summaryrefslogtreecommitdiffstats
path: root/Documentation/trace/histogram.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/trace/histogram.rst')
-rw-r--r--Documentation/trace/histogram.rst316
1 files changed, 287 insertions, 29 deletions
diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst
index 7dda76503127..0ea59d45aef1 100644
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -25,7 +25,7 @@ Documentation written by Tom Zanussi
hist:keys=<field1[,field2,...]>[:values=<field1[,field2,...]>]
[:sort=<field1[,field2,...]>][:size=#entries][:pause][:continue]
- [:clear][:name=histname1] [if <filter>]
+ [:clear][:name=histname1][:<handler>.<action>] [if <filter>]
When a matching event is hit, an entry is added to a hash table
using the key(s) and value(s) named. Keys and values correspond to
@@ -1831,41 +1831,87 @@ and looks and behaves just like any other event::
Like any other event, once a histogram is enabled for the event, the
output can be displayed by reading the event's 'hist' file.
-2.2.3 Hist trigger 'actions'
-----------------------------
+2.2.3 Hist trigger 'handlers' and 'actions'
+-------------------------------------------
-A hist trigger 'action' is a function that's executed whenever a
-histogram entry is added or updated.
+A hist trigger 'action' is a function that's executed (in most cases
+conditionally) whenever a histogram entry is added or updated.
-The default 'action' if no special function is explicitly specified is
-as it always has been, to simply update the set of values associated
-with an entry. Some applications, however, may want to perform
-additional actions at that point, such as generate another event, or
-compare and save a maximum.
+When a histogram entry is added or updated, a hist trigger 'handler'
+is what decides whether the corresponding action is actually invoked
+or not.
-The following additional actions are available. To specify an action
-for a given event, simply specify the action between colons in the
-hist trigger specification.
+Hist trigger handlers and actions are paired together in the general
+form:
- - onmatch(matching.event).<synthetic_event_name>(param list)
+ <handler>.<action>
- The 'onmatch(matching.event).<synthetic_event_name>(params)' hist
- trigger action is invoked whenever an event matches and the
- histogram entry would be added or updated. It causes the named
- synthetic event to be generated with the values given in the
+To specify a handler.action pair for a given event, simply specify
+that handler.action pair between colons in the hist trigger
+specification.
+
+In theory, any handler can be combined with any action, but in
+practice, not every handler.action combination is currently supported;
+if a given handler.action combination isn't supported, the hist
+trigger will fail with -EINVAL;
+
+The default 'handler.action' if none is explicity specified is as it
+always has been, to simply update the set of values associated with an
+entry. Some applications, however, may want to perform additional
+actions at that point, such as generate another event, or compare and
+save a maximum.
+
+The supported handlers and actions are listed below, and each is
+described in more detail in the following paragraphs, in the context
+of descriptions of some common and useful handler.action combinations.
+
+The available handlers are:
+
+ - onmatch(matching.event) - invoke action on any addition or update
+ - onmax(var) - invoke action if var exceeds current max
+ - onchange(var) - invoke action if var changes
+
+The available actions are:
+
+ - trace(<synthetic_event_name>,param list) - generate synthetic event
+ - save(field,...) - save current event fields
+ - snapshot() - snapshot the trace buffer
+
+The following commonly-used handler.action pairs are available:
+
+ - onmatch(matching.event).trace(<synthetic_event_name>,param list)
+
+ The 'onmatch(matching.event).trace(<synthetic_event_name>,param
+ list)' hist trigger action is invoked whenever an event matches
+ and the histogram entry would be added or updated. It causes the
+ named synthetic event to be generated with the values given in the
'param list'. The result is the generation of a synthetic event
that consists of the values contained in those variables at the
- time the invoking event was hit.
-
- The 'param list' consists of one or more parameters which may be
- either variables or fields defined on either the 'matching.event'
- or the target event. The variables or fields specified in the
- param list may be either fully-qualified or unqualified. If a
- variable is specified as unqualified, it must be unique between
- the two events. A field name used as a param can be unqualified
- if it refers to the target event, but must be fully qualified if
- it refers to the matching event. A fully-qualified name is of the
- form 'system.event_name.$var_name' or 'system.event_name.field'.
+ time the invoking event was hit. For example, if the synthetic
+ event name is 'wakeup_latency', a wakeup_latency event is
+ generated using onmatch(event).trace(wakeup_latency,arg1,arg2).
+
+ There is also an equivalent alternative form available for
+ generating synthetic events. In this form, the synthetic event
+ name is used as if it were a function name. For example, using
+ the 'wakeup_latency' synthetic event name again, the
+ wakeup_latency event would be generated by invoking it as if it
+ were a function call, with the event field values passed in as
+ arguments: onmatch(event).wakeup_latency(arg1,arg2). The syntax
+ for this form is:
+
+ onmatch(matching.event).<synthetic_event_name>(param list)
+
+ In either case, the 'param list' consists of one or more
+ parameters which may be either variables or fields defined on
+ either the 'matching.event' or the target event. The variables or
+ fields specified in the param list may be either fully-qualified
+ or unqualified. If a variable is specified as unqualified, it
+ must be unique between the two events. A field name used as a
+ param can be unqualified if it refers to the target event, but
+ must be fully qualified if it refers to the matching event. A
+ fully-qualified name is of the form 'system.event_name.$var_name'
+ or 'system.event_name.field'.
The 'matching.event' specification is simply the fully qualified
event name of the event that matches the target event for the
@@ -1896,6 +1942,12 @@ hist trigger specification.
wakeup_new_test($testpid) if comm=="cyclictest"' >> \
/sys/kernel/debug/tracing/events/sched/sched_wakeup_new/trigger
+ Or, equivalently, using the 'trace' keyword syntax:
+
+ # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\
+ trace(wakeup_new_test,$testpid) if comm=="cyclictest"' >> \
+ /sys/kernel/debug/tracing/events/sched/sched_wakeup_new/trigger
+
Creating and displaying a histogram based on those events is now
just a matter of using the fields and new synthetic event in the
tracing/events/synthetic directory, as usual::
@@ -2000,6 +2052,212 @@ hist trigger specification.
Entries: 2
Dropped: 0
+ - onmax(var).snapshot()
+
+ The 'onmax(var).snapshot()' hist trigger action is invoked
+ whenever the value of 'var' associated with a histogram entry
+ exceeds the current maximum contained in that variable.
+
+ The end result is that a global snapshot of the trace buffer will
+ be saved in the tracing/snapshot file if 'var' exceeds the current
+ maximum for any hist trigger entry.
+
+ Note that in this case the maximum is a global maximum for the
+ current trace instance, which is the maximum across all buckets of
+ the histogram. The key of the specific trace event that caused
+ the global maximum and the global maximum itself are displayed,
+ along with a message stating that a snapshot has been taken and
+ where to find it. The user can use the key information displayed
+ to locate the corresponding bucket in the histogram for even more
+ detail.
+
+ As an example the below defines a couple of hist triggers, one for
+ sched_waking and another for sched_switch, keyed on pid. Whenever
+ a sched_waking event occurs, the timestamp is saved in the entry
+ corresponding to the current pid, and when the scheduler switches
+ back to that pid, the timestamp difference is calculated. If the
+ resulting latency, stored in wakeup_lat, exceeds the current
+ maximum latency, a snapshot is taken. As part of the setup, all
+ the scheduler events are also enabled, which are the events that
+ will show up in the snapshot when it is taken at some point:
+
+ # echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+
+ # echo 'hist:keys=pid:ts0=common_timestamp.usecs \
+ if comm=="cyclictest"' >> \
+ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
+
+ # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \
+ onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio, \
+ prev_comm):onmax($wakeup_lat).snapshot() \
+ if next_comm=="cyclictest"' >> \
+ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
+
+ When the histogram is displayed, for each bucket the max value
+ and the saved values corresponding to the max are displayed
+ following the rest of the fields.
+
+ If a snaphot was taken, there is also a message indicating that,
+ along with the value and event that triggered the global maximum:
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
+ { next_pid: 2101 } hitcount: 200
+ max: 52 next_prio: 120 next_comm: cyclictest \
+ prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
+
+ { next_pid: 2103 } hitcount: 1326
+ max: 572 next_prio: 19 next_comm: cyclictest \
+ prev_pid: 0 prev_prio: 120 prev_comm: swapper/1
+
+ { next_pid: 2102 } hitcount: 1982 \
+ max: 74 next_prio: 19 next_comm: cyclictest \
+ prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
+
+ Snapshot taken (see tracing/snapshot). Details:
+ triggering value { onmax($wakeup_lat) }: 572 \
+ triggered by event with key: { next_pid: 2103 }
+
+ Totals:
+ Hits: 3508
+ Entries: 3
+ Dropped: 0
+
+ In the above case, the event that triggered the global maximum has
+ the key with next_pid == 2103. If you look at the bucket that has
+ 2103 as the key, you'll find the additional values save()'d along
+ with the local maximum for that bucket, which should be the same
+ as the global maximum (since that was the same value that
+ triggered the global snapshot).
+
+ And finally, looking at the snapshot data should show at or near
+ the end the event that triggered the snapshot (in this case you
+ can verify the timestamps between the sched_waking and
+ sched_switch events, which should match the time displayed in the
+ global maximum):
+
+ # cat /sys/kernel/debug/tracing/snapshot
+
+ <...>-2103 [005] d..3 309.873125: sched_switch: prev_comm=cyclictest prev_pid=2103 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120
+ <idle>-0 [005] d.h3 309.873611: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005
+ <idle>-0 [005] dNh4 309.873613: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005
+ <idle>-0 [005] d..3 309.873616: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19
+ <...>-2102 [005] d..3 309.873625: sched_switch: prev_comm=cyclictest prev_pid=2102 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120
+ <idle>-0 [005] d.h3 309.874624: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005
+ <idle>-0 [005] dNh4 309.874626: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005
+ <idle>-0 [005] dNh3 309.874628: sched_waking: comm=cyclictest pid=2103 prio=19 target_cpu=005
+ <idle>-0 [005] dNh4 309.874630: sched_wakeup: comm=cyclictest pid=2103 prio=19 target_cpu=005
+ <idle>-0 [005] d..3 309.874633: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19
+ <idle>-0 [004] d.h3 309.874757: sched_waking: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004
+ <idle>-0 [004] dNh4 309.874762: sched_wakeup: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004
+ <idle>-0 [004] d..3 309.874766: sched_switch: prev_comm=swapper/4 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=gnome-terminal- next_pid=1699 next_prio=120
+ gnome-terminal--1699 [004] d.h2 309.874941: sched_stat_runtime: comm=gnome-terminal- pid=1699 runtime=180706 [ns] vruntime=1126870572 [ns]
+ <idle>-0 [003] d.s4 309.874956: sched_waking: comm=rcu_sched pid=9 prio=120 target_cpu=007
+ <idle>-0 [003] d.s5 309.874960: sched_wake_idle_without_ipi: cpu=7
+ <idle>-0 [003] d.s5 309.874961: sched_wakeup: comm=rcu_sched pid=9 prio=120 target_cpu=007
+ <idle>-0 [007] d..3 309.874963: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=rcu_sched next_pid=9 next_prio=120
+ rcu_sched-9 [007] d..3 309.874973: sched_stat_runtime: comm=rcu_sched pid=9 runtime=13646 [ns] vruntime=22531430286 [ns]
+ rcu_sched-9 [007] d..3 309.874978: sched_switch: prev_comm=rcu_sched prev_pid=9 prev_prio=120 prev_state=R+ ==> next_comm=swapper/7 next_pid=0 next_prio=120
+ <...>-2102 [005] d..4 309.874994: sched_migrate_task: comm=cyclictest pid=2103 prio=19 orig_cpu=5 dest_cpu=1
+ <...>-2102 [005] d..4 309.875185: sched_wake_idle_without_ipi: cpu=1
+ <idle>-0 [001] d..3 309.875200: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2103 next_prio=19
+
+ - onchange(var).save(field,.. .)
+
+ The 'onchange(var).save(field,...)' hist trigger action is invoked
+ whenever the value of 'var' associated with a histogram entry
+ changes.
+
+ The end result is that the trace event fields specified as the
+ onchange.save() params will be saved if 'var' changes for that
+ hist trigger entry. This allows context from the event that
+ changed the value to be saved for later reference. When the
+ histogram is displayed, additional fields displaying the saved
+ values will be printed.
+
+ - onchange(var).snapshot()
+
+ The 'onchange(var).snapshot()' hist trigger action is invoked
+ whenever the value of 'var' associated with a histogram entry
+ changes.
+
+ The end result is that a global snapshot of the trace buffer will
+ be saved in the tracing/snapshot file if 'var' changes for any
+ hist trigger entry.
+
+ Note that in this case the changed value is a global variable
+ associated withe current trace instance. The key of the specific
+ trace event that caused the value to change and the global value
+ itself are displayed, along with a message stating that a snapshot
+ has been taken and where to find it. The user can use the key
+ information displayed to locate the corresponding bucket in the
+ histogram for even more detail.
+
+ As an example the below defines a hist trigger on the tcp_probe
+ event, keyed on dport. Whenever a tcp_probe event occurs, the
+ cwnd field is checked against the current value stored in the
+ $cwnd variable. If the value has changed, a snapshot is taken.
+ As part of the setup, all the scheduler and tcp events are also
+ enabled, which are the events that will show up in the snapshot
+ when it is taken at some point:
+
+ # echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+ # echo 1 > /sys/kernel/debug/tracing/events/tcp/enable
+
+ # echo 'hist:keys=dport:cwnd=snd_cwnd: \
+ onchange($cwnd).save(snd_wnd,srtt,rcv_wnd): \
+ onchange($cwnd).snapshot()' >> \
+ /sys/kernel/debug/tracing/events/tcp/tcp_probe/trigger
+
+ When the histogram is displayed, for each bucket the tracked value
+ and the saved values corresponding to that value are displayed
+ following the rest of the fields.
+
+ If a snaphot was taken, there is also a message indicating that,
+ along with the value and event that triggered the snapshot:
+
+ # cat /sys/kernel/debug/tracing/events/tcp/tcp_probe/hist
+ { dport: 1521 } hitcount: 8
+ changed: 10 snd_wnd: 35456 srtt: 154262 rcv_wnd: 42112
+
+ { dport: 80 } hitcount: 23
+ changed: 10 snd_wnd: 28960 srtt: 19604 rcv_wnd: 29312
+
+ { dport: 9001 } hitcount: 172
+ changed: 10 snd_wnd: 48384 srtt: 260444 rcv_wnd: 55168
+
+ { dport: 443 } hitcount: 211
+ changed: 10 snd_wnd: 26960 srtt: 17379 rcv_wnd: 28800
+
+ Snapshot taken (see tracing/snapshot). Details:
+ triggering value { onchange($cwnd) }: 10
+ triggered by event with key: { dport: 80 }
+
+ Totals:
+ Hits: 414
+ Entries: 4
+ Dropped: 0
+
+ In the above case, the event that triggered the snapshot has the
+ key with dport == 80. If you look at the bucket that has 80 as
+ the key, you'll find the additional values save()'d along with the
+ changed value for that bucket, which should be the same as the
+ global changed value (since that was the same value that triggered
+ the global snapshot).
+
+ And finally, looking at the snapshot data should show at or near
+ the end the event that triggered the snapshot:
+
+ # cat /sys/kernel/debug/tracing/snapshot
+
+ gnome-shell-1261 [006] dN.3 49.823113: sched_stat_runtime: comm=gnome-shell pid=1261 runtime=49347 [ns] vruntime=1835730389 [ns]
+ kworker/u16:4-773 [003] d..3 49.823114: sched_switch: prev_comm=kworker/u16:4 prev_pid=773 prev_prio=120 prev_state=R+ ==> next_comm=kworker/3:2 next_pid=135 next_prio=120
+ gnome-shell-1261 [006] d..3 49.823114: sched_switch: prev_comm=gnome-shell prev_pid=1261 prev_prio=120 prev_state=R+ ==> next_comm=kworker/6:2 next_pid=387 next_prio=120
+ kworker/3:2-135 [003] d..3 49.823118: sched_stat_runtime: comm=kworker/3:2 pid=135 runtime=5339 [ns] vruntime=17815800388 [ns]
+ kworker/6:2-387 [006] d..3 49.823120: sched_stat_runtime: comm=kworker/6:2 pid=387 runtime=9594 [ns] vruntime=14589605367 [ns]
+ kworker/6:2-387 [006] d..3 49.823122: sched_switch: prev_comm=kworker/6:2 prev_pid=387 prev_prio=120 prev_state=R+ ==> next_comm=gnome-shell next_pid=1261 next_prio=120
+ kworker/3:2-135 [003] d..3 49.823123: sched_switch: prev_comm=kworker/3:2 prev_pid=135 prev_prio=120 prev_state=T ==> next_comm=swapper/3 next_pid=0 next_prio=120
+ <idle>-0 [004] ..s7 49.823798: tcp_probe: src=10.0.0.10:54326 dest=23.215.104.193:80 mark=0x0 length=32 snd_nxt=0xe3ae2ff5 snd_una=0xe3ae2ecd snd_cwnd=10 ssthresh=2147483647 snd_wnd=28960 srtt=19604 rcv_wnd=29312
+
3. User space creating a trigger
--------------------------------