diff options
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r-- | Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/net/ieee802154/adf7242.txt | 2 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/net/phy.txt | 2 |
3 files changed, 9 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 56d6cc336e1c..bfc0c433654f 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -18,6 +18,12 @@ Optional properties: - xceiver-supply: Regulator that powers the CAN transceiver +- big-endian: This means the registers of FlexCAN controller are big endian. + This is optional property.i.e. if this property is not present in + device tree node then controller is assumed to be little endian. + if this property is present then controller is assumed to be big + endian. + Example: can@1c000 { diff --git a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt index dea5124cdc52..d24172cc6d32 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt @@ -1,7 +1,7 @@ * ADF7242 IEEE 802.15.4 * Required properties: - - compatible: should be "adi,adf7242" + - compatible: should be "adi,adf7242", "adi,adf7241" - spi-max-frequency: maximal bus speed (12.5 MHz) - reg: the chipselect index - interrupts: the interrupt generated by the device via pin IRQ1. diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 77d0b2a61ffa..c05479f5ac7c 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -53,6 +53,8 @@ Optional Properties: to ensure the integrated PHY is used. The absence of this property indicates the muxers should be configured so that the external PHY is used. +- reset-gpios: The GPIO phandle and specifier for the PHY reset signal. + Example: ethernet-phy@0 { |