summaryrefslogtreecommitdiffstats
path: root/Documentation/intel_txt.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/intel_txt.txt')
-rw-r--r--Documentation/intel_txt.txt63
1 files changed, 40 insertions, 23 deletions
diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt
index 91d89c540709..d83c1a2122c9 100644
--- a/Documentation/intel_txt.txt
+++ b/Documentation/intel_txt.txt
@@ -1,4 +1,5 @@
-Intel(R) TXT Overview:
+=====================
+Intel(R) TXT Overview
=====================
Intel's technology for safer computing, Intel(R) Trusted Execution
@@ -8,9 +9,10 @@ provide the building blocks for creating trusted platforms.
Intel TXT was formerly known by the code name LaGrande Technology (LT).
Intel TXT in Brief:
-o Provides dynamic root of trust for measurement (DRTM)
-o Data protection in case of improper shutdown
-o Measurement and verification of launched environment
+
+- Provides dynamic root of trust for measurement (DRTM)
+- Data protection in case of improper shutdown
+- Measurement and verification of launched environment
Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems. It is currently available on desktop systems
@@ -24,16 +26,21 @@ which has been updated for the new released platforms.
Intel TXT has been presented at various events over the past few
years, some of which are:
- LinuxTAG 2008:
+
+ - LinuxTAG 2008:
http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag.html
- TRUST2008:
+
+ - TRUST2008:
http://www.trust-conference.eu/downloads/Keynote-Speakers/
3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
- IDF, Shanghai:
+
+ - IDF, Shanghai:
http://www.prcidf.com.cn/index_en.html
- IDFs 2006, 2007 (I'm not sure if/where they are online)
-Trusted Boot Project Overview:
+ - IDFs 2006, 2007
+ (I'm not sure if/where they are online)
+
+Trusted Boot Project Overview
=============================
Trusted Boot (tboot) is an open source, pre-kernel/VMM module that
@@ -87,11 +94,12 @@ Intel-provided firmware).
How Does it Work?
=================
-o Tboot is an executable that is launched by the bootloader as
+- Tboot is an executable that is launched by the bootloader as
the "kernel" (the binary the bootloader executes).
-o It performs all of the work necessary to determine if the
+- It performs all of the work necessary to determine if the
platform supports Intel TXT and, if so, executes the GETSEC[SENTER]
processor instruction that initiates the dynamic root of trust.
+
- If tboot determines that the system does not support Intel TXT
or is not configured correctly (e.g. the SINIT AC Module was
incorrect), it will directly launch the kernel with no changes
@@ -99,12 +107,14 @@ o It performs all of the work necessary to determine if the
- Tboot will output various information about its progress to the
terminal, serial port, and/or an in-memory log; the output
locations can be configured with a command line switch.
-o The GETSEC[SENTER] instruction will return control to tboot and
+
+- The GETSEC[SENTER] instruction will return control to tboot and
tboot then verifies certain aspects of the environment (e.g. TPM NV
lock, e820 table does not have invalid entries, etc.).
-o It will wake the APs from the special sleep state the GETSEC[SENTER]
+- It will wake the APs from the special sleep state the GETSEC[SENTER]
instruction had put them in and place them into a wait-for-SIPI
state.
+
- Because the processors will not respond to an INIT or SIPI when
in the TXT environment, it is necessary to create a small VT-x
guest for the APs. When they run in this guest, they will
@@ -112,8 +122,10 @@ o It will wake the APs from the special sleep state the GETSEC[SENTER]
VMEXITs, and then disable VT and jump to the SIPI vector. This
approach seemed like a better choice than having to insert
special code into the kernel's MP wakeup sequence.
-o Tboot then applies an (optional) user-defined launch policy to
+
+- Tboot then applies an (optional) user-defined launch policy to
verify the kernel and initrd.
+
- This policy is rooted in TPM NV and is described in the tboot
project. The tboot project also contains code for tools to
create and provision the policy.
@@ -121,30 +133,34 @@ o Tboot then applies an (optional) user-defined launch policy to
then any kernel will be launched.
- Policy action is flexible and can include halting on failures
or simply logging them and continuing.
-o Tboot adjusts the e820 table provided by the bootloader to reserve
+
+- Tboot adjusts the e820 table provided by the bootloader to reserve
its own location in memory as well as to reserve certain other
TXT-related regions.
-o As part of its launch, tboot DMA protects all of RAM (using the
+- As part of its launch, tboot DMA protects all of RAM (using the
VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on'
in order to remove this blanket protection and use VT-d's
page-level protection.
-o Tboot will populate a shared page with some data about itself and
+- Tboot will populate a shared page with some data about itself and
pass this to the Linux kernel as it transfers control.
+
- The location of the shared page is passed via the boot_params
struct as a physical address.
-o The kernel will look for the tboot shared page address and, if it
+
+- The kernel will look for the tboot shared page address and, if it
exists, map it.
-o As one of the checks/protections provided by TXT, it makes a copy
+- As one of the checks/protections provided by TXT, it makes a copy
of the VT-d DMARs in a DMA-protected region of memory and verifies
them for correctness. The VT-d code will detect if the kernel was
launched with tboot and use this copy instead of the one in the
ACPI table.
-o At this point, tboot and TXT are out of the picture until a
+- At this point, tboot and TXT are out of the picture until a
shutdown (S<n>)
-o In order to put a system into any of the sleep states after a TXT
+- In order to put a system into any of the sleep states after a TXT
launch, TXT must first be exited. This is to prevent attacks that
attempt to crash the system to gain control on reboot and steal
data left in memory.
+
- The kernel will perform all of its sleep preparation and
populate the shared page with the ACPI data needed to put the
platform in the desired sleep state.
@@ -172,7 +188,7 @@ o In order to put a system into any of the sleep states after a TXT
That's pretty much it for TXT support.
-Configuring the System:
+Configuring the System
======================
This code works with 32bit, 32bit PAE, and 64bit (x86_64) kernels.
@@ -181,7 +197,8 @@ In BIOS, the user must enable: TPM, TXT, VT-x, VT-d. Not all BIOSes
allow these to be individually enabled/disabled and the screens in
which to find them are BIOS-specific.
-grub.conf needs to be modified as follows:
+grub.conf needs to be modified as follows::
+
title Linux 2.6.29-tip w/ tboot
root (hd0,0)
kernel /tboot.gz logging=serial,vga,memory