with no intervening empty comment lines. +If a function parameter is "..." (varargs), it should be listed in +kernel-doc notation as: + * @...: description + + Example kernel-doc data structure comment. /** @@ -282,6 +287,32 @@ struct my_struct { }; +Including documentation blocks in source files +---------------------------------------------- + +To facilitate having source code and comments close together, you can +include kernel-doc documentation blocks that are free-form comments +instead of being kernel-doc for functions, structures, unions, +enums, or typedefs. This could be used for something like a +theory of operation for a driver or library code, for example. + +This is done by using a DOC: section keyword with a section title. E.g.: + +/** + * DOC: Theory of Operation + * + * The whizbang foobar is a dilly of a gizmo. It can do whatever you + * want it to do, at any time. It reads your mind. Here's how it works. + * + * foo bar splat + * + * The only drawback to this gizmo is that is can sometimes damage + * hardware, software, or its subject(s). + */ + +DOC: sections are used in SGML templates files as indicated below. + + How to make new SGML template files ----------------------------------- @@ -302,6 +333,9 @@ exported using EXPORT_SYMBOL. !F<filename> <function [functions...]> is replaced by the documentation, in <filename>, for the functions listed. +!P<filename> <section title> is replaced by the contents of the DOC: +section titled <section title> from <filename>. +Spaces are allowed in <section title>; do not quote the <section title>. Tim. */ <twaugh@redhat.com> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a2d8805c03d5..532eacbbed62 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -91,6 +91,7 @@ parameter is applicable: SUSPEND System suspend states are enabled. FTRACE Function tracing enabled. TS Appropriate touchscreen support is enabled. + UMS USB Mass Storage support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. V4L Video For Linux support is enabled. @@ -469,8 +470,8 @@ and is between 256 and 4096 characters. It is defined in the file clearcpuid=BITNUM [X86] Disable CPUID feature X for the kernel. See - include/asm-x86/cpufeature.h for the valid bit numbers. - Note the Linux specific bits are not necessarily + arch/x86/include/asm/cpufeature.h for the valid bit + numbers. Note the Linux specific bits are not necessarily stable over kernel options, but the vendor specific ones should be. Also note that user programs calling CPUID directly @@ -551,6 +552,11 @@ and is between 256 and 4096 characters. It is defined in the file not work reliably with all consoles, but is known to work with serial and VGA consoles. + coredump_filter= + [KNL] Change the default value for + /proc/<pid>/coredump_filter. + See also Documentation/filesystems/proc.txt. + cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] @@ -913,6 +919,10 @@ and is between 256 and 4096 characters. It is defined in the file inttest= [IA64] + iomem= Disable strict checking of access to MMIO memory + strict regions from userspace. + relaxed + iommu= [x86] off force @@ -1117,6 +1127,8 @@ and is between 256 and 4096 characters. It is defined in the file If there are multiple matching configurations changing the same attribute, the last one is used. + lmb=debug [KNL] Enable lmb debug messages. + load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/blockdev/ramdisk.txt. @@ -1569,6 +1581,10 @@ and is between 256 and 4096 characters. It is defined in the file nr_uarts= [SERIAL] maximum number of UARTs to be registered. + ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. + See Documentation/debugging-via-ohci1394.txt for more + info. + olpc_ec_timeout= [OLPC] ms delay when issuing EC commands Rather than timing out after 20 ms if an EC command is not properly ACKed, override the length @@ -1793,10 +1809,10 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). - dynamic_printk - Enables pr_debug()/dev_dbg() calls if - CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. These can also - be switched on/off via <debugfs>/dynamic_printk/modules + dynamic_printk Enables pr_debug()/dev_dbg() calls if + CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. + These can also be switched on/off via + <debugfs>/dynamic_printk/modules print-fatal-signals= [KNL] debug: print fatal signals @@ -1884,7 +1900,7 @@ and is between 256 and 4096 characters. It is defined in the file reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: <reboot_mode>[,<reboot_mode2>[,...]] - See arch/*/kernel/reboot.c or arch/*/kernel/process.c + See arch/*/kernel/reboot.c or arch/*/kernel/process.c relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. @@ -2372,6 +2388,41 @@ and is between 256 and 4096 characters. It is defined in the file usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. + usb-storage.delay_use= + [UMS] The delay in seconds before a new device is + scanned for Logical Units (default 5). + + usb-storage.quirks= + [UMS] A list of quirks entries to supplement or + override the built-in unusual_devs list. List + entries are separated by commas. Each entry has + the form VID:PID:Flags where VID and PID are Vendor + and Product ID values (4-digit hex numbers) and + Flags is a set of characters, each corresponding + to a common usb-storage quirk flag as follows: + a = SANE_SENSE (collect more than 18 bytes + of sense data); + c = FIX_CAPACITY (decrease the reported + device capacity by one sector); + h = CAPACITY_HEURISTICS (decrease the + reported device capacity by one + sector if the number is odd); + i = IGNORE_DEVICE (don't bind to this + device); + l = NOT_LOCKABLE (don't try to lock and + unlock ejectable media); + m = MAX_SECTORS_64 (don't transfer more + than 64 sectors = 32 KB at a time); + o = CAPACITY_OK (accept the capacity + reported by the device); + r = IGNORE_RESIDUE (the device reports + bogus residue values); + s = SINGLE_LUN (the device has only one + Logical Unit); + w = NO_WP_DETECT (don't test whether the + medium is write-protected). + Example: quirks=0419:aaf5:rl,0421:0433:rc + add_efi_memmap [EFI; x86-32,X86-64] Include EFI memory map in kernel's map of available physical RAM. @@ -2432,8 +2483,8 @@ and is between 256 and 4096 characters. It is defined in the file Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] - norandmaps Don't use address space randomization - Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space + norandmaps Don't use address space randomization. Equivalent to + echo 0 > /proc/sys/kernel/randomize_va_space ______________________________________________________________________ diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index f5d2aad65a67..b2e374586bd8 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -118,8 +118,8 @@ the name of the kobject, call kobject_rename(): int kobject_rename(struct kobject *kobj, const char *new_name); -Note kobject_rename does perform any locking or have a solid notion of -what names are valid so the provide must provide their own sanity checking +kobject_rename does not perform any locking or have a solid notion of +what names are valid so the caller must provide their own sanity checking and serialization. There is a function called kobject_set_name() but that is legacy cruft and diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index a79633d702bf..48b3de90eb1e 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -497,7 +497,10 @@ The first column provides the kernel address where the probe is inserted. The second column identifies the type of probe (k - kprobe, r - kretprobe and j - jprobe), while the third column specifies the symbol+offset of the probe. If the probed function belongs to a module, the module name -is also specified. +is also specified. Following columns show probe status. If the probe is on +a virtual address that is no longer valid (module init sections, module +virtual addresses that correspond to modules that've been unloaded), +such probes are marked with [GONE]. /debug/kprobes/enabled: Turn kprobes ON/OFF diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 71f0fe1fc1b0..898b4987bb80 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1475,7 +1475,7 @@ Sysfs interface changelog: 0x020100: Marker for thinkpad-acpi with hot key NVRAM polling support. If you must, use it to know you should not - start an userspace NVRAM poller (allows to detect when + start a userspace NVRAM poller (allows to detect when NVRAM is compiled out by the user because it is unneeded/undesired in the first place). 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt index 95070028d15e..505f19607542 100644 --- a/Documentation/magic-number.txt +++ b/Documentation/magic-number.txt @@ -125,14 +125,14 @@ TRIDENT_CARD_MAGIC 0x5072696E trident_card sound/oss/trident.c ROUTER_MAGIC 0x524d4157 wan_device include/linux/wanrouter.h SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c -GDA_MAGIC 0x58464552 gda include/asm-mips64/sn/gda.h +GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h RED_MAGIC1 0x5a2cf071 (any) mm/slab.c STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h -KV_MAGIC 0x5f4b565f kernel_vars_s include/asm-mips64/sn/klkernvars.h +KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c TRIDENT_STATE_MAGIC 0x63657373 trient_state sound/oss/trident.c M3_CARD_MAGIC 0x646e6f50 m3_card sound/oss/maestro3.c @@ -158,7 +158,7 @@ CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c QUEUE_MAGIC_USED 0xf7e1cc33 queue_entry drivers/scsi/arm/queue.c HTB_CMAGIC 0xFEFAFEF1 htb_class net/sched/sch_htb.c -NMI_MAGIC 0x48414d4d455201 nmi_s include/asm-mips64/sn/nmi.h +NMI_MAGIC 0x48414d4d455201 nmi_s arch/mips/include/asm/sn/nmi.h Note that there are also defined special per-driver magic numbers in sound memory management. See include/sound/sndmagic.h for complete list of them. Many diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 168117bd6ee8..4c2ecf537a4a 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -124,7 +124,7 @@ config options. This option can be kernel module too. -------------------------------- -3 sysfs files for memory hotplug +4 sysfs files for memory hotplug -------------------------------- All sections have their device information under /sys/devices/system/memory as @@ -138,11 +138,12 @@ For example, assume 1GiB section size. A device for a memory starting at (0x100000000 / 1Gib = 4) This device covers address range [0x100000000 ... 0x140000000) -Under each section, you can see 3 files. +Under each section, you can see 4 files. /sys/devices/system/memory/memoryXXX/phys_index /sys/devices/system/memory/memoryXXX/phys_device /sys/devices/system/memory/memoryXXX/state +/sys/devices/system/memory/memoryXXX/removable 'phys_index' : read-only and contains section id, same as XXX. 'state' : read-write @@ -150,10 +151,20 @@ Under each section, you can see 3 files. at write: user can specify "online", "offline" command 'phys_device': read-only: designed to show the name of physical memory device. This is not well implemented now. +'removable' : read-only: contains an integer value indicating + whether the memory section is removable or not + removable. A value of 1 indicates that the memory + section is removable and a value of 0 indicates that + it is not removable. NOTE: These directories/files appear after physical memory hotplug phase. +If CONFIG_NUMA is enabled the +/sys/devices/system/memory/memoryXXX memory section +directories can also be accessed via symbolic links located in +the /sys/devices/system/node/node* directories. For example: +/sys/devices/system/node/node0/memory9 -> ../../memory/memory9 -------------------------------- 4. Physical memory hot-add phase @@ -365,7 +376,6 @@ node if necessary. - allowing memory hot-add to ZONE_MOVABLE. maybe we need some switch like sysctl or new control file. - showing memory section and physical device relationship. - - showing memory section and node relationship (maybe good for NUMA) - showing memory section is under ZONE_MOVABLE or not - test and make it better memory offlining. - support HugeTLB page migration and offlining. diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index 25a6ed1aaa5b..f54962aea84d 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -44,7 +44,7 @@ FILES, CONFIGS AND COMPATABILITY Two files are introduced: - a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' + a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h' containes : struct _auide_hwif timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2 diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index c3669a3fb4af..60d05eb77c64 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -540,7 +540,7 @@ A client would issue an operation by: MSG_MORE should be set in msghdr::msg_flags on all but the last part of the request. Multiple requests may be made simultaneously. - If a call is intended to go to a destination other then the default + If a call is intended to go to a destination other than the default specified through connect(), then msghdr::msg_name should be set on the first request message of that call. diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt index 839cbb71388b..c0aab985bad9 100644 --- a/Documentation/networking/tuntap.txt +++ b/Documentation/networking/tuntap.txt @@ -118,7 +118,7 @@ As mentioned above, main purpose of TUN/TAP driver is tunneling. It is used by VTun (http://vtun.sourceforge.net). Another interesting application using TUN/TAP is pipsecd -(http://perso.enst.fr/~beyssac/pipsec/), an userspace IPSec +(http://perso.enst.fr/~beyssac/pipsec/), a userspace IPSec implementation that can use complete kernel routing (unlike FreeS/WAN). 3. How does Virtual network device actually work ? diff --git a/Documentation/powerpc/cpu_features.txt b/Documentation/powerpc/cpu_features.txt index 472739880e87..ffa4183fdb8b 100644 --- a/Documentation/powerpc/cpu_features.txt +++ b/Documentation/powerpc/cpu_features.txt @@ -31,7 +31,7 @@ anyways). After detecting the processor type, the kernel patches out sections of code that shouldn't be used by writing nop's over it. Using cpufeatures requires -just 2 macros (found in include/asm-ppc/cputable.h), as seen in head.S +just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S transfer_to_handler: #ifdef CONFIG_ALTIVEC diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index d30a281c570f..10711d9f0788 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -1402,7 +1402,7 @@ Syscalls are implemented on Linux for S390 by the Supervisor call instruction (S possibilities of these as the instruction is made up of a 0xA opcode & the second byte being the syscall number. They are traced using the simple command. TR SVC <Optional value or range> -the syscalls are defined in linux/include/asm-s390/unistd.h +the syscalls are defined in linux/arch/s390/include/asm/unistd.h e.g. to trace all file opens just do TR SVC 5 ( as this is the syscall number of open ) diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index c4b7b2bd369a..480a78ef5a1e 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -98,7 +98,7 @@ platform. Some of the interface routines are specific to Linux/390 and some of them can be found on other Linux platforms implementations too. Miscellaneous function prototypes, data declarations, and macro definitions can be found in the architecture specific C header file -linux/include/asm-s390/irq.h. +linux/arch/s390/include/asm/irq.h. Overview of CDS interface concepts diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt index e05420973698..2d10053dd97e 100644 --- a/Documentation/s390/s390dbf.txt +++ b/Documentation/s390/s390dbf.txt @@ -2,7 +2,7 @@ S390 Debug Feature ================== files: arch/s390/kernel/debug.c - include/asm-s390/debug.h + arch/s390/include/asm/debug.h Description: ------------ diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index ae3f962a7cfc..ff19a52fe004 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -733,7 +733,7 @@ Changes from 20040920 to 20041018 I/O completion path a little more, especially taking care of fast-pathing the non-error case. Also removes tons of dead members and defines from lpfc_scsi.h - e.g. lpfc_target is down - to nothing more then the lpfc_nodelist pointer. + to nothing more than the lpfc_nodelist pointer. * Added binary sysfs file to issue mbox commands * Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for compatibility with the user space applications. diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx index a9f721aeb11c..8b278c10edfd 100644 --- a/Documentation/scsi/ChangeLog.ncr53c8xx +++ b/Documentation/scsi/ChangeLog.ncr53c8xx @@ -19,7 +19,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr) Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr) * version ncr53c8xx-3.4.1 - - Provide OpenFirmare path through the proc FS on PPC. + - Provide OpenFirmware path through the proc FS on PPC. - Remove trailing argument #2 from a couple of #undefs. Sun Jul 09 16:30 2000 Gerard Roudier (groudier@club-internet.fr) diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx index ef985ec348e6..02ffbc1e8a84 100644 --- a/Documentation/scsi/ChangeLog.sym53c8xx +++ b/Documentation/scsi/ChangeLog.sym53c8xx @@ -81,7 +81,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr) Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr) * version sym53c8xx-1.7.1 - - Provide OpenFirmare path through the proc FS on PPC. + - Provide OpenFirmware path through the proc FS on PPC. - Download of on-chip SRAM using memcpy_toio() doesn't work on PPC. Restore previous method (MEMORY MOVE from SCRIPTS). - Remove trailing argument #2 from a couple of #undefs. diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp index 154bd02220b9..34a9cfd746bd 100644 --- a/Documentation/spi/spi-lm70llp +++ b/Documentation/spi/spi-lm70llp @@ -13,10 +13,20 @@ Description This driver provides glue code connecting a National Semiconductor LM70 LLP temperature sensor evaluation board to the kernel's SPI core subsystem. +This is a SPI master controller driver. It can be used in conjunction with +(layered under) the LM70 logical driver (a "SPI protocol driver"). In effect, this driver turns the parallel port interface on the eval board into a SPI bus with a single device, which will be driven by the generic LM70 driver (drivers/hwmon/lm70.c). + +Hardware Interfacing +-------------------- +The schematic for this particular board (the LM70EVAL-LLP) is +available (on page 4) here: + + http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + The hardware interfacing on the LM70 LLP eval board is as follows: Parallel LM70 LLP diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index d79eeda7a699..cd05994a49e6 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -41,7 +41,8 @@ Currently, these files are in /proc/sys/vm: ============================================================== -dirty_ratio, dirty_background_ratio, dirty_expire_centisecs, +dirty_bytes, dirty_ratio, dirty_background_bytes, +dirty_background_ratio, dirty_expire_centisecs, dirty_writeback_centisecs, highmem_is_dirtyable, vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout, drop-caches, hugepages_treat_as_movable: diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index e48ea1d51010..ad642615ad4c 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -313,11 +313,13 @@ three of the methods listed above. In addition, a driver indicates that it supports autosuspend by setting the .supports_autosuspend flag in its usb_driver structure. It is then responsible for informing the USB core whenever one of its interfaces becomes busy or idle. The -driver does so by calling these three functions: +driver does so by calling these five functions: int usb_autopm_get_interface(struct usb_interface *intf); void usb_autopm_put_interface(struct usb_interface *intf); int usb_autopm_set_interface(struct usb_interface *intf); + int usb_autopm_get_interface_async(struct usb_interface *intf); + void usb_autopm_put_interface_async(struct usb_interface *intf); The functions work by maintaining a counter in the usb_interface structure. When intf->pm_usage_count is > 0 then the interface is @@ -330,10 +332,12 @@ associated with the device itself rather than any of its interfaces. This field is used only by the USB core.) The driver owns intf->pm_usage_count; it can modify the value however -and whenever it likes. A nice aspect of the usb_autopm_* routines is -that the changes they make are protected by the usb_device structure's -PM mutex (udev->pm_mutex); however drivers may change pm_usage_count -without holding the mutex. +and whenever it likes. A nice aspect of the non-async usb_autopm_* +routines is that the changes they make are protected by the usb_device +structure's PM mutex (udev->pm_mutex); however drivers may change +pm_usage_count without holding the mutex. Drivers using the async +routines are responsible for their own synchronization and mutual +exclusion. usb_autopm_get_interface() increments pm_usage_count and attempts an autoresume if the new value is > 0 and the @@ -348,6 +352,14 @@ without holding the mutex. is suspended, and it attempts an autosuspend if the value is <= 0 and the device isn't suspended. + usb_autopm_get_interface_async() and + usb_autopm_put_interface_async() do almost the same things as + their non-async counterparts. The differences are: they do + not acquire the PM mutex, and they use a workqueue to do their + jobs. As a result they can be called in an atomic context, + such as an URB's completion handler, but when they return the + device will not generally not yet be in the desired state. + There also are a couple of utility routines drivers can use: usb_autopm_enable() sets pm_usage_cnt to 0 and then calls diff --git a/Documentation/usb/wusb-cbaf b/Documentation/usb/wusb-cbaf index 2e78b70f3adc..426ddaaef96f 100644 --- a/Documentation/usb/wusb-cbaf +++ b/Documentation/usb/wusb-cbaf @@ -80,12 +80,6 @@ case $1 in start) for dev in ${2:-$hdevs} do - uwb_rc=$(readlink -f $dev/uwb_rc) - if cat $uwb_rc/beacon | grep -q -- "-1" - then - echo 13 0 > $uwb_rc/beacon - echo I: started beaconing on ch 13 on $(basename $uwb_rc) >&2 - fi echo $host_CHID > $dev/wusb_chid echo I: started host $(basename $dev) >&2 done @@ -95,9 +89,6 @@ case $1 in do echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid echo I: stopped host $(basename $dev) >&2 - uwb_rc=$(readlink -f $dev/uwb_rc) - echo -1 | cat > $uwb_rc/beacon - echo I: stopped beaconing on $(basename $uwb_rc) >&2 done ;; set-chid) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 335aef4dcaeb..b8d470596b0c 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -152,3 +152,4 @@ 151 -> ADS Tech Instant HDTV [1421:0380] 152 -> Asus Tiger Rev:1.00 [1043:4857] 153 -> Kworld Plus TV Analog Lite PCI [17de:7128] +154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d] diff --git a/Documentation/video4linux/si470x.txt b/Documentation/video4linux/si470x.txt index 11c5fd22a332..49679e6aaa76 100644 --- a/Documentation/video4linux/si470x.txt +++ b/Documentation/video4linux/si470x.txt @@ -41,6 +41,7 @@ chips are known to work: - 10c4:818a: Silicon Labs USB FM Radio Reference Design - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) +- 10c5:819a: DealExtreme USB Radio Software diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index eeae76c22a93..ff124374e9ba 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -184,7 +184,7 @@ may be NULL if the subdev driver does not support anything from that category. It looks like this: struct v4l2_subdev_core_ops { - int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip); + int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); int (*init)(struct v4l2_subdev *sd, u32 val); ... @@ -390,16 +390,18 @@ allocated memory. You should also set these fields: -- parent: set to the parent device (same device as was used to register - v4l2_device). +- v4l2_dev: set to the v4l2_device parent device. - name: set to something descriptive and unique. -- fops: set to the file_operations struct. +- fops: set to the v4l2_file_operations struct. - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the future!), then set this to your v4l2_ioctl_ops struct. -If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to -__video_ioctl2 or .ioctl to video_ioctl2 in your file_operations struct. +If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or +.ioctl to video_ioctl2 in your v4l2_file_operations struct. + +The v4l2_file_operations struct is a subset of file_operations. The main +difference is that the inode argument is omitted since it is never used. video_device registration @@ -410,7 +412,7 @@ for you. err = video_register_device(vdev, VFL_TYPE_GRABBER, -1); if (err) { - video_device_release(vdev); // or kfree(my_vdev); + video_device_release(vdev); /* or kfree(my_vdev); */ return err; } @@ -516,5 +518,4 @@ void *video_drvdata(struct file *file); You can go from a video_device struct to the v4l2_device struct using: -struct v4l2_device *v4l2_dev = dev_get_drvdata(vdev->parent); - +struct v4l2_device *v4l2_dev = vdev->v4l2_dev; diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 125eed560e5a..0706a7282a8c 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -137,13 +137,6 @@ shrink_page_list() where they will be detected when vmscan walks the reverse map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list() will cull the page at that point. -Note that for anonymous pages, shrink_page_list() attempts to add the page to -the swap cache before it tries to unmap the page. To avoid this unnecessary -consumption of swap space, shrink_page_list() calls try_to_munlock() to check -whether any VM_LOCKED vmas map the page without attempting to unmap the page. -If try_to_munlock() returns SWAP_MLOCK, shrink_page_list() will cull the page -without consuming swap space. try_to_munlock() will be described below. - To "cull" an unevictable page, vmscan simply puts the page back on the lru list using putback_lru_page()--the inverse operation to isolate_lru_page()-- after dropping the page lock. Because the condition which makes the page @@ -190,8 +183,8 @@ several places: in the VM_LOCKED flag being set for the vma. 3) in the fault path, if mlocked pages are "culled" in the fault path, and when a VM_LOCKED stack segment is expanded. -4) as mentioned above, in vmscan:shrink_page_list() with attempting to - reclaim a page in a VM_LOCKED vma--via try_to_unmap() or try_to_munlock(). +4) as mentioned above, in vmscan:shrink_page_list() when attempting to + reclaim a page in a VM_LOCKED vma via try_to_unmap(). Mlocked pages become unlocked and rescued from the unevictable list when: @@ -260,9 +253,9 @@ mlock_fixup() filters several classes of "special" vmas: 2) vmas mapping hugetlbfs page are already effectively pinned into memory. We don't need nor want to mlock() these pages. However, to preserve the - prior behavior of mlock()--before the unevictable/mlock changes--mlock_fixup() - will call make_pages_present() in the hugetlbfs vma range to allocate the - huge pages and populate the ptes. + prior behavior of mlock()--before the unevictable/mlock changes-- + mlock_fixup() will call make_pages_present() in the hugetlbfs vma range + to allocate the huge pages and populate the ptes. 3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of kernel pages, such as the vdso page, relay channel pages, etc. These pages @@ -322,7 +315,7 @@ __mlock_vma_pages_range()--the same function used to mlock a vma range-- passing a flag to indicate that munlock() is being performed. Because the vma access protections could have been changed to PROT_NONE after -faulting in and mlocking some pages, get_user_pages() was unreliable for visiting +faulting in and mlocking pages, get_user_pages() was unreliable for visiting these pages for munlocking. Because we don't want to leave pages mlocked(), get_user_pages() was enhanced to accept a flag to ignore the permissions when fetching the pages--all of which should be resident as a result of previous @@ -416,8 +409,8 @@ Mlocked Pages: munmap()/exit()/exec() System Call Handling When unmapping an mlocked region of memory, whether by an explicit call to munmap() or via an internal unmap from exit() or exec() processing, we must munlock the pages if we're removing the last VM_LOCKED vma that maps the pages. -Before the unevictable/mlock changes, mlocking did not mark the pages in any way, -so unmapping them required no processing. +Before the unevictable/mlock changes, mlocking did not mark the pages in any +way, so unmapping them required no processing. To munlock a range of memory under the unevictable/mlock infrastructure, the munmap() hander and task address space tear down function call @@ -517,12 +510,10 @@ couldn't be mlocked. Mlocked pages: try_to_munlock() Reverse Map Scan TODO/FIXME: a better name might be page_mlocked()--analogous to the -page_referenced() reverse map walker--especially if we continue to call this -from shrink_page_list(). See related TODO/FIXME below. +page_referenced() reverse map walker. -When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() System -Call Handling" above--tries to munlock a page, or when shrink_page_list() -encounters an anonymous page that is not yet in the swap cache, they need to +When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() +System Call Handling" above--tries to munlock a page, it needs to determine whether or not the page is mapped by any VM_LOCKED vma, without actually attempting to unmap all ptes from the page. For this purpose, the unevictable/mlock infrastructure introduced a variant of try_to_unmap() called @@ -535,10 +526,7 @@ for VM_LOCKED vmas. When such a vma is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions attempt to acquire the associated mmap semphore, mlock the page via mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the -pre-clearing of the page's PG_mlocked done by munlock_vma_page() and informs -shrink_page_list() that the anonymous page should be culled rather than added -to the swap cache in preparation for a try_to_unmap() that will almost -certainly fail. +pre-clearing of the page's PG_mlocked done by munlock_vma_page. If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() @@ -557,10 +545,7 @@ However, the scan can terminate when it encounters a VM_LOCKED vma and can successfully acquire the vma's mmap semphore for read and mlock the page. Although try_to_munlock() can be called many [very many!] times when munlock()ing a large region or tearing down a large address space that has been -mlocked via mlockall(), overall this is a fairly rare event. In addition, -although shrink_page_list() calls try_to_munlock() for every anonymous page that -it handles that is not yet in the swap cache, on average anonymous pages will -have very short reverse map lists. +mlocked via mlockall(), overall this is a fairly rare event. Mlocked Page: Page Reclaim in shrink_*_list() @@ -588,8 +573,8 @@ Some examples of these unevictable pages on the LRU lists are: munlock_vma_page() was forced to let the page back on to the normal LRU list for vmscan to handle. -shrink_inactive_list() also culls any unevictable pages that it finds -on the inactive lists, again diverting them to the appropriate zone's unevictable +shrink_inactive_list() also culls any unevictable pages that it finds on +the inactive lists, again diverting them to the appropriate zone's unevictable lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from @@ -597,19 +582,7 @@ the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter, but will pass on to shrink_page_list(). shrink_page_list() again culls obviously unevictable pages that it could -encounter for similar reason to shrink_inactive_list(). As already discussed, -shrink_page_list() proactively looks for anonymous pages that should have -PG_mlocked set but don't--these would not be detected by page_evictable()--to -avoid adding them to the swap cache unnecessarily. File pages mapped into +encounter for similar reason to shrink_inactive_list(). Pages mapped into VM_LOCKED vmas but without PG_mlocked set will make it all the way to -try_to_unmap(). shrink_page_list() will divert them to the unevictable list when -try_to_unmap() returns SWAP_MLOCK, as discussed above. - -TODO/FIXME: If we can enhance the swap cache to reliably remove entries -with page_count(page) > 2, as long as all ptes are mapped to the page and -not the swap entry, we can probably remove the call to try_to_munlock() in -shrink_page_list() and just remove the page from the swap cache when -try_to_unmap() returns SWAP_MLOCK. Currently, remove_exclusive_swap_page() -doesn't seem to allow that. - - +try_to_unmap(). shrink_page_list() will divert them to the unevictable list +when try_to_unmap() returns SWAP_MLOCK, as discussed above. diff --git a/Documentation/wimax/README.i2400m b/Documentation/wimax/README.i2400m new file mode 100644 index 000000000000..7dffd8919cb0 --- /dev/null +++ b/Documentation/wimax/README.i2400m @@ -0,0 +1,260 @@ + + Driver for the Intel Wireless Wimax Connection 2400m + + (C) 2008 Intel Corporation < linux-wimax@intel.com > + + This provides a driver for the Intel Wireless WiMAX Connection 2400m + and a basic Linux kernel WiMAX stack. + +1. Requirements + + * Linux installation with Linux kernel 2.6.22 or newer (if building + from a separate tree) + * Intel i2400m Echo Peak or Baxter Peak; this includes the Intel + Wireless WiMAX/WiFi Link 5x50 series. + * build tools: + + Linux kernel development package for the target kernel; to + build against your currently running kernel, you need to have + the kernel development package corresponding to the running + image installed (usually if your kernel is named + linux-VERSION, the development package is called + linux-dev-VERSION or linux-headers-VERSION). + + GNU C Compiler, make + +2. Compilation and installation + +2.1. Compilation of the drivers included in the kernel + + Configure the kernel; to enable the WiMAX drivers select Drivers > + Networking Drivers > WiMAX device support. Enable all of them as + modules (easier). + + If USB or SDIO are not enabled in the kernel configuration, the options + to build the i2400m USB or SDIO drivers will not show. Enable said + subsystems and go back to the WiMAX menu to enable the drivers. + + Compile and install your kernel as usual. + +2.2. Compilation of the drivers distributed as an standalone module + + To compile + +$ cd source/directory +$ make + + Once built you can load and unload using the provided load.sh script; + load.sh will load the modules, load.sh u will unload them. + + To install in the default kernel directories (and enable auto loading + when the device is plugged): + +$ make install +$ depmod -a + + If your kernel development files are located in a non standard + directory or if you want to build for a kernel that is not the + currently running one, set KDIR to the right location: + +$ make KDIR=/path/to/kernel/dev/tree + + For more information, please contact linux-wimax@intel.com. + +3. Installing the firmware + + The firmware can be obtained from http://linuxwimax.org or might have + been supplied with your hardware. + + It has to be installed in the target system: + * +$ cp FIRMWAREFILE.sbcf /lib/firmware/i2400m-fw-BUSTYPE-1.3.sbcf + + * NOTE: if your firmware came in an .rpm or .deb file, just install + it as normal, with the rpm (rpm -i FIRMWARE.rpm) or dpkg + (dpkg -i FIRMWARE.deb) commands. No further action is needed. + * BUSTYPE will be usb or sdio, depending on the hardware you have. + Each hardware type comes with its own firmware and will not work + with other types. + +4. Design + + This package contains two major parts: a WiMAX kernel stack and a + driver for the Intel i2400m. + + The WiMAX stack is designed to provide for common WiMAX control + services to current and future WiMAX devices from any vendor; please + see README.wimax for details. + + The i2400m kernel driver is broken up in two main parts: the bus + generic driver and the bus-specific drivers. The bus generic driver + forms the drivercore and contain no knowledge of the actual method we + use to connect to the device. The bus specific drivers are just the + glue to connect the bus-generic driver and the device. Currently only + USB and SDIO are supported. See drivers/net/wimax/i2400m/i2400m.h for + more information. + + The bus generic driver is logically broken up in two parts: OS-glue and + hardware-glue. The OS-glue interfaces with Linux. The hardware-glue + interfaces with the device on using an interface provided by the + bus-specific driver. The reason for this breakup is to be able to + easily reuse the hardware-glue to write drivers for other OSes; note + the hardware glue part is written as a native Linux driver; no + abstraction layers are used, so to port to another OS, the Linux kernel + API calls should be replaced with the target OS's. + +5. Usage + + To load the driver, follow the instructions in the install section; + once the driver is loaded, plug in the device (unless it is permanently + plugged in). The driver will enumerate the device, upload the firmware + and output messages in the kernel log (dmesg, /var/log/messages or + /var/log/kern.log) such as: + +... +i2400m_usb 5-4:1.0: firmware interface version 8.0.0 +i2400m_usb 5-4:1.0: WiMAX interface wmx0 (00:1d:e1:01:94:2c) ready + + At this point the device is ready to work. + + Current versions require the Intel WiMAX Network Service in userspace + to make things work. See the network service's README for instructions + on how to scan, connect and disconnect. + +5.1. Module parameters + + Module parameters can be set at kernel or module load time or by + echoing values: + +$ echo VALUE > /sys/module/MODULENAME/parameters/PARAMETERNAME + + To make changes permanent, for example, for the i2400m module, you can + also create a file named /etc/modprobe.d/i2400m containing: + +options i2400m idle_mode_disabled=1 + + To find which parameters are supported by a module, run: + +$ modinfo path/to/module.ko + + During kernel bootup (if the driver is linked in the kernel), specify + the following to the kernel command line: + +i2400m.PARAMETER=VALUE + +5.1.1. i2400m: idle_mode_disabled + + The i2400m module supports a parameter to disable idle mode. This + parameter, once set, will take effect only when the device is + reinitialized by the driver (eg: following a reset or a reconnect). + +5.2. Debug operations: debugfs entries + + The driver will register debugfs entries that allow the user to tweak + debug settings. There are three main container directories where + entries are placed, which correspond to the three blocks a i2400m WiMAX + driver has: + * /sys/kernel/debug/wimax:DEVNAME/ for the generic WiMAX stack + controls + * /sys/kernel/debug/wimax:DEVNAME/i2400m for the i2400m generic + driver controls + * /sys/kernel/debug/wimax:DEVNAME/i2400m-usb (or -sdio) for the + bus-specific i2400m-usb or i2400m-sdio controls). + + Of course, if debugfs is mounted in a directory other than + /sys/kernel/debug, those paths will change. + +5.2.1. Increasing debug output + + The files named *dl_* indicate knobs for controlling the debug output + of different submodules: + * +# find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\* +/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_tx +/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_rx +/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_notif +/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_fw +/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_usb +/sys/kernel/debug/wimax:wmx0/i2400m/dl_tx +/sys/kernel/debug/wimax:wmx0/i2400m/dl_rx +/sys/kernel/debug/wimax:wmx0/i2400m/dl_rfkill +/sys/kernel/debug/wimax:wmx0/i2400m/dl_netdev +/sys/kernel/debug/wimax:wmx0/i2400m/dl_fw +/sys/kernel/debug/wimax:wmx0/i2400m/dl_debugfs +/sys/kernel/debug/wimax:wmx0/i2400m/dl_driver +/sys/kernel/debug/wimax:wmx0/i2400m/dl_control +/sys/kernel/debug/wimax:wmx0/wimax_dl_stack +/sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill +/sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset +/sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg +/sys/kernel/debug/wimax:wmx0/wimax_dl_id_table +/sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs + + By reading the file you can obtain the current value of said debug + level; by writing to it, you can set it. + + To increase the debug level of, for example, the i2400m's generic TX + engine, just write: + +$ echo 3 > /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx + + Increasing numbers yield increasing debug information; for details of + what is printed and the available levels, check the source. The code + uses 0 for disabled and increasing values until 8. + +5.2.2. RX and TX statistics + + The i2400m/rx_stats and i2400m/tx_stats provide statistics about the + data reception/delivery from the device: + +$ cat /sys/kernel/debug/wimax:wmx0/i2400m/rx_stats +45 1 3 34 3104 48 480 + + The numbers reported are + * packets/RX-buffer: total, min, max + * RX-buffers: total RX buffers received, accumulated RX buffer size + in bytes, min size received, max size received + + Thus, to find the average buffer size received, divide accumulated + RX-buffer / total RX-buffers. + + To clear the statistics back to 0, write anything to the rx_stats file: + +$ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m_rx_stats + + Likewise for TX. + + Note the packets this debug file refers to are not network packet, but + packets in the sense of the device-specific protocol for communication + to the host. See drivers/net/wimax/i2400m/tx.c. + +5.2.3. Tracing messages received from user space + + To echo messages received from user space into the trace pipe that the + i2400m driver creates, set the debug file i2400m/trace_msg_from_user to + 1: + * +$ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m/trace_msg_from_user + +5.2.4. Performing a device reset + + By writing a 0, a 1 or a 2 to the file + /sys/kernel/debug/wimax:wmx0/reset, the driver performs a warm (without + disconnecting from the bus), cold (disconnecting from the bus) or bus + (bus specific) reset on the device. + +5.2.5. Asking the device to enter power saving mode + + By writing any value to the /sys/kernel/debug/wimax:wmx0 file, the + device will attempt to enter power saving mode. + +6. Troubleshooting + +6.1. Driver complains about 'i2400m-fw-usb-1.2.sbcf: request failed' + + If upon connecting the device, the following is output in the kernel + log: + +i2400m_usb 5-4:1.0: fw i2400m-fw-usb-1.3.sbcf: request failed: -2 + + This means that the driver cannot locate the firmware file named + /lib/firmware/i2400m-fw-usb-1.2.sbcf. Check that the file is present in + the right location. diff --git a/Documentation/wimax/README.wimax b/Documentation/wimax/README.wimax new file mode 100644 index 000000000000..b78c4378084e --- /dev/null +++ b/Documentation/wimax/README.wimax @@ -0,0 +1,81 @@ + + Linux kernel WiMAX stack + + (C) 2008 Intel Corporation < linux-wimax@intel.com > + + This provides a basic Linux kernel WiMAX stack to provide a common + control API for WiMAX devices, usable from kernel and user space. + +1. Design + + The WiMAX stack is designed to provide for common WiMAX control + services to current and future WiMAX devices from any vendor. + + Because currently there is only one and we don't know what would be the + common services, the APIs it currently provides are very minimal. + However, it is done in such a way that it is easily extensible to + accommodate future requirements. + + The stack works by embedding a struct wimax_dev in your device's + control structures. This provides a set of callbacks that the WiMAX + stack will call in order to implement control operations requested by + the user. As well, the stack provides API functions that the driver + calls to notify about changes of state in the device. + + The stack exports the API calls needed to control the device to user + space using generic netlink as a marshalling mechanism. You can access + them using your own code or use the wrappers provided for your + convenience in libwimax (in the wimax-tools package). + + For detailed information on the stack, please see + include/linux/wimax.h. + +2. Usage + + For usage in a driver (registration, API, etc) please refer to the + instructions in the header file include/linux/wimax.h. + + When a device is registered with the WiMAX stack, a set of debugfs + files will appear in /sys/kernel/debug/wimax:wmxX can tweak for + control. + +2.1. Obtaining debug information: debugfs entries + + The WiMAX stack is compiled, by default, with debug messages that can + be used to diagnose issues. By default, said messages are disabled. + + The drivers will register debugfs entries that allow the user to tweak + debug settings. + + Each driver, when registering with the stack, will cause a debugfs + directory named wimax:DEVICENAME to be created; optionally, it might + create more subentries below it. + +2.1.1. Increasing debug output + + The files named *dl_* indicate knobs for controlling the debug output + of different submodules of the WiMAX stack: + * +# find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\* +/sys/kernel/debug/wimax:wmx0/wimax_dl_stack +/sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill +/sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset +/sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg +/sys/kernel/debug/wimax:wmx0/wimax_dl_id_table +/sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs +/sys/kernel/debug/wimax:wmx0/.... # other driver specific files + + NOTE: Of course, if debugfs is mounted in a directory other than + /sys/kernel/debug, those paths will change. + + By reading the file you can obtain the current value of said debug + level; by writing to it, you can set it. + + To increase the debug level of, for example, the id-table submodule, + just write: + +$ echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table + + Increasing numbers yield increasing debug information; for details of + what is printed and the available levels, check the source. The code + uses 0 for disabled and increasing values until 8. diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index 169ad423a3d1..4f913857b8a2 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -3,7 +3,7 @@ protocol of kernel. These should be filled by bootloader or 16-bit real-mode setup code of the kernel. References/settings to it mainly are in: - include/asm-x86/bootparam.h + arch/x86/include/asm/bootparam.h Offset Proto Name Meaning |