summaryrefslogtreecommitdiffstats
path: root/Documentation/power
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/power')
-rw-r--r--Documentation/power/00-INDEX6
-rw-r--r--Documentation/power/pm.txt257
-rw-r--r--Documentation/power/pm_qos_interface.txt59
-rw-r--r--Documentation/power/power_supply_class.txt169
4 files changed, 491 insertions, 0 deletions
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index 8db4e41a052d..a55d7f1c836d 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -14,6 +14,12 @@ notifiers.txt
- Registering suspend notifiers in device drivers
pci.txt
- How the PCI Subsystem Does Power Management
+pm.txt
+ - info on Linux power management support.
+pm_qos_interface.txt
+ - info on Linux PM Quality of Service interface
+power_supply_class.txt
+ - Tells userspace about battery, UPS, AC or DC power supply properties
s2ram.txt
- How to get suspend to ram working (and debug it when it isn't)
states.txt
diff --git a/Documentation/power/pm.txt b/Documentation/power/pm.txt
new file mode 100644
index 000000000000..be841507e43f
--- /dev/null
+++ b/Documentation/power/pm.txt
@@ -0,0 +1,257 @@
+ Linux Power Management Support
+
+This document briefly describes how to use power management with your
+Linux system and how to add power management support to Linux drivers.
+
+APM or ACPI?
+------------
+If you have a relatively recent x86 mobile, desktop, or server system,
+odds are it supports either Advanced Power Management (APM) or
+Advanced Configuration and Power Interface (ACPI). ACPI is the newer
+of the two technologies and puts power management in the hands of the
+operating system, allowing for more intelligent power management than
+is possible with BIOS controlled APM.
+
+The best way to determine which, if either, your system supports is to
+build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
+enabled by default). If a working ACPI implementation is found, the
+ACPI driver will override and disable APM, otherwise the APM driver
+will be used.
+
+No, sorry, you cannot have both ACPI and APM enabled and running at
+once. Some people with broken ACPI or broken APM implementations
+would like to use both to get a full set of working features, but you
+simply cannot mix and match the two. Only one power management
+interface can be in control of the machine at once. Think about it..
+
+User-space Daemons
+------------------
+Both APM and ACPI rely on user-space daemons, apmd and acpid
+respectively, to be completely functional. Obtain both of these
+daemons from your Linux distribution or from the Internet (see below)
+and be sure that they are started sometime in the system boot process.
+Go ahead and start both. If ACPI or APM is not available on your
+system the associated daemon will exit gracefully.
+
+ apmd: http://worldvisions.ca/~apenwarr/apmd/
+ acpid: http://acpid.sf.net/
+
+Driver Interface -- OBSOLETE, DO NOT USE!
+----------------*************************
+
+Note: pm_register(), pm_access(), pm_dev_idle() and friends are
+obsolete. Please do not use them. Instead you should properly hook
+your driver into the driver model, and use its suspend()/resume()
+callbacks to do this kind of stuff.
+
+If you are writing a new driver or maintaining an old driver, it
+should include power management support. Without power management
+support, a single driver may prevent a system with power management
+capabilities from ever being able to suspend (safely).
+
+Overview:
+1) Register each instance of a device with "pm_register"
+2) Call "pm_access" before accessing the hardware.
+ (this will ensure that the hardware is awake and ready)
+3) Your "pm_callback" is called before going into a
+ suspend state (ACPI D1-D3) or after resuming (ACPI D0)
+ from a suspend.
+4) Call "pm_dev_idle" when the device is not being used
+ (optional but will improve device idle detection)
+5) When unloaded, unregister the device with "pm_unregister"
+
+/*
+ * Description: Register a device with the power-management subsystem
+ *
+ * Parameters:
+ * type - device type (PCI device, system device, ...)
+ * id - instance number or unique identifier
+ * cback - request handler callback (suspend, resume, ...)
+ *
+ * Returns: Registered PM device or NULL on error
+ *
+ * Examples:
+ * dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
+ *
+ * struct pci_dev *pci_dev = pci_find_dev(...);
+ * dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
+ */
+struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
+
+/*
+ * Description: Unregister a device with the power management subsystem
+ *
+ * Parameters:
+ * dev - PM device previously returned from pm_register
+ */
+void pm_unregister(struct pm_dev *dev);
+
+/*
+ * Description: Unregister all devices with a matching callback function
+ *
+ * Parameters:
+ * cback - previously registered request callback
+ *
+ * Notes: Provided for easier porting from old APM interface
+ */
+void pm_unregister_all(pm_callback cback);
+
+/*
+ * Power management request callback
+ *
+ * Parameters:
+ * dev - PM device previously returned from pm_register
+ * rqst - request type
+ * data - data, if any, associated with the request
+ *
+ * Returns: 0 if the request is successful
+ * EINVAL if the request is not supported
+ * EBUSY if the device is now busy and cannot handle the request
+ * ENOMEM if the device was unable to handle the request due to memory
+ *
+ * Details: The device request callback will be called before the
+ * device/system enters a suspend state (ACPI D1-D3) or
+ * or after the device/system resumes from suspend (ACPI D0).
+ * For PM_SUSPEND, the ACPI D-state being entered is passed
+ * as the "data" argument to the callback. The device
+ * driver should save (PM_SUSPEND) or restore (PM_RESUME)
+ * device context when the request callback is called.
+ *
+ * Once a driver returns 0 (success) from a suspend
+ * request, it should not process any further requests or
+ * access the device hardware until a call to "pm_access" is made.
+ */
+typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+Driver Details
+--------------
+This is just a quick Q&A as a stopgap until a real driver writers'
+power management guide is available.
+
+Q: When is a device suspended?
+
+Devices can be suspended based on direct user request (eg. laptop lid
+closes), system power policy (eg. sleep after 30 minutes of console
+inactivity), or device power policy (eg. power down device after 5
+minutes of inactivity)
+
+Q: Must a driver honor a suspend request?
+
+No, a driver can return -EBUSY from a suspend request and this
+will stop the system from suspending. When a suspend request
+fails, all suspended devices are resumed and the system continues
+to run. Suspend can be retried at a later time.
+
+Q: Can the driver block suspend/resume requests?
+
+Yes, a driver can delay its return from a suspend or resume
+request until the device is ready to handle requests. It
+is advantageous to return as quickly as possible from a
+request as suspend/resume are done serially.
+
+Q: What context is a suspend/resume initiated from?
+
+A suspend or resume is initiated from a kernel thread context.
+It is safe to block, allocate memory, initiate requests
+or anything else you can do within the kernel.
+
+Q: Will requests continue to arrive after a suspend?
+
+Possibly. It is the driver's responsibility to queue(*),
+fail, or drop any requests that arrive after returning
+success to a suspend request. It is important that the
+driver not access its device until after it receives
+a resume request as the device's bus may no longer
+be active.
+
+(*) If a driver queues requests for processing after
+ resume be aware that the device, network, etc.
+ might be in a different state than at suspend time.
+ It's probably better to drop requests unless
+ the driver is a storage device.
+
+Q: Do I have to manage bus-specific power management registers
+
+No. It is the responsibility of the bus driver to manage
+PCI, USB, etc. power management registers. The bus driver
+or the power management subsystem will also enable any
+wake-on functionality that the device has.
+
+Q: So, really, what do I need to do to support suspend/resume?
+
+You need to save any device context that would
+be lost if the device was powered off and then restore
+it at resume time. When ACPI is active, there are
+three levels of device suspend states; D1, D2, and D3.
+(The suspend state is passed as the "data" argument
+to the device callback.) With D3, the device is powered
+off and loses all context, D1 and D2 are shallower power
+states and require less device context to be saved. To
+play it safe, just save everything at suspend and restore
+everything at resume.
+
+Q: Where do I store device context for suspend?
+
+Anywhere in memory, kmalloc a buffer or store it
+in the device descriptor. You are guaranteed that the
+contents of memory will be restored and accessible
+before resume, even when the system suspends to disk.
+
+Q: What do I need to do for ACPI vs. APM vs. etc?
+
+Drivers need not be aware of the specific power management
+technology that is active. They just need to be aware
+of when the overlying power management system requests
+that they suspend or resume.
+
+Q: What about device dependencies?
+
+When a driver registers a device, the power management
+subsystem uses the information provided to build a
+tree of device dependencies (eg. USB device X is on
+USB controller Y which is on PCI bus Z) When power
+management wants to suspend a device, it first sends
+a suspend request to its driver, then the bus driver,
+and so on up to the system bus. Device resumes
+proceed in the opposite direction.
+
+Q: Who do I contact for additional information about
+ enabling power management for my specific driver/device?
+
+ACPI Development mailing list: linux-acpi@vger.kernel.org
+
+System Interface -- OBSOLETE, DO NOT USE!
+----------------*************************
+If you are providing new power management support to Linux (ie.
+adding support for something like APM or ACPI), you should
+communicate with drivers through the existing generic power
+management interface.
+
+/*
+ * Send a request to all devices
+ *
+ * Parameters:
+ * rqst - request type
+ * data - data, if any, associated with the request
+ *
+ * Returns: 0 if the request is successful
+ * See "pm_callback" return for errors
+ *
+ * Details: Walk list of registered devices and call pm_send
+ * for each until complete or an error is encountered.
+ * If an error is encountered for a suspend request,
+ * return all devices to the state they were in before
+ * the suspend request.
+ */
+int pm_send_all(pm_request_t rqst, void *data);
+
+/*
+ * Find a matching device
+ *
+ * Parameters:
+ * type - device type (PCI device, system device, or 0 to match all devices)
+ * from - previous match or NULL to start from the beginning
+ *
+ * Returns: Matching device or NULL if none found
+ */
+struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
new file mode 100644
index 000000000000..49adb1a33514
--- /dev/null
+++ b/Documentation/power/pm_qos_interface.txt
@@ -0,0 +1,59 @@
+PM quality of Service interface.
+
+This interface provides a kernel and user mode interface for registering
+performance expectations by drivers, subsystems and user space applications on
+one of the parameters.
+
+Currently we have {cpu_dma_latency, network_latency, network_throughput} as the
+initial set of pm_qos parameters.
+
+The infrastructure exposes multiple misc device nodes one per implemented
+parameter. The set of parameters implement is defined by pm_qos_power_init()
+and pm_qos_params.h. This is done because having the available parameters
+being runtime configurable or changeable from a driver was seen as too easy to
+abuse.
+
+For each parameter a list of performance requirements is maintained along with
+an aggregated target value. The aggregated target value is updated with
+changes to the requirement list or elements of the list. Typically the
+aggregated target value is simply the max or min of the requirement values held
+in the parameter list elements.
+
+From kernel mode the use of this interface is simple:
+pm_qos_add_requirement(param_id, name, target_value):
+Will insert a named element in the list for that identified PM_QOS parameter
+with the target value. Upon change to this list the new target is recomputed
+and any registered notifiers are called only if the target value is now
+different.
+
+pm_qos_update_requirement(param_id, name, new_target_value):
+Will search the list identified by the param_id for the named list element and
+then update its target value, calling the notification tree if the aggregated
+target is changed. with that name is already registered.
+
+pm_qos_remove_requirement(param_id, name):
+Will search the identified list for the named element and remove it, after
+removal it will update the aggregate target and call the notification tree if
+the target was changed as a result of removing the named requirement.
+
+
+From user mode:
+Only processes can register a pm_qos requirement. To provide for automatic
+cleanup for process the interface requires the process to register its
+parameter requirements in the following way:
+
+To register the default pm_qos target for the specific parameter, the process
+must open one of /dev/[cpu_dma_latency, network_latency, network_throughput]
+
+As long as the device node is held open that process has a registered
+requirement on the parameter. The name of the requirement is "process_<PID>"
+derived from the current->pid from within the open system call.
+
+To change the requested target value the process needs to write a s32 value to
+the open device node. This translates to a pm_qos_update_requirement call.
+
+To remove the user mode request for a target value simply close the device
+node.
+
+
+
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
new file mode 100644
index 000000000000..a8686e5a6857
--- /dev/null
+++ b/Documentation/power/power_supply_class.txt
@@ -0,0 +1,169 @@
+Linux power supply class
+========================
+
+Synopsis
+~~~~~~~~
+Power supply class used to represent battery, UPS, AC or DC power supply
+properties to user-space.
+
+It defines core set of attributes, which should be applicable to (almost)
+every power supply out there. Attributes are available via sysfs and uevent
+interfaces.
+
+Each attribute has well defined meaning, up to unit of measure used. While
+the attributes provided are believed to be universally applicable to any
+power supply, specific monitoring hardware may not be able to provide them
+all, so any of them may be skipped.
+
+Power supply class is extensible, and allows to define drivers own attributes.
+The core attribute set is subject to the standard Linux evolution (i.e.
+if it will be found that some attribute is applicable to many power supply
+types or their drivers, it can be added to the core set).
+
+It also integrates with LED framework, for the purpose of providing
+typically expected feedback of battery charging/fully charged status and
+AC/USB power supply online status. (Note that specific details of the
+indication (including whether to use it at all) are fully controllable by
+user and/or specific machine defaults, per design principles of LED
+framework).
+
+
+Attributes/properties
+~~~~~~~~~~~~~~~~~~~~~
+Power supply class has predefined set of attributes, this eliminates code
+duplication across drivers. Power supply class insist on reusing its
+predefined attributes *and* their units.
+
+So, userspace gets predictable set of attributes and their units for any
+kind of power supply, and can process/present them to a user in consistent
+manner. Results for different power supplies and machines are also directly
+comparable.
+
+See drivers/power/ds2760_battery.c and drivers/power/pda_power.c for the
+example how to declare and handle attributes.
+
+
+Units
+~~~~~
+Quoting include/linux/power_supply.h:
+
+ All voltages, currents, charges, energies, time and temperatures in µV,
+ µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
+ stated. It's driver's job to convert its raw values to units in which
+ this class operates.
+
+
+Attributes/properties detailed
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+~ ~ ~ ~ ~ ~ ~ Charge/Energy/Capacity - how to not confuse ~ ~ ~ ~ ~ ~ ~
+~ ~
+~ Because both "charge" (µAh) and "energy" (µWh) represents "capacity" ~
+~ of battery, this class distinguish these terms. Don't mix them! ~
+~ ~
+~ CHARGE_* attributes represents capacity in µAh only. ~
+~ ENERGY_* attributes represents capacity in µWh only. ~
+~ CAPACITY attribute represents capacity in *percents*, from 0 to 100. ~
+~ ~
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+
+Postfixes:
+_AVG - *hardware* averaged value, use it if your hardware is really able to
+report averaged values.
+_NOW - momentary/instantaneous values.
+
+STATUS - this attribute represents operating status (charging, full,
+discharging (i.e. powering a load), etc.). This corresponds to
+BATTERY_STATUS_* values, as defined in battery.h.
+
+HEALTH - represents health of the battery, values corresponds to
+POWER_SUPPLY_HEALTH_*, defined in battery.h.
+
+VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN - design values for maximal and
+minimal power supply voltages. Maximal/minimal means values of voltages
+when battery considered "full"/"empty" at normal conditions. Yes, there is
+no direct relation between voltage and battery capacity, but some dumb
+batteries use voltage for very approximated calculation of capacity.
+Battery driver also can use this attribute just to inform userspace
+about maximal and minimal voltage thresholds of a given battery.
+
+VOLTAGE_MAX, VOLTAGE_MIN - same as _DESIGN voltage values except that
+these ones should be used if hardware could only guess (measure and
+retain) the thresholds of a given power supply.
+
+CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when
+battery considered full/empty.
+
+ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN - same as above but for energy.
+
+CHARGE_FULL, CHARGE_EMPTY - These attributes means "last remembered value
+of charge when battery became full/empty". It also could mean "value of
+charge when battery considered full/empty at given conditions (temperature,
+age)". I.e. these attributes represents real thresholds, not design values.
+
+ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
+
+CAPACITY - capacity in percents.
+
+TEMP - temperature of the power supply.
+TEMP_AMBIENT - ambient temperature.
+
+TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
+while battery powers a load)
+TIME_TO_FULL - seconds left for battery to be considered full (i.e.
+while battery is charging)
+
+
+Battery <-> external power supply interaction
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Often power supplies are acting as supplies and supplicants at the same
+time. Batteries are good example. So, batteries usually care if they're
+externally powered or not.
+
+For that case, power supply class implements notification mechanism for
+batteries.
+
+External power supply (AC) lists supplicants (batteries) names in
+"supplied_to" struct member, and each power_supply_changed() call
+issued by external power supply will notify supplicants via
+external_power_changed callback.
+
+
+QA
+~~
+Q: Where is POWER_SUPPLY_PROP_XYZ attribute?
+A: If you cannot find attribute suitable for your driver needs, feel free
+ to add it and send patch along with your driver.
+
+ The attributes available currently are the ones currently provided by the
+ drivers written.
+
+ Good candidates to add in future: model/part#, cycle_time, manufacturer,
+ etc.
+
+
+Q: I have some very specific attribute (e.g. battery color), should I add
+ this attribute to standard ones?
+A: Most likely, no. Such attribute can be placed in the driver itself, if
+ it is useful. Of course, if the attribute in question applicable to
+ large set of batteries, provided by many drivers, and/or comes from
+ some general battery specification/standard, it may be a candidate to
+ be added to the core attribute set.
+
+
+Q: Suppose, my battery monitoring chip/firmware does not provides capacity
+ in percents, but provides charge_{now,full,empty}. Should I calculate
+ percentage capacity manually, inside the driver, and register CAPACITY
+ attribute? The same question about time_to_empty/time_to_full.
+A: Most likely, no. This class is designed to export properties which are
+ directly measurable by the specific hardware available.
+
+ Inferring not available properties using some heuristics or mathematical
+ model is not subject of work for a battery driver. Such functionality
+ should be factored out, and in fact, apm_power, the driver to serve
+ legacy APM API on top of power supply class, uses a simple heuristic of
+ approximating remaining battery capacity based on its charge, current,
+ voltage and so on. But full-fledged battery model is likely not subject
+ for kernel at all, as it would require floating point calculation to deal
+ with things like differential equations and Kalman filters. This is
+ better be handled by batteryd/libbattery, yet to be written.