summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/powerpc/booting-without-of.txt19
-rw-r--r--Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl8
2 files changed, 15 insertions, 12 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b3bd36668db3..33994271cb3b 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1703,29 +1703,32 @@ platforms are moved over to use the flattened-device-tree model.
Required properties:
- device_type : has to be "rom"
- - compatible : Should specify what this ROM device is compatible with
- (i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
- (which corresponds to the MTD physmap mapping driver).
- - regs : Offset and length of the register set (or memory mapping) for
+ - compatible : Should specify what this flash device is compatible with.
+ Currently, this is most likely to be "direct-mapped" (which
+ corresponds to the MTD physmap mapping driver).
+ - reg : Offset and length of the register set (or memory mapping) for
the device.
+ - bank-width : Width of the flash data bus in bytes. Required
+ for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
Recommended properties :
- - bank-width : Width of the flash data bus in bytes. Required
- for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
- partitions : Several pairs of 32-bit values where the first value is
partition's offset from the start of the device and the second one is
partition size in bytes with LSB used to signify a read only
- partititon (so, the parition size should always be an even number).
+ partition (so, the parition size should always be an even number).
- partition-names : The list of concatenated zero terminated strings
representing the partition names.
+ - probe-type : The type of probe which should be done for the chip
+ (JEDEC vs CFI actually). Valid ONLY for NOR flashes.
Example:
flash@ff000000 {
device_type = "rom";
compatible = "direct-mapped";
- regs = <ff000000 01000000>;
+ probe-type = "CFI";
+ reg = <ff000000 01000000>;
bank-width = <4>;
partitions = <00000000 00f80000
00f80000 00080001>;
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 077fbe25ebf4..ccd0a953953d 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -927,7 +927,7 @@
<informalexample>
<programlisting>
<![CDATA[
- struct mychip *chip = (struct mychip *)card->private_data;
+ struct mychip *chip = card->private_data;
]]>
</programlisting>
</informalexample>
@@ -1095,7 +1095,7 @@
/* release the irq */
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
/* release the i/o ports & memory */
pci_release_regions(chip->pci);
/* disable the PCI entry */
@@ -1148,7 +1148,7 @@
}
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_mychip_interrupt,
- IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
+ IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
@@ -1387,7 +1387,7 @@
<programlisting>
<![CDATA[
if (chip->irq >= 0)
- free_irq(chip->irq, (void *)chip);
+ free_irq(chip->irq, chip);
]]>
</programlisting>
</informalexample>