diff options
Diffstat (limited to 'Documentation/media')
38 files changed, 742 insertions, 1875 deletions
diff --git a/Documentation/media/audio.h.rst.exceptions b/Documentation/media/audio.h.rst.exceptions index f40f3cbfe4c9..940458774cf6 100644 --- a/Documentation/media/audio.h.rst.exceptions +++ b/Documentation/media/audio.h.rst.exceptions @@ -1,9 +1,6 @@ # Ignore header name ignore define _DVBAUDIO_H_ -# Typedef pointing to structs -replace typedef audio_karaoke_t :c:type:`audio_karaoke` - # Undocumented audio caps, as this is a deprecated API anyway ignore define AUDIO_CAP_DTS ignore define AUDIO_CAP_LPCM diff --git a/Documentation/media/media.h.rst.exceptions b/Documentation/media/media.h.rst.exceptions index 83d7f7c722fb..684fe9c86dee 100644 --- a/Documentation/media/media.h.rst.exceptions +++ b/Documentation/media/media.h.rst.exceptions @@ -6,10 +6,10 @@ ignore define MEDIA_API_VERSION ignore define MEDIA_ENT_F_BASE ignore define MEDIA_ENT_F_OLD_BASE ignore define MEDIA_ENT_F_OLD_SUBDEV_BASE +ignore define MEDIA_ENT_F_DTV_DECODER ignore define MEDIA_INTF_T_DVB_BASE ignore define MEDIA_INTF_T_V4L_BASE ignore define MEDIA_INTF_T_ALSA_BASE - #ignore legacy entity type macros ignore define MEDIA_ENT_TYPE_SHIFT ignore define MEDIA_ENT_TYPE_MASK diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index b6fd86424fbb..8d5633e6ae04 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -179,6 +179,24 @@ it is guaranteed that the state did change in between the two events. capability set. When open() is called, the HPD pin can be read and if the HPD is high, then an initial event will be generated for that filehandle. + * .. _`CEC-EVENT-PIN-5V-LOW`: + + - ``CEC_EVENT_PIN_5V_LOW`` + - 6 + - Generated if the 5V pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the 5V pin can be read and + if the 5V is low, then an initial event will be generated for that + filehandle. + * .. _`CEC-EVENT-PIN-5V-HIGH`: + + - ``CEC_EVENT_PIN_5V_HIGH`` + - 7 + - Generated if the 5V pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the 5V pin can be read and + if the 5V is high, then an initial event will be generated for that + filehandle. .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| diff --git a/Documentation/media/uapi/dvb/audio-get-pts.rst b/Documentation/media/uapi/dvb/audio-get-pts.rst deleted file mode 100644 index 2d1396b003de..000000000000 --- a/Documentation/media/uapi/dvb/audio-get-pts.rst +++ /dev/null @@ -1,65 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _AUDIO_GET_PTS: - -============= -AUDIO_GET_PTS -============= - -Name ----- - -AUDIO_GET_PTS - -.. attention:: This ioctl is deprecated - -Synopsis --------- - -.. c:function:: int ioctl(int fd, AUDIO_GET_PTS, __u64 *pts) - :name: AUDIO_GET_PTS - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - - - - int fd - - - File descriptor returned by a previous call to open(). - - - - - - __u64 \*pts - - - Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / - ISO/IEC 13818-1. - - The PTS should belong to the currently played frame if possible, - but may also be a value close to it like the PTS of the last - decoded frame or the last PTS extracted by the PES parser. - - -Description ------------ - -This ioctl is obsolete. Do not use in new drivers. If you need this -functionality, then please contact the linux-media mailing list -(`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__). - -This ioctl call asks the Audio Device to return the current PTS -timestamp. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-attributes.rst b/Documentation/media/uapi/dvb/audio-set-attributes.rst deleted file mode 100644 index f0c6153ca80f..000000000000 --- a/Documentation/media/uapi/dvb/audio-set-attributes.rst +++ /dev/null @@ -1,67 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _AUDIO_SET_ATTRIBUTES: - -==================== -AUDIO_SET_ATTRIBUTES -==================== - -Name ----- - -AUDIO_SET_ATTRIBUTES - -.. attention:: This ioctl is deprecated - - -Synopsis --------- - -.. c:function:: int ioctl(fd, AUDIO_SET_ATTRIBUTES, struct audio_attributes *attr ) - :name: AUDIO_SET_ATTRIBUTES - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - - - - int fd - - - File descriptor returned by a previous call to open(). - - - - - - audio_attributes_t attr - - - audio attributes according to section ?? - - -Description ------------ - -This ioctl is intended for DVD playback and allows you to set certain -information about the audio stream. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - attr is not a valid or supported attribute setting. diff --git a/Documentation/media/uapi/dvb/audio-set-ext-id.rst b/Documentation/media/uapi/dvb/audio-set-ext-id.rst deleted file mode 100644 index 8503c47f26bd..000000000000 --- a/Documentation/media/uapi/dvb/audio-set-ext-id.rst +++ /dev/null @@ -1,66 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _AUDIO_SET_EXT_ID: - -================ -AUDIO_SET_EXT_ID -================ - -Name ----- - -AUDIO_SET_EXT_ID - -.. attention:: This ioctl is deprecated - -Synopsis --------- - -.. c:function:: int ioctl(fd, AUDIO_SET_EXT_ID, int id) - :name: AUDIO_SET_EXT_ID - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - - - - int fd - - - File descriptor returned by a previous call to open(). - - - - - - int id - - - audio sub_stream_id - - -Description ------------ - -This ioctl can be used to set the extension id for MPEG streams in DVD -playback. Only the first 3 bits are recognized. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - id is not a valid id. diff --git a/Documentation/media/uapi/dvb/audio-set-karaoke.rst b/Documentation/media/uapi/dvb/audio-set-karaoke.rst deleted file mode 100644 index c759952d88aa..000000000000 --- a/Documentation/media/uapi/dvb/audio-set-karaoke.rst +++ /dev/null @@ -1,66 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _AUDIO_SET_KARAOKE: - -================= -AUDIO_SET_KARAOKE -================= - -Name ----- - -AUDIO_SET_KARAOKE - -.. attention:: This ioctl is deprecated - -Synopsis --------- - -.. c:function:: int ioctl(fd, AUDIO_SET_KARAOKE, struct audio_karaoke *karaoke) - :name: AUDIO_SET_KARAOKE - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - - - - int fd - - - File descriptor returned by a previous call to open(). - - - - - - audio_karaoke_t \*karaoke - - - karaoke settings according to section ??. - - -Description ------------ - -This ioctl allows one to set the mixer settings for a karaoke DVD. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - karaoke is not a valid or supported karaoke setting. diff --git a/Documentation/media/uapi/dvb/audio_data_types.rst b/Documentation/media/uapi/dvb/audio_data_types.rst index 6b93359d64f7..5bffa2c98a24 100644 --- a/Documentation/media/uapi/dvb/audio_data_types.rst +++ b/Documentation/media/uapi/dvb/audio_data_types.rst @@ -114,40 +114,3 @@ following bits set according to the hardwares capabilities. #define AUDIO_CAP_OGG 64 #define AUDIO_CAP_SDDS 128 #define AUDIO_CAP_AC3 256 - -.. c:type:: audio_karaoke - -The ioctl AUDIO_SET_KARAOKE uses the following format: - - -.. code-block:: c - - typedef - struct audio_karaoke { - int vocal1; - int vocal2; - int melody; - } audio_karaoke_t; - -If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t -at 70% each. If both, Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed -into the left channel and Vocal2 into the right channel at 100% each. Ff -Melody is non-zero, the melody channel gets mixed into left and right. - - -.. c:type:: audio_attributes - -The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES: - - -.. code-block:: c - - typedef uint16_t audio_attributes_t; - /* bits: descr. */ - /* 15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */ - /* 12 multichannel extension */ - /* 11-10 audio type (0=not spec, 1=language included) */ - /* 9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */ - /* 7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit, */ - /* 5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */ - /* 2- 0 number of audio channels (n+1 channels) */ diff --git a/Documentation/media/uapi/dvb/audio_function_calls.rst b/Documentation/media/uapi/dvb/audio_function_calls.rst index 0bb56f0cfed4..7dba16285dab 100644 --- a/Documentation/media/uapi/dvb/audio_function_calls.rst +++ b/Documentation/media/uapi/dvb/audio_function_calls.rst @@ -22,13 +22,9 @@ Audio Function Calls audio-set-bypass-mode audio-channel-select audio-bilingual-channel-select - audio-get-pts audio-get-status audio-get-capabilities audio-clear-buffer audio-set-id audio-set-mixer audio-set-streamtype - audio-set-ext-id - audio-set-attributes - audio-set-karaoke diff --git a/Documentation/media/uapi/dvb/video-get-frame-rate.rst b/Documentation/media/uapi/dvb/video-get-frame-rate.rst deleted file mode 100644 index 400042a854cf..000000000000 --- a/Documentation/media/uapi/dvb/video-get-frame-rate.rst +++ /dev/null @@ -1,61 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_GET_FRAME_RATE: - -==================== -VIDEO_GET_FRAME_RATE -==================== - -Name ----- - -VIDEO_GET_FRAME_RATE - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(int fd, VIDEO_GET_FRAME_RATE, unsigned int *rate) - :name: VIDEO_GET_FRAME_RATE - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_GET_FRAME_RATE for this command. - - - .. row 3 - - - unsigned int \*rate - - - Returns the framerate in number of frames per 1000 seconds. - - -Description ------------ - -This ioctl call asks the Video Device to return the current framerate. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-get-navi.rst b/Documentation/media/uapi/dvb/video-get-navi.rst deleted file mode 100644 index 114a9ac48b9e..000000000000 --- a/Documentation/media/uapi/dvb/video-get-navi.rst +++ /dev/null @@ -1,84 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_GET_NAVI: - -============== -VIDEO_GET_NAVI -============== - -Name ----- - -VIDEO_GET_NAVI - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(fd, VIDEO_GET_NAVI , struct video_navi_pack *navipack) - :name: VIDEO_GET_NAVI - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_GET_NAVI for this command. - - - .. row 3 - - - video_navi_pack_t \*navipack - - - PCI or DSI pack (private stream 2) according to section ??. - - -Description ------------ - -This ioctl returns navigational information from the DVD stream. This is -especially needed if an encoded stream has to be decoded by the -hardware. - -.. c:type:: video_navi_pack - -.. code-block::c - - typedef struct video_navi_pack { - int length; /* 0 ... 1024 */ - __u8 data[1024]; - } video_navi_pack_t; - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EFAULT`` - - - driver is not able to return navigational information diff --git a/Documentation/media/uapi/dvb/video-set-attributes.rst b/Documentation/media/uapi/dvb/video-set-attributes.rst deleted file mode 100644 index b2f11a6746e9..000000000000 --- a/Documentation/media/uapi/dvb/video-set-attributes.rst +++ /dev/null @@ -1,93 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_SET_ATTRIBUTES: - -==================== -VIDEO_SET_ATTRIBUTES -==================== - -Name ----- - -VIDEO_SET_ATTRIBUTES - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(fd, VIDEO_SET_ATTRIBUTE ,video_attributes_t vattr) - :name: VIDEO_SET_ATTRIBUTE - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_SET_ATTRIBUTE for this command. - - - .. row 3 - - - video_attributes_t vattr - - - video attributes according to section ??. - - -Description ------------ - -This ioctl is intended for DVD playback and allows you to set certain -information about the stream. Some hardware may not need this -information, but the call also tells the hardware to prepare for DVD -playback. - -.. c:type:: video_attributes_t - -.. code-block::c - - typedef __u16 video_attributes_t; - /* bits: descr. */ - /* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ - /* 13-12 TV system (0=525/60, 1=625/50) */ - /* 11-10 Aspect ratio (0=4:3, 3=16:9) */ - /* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ - /* 7 line 21-1 data present in GOP (1=yes, 0=no) */ - /* 6 line 21-2 data present in GOP (1=yes, 0=no) */ - /* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ - /* 2 source letterboxed (1=yes, 0=no) */ - /* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - input is not a valid attribute setting. diff --git a/Documentation/media/uapi/dvb/video-set-highlight.rst b/Documentation/media/uapi/dvb/video-set-highlight.rst deleted file mode 100644 index 90aeafd923b7..000000000000 --- a/Documentation/media/uapi/dvb/video-set-highlight.rst +++ /dev/null @@ -1,86 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_SET_HIGHLIGHT: - -=================== -VIDEO_SET_HIGHLIGHT -=================== - -Name ----- - -VIDEO_SET_HIGHLIGHT - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(fd, VIDEO_SET_HIGHLIGHT, struct video_highlight *vhilite) - :name: VIDEO_SET_HIGHLIGHT - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_SET_HIGHLIGHT for this command. - - - .. row 3 - - - video_highlight_t \*vhilite - - - SPU Highlight information according to section ??. - - -Description ------------ - -This ioctl sets the SPU highlight information for the menu access of a -DVD. - -.. c:type:: video_highlight - -.. code-block:: c - - typedef - struct video_highlight { - int active; /* 1=show highlight, 0=hide highlight */ - __u8 contrast1; /* 7- 4 Pattern pixel contrast */ - /* 3- 0 Background pixel contrast */ - __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */ - /* 3- 0 Emphasis pixel-1 contrast */ - __u8 color1; /* 7- 4 Pattern pixel color */ - /* 3- 0 Background pixel color */ - __u8 color2; /* 7- 4 Emphasis pixel-2 color */ - /* 3- 0 Emphasis pixel-1 color */ - __u32 ypos; /* 23-22 auto action mode */ - /* 21-12 start y */ - /* 9- 0 end y */ - __u32 xpos; /* 23-22 button color number */ - /* 21-12 start x */ - /* 9- 0 end x */ - } video_highlight_t; - - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-set-id.rst b/Documentation/media/uapi/dvb/video-set-id.rst deleted file mode 100644 index 18f66875ae3f..000000000000 --- a/Documentation/media/uapi/dvb/video-set-id.rst +++ /dev/null @@ -1,75 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_SET_ID: - -============ -VIDEO_SET_ID -============ - -Name ----- - -VIDEO_SET_ID - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(int fd, VIDEO_SET_ID, int id) - :name: VIDEO_SET_ID - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_SET_ID for this command. - - - .. row 3 - - - int id - - - video sub-stream id - - -Description ------------ - -This ioctl selects which sub-stream is to be decoded if a program or -system stream is sent to the video device. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - Invalid sub-stream id. diff --git a/Documentation/media/uapi/dvb/video-set-spu-palette.rst b/Documentation/media/uapi/dvb/video-set-spu-palette.rst deleted file mode 100644 index 51a1913d21d2..000000000000 --- a/Documentation/media/uapi/dvb/video-set-spu-palette.rst +++ /dev/null @@ -1,82 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_SET_SPU_PALETTE: - -===================== -VIDEO_SET_SPU_PALETTE -===================== - -Name ----- - -VIDEO_SET_SPU_PALETTE - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(fd, VIDEO_SET_SPU_PALETTE, struct video_spu_palette *palette ) - :name: VIDEO_SET_SPU_PALETTE - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_SET_SPU_PALETTE for this command. - - - .. row 3 - - - video_spu_palette_t \*palette - - - SPU palette according to section ??. - - -Description ------------ - -This ioctl sets the SPU color palette. - -.. c:type:: video_spu_palette - -.. code-block::c - - typedef struct video_spu_palette { /* SPU Palette information */ - int length; - __u8 __user *palette; - } video_spu_palette_t; - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - input is not a valid palette or driver doesn’t handle SPU. diff --git a/Documentation/media/uapi/dvb/video-set-spu.rst b/Documentation/media/uapi/dvb/video-set-spu.rst deleted file mode 100644 index 739e5e7bd133..000000000000 --- a/Documentation/media/uapi/dvb/video-set-spu.rst +++ /dev/null @@ -1,85 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_SET_SPU: - -============= -VIDEO_SET_SPU -============= - -Name ----- - -VIDEO_SET_SPU - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(fd, VIDEO_SET_SPU , struct video_spu *spu) - :name: VIDEO_SET_SPU - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_SET_SPU for this command. - - - .. row 3 - - - video_spu_t \*spu - - - SPU decoding (de)activation and subid setting according to section - ??. - - -Description ------------ - -This ioctl activates or deactivates SPU decoding in a DVD input stream. -It can only be used, if the driver is able to handle a DVD stream. - -.. c:type:: struct video_spu - -.. code-block:: c - - typedef struct video_spu { - int active; - int stream_id; - } video_spu_t; - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - input is not a valid spu setting or driver cannot handle SPU. diff --git a/Documentation/media/uapi/dvb/video-set-system.rst b/Documentation/media/uapi/dvb/video-set-system.rst deleted file mode 100644 index e39cbe080ef7..000000000000 --- a/Documentation/media/uapi/dvb/video-set-system.rst +++ /dev/null @@ -1,77 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _VIDEO_SET_SYSTEM: - -================ -VIDEO_SET_SYSTEM -================ - -Name ----- - -VIDEO_SET_SYSTEM - -.. attention:: This ioctl is deprecated. - -Synopsis --------- - -.. c:function:: int ioctl(fd, VIDEO_SET_SYSTEM , video_system_t system) - :name: VIDEO_SET_SYSTEM - - -Arguments ---------- - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - int fd - - - File descriptor returned by a previous call to open(). - - - .. row 2 - - - int request - - - Equals VIDEO_SET_FORMAT for this command. - - - .. row 3 - - - video_system_t system - - - video system of TV output. - - -Description ------------ - -This ioctl sets the television output format. The format (see section -??) may vary from the color format of the displayed MPEG stream. If the -hardware is not able to display the requested format the call will -return an error. - - -Return Value ------------- - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes <gen-errors>` chapter. - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``EINVAL`` - - - system is not a valid or supported video system. diff --git a/Documentation/media/uapi/dvb/video_function_calls.rst b/Documentation/media/uapi/dvb/video_function_calls.rst index 68588ac7fecb..3f4f6c9ffad7 100644 --- a/Documentation/media/uapi/dvb/video_function_calls.rst +++ b/Documentation/media/uapi/dvb/video_function_calls.rst @@ -21,7 +21,6 @@ Video Function Calls video-get-status video-get-frame-count video-get-pts - video-get-frame-rate video-get-event video-command video-try-command @@ -31,13 +30,7 @@ Video Function Calls video-fast-forward video-slowmotion video-get-capabilities - video-set-id video-clear-buffer video-set-streamtype video-set-format - video-set-system - video-set-highlight - video-set-spu - video-set-spu-palette - video-get-navi video-set-attributes diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst index 640a21de6b8a..a0942171596c 100644 --- a/Documentation/media/uapi/dvb/video_types.rst +++ b/Documentation/media/uapi/dvb/video_types.rst @@ -246,134 +246,3 @@ following bits set according to the hardwares capabilities. #define VIDEO_CAP_SPU 16 #define VIDEO_CAP_NAVI 32 #define VIDEO_CAP_CSS 64 - - -.. _video-system: - -video_system_t -============== - -A call to VIDEO_SET_SYSTEM sets the desired video system for TV -output. The following system types can be set: - - -.. code-block:: c - - typedef enum { - VIDEO_SYSTEM_PAL, - VIDEO_SYSTEM_NTSC, - VIDEO_SYSTEM_PALN, - VIDEO_SYSTEM_PALNc, - VIDEO_SYSTEM_PALM, - VIDEO_SYSTEM_NTSC60, - VIDEO_SYSTEM_PAL60, - VIDEO_SYSTEM_PALM60 - } video_system_t; - - -.. c:type:: video_highlight - -struct video_highlight -====================== - -Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight -information. The call expects the following format for that information: - - -.. code-block:: c - - typedef - struct video_highlight { - boolean active; /* 1=show highlight, 0=hide highlight */ - uint8_t contrast1; /* 7- 4 Pattern pixel contrast */ - /* 3- 0 Background pixel contrast */ - uint8_t contrast2; /* 7- 4 Emphasis pixel-2 contrast */ - /* 3- 0 Emphasis pixel-1 contrast */ - uint8_t color1; /* 7- 4 Pattern pixel color */ - /* 3- 0 Background pixel color */ - uint8_t color2; /* 7- 4 Emphasis pixel-2 color */ - /* 3- 0 Emphasis pixel-1 color */ - uint32_t ypos; /* 23-22 auto action mode */ - /* 21-12 start y */ - /* 9- 0 end y */ - uint32_t xpos; /* 23-22 button color number */ - /* 21-12 start x */ - /* 9- 0 end x */ - } video_highlight_t; - - -.. c:type:: video_spu - -struct video_spu -================ - -Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according -to the following format: - - -.. code-block:: c - - typedef - struct video_spu { - boolean active; - int stream_id; - } video_spu_t; - - -.. c:type:: video_spu_palette - -struct video_spu_palette -======================== - -The following structure is used to set the SPU palette by calling -VIDEO_SPU_PALETTE: - - -.. code-block:: c - - typedef - struct video_spu_palette { - int length; - uint8_t *palette; - } video_spu_palette_t; - - -.. c:type:: video_navi_pack - -struct video_navi_pack -====================== - -In order to get the navigational data the following structure has to be -passed to the ioctl VIDEO_GET_NAVI: - - -.. code-block:: c - - typedef - struct video_navi_pack { - int length; /* 0 ... 1024 */ - uint8_t data[1024]; - } video_navi_pack_t; - - -.. _video-attributes-t: - -video_attributes_t -================== - -The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: - - -.. code-block:: c - - typedef uint16_t video_attributes_t; - /* bits: descr. */ - /* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ - /* 13-12 TV system (0=525/60, 1=625/50) */ - /* 11-10 Aspect ratio (0=4:3, 3=16:9) */ - /* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ - /* 7 line 21-1 data present in GOP (1=yes, 0=no) */ - /* 6 line 21-2 data present in GOP (1=yes, 0=no) */ - /* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ - /* 2 source letterboxed (1=yes, 0=no) */ - /* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ diff --git a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst index f690f9afc470..649cb3d9e058 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst @@ -48,12 +48,8 @@ ioctl never fails. :widths: 1 1 2 - - .. row 1 - - - char - + * - char - ``driver``\ [16] - - Name of the driver implementing the media API as a NUL-terminated ASCII string. The driver version is stored in the ``driver_version`` field. @@ -62,66 +58,38 @@ ioctl never fails. the driver identity. It is also useful to work around known bugs, or to identify drivers in error reports. - - .. row 2 - - - char - + * - char - ``model``\ [32] - - Device model name as a NUL-terminated UTF-8 string. The device version is stored in the ``device_version`` field and is not be appended to the model name. - - .. row 3 - - - char - + * - char - ``serial``\ [40] - - Serial number as a NUL-terminated ASCII string. - - .. row 4 - - - char - + * - char - ``bus_info``\ [32] - - Location of the device in the system as a NUL-terminated ASCII string. This includes the bus type name (PCI, USB, ...) and a bus-specific identifier. - - .. row 5 - - - __u32 - + * - __u32 - ``media_version`` - - Media API version, formatted with the ``KERNEL_VERSION()`` macro. - - .. row 6 - - - __u32 - + * - __u32 - ``hw_revision`` - - Hardware device revision in a driver-specific format. - - .. row 7 - - - __u32 - + * - __u32 - ``driver_version`` - - Media device driver version, formatted with the ``KERNEL_VERSION()`` macro. Together with the ``driver`` field this identifies a particular driver. - - .. row 8 - - - __u32 - + * - __u32 - ``reserved``\ [31] - - Reserved for future extensions. Drivers and applications must set this array to zero. diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst index 582fda488810..fc2e39c070c9 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst @@ -58,142 +58,90 @@ id's until they get an error. :stub-columns: 0 :widths: 1 1 1 1 8 - - - .. row 1 - - - __u32 - + * - __u32 - ``id`` - - - - - Entity id, set by the application. When the id is or'ed with + - Entity ID, set by the application. When the ID is or'ed with ``MEDIA_ENT_ID_FLAG_NEXT``, the driver clears the flag and returns - the first entity with a larger id. - - - .. row 2 - - - char + the first entity with a larger ID. Do not expect that the ID will + always be the same for each instance of the device. In other words, + do not hardcode entity IDs in an application. + * - char - ``name``\ [32] - - - - - Entity name as an UTF-8 NULL-terminated string. - - - .. row 3 - - - __u32 + - Entity name as an UTF-8 NULL-terminated string. This name must be unique + within the media topology. + * - __u32 - ``type`` - - - - Entity type, see :ref:`media-entity-functions` for details. - - .. row 4 - - - __u32 - + * - __u32 - ``revision`` - - - - Entity revision. Always zero (obsolete) - - .. row 5 - - - __u32 - + * - __u32 - ``flags`` - - - - Entity flags, see :ref:`media-entity-flag` for details. - - .. row 6 - - - __u32 - + * - __u32 - ``group_id`` - - - - Entity group ID. Always zero (obsolete) - - .. row 7 - - - __u16 - + * - __u16 - ``pads`` - - - - Number of pads - - .. row 8 - - - __u16 - + * - __u16 - ``links`` - - - - Total number of outbound links. Inbound links are not counted in this field. - - .. row 9 - - - __u32 - + * - __u32 - ``reserved[4]`` - - - - Reserved for future extensions. Drivers and applications must set the array to zero. - - .. row 10 - - - union - - - .. row 11 + * - union - - + * - - struct - - ``dev`` - - - Valid for (sub-)devices that create a single device node. - - .. row 12 - - - + * - - - __u32 - - ``major`` - - Device node major number. - - .. row 13 - - - + * - - - __u32 - - ``minor`` - - Device node minor number. - - .. row 14 - - - + * - - __u8 - - ``raw``\ [184] - - - diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst index 256168b3c3be..f158c134e9b0 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst @@ -62,35 +62,21 @@ returned during the enumeration process. :stub-columns: 0 :widths: 1 1 2 - - - .. row 1 - - - __u32 - + * - __u32 - ``entity`` - - Entity id, set by the application. - - .. row 2 - - - struct :c:type:`media_pad_desc` - + * - struct :c:type:`media_pad_desc` - \*\ ``pads`` - - Pointer to a pads array allocated by the application. Ignored if NULL. - - .. row 3 - - - struct :c:type:`media_link_desc` - + * - struct :c:type:`media_link_desc` - \*\ ``links`` - - Pointer to a links array allocated by the application. Ignored if NULL. - .. c:type:: media_pad_desc .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| @@ -100,37 +86,20 @@ returned during the enumeration process. :stub-columns: 0 :widths: 1 1 2 - - - .. row 1 - - - __u32 - + * - __u32 - ``entity`` - - ID of the entity this pad belongs to. - - .. row 2 - - - __u16 - + * - __u16 - ``index`` + - Pad index, starts at 0. - - 0-based pad index. - - - .. row 3 - - - __u32 - + * - __u32 - ``flags`` - - Pad flags, see :ref:`media-pad-flag` for more details. - - .. row 4 - - - __u32 - + * - __u32 - ``reserved[2]`` - - Reserved for future extensions. Drivers and applications must set the array to zero. @@ -145,37 +114,20 @@ returned during the enumeration process. :stub-columns: 0 :widths: 1 1 2 - - - .. row 1 - - - struct :c:type:`media_pad_desc` - + * - struct :c:type:`media_pad_desc` - ``source`` - - Pad at the origin of this link. - - .. row 2 - - - struct :c:type:`media_pad_desc` - + * - struct :c:type:`media_pad_desc` - ``sink`` - - Pad at the target of this link. - - .. row 3 - - - __u32 - + * - __u32 - ``flags`` - - Link flags, see :ref:`media-link-flag` for more details. - - .. row 4 - - - __u32 - + * - __u32 - ``reserved[4]`` - - Reserved for future extensions. Drivers and applications must set the array to zero. diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst index c4055ddf070a..bac128c7eda9 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst @@ -55,119 +55,66 @@ desired arrays with the media graph elements. :stub-columns: 0 :widths: 1 2 8 - - - .. row 1 - - - __u64 - + * - __u64 - ``topology_version`` - - Version of the media graph topology. When the graph is created, this field starts with zero. Every time a graph element is added or removed, this field is incremented. - - .. row 2 - - - __u32 - + * - __u32 - ``num_entities`` - - Number of entities in the graph - - .. row 3 - - - __u32 - + * - __u32 - ``reserved1`` - - Applications and drivers shall set this to 0. - - .. row 4 - - - __u64 - + * - __u64 - ``ptr_entities`` - - A pointer to a memory area where the entities array will be stored, converted to a 64-bits integer. It can be zero. if zero, the ioctl won't store the entities. It will just update ``num_entities`` - - .. row 5 - - - __u32 - + * - __u32 - ``num_interfaces`` - - Number of interfaces in the graph - - .. row 6 - - - __u32 - + * - __u32 - ``reserved2`` - - Applications and drivers shall set this to 0. - - .. row 7 - - - __u64 - + * - __u64 - ``ptr_interfaces`` - - A pointer to a memory area where the interfaces array will be stored, converted to a 64-bits integer. It can be zero. if zero, the ioctl won't store the interfaces. It will just update ``num_interfaces`` - - .. row 8 - - - __u32 - + * - __u32 - ``num_pads`` - - Total number of pads in the graph - - .. row 9 - - - __u32 - + * - __u32 - ``reserved3`` - - Applications and drivers shall set this to 0. - - .. row 10 - - - __u64 - + * - __u64 - ``ptr_pads`` - - A pointer to a memory area where the pads array will be stored, converted to a 64-bits integer. It can be zero. if zero, the ioctl won't store the pads. It will just update ``num_pads`` - - .. row 11 - - - __u32 - + * - __u32 - ``num_links`` - - Total number of data and interface links in the graph - - .. row 12 - - - __u32 - + * - __u32 - ``reserved4`` - - Applications and drivers shall set this to 0. - - .. row 13 - - - __u64 - + * - __u64 - ``ptr_links`` - - A pointer to a memory area where the links array will be stored, converted to a 64-bits integer. It can be zero. if zero, the ioctl won't store the links. It will just update ``num_links`` @@ -182,37 +129,31 @@ desired arrays with the media graph elements. :stub-columns: 0 :widths: 1 2 8 - - - .. row 1 - - - __u32 - + * - __u32 - ``id`` + - Unique ID for the entity. Do not expect that the ID will + always be the same for each instance of the device. In other words, + do not hardcode entity IDs in an application. - - Unique ID for the entity. - - - .. row 2 - - - char - + * - char - ``name``\ [64] + - Entity name as an UTF-8 NULL-terminated string. This name must be unique + within the media topology. - - Entity name as an UTF-8 NULL-terminated string. - - - .. row 3 - - - __u32 - + * - __u32 - ``function`` - - Entity main function, see :ref:`media-entity-functions` for details. - - .. row 4 - - - __u32 - - - ``reserved``\ [6] + * - __u32 + - ``flags`` + - Entity flags, see :ref:`media-entity-flag` for details. + Only valid if ``MEDIA_V2_ENTITY_HAS_FLAGS(media_version)`` + returns true. The ``media_version`` is defined in struct + :c:type:`media_device_info` and can be retrieved using + :ref:`MEDIA_IOC_DEVICE_INFO`. + * - __u32 + - ``reserved``\ [5] - Reserved for future extensions. Drivers and applications must set this array to zero. @@ -226,47 +167,29 @@ desired arrays with the media graph elements. :stub-columns: 0 :widths: 1 2 8 - - .. row 1 - - - __u32 - + * - __u32 - ``id`` + - Unique ID for the interface. Do not expect that the ID will + always be the same for each instance of the device. In other words, + do not hardcode interface IDs in an application. - - Unique ID for the interface. - - - .. row 2 - - - __u32 - + * - __u32 - ``intf_type`` - - Interface type, see :ref:`media-intf-type` for details. - - .. row 3 - - - __u32 - + * - __u32 - ``flags`` - - Interface flags. Currently unused. - - .. row 4 - - - __u32 - + * - __u32 - ``reserved``\ [9] - - Reserved for future extensions. Drivers and applications must set this array to zero. - - .. row 5 - - - struct media_v2_intf_devnode - + * - struct media_v2_intf_devnode - ``devnode`` - - Used only for device node interfaces. See - :c:type:`media_v2_intf_devnode` for details.. + :c:type:`media_v2_intf_devnode` for details. .. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| @@ -278,24 +201,14 @@ desired arrays with the media graph elements. :stub-columns: 0 :widths: 1 2 8 - - - .. row 1 - - - __u32 - + * - __u32 - ``major`` - - Device node major number. - - .. row 2 - - - __u32 - + * - __u32 - ``minor`` - - Device node minor number. - .. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}| .. c:type:: media_v2_pad @@ -305,37 +218,29 @@ desired arrays with the media graph elements. :stub-columns: 0 :widths: 1 2 8 - - - .. row 1 - - - __u32 - + * - __u32 - ``id`` + - Unique ID for the pad. Do not expect that the ID will + always be the same for each instance of the device. In other words, + do not hardcode pad IDs in an application. - - Unique ID for the pad. - - - .. row 2 - - - __u32 - + * - __u32 - ``entity_id`` - - Unique ID for the entity where this pad belongs. - - .. row 3 - - - __u32 - + * - __u32 - ``flags`` - - Pad flags, see :ref:`media-pad-flag` for more details. - - .. row 4 - - - __u32 - - - ``reserved``\ [5] + * - __u32 + - ``index`` + - Pad index, starts at 0. Only valid if ``MEDIA_V2_PAD_HAS_INDEX(media_version)`` + returns true. The ``media_version`` is defined in struct + :c:type:`media_device_info` and can be retrieved using + :ref:`MEDIA_IOC_DEVICE_INFO`. + * - __u32 + - ``reserved``\ [4] - Reserved for future extensions. Drivers and applications must set this array to zero. @@ -349,49 +254,30 @@ desired arrays with the media graph elements. :stub-columns: 0 :widths: 1 2 8 - - - .. row 1 - - - __u32 - + * - __u32 - ``id`` + - Unique ID for the link. Do not expect that the ID will + always be the same for each instance of the device. In other words, + do not hardcode link IDs in an application. - - Unique ID for the link. - - - .. row 2 - - - __u32 - + * - __u32 - ``source_id`` - - On pad to pad links: unique ID for the source pad. On interface to entity links: unique ID for the interface. - - .. row 3 - - - __u32 - + * - __u32 - ``sink_id`` - - On pad to pad links: unique ID for the sink pad. On interface to entity links: unique ID for the entity. - - .. row 4 - - - __u32 - + * - __u32 - ``flags`` - - Link flags, see :ref:`media-link-flag` for more details. - - .. row 5 - - - __u32 - + * - __u32 - ``reserved``\ [6] - - Reserved for future extensions. Drivers and applications must set this array to zero. diff --git a/Documentation/media/uapi/mediactl/media-types.rst b/Documentation/media/uapi/mediactl/media-types.rst index 2dda14bd89b7..e4c57c8f4553 100644 --- a/Documentation/media/uapi/mediactl/media-types.rst +++ b/Documentation/media/uapi/mediactl/media-types.rst @@ -8,6 +8,41 @@ Types and flags used to represent the media graph elements .. tabularcolumns:: |p{8.2cm}|p{10.3cm}| .. _media-entity-functions: +.. _MEDIA-ENT-F-UNKNOWN: +.. _MEDIA-ENT-F-V4L2-SUBDEV-UNKNOWN: +.. _MEDIA-ENT-F-IO-V4L: +.. _MEDIA-ENT-F-IO-VBI: +.. _MEDIA-ENT-F-IO-SWRADIO: +.. _MEDIA-ENT-F-IO-DTV: +.. _MEDIA-ENT-F-DTV-DEMOD: +.. _MEDIA-ENT-F-TS-DEMUX: +.. _MEDIA-ENT-F-DTV-CA: +.. _MEDIA-ENT-F-DTV-NET-DECAP: +.. _MEDIA-ENT-F-CONN-RF: +.. _MEDIA-ENT-F-CONN-SVIDEO: +.. _MEDIA-ENT-F-CONN-COMPOSITE: +.. _MEDIA-ENT-F-CAM-SENSOR: +.. _MEDIA-ENT-F-FLASH: +.. _MEDIA-ENT-F-LENS: +.. _MEDIA-ENT-F-ATV-DECODER: +.. _MEDIA-ENT-F-TUNER: +.. _MEDIA-ENT-F-IF-VID-DECODER: +.. _MEDIA-ENT-F-IF-AUD-DECODER: +.. _MEDIA-ENT-F-AUDIO-CAPTURE: +.. _MEDIA-ENT-F-AUDIO-PLAYBACK: +.. _MEDIA-ENT-F-AUDIO-MIXER: +.. _MEDIA-ENT-F-PROC-VIDEO-COMPOSER: +.. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-FORMATTER: +.. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-ENC-CONV: +.. _MEDIA-ENT-F-PROC-VIDEO-LUT: +.. _MEDIA-ENT-F-PROC-VIDEO-SCALER: +.. _MEDIA-ENT-F-PROC-VIDEO-STATISTICS: +.. _MEDIA-ENT-F-PROC-VIDEO-ENCODER: +.. _MEDIA-ENT-F-PROC-VIDEO-DECODER: +.. _MEDIA-ENT-F-VID-MUX: +.. _MEDIA-ENT-F-VID-IF-BRIDGE: +.. _MEDIA-ENT-F-DV-DECODER: +.. _MEDIA-ENT-F-DV-ENCODER: .. cssclass:: longtable @@ -15,139 +50,56 @@ Types and flags used to represent the media graph elements :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - .. _MEDIA-ENT-F-UNKNOWN: - .. _MEDIA-ENT-F-V4L2-SUBDEV-UNKNOWN: - - - ``MEDIA_ENT_F_UNKNOWN`` and - + * - ``MEDIA_ENT_F_UNKNOWN`` and ``MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN`` - - Unknown entity. That generally indicates that a driver didn't initialize properly the entity, which is a Kernel bug - - .. row 2 - - .. _MEDIA-ENT-F-IO-V4L: - - - ``MEDIA_ENT_F_IO_V4L`` - + * - ``MEDIA_ENT_F_IO_V4L`` - Data streaming input and/or output entity. - - .. row 3 - - .. _MEDIA-ENT-F-IO-VBI: - - - ``MEDIA_ENT_F_IO_VBI`` - + * - ``MEDIA_ENT_F_IO_VBI`` - V4L VBI streaming input or output entity - - .. row 4 - - .. _MEDIA-ENT-F-IO-SWRADIO: - - - ``MEDIA_ENT_F_IO_SWRADIO`` - + * - ``MEDIA_ENT_F_IO_SWRADIO`` - V4L Software Digital Radio (SDR) streaming input or output entity - - .. row 5 - - .. _MEDIA-ENT-F-IO-DTV: - - - ``MEDIA_ENT_F_IO_DTV`` - + * - ``MEDIA_ENT_F_IO_DTV`` - DVB Digital TV streaming input or output entity - - .. row 6 - - .. _MEDIA-ENT-F-DTV-DEMOD: - - - ``MEDIA_ENT_F_DTV_DEMOD`` - + * - ``MEDIA_ENT_F_DTV_DEMOD`` - Digital TV demodulator entity. - - .. row 7 - - .. _MEDIA-ENT-F-TS-DEMUX: - - - ``MEDIA_ENT_F_TS_DEMUX`` - + * - ``MEDIA_ENT_F_TS_DEMUX`` - MPEG Transport stream demux entity. Could be implemented on hardware or in Kernelspace by the Linux DVB subsystem. - - .. row 8 - - .. _MEDIA-ENT-F-DTV-CA: - - - ``MEDIA_ENT_F_DTV_CA`` - + * - ``MEDIA_ENT_F_DTV_CA`` - Digital TV Conditional Access module (CAM) entity - - .. row 9 - - .. _MEDIA-ENT-F-DTV-NET-DECAP: - - - ``MEDIA_ENT_F_DTV_NET_DECAP`` - + * - ``MEDIA_ENT_F_DTV_NET_DECAP`` - Digital TV network ULE/MLE desencapsulation entity. Could be implemented on hardware or in Kernelspace - - .. row 10 - - .. _MEDIA-ENT-F-CONN-RF: - - - ``MEDIA_ENT_F_CONN_RF`` - + * - ``MEDIA_ENT_F_CONN_RF`` - Connector for a Radio Frequency (RF) signal. - - .. row 11 - - .. _MEDIA-ENT-F-CONN-SVIDEO: - - - ``MEDIA_ENT_F_CONN_SVIDEO`` - + * - ``MEDIA_ENT_F_CONN_SVIDEO`` - Connector for a S-Video signal. - - .. row 12 - - .. _MEDIA-ENT-F-CONN-COMPOSITE: - - - ``MEDIA_ENT_F_CONN_COMPOSITE`` - + * - ``MEDIA_ENT_F_CONN_COMPOSITE`` - Connector for a RGB composite signal. - - .. row 13 - - .. _MEDIA-ENT-F-CAM-SENSOR: - - - ``MEDIA_ENT_F_CAM_SENSOR`` - + * - ``MEDIA_ENT_F_CAM_SENSOR`` - Camera video sensor entity. - - .. row 14 - - .. _MEDIA-ENT-F-FLASH: - - - ``MEDIA_ENT_F_FLASH`` - + * - ``MEDIA_ENT_F_FLASH`` - Flash controller entity. - - .. row 15 - - .. _MEDIA-ENT-F-LENS: - - - ``MEDIA_ENT_F_LENS`` - + * - ``MEDIA_ENT_F_LENS`` - Lens controller entity. - - .. row 16 - - .. _MEDIA-ENT-F-ATV-DECODER: - - - ``MEDIA_ENT_F_ATV_DECODER`` - + * - ``MEDIA_ENT_F_ATV_DECODER`` - Analog video decoder, the basic function of the video decoder is to accept analogue video from a wide variety of sources such as broadcast, DVD players, cameras and video cassette recorders, in @@ -155,36 +107,21 @@ Types and flags used to represent the media graph elements its component parts, luminance and chrominance, and output it in some digital video standard, with appropriate timing signals. - - .. row 17 - - .. _MEDIA-ENT-F-TUNER: - - - ``MEDIA_ENT_F_TUNER`` - + * - ``MEDIA_ENT_F_TUNER`` - Digital TV, analog TV, radio and/or software radio tuner, with consists on a PLL tuning stage that converts radio frequency (RF) signal into an Intermediate Frequency (IF). Modern tuners have internally IF-PLL decoders for audio and video, but older models have those stages implemented on separate entities. - - .. row 18 - - .. _MEDIA-ENT-F-IF-VID-DECODER: - - - ``MEDIA_ENT_F_IF_VID_DECODER`` - + * - ``MEDIA_ENT_F_IF_VID_DECODER`` - IF-PLL video decoder. It receives the IF from a PLL and decodes the analog TV video signal. This is commonly found on some very old analog tuners, like Philips MK3 designs. They all contain a tda9887 (or some software compatible similar chip, like tda9885). Those devices use a different I2C address than the tuner PLL. - - .. row 19 - - .. _MEDIA-ENT-F-IF-AUD-DECODER: - - - ``MEDIA_ENT_F_IF_AUD_DECODER`` - + * - ``MEDIA_ENT_F_IF_AUD_DECODER`` - IF-PLL sound decoder. It receives the IF from a PLL and decodes the analog TV audio signal. This is commonly found on some very old analog hardware, like Micronas msp3400, Philips tda9840, @@ -192,36 +129,16 @@ Types and flags used to represent the media graph elements tuner PLL and should be controlled together with the IF-PLL video decoder. - - .. row 20 - - .. _MEDIA-ENT-F-AUDIO-CAPTURE: - - - ``MEDIA_ENT_F_AUDIO_CAPTURE`` - + * - ``MEDIA_ENT_F_AUDIO_CAPTURE`` - Audio Capture Function Entity. - - .. row 21 - - .. _MEDIA-ENT-F-AUDIO-PLAYBACK: - - - ``MEDIA_ENT_F_AUDIO_PLAYBACK`` - + * - ``MEDIA_ENT_F_AUDIO_PLAYBACK`` - Audio Playback Function Entity. - - .. row 22 - - .. _MEDIA-ENT-F-AUDIO-MIXER: - - - ``MEDIA_ENT_F_AUDIO_MIXER`` - + * - ``MEDIA_ENT_F_AUDIO_MIXER`` - Audio Mixer Function Entity. - - .. row 23 - - .. _MEDIA-ENT-F-PROC-VIDEO-COMPOSER: - - - ``MEDIA_ENT_F_PROC_VIDEO_COMPOSER`` - + * - ``MEDIA_ENT_F_PROC_VIDEO_COMPOSER`` - Video composer (blender). An entity capable of video composing must have at least two sink pads and one source pad, and composes input video frames onto output video @@ -229,12 +146,7 @@ Types and flags used to represent the media graph elements color keying, raster operations (ROP), stitching or any other means. - - .. row 24 - - .. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-FORMATTER: - - - ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER`` - + * - ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER`` - Video pixel formatter. An entity capable of pixel formatting must have at least one sink pad and one source pad. Read pixel formatters read pixels from memory and perform a subset @@ -243,12 +155,7 @@ Types and flags used to represent the media graph elements a subset of dithering, pixel encoding conversion and packing and write pixels to memory. - - .. row 25 - - .. _MEDIA-ENT-F-PROC-VIDEO-PIXEL-ENC-CONV: - - - ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV`` - + * - ``MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV`` - Video pixel encoding converter. An entity capable of pixel enconding conversion must have at least one sink pad and one source pad, and convert the encoding of pixels received on @@ -257,12 +164,7 @@ Types and flags used to represent the media graph elements to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB conversions. - - .. row 26 - - .. _MEDIA-ENT-F-PROC-VIDEO-LUT: - - - ``MEDIA_ENT_F_PROC_VIDEO_LUT`` - + * - ``MEDIA_ENT_F_PROC_VIDEO_LUT`` - Video look-up table. An entity capable of video lookup table processing must have one sink pad and one source pad. It uses the values of the pixels received on its sink pad to look up @@ -271,12 +173,7 @@ Types and flags used to represent the media graph elements separately or combine them for multi-dimensional table lookups. - - .. row 27 - - .. _MEDIA-ENT-F-PROC-VIDEO-SCALER: - - - ``MEDIA_ENT_F_PROC_VIDEO_SCALER`` - + * - ``MEDIA_ENT_F_PROC_VIDEO_SCALER`` - Video scaler. An entity capable of video scaling must have at least one sink pad and one source pad, and scale the video frame(s) received on its sink pad(s) to a different @@ -287,311 +184,190 @@ Types and flags used to represent the media graph elements sub-sampling (occasionally also referred to as skipping) are considered as scaling. - - .. row 28 - - .. _MEDIA-ENT-F-PROC-VIDEO-STATISTICS: - - - ``MEDIA_ENT_F_PROC_VIDEO_STATISTICS`` - + * - ``MEDIA_ENT_F_PROC_VIDEO_STATISTICS`` - Video statistics computation (histogram, 3A, etc.). An entity capable of statistics computation must have one sink pad and one source pad. It computes statistics over the frames received on its sink pad and outputs the statistics data on its source pad. - - .. row 29 + * - ``MEDIA_ENT_F_PROC_VIDEO_ENCODER`` + - Video (MPEG, HEVC, VPx, etc.) encoder. An entity capable of + compressing video frames. Must have one sink pad and at least + one source pad. - .. _MEDIA-ENT-F-VID-MUX: - - - ``MEDIA_ENT_F_VID_MUX`` + * - ``MEDIA_ENT_F_PROC_VIDEO_DECODER`` + - Video (MPEG, HEVC, VPx, etc.) decoder. An entity capable of + decompressing a compressed video stream into uncompressed video + frames. Must have one sink pad and at least one source pad. + * - ``MEDIA_ENT_F_VID_MUX`` - Video multiplexer. An entity capable of multiplexing must have at least two sink pads and one source pad, and must pass the video frame(s) received from the active sink pad to the source pad. - - .. row 30 - - .. _MEDIA-ENT-F-VID-IF-BRIDGE: - - - ``MEDIA_ENT_F_VID_IF_BRIDGE`` - + * - ``MEDIA_ENT_F_VID_IF_BRIDGE`` - Video interface bridge. A video interface bridge entity must have at least one sink pad and at least one source pad. It receives video frames on its sink pad from an input video bus of one type (HDMI, eDP, MIPI CSI-2, etc.), and outputs them on its source pad to an output video bus of another type (eDP, MIPI CSI-2, parallel, etc.). - - .. row 31 - - .. _MEDIA-ENT-F-DTV-DECODER: - - - ``MEDIA_ENT_F_DTV_DECODER`` - + * - ``MEDIA_ENT_F_DV_DECODER`` - Digital video decoder. The basic function of the video decoder is to accept digital video from a wide variety of sources and output it in some digital video standard, with appropriate timing signals. + * - ``MEDIA_ENT_F_DV_ENCODER`` + - Digital video encoder. The basic function of the video encoder is + to accept digital video from some digital video standard with + appropriate timing signals (usually a parallel video bus with sync + signals) and output this to a digital video output connector such + as HDMI or DisplayPort. + .. tabularcolumns:: |p{5.5cm}|p{12.0cm}| .. _media-entity-flag: +.. _MEDIA-ENT-FL-DEFAULT: +.. _MEDIA-ENT-FL-CONNECTOR: .. flat-table:: Media entity flags :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - .. _MEDIA-ENT-FL-DEFAULT: - - - ``MEDIA_ENT_FL_DEFAULT`` - + * - ``MEDIA_ENT_FL_DEFAULT`` - Default entity for its type. Used to discover the default audio, VBI and video devices, the default camera sensor, etc. - - .. row 2 - - .. _MEDIA-ENT-FL-CONNECTOR: - - - ``MEDIA_ENT_FL_CONNECTOR`` - + * - ``MEDIA_ENT_FL_CONNECTOR`` - The entity represents a connector. .. tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{5.0cm}| .. _media-intf-type: +.. _MEDIA-INTF-T-DVB-FE: +.. _MEDIA-INTF-T-DVB-DEMUX: +.. _MEDIA-INTF-T-DVB-DVR: +.. _MEDIA-INTF-T-DVB-CA: +.. _MEDIA-INTF-T-DVB-NET: +.. _MEDIA-INTF-T-V4L-VIDEO: +.. _MEDIA-INTF-T-V4L-VBI: +.. _MEDIA-INTF-T-V4L-RADIO: +.. _MEDIA-INTF-T-V4L-SUBDEV: +.. _MEDIA-INTF-T-V4L-SWRADIO: +.. _MEDIA-INTF-T-V4L-TOUCH: +.. _MEDIA-INTF-T-ALSA-PCM-CAPTURE: +.. _MEDIA-INTF-T-ALSA-PCM-PLAYBACK: +.. _MEDIA-INTF-T-ALSA-CONTROL: +.. _MEDIA-INTF-T-ALSA-COMPRESS: +.. _MEDIA-INTF-T-ALSA-RAWMIDI: +.. _MEDIA-INTF-T-ALSA-HWDEP: +.. _MEDIA-INTF-T-ALSA-SEQUENCER: +.. _MEDIA-INTF-T-ALSA-TIMER: .. flat-table:: Media interface types :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - .. _MEDIA-INTF-T-DVB-FE: - - - ``MEDIA_INTF_T_DVB_FE`` - + * - ``MEDIA_INTF_T_DVB_FE`` - Device node interface for the Digital TV frontend - - typically, /dev/dvb/adapter?/frontend? - - .. row 2 - - .. _MEDIA-INTF-T-DVB-DEMUX: - - - ``MEDIA_INTF_T_DVB_DEMUX`` - + * - ``MEDIA_INTF_T_DVB_DEMUX`` - Device node interface for the Digital TV demux - - typically, /dev/dvb/adapter?/demux? - - .. row 3 - - .. _MEDIA-INTF-T-DVB-DVR: - - - ``MEDIA_INTF_T_DVB_DVR`` - + * - ``MEDIA_INTF_T_DVB_DVR`` - Device node interface for the Digital TV DVR - - typically, /dev/dvb/adapter?/dvr? - - .. row 4 - - .. _MEDIA-INTF-T-DVB-CA: - - - ``MEDIA_INTF_T_DVB_CA`` - + * - ``MEDIA_INTF_T_DVB_CA`` - Device node interface for the Digital TV Conditional Access - - typically, /dev/dvb/adapter?/ca? - - .. row 5 - - .. _MEDIA-INTF-T-DVB-NET: - - - ``MEDIA_INTF_T_DVB_NET`` - + * - ``MEDIA_INTF_T_DVB_NET`` - Device node interface for the Digital TV network control - - typically, /dev/dvb/adapter?/net? - - .. row 6 - - .. _MEDIA-INTF-T-V4L-VIDEO: - - - ``MEDIA_INTF_T_V4L_VIDEO`` - + * - ``MEDIA_INTF_T_V4L_VIDEO`` - Device node interface for video (V4L) - - typically, /dev/video? - - .. row 7 - - .. _MEDIA-INTF-T-V4L-VBI: - - - ``MEDIA_INTF_T_V4L_VBI`` - + * - ``MEDIA_INTF_T_V4L_VBI`` - Device node interface for VBI (V4L) - - typically, /dev/vbi? - - .. row 8 - - .. _MEDIA-INTF-T-V4L-RADIO: - - - ``MEDIA_INTF_T_V4L_RADIO`` - + * - ``MEDIA_INTF_T_V4L_RADIO`` - Device node interface for radio (V4L) - - typically, /dev/radio? - - .. row 9 - - .. _MEDIA-INTF-T-V4L-SUBDEV: - - - ``MEDIA_INTF_T_V4L_SUBDEV`` - + * - ``MEDIA_INTF_T_V4L_SUBDEV`` - Device node interface for a V4L subdevice - - typically, /dev/v4l-subdev? - - .. row 10 - - .. _MEDIA-INTF-T-V4L-SWRADIO: - - - ``MEDIA_INTF_T_V4L_SWRADIO`` - + * - ``MEDIA_INTF_T_V4L_SWRADIO`` - Device node interface for Software Defined Radio (V4L) - - typically, /dev/swradio? - - .. row 11 - - .. _MEDIA-INTF-T-V4L-TOUCH: - - - ``MEDIA_INTF_T_V4L_TOUCH`` - + * - ``MEDIA_INTF_T_V4L_TOUCH`` - Device node interface for Touch device (V4L) - - typically, /dev/v4l-touch? - - .. row 12 - - .. _MEDIA-INTF-T-ALSA-PCM-CAPTURE: - - - ``MEDIA_INTF_T_ALSA_PCM_CAPTURE`` - + * - ``MEDIA_INTF_T_ALSA_PCM_CAPTURE`` - Device node interface for ALSA PCM Capture - - typically, /dev/snd/pcmC?D?c - - .. row 13 - - .. _MEDIA-INTF-T-ALSA-PCM-PLAYBACK: - - - ``MEDIA_INTF_T_ALSA_PCM_PLAYBACK`` - + * - ``MEDIA_INTF_T_ALSA_PCM_PLAYBACK`` - Device node interface for ALSA PCM Playback - - typically, /dev/snd/pcmC?D?p - - .. row 14 - - .. _MEDIA-INTF-T-ALSA-CONTROL: - - - ``MEDIA_INTF_T_ALSA_CONTROL`` - + * - ``MEDIA_INTF_T_ALSA_CONTROL`` - Device node interface for ALSA Control - - typically, /dev/snd/controlC? - - .. row 15 - - .. _MEDIA-INTF-T-ALSA-COMPRESS: - - - ``MEDIA_INTF_T_ALSA_COMPRESS`` - + * - ``MEDIA_INTF_T_ALSA_COMPRESS`` - Device node interface for ALSA Compress - - typically, /dev/snd/compr? - - .. row 16 - - .. _MEDIA-INTF-T-ALSA-RAWMIDI: - - - ``MEDIA_INTF_T_ALSA_RAWMIDI`` - + * - ``MEDIA_INTF_T_ALSA_RAWMIDI`` - Device node interface for ALSA Raw MIDI - - typically, /dev/snd/midi? - - .. row 17 - - .. _MEDIA-INTF-T-ALSA-HWDEP: - - - ``MEDIA_INTF_T_ALSA_HWDEP`` - + * - ``MEDIA_INTF_T_ALSA_HWDEP`` - Device node interface for ALSA Hardware Dependent - - typically, /dev/snd/hwC?D? - - .. row 18 - - .. _MEDIA-INTF-T-ALSA-SEQUENCER: - - - ``MEDIA_INTF_T_ALSA_SEQUENCER`` - + * - ``MEDIA_INTF_T_ALSA_SEQUENCER`` - Device node interface for ALSA Sequencer - - typically, /dev/snd/seq - - .. row 19 - - .. _MEDIA-INTF-T-ALSA-TIMER: - - - ``MEDIA_INTF_T_ALSA_TIMER`` - + * - ``MEDIA_INTF_T_ALSA_TIMER`` - Device node interface for ALSA Timer - - typically, /dev/snd/timer .. tabularcolumns:: |p{5.5cm}|p{12.0cm}| .. _media-pad-flag: +.. _MEDIA-PAD-FL-SINK: +.. _MEDIA-PAD-FL-SOURCE: +.. _MEDIA-PAD-FL-MUST-CONNECT: .. flat-table:: Media pad flags :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - .. _MEDIA-PAD-FL-SINK: - - - ``MEDIA_PAD_FL_SINK`` - + * - ``MEDIA_PAD_FL_SINK`` - Input pad, relative to the entity. Input pads sink data and are targets of links. - - .. row 2 - - .. _MEDIA-PAD-FL-SOURCE: - - - ``MEDIA_PAD_FL_SOURCE`` - + * - ``MEDIA_PAD_FL_SOURCE`` - Output pad, relative to the entity. Output pads source data and are origins of links. - - .. row 3 - - .. _MEDIA-PAD-FL-MUST-CONNECT: - - - ``MEDIA_PAD_FL_MUST_CONNECT`` - + * - ``MEDIA_PAD_FL_MUST_CONNECT`` - If this flag is set and the pad is linked to any other pad, then at least one of those links must be enabled for the entity to be able to stream. There could be temporary reasons (e.g. device @@ -606,46 +382,29 @@ must be set for every pad. .. tabularcolumns:: |p{5.5cm}|p{12.0cm}| .. _media-link-flag: +.. _MEDIA-LNK-FL-ENABLED: +.. _MEDIA-LNK-FL-IMMUTABLE: +.. _MEDIA-LNK-FL-DYNAMIC: +.. _MEDIA-LNK-FL-LINK-TYPE: .. flat-table:: Media link flags :header-rows: 0 :stub-columns: 0 - - - .. row 1 - - .. _MEDIA-LNK-FL-ENABLED: - - - ``MEDIA_LNK_FL_ENABLED`` - + * - ``MEDIA_LNK_FL_ENABLED`` - The link is enabled and can be used to transfer media data. When two or more links target a sink pad, only one of them can be enabled at a time. - - .. row 2 - - .. _MEDIA-LNK-FL-IMMUTABLE: - - - ``MEDIA_LNK_FL_IMMUTABLE`` - + * - ``MEDIA_LNK_FL_IMMUTABLE`` - The link enabled state can't be modified at runtime. An immutable link is always enabled. - - .. row 3 - - .. _MEDIA-LNK-FL-DYNAMIC: - - - ``MEDIA_LNK_FL_DYNAMIC`` - + * - ``MEDIA_LNK_FL_DYNAMIC`` - The link enabled state can be modified during streaming. This flag is set by drivers and is read-only for applications. - - .. row 4 - - .. _MEDIA-LNK-FL-LINK-TYPE: - - - ``MEDIA_LNK_FL_LINK_TYPE`` - + * - ``MEDIA_LNK_FL_LINK_TYPE`` - This is a bitmask that defines the type of the link. Currently, two types of links are supported: diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 03931f9b1285..9f7312bf3365 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1955,9 +1955,51 @@ enum v4l2_vp8_golden_frame_sel - ``V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (integer)`` Quantization parameter for a P frame for VP8. -``V4L2_CID_MPEG_VIDEO_VPX_PROFILE (integer)`` - Select the desired profile for VPx encoder. Acceptable values are 0, - 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3. +.. _v4l2-mpeg-video-vp8-profile: + +``V4L2_CID_MPEG_VIDEO_VP8_PROFILE`` + (enum) + +enum v4l2_mpeg_video_vp8_profile - + This control allows selecting the profile for VP8 encoder. + This is also used to enumerate supported profiles by VP8 encoder or decoder. + Possible values are: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_0`` + - Profile 0 + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_1`` + - Profile 1 + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_2`` + - Profile 2 + * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3`` + - Profile 3 + +.. _v4l2-mpeg-video-vp9-profile: + +``V4L2_CID_MPEG_VIDEO_VP9_PROFILE`` + (enum) + +enum v4l2_mpeg_video_vp9_profile - + This control allows selecting the profile for VP9 encoder. + This is also used to enumerate supported profiles by VP9 encoder or decoder. + Possible values are: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_0`` + - Profile 0 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_1`` + - Profile 1 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_2`` + - Profile 2 + * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` + - Profile 3 High Efficiency Video Coding (HEVC/H.265) Control Reference diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst index abec03937bb3..d382e7a5c38e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst +++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst @@ -95,3 +95,10 @@ Compressed Formats - ``V4L2_PIX_FMT_HEVC`` - 'HEVC' - HEVC/H.265 video elementary stream. + * .. _V4L2-PIX-FMT-FWHT: + + - ``V4L2_PIX_FMT_FWHT`` + - 'FWHT' + - Video elementary stream using a codec based on the Fast Walsh Hadamard + Transform. This codec is implemented by the vicodec ('Virtual Codec') + driver. See the vicodec-codec.h header for more details. diff --git a/Documentation/media/uapi/v4l/pixfmt-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-rgb.rst index cf2ef7df9616..1f9a7e3a07c9 100644 --- a/Documentation/media/uapi/v4l/pixfmt-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-rgb.rst @@ -19,4 +19,5 @@ RGB Formats pixfmt-srggb10-ipu3 pixfmt-srggb12 pixfmt-srggb12p + pixfmt-srggb14p pixfmt-srggb16 diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst new file mode 100644 index 000000000000..88d20c0e4282 --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst @@ -0,0 +1,127 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _V4L2-PIX-FMT-SRGGB14P: +.. _v4l2-pix-fmt-sbggr14p: +.. _v4l2-pix-fmt-sgbrg14p: +.. _v4l2-pix-fmt-sgrbg14p: + +******************************************************************************************************************************* +V4L2_PIX_FMT_SRGGB14P ('pRCC'), V4L2_PIX_FMT_SGRBG14P ('pgCC'), V4L2_PIX_FMT_SGBRG14P ('pGCC'), V4L2_PIX_FMT_SBGGR14P ('pBCC'), +******************************************************************************************************************************* + +*man V4L2_PIX_FMT_SRGGB14P(2)* + +V4L2_PIX_FMT_SGRBG14P +V4L2_PIX_FMT_SGBRG14P +V4L2_PIX_FMT_SBGGR14P +14-bit packed Bayer formats + + +Description +=========== + +These four pixel formats are packed raw sRGB / Bayer formats with 14 +bits per colour. Every four consecutive samples are packed into seven +bytes. Each of the first four bytes contain the eight high order bits +of the pixels, and the three following bytes contains the six least +significants bits of each pixel, in the same order. + +Each n-pixel row contains n/2 green samples and n/2 blue or red samples, +with alternating green-red and green-blue rows. They are conventionally +described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example +of one of these formats: + +**Byte Order.** +Each cell is one byte. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 2 1 1 1 1 1 1 1 + + + - .. row 1 + + - start + 0: + + - B\ :sub:`00high` + + - G\ :sub:`01high` + + - B\ :sub:`02high` + + - G\ :sub:`03high` + + - G\ :sub:`01low bits 1--0`\ (bits 7--6) + B\ :sub:`00low bits 5--0`\ (bits 5--0) + + - R\ :sub:`02low bits 3--0`\ (bits 7--4) + G\ :sub:`01low bits 5--2`\ (bits 3--0) + + - G\ :sub:`03low bits 5--0`\ (bits 7--2) + R\ :sub:`02low bits 5--4`\ (bits 1--0) + + - .. row 2 + + - start + 7: + + - G\ :sub:`00high` + + - R\ :sub:`01high` + + - G\ :sub:`02high` + + - R\ :sub:`03high` + + - R\ :sub:`01low bits 1--0`\ (bits 7--6) + G\ :sub:`00low bits 5--0`\ (bits 5--0) + + - G\ :sub:`02low bits 3--0`\ (bits 7--4) + R\ :sub:`01low bits 5--2`\ (bits 3--0) + + - R\ :sub:`03low bits 5--0`\ (bits 7--2) + G\ :sub:`02low bits 5--4`\ (bits 1--0) + + - .. row 3 + + - start + 14 + + - B\ :sub:`20high` + + - G\ :sub:`21high` + + - B\ :sub:`22high` + + - G\ :sub:`23high` + + - G\ :sub:`21low bits 1--0`\ (bits 7--6) + B\ :sub:`20low bits 5--0`\ (bits 5--0) + + - R\ :sub:`22low bits 3--0`\ (bits 7--4) + G\ :sub:`21low bits 5--2`\ (bits 3--0) + + - G\ :sub:`23low bits 5--0`\ (bits 7--2) + R\ :sub:`22low bits 5--4`\ (bits 1--0) + + - .. row 4 + + - start + 21 + + - G\ :sub:`30high` + + - R\ :sub:`31high` + + - G\ :sub:`32high` + + - R\ :sub:`33high` + + - R\ :sub:`31low bits 1--0`\ (bits 7--6) + G\ :sub:`30low bits 5--0`\ (bits 5--0) + + - G\ :sub:`32low bits 3--0`\ (bits 7--4) + R\ :sub:`31low bits 5--2`\ (bits 3--0) + + - R\ :sub:`33low bits 5--0`\ (bits 7--2) + G\ :sub:`32low bits 5--4`\ (bits 1--0) diff --git a/Documentation/media/uapi/v4l/pixfmt-y10p.rst b/Documentation/media/uapi/v4l/pixfmt-y10p.rst new file mode 100644 index 000000000000..13b571306915 --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-y10p.rst @@ -0,0 +1,33 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _V4L2-PIX-FMT-Y10P: + +****************************** +V4L2_PIX_FMT_Y10P ('Y10P') +****************************** + +Grey-scale image as a MIPI RAW10 packed array + + +Description +=========== + +This is a packed grey-scale image format with a depth of 10 bits per +pixel. Every four consecutive pixels are packed into 5 bytes. Each of +the first 4 bytes contain the 8 high order bits of the pixels, and +the 5th byte contains the 2 least significants bits of each pixel, +in the same order. + +**Bit-packed representation.** + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 8 8 8 8 64 + + * - Y'\ :sub:`00[9:2]` + - Y'\ :sub:`01[9:2]` + - Y'\ :sub:`02[9:2]` + - Y'\ :sub:`03[9:2]` + - Y'\ :sub:`03[1:0]`\ (bits 7--6) Y'\ :sub:`02[1:0]`\ (bits 5--4) + Y'\ :sub:`01[1:0]`\ (bits 3--2) Y'\ :sub:`00[1:0]`\ (bits 1--0) diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst index 9fcabe7f9367..8e73fcfc6900 100644 --- a/Documentation/media/uapi/v4l/subdev-formats.rst +++ b/Documentation/media/uapi/v4l/subdev-formats.rst @@ -37,19 +37,22 @@ Media Bus Formats - Image colorspace, from enum :c:type:`v4l2_colorspace`. See :ref:`colorspaces` for details. - * - enum :c:type:`v4l2_ycbcr_encoding` + * - __u16 - ``ycbcr_enc`` - - This information supplements the ``colorspace`` and must be set by + - Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`. + This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output streams, see :ref:`colorspaces`. - * - enum :c:type:`v4l2_quantization` + * - __u16 - ``quantization`` - - This information supplements the ``colorspace`` and must be set by + - Quantization range, from enum :c:type:`v4l2_quantization`. + This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output streams, see :ref:`colorspaces`. - * - enum :c:type:`v4l2_xfer_func` + * - __u16 - ``xfer_func`` - - This information supplements the ``colorspace`` and must be set by + - Transfer function, from enum :c:type:`v4l2_xfer_func`. + This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output streams, see :ref:`colorspaces`. * - __u16 @@ -4315,6 +4318,78 @@ the following codes. - y\ :sub:`2` - y\ :sub:`1` - y\ :sub:`0` + * .. _MEDIA-BUS-FMT-Y10-2X8-PADHI_LE: + + - MEDIA_BUS_FMT_Y10_2X8_PADHI_LE + - 0x202c + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - y\ :sub:`7` + - y\ :sub:`6` + - y\ :sub:`5` + - y\ :sub:`4` + - y\ :sub:`3` + - y\ :sub:`2` + - y\ :sub:`1` + - y\ :sub:`0` + * - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - 0 + - 0 + - 0 + - 0 + - 0 + - 0 + - y\ :sub:`9` + - y\ :sub:`8` * .. _MEDIA-BUS-FMT-UYVY10-2X10: - MEDIA_BUS_FMT_UYVY10_2X10 diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst b/Documentation/media/uapi/v4l/vidioc-enumstd.rst index b7fda29f46a1..2644a62acd4b 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumstd.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumstd.rst @@ -2,14 +2,14 @@ .. _VIDIOC_ENUMSTD: -******************** -ioctl VIDIOC_ENUMSTD -******************** +******************************************* +ioctl VIDIOC_ENUMSTD, VIDIOC_SUBDEV_ENUMSTD +******************************************* Name ==== -VIDIOC_ENUMSTD - Enumerate supported video standards +VIDIOC_ENUMSTD - VIDIOC_SUBDEV_ENUMSTD - Enumerate supported video standards Synopsis @@ -18,6 +18,9 @@ Synopsis .. c:function:: int ioctl( int fd, VIDIOC_ENUMSTD, struct v4l2_standard *argp ) :name: VIDIOC_ENUMSTD +.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_ENUMSTD, struct v4l2_standard *argp ) + :name: VIDIOC_SUBDEV_ENUMSTD + Arguments ========= diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst index 90791ab51a53..8d94f0404df2 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-std.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-std.rst @@ -2,14 +2,14 @@ .. _VIDIOC_G_STD: -******************************** -ioctl VIDIOC_G_STD, VIDIOC_S_STD -******************************** +************************************************************************** +ioctl VIDIOC_G_STD, VIDIOC_S_STD, VIDIOC_SUBDEV_G_STD, VIDIOC_SUBDEV_S_STD +************************************************************************** Name ==== -VIDIOC_G_STD - VIDIOC_S_STD - Query or select the video standard of the current input +VIDIOC_G_STD - VIDIOC_S_STD - VIDIOC_SUBDEV_G_STD - VIDIOC_SUBDEV_S_STD - Query or select the video standard of the current input Synopsis @@ -21,6 +21,12 @@ Synopsis .. c:function:: int ioctl( int fd, VIDIOC_S_STD, const v4l2_std_id *argp ) :name: VIDIOC_S_STD +.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_STD, v4l2_std_id *argp ) + :name: VIDIOC_SUBDEV_G_STD + +.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_STD, const v4l2_std_id *argp ) + :name: VIDIOC_SUBDEV_S_STD + Arguments ========= diff --git a/Documentation/media/uapi/v4l/vidioc-querystd.rst b/Documentation/media/uapi/v4l/vidioc-querystd.rst index cf40bca19b9f..a8385cc74818 100644 --- a/Documentation/media/uapi/v4l/vidioc-querystd.rst +++ b/Documentation/media/uapi/v4l/vidioc-querystd.rst @@ -2,14 +2,14 @@ .. _VIDIOC_QUERYSTD: -********************* -ioctl VIDIOC_QUERYSTD -********************* +********************************************* +ioctl VIDIOC_QUERYSTD, VIDIOC_SUBDEV_QUERYSTD +********************************************* Name ==== -VIDIOC_QUERYSTD - Sense the video standard received by the current input +VIDIOC_QUERYSTD - VIDIOC_SUBDEV_QUERYSTD - Sense the video standard received by the current input Synopsis @@ -18,6 +18,9 @@ Synopsis .. c:function:: int ioctl( int fd, VIDIOC_QUERYSTD, v4l2_std_id *argp ) :name: VIDIOC_QUERYSTD +.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_QUERYSTD, v4l2_std_id *argp ) + :name: VIDIOC_SUBDEV_QUERYSTD + Arguments ========= diff --git a/Documentation/media/uapi/v4l/yuv-formats.rst b/Documentation/media/uapi/v4l/yuv-formats.rst index 3334ea445657..9ab0592d08da 100644 --- a/Documentation/media/uapi/v4l/yuv-formats.rst +++ b/Documentation/media/uapi/v4l/yuv-formats.rst @@ -29,6 +29,7 @@ to brightness information. pixfmt-y10 pixfmt-y12 pixfmt-y10b + pixfmt-y10p pixfmt-y16 pixfmt-y16-be pixfmt-y8i diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst index 9e66b7b5770f..f27c8df20b2b 100644 --- a/Documentation/media/v4l-drivers/qcom_camss.rst +++ b/Documentation/media/v4l-drivers/qcom_camss.rst @@ -7,34 +7,34 @@ Introduction ------------ This file documents the Qualcomm Camera Subsystem driver located under -drivers/media/platform/qcom/camss-8x16. +drivers/media/platform/qcom/camss. The current version of the driver supports the Camera Subsystem found on -Qualcomm MSM8916 and APQ8016 processors. +Qualcomm MSM8916/APQ8016 and MSM8996/APQ8096 processors. The driver implements V4L2, Media controller and V4L2 subdev interfaces. Camera sensor using V4L2 subdev interface in the kernel is supported. The driver is implemented using as a reference the Qualcomm Camera Subsystem -driver for Android as found in Code Aurora [#f1]_. +driver for Android as found in Code Aurora [#f1]_ [#f2]_. Qualcomm Camera Subsystem hardware ---------------------------------- -The Camera Subsystem hardware found on 8x16 processors and supported by the -driver consists of: +The Camera Subsystem hardware found on 8x16 / 8x96 processors and supported by +the driver consists of: -- 2 CSIPHY modules. They handle the Physical layer of the CSI2 receivers. +- 2 / 3 CSIPHY modules. They handle the Physical layer of the CSI2 receivers. A separate camera sensor can be connected to each of the CSIPHY module; -- 2 CSID (CSI Decoder) modules. They handle the Protocol and Application layer - of the CSI2 receivers. A CSID can decode data stream from any of the CSIPHY. - Each CSID also contains a TG (Test Generator) block which can generate +- 2 / 4 CSID (CSI Decoder) modules. They handle the Protocol and Application + layer of the CSI2 receivers. A CSID can decode data stream from any of the + CSIPHY. Each CSID also contains a TG (Test Generator) block which can generate artificial input data for test purposes; - ISPIF (ISP Interface) module. Handles the routing of the data streams from the CSIDs to the inputs of the VFE; -- VFE (Video Front End) module. Contains a pipeline of image processing hardware - blocks. The VFE has different input interfaces. The PIX (Pixel) input +- 1 / 2 VFE (Video Front End) module(s). Contain a pipeline of image processing + hardware blocks. The VFE has different input interfaces. The PIX (Pixel) input interface feeds the input data to the image processing pipeline. The image processing pipeline contains also a scale and crop module at the end. Three RDI (Raw Dump Interface) input interfaces bypass the image processing @@ -49,18 +49,33 @@ The current version of the driver supports: - Input from camera sensor via CSIPHY; - Generation of test input data by the TG in CSID; -- RDI interface of VFE - raw dump of the input data to memory. +- RDI interface of VFE - Supported formats: + - Raw dump of the input data to memory. - - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / - V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY); - - MIPI RAW8 (8bit Bayer RAW - V4L2_PIX_FMT_SRGGB8 / - V4L2_PIX_FMT_SGRBG8 / V4L2_PIX_FMT_SGBRG8 / V4L2_PIX_FMT_SBGGR8); - - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / - V4L2_PIX_FMT_SGBRG10P / V4L2_PIX_FMT_SGRBG10P / V4L2_PIX_FMT_SRGGB10P); - - MIPI RAW12 (12bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB12P / - V4L2_PIX_FMT_SGBRG12P / V4L2_PIX_FMT_SGRBG12P / V4L2_PIX_FMT_SRGGB12P). + Supported formats: + + - YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY); + - MIPI RAW8 (8bit Bayer RAW - V4L2_PIX_FMT_SRGGB8 / + V4L2_PIX_FMT_SGRBG8 / V4L2_PIX_FMT_SGBRG8 / V4L2_PIX_FMT_SBGGR8); + - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / + V4L2_PIX_FMT_SGBRG10P / V4L2_PIX_FMT_SGRBG10P / V4L2_PIX_FMT_SRGGB10P / + V4L2_PIX_FMT_Y10P); + - MIPI RAW12 (12bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB12P / + V4L2_PIX_FMT_SGBRG12P / V4L2_PIX_FMT_SGRBG12P / V4L2_PIX_FMT_SRGGB12P). + - (8x96 only) MIPI RAW14 (14bit packed Bayer RAW - V4L2_PIX_FMT_SRGGB14P / + V4L2_PIX_FMT_SGBRG14P / V4L2_PIX_FMT_SGRBG14P / V4L2_PIX_FMT_SRGGB14P). + + - (8x96 only) Format conversion of the input data. + + Supported input formats: + + - MIPI RAW10 (10bit packed Bayer RAW - V4L2_PIX_FMT_SBGGR10P / V4L2_PIX_FMT_Y10P). + + Supported output formats: + + - Plain16 RAW10 (10bit unpacked Bayer RAW - V4L2_PIX_FMT_SBGGR10 / V4L2_PIX_FMT_Y10). - PIX interface of VFE @@ -75,14 +90,16 @@ The current version of the driver supports: - NV12/NV21 (two plane YUV 4:2:0 - V4L2_PIX_FMT_NV12 / V4L2_PIX_FMT_NV21); - NV16/NV61 (two plane YUV 4:2:2 - V4L2_PIX_FMT_NV16 / V4L2_PIX_FMT_NV61). + - (8x96 only) YUYV/UYVY/YVYU/VYUY (packed YUV 4:2:2 - V4L2_PIX_FMT_YUYV / + V4L2_PIX_FMT_UYVY / V4L2_PIX_FMT_YVYU / V4L2_PIX_FMT_VYUY). - Scaling support. Configuration of the VFE Encoder Scale module for downscalling with ratio up to 16x. - Cropping support. Configuration of the VFE Encoder Crop module. -- Concurrent and independent usage of two data inputs - could be camera sensors - and/or TG. +- Concurrent and independent usage of two (8x96: three) data inputs - + could be camera sensors and/or TG. Driver Architecture and Design @@ -90,14 +107,14 @@ Driver Architecture and Design The driver implements the V4L2 subdev interface. With the goal to model the hardware links between the modules and to expose a clean, logical and usable -interface, the driver is split into V4L2 sub-devices as follows: +interface, the driver is split into V4L2 sub-devices as follows (8x16 / 8x96): -- 2 CSIPHY sub-devices - each CSIPHY is represented by a single sub-device; -- 2 CSID sub-devices - each CSID is represented by a single sub-device; -- 2 ISPIF sub-devices - ISPIF is represented by a number of sub-devices equal - to the number of CSID sub-devices; -- 4 VFE sub-devices - VFE is represented by a number of sub-devices equal to - the number of the input interfaces (3 RDI and 1 PIX). +- 2 / 3 CSIPHY sub-devices - each CSIPHY is represented by a single sub-device; +- 2 / 4 CSID sub-devices - each CSID is represented by a single sub-device; +- 2 / 4 ISPIF sub-devices - ISPIF is represented by a number of sub-devices + equal to the number of CSID sub-devices; +- 4 / 8 VFE sub-devices - VFE is represented by a number of sub-devices equal to + the number of the input interfaces (3 RDI and 1 PIX for each VFE). The considerations to split the driver in this particular way are as follows: @@ -115,8 +132,8 @@ The considerations to split the driver in this particular way are as follows: Each VFE sub-device is linked to a separate video device node. -The media controller pipeline graph is as follows (with connected two OV5645 -camera sensors): +The media controller pipeline graph is as follows (with connected two / three +OV5645 camera sensors): .. _qcom_camss_graph: @@ -124,7 +141,13 @@ camera sensors): :alt: qcom_camss_graph.dot :align: center - Media pipeline graph + Media pipeline graph 8x16 + +.. kernel-figure:: qcom_camss_8x96_graph.dot + :alt: qcom_camss_8x96_graph.dot + :align: center + + Media pipeline graph 8x96 Implementation @@ -149,8 +172,12 @@ APQ8016 Specification: https://developer.qualcomm.com/download/sd410/snapdragon-410-processor-device-specification.pdf Referenced 2016-11-24. +APQ8096 Specification: +https://developer.qualcomm.com/download/sd820e/qualcomm-snapdragon-820e-processor-apq8096sge-device-specification.pdf +Referenced 2018-06-22. References ---------- .. [#f1] https://source.codeaurora.org/quic/la/kernel/msm-3.10/ +.. [#f2] https://source.codeaurora.org/quic/la/kernel/msm-3.18/ diff --git a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot new file mode 100644 index 000000000000..de34f0a7afdc --- /dev/null +++ b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot @@ -0,0 +1,104 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n0000000a:port0 [style=dashed] + n00000001:port1 -> n0000000d:port0 [style=dashed] + n00000001:port1 -> n00000010:port0 [style=dashed] + n00000001:port1 -> n00000013:port0 [style=dashed] + n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000004:port1 -> n0000000a:port0 [style=dashed] + n00000004:port1 -> n0000000d:port0 [style=dashed] + n00000004:port1 -> n00000010:port0 [style=dashed] + n00000004:port1 -> n00000013:port0 [style=dashed] + n00000007 [label="{{<port0> 0} | msm_csiphy2\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000007:port1 -> n0000000a:port0 [style=dashed] + n00000007:port1 -> n0000000d:port0 [style=dashed] + n00000007:port1 -> n00000010:port0 [style=dashed] + n00000007:port1 -> n00000013:port0 [style=dashed] + n0000000a [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000a:port1 -> n00000016:port0 [style=dashed] + n0000000a:port1 -> n00000019:port0 [style=dashed] + n0000000a:port1 -> n0000001c:port0 [style=dashed] + n0000000a:port1 -> n0000001f:port0 [style=dashed] + n0000000d [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000d:port1 -> n00000016:port0 [style=dashed] + n0000000d:port1 -> n00000019:port0 [style=dashed] + n0000000d:port1 -> n0000001c:port0 [style=dashed] + n0000000d:port1 -> n0000001f:port0 [style=dashed] + n00000010 [label="{{<port0> 0} | msm_csid2\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000010:port1 -> n00000016:port0 [style=dashed] + n00000010:port1 -> n00000019:port0 [style=dashed] + n00000010:port1 -> n0000001c:port0 [style=dashed] + n00000010:port1 -> n0000001f:port0 [style=dashed] + n00000013 [label="{{<port0> 0} | msm_csid3\n/dev/v4l-subdev6 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000013:port1 -> n00000016:port0 [style=dashed] + n00000013:port1 -> n00000019:port0 [style=dashed] + n00000013:port1 -> n0000001c:port0 [style=dashed] + n00000013:port1 -> n0000001f:port0 [style=dashed] + n00000016 [label="{{<port0> 0} | msm_ispif0\n/dev/v4l-subdev7 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000016:port1 -> n00000022:port0 [style=dashed] + n00000016:port1 -> n0000002b:port0 [style=dashed] + n00000016:port1 -> n00000034:port0 [style=dashed] + n00000016:port1 -> n0000003d:port0 [style=dashed] + n00000016:port1 -> n00000046:port0 [style=dashed] + n00000016:port1 -> n0000004f:port0 [style=dashed] + n00000016:port1 -> n00000058:port0 [style=dashed] + n00000016:port1 -> n00000061:port0 [style=dashed] + n00000019 [label="{{<port0> 0} | msm_ispif1\n/dev/v4l-subdev8 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000019:port1 -> n00000022:port0 [style=dashed] + n00000019:port1 -> n0000002b:port0 [style=dashed] + n00000019:port1 -> n00000034:port0 [style=dashed] + n00000019:port1 -> n0000003d:port0 [style=dashed] + n00000019:port1 -> n00000046:port0 [style=dashed] + n00000019:port1 -> n0000004f:port0 [style=dashed] + n00000019:port1 -> n00000058:port0 [style=dashed] + n00000019:port1 -> n00000061:port0 [style=dashed] + n0000001c [label="{{<port0> 0} | msm_ispif2\n/dev/v4l-subdev9 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001c:port1 -> n00000022:port0 [style=dashed] + n0000001c:port1 -> n0000002b:port0 [style=dashed] + n0000001c:port1 -> n00000034:port0 [style=dashed] + n0000001c:port1 -> n0000003d:port0 [style=dashed] + n0000001c:port1 -> n00000046:port0 [style=dashed] + n0000001c:port1 -> n0000004f:port0 [style=dashed] + n0000001c:port1 -> n00000058:port0 [style=dashed] + n0000001c:port1 -> n00000061:port0 [style=dashed] + n0000001f [label="{{<port0> 0} | msm_ispif3\n/dev/v4l-subdev10 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000001f:port1 -> n00000022:port0 [style=dashed] + n0000001f:port1 -> n0000002b:port0 [style=dashed] + n0000001f:port1 -> n00000034:port0 [style=dashed] + n0000001f:port1 -> n0000003d:port0 [style=dashed] + n0000001f:port1 -> n00000046:port0 [style=dashed] + n0000001f:port1 -> n0000004f:port0 [style=dashed] + n0000001f:port1 -> n00000058:port0 [style=dashed] + n0000001f:port1 -> n00000061:port0 [style=dashed] + n00000022 [label="{{<port0> 0} | msm_vfe0_rdi0\n/dev/v4l-subdev11 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000022:port1 -> n00000025 [style=bold] + n00000025 [label="msm_vfe0_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000002b [label="{{<port0> 0} | msm_vfe0_rdi1\n/dev/v4l-subdev12 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000002b:port1 -> n0000002e [style=bold] + n0000002e [label="msm_vfe0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000034 [label="{{<port0> 0} | msm_vfe0_rdi2\n/dev/v4l-subdev13 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000034:port1 -> n00000037 [style=bold] + n00000037 [label="msm_vfe0_video2\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n0000003d [label="{{<port0> 0} | msm_vfe0_pix\n/dev/v4l-subdev14 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000003d:port1 -> n00000040 [style=bold] + n00000040 [label="msm_vfe0_video3\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000046 [label="{{<port0> 0} | msm_vfe1_rdi0\n/dev/v4l-subdev15 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000046:port1 -> n00000049 [style=bold] + n00000049 [label="msm_vfe1_video0\n/dev/video4", shape=box, style=filled, fillcolor=yellow] + n0000004f [label="{{<port0> 0} | msm_vfe1_rdi1\n/dev/v4l-subdev16 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000004f:port1 -> n00000052 [style=bold] + n00000052 [label="msm_vfe1_video1\n/dev/video5", shape=box, style=filled, fillcolor=yellow] + n00000058 [label="{{<port0> 0} | msm_vfe1_rdi2\n/dev/v4l-subdev17 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000058:port1 -> n0000005b [style=bold] + n0000005b [label="msm_vfe1_video2\n/dev/video6", shape=box, style=filled, fillcolor=yellow] + n00000061 [label="{{<port0> 0} | msm_vfe1_pix\n/dev/v4l-subdev18 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000061:port1 -> n00000064 [style=bold] + n00000064 [label="msm_vfe1_video3\n/dev/video7", shape=box, style=filled, fillcolor=yellow] + n000000e2 [label="{{} | ov5645 3-0039\n/dev/v4l-subdev19 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n000000e2:port0 -> n00000004:port0 [style=bold] + n000000e4 [label="{{} | ov5645 3-003a\n/dev/v4l-subdev20 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n000000e4:port0 -> n00000007:port0 [style=bold] + n000000e6 [label="{{} | ov5645 3-003b\n/dev/v4l-subdev21 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n000000e6:port0 -> n00000001:port0 [style=bold] +} diff --git a/Documentation/media/video.h.rst.exceptions b/Documentation/media/video.h.rst.exceptions index a91aa884ce0e..371cdbd7d062 100644 --- a/Documentation/media/video.h.rst.exceptions +++ b/Documentation/media/video.h.rst.exceptions @@ -34,7 +34,4 @@ replace typedef video_displayformat_t :c:type:`video_displayformat` replace typedef video_size_t :c:type:`video_size` replace typedef video_stream_source_t :c:type:`video_stream_source` replace typedef video_play_state_t :c:type:`video_play_state` -replace typedef video_highlight_t :c:type:`video_highlight` -replace typedef video_spu_t :c:type:`video_spu` -replace typedef video_spu_palette_t :c:type:`video_spu_palette` replace typedef video_navi_pack_t :c:type:`video_navi_pack` diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions index a5cb0a8686ac..ca9f0edc579e 100644 --- a/Documentation/media/videodev2.h.rst.exceptions +++ b/Documentation/media/videodev2.h.rst.exceptions @@ -517,7 +517,6 @@ ignore define V4L2_CTRL_WHICH_DEF_VAL ignore define V4L2_OUT_CAP_CUSTOM_TIMINGS ignore define V4L2_CID_MAX_CTRLS -ignore ioctl VIDIOC_RESERVED ignore define BASE_VIDIOC_PRIVATE # Associate ioctls with their counterparts |