summaryrefslogtreecommitdiffstats
path: root/Documentation/sound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/alsa-configuration.rst2
-rw-r--r--Documentation/sound/kernel-api/writing-an-alsa-driver.rst16
2 files changed, 9 insertions, 9 deletions
diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index fe52c314b763..b36af65a08ed 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -1501,7 +1501,7 @@ Module for Digigram miXart8 sound cards.
This module supports multiple cards.
Note: One miXart8 board will be represented as 4 alsa cards.
-See MIXART.txt for details.
+See Documentation/sound/cards/mixart.rst for details.
When the driver is compiled as a module and the hotplug firmware
is supported, the firmware data is loaded via hotplug automatically.
diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index 73bbd59afc33..e6365836fa8b 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -71,7 +71,7 @@ core/oss
The codes for PCM and mixer OSS emulation modules are stored in this
directory. The rawmidi OSS emulation is included in the ALSA rawmidi
code since it's quite small. The sequencer code is stored in
-``core/seq/oss`` directory (see `below <#core-seq-oss>`__).
+``core/seq/oss`` directory (see `below <core/seq/oss_>`__).
core/seq
~~~~~~~~
@@ -382,7 +382,7 @@ where ``enable[dev]`` is the module option.
Each time the ``probe`` callback is called, check the availability of
the device. If not available, simply increment the device index and
returns. dev will be incremented also later (`step 7
-<#set-the-pci-driver-data-and-return-zero>`__).
+<7) Set the PCI driver data and return zero._>`__).
2) Create a card instance
~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -450,10 +450,10 @@ field contains the information shown in ``/proc/asound/cards``.
5) Create other components, such as mixer, MIDI, etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Here you define the basic components such as `PCM <#PCM-Interface>`__,
-mixer (e.g. `AC97 <#API-for-AC97-Codec>`__), MIDI (e.g.
-`MPU-401 <#MIDI-MPU401-UART-Interface>`__), and other interfaces.
-Also, if you want a `proc file <#Proc-Interface>`__, define it here,
+Here you define the basic components such as `PCM <PCM Interface_>`__,
+mixer (e.g. `AC97 <API for AC97 Codec_>`__), MIDI (e.g.
+`MPU-401 <MIDI (MPU401-UART) Interface_>`__), and other interfaces.
+Also, if you want a `proc file <Proc Interface_>`__, define it here,
too.
6) Register the card instance.
@@ -941,7 +941,7 @@ The allocation of an interrupt source is done like this:
chip->irq = pci->irq;
where :c:func:`snd_mychip_interrupt()` is the interrupt handler
-defined `later <#pcm-interface-interrupt-handler>`__. Note that
+defined `later <PCM Interrupt Handler_>`__. Note that
``chip->irq`` should be defined only when :c:func:`request_irq()`
succeeded.
@@ -3104,7 +3104,7 @@ processing the output stream in the irq handler.
If the MPU-401 interface shares its interrupt with the other logical
devices on the card, set ``MPU401_INFO_IRQ_HOOK`` (see
-`below <#MIDI-Interrupt-Handler>`__).
+`below <MIDI Interrupt Handler_>`__).
Usually, the port address corresponds to the command port and port + 1
corresponds to the data port. If not, you may change the ``cport``