summaryrefslogtreecommitdiffstats
path: root/Documentation/sound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/kernel-api/writing-an-alsa-driver.rst25
1 files changed, 8 insertions, 17 deletions
diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index b37234afdfa1..7c2f2032d30a 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3924,15 +3924,12 @@ The scheme of the real suspend job is as follows.
2. Call :c:func:`snd_power_change_state()` with
``SNDRV_CTL_POWER_D3hot`` to change the power status.
-3. Call :c:func:`snd_pcm_suspend_all()` to suspend the running
- PCM streams.
-
-4. If AC97 codecs are used, call :c:func:`snd_ac97_suspend()` for
+3. If AC97 codecs are used, call :c:func:`snd_ac97_suspend()` for
each codec.
-5. Save the register values if necessary.
+4. Save the register values if necessary.
-6. Stop the hardware if necessary.
+5. Stop the hardware if necessary.
A typical code would be like:
@@ -3946,12 +3943,10 @@ A typical code would be like:
/* (2) */
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
/* (3) */
- snd_pcm_suspend_all(chip->pcm);
- /* (4) */
snd_ac97_suspend(chip->ac97);
- /* (5) */
+ /* (4) */
snd_mychip_save_registers(chip);
- /* (6) */
+ /* (5) */
snd_mychip_stop_hardware(chip);
return 0;
}
@@ -3994,13 +3989,9 @@ A typical code would be like:
return 0;
}
-As shown in the above, it's better to save registers after suspending
-the PCM operations via :c:func:`snd_pcm_suspend_all()` or
-:c:func:`snd_pcm_suspend()`. It means that the PCM streams are
-already stopped when the register snapshot is taken. But, remember that
-you don't have to restart the PCM stream in the resume callback. It'll
-be restarted via trigger call with ``SNDRV_PCM_TRIGGER_RESUME`` when
-necessary.
+Note that, at the time this callback gets called, the PCM stream has
+been already suspended via its own PM ops calling
+:c:func:`snd_pcm_suspend_all()` internally.
OK, we have all callbacks now. Let's set them up. In the initialization
of the card, make sure that you can get the chip data from the card