6 files changed, 25 insertions, 7 deletions
diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb
index c8238e44ed6b..c4d963a67d6f 100644
--- a/Documentation/dvb/README.dvb-usb
+++ b/Documentation/dvb/README.dvb-usb
@@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged
 in the device).
 
 If you want to enable debug output, you have to load the driver manually and
-from withing the dvb-kernel cvs repository.
+from within the dvb-kernel cvs repository.
 
 first have a look, which debug level are available:
 
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
index 4a0c2b56e690..6c3bda50f7dc 100644
--- a/Documentation/dvb/ci.txt
+++ b/Documentation/dvb/ci.txt
@@ -47,7 +47,7 @@ so on.
 
 * CI modules that are supported
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The CI module support is largely dependant upon the firmware on the cards
+The CI module support is largely dependent upon the firmware on the cards
 Some cards do support almost all of the available CI modules. There is
 nothing much that can be done in order to make additional CI modules
 working with these cards.
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index 121832e5d899..97b1373f2428 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb
 5. The dvb_net device doesn't give me any packets at all
 
 	Run tcpdump on the dvb0_0 interface. This sets the interface
-	into promiscous mode so it accepts any packets from the PID
+	into promiscuous mode so it accepts any packets from the PID
 	you have configured with the dvbnet utility. Check if there
 	are any packets with the IP addr and MAC addr you have
 	configured with ifconfig.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 59690de8ebfe..3348d313fbe0 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -556,6 +556,9 @@ sub ngene {
     my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
     my $file2 = "ngene_17.fw";
     my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
+    my $url2 = "http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/";
+    my $file3 = "ngene_18.fw";
+    my $hash3 = "ebce3ea769a53e3e0b0197c3b3f127e3";
 
     checkstandard();
 
@@ -565,7 +568,10 @@ sub ngene {
     wgetfile($file2, $url . $file2);
     verify($file2, $hash2);
 
-    "$file1, $file2";
+    wgetfile($file3, $url2 . $file3);
+    verify($file3, $hash3);
+
+    "$file1, $file2, $file3";
 }
 
 sub az6027{
diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt
index 641886504201..10b5f0411386 100644
--- a/Documentation/dvb/lmedm04.txt
+++ b/Documentation/dvb/lmedm04.txt
@@ -4,7 +4,7 @@ following file(s) to this directory.
 for DM04+/QQBOX LME2510C (Sharp 7395 Tuner)
 -------------------------------------------
 
-The Sharp 7395 driver can be found in windows/system32/driver
+The Sharp 7395 driver can be found in windows/system32/drivers
 
 US2A0D.sys (dated 17 Mar 2009)
 
@@ -44,7 +44,7 @@ and run
 
 
 Other LG firmware can be extracted manually from US280D.sys
-only found in windows/system32/driver.
+only found in windows/system32/drivers
 
 dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw
 
@@ -55,4 +55,16 @@ dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw
 
 ---------------------------------------------------------------------
 
+The Sharp 0194 tuner driver can be found in windows/system32/drivers
+
+US290D.sys (dated 09 Apr 2009)
+
+For LME2510
+dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw
+
+
+For LME2510C
+dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw
+
+
 Copy the firmware file(s) to /lib/firmware
diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt
index 68ee224b6aae..412305b7c557 100644
--- a/Documentation/dvb/udev.txt
+++ b/Documentation/dvb/udev.txt
@@ -1,7 +1,7 @@
 The DVB subsystem currently registers to the sysfs subsystem using the
 "class_simple" interface.
 
-This means that only the basic informations like module loading parameters
+This means that only the basic information like module loading parameters
 are presented through sysfs. Other things that might be interesting are
 currently *not* available.