diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/rockchip-spdif.txt | 40 |
2 files changed, 42 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20b306b..2267d249ca0e 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -12,8 +12,6 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. -- #address-cells: should be 1. -- #size-cells: should be 0. - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". @@ -21,6 +19,7 @@ Required properties: - clock-names: should contain followings: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +- rockchip,capture-channels: max capture channels, if not set, 2 channels default. Example for rk3288 I2S controller: @@ -28,10 +27,9 @@ i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,capture-channels = <2>; }; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt new file mode 100644 index 000000000000..e64dbdea7db9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -0,0 +1,40 @@ +* Rockchip SPDIF transceiver + +The S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + +- compatible: should be one of the following: + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or + "rockchip,rk3066-spdif" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the SPDIF interrupt. +- dmas: DMA specifiers for tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should be "tx" +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain following: + - "hclk": clock for SPDIF controller + - "mclk" : clock for SPDIF bus + +Required properties on RK3288: + - rockchip,grf: the phandle of the syscon node for the general register + file (GRF) + +Example for the rk3188 SPDIF controller: + +spdif: spdif@0x1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + status = "disabled"; + #sound-dai-cells = <0>; +}; |