2 files changed, 179 insertions, 0 deletions
diff --git a/Documentation/trace/intel_th.txt b/Documentation/trace/intel_th.txt
new file mode 100644
index 000000000000..f7fc5ba5df8d
--- /dev/null
+++ b/Documentation/trace/intel_th.txt
@@ -0,0 +1,99 @@
+Intel(R) Trace Hub (TH)
+=======================
+
+Overview
+--------
+
+Intel(R) Trace Hub (TH) is a set of hardware blocks that produce,
+switch and output trace data from multiple hardware and software
+sources over several types of trace output ports encoded in System
+Trace Protocol (MIPI STPv2) and is intended to perform full system
+debugging. For more information on the hardware, see Intel(R) Trace
+Hub developer's manual [1].
+
+It consists of trace sources, trace destinations (outputs) and a
+switch (Global Trace Hub, GTH). These devices are placed on a bus of
+their own ("intel_th"), where they can be discovered and configured
+via sysfs attributes.
+
+Currently, the following Intel TH subdevices (blocks) are supported:
+  - Software Trace Hub (STH), trace source, which is a System Trace
+  Module (STM) device,
+  - Memory Storage Unit (MSU), trace output, which allows storing
+  trace hub output in system memory,
+  - Parallel Trace Interface output (PTI), trace output to an external
+  debug host via a PTI port,
+  - Global Trace Hub (GTH), which is a switch and a central component
+  of Intel(R) Trace Hub architecture.
+
+Common attributes for output devices are described in
+Documentation/ABI/testing/sysfs-bus-intel_th-output-devices, the most
+notable of them is "active", which enables or disables trace output
+into that particular output device.
+
+GTH allows directing different STP masters into different output ports
+via its "masters" attribute group. More detailed GTH interface
+description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth.
+
+STH registers an stm class device, through which it provides interface
+to userspace and kernelspace software trace sources. See
+Documentation/tracing/stm.txt for more information on that.
+
+MSU can be configured to collect trace data into a system memory
+buffer, which can later on be read from its device nodes via read() or
+mmap() interface.
+
+On the whole, Intel(R) Trace Hub does not require any special
+userspace software to function; everything can be configured, started
+and collected via sysfs attributes, and device nodes.
+
+[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
+
+Bus and Subdevices
+------------------
+
+For each Intel TH device in the system a bus of its own is
+created and assigned an id number that reflects the order in which TH
+devices were emumerated. All TH subdevices (devices on intel_th bus)
+begin with this id: 0-gth, 0-msc0, 0-msc1, 0-pti, 0-sth, which is
+followed by device's name and an optional index.
+
+Output devices also get a device node in /dev/intel_thN, where N is
+the Intel TH device id. For example, MSU's memory buffers, when
+allocated, are accessible via /dev/intel_th0/msc{0,1}.
+
+Quick example
+-------------
+
+# figure out which GTH port is the first memory controller:
+
+$ cat /sys/bus/intel_th/devices/0-msc0/port
+0
+
+# looks like it's port 0, configure master 33 to send data to port 0:
+
+$ echo 0 > /sys/bus/intel_th/devices/0-gth/masters/33
+
+# allocate a 2-windowed multiblock buffer on the first memory
+# controller, each with 64 pages:
+
+$ echo multi > /sys/bus/intel_th/devices/0-msc0/mode
+$ echo 64,64 > /sys/bus/intel_th/devices/0-msc0/nr_pages
+
+# enable wrapping for this controller, too:
+
+$ echo 1 > /sys/bus/intel_th/devices/0-msc0/wrap
+
+# and enable tracing into this port:
+
+$ echo 1 > /sys/bus/intel_th/devices/0-msc0/active
+
+# .. send data to master 33, see stm.txt for more details ..
+# .. wait for traces to pile up ..
+# .. and stop the trace:
+
+$ echo 0 > /sys/bus/intel_th/devices/0-msc0/active
+
+# and now you can collect the trace from the device node:
+
+$ cat /dev/intel_th0/msc0 > my_stp_trace
diff --git a/Documentation/trace/stm.txt b/Documentation/trace/stm.txt
new file mode 100644
index 000000000000..ea035f9dbfd7
--- /dev/null
+++ b/Documentation/trace/stm.txt
@@ -0,0 +1,80 @@
+System Trace Module
+===================
+
+System Trace Module (STM) is a device described in MIPI STP specs as
+STP trace stream generator. STP (System Trace Protocol) is a trace
+protocol multiplexing data from multiple trace sources, each one of
+which is assigned a unique pair of master and channel. While some of
+these masters and channels are statically allocated to certain
+hardware trace sources, others are available to software. Software
+trace sources are usually free to pick for themselves any
+master/channel combination from this pool.
+
+On the receiving end of this STP stream (the decoder side), trace
+sources can only be identified by master/channel combination, so in
+order for the decoder to be able to make sense of the trace that
+involves multiple trace sources, it needs to be able to map those
+master/channel pairs to the trace sources that it understands.
+
+For instance, it is helpful to know that syslog messages come on
+master 7 channel 15, while arbitrary user applications can use masters
+48 to 63 and channels 0 to 127.
+
+To solve this mapping problem, stm class provides a policy management
+mechanism via configfs, that allows defining rules that map string
+identifiers to ranges of masters and channels. If these rules (policy)
+are consistent with what decoder expects, it will be able to properly
+process the trace data.
+
+This policy is a tree structure containing rules (policy_node) that
+have a name (string identifier) and a range of masters and channels
+associated with it, located in "stp-policy" subsystem directory in
+configfs. The topmost directory's name (the policy) is formatted as
+the STM device name to which this policy applies and and arbitrary
+string identifier separated by a stop. From the examle above, a rule
+may look like this:
+
+$ ls /config/stp-policy/dummy_stm.my-policy/user
+channels masters
+$ cat /config/stp-policy/dummy_stm.my-policy/user/masters
+48 63
+$ cat /config/stp-policy/dummy_stm.my-policy/user/channels
+0 127
+
+which means that the master allocation pool for this rule consists of
+masters 48 through 63 and channel allocation pool has channels 0
+through 127 in it. Now, any producer (trace source) identifying itself
+with "user" identification string will be allocated a master and
+channel from within these ranges.
+
+These rules can be nested, for example, one can define a rule "dummy"
+under "user" directory from the example above and this new rule will
+be used for trace sources with the id string of "user/dummy".
+
+Trace sources have to open the stm class device's node and write their
+trace data into its file descriptor. In order to identify themselves
+to the policy, they need to do a STP_POLICY_ID_SET ioctl on this file
+descriptor providing their id string. Otherwise, they will be
+automatically allocated a master/channel pair upon first write to this
+file descriptor according to the "default" rule of the policy, if such
+exists.
+
+Some STM devices may allow direct mapping of the channel mmio regions
+to userspace for zero-copy writing. One mappable page (in terms of
+mmu) will usually contain multiple channels' mmios, so the user will
+need to allocate that many channels to themselves (via the
+aforementioned ioctl() call) to be able to do this. That is, if your
+stm device's channel mmio region is 64 bytes and hardware page size is
+4096 bytes, after a successful STP_POLICY_ID_SET ioctl() call with
+width==64, you should be able to mmap() one page on this file
+descriptor and obtain direct access to an mmio region for 64 channels.
+
+For kernel-based trace sources, there is "stm_source" device
+class. Devices of this class can be connected and disconnected to/from
+stm devices at runtime via a sysfs attribute.
+
+Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
+[2].
+
+[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
+[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html