summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi')
-rw-r--r--Documentation/scsi/g_NCR5380.txt17
-rw-r--r--Documentation/scsi/scsi-parameters.txt11
2 files changed, 15 insertions, 13 deletions
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
index 3b80f567f818..fd880150aeea 100644
--- a/Documentation/scsi/g_NCR5380.txt
+++ b/Documentation/scsi/g_NCR5380.txt
@@ -23,11 +23,10 @@ supported by the driver.
If the default configuration does not work for you, you can use the kernel
command lines (eg using the lilo append command):
- ncr5380=port,irq,dma
- ncr53c400=port,irq
-or
- ncr5380=base,irq,dma
- ncr53c400=base,irq
+ ncr5380=addr,irq
+ ncr53c400=addr,irq
+ ncr53c400a=addr,irq
+ dtc3181e=addr,irq
The driver does not probe for any addresses or ports other than those in
the OVERRIDE or given to the kernel as above.
@@ -36,19 +35,17 @@ This driver provides some information on what it has detected in
/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
time. More info to come in the future.
-When NCR53c400 support is compiled in, BIOS parameters will be returned by
-the driver (the raw 5380 driver does not and I don't plan to fiddle with
-it!).
-
This driver works as a module.
When included as a module, parameters can be passed on the insmod/modprobe
command line:
ncr_irq=xx the interrupt
ncr_addr=xx the port or base address (for port or memory
mapped, resp.)
- ncr_dma=xx the DMA
ncr_5380=1 to set up for a NCR5380 board
ncr_53c400=1 to set up for a NCR53C400 board
+ ncr_53c400a=1 to set up for a NCR53C400A board
+ dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
+ hp_c2502=1 to set up for a Hewlett Packard C2502 board
e.g.
modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
for a port mapped NCR5380 board or
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 2bfd6f6d2d3d..1241ac11edb1 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -27,13 +27,15 @@ parameters may be changed at runtime by the command
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
- atascsi= [HW,SCSI] Atari SCSI
+ atascsi= [HW,SCSI]
+ See drivers/scsi/atari_scsi.c.
BusLogic= [HW,SCSI]
See drivers/scsi/BusLogic.c, comment before function
BusLogic_ParseDriverOptions().
dtc3181e= [HW,SCSI]
+ See Documentation/scsi/g_NCR5380.txt.
eata= [HW,SCSI]
@@ -51,8 +53,8 @@ parameters may be changed at runtime by the command
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
- mac5380= [HW,SCSI] Format:
- <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+ mac5380= [HW,SCSI]
+ See drivers/scsi/mac_scsi.c.
max_luns= [SCSI] Maximum number of LUNs to probe.
Should be between 1 and 2^32-1.
@@ -65,10 +67,13 @@ parameters may be changed at runtime by the command
See header of drivers/scsi/NCR_D700.c.
ncr5380= [HW,SCSI]
+ See Documentation/scsi/g_NCR5380.txt.
ncr53c400= [HW,SCSI]
+ See Documentation/scsi/g_NCR5380.txt.
ncr53c400a= [HW,SCSI]
+ See Documentation/scsi/g_NCR5380.txt.
ncr53c406a= [HW,SCSI]