diff options
Diffstat (limited to 'Documentation/networking')
| -rw-r--r-- | Documentation/networking/af_xdp.rst | 8 | ||||
| -rw-r--r-- | Documentation/networking/ip-sysctl.txt | 16 | ||||
| -rw-r--r-- | Documentation/networking/rds.txt | 2 |
3 files changed, 21 insertions, 5 deletions
diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index e14d7d40fc75..50bccbf68308 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -316,16 +316,16 @@ A: When a netdev of a physical NIC is initialized, Linux usually all the traffic, you can force the netdev to only have 1 queue, queue id 0, and then bind to queue 0. You can use ethtool to do this:: - sudo ethtool -L <interface> combined 1 + sudo ethtool -L <interface> combined 1 If you want to only see part of the traffic, you can program the NIC through ethtool to filter out your traffic to a single queue id that you can bind your XDP socket to. Here is one example in which UDP traffic to and from port 4242 are sent to queue 2:: - sudo ethtool -N <interface> rx-flow-hash udp4 fn - sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \ - 4242 action 2 + sudo ethtool -N <interface> rx-flow-hash udp4 fn + sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \ + 4242 action 2 A number of other ways are possible all up to the capabilitites of the NIC you have. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 14fe93049d28..22f6b8b1110a 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -255,6 +255,14 @@ tcp_base_mss - INTEGER Path MTU discovery (MTU probing). If MTU probing is enabled, this is the initial MSS used by the connection. +tcp_min_snd_mss - INTEGER + TCP SYN and SYNACK messages usually advertise an ADVMSS option, + as described in RFC 1122 and RFC 6691. + If this ADVMSS option is smaller than tcp_min_snd_mss, + it is silently capped to tcp_min_snd_mss. + + Default : 48 (at least 8 bytes of payload per segment) + tcp_congestion_control - STRING Set the congestion control algorithm to be used for new connections. The algorithm "reno" is always available, but @@ -772,6 +780,14 @@ tcp_challenge_ack_limit - INTEGER in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) Default: 100 +tcp_rx_skb_cache - BOOLEAN + Controls a per TCP socket cache of one skb, that might help + performance of some workloads. This might be dangerous + on systems with a lot of TCP sockets, since it increases + memory usage. + + Default: 0 (disabled) + UDP variables: udp_l3mdev_accept - BOOLEAN diff --git a/Documentation/networking/rds.txt b/Documentation/networking/rds.txt index 0235ae69af2a..f2a0147c933d 100644 --- a/Documentation/networking/rds.txt +++ b/Documentation/networking/rds.txt @@ -389,7 +389,7 @@ Multipath RDS (mprds) a common (to all paths) part, and a per-path struct rds_conn_path. All I/O workqs and reconnect threads are driven from the rds_conn_path. Transports such as TCP that are multipath capable may then set up a - TPC socket per rds_conn_path, and this is managed by the transport via + TCP socket per rds_conn_path, and this is managed by the transport via the transport privatee cp_transport_data pointer. Transports announce themselves as multipath capable by setting the |