diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-class-ubi | 212 | ||||
| -rw-r--r-- | Documentation/HOWTO | 30 | ||||
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/NAND.txt | 30 | ||||
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/Overview.txt | 2 | ||||
| -rw-r--r-- | Documentation/filesystems/nfs-rdma.txt | 14 | ||||
| -rw-r--r-- | Documentation/filesystems/seq_file.txt | 19 | ||||
| -rw-r--r-- | Documentation/kbuild/modules.txt | 9 | ||||
| -rw-r--r-- | Documentation/networking/phy.txt | 38 |
8 files changed, 332 insertions, 22 deletions
diff --git a/Documentation/ABI/stable/sysfs-class-ubi b/Documentation/ABI/stable/sysfs-class-ubi new file mode 100644 index 000000000000..18d471d9faea --- /dev/null +++ b/Documentation/ABI/stable/sysfs-class-ubi @@ -0,0 +1,212 @@ +What: /sys/class/ubi/ +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + The ubi/ class sub-directory belongs to the UBI subsystem and + provides general UBI information, per-UBI device information + and per-UBI volume information. + +What: /sys/class/ubi/version +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + This file contains version of the latest supported UBI on-media + format. Currently it is 1, and there is no plan to change this. + However, if in the future UBI needs on-flash format changes + which cannot be done in a compatible manner, a new format + version will be added. So this is a mechanism for possible + future backward-compatible (but forward-incompatible) + improvements. + +What: /sys/class/ubiX/ +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + The /sys/class/ubi0, /sys/class/ubi1, etc directories describe + UBI devices (UBI device 0, 1, etc). They contain general UBI + device information and per UBI volume information (each UBI + device may have many UBI volumes) + +What: /sys/class/ubi/ubiX/avail_eraseblocks +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Amount of available logical eraseblock. For example, one may + create a new UBI volume which has this amount of logical + eraseblocks. + +What: /sys/class/ubi/ubiX/bad_peb_count +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Count of bad physical eraseblocks on the underlying MTD device. + +What: /sys/class/ubi/ubiX/bgt_enabled +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Contains ASCII "0\n" if the UBI background thread is disabled, + and ASCII "1\n" if it is enabled. + +What: /sys/class/ubi/ubiX/dev +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Major and minor numbers of the character device corresponding + to this UBI device (in <major>:<minor> format). + +What: /sys/class/ubi/ubiX/eraseblock_size +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Maximum logical eraseblock size this UBI device may provide. UBI + volumes may have smaller logical eraseblock size because of their + alignment. + +What: /sys/class/ubi/ubiX/max_ec +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Maximum physical eraseblock erase counter value. + +What: /sys/class/ubi/ubiX/max_vol_count +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Maximum number of volumes which this UBI device may have. + +What: /sys/class/ubi/ubiX/min_io_size +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Minimum input/output unit size. All the I/O may only be done + in fractions of the contained number. + +What: /sys/class/ubi/ubiX/mtd_num +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Number of the underlying MTD device. + +What: /sys/class/ubi/ubiX/reserved_for_bad +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Number of physical eraseblocks reserved for bad block handling. + +What: /sys/class/ubi/ubiX/total_eraseblocks +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Total number of good (not marked as bad) physical eraseblocks on + the underlying MTD device. + +What: /sys/class/ubi/ubiX/volumes_count +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Count of volumes on this UBI device. + +What: /sys/class/ubi/ubiX/ubiX_Y/ +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/, + etc directories describe UBI volumes on UBI device X (volumes + 0, 1, etc). + +What: /sys/class/ubi/ubiX/ubiX_Y/alignment +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Volume alignment - the value the logical eraseblock size of + this volume has to be aligned on. For example, 2048 means that + logical eraseblock size is multiple of 2048. In other words, + volume logical eraseblock size is UBI device logical eraseblock + size aligned to the alignment value. + +What: /sys/class/ubi/ubiX/ubiX_Y/corrupted +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n" + if it is corrupted (e.g., due to an interrupted volume update). + +What: /sys/class/ubi/ubiX/ubiX_Y/data_bytes +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + The amount of data this volume contains. This value makes sense + only for static volumes, and for dynamic volume it equivalent + to the total volume size in bytes. + +What: /sys/class/ubi/ubiX/ubiX_Y/dev +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Major and minor numbers of the character device corresponding + to this UBI volume (in <major>:<minor> format). + +What: /sys/class/ubi/ubiX/ubiX_Y/name +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Volume name. + +What: /sys/class/ubi/ubiX/ubiX_Y/reserved_ebs +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Count of physical eraseblock reserved for this volume. + Equivalent to the volume size in logical eraseblocks. + +What: /sys/class/ubi/ubiX/ubiX_Y/type +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Volume type. Contains ASCII "dynamic\n" for dynamic volumes and + "static\n" for static volumes. + +What: /sys/class/ubi/ubiX/ubiX_Y/upd_marker +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Contains ASCII "0\n" if the update marker is not set for this + volume, and "1\n" if it is set. The update marker is set when + volume update starts, and cleaned when it ends. So the presence + of the update marker indicates that the volume is being updated + at the moment of the update was interrupted. The later may be + checked using the "corrupted" sysfs file. + +What: /sys/class/ubi/ubiX/ubiX_Y/usable_eb_size +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy <dedekind@infradead.org> +Description: + Logical eraseblock size of this volume. Equivalent to logical + eraseblock size of the device aligned on the volume alignment + value. diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 54835610b3d6..0291ade44c17 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -249,9 +249,11 @@ process is as follows: release a new -rc kernel every week. - Process continues until the kernel is considered "ready", the process should last around 6 weeks. - - A list of known regressions present in each -rc release is - tracked at the following URI: - http://kernelnewbies.org/known_regressions + - Known regressions in each release are periodically posted to the + linux-kernel mailing list. The goal is to reduce the length of + that list to zero before declaring the kernel to be "ready," but, in + the real world, a small number of regressions often remain at + release time. It is worth mentioning what Andrew Morton wrote on the linux-kernel mailing list about kernel releases: @@ -261,7 +263,7 @@ mailing list about kernel releases: 2.6.x.y -stable kernel tree --------------------------- -Kernels with 4 digit versions are -stable kernels. They contain +Kernels with 4-part versions are -stable kernels. They contain relatively small and critical fixes for security problems or significant regressions discovered in a given 2.6.x kernel. @@ -273,7 +275,10 @@ If no 2.6.x.y kernel is available, then the highest numbered 2.6.x kernel is the current stable kernel. 2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are -released almost every other week. +released as needs dictate. The normal release period is approximately +two weeks, but it can be longer if there are no pressing problems. A +security-related problem, instead, can cause a release to happen almost +instantly. The file Documentation/stable_kernel_rules.txt in the kernel tree documents what kinds of changes are acceptable for the -stable tree, and @@ -298,7 +303,9 @@ a while Andrew or the subsystem maintainer pushes it on to Linus for inclusion in mainline. It is heavily encouraged that all new patches get tested in the -mm tree -before they are sent to Linus for inclusion in the main kernel tree. +before they are sent to Linus for inclusion in the main kernel tree. Code +which does not make an appearance in -mm before the opening of the merge +window will prove hard to merge into the mainline. These kernels are not appropriate for use on systems that are supposed to be stable and they are more risky to run than any of the other @@ -354,11 +361,12 @@ Here is a list of some of the different kernel trees available: - SCSI, James Bottomley <James.Bottomley@SteelEye.com> git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git + - x86, Ingo Molnar <mingo@elte.hu> + git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git + quilt trees: - - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de> + - USB, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de> kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ - - x86-64, partly i386, Andi Kleen <ak@suse.de> - ftp.firstfloor.org:/pub/ak/x86_64/quilt/ Other kernel trees can be found listed at http://git.kernel.org/ and in the MAINTAINERS file. @@ -392,8 +400,8 @@ If you want to be advised of the future bug reports, you can subscribe to the bugme-new mailing list (only new bug reports are mailed here) or to the bugme-janitor mailing list (every change in the bugzilla is mailed here) - http://lists.osdl.org/mailman/listinfo/bugme-new - http://lists.osdl.org/mailman/listinfo/bugme-janitors + http://lists.linux-foundation.org/mailman/listinfo/bugme-new + http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors diff --git a/Documentation/arm/Samsung-S3C24XX/NAND.txt b/Documentation/arm/Samsung-S3C24XX/NAND.txt new file mode 100644 index 000000000000..bc478a3409b8 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/NAND.txt @@ -0,0 +1,30 @@ + S3C24XX NAND Support + ==================== + +Introduction +------------ + +Small Page NAND +--------------- + +The driver uses a 512 byte (1 page) ECC code for this setup. The +ECC code is not directly compatible with the default kernel ECC +code, so the driver enforces its own OOB layout and ECC parameters + +Large Page NAND +--------------- + +The driver is capable of handling NAND flash with a 2KiB page +size, with support for hardware ECC generation and correction. + +Unlike the 512byte page mode, the driver generates ECC data for +each 256 byte block in an 2KiB page. This means that more than +one error in a page can be rectified. It also means that the +OOB layout remains the default kernel layout for these flashes. + + +Document Author +--------------- + +Ben Dooks, Copyright 2007 Simtec Electronics + diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index c31b76fa66c4..d04e1e30c47f 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -156,6 +156,8 @@ NAND controller. If there are any problems the latest linux-mtd code can be found from http://www.linux-mtd.infradead.org/ + For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt + Serial ------ diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt index 1ae34879574b..d0ec45ae4e7d 100644 --- a/Documentation/filesystems/nfs-rdma.txt +++ b/Documentation/filesystems/nfs-rdma.txt @@ -5,7 +5,7 @@ ################################################################################ Author: NetApp and Open Grid Computing - Date: February 25, 2008 + Date: April 15, 2008 Table of Contents ~~~~~~~~~~~~~~~~~ @@ -197,12 +197,16 @@ NFS/RDMA Setup - On the server system, configure the /etc/exports file and start the NFS/RDMA server. - Exports entries with the following format have been tested: + Exports entries with the following formats have been tested: - /vol0 10.97.103.47(rw,async) 192.168.0.47(rw,async,insecure,no_root_squash) + /vol0 192.168.0.47(fsid=0,rw,async,insecure,no_root_squash) + /vol0 192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash) - Here the first IP address is the client's Ethernet address and the second - IP address is the clients IPoIB address. + The IP address(es) is(are) the client's IPoIB address for an InfiniBand HCA or the + cleint's iWARP address(es) for an RNIC. + + NOTE: The "insecure" option must be used because the NFS/RDMA client does not + use a reserved port. Each time a machine boots: diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt index 7fb8e6dc62bf..b843743aa0b5 100644 --- a/Documentation/filesystems/seq_file.txt +++ b/Documentation/filesystems/seq_file.txt @@ -122,8 +122,7 @@ stop() is the place to free it. } Finally, the show() function should format the object currently pointed to -by the iterator for output. It should return zero, or an error code if -something goes wrong. The example module's show() function is: +by the iterator for output. The example module's show() function is: static int ct_seq_show(struct seq_file *s, void *v) { @@ -132,6 +131,12 @@ something goes wrong. The example module's show() function is: return 0; } +If all is well, the show() function should return zero. A negative error +code in the usual manner indicates that something went wrong; it will be +passed back to user space. This function can also return SEQ_SKIP, which +causes the current item to be skipped; if the show() function has already +generated output before returning SEQ_SKIP, that output will be dropped. + We will look at seq_printf() in a moment. But first, the definition of the seq_file iterator is finished by creating a seq_operations structure with the four functions we have just defined: @@ -182,12 +187,18 @@ The first two output a single character and a string, just like one would expect. seq_escape() is like seq_puts(), except that any character in s which is in the string esc will be represented in octal form in the output. -There is also a function for printing filenames: +There is also a pair of functions for printing filenames: int seq_path(struct seq_file *m, struct path *path, char *esc); + int seq_path_root(struct seq_file *m, struct path *path, + struct path *root, char *esc) Here, path indicates the file of interest, and esc is a set of characters -which should be escaped in the output. +which should be escaped in the output. A call to seq_path() will output +the path relative to the current process's filesystem root. If a different +root is desired, it can be used with seq_path_root(). Note that, if it +turns out that path cannot be reached from root, the value of root will be +changed in seq_file_root() to a root which *does* work. Making it all work diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt index 1d247d59ad56..1821c077b435 100644 --- a/Documentation/kbuild/modules.txt +++ b/Documentation/kbuild/modules.txt @@ -486,7 +486,7 @@ Module.symvers contains a list of all exported symbols from a kernel build. Sometimes, an external module uses exported symbols from another external module. Kbuild needs to have full knowledge on all symbols to avoid spitting out warnings about undefined symbols. - Two solutions exist to let kbuild know all symbols of more than + Three solutions exist to let kbuild know all symbols of more than one external module. The method with a top-level kbuild file is recommended but may be impractical in certain situations. @@ -523,6 +523,13 @@ Module.symvers contains a list of all exported symbols from a kernel build. containing the sum of all symbols defined and not part of the kernel. + Use make variable KBUILD_EXTRA_SYMBOLS in the Makefile + If it is impractical to copy Module.symvers from another + module, you can assign a space separated list of files to + KBUILD_EXTRA_SYMBOLS in your Makfile. These files will be + loaded by modpost during the initialisation of its symbol + tables. + === 8. Tips & Tricks --- 8.1 Testing for CONFIG_FOO_BAR diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 0bc95eab1512..8df6a7b0e66c 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -1,7 +1,7 @@ ------- PHY Abstraction Layer -(Updated 2006-11-30) +(Updated 2008-04-08) Purpose @@ -291,3 +291,39 @@ Writing a PHY driver Feel free to look at the Marvell, Cicada, and Davicom drivers in drivers/net/phy/ for examples (the lxt and qsemi drivers have not been tested as of this writing) + +Board Fixups + + Sometimes the specific interaction between the platform and the PHY requires + special handling. For instance, to change where the PHY's clock input is, + or to add a delay to account for latency issues in the data path. In order + to support such contingencies, the PHY Layer allows platform code to register + fixups to be run when the PHY is brought up (or subsequently reset). + + When the PHY Layer brings up a PHY it checks to see if there are any fixups + registered for it, matching based on UID (contained in the PHY device's phy_id + field) and the bus identifier (contained in phydev->dev.bus_id). Both must + match, however two constants, PHY_ANY_ID and PHY_ANY_UID, are provided as + wildcards for the bus ID and UID, respectively. + + When a match is found, the PHY layer will invoke the run function associated + with the fixup. This function is passed a pointer to the phy_device of + interest. It should therefore only operate on that PHY. + + The platform code can either register the fixup using phy_register_fixup(): + + int phy_register_fixup(const char *phy_id, + u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)); + + Or using one of the two stubs, phy_register_fixup_for_uid() and + phy_register_fixup_for_id(): + + int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)); + int phy_register_fixup_for_id(const char *phy_id, + int (*run)(struct phy_device *)); + + The stubs set one of the two matching criteria, and set the other one to + match anything. + |