diff options
Diffstat (limited to 'Documentation/hwmon/zl6100.rst')
| -rw-r--r-- | Documentation/hwmon/zl6100.rst | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/Documentation/hwmon/zl6100.rst b/Documentation/hwmon/zl6100.rst new file mode 100644 index 000000000000..41513bb7fe51 --- /dev/null +++ b/Documentation/hwmon/zl6100.rst @@ -0,0 +1,213 @@ +Kernel driver zl6100 +==================== + +Supported chips: + + * Intersil / Zilker Labs ZL2004 + + Prefix: 'zl2004' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6847.pdf + + * Intersil / Zilker Labs ZL2005 + + Prefix: 'zl2005' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6848.pdf + + * Intersil / Zilker Labs ZL2006 + + Prefix: 'zl2006' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6850.pdf + + * Intersil / Zilker Labs ZL2008 + + Prefix: 'zl2008' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6859.pdf + + * Intersil / Zilker Labs ZL2105 + + Prefix: 'zl2105' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6851.pdf + + * Intersil / Zilker Labs ZL2106 + + Prefix: 'zl2106' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6852.pdf + + * Intersil / Zilker Labs ZL6100 + + Prefix: 'zl6100' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6876.pdf + + * Intersil / Zilker Labs ZL6105 + + Prefix: 'zl6105' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn6906.pdf + + * Intersil / Zilker Labs ZL9101M + + Prefix: 'zl9101' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn7669.pdf + + * Intersil / Zilker Labs ZL9117M + + Prefix: 'zl9117' + + Addresses scanned: - + + Datasheet: http://www.intersil.com/data/fn/fn7914.pdf + + * Ericsson BMR450, BMR451 + + Prefix: 'bmr450', 'bmr451' + + Addresses scanned: - + + Datasheet: + +http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401 + + * Ericsson BMR462, BMR463, BMR464 + + Prefixes: 'bmr462', 'bmr463', 'bmr464' + + Addresses scanned: - + + Datasheet: + + http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256 + +Author: Guenter Roeck <linux@roeck-us.net> + + +Description +----------- + +This driver supports hardware monitoring for Intersil / Zilker Labs ZL6100 and +compatible digital DC-DC controllers. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details +on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + +.. warning:: + + Do not access chip registers using the i2cdump command, and do not use + any of the i2ctools commands on a command register used to save and restore + configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by + this driver interpret any access to those command registers (including read + commands) as request to execute the command in question. Unless write accesses + to those registers are protected, this may result in power loss, board resets, + and/or Flash corruption. Worst case, your board may turn into a brick. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Module parameters +----------------- + +delay +----- + +Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C +bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms +appears to be sufficient and has not caused any problems in testing. The problem +is known to affect all currently supported chips. For manual override, the +driver provides a writeable module parameter, 'delay', which can be used to set +the interval to a value between 0 and 65,535 microseconds. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +======================= ======================================================== +in1_label "vin" +in1_input Measured input voltage. +in1_min Minimum input voltage. +in1_max Maximum input voltage. +in1_lcrit Critical minimum input voltage. +in1_crit Critical maximum input voltage. +in1_min_alarm Input voltage low alarm. +in1_max_alarm Input voltage high alarm. +in1_lcrit_alarm Input voltage critical low alarm. +in1_crit_alarm Input voltage critical high alarm. + +in2_label "vmon" +in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M, + ZL9117M) pin. Reported voltage is 16x the voltage on the + pin (adjusted internally by the chip). +in2_lcrit Critical minimum VMON/VDRV Voltage. +in2_crit Critical maximum VMON/VDRV voltage. +in2_lcrit_alarm VMON/VDRV voltage critical low alarm. +in2_crit_alarm VMON/VDRV voltage critical high alarm. + + vmon attributes are supported on ZL2004, ZL9101M, + and ZL9117M only. + +inX_label "vout1" +inX_input Measured output voltage. +inX_lcrit Critical minimum output Voltage. +inX_crit Critical maximum output voltage. +inX_lcrit_alarm Critical output voltage critical low alarm. +inX_crit_alarm Critical output voltage critical high alarm. + + X is 3 for ZL2004, ZL9101M, and ZL9117M, 2 otherwise. + +curr1_label "iout1" +curr1_input Measured output current. +curr1_lcrit Critical minimum output current. +curr1_crit Critical maximum output current. +curr1_lcrit_alarm Output current critical low alarm. +curr1_crit_alarm Output current critical high alarm. + +temp[12]_input Measured temperature. +temp[12]_min Minimum temperature. +temp[12]_max Maximum temperature. +temp[12]_lcrit Critical low temperature. +temp[12]_crit Critical high temperature. +temp[12]_min_alarm Chip temperature low alarm. +temp[12]_max_alarm Chip temperature high alarm. +temp[12]_lcrit_alarm Chip temperature critical low alarm. +temp[12]_crit_alarm Chip temperature critical high alarm. +======================= ======================================================== |