summaryrefslogtreecommitdiffstats
path: root/Documentation/dmaengine
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/dmaengine')
-rw-r--r--Documentation/dmaengine/dmatest.txt92
1 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/dmaengine/dmatest.txt b/Documentation/dmaengine/dmatest.txt
new file mode 100644
index 000000000000..dd77a81bdb80
--- /dev/null
+++ b/Documentation/dmaengine/dmatest.txt
@@ -0,0 +1,92 @@
+ DMA Test Guide
+ ==============
+
+ Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+This small document introduces how to test DMA drivers using dmatest module.
+
+ Part 1 - How to build the test module
+
+The menuconfig contains an option that could be found by following path:
+ Device Drivers -> DMA Engine support -> DMA Test client
+
+In the configuration file the option called CONFIG_DMATEST. The dmatest could
+be built as module or inside kernel. Let's consider those cases.
+
+ Part 2 - When dmatest is built as a module...
+
+Example of usage:
+ % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
+
+...or:
+ % modprobe dmatest
+ % echo dma0chan0 > /sys/module/dmatest/parameters/channel
+ % echo 2000 > /sys/module/dmatest/parameters/timeout
+ % echo 1 > /sys/module/dmatest/parameters/iterations
+ % echo 1 > /sys/module/dmatest/parameters/run
+
+...or on the kernel command line:
+
+ dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
+
+Hint: available channel list could be extracted by running the following
+command:
+ % ls -1 /sys/class/dma/
+
+Once started a message like "dmatest: Started 1 threads using dma0chan0" is
+emitted. After that only test failure messages are reported until the test
+stops.
+
+Note that running a new test will not stop any in progress test.
+
+The following command returns the state of the test.
+ % cat /sys/module/dmatest/parameters/run
+
+To wait for test completion userpace can poll 'run' until it is false, or use
+the wait parameter. Specifying 'wait=1' when loading the module causes module
+initialization to pause until a test run has completed, while reading
+/sys/module/dmatest/parameters/wait waits for any running test to complete
+before returning. For example, the following scripts wait for 42 tests
+to complete before exiting. Note that if 'iterations' is set to 'infinite' then
+waiting is disabled.
+
+Example:
+ % modprobe dmatest run=1 iterations=42 wait=1
+ % modprobe -r dmatest
+...or:
+ % modprobe dmatest run=1 iterations=42
+ % cat /sys/module/dmatest/parameters/wait
+ % modprobe -r dmatest
+
+ Part 3 - When built-in in the kernel...
+
+The module parameters that is supplied to the kernel command line will be used
+for the first performed test. After user gets a control, the test could be
+re-run with the same or different parameters. For the details see the above
+section "Part 2 - When dmatest is built as a module..."
+
+In both cases the module parameters are used as the actual values for the test
+case. You always could check them at run-time by running
+ % grep -H . /sys/module/dmatest/parameters/*
+
+ Part 4 - Gathering the test results
+
+Test results are printed to the kernel log buffer with the format:
+
+"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
+
+Example of output:
+ % dmesg | tail -n 1
+ dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
+
+The message format is unified across the different types of errors. A number in
+the parens represents additional information, e.g. error code, error counter,
+or status. A test thread also emits a summary line at completion listing the
+number of tests executed, number that failed, and a result code.
+
+Example:
+ % dmesg | tail -n 1
+ dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
+
+The details of a data miscompare error are also emitted, but do not follow the
+above format.