summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/Makefile2
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/armadeus.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-sysregs.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/bhf.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/bitmain.yaml18
-rw-r--r--Documentation/devicetree/bindings/arm/compulab-boards.txt25
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.yaml1
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt16
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt15
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt237
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml232
-rw-r--r--Documentation/devicetree/bindings/arm/i2se.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.txt114
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.yaml248
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/olimex.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/pmu.txt70
-rw-r--r--Documentation/devicetree/bindings/arm/pmu.yaml87
-rw-r--r--Documentation/devicetree/bindings/arm/renesas.yaml238
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml17
-rw-r--r--Documentation/devicetree/bindings/arm/shmobile.txt155
-rw-r--r--Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml22
-rw-r--r--Documentation/devicetree/bindings/arm/technologic.txt23
-rw-r--r--Documentation/devicetree/bindings/arm/tegra.yaml2
-rw-r--r--Documentation/devicetree/bindings/bus/imx-weim.txt32
-rw-r--r--Documentation/devicetree/bindings/clock/actions,owl-cmu.txt7
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5433-clock.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-clock.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-clock.yaml44
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-factor-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml56
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/imx8mm-clock.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt83
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,rpmcc.txt1
-rw-r--r--Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt6
-rw-r--r--Documentation/devicetree/bindings/crypto/samsung-slimsss.txt19
-rw-r--r--Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt33
-rw-r--r--Documentation/devicetree/bindings/display/arm,komeda.txt73
-rw-r--r--Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt21
-rw-r--r--Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt12
-rw-r--r--Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt4
-rw-r--r--Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt2
-rw-r--r--Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt55
-rw-r--r--Documentation/devicetree/bindings/display/msm/gmu.txt59
-rw-r--r--Documentation/devicetree/bindings/display/msm/gpu.txt42
-rw-r--r--Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt (renamed from Documentation/devicetree/bindings/display/panel/auo,g101evn010)0
-rw-r--r--Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt12
-rw-r--r--Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt14
-rw-r--r--Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt30
-rw-r--r--Documentation/devicetree/bindings/display/renesas,du.txt2
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt1
-rw-r--r--Documentation/devicetree/bindings/display/sitronix,st7735r.txt2
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt5
-rw-r--r--Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt3
-rw-r--r--Documentation/devicetree/bindings/dma/dma.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-qdma.txt57
-rw-r--r--Documentation/devicetree/bindings/dma/k3dma.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/snps-dma.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/sprd-dma.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt7
-rw-r--r--Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt25
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.txt3
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt27
-rw-r--r--Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt1
-rw-r--r--Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt35
-rw-r--r--Documentation/devicetree/bindings/gnss/gnss.txt1
-rw-r--r--Documentation/devicetree/bindings/gnss/mediatek.txt35
-rw-r--r--Documentation/devicetree/bindings/gnss/sirfstar.txt1
-rw-r--r--Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt20
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt4
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-pca953x.txt1
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio.txt12
-rw-r--r--Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt38
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt6
-rw-r--r--Documentation/devicetree/bindings/gpu/samsung-rotator.txt7
-rw-r--r--Documentation/devicetree/bindings/hwmon/ad741x.txt15
-rw-r--r--Documentation/devicetree/bindings/hwmon/dps650ab.txt11
-rw-r--r--Documentation/devicetree/bindings/hwmon/hih6130.txt12
-rw-r--r--Documentation/devicetree/bindings/hwmon/ina3221.txt10
-rw-r--r--Documentation/devicetree/bindings/hwmon/lm75.txt37
-rw-r--r--Documentation/devicetree/bindings/hwmon/pwm-fan.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mtk.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-xscale.txt20
-rw-r--r--Documentation/devicetree/bindings/iio/accel/mma8452.txt4
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt65
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt41
-rw-r--r--Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt4
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt48
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt (renamed from Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt)0
-rw-r--r--Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt24
-rw-r--r--Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt4
-rw-r--r--Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt21
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt25
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/bme680.txt11
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt20
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt15
-rw-r--r--Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt12
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt28
-rw-r--r--Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt26
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bmi160.txt6
-rw-r--r--Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/light/max44009.txt24
-rw-r--r--Documentation/devicetree/bindings/iio/st-sensors.txt1
-rw-r--r--Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt9
-rw-r--r--Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt25
-rw-r--r--Documentation/devicetree/bindings/input/msm-vibrator.txt36
-rw-r--r--Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt28
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt13
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix.txt14
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt8
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/stmpe.txt116
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sx8654.txt10
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt8
-rw-r--r--Documentation/devicetree/bindings/interconnect/interconnect.txt60
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt24
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt175
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml279
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt171
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml223
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt11
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt24
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt1
-rw-r--r--Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt14
-rw-r--r--Documentation/devicetree/bindings/leds/common.txt12
-rw-r--r--Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt49
-rw-r--r--Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt127
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adv748x.txt11
-rw-r--r--Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt20
-rw-r--r--Documentation/devicetree/bindings/media/i2c/mt9m001.txt38
-rw-r--r--Documentation/devicetree/bindings/media/i2c/ov5645.txt6
-rw-r--r--Documentation/devicetree/bindings/media/imx7-csi.txt45
-rw-r--r--Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt90
-rw-r--r--Documentation/devicetree/bindings/media/mediatek-vcodec.txt13
-rw-r--r--Documentation/devicetree/bindings/media/rcar_vin.txt9
-rw-r--r--Documentation/devicetree/bindings/media/renesas,fcp.txt5
-rw-r--r--Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt3
-rw-r--r--Documentation/devicetree/bindings/media/renesas,vsp1.txt6
-rw-r--r--Documentation/devicetree/bindings/media/si470x.txt26
-rw-r--r--Documentation/devicetree/bindings/media/sun6i-csi.txt3
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt27
-rw-r--r--Documentation/devicetree/bindings/mfd/aspeed-lpc.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt68
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt17
-rw-r--r--Documentation/devicetree/bindings/mfd/st,stpmic1.txt61
-rw-r--r--Documentation/devicetree/bindings/mfd/stmpe.txt28
-rw-r--r--Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt36
-rw-r--r--Documentation/devicetree/bindings/mips/lantiq/rcu.txt18
-rw-r--r--Documentation/devicetree/bindings/misc/qcom,fastrpc.txt78
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt6
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap.txt28
-rw-r--r--Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt60
-rw-r--r--Documentation/devicetree/bindings/mtd/cadence-quadspi.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/mtk-quadspi.txt3
-rw-r--r--Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt61
-rw-r--r--Documentation/devicetree/bindings/net/btusb.txt3
-rw-r--r--Documentation/devicetree/bindings/net/cpsw-phy-sel.txt2
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt5
-rw-r--r--Documentation/devicetree/bindings/net/dsa/ksz.txt145
-rw-r--r--Documentation/devicetree/bindings/net/dsa/mt7530.txt6
-rw-r--r--Documentation/devicetree/bindings/net/fsl-enetc.txt69
-rw-r--r--Documentation/devicetree/bindings/net/macb.txt4
-rw-r--r--Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt2
-rw-r--r--Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt82
-rw-r--r--Documentation/devicetree/bindings/net/mediatek-bluetooth.txt64
-rw-r--r--Documentation/devicetree/bindings/net/nixge.txt72
-rw-r--r--Documentation/devicetree/bindings/net/qcom,ethqos.txt64
-rw-r--r--Documentation/devicetree/bindings/net/stm32-dwmac.txt9
-rw-r--r--Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt19
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-ocotp.txt4
-rw-r--r--Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt46
-rw-r--r--Documentation/devicetree/bindings/opp/opp.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/altera-pcie.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt18
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pci.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt11
-rw-r--r--Documentation/devicetree/bindings/phy/cdns,dphy.txt20
-rw-r--r--Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt40
-rw-r--r--Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt65
-rw-r--r--Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt38
-rw-r--r--Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt2
-rw-r--r--Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt9
-rw-r--r--Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt2
-rw-r--r--Documentation/devicetree/bindings/phy/ti-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt27
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt32
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt36
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt24
-rw-r--r--Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt10
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt1
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt3
-rw-r--r--Documentation/devicetree/bindings/power/qcom,rpmpd.txt145
-rw-r--r--Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt25
-rw-r--r--Documentation/devicetree/bindings/power/supply/battery.txt2
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt8
-rw-r--r--Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt34
-rw-r--r--Documentation/devicetree/bindings/property-units.txt1
-rw-r--r--Documentation/devicetree/bindings/ptp/ptp-qoriq.txt5
-rw-r--r--Documentation/devicetree/bindings/pwm/atmel-pwm.txt1
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-hibvt.txt2
-rw-r--r--Documentation/devicetree/bindings/regulator/fan53555.txt3
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.txt35
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.yaml67
-rw-r--r--Documentation/devicetree/bindings/regulator/max77650-regulator.txt41
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.txt2
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt68
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt38
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt6
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65218.txt9
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt5
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt23
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt79
-rw-r--r--Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt27
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx7-src.txt7
-rw-r--r--Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt52
-rw-r--r--Documentation/devicetree/bindings/rtc/abracon,abx80x.txt1
-rw-r--r--Documentation/devicetree/bindings/rtc/cdns,rtc.txt25
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl1208.txt38
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl1219.txt29
-rw-r--r--Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt18
-rw-r--r--Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt18
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-meson.txt35
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc.txt23
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/milbeaut-uart.txt21
-rw-r--r--Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt35
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.txt51
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.yaml126
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt76
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml140
-rw-r--r--Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt2
-rw-r--r--Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt46
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt1
-rw-r--r--Documentation/devicetree/bindings/sound/adi,adau1977.txt13
-rw-r--r--Documentation/devicetree/bindings/sound/ak4458.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt123
-rw-r--r--Documentation/devicetree/bindings/sound/cs35l36.txt168
-rw-r--r--Documentation/devicetree/bindings/sound/cs4341.txt22
-rw-r--r--Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,micfil.txt32
-rw-r--r--Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt26
-rw-r--r--Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt20
-rw-r--r--Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt20
-rw-r--r--Documentation/devicetree/bindings/sound/mt6358.txt18
-rw-r--r--Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt36
-rw-r--r--Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt24
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt5
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,wcd9335.txt10
-rw-r--r--Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt23
-rw-r--r--Documentation/devicetree/bindings/sound/sgtl5000.txt9
-rw-r--r--Documentation/devicetree/bindings/sound/simple-scu-card.txt94
-rw-r--r--Documentation/devicetree/bindings/sound/sprd-pcm.txt23
-rw-r--r--Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt29
-rw-r--r--Documentation/devicetree/bindings/sound/xlnx,spdif.txt28
-rw-r--r--Documentation/devicetree/bindings/spi/atmel-quadspi.txt12
-rw-r--r--Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt (renamed from Documentation/devicetree/bindings/mtd/fsl-quadspi.txt)18
-rw-r--r--Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt39
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sifive.txt37
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sprd.txt7
-rw-r--r--Documentation/devicetree/bindings/spi/spi-stm32.txt9
-rw-r--r--Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt24
-rw-r--r--Documentation/devicetree/bindings/sram/sunxi-sram.txt1
-rw-r--r--Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt105
-rw-r--r--Documentation/devicetree/bindings/thermal/mediatek-thermal.txt1
-rw-r--r--Documentation/devicetree/bindings/timer/fsl,imxgpt.txt39
-rw-r--r--Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt11
-rw-r--r--Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt36
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,tmu.txt1
-rw-r--r--Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt17
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.yaml2
-rw-r--r--Documentation/devicetree/bindings/ufs/ufs-hisi.txt5
-rw-r--r--Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt13
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt24
-rw-r--r--Documentation/devicetree/bindings/usb/keystone-usb.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usb3.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usbhs.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.txt4
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt13
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas-wdt.txt1
-rw-r--r--Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt11
298 files changed, 6960 insertions, 1903 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 50daa0b3b032..63b139f9ae28 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -15,7 +15,7 @@ DT_TMP_SCHEMA := processed-schema.yaml
extra-y += $(DT_TMP_SCHEMA)
quiet_cmd_mk_schema = SCHEMA $@
- cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^)
+ cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
DT_DOCS = $(shell \
cd $(srctree)/$(src) && \
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 8dbc259081e4..7f40cb5f490b 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,s400" (Meson axg a113d)
- "amlogic,u200" (Meson g12a s905d2)
+ - "amediatech,x96-max" (Meson g12a s905x2)
Amlogic Meson Firmware registers Interface
------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/armadeus.txt b/Documentation/devicetree/bindings/arm/armadeus.txt
deleted file mode 100644
index 9821283ff516..000000000000
--- a/Documentation/devicetree/bindings/arm/armadeus.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-Armadeus i.MX Platforms Device Tree Bindings
------------------------------------------------
-
-APF51: i.MX51 based module.
-Required root node properties:
- - compatible = "armadeus,imx51-apf51", "fsl,imx51";
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 14f319f694b7..e61d00e25b95 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -21,7 +21,8 @@ Its subnodes can be:
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
+ <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
+ it also can be "microchip,sam9x60-rstc"
- reg: Should contain registers location and length
- clocks: phandle to input clock.
@@ -147,6 +148,7 @@ required properties:
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
"atmel,<chip>-sfrbu", "syscon"
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
+ It also can be "microchip,sam9x60-sfr", "syscon".
- reg: Should contain registers location and length
sfr@f0038000 {
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
index 0dcc3ea5adff..245328f36580 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
Required root node properties:
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+Raspberry Pi 3 Model A+
+Required root node properties:
+compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+
Raspberry Pi 3 Model B
Required root node properties:
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
diff --git a/Documentation/devicetree/bindings/arm/bhf.txt b/Documentation/devicetree/bindings/arm/bhf.txt
deleted file mode 100644
index 886b503caf9c..000000000000
--- a/Documentation/devicetree/bindings/arm/bhf.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-Beckhoff Automation Platforms Device Tree Bindings
---------------------------------------------------
-
-CX9020 Embedded PC
-Required root node properties:
- - compatible = "bhf,cx9020", "fsl,imx53";
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
new file mode 100644
index 000000000000..0efdb4ac028e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bitmain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain platform device tree bindings
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - bitmain,sophon-edge
+ - const: bitmain,bm1880
+...
diff --git a/Documentation/devicetree/bindings/arm/compulab-boards.txt b/Documentation/devicetree/bindings/arm/compulab-boards.txt
deleted file mode 100644
index 42a10285af9c..000000000000
--- a/Documentation/devicetree/bindings/arm/compulab-boards.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-CompuLab SB-SOM is a multi-module baseboard capable of carrying:
- - CM-T43
- - CM-T54
- - CM-QS600
- - CL-SOM-AM57x
- - CL-SOM-iMX7
-modules with minor modifications to the SB-SOM assembly.
-
-Required root node properties:
- - compatible = should be "compulab,sb-som"
-
-Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
-Freescale i.MX7 ARM Cortex-A7 System-on-Chip.
-
-Required root node properties:
- - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
-
-Compulab SBC-iMX7 is a single board computer based on the
-Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
-the CL-SOM-iMX7 System-on-Module providing most of the functions,
-and SB-SOM-iMX7 carrier board providing additional peripheral
-functions and connectors.
-
-Required root node properties:
- - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 298c17b327c6..365dcf384d73 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -228,6 +228,7 @@ patternProperties:
- renesas,r9a06g032-smp
- rockchip,rk3036-smp
- rockchip,rk3066-smp
+ - socionext,milbeaut-m10v-smp
- ste,dbx500-smp
cpu-release-addr:
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt
new file mode 100644
index 000000000000..7d0c7f002401
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt
@@ -0,0 +1,16 @@
+Freescale i.MX7ULP System Integration Module
+----------------------------------------------
+The system integration module (SIM) provides system control and chip configuration
+registers. In this module, chip revision information is located in JTAG ID register,
+and a set of registers have been made available in DGO domain for SW use, with the
+objective to maintain its value between system resets.
+
+Required properties:
+- compatible: Should be "fsl,imx7ulp-sim".
+- reg: Specifies base physical address and size of the register sets.
+
+Example:
+sim: sim@410a3000 {
+ compatible = "fsl,imx7ulp-sim", "syscon";
+ reg = <0x410a3000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 27784b6edfed..72d481c8dd48 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -58,7 +58,11 @@ This binding for the SCU power domain providers uses the generic power
domain binding[2].
Required properties:
-- compatible: Should be "fsl,imx8qxp-scu-pd".
+- compatible: Should be one of:
+ "fsl,imx8qm-scu-pd",
+ "fsl,imx8qxp-scu-pd"
+ followed by "fsl,scu-pd"
+
- #power-domain-cells: Must be 1. Contains the Resource ID used by
SCU commands.
See detailed Resource ID list from:
@@ -70,7 +74,10 @@ Clock bindings based on SCU Message Protocol
This binding uses the common clock binding[1].
Required properties:
-- compatible: Should be "fsl,imx8qxp-clock".
+- compatible: Should be one of:
+ "fsl,imx8qm-clock"
+ "fsl,imx8qxp-clock"
+ followed by "fsl,scu-clk"
- #clock-cells: Should be 1. Contains the Clock ID value.
- clocks: List of clock specifiers, must contain an entry for
each required entry in clock-names
@@ -137,7 +144,7 @@ firmware {
&lsio_mu1 1 3>;
clk: clk {
- compatible = "fsl,imx8qxp-clk";
+ compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
#clock-cells = <1>;
};
@@ -154,7 +161,7 @@ firmware {
};
pd: imx8qx-pd {
- compatible = "fsl,imx8qxp-scu-pd";
+ compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
#power-domain-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
deleted file mode 100644
index 7fbc42484001..000000000000
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ /dev/null
@@ -1,237 +0,0 @@
-Freescale i.MX Platforms Device Tree Bindings
------------------------------------------------
-
-i.MX23 Evaluation Kit
-Required root node properties:
- - compatible = "fsl,imx23-evk", "fsl,imx23";
-
-i.MX25 Product Development Kit
-Required root node properties:
- - compatible = "fsl,imx25-pdk", "fsl,imx25";
-
-i.MX27 Product Development Kit
-Required root node properties:
- - compatible = "fsl,imx27-pdk", "fsl,imx27";
-
-i.MX28 Evaluation Kit
-Required root node properties:
- - compatible = "fsl,imx28-evk", "fsl,imx28";
-
-i.MX51 Babbage Board
-Required root node properties:
- - compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-i.MX53 Automotive Reference Design Board
-Required root node properties:
- - compatible = "fsl,imx53-ard", "fsl,imx53";
-
-i.MX53 Evaluation Kit
-Required root node properties:
- - compatible = "fsl,imx53-evk", "fsl,imx53";
-
-i.MX53 Quick Start Board
-Required root node properties:
- - compatible = "fsl,imx53-qsb", "fsl,imx53";
-
-i.MX53 Smart Mobile Reference Design Board
-Required root node properties:
- - compatible = "fsl,imx53-smd", "fsl,imx53";
-
-i.MX6 Quad Armadillo2 Board
-Required root node properties:
- - compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-i.MX6 Quad SABRE Lite Board
-Required root node properties:
- - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-i.MX6 Quad SABRE Smart Device Board
-Required root node properties:
- - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
-
-i.MX6 Quad SABRE Automotive Board
-Required root node properties:
- - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
-
-i.MX6SLL EVK board
-Required root node properties:
- - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
-
-i.MX6 Quad Plus SABRE Smart Device Board
-Required root node properties:
- - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
-
-i.MX6 Quad Plus SABRE Automotive Board
-Required root node properties:
- - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
-
-i.MX6 DualLite SABRE Smart Device Board
-Required root node properties:
- - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
-
-i.MX6 DualLite/Solo SABRE Automotive Board
-Required root node properties:
- - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
-
-i.MX6 SoloLite EVK Board
-Required root node properties:
- - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-
-i.MX6 UltraLite 14x14 EVK Board
-Required root node properties:
- - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-
-i.MX6 UltraLiteLite 14x14 EVK Board
-Required root node properties:
- - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
-
-i.MX6 ULZ 14x14 EVK Board
-Required root node properties:
- - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
-
-i.MX6 SoloX SDB Board
-Required root node properties:
- - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-i.MX6 SoloX Sabre Auto Board
-Required root node properties:
- - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
-
-i.MX7 SabreSD Board
-Required root node properties:
- - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
-
-i.MX7ULP Evaluation Kit
-Required root node properties:
- - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp";
-
-Generic i.MX boards
--------------------
-
-No iomux setup is done for these boards, so this must have been configured
-by the bootloader for boards to work with the generic bindings.
-
-i.MX27 generic board
-Required root node properties:
- - compatible = "fsl,imx27";
-
-i.MX51 generic board
-Required root node properties:
- - compatible = "fsl,imx51";
-
-i.MX53 generic board
-Required root node properties:
- - compatible = "fsl,imx53";
-
-i.MX6q generic board
-Required root node properties:
- - compatible = "fsl,imx6q";
-
-i.MX7ULP generic board
-Required root node properties:
- - compatible = "fsl,imx7ulp";
-
-Freescale Vybrid Platform Device Tree Bindings
-----------------------------------------------
-
-For the Vybrid SoC familiy all variants with DDR controller are supported,
-which is the VF5xx and VF6xx series. Out of historical reasons, in most
-places the kernel uses vf610 to refer to the whole familiy.
-The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
-core support.
-
-Required root node compatible property (one of them):
- - compatible = "fsl,vf500";
- - compatible = "fsl,vf510";
- - compatible = "fsl,vf600";
- - compatible = "fsl,vf610";
- - compatible = "fsl,vf610m4";
-
-Freescale LS1021A Platform Device Tree Bindings
-------------------------------------------------
-
-Required root node compatible properties:
- - compatible = "fsl,ls1021a";
-
-Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
-----------------------------------------------------------------
-
-LS1012A SoC
-Required root node properties:
- - compatible = "fsl,ls1012a";
-
-LS1012A ARMv8 based RDB Board
-Required root node properties:
- - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
-
-LS1012A ARMv8 based FRDM Board
-Required root node properties:
- - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
-
-LS1012A ARMv8 based QDS Board
-Required root node properties:
- - compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
-
-LS1043A SoC
-Required root node properties:
- - compatible = "fsl,ls1043a";
-
-LS1043A ARMv8 based RDB Board
-Required root node properties:
- - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
-
-LS1043A ARMv8 based QDS Board
-Required root node properties:
- - compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
-
-LS1046A SoC
-Required root node properties:
- - compatible = "fsl,ls1046a";
-
-LS1046A ARMv8 based QDS Board
-Required root node properties:
- - compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
-
-LS1046A ARMv8 based RDB Board
-Required root node properties:
- - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
-
-LS1088A SoC
-Required root node properties:
- - compatible = "fsl,ls1088a";
-
-LS1088A ARMv8 based QDS Board
-Required root node properties:
- - compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
-
-LS1088A ARMv8 based RDB Board
-Required root node properties:
- - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
-
-LS2080A SoC
-Required root node properties:
- - compatible = "fsl,ls2080a";
-
-LS2080A ARMv8 based Simulator model
-Required root node properties:
- - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
-
-LS2080A ARMv8 based QDS Board
-Required root node properties:
- - compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
-
-LS2080A ARMv8 based RDB Board
-Required root node properties:
- - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
-
-LS2088A SoC
-Required root node properties:
- - compatible = "fsl,ls2088a";
-
-LS2088A ARMv8 based QDS Board
-Required root node properties:
- - compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
-
-LS2088A ARMv8 based RDB Board
-Required root node properties:
- - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
new file mode 100644
index 000000000000..7e2cd6ad26bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Platforms Device Tree Bindings
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - Li Yang <leoyang.li@nxp.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: i.MX23 based Boards
+ items:
+ - enum:
+ - fsl,imx23-evk
+ - olimex,imx23-olinuxino
+ - const: fsl,imx23
+
+ - description: i.MX25 Product Development Kit
+ items:
+ - enum:
+ - fsl,imx25-pdk
+ - const: fsl,imx25
+
+ - description: i.MX27 Product Development Kit
+ items:
+ - enum:
+ - fsl,imx27-pdk
+ - const: fsl,imx27
+
+ - description: i.MX28 based Boards
+ items:
+ - enum:
+ - fsl,imx28-evk
+ - i2se,duckbill
+ - i2se,duckbill-2
+ - technologic,imx28-ts4600
+ - const: fsl,imx28
+ - description: i.MX28 Duckbill 2 based Boards
+ items:
+ - enum:
+ - i2se,duckbill-2-485
+ - i2se,duckbill-2-enocean
+ - i2se,duckbill-2-spi
+ - const: i2se,duckbill-2
+ - const: fsl,imx28
+
+ - description: i.MX51 Babbage Board
+ items:
+ - enum:
+ - armadeus,imx51-apf51
+ - fsl,imx51-babbage
+ - technologic,imx51-ts4800
+ - const: fsl,imx51
+
+ - description: i.MX53 based Boards
+ items:
+ - enum:
+ - bhf,cx9020
+ - fsl,imx53-ard
+ - fsl,imx53-evk
+ - fsl,imx53-qsb
+ - fsl,imx53-smd
+ - const: fsl,imx53
+
+ - description: i.MX6Q based Boards
+ items:
+ - enum:
+ - fsl,imx6q-arm2
+ - fsl,imx6q-sabreauto
+ - fsl,imx6q-sabrelite
+ - fsl,imx6q-sabresd
+ - technologic,imx6q-ts4900
+ - technologic,imx6q-ts7970
+ - const: fsl,imx6q
+
+ - description: i.MX6QP based Boards
+ items:
+ - enum:
+ - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board
+ - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
+ - const: fsl,imx6qp
+
+ - description: i.MX6DL based Boards
+ items:
+ - enum:
+ - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
+ - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
+ - technologic,imx6dl-ts4900
+ - technologic,imx6dl-ts7970
+ - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board
+ - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board
+ - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
+ - const: fsl,imx6dl
+
+ - description: i.MX6SL based Boards
+ items:
+ - enum:
+ - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
+ - const: fsl,imx6sl
+
+ - description: i.MX6SLL based Boards
+ items:
+ - enum:
+ - fsl,imx6sll-evk
+ - const: fsl,imx6sll
+
+ - description: i.MX6SX based Boards
+ items:
+ - enum:
+ - fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board
+ - fsl,imx6sx-sdb # i.MX6 SoloX SDB Board
+ - const: fsl,imx6sx
+
+ - description: i.MX6UL based Boards
+ items:
+ - enum:
+ - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
+ - const: fsl,imx6ul
+
+ - description: i.MX6ULL based Boards
+ items:
+ - enum:
+ - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
+ - const: fsl,imx6ull
+
+ - description: i.MX6ULZ based Boards
+ items:
+ - enum:
+ - fsl,imx6ulz-14x14-evk # i.MX6 ULZ 14x14 EVK Board
+ - const: fsl,imx6ull # This seems odd. Should be last?
+ - const: fsl,imx6ulz
+
+ - description: i.MX7D based Boards
+ items:
+ - enum:
+ - fsl,imx7d-sdb # i.MX7 SabreSD Board
+ - const: fsl,imx7d
+
+ - description:
+ Compulab SBC-iMX7 is a single board computer based on the
+ Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
+ the CL-SOM-iMX7 System-on-Module providing most of the functions,
+ and SB-SOM-iMX7 carrier board providing additional peripheral
+ functions and connectors.
+ items:
+ - const: compulab,sbc-imx7
+ - const: compulab,cl-som-imx7
+ - const: fsl,imx7d
+
+ - description: i.MX8QXP based Boards
+ items:
+ - enum:
+ - fsl,imx8qxp-mek # i.MX8QXP MEK Board
+ - const: fsl,imx8qxp
+
+ - description:
+ Freescale Vybrid Platform Device Tree Bindings
+
+ For the Vybrid SoC familiy all variants with DDR controller are supported,
+ which is the VF5xx and VF6xx series. Out of historical reasons, in most
+ places the kernel uses vf610 to refer to the whole familiy.
+ The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
+ core support.
+ items:
+ - enum:
+ - fsl,vf500
+ - fsl,vf510
+ - fsl,vf600
+ - fsl,vf610
+ - fsl,vf610m4
+
+ - description: LS1012A based Boards
+ items:
+ - enum:
+ - ebs-systart,oxalis
+ - fsl,ls1012a-rdb
+ - fsl,ls1012a-frdm
+ - fsl,ls1012a-qds
+ - const: fsl,ls1012a
+
+ - description: LS1021A based Boards
+ items:
+ - enum:
+ - fsl,ls1021a-moxa-uc-8410a
+ - fsl,ls1021a-qds
+ - fsl,ls1021a-twr
+ - const: fsl,ls1021a
+
+ - description: LS1043A based Boards
+ items:
+ - enum:
+ - fsl,ls1043a-rdb
+ - fsl,ls1043a-qds
+ - const: fsl,ls1043a
+
+ - description: LS1046A based Boards
+ items:
+ - enum:
+ - fsl,ls1046a-qds
+ - fsl,ls1046a-rdb
+ - const: fsl,ls1046a
+
+ - description: LS1088A based Boards
+ items:
+ - enum:
+ - fsl,ls1088a-qds
+ - fsl,ls1088a-rdb
+ - const: fsl,ls1088a
+
+ - description: LS2080A based Boards
+ items:
+ - enum:
+ - fsl,ls2080a-simu
+ - fsl,ls2080a-qds
+ - fsl,ls2080a-rdb
+ - const: fsl,ls2080a
+
+ - description: LS2088A based Boards
+ items:
+ - enum:
+ - fsl,ls2088a-qds
+ - fsl,ls2088a-rdb
+ - const: fsl,ls2088a
+
+...
diff --git a/Documentation/devicetree/bindings/arm/i2se.txt b/Documentation/devicetree/bindings/arm/i2se.txt
deleted file mode 100644
index dbd54a3aa07d..000000000000
--- a/Documentation/devicetree/bindings/arm/i2se.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-I2SE Device Tree Bindings
--------------------------
-
-Duckbill Board
-Required root node properties:
- - compatible = "i2se,duckbill", "fsl,imx28";
-
-Duckbill 2 Board
-Required root node properties:
- - compatible = "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 485 Board
-Required root node properties:
- - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 EnOcean Board
-Required root node properties:
- - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-Duckbill 2 SPI Board
-Required root node properties:
- - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt
deleted file mode 100644
index fbe6cb21f4cf..000000000000
--- a/Documentation/devicetree/bindings/arm/l2c2x0.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-* ARM L2 Cache Controller
-
-ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
-PL310 and variants) based level 2 cache controller. All these various implementations
-of the L2 cache controller have compatible programming models (Note 1).
-Some of the properties that are just prefixed "cache-*" are taken from section
-3.7.3 of the Devicetree Specification which can be found at:
-https://www.devicetree.org/specifications/
-
-The ARM L2 cache representation in the device tree should be done as follows:
-
-Required properties:
-
-- compatible : should be one of:
- "arm,pl310-cache"
- "arm,l220-cache"
- "arm,l210-cache"
- "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
- "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
- offset needs to be added to the address before passing down to the L2
- cache controller
- "marvell,aurora-system-cache": Marvell Controller designed to be
- compatible with the ARM one, with system cache mode (meaning
- maintenance operations on L1 are broadcasted to the L2 and L2
- performs the same operation).
- "marvell,aurora-outer-cache": Marvell Controller designed to be
- compatible with the ARM one with outer cache mode.
- "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible
- with arm,pl310-cache controller.
-- cache-unified : Specifies the cache is a unified cache.
-- cache-level : Should be set to 2 for a level 2 cache.
-- reg : Physical base address and size of cache controller's memory mapped
- registers.
-
-Optional properties:
-
-- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
- read, write and setup latencies. Minimum valid values are 1. Controllers
- without setup latency control should use a value of 0.
-- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
- read, write and setup latencies. Controllers without setup latency control
- should use 0. Controllers without separate read and write Tag RAM latency
- values should only use the first cell.
-- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
-- arm,filter-ranges : <start length> Starting address and length of window to
- filter. Addresses in the filter window are directed to the M1 port. Other
- addresses will go to the M0 port.
-- arm,io-coherent : indicates that the system is operating in an hardware
- I/O coherent mode. Valid only when the arm,pl310-cache compatible
- string is used.
-- interrupts : 1 combined interrupt.
-- cache-size : specifies the size in bytes of the cache
-- cache-sets : specifies the number of associativity sets of the cache
-- cache-block-size : specifies the size in bytes of a cache block
-- cache-line-size : specifies the size in bytes of a line in the cache,
- if this is not specified, the line size is assumed to be equal to the
- cache block size
-- cache-id-part: cache id part number to be used if it is not present
- on hardware
-- wt-override: If present then L2 is forced to Write through mode
-- arm,double-linefill : Override double linefill enable setting. Enable if
- non-zero, disable if zero.
-- arm,double-linefill-incr : Override double linefill on INCR read. Enable
- if non-zero, disable if zero.
-- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable
- if non-zero, disable if zero.
-- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero,
- disable if zero.
-- arm,prefetch-offset : Override prefetch offset value. Valid values are
- 0-7, 15, 23, and 31.
-- arm,shared-override : The default behavior of the L220 or PL310 cache
- controllers with respect to the shareable attribute is to transform "normal
- memory non-cacheable transactions" into "cacheable no allocate" (for reads)
- or "write through no write allocate" (for writes).
- On systems where this may cause DMA buffer corruption, this property must be
- specified to indicate that such transforms are precluded.
-- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
-- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
-- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
- Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
- will randomly hang unless outer sync operations are disabled.
-- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
- (forcibly enable), property absent (retain settings set by firmware)
-- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
- <1> (forcibly enable), property absent (retain settings set by
- firmware)
-- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
- disable), <1> (forcibly enable), property absent (OS specific behavior,
- preferably retain firmware settings)
-- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
- <1> (forcibly enable), property absent (OS specific behavior,
- preferably retain firmware settings)
-- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310)
-- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero
- write (PL310)
-
-Example:
-
-L2: cache-controller {
- compatible = "arm,pl310-cache";
- reg = <0xfff12000 0x1000>;
- arm,data-latency = <1 1 1>;
- arm,tag-latency = <2 2 2>;
- arm,filter-ranges = <0x80000000 0x8000000>;
- cache-unified;
- cache-level = <2>;
- interrupts = <45>;
-};
-
-Note 1: The description in this document doesn't apply to integrated L2
- cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
- integrated L2 controllers are assumed to be all preconfigured by
- early secure boot code. Thus no need to deal with their configuration
- in the kernel at all.
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
new file mode 100644
index 000000000000..bfc5c185561c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM L2 Cache Controller
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |+
+ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
+ PL220/PL310 and variants) based level 2 cache controller. All these various
+ implementations of the L2 cache controller have compatible programming
+ models (Note 1). Some of the properties that are just prefixed "cache-*" are
+ taken from section 3.7.3 of the Devicetree Specification which can be found
+ at:
+ https://www.devicetree.org/specifications/
+
+ Note 1: The description in this document doesn't apply to integrated L2
+ cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+ integrated L2 controllers are assumed to be all preconfigured by
+ early secure boot code. Thus no need to deal with their configuration
+ in the kernel at all.
+
+allOf:
+ - $ref: /schemas/cache-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - arm,pl310-cache
+ - arm,l220-cache
+ - arm,l210-cache
+ # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+ - bcm,bcm11351-a2-pl310-cache
+ # For Broadcom bcm11351 chipset where an
+ # offset needs to be added to the address before passing down to the L2
+ # cache controller
+ - brcm,bcm11351-a2-pl310-cache
+ # Marvell Controller designed to be
+ # compatible with the ARM one, with system cache mode (meaning
+ # maintenance operations on L1 are broadcasted to the L2 and L2
+ # performs the same operation).
+ - marvell,aurora-system-cache
+ # Marvell Controller designed to be
+ # compatible with the ARM one with outer cache mode.
+ - marvell,aurora-outer-cache
+ # Marvell Tauros3 cache controller, compatible
+ # with arm,pl310-cache controller.
+ - marvell,tauros3-cache
+
+ cache-level:
+ const: 2
+
+ cache-unified: true
+ cache-size: true
+ cache-sets: true
+ cache-block-size: true
+ cache-line-size: true
+
+ reg:
+ maxItems: 1
+
+ arm,data-latency:
+ description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Minimum valid values are 1. Controllers
+ without setup latency control should use a value of 0.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 2
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
+
+ arm,tag-latency:
+ description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Controllers without setup latency control
+ should use 0. Controllers without separate read and write Tag RAM latency
+ values should only use the first cell.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 1
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
+
+ arm,dirty-latency:
+ description: Cycles of latency for Dirty RAMs. This is a single cell.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+ maximum: 8
+
+ arm,filter-ranges:
+ description: <start length> Starting address and length of window to
+ filter. Addresses in the filter window are directed to the M1 port. Other
+ addresses will go to the M0 port.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ arm,io-coherent:
+ description: indicates that the system is operating in an hardware
+ I/O coherent mode. Valid only when the arm,pl310-cache compatible
+ string is used.
+ type: boolean
+
+ interrupts:
+ # Either a single combined interrupt or up to 9 individual interrupts
+ minItems: 1
+ maxItems: 9
+
+ cache-id-part:
+ description: cache id part number to be used if it is not present
+ on hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ wt-override:
+ description: If present then L2 is forced to Write through mode
+ type: boolean
+
+ arm,double-linefill:
+ description: Override double linefill enable setting. Enable if
+ non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,double-linefill-incr:
+ description: Override double linefill on INCR read. Enable
+ if non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,double-linefill-wrap:
+ description: Override double linefill on WRAP read. Enable
+ if non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,prefetch-drop:
+ description: Override prefetch drop enable setting. Enable if non-zero,
+ disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,prefetch-offset:
+ description: Override prefetch offset value.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+
+ arm,shared-override:
+ description: The default behavior of the L220 or PL310 cache
+ controllers with respect to the shareable attribute is to transform "normal
+ memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+ or "write through no write allocate" (for writes).
+ On systems where this may cause DMA buffer corruption, this property must
+ be specified to indicate that such transforms are precluded.
+ type: boolean
+
+ arm,parity-enable:
+ description: enable parity checking on the L2 cache (L220 or PL310).
+ type: boolean
+
+ arm,parity-disable:
+ description: disable parity checking on the L2 cache (L220 or PL310).
+ type: boolean
+
+ arm,outer-sync-disable:
+ description: disable the outer sync operation on the L2 cache.
+ Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+ will randomly hang unless outer sync operations are disabled.
+ type: boolean
+
+ prefetch-data:
+ description: |
+ Data prefetch. Value: <0> (forcibly disable), <1>
+ (forcibly enable), property absent (retain settings set by firmware)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ prefetch-instr:
+ description: |
+ Instruction prefetch. Value: <0> (forcibly disable),
+ <1> (forcibly enable), property absent (retain settings set by
+ firmware)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,dynamic-clock-gating:
+ description: |
+ L2 dynamic clock gating. Value: <0> (forcibly
+ disable), <1> (forcibly enable), property absent (OS specific behavior,
+ preferably retain firmware settings)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,standby-mode:
+ description: L2 standby mode enable. Value <0> (forcibly disable),
+ <1> (forcibly enable), property absent (OS specific behavior,
+ preferably retain firmware settings)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,early-bresp-disable:
+ description: Disable the CA9 optimization Early BRESP (PL310)
+ type: boolean
+
+ arm,full-line-zero-disable:
+ description: Disable the CA9 optimization Full line of zero
+ write (PL310)
+ type: boolean
+
+required:
+ - compatible
+ - cache-unified
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cache-controller@fff12000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x80000000 0x8000000>;
+ cache-unified;
+ cache-level = <2>;
+ interrupts = <45>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 8f260e5cfd16..56ac7896d6d8 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -15,11 +15,12 @@ compatible: Must contain one of
"mediatek,mt6795"
"mediatek,mt6797"
"mediatek,mt7622"
- "mediatek,mt7623" which is referred to MT7623N SoC
- "mediatek,mt7623a"
+ "mediatek,mt7623"
+ "mediatek,mt7629"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
+ "mediatek,mt8183"
Supported boards:
@@ -57,6 +58,9 @@ Supported boards:
- Reference board variant 1 for MT7622:
Required root node properties:
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
+- Bananapi BPI-R64 for MT7622:
+ Required root node properties:
+ - compatible = "bananapi,bpi-r64", "mediatek,mt7622";
- Reference board for MT7623a with eMMC:
Required root node properties:
- compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
@@ -68,6 +72,9 @@ Supported boards:
- compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
- Bananapi BPI-R2 board:
- compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+- Reference board for MT7629:
+ Required root node properties:
+ - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
@@ -77,3 +84,6 @@ Supported boards:
- MTK mt8173 tablet EVB:
Required root node properties:
- compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
+- Evaluation board for MT8183:
+ Required root node properties:
+ - compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
diff --git a/Documentation/devicetree/bindings/arm/olimex.txt b/Documentation/devicetree/bindings/arm/olimex.txt
deleted file mode 100644
index d726aeca56be..000000000000
--- a/Documentation/devicetree/bindings/arm/olimex.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Olimex Device Tree Bindings
----------------------------
-
-SAM9-L9260 Board
-Required root node properties:
- - compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
-
-i.MX23 Olinuxino Low Cost Board
-Required root node properties:
- - compatible = "olimex,imx23-olinuxino", "fsl,imx23";
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
deleted file mode 100644
index 13611a8199bb..000000000000
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* ARM Performance Monitor Units
-
-ARM cores often have a PMU for counting cpu and cache events like cache misses
-and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
-representation in the device tree should be done as under:-
-
-Required properties:
-
-- compatible : should be one of
- "apm,potenza-pmu"
- "arm,armv8-pmuv3"
- "arm,cortex-a73-pmu"
- "arm,cortex-a72-pmu"
- "arm,cortex-a57-pmu"
- "arm,cortex-a53-pmu"
- "arm,cortex-a35-pmu"
- "arm,cortex-a17-pmu"
- "arm,cortex-a15-pmu"
- "arm,cortex-a12-pmu"
- "arm,cortex-a9-pmu"
- "arm,cortex-a8-pmu"
- "arm,cortex-a7-pmu"
- "arm,cortex-a5-pmu"
- "arm,arm11mpcore-pmu"
- "arm,arm1176-pmu"
- "arm,arm1136-pmu"
- "brcm,vulcan-pmu"
- "cavium,thunder-pmu"
- "qcom,scorpion-pmu"
- "qcom,scorpion-mp-pmu"
- "qcom,krait-pmu"
-- interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
- interrupt (PPI) then 1 interrupt should be specified.
-
-Optional properties:
-
-- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU
- nodes corresponding directly to the affinity of
- the SPIs listed in the interrupts property.
-
- When using a PPI, specifies a list of phandles to CPU
- nodes corresponding to the set of CPUs which have
- a PMU of this type signalling the PPI listed in the
- interrupts property, unless this is already specified
- by the PPI interrupt specifier itself (in which case
- the interrupt-affinity property shouldn't be present).
-
- This property should be present when there is more than
- a single SPI.
-
-
-- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
- events.
-
-- secure-reg-access : Indicates that the ARMv7 Secure Debug Enable Register
- (SDER) is accessible. This will cause the driver to do
- any setup required that is only possible in ARMv7 secure
- state. If not present the ARMv7 SDER will not be touched,
- which means the PMU may fail to operate unless external
- code (bootloader or security monitor) has performed the
- appropriate initialisation. Note that this property is
- not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
- in Non-secure state.
-
-Example:
-
-pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <100 101>;
-};
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
new file mode 100644
index 000000000000..52ae094ce330
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Performance Monitor Units
+
+maintainers:
+ - Mark Rutland <mark.rutland@arm.com>
+ - Will Deacon <will.deacon@arm.com>
+
+description: |+
+ ARM cores often have a PMU for counting cpu and cache events like cache misses
+ and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+ representation in the device tree should be done as under:-
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apm,potenza-pmu
+ - arm,armv8-pmuv3
+ - arm,cortex-a73-pmu
+ - arm,cortex-a72-pmu
+ - arm,cortex-a57-pmu
+ - arm,cortex-a53-pmu
+ - arm,cortex-a35-pmu
+ - arm,cortex-a17-pmu
+ - arm,cortex-a15-pmu
+ - arm,cortex-a12-pmu
+ - arm,cortex-a9-pmu
+ - arm,cortex-a8-pmu
+ - arm,cortex-a7-pmu
+ - arm,cortex-a5-pmu
+ - arm,arm11mpcore-pmu
+ - arm,arm1176-pmu
+ - arm,arm1136-pmu
+ - brcm,vulcan-pmu
+ - cavium,thunder-pmu
+ - qcom,scorpion-pmu
+ - qcom,scorpion-mp-pmu
+ - qcom,krait-pmu
+
+ interrupts:
+ # Don't know how many CPUs, so no constraints to specify
+ description: 1 per-cpu interrupt (PPI) or 1 interrupt per core.
+
+ interrupt-affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ When using SPIs, specifies a list of phandles to CPU
+ nodes corresponding directly to the affinity of
+ the SPIs listed in the interrupts property.
+
+ When using a PPI, specifies a list of phandles to CPU
+ nodes corresponding to the set of CPUs which have
+ a PMU of this type signalling the PPI listed in the
+ interrupts property, unless this is already specified
+ by the PPI interrupt specifier itself (in which case
+ the interrupt-affinity property shouldn't be present).
+
+ This property should be present when there is more than
+ a single SPI.
+
+ qcom,no-pc-write:
+ type: boolean
+ description:
+ Indicates that this PMU doesn't support the 0xc and 0xd events.
+
+ secure-reg-access:
+ type: boolean
+ description:
+ Indicates that the ARMv7 Secure Debug Enable Register
+ (SDER) is accessible. This will cause the driver to do
+ any setup required that is only possible in ARMv7 secure
+ state. If not present the ARMv7 SDER will not be touched,
+ which means the PMU may fail to operate unless external
+ code (bootloader or security monitor) has performed the
+ appropriate initialisation. Note that this property is
+ not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
+ in Non-secure state.
+
+required:
+ - compatible
+
+...
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
new file mode 100644
index 000000000000..19f379863d50
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -0,0 +1,238 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/shmobile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Emma Mobile EV2
+ items:
+ - enum:
+ - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual
+ - const: renesas,emev2
+
+ - description: RZ/A1H (R7S72100)
+ items:
+ - enum:
+ - renesas,genmai # Genmai (RTK772100BC00000BR)
+ - renesas,gr-peach # GR-Peach (X28A-M01-E/F)
+ - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE)
+ - const: renesas,r7s72100
+
+ - description: RZ/A2 (R7S9210)
+ items:
+ - enum:
+ - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE)
+ - const: renesas,r7s9210
+
+ - description: SH-Mobile AG5 (R8A73A00/SH73A0)
+ items:
+ - enum:
+ - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT
+ - const: renesas,sh73a0
+
+ - description: R-Mobile APE6 (R8A73A40)
+ items:
+ - enum:
+ - renesas,ape6evm
+ - const: renesas,r8a73a4
+
+ - description: R-Mobile A1 (R8A77400)
+ items:
+ - enum:
+ - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA
+ - const: renesas,r8a7740
+
+ - description: RZ/G1H (R8A77420)
+ items:
+ - const: renesas,r8a7742
+
+ - description: RZ/G1M (R8A77430)
+ items:
+ - enum:
+ # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
+ - iwave,g20d
+ - const: iwave,g20m
+ - const: renesas,r8a7743
+
+ - items:
+ - enum:
+ # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
+ - iwave,g20m
+ - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE)
+ - const: renesas,r8a7743
+
+ - description: RZ/G1N (R8A77440)
+ items:
+ - enum:
+ # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
+ - iwave,g20d
+ - const: iwave,g20m
+ - const: renesas,r8a7744
+
+ - items:
+ - enum:
+ # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
+ - iwave,g20m
+ - const: renesas,r8a7744
+
+ - description: RZ/G1E (R8A77450)
+ items:
+ - enum:
+ - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
+ - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE)
+ - const: renesas,r8a7745
+
+ - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
+ items:
+ - const: iwave,g22d
+ - const: iwave,g22m
+ - const: renesas,r8a7745
+
+ - description: RZ/G1C (R8A77470)
+ items:
+ - enum:
+ - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
+ - const: renesas,r8a77470
+
+ - description: RZ/G2M (R8A774A1)
+ items:
+ - const: renesas,r8a774a1
+
+ - description: RZ/G2E (R8A774C0)
+ items:
+ - enum:
+ - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874)
+ - const: renesas,r8a774c0
+
+ - items:
+ - enum:
+ - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875)
+ - const: si-linux,cat874
+ - const: renesas,r8a774c0
+
+ - description: R-Car M1A (R8A77781)
+ items:
+ - enum:
+ - renesas,bockw
+ - const: renesas,r8a7778
+
+ - description: R-Car H1 (R8A77790)
+ items:
+ - enum:
+ - renesas,marzen # Marzen (R0P7779A00010S)
+ - const: renesas,r8a7779
+
+ - description: R-Car H2 (R8A77900)
+ items:
+ - enum:
+ - renesas,lager # Lager (RTP0RC7790SEB00010S)
+ - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
+ - const: renesas,r8a7790
+
+ - description: R-Car M2-W (R8A77910)
+ items:
+ - enum:
+ - renesas,henninger
+ - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S)
+ - renesas,porter # Porter (M2-LCDP)
+ - const: renesas,r8a7791
+
+ - description: R-Car V2H (R8A77920)
+ items:
+ - enum:
+ - renesas,blanche # Blanche (RTP0RC7792SEB00010S)
+ - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE)
+ - const: renesas,r8a7792
+
+ - description: R-Car M2-N (R8A77930)
+ items:
+ - enum:
+ - renesas,gose # Gose (RTP0RC7793SEB00010S)
+ - const: renesas,r8a7793
+
+ - description: R-Car E2 (R8A77940)
+ items:
+ - enum:
+ - renesas,alt # Alt (RTP0RC7794SEB00010S)
+ - renesas,silk # SILK (RTP0RC7794LCB00011S)
+ - const: renesas,r8a7794
+
+ - description: R-Car H3 (R8A77950)
+ items:
+ - enum:
+ # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
+ # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
+ - renesas,h3ulcb
+ - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
+ - const: renesas,r8a7795
+
+ - description: R-Car M3-W (R8A77960)
+ items:
+ - enum:
+ - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
+ - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S)
+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
+ - const: renesas,r8a7796
+
+ - description: Kingfisher (SBEV-RCAR-KF-M03)
+ items:
+ - const: shimafuji,kingfisher
+ - enum:
+ - renesas,h3ulcb
+ - renesas,m3ulcb
+ - enum:
+ - renesas,r8a7795
+ - renesas,r8a7796
+
+ - description: R-Car M3-N (R8A77965)
+ items:
+ - enum:
+ - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+ - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N))
+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
+ - const: renesas,r8a77965
+
+ - description: R-Car V3M (R8A77970)
+ items:
+ - enum:
+ - renesas,eagle # Eagle (RTP0RC77970SEB0010S)
+ - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10)
+ - const: renesas,r8a77970
+
+ - description: R-Car V3H (R8A77980)
+ items:
+ - enum:
+ - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
+ - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
+ - const: renesas,r8a77980
+
+ - description: R-Car E3 (R8A77990)
+ items:
+ - enum:
+ - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S)
+ - const: renesas,r8a77990
+
+ - description: R-Car D3 (R8A77995)
+ items:
+ - enum:
+ - renesas,draak # Draak (RTP0RC77995SEB0010S)
+ - const: renesas,r8a77995
+
+ - description: RZ/N1D (R9A06G032)
+ items:
+ - enum:
+ - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
+ - const: renesas,r9a06g032
+
+...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index b12958bda09c..061a03edf9c8 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -60,6 +60,11 @@ properties:
- const: chipspark,rayeager-px2
- const: rockchip,rk3066a
+ - description: Elgin RV1108 R1
+ items:
+ - const: elgin,rv1108-r1
+ - const: rockchip,rv1108
+
- description: Firefly Firefly-RK3288
items:
- enum:
@@ -87,6 +92,13 @@ properties:
- const: firefly,roc-rk3399-pc
- const: rockchip,rk3399
+ - description: FriendlyElec NanoPi4 series boards
+ items:
+ - enum:
+ - friendlyarm,nanopc-t4
+ - friendlyarm,nanopi-m4
+ - const: rockchip,rk3399
+
- description: GeekBuying GeekBox
items:
- const: geekbuying,geekbox
@@ -317,6 +329,11 @@ properties:
- const: radxa,rock
- const: rockchip,rk3188
+ - description: Radxa ROCK Pi 4
+ items:
+ - const: radxa,rockpi4
+ - const: rockchip,rk3399
+
- description: Radxa Rock2 Square
items:
- const: radxa,rock2-square
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
deleted file mode 100644
index 7f91c2a8b54e..000000000000
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ /dev/null
@@ -1,155 +0,0 @@
-Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
---------------------------------------------------------------------
-
-SoCs:
-
- - Emma Mobile EV2
- compatible = "renesas,emev2"
- - RZ/A1H (R7S72100)
- compatible = "renesas,r7s72100"
- - RZ/A2 (R7S9210)
- compatible = "renesas,r7s9210"
- - SH-Mobile AG5 (R8A73A00/SH73A0)
- compatible = "renesas,sh73a0"
- - R-Mobile APE6 (R8A73A40)
- compatible = "renesas,r8a73a4"
- - R-Mobile A1 (R8A77400)
- compatible = "renesas,r8a7740"
- - RZ/G1H (R8A77420)
- compatible = "renesas,r8a7742"
- - RZ/G1M (R8A77430)
- compatible = "renesas,r8a7743"
- - RZ/G1N (R8A77440)
- compatible = "renesas,r8a7744"
- - RZ/G1E (R8A77450)
- compatible = "renesas,r8a7745"
- - RZ/G1C (R8A77470)
- compatible = "renesas,r8a77470"
- - RZ/G2M (R8A774A1)
- compatible = "renesas,r8a774a1"
- - RZ/G2E (R8A774C0)
- compatible = "renesas,r8a774c0"
- - R-Car M1A (R8A77781)
- compatible = "renesas,r8a7778"
- - R-Car H1 (R8A77790)
- compatible = "renesas,r8a7779"
- - R-Car H2 (R8A77900)
- compatible = "renesas,r8a7790"
- - R-Car M2-W (R8A77910)
- compatible = "renesas,r8a7791"
- - R-Car V2H (R8A77920)
- compatible = "renesas,r8a7792"
- - R-Car M2-N (R8A77930)
- compatible = "renesas,r8a7793"
- - R-Car E2 (R8A77940)
- compatible = "renesas,r8a7794"
- - R-Car H3 (R8A77950)
- compatible = "renesas,r8a7795"
- - R-Car M3-W (R8A77960)
- compatible = "renesas,r8a7796"
- - R-Car M3-N (R8A77965)
- compatible = "renesas,r8a77965"
- - R-Car V3M (R8A77970)
- compatible = "renesas,r8a77970"
- - R-Car V3H (R8A77980)
- compatible = "renesas,r8a77980"
- - R-Car E3 (R8A77990)
- compatible = "renesas,r8a77990"
- - R-Car D3 (R8A77995)
- compatible = "renesas,r8a77995"
- - RZ/N1D (R9A06G032)
- compatible = "renesas,r9a06g032"
-
-Boards:
-
- - Alt (RTP0RC7794SEB00010S)
- compatible = "renesas,alt", "renesas,r8a7794"
- - APE6-EVM
- compatible = "renesas,ape6evm", "renesas,r8a73a4"
- - Atmark Techno Armadillo-800 EVA
- compatible = "renesas,armadillo800eva", "renesas,r8a7740"
- - Blanche (RTP0RC7792SEB00010S)
- compatible = "renesas,blanche", "renesas,r8a7792"
- - BOCK-W
- compatible = "renesas,bockw", "renesas,r8a7778"
- - Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
- compatible = "renesas,condor", "renesas,r8a77980"
- - Draak (RTP0RC77995SEB0010S)
- compatible = "renesas,draak", "renesas,r8a77995"
- - Eagle (RTP0RC77970SEB0010S)
- compatible = "renesas,eagle", "renesas,r8a77970"
- - Ebisu (RTP0RC77990SEB0010S)
- compatible = "renesas,ebisu", "renesas,r8a77990"
- - Genmai (RTK772100BC00000BR)
- compatible = "renesas,genmai", "renesas,r7s72100"
- - GR-Peach (X28A-M01-E/F)
- compatible = "renesas,gr-peach", "renesas,r7s72100"
- - Gose (RTP0RC7793SEB00010S)
- compatible = "renesas,gose", "renesas,r8a7793"
- - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
- H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
- compatible = "renesas,h3ulcb", "renesas,r8a7795"
- - Henninger
- compatible = "renesas,henninger", "renesas,r8a7791"
- - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
- compatible = "iwave,g23s", "renesas,r8a77470"
- - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
- compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"
- - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
- compatible = "iwave,g22m", "renesas,r8a7745"
- - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
- compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
- - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- compatible = "iwave,g20m", "renesas,r8a7743"
- - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
- compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"
- - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
- compatible = "iwave,g20m", "renesas,r8a7744"
- - Kingfisher (SBEV-RCAR-KF-M03)
- compatible = "shimafuji,kingfisher"
- - Koelsch (RTP0RC7791SEB00010S)
- compatible = "renesas,koelsch", "renesas,r8a7791"
- - Kyoto Microcomputer Co. KZM-A9-Dual
- compatible = "renesas,kzm9d", "renesas,emev2"
- - Kyoto Microcomputer Co. KZM-A9-GT
- compatible = "renesas,kzm9g", "renesas,sh73a0"
- - Lager (RTP0RC7790SEB00010S)
- compatible = "renesas,lager", "renesas,r8a7790"
- - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
- compatible = "renesas,m3ulcb", "renesas,r8a7796"
- - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
- compatible = "renesas,m3nulcb", "renesas,r8a77965"
- - Marzen (R0P7779A00010S)
- compatible = "renesas,marzen", "renesas,r8a7779"
- - Porter (M2-LCDP)
- compatible = "renesas,porter", "renesas,r8a7791"
- - RSKRZA1 (YR0K77210C000BE)
- compatible = "renesas,rskrza1", "renesas,r7s72100"
- - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
- compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"
- - Salvator-X (RTP0RC7795SIPB0010S)
- compatible = "renesas,salvator-x", "renesas,r8a7795"
- - Salvator-X (RTP0RC7796SIPB0011S)
- compatible = "renesas,salvator-x", "renesas,r8a7796"
- - Salvator-X (RTP0RC7796SIPB0011S (M3-N))
- compatible = "renesas,salvator-x", "renesas,r8a77965"
- - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
- compatible = "renesas,salvator-xs", "renesas,r8a7795"
- - Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
- compatible = "renesas,salvator-xs", "renesas,r8a7796"
- - Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
- compatible = "renesas,salvator-xs", "renesas,r8a77965"
- - SILK (RTP0RC7794LCB00011S)
- compatible = "renesas,silk", "renesas,r8a7794"
- - SK-RZG1E (YR8A77450S000BE)
- compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
- - SK-RZG1M (YR8A77430S000BE)
- compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
- compatible = "renesas,stout", "renesas,r8a7790"
- - V3HSK (Y-ASK-RCAR-V3H-WS10)
- compatible = "renesas,v3hsk", "renesas,r8a77980"
- - V3MSK (Y-ASK-RCAR-V3M-WS10)
- compatible = "renesas,v3msk", "renesas,r8a77970"
- - Wheat (RTP0RC7792ASKB0000JE)
- compatible = "renesas,wheat", "renesas,r8a7792"
diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
new file mode 100644
index 000000000000..aae53fc3cb1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/milbeaut.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut platforms device tree bindings
+
+maintainers:
+ - Taichi Sugaya <sugaya.taichi@socionext.com>
+ - Takao Orito <orito.takao@socionext.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - socionext,milbeaut-m10v-evb
+ - const: socionext,sc2000a
+...
diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt
deleted file mode 100644
index f1cedc00dcab..000000000000
--- a/Documentation/devicetree/bindings/arm/technologic.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Technologic Systems Platforms Device Tree Bindings
---------------------------------------------------
-
-TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
- - compatible = "technologic,imx28-ts4600", "fsl,imx28"
-
-TS-4800 board
-Required root node properties:
- - compatible = "technologic,imx51-ts4800", "fsl,imx51";
-
-TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
- - compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
- - compatible = "technologic,imx6q-ts4900", "fsl,imx6q"
-
-TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
-It can be mounted on a carrier board providing additional peripheral connectors.
-Required root node properties:
- - compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"
- - compatible = "technologic,imx6q-ts7970", "fsl,imx6q"
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index fbcde8a7e067..60b38eb5c61a 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -87,9 +87,11 @@ properties:
- const: nvidia,tegra124
- items:
- enum:
+ - nvidia,darcy
- nvidia,p2371-0000
- nvidia,p2371-2180
- nvidia,p2571
+ - nvidia,p2894-0050-a08
- const: nvidia,tegra210
- items:
- enum:
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 683eaf3aed79..dda7d6d66479 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -47,9 +47,9 @@ Optional properties:
Timing property for child nodes. It is mandatory, not optional.
- fsl,weim-cs-timing: The timing array, contains timing values for the
- child node. We can get the CS index from the child
- node's "reg" property. The number of registers depends
- on the selected chip.
+ child node. We get the CS indexes from the address
+ ranges in the child node's "reg" property.
+ The number of registers depends on the selected chip:
For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
registers: CSxU, CSxL.
For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
@@ -80,3 +80,29 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
0x0000c000 0x1404a38e 0x00000000>;
};
};
+
+Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
+
+In this case, both chip select 0 and 1 will be configured with the same timing
+array values.
+
+ weim: weim@21b8000 {
+ compatible = "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ clocks = <&clks 196>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x02000000
+ 1 0 0x0a000000 0x02000000
+ 2 0 0x0c000000 0x02000000
+ 3 0 0x0e000000 0x02000000>;
+ fsl,weim-cs-gpr = <&gpr>;
+
+ acme@0 {
+ compatible = "acme,whatever";
+ reg = <0 0 0x100>, <0 0x400000 0x800>,
+ <1 0x400000 0x800>;
+ fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
+ 0x00000000 0xa0000240 0x00000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
index 2ef86ae96df8..d19885b7c73f 100644
--- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -2,13 +2,14 @@
The Actions Semi Owl Clock Management Unit generates and supplies clock
to various controllers within the SoC. The clock binding described here is
-applicable to S900 and S700 SoC's.
+applicable to S900, S700 and S500 SoC's.
Required Properties:
- compatible: should be one of the following,
"actions,s900-cmu"
"actions,s700-cmu"
+ "actions,s500-cmu"
- reg: physical base address of the controller and length of memory mapped
region.
- clocks: Reference to the parent clocks ("hosc", "losc")
@@ -19,8 +20,8 @@ Each clock is assigned an identifier, and client nodes can use this identifier
to specify the clock which they consume.
All available clocks are defined as preprocessor macros in corresponding
-dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be
-used in device tree sources.
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
+actions,s500-cmu.h header and can be used in device tree sources.
External clocks:
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index 79511d7bb321..c41f0be5d438 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -10,6 +10,7 @@ Required Properties:
- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
- GXM (S912) : "amlogic,meson-gxm-aoclkc"
- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
+ - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
followed by the common "amlogic,meson-gx-aoclkc"
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index a6871953bf04..5c8b105be4d6 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,7 @@ Required Properties:
"amlogic,gxbb-clkc" for GXBB SoC,
"amlogic,gxl-clkc" for GXL and GXM SoC,
"amlogic,axg-clkc" for AXG SoC.
+ "amlogic,g12a-clkc" for G12A SoC.
- clocks : list of clock phandle, one for each entry clock-names.
- clock-names : should contain the following:
* "xtal": the platform xtal
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 50d5897c9849..183c327a7d6b 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -50,6 +50,8 @@ Required Properties:
IPs.
- "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
+ - "samsung,exynos5433-cmu-imem" - clock controller compatible for CMU_IMEM
+ which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -168,6 +170,12 @@ Required Properties:
- aclk_cam1_400
- aclk_cam1_552
+ Input clocks for imem clock controller:
+ - oscclk
+ - aclk_imem_sssx_266
+ - aclk_imem_266
+ - aclk_imem_200
+
Optional properties:
- power-domains: a phandle to respective power domain node as described by
generic PM domain bindings (see power/power_domain.txt for more
@@ -469,6 +477,21 @@ Example 2: Examples of clock controller nodes are listed below.
power-domains = <&pd_cam1>;
};
+ cmu_imem: clock-controller@11060000 {
+ compatible = "samsung,exynos5433-cmu-imem";
+ reg = <0x11060000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_imem_sssx_266",
+ "aclk_imem_266",
+ "aclk_imem_200";
+ clocks = <&xxti>,
+ <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
+ <&cmu_top CLK_DIV_ACLK_IMEM_266>,
+ <&cmu_top CLK_DIV_ACLK_IMEM_200>;
+ };
+
Example 3: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
deleted file mode 100644
index 0641a663ad69..000000000000
--- a/Documentation/devicetree/bindings/clock/fixed-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Binding for simple fixed-rate clock sources.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "fixed-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clock-frequency : frequency of clock in Hz. Should be a single cell.
-
-Optional properties:
-- clock-accuracy : accuracy of clock in ppb (parts per billion).
- Should be a single cell.
-- clock-output-names : From common clock binding.
-
-Example:
- clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000000>;
- clock-accuracy = <100>;
- };
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
new file mode 100644
index 000000000000..b657ecd0ef1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for simple fixed-rate clock sources
+
+maintainers:
+ - Michael Turquette <mturquette@baylibre.com>
+ - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+ compatible:
+ const: fixed-clock
+
+ "#clock-cells":
+ const: 0
+
+ clock-frequency: true
+
+ clock-accuracy:
+ description: accuracy of clock in ppb (parts per billion).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clock-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ clock-accuracy = <100>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
deleted file mode 100644
index 189467a7188a..000000000000
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Binding for simple fixed factor rate clock sources.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "fixed-factor-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clock-div: fixed divider.
-- clock-mult: fixed multiplier.
-- clocks: parent clock.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-
-Some clocks that require special treatments are also handled by that
-driver, with the compatibles:
- - allwinner,sun4i-a10-pll3-2x-clk
-
-Example:
- clock {
- compatible = "fixed-factor-clock";
- clocks = <&parentclk>;
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- };
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
new file mode 100644
index 000000000000..b567f8092f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for simple fixed factor rate clock sources
+
+maintainers:
+ - Michael Turquette <mturquette@baylibre.com>
+ - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pll3-2x-clk
+ - fixed-factor-clock
+
+ "#clock-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-div:
+ description: Fixed divider
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+
+ clock-mult:
+ description: Fixed multiplier
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - "#clock-cells"
+ - clock-div
+ - clock-mult
+
+additionalProperties: false
+
+examples:
+ - |
+ clock {
+ compatible = "fixed-factor-clock";
+ clocks = <&parentclk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
new file mode 100644
index 000000000000..c359367fd1a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
@@ -0,0 +1,24 @@
+Binding for simple memory mapped io fixed-rate clock sources.
+The driver reads a clock frequency value from a single 32-bit memory mapped
+I/O register and registers it as a fixed rate clock.
+
+It was designed for test systems, like FPGA, not for complete, finished SoCs.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-mmio-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- reg : Address and length of the clock value register set.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+sysclock: sysclock@fd020004 {
+ #clock-cells = <0>;
+ compatible = "fixed-mmio-clock";
+ reg = <0xfd020004 0x4>;
+};
diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
new file mode 100644
index 000000000000..8e4ab9e619a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
@@ -0,0 +1,29 @@
+* Clock bindings for NXP i.MX8M Mini
+
+Required properties:
+- compatible: Should be "fsl,imx8mm-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include the following entries:
+ - "osc_32k"
+ - "osc_24m"
+ - "clk_ext1"
+ - "clk_ext2"
+ - "clk_ext3"
+ - "clk_ext4"
+
+clk: clock-controller@30380000 {
+ compatible = "fsl,imx8mm-ccm";
+ reg = <0x0 0x30380000 0x0 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+ <&clk_ext3>, <&clk_ext4>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+ "clk_ext3", "clk_ext4";
+};
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
+for the full list of i.MX8M Mini clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
index dff236f524a7..958e0ad78c52 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -8,10 +8,11 @@ the fast CPU cluster. It consists of a free-running voltage controlled
oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
control module that will automatically adjust the VDD_CPU voltage by
communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
-Currently only the I2C mode is supported by these bindings.
Required properties:
-- compatible : should be "nvidia,tegra124-dfll"
+- compatible : should be one of:
+ - "nvidia,tegra124-dfll": for Tegra124
+ - "nvidia,tegra210-dfll": for Tegra210
- reg : Defines the following set of registers, in the order listed:
- registers for the DFLL control logic.
- registers for the I2C output logic.
@@ -45,10 +46,31 @@ Required properties for the control loop parameters:
Optional properties for the control loop parameters:
- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+Optional properties for mode selection:
+- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C.
+
Required properties for I2C mode:
- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
-Example:
+Required properties for PWM mode:
+- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds.
+- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM
+ control is disabled and the PWM output is tristated. Note that this voltage is
+ configured in hardware, typically via a resistor divider.
+- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control
+ is enabled and PWM output is low. Hence, this is the minimum output voltage
+ that the regulator supports when PWM control is enabled.
+- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts
+ corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th
+ duty cycle would be: nvidia,pwm-min-microvolts +
+ nvidia,pwm-voltage-step-microvolts * 2.
+- pinctrl-0: I/O pad configuration when PWM control is enabled.
+- pinctrl-1: I/O pad configuration when PWM control is disabled.
+- pinctrl-names: must include the following entries:
+ - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled.
+ - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled.
+
+Example for I2C:
clock@70110000 {
compatible = "nvidia,tegra124-dfll";
@@ -76,3 +98,58 @@ clock@70110000 {
nvidia,i2c-fs-rate = <400000>;
};
+
+Example for PWM:
+
+clock@70110000 {
+ compatible = "nvidia,tegra124-dfll";
+ reg = <0 0x70110000 0 0x100>, /* DFLL control */
+ <0 0x70110000 0 0x100>, /* I2C output control */
+ <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+ <0 0x70110200 0 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA210_CLK_DFLL_REF>,
+ <&tegra_car TEGRA124_CLK_I2C5>;;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+
+ nvidia,sample-rate = <25000>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <6>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+
+ nvidia,pwm-min-microvolts = <708000>; /* 708mV */
+ nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+ nvidia,pwm-to-pmic;
+ nvidia,pwm-tristate-microvolts = <1000000>;
+ nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */
+
+ pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+ pinctrl-0 = <&dvfs_pwm_active_state>;
+ pinctrl-1 = <&dvfs_pwm_inactive_state>;
+};
+
+/* pinmux nodes added for completeness. Binding doc can be found in:
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ */
+
+pinmux: pinmux@700008d4 {
+ dvfs_pwm_active_state: dvfs_pwm_active {
+ dvfs_pwm_pbb1 {
+ nvidia,pins = "dvfs_pwm_pbb1";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+ dvfs_pwm_pbb1 {
+ nvidia,pins = "dvfs_pwm_pbb1";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index 87b4949e9bc8..944719bd586f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -16,6 +16,7 @@ Required properties :
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
"qcom,rpmcc-msm8996", "qcom,rpmcc"
+ "qcom,rpmcc-msm8998", "qcom,rpmcc"
"qcom,rpmcc-qcs404", "qcom,rpmcc"
- #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
index b1669fbfb740..03196d5ea515 100644
--- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
@@ -9,11 +9,9 @@ Required properties:
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- cpu_g: Clock mux for the fast CPU cluster.
- - cpu_lp: Clock mux for the low-power CPU cluster.
- pll_x: Fast PLL clocksource.
- pll_p: Auxiliary PLL used during fast PLL rate changes.
- dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
-- vdd-cpu-supply: Regulator for CPU voltage
Optional properties:
- clock-latency: Specify the possible maximum transition latency for clock,
@@ -31,13 +29,11 @@ cpus {
reg = <0>;
clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
- <&tegra_car TEGRA124_CLK_CCLK_LP>,
<&tegra_car TEGRA124_CLK_PLL_X>,
<&tegra_car TEGRA124_CLK_PLL_P>,
<&dfll>;
- clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
clock-latency = <300000>;
- vdd-cpu-supply: <&vdd_cpu>;
};
<...>
diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.txt b/Documentation/devicetree/bindings/crypto/samsung-slimsss.txt
new file mode 100644
index 000000000000..7ec9a5a7727a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.txt
@@ -0,0 +1,19 @@
+Samsung SoC SlimSSS (Slim Security SubSystem) module
+
+The SlimSSS module in Exynos5433 SoC supports the following:
+-- Feeder (FeedCtrl)
+-- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS
+-- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC
+
+Required properties:
+
+- compatible : Should contain entry for slimSSS version:
+ - "samsung,exynos5433-slim-sss" for Exynos5433 SoC.
+- reg : Offset and length of the register set for the module
+- interrupts : interrupt specifiers of SlimSSS module interrupts (one feed
+ control interrupt).
+
+- clocks : list of clock phandle and specifier pairs for all clocks listed in
+ clock-names property.
+- clock-names : list of device clock input names; should contain "pclk" and
+ "aclk" for slim-sss in Exynos5433.
diff --git a/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt
new file mode 100644
index 000000000000..aaa6c24c8e70
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt
@@ -0,0 +1,33 @@
+Meson specific Simple Framebuffer bindings
+
+This binding documents meson specific extensions to the simple-framebuffer
+bindings. The meson simplefb u-boot code relies on the devicetree containing
+pre-populated simplefb nodes.
+
+These extensions are intended so that u-boot can select the right node based
+on which pipeline is being used. As such they are solely intended for
+firmware / bootloader use, and the OS should ignore them.
+
+Required properties:
+- compatible: "amlogic,simple-framebuffer", "simple-framebuffer"
+- amlogic,pipeline, one of:
+ "vpu-cvbs"
+ "vpu-hdmi"
+
+Example:
+
+chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ simplefb_hdmi: framebuffer-hdmi {
+ compatible = "amlogic,simple-framebuffer",
+ "simple-framebuffer";
+ amlogic,pipeline = "vpu-hdmi";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ power-domains = <&pwrc_vpu>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
new file mode 100644
index 000000000000..02b226532ebd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.txt
@@ -0,0 +1,73 @@
+Device Tree bindings for Arm Komeda display driver
+
+Required properties:
+- compatible: Should be "arm,mali-d71"
+- reg: Physical base address and length of the registers in the system
+- interrupts: the interrupt line number of the device in the system
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+- clock-names: A list of clock names. It should contain:
+ - "mclk": for the main processor clock
+ - "pclk": for the APB interface clock
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Required properties for sub-node: pipeline@nq
+Each device contains one or two pipeline sub-nodes (at least one), each
+pipeline node should provide properties:
+- reg: Zero-indexed identifier for the pipeline
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+- clock-names: should contain:
+ - "pxclk": pixel clock
+ - "aclk": AXI interface clock
+
+- port: each pipeline connect to an encoder input port. The connection is
+ modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+ - memory-region: phandle to a node describing memory (see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+ to be used for the framebuffer; if not present, the framebuffer may
+ be located anywhere in memory.
+
+Example:
+/ {
+ ...
+
+ dp0: display@c00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d71";
+ reg = <0xc00000 0x20000>;
+ interrupts = <0 168 4>;
+ clocks = <&dpu_mclk>, <&dpu_aclk>;
+ clock-names = "mclk", "pclk";
+
+ dp0_pipe0: pipeline@0 {
+ clocks = <&fpgaosc2>, <&dpu_aclk>;
+ clock-names = "pxclk", "aclk";
+ reg = <0>;
+
+ port {
+ dp0_pipe0_out: endpoint {
+ remote-endpoint = <&db_dvi0_in>;
+ };
+ };
+ };
+
+ dp0_pipe1: pipeline@1 {
+ clocks = <&fpgaosc2>, <&dpu_aclk>;
+ clock-names = "pxclk", "aclk";
+ reg = <1>;
+
+ port {
+ dp0_pipe1_out: endpoint {
+ remote-endpoint = <&db_dvi1_in>;
+ };
+ };
+ };
+ };
+ ...
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
index f5725bb6c61c..525a4bfd8634 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
@@ -31,28 +31,7 @@ Required subnodes:
- one subnode per DSI device connected on the DSI bus. Each DSI device should
contain a reg property encoding its virtual channel.
-Cadence DPHY
-============
-
-Cadence DPHY block.
-
-Required properties:
-- compatible: should be set to "cdns,dphy".
-- reg: physical base address and length of the DPHY registers.
-- clocks: DPHY reference clocks.
-- clock-names: must contain "psm" and "pll_ref".
-- #phy-cells: must be set to 0.
-
-
Example:
- dphy0: dphy@fd0e0000{
- compatible = "cdns,dphy";
- reg = <0x0 0xfd0e0000 0x0 0x1000>;
- clocks = <&psm_clk>, <&pll_ref_clk>;
- clock-names = "psm", "pll_ref";
- #phy-cells = <0>;
- };
-
dsi0: dsi@fd0c0000 {
compatible = "cdns,dsi";
reg = <0x0 0xfd0c0000 0x0 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
index 50220190c203..60091db5dfa5 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
@@ -22,13 +22,11 @@ among others.
Required properties:
-- compatible: Must be one or more of the following
- - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer
- - "lvds-encoder" for a generic LVDS encoder device
+- compatible: Must be "lvds-encoder"
- When compatible with the generic version, nodes must list the
- device-specific version corresponding to the device first
- followed by the generic version.
+ Any encoder compatible with this generic binding, but with additional
+ properties not listed here, must list a device specific compatible first
+ followed by this generic compatible.
Required nodes:
@@ -44,8 +42,6 @@ Example
lvds-encoder {
compatible = "lvds-encoder";
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
index ba5469dd09f3..900a884ad9f5 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -8,6 +8,8 @@ Required properties:
- compatible : Shall contain one of
- "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+ - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders
+ - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders
- "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
- "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
- "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
@@ -25,7 +27,7 @@ Required properties:
- clock-names: Name of the clocks. This property is model-dependent.
- The functional clock, which mandatory for all models, shall be listed
first, and shall be named "fck".
- - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or
+ - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or
DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be
named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN
numerical index.
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt
index 527e236e9a2a..fee3c88e1a17 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt
@@ -10,7 +10,7 @@ Required properties:
Optional properties:
-- pwdn-gpios: Power down control GPIO
+- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low).
Required nodes:
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
new file mode 100644
index 000000000000..e575f996959a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
@@ -0,0 +1,55 @@
+Texas Instruments FPD-Link (LVDS) Serializer
+--------------------------------------------
+
+The DS90C185 and DS90C187 are low-power serializers for portable
+battery-powered applications that reduces the size of the RGB
+interface between the host GPU and the display.
+
+Required properties:
+
+- compatible: Should be
+ "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer
+ "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer
+
+Optional properties:
+
+- powerdown-gpios: Power down control GPIO (the PDB pin, active-low)
+
+Required nodes:
+
+The devices have two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for parallel input
+- Video port 1 for LVDS output
+
+
+Example
+-------
+
+lvds-encoder {
+ compatible = "ti,ds90c185", "lvds-encoder";
+
+ powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_enc_in: endpoint {
+ remote-endpoint = <&lcdc_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_enc_out: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt
new file mode 100644
index 000000000000..3439b38e60f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gmu.txt
@@ -0,0 +1,59 @@
+Qualcomm adreno/snapdragon GMU (Graphics management unit)
+
+The GMU is a programmable power controller for the GPU. the CPU controls the
+GMU which in turn handles power controls for the GPU.
+
+Required properties:
+- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu"
+ for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"
+ Note that you need to list the less specific "qcom,adreno-gmu"
+ for generic matches and the more specific identifier to identify
+ the specific device.
+- reg: Physical base address and length of the GMU registers.
+- reg-names: Matching names for the register regions
+ * "gmu"
+ * "gmu_pdc"
+ * "gmu_pdc_seg"
+- interrupts: The interrupt signals from the GMU.
+- interrupt-names: Matching names for the interrupts
+ * "hfi"
+ * "gmu"
+- clocks: phandles to the device clocks
+- clock-names: Matching names for the clocks
+ * "gmu"
+ * "cxo"
+ * "axi"
+ * "mnoc"
+- power-domains: should be <&clock_gpucc GPU_CX_GDSC>
+- iommus: phandle to the adreno iommu
+- operating-points-v2: phandle to the OPP operating points
+
+Example:
+
+/ {
+ ...
+
+ gmu: gmu@506a000 {
+ compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+ reg = <0x506a000 0x30000>,
+ <0xb280000 0x10000>,
+ <0xb480000 0x10000>;
+ reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+ clock-names = "gmu", "cxo", "axi", "memnoc";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ iommus = <&adreno_smmu 5>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index f8759145ce1a..aad1aef682f7 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -10,14 +10,23 @@ Required properties:
If "amd,imageon" is used, there should be no top level msm device.
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the gpu.
-- clocks: device clocks
+- clocks: device clocks (if applicable)
See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
+- clock-names: the following clocks are required by a3xx, a4xx and a5xx
+ cores:
* "core"
* "iface"
* "mem_iface"
+ For GMU attached devices the GPU clocks are not used and are not required. The
+ following devices should not list clocks:
+ - qcom,adreno-630.2
+- iommus: optional phandle to an adreno iommu instance
+- operating-points-v2: optional phandle to the OPP operating points
+- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
+ control the power for the GPU. Applicable targets:
+ - qcom,adreno-630.2
-Example:
+Example 3xx/4xx/a5xx:
/ {
...
@@ -37,3 +46,30 @@ Example:
<&mmcc MMSS_IMEM_AHB_CLK>;
};
};
+
+Example a6xx (with GMU):
+
+/ {
+ ...
+
+ gpu@5000000 {
+ compatible = "qcom,adreno-630.2", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+ reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+ /*
+ * Look ma, no clocks! The GPU clocks and power are
+ * controlled entirely by the GMU
+ */
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt
index bc6a0c858e23..bc6a0c858e23 100644
--- a/Documentation/devicetree/bindings/display/panel/auo,g101evn010
+++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt
new file mode 100644
index 000000000000..e5ca4ccd55ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel
+
+Required properties:
+- compatible: should be "innolux,ee101ia-01d"
+
+This binding is compatible with the lvds-panel binding, which is specified
+in panel-lvds.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt
new file mode 100644
index 000000000000..74ee7ea6b493
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt
@@ -0,0 +1,12 @@
+LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "lemaker,bl035-rgb-002"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt
new file mode 100644
index 000000000000..1639fb17a9f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt
@@ -0,0 +1,14 @@
+PDA 91-00156-A0 5.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "pda,91-00156-a0"
+- power-supply: this panel requires a single power supply. A phandle to a
+regulator needs to be specified here. Compatible with panel-common binding which
+is specified in the panel-common.txt in this directory.
+- backlight: this panel's backlight is controlled by an external backlight
+controller. A phandle to this controller needs to be specified here.
+Compatible with panel-common binding which is specified in the panel-common.txt
+in this directory.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
new file mode 100644
index 000000000000..ccd17597f1f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
@@ -0,0 +1,30 @@
+Sitronix ST7701 based LCD panels
+
+ST7701 designed for small and medium sizes of TFT LCD display, is
+capable of supporting up to 480RGBX864 in resolution. It provides
+several system interfaces like MIPI/RGB/SPI.
+
+Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+inbuilt ST7701 chip.
+
+Required properties:
+- compatible: must be "sitronix,st7701" and one of
+ * "techstar,ts8550b"
+- reset-gpios: a GPIO phandle for the reset pin
+
+Required properties for techstar,ts8550b:
+- reg: DSI virtual channel used by that screen
+- VCC-supply: analog regulator for MIPI circuit
+- IOVCC-supply: I/O system regulator
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+panel@0 {
+ compatible = "techstar,ts8550b", "sitronix,st7701";
+ reg = <0>;
+ VCC-supply = <&reg_dldo2>;
+ IOVCC-supply = <&reg_dldo2>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+};
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index 3c855d9f2719..aedb22b4d161 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -7,6 +7,7 @@ Required Properties:
- "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
- "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
- "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
+ - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
- "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
- "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
- "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -57,6 +58,7 @@ corresponding to each DU output.
R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - -
R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - -
R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 -
+ R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 -
R8A7779 (R-Car H1) DPAD 0 DPAD 1 - -
R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 -
R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - -
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index b79e5769f0ae..4f58c5a2d195 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -10,6 +10,7 @@ Required properties:
"rockchip,rk3126-vop";
"rockchip,px30-vop-lit";
"rockchip,px30-vop-big";
+ "rockchip,rk3066-vop";
"rockchip,rk3188-vop";
"rockchip,rk3288-vop";
"rockchip,rk3368-vop";
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
index f0a5090a3326..cd5c7186890a 100644
--- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt
@@ -20,7 +20,7 @@ Example:
backlight: backlight {
compatible = "gpio-backlight";
gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
- }
+ };
...
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index f426bdb42f18..31ab72cba3d4 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -156,6 +156,7 @@ Required properties:
* allwinner,sun6i-a31-tcon
* allwinner,sun6i-a31s-tcon
* allwinner,sun7i-a20-tcon
+ * allwinner,sun8i-a23-tcon
* allwinner,sun8i-a33-tcon
* allwinner,sun8i-a83t-tcon-lcd
* allwinner,sun8i-a83t-tcon-tv
@@ -276,6 +277,7 @@ Required properties:
- compatible: value must be one of:
* allwinner,sun6i-a31-drc
* allwinner,sun6i-a31s-drc
+ * allwinner,sun8i-a23-drc
* allwinner,sun8i-a33-drc
* allwinner,sun9i-a80-drc
- reg: base address and size of the memory-mapped region.
@@ -303,6 +305,7 @@ Required properties:
* allwinner,sun5i-a13-display-backend
* allwinner,sun6i-a31-display-backend
* allwinner,sun7i-a20-display-backend
+ * allwinner,sun8i-a23-display-backend
* allwinner,sun8i-a33-display-backend
* allwinner,sun9i-a80-display-backend
- reg: base address and size of the memory-mapped region.
@@ -360,6 +363,7 @@ Required properties:
* allwinner,sun5i-a13-display-frontend
* allwinner,sun6i-a31-display-frontend
* allwinner,sun7i-a20-display-frontend
+ * allwinner,sun8i-a23-display-frontend
* allwinner,sun8i-a33-display-frontend
* allwinner,sun9i-a80-display-frontend
- reg: base address and size of the memory-mapped region.
@@ -419,6 +423,7 @@ Required properties:
* allwinner,sun6i-a31-display-engine
* allwinner,sun6i-a31s-display-engine
* allwinner,sun7i-a20-display-engine
+ * allwinner,sun8i-a23-display-engine
* allwinner,sun8i-a33-display-engine
* allwinner,sun8i-a83t-display-engine
* allwinner,sun8i-h3-display-engine
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 593be44a53c9..9999255ac5b6 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -238,6 +238,9 @@ of the following host1x client modules:
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
- nvidia,edid: supplies a binary EDID blob
- nvidia,panel: phandle of a display panel
+ - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
+ of the SOR, identified by the cell's index, is mapped via the crossbar to
+ the pad specified by the cell's value.
Optional properties when driving an eDP output:
- nvidia,dpaux: phandle to a DispayPort AUX interface
diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt
index 6312fb00ce8d..eeb4e4d1771e 100644
--- a/Documentation/devicetree/bindings/dma/dma.txt
+++ b/Documentation/devicetree/bindings/dma/dma.txt
@@ -16,6 +16,9 @@ Optional properties:
- dma-channels: Number of DMA channels supported by the controller.
- dma-requests: Number of DMA request signals supported by the
controller.
+- dma-channel-mask: Bitmask of available DMA channels in ascending order
+ that are not reserved by firmware and are available to
+ the kernel. i.e. first channel corresponds to LSB.
Example:
@@ -29,6 +32,7 @@ Example:
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
+ dma-channel-mask = <0xfffe>
};
* DMA router
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
new file mode 100644
index 000000000000..6a0ff9059e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -0,0 +1,57 @@
+NXP Layerscape SoC qDMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible: Must be one of
+ "fsl,ls1021a-qdma": for LS1021A Board
+ "fsl,ls1043a-qdma": for ls1043A Board
+ "fsl,ls1046a-qdma": for ls1046A Board
+- reg: Should contain the register's base address and length.
+- interrupts: Should contain a reference to the interrupt used by this
+ device.
+- interrupt-names: Should contain interrupt names:
+ "qdma-queue0": the block0 interrupt
+ "qdma-queue1": the block1 interrupt
+ "qdma-queue2": the block2 interrupt
+ "qdma-queue3": the block3 interrupt
+ "qdma-error": the error interrupt
+- fsl,dma-queues: Should contain number of queues supported.
+- dma-channels: Number of DMA channels supported
+- block-number: the virtual block number
+- block-offset: the offset of different virtual block
+- status-sizes: status queue size of per virtual block
+- queue-sizes: command queue size of per virtual block, the size number
+ based on queues
+
+Optional properties:
+
+- dma-channels: Number of DMA channels supported by the controller.
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+Examples:
+
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error",
+ "qdma-queue0", "qdma-queue1";
+ dma-channels = <8>;
+ block-number = <2>;
+ block-offset = <0x1000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
index 4945aeac4dc4..10a2f15b08a3 100644
--- a/Documentation/devicetree/bindings/dma/k3dma.txt
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -3,7 +3,9 @@
See dma.txt first
Required properties:
-- compatible: Should be "hisilicon,k3-dma-1.0"
+- compatible: Must be one of
+- "hisilicon,k3-dma-1.0"
+- "hisilicon,hisi-pcm-asp-dma-1.0"
- reg: Should contain DMA registers location and length.
- interrupts: Should contain one interrupt shared by all channel
- #dma-cells: see dma.txt, should be 1, para number
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index db757df7057d..0bedceed1963 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -23,8 +23,6 @@ Deprecated properties:
Optional properties:
-- is_private: The device channels should be marked as private and not for by the
- general purpose DMA channel allocator. False if not passed.
- multi-block: Multi block transfers supported by hardware. Array property with
one cell per channel. 0: not supported, 1 (default): supported.
- snps,dma-protection-control: AHB HPROT[3:1] protection setting.
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
index 7a10fea2e51b..adccea9941f1 100644
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -31,7 +31,7 @@ DMA clients connected to the Spreadtrum DMA controller must use the format
described in the dma.txt file, using a two-cell specifier for each channel.
The two cells in order are:
1. A phandle pointing to the DMA controller.
-2. The channel id.
+2. The slave id.
spi0: spi@70a00000{
...
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 174af2c45e77..93b6d961dd4f 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -37,10 +37,11 @@ Required properties:
Required properties for VDMA:
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
-Optional properties:
-- xlnx,include-sg: Tells configured for Scatter-mode in
- the hardware.
Optional properties for AXI DMA:
+- xlnx,sg-length-width: Should be set to the width in bits of the length
+ register as configured in h/w. Takes values {8...26}. If the property
+ is missing or invalid then the default value 23 is used. This is the
+ maximum value that is supported by all IP versions.
- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
Optional properties for VDMA:
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
new file mode 100644
index 000000000000..6a0f3d90d682
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -0,0 +1,25 @@
+Aspeed AST2500 SoC EDAC node
+
+The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be "aspeed,ast2500-sdram-edac"
+- reg: sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+ edac: sdram@1e6e0000 {
+ compatible = "aspeed,ast2500-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
index f9a7c984274c..0e456bbc1213 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -75,6 +75,8 @@ Optional properties:
- address-width: number of address bits (one of 8, 16).
+ - num-addresses: total number of i2c slave addresses this device takes
+
Example:
eeprom@52 {
@@ -82,4 +84,5 @@ eeprom@52 {
reg = <0x52>;
pagesize = <32>;
wp-gpios = <&gpio1 3 0>;
+ num-addresses = <8>;
};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
new file mode 100644
index 000000000000..936fbdf12815
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
@@ -0,0 +1,27 @@
+* PTN5150 CC (Configuration Channel) Logic device
+
+PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+connector application with CC control logic detection and indication functions.
+It is interfaced to the host controller using an I2C interface.
+
+Required properties:
+- compatible: should be "nxp,ptn5150"
+- reg: specifies the I2C slave address of the device
+- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
+ connected to the PTN5150's INTB pin.
+- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
+ is used to control VBUS.
+- pinctrl-names : a pinctrl state named "default" must be defined.
+- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
+ control.
+
+Example:
+ ptn5150@1d {
+ compatible = "nxp,ptn5150";
+ reg = <0x1d>;
+ int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ptn5150_default>;
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
index 0c10802c8327..ff380dadb5f9 100644
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
@@ -8,7 +8,6 @@ which can create the interprocessor communication (IPC) between the CPU
and BPMP.
Required properties:
-- name : Should be bpmp
- compatible
Array of strings
One of:
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt
new file mode 100644
index 000000000000..68d814e8c09d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt
@@ -0,0 +1,35 @@
+NVIDIA Tegra210 Boot and Power Management Processor (BPMP)
+
+The Boot and Power Management Processor (BPMP) is a co-processor found
+in Tegra210 SoC. It is designed to handle the early stages of the boot
+process as well as to assisting in entering deep low power state
+(suspend to ram), and also offloading DRAM memory clock scaling on
+some platforms. The binding document defines the resources that would
+be used by the BPMP T210 firmware driver, which can create the
+interprocessor communication (IPC) between the CPU and BPMP.
+
+Required properties:
+- compatible
+ Array of strings
+ One of:
+ - "nvidia,tegra210-bpmp"
+- reg: physical base address and length for HW synchornization primitives
+ 1) base address and length to Tegra 'atomics' hardware
+ 2) base address and length to Tegra 'semaphore' hardware
+- interrupts: specifies the interrupt number for receiving messages ("rx")
+ and for triggering messages ("tx")
+
+Optional properties:
+- #clock-cells : Should be 1 for platforms where DRAM clock control is
+ offloaded to bpmp.
+
+Example:
+
+bpmp@70016000 {
+ compatible = "nvidia,tegra210-bpmp";
+ reg = <0x0 0x70016000 0x0 0x2000
+ 0x0 0x60001000 0x0 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
index f1e4a2ff47c5..f547bd4549fe 100644
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ b/Documentation/devicetree/bindings/gnss/gnss.txt
@@ -17,6 +17,7 @@ Required properties:
represents
Optional properties:
+- lna-supply : Separate supply for an LNA
- enable-gpios : GPIO used to enable the device
- timepulse-gpios : Time pulse GPIO
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
new file mode 100644
index 000000000000..80cb802813c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.txt
@@ -0,0 +1,35 @@
+Mediatek-based GNSS Receiver DT binding
+
+Mediatek chipsets are used in GNSS-receiver modules produced by several
+vendors and can use a UART interface.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be
+
+ "globaltop,pa6h"
+
+- vcc-supply : Main voltage regulator (pin name: VCC)
+
+Optional properties:
+
+- current-speed : Default UART baud rate
+- gnss-fix-gpios : GPIO used to determine device position fix state
+ (pin name: FIX, 3D_FIX)
+- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET)
+- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS)
+- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP)
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
index 648d183cdb77..f4252b6b660b 100644
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.txt
@@ -12,6 +12,7 @@ Required properties:
"fastrax,uc430"
"linx,r4"
+ "wi2wi,w2sg0004"
"wi2wi,w2sg0008i"
"wi2wi,w2sg0084i"
diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
new file mode 100644
index 000000000000..6e81f8b755c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
@@ -0,0 +1,20 @@
+Gateworks PLD GPIO controller bindings
+
+The GPIO controller should be a child node on an I2C bus,
+see: i2c/i2c.txt for details.
+
+Required properties:
+- compatible: Should be "gateworks,pld-gpio"
+- reg: I2C slave address
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the gpio number and
+ the second cell is used to specify optional parameters.
+
+Example:
+
+pld@56 {
+ compatible = "gateworks,pld-gpio";
+ reg = <0x56>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
index 93d98d09d92b..54040a2bfe3a 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
@@ -33,7 +33,7 @@ Required properties:
"sprd,sc9860-eic-latch",
"sprd,sc9860-eic-async",
"sprd,sc9860-eic-sync",
- "sprd,sc27xx-eic".
+ "sprd,sc2731-eic".
- reg: Define the base and range of the I/O address space containing
the GPIO controller registers.
- gpio-controller: Marks the device node as a GPIO controller.
@@ -86,7 +86,7 @@ Example:
};
pmic_eic: gpio@300 {
- compatible = "sprd,sc27xx-eic";
+ compatible = "sprd,sc2731-eic";
reg = <0x300>;
interrupt-parent = <&sc2731_pmic>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
index 4e3c550e319a..fb144e2b6522 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -16,6 +16,7 @@ Required properties:
nxp,pca9574
nxp,pca9575
nxp,pca9698
+ nxp,pcal6416
nxp,pcal6524
nxp,pcal9555a
maxim,max7310
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index f0ba154b5723..a8895d339bfe 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -67,6 +67,18 @@ Optional standard bitfield specifiers for the last cell:
https://en.wikipedia.org/wiki/Open_collector
- Bit 3: 0 means the output should be maintained during sleep/low-power mode
1 means the output state can be lost during sleep/low-power mode
+- Bit 4: 0 means no pull-up resistor should be enabled
+ 1 means a pull-up resistor should be enabled
+ This setting only applies to hardware with a simple on/off
+ control for pull-up configuration. If the hardware has more
+ elaborate pull-up configuration, it should be represented
+ using a pin control binding.
+- Bit 5: 0 means no pull-down resistor should be enabled
+ 1 means a pull-down resistor should be enabled
+ This setting only applies to hardware with a simple on/off
+ control for pull-down configuration. If the hardware has more
+ elaborate pull-down configuration, it should be represented
+ using a pin control binding.
1.1) GPIO specifier best practices
----------------------------------
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
new file mode 100644
index 000000000000..8dc41ed99685
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
@@ -0,0 +1,38 @@
+Intel IXP4xx XScale Networking Processors GPIO
+
+This GPIO controller is found in the Intel IXP4xx processors.
+It supports 16 GPIO lines.
+
+The interrupt portions of the GPIO controller is hierarchical:
+the synchronous edge detector is part of the GPIO block, but the
+actual enabling/disabling of the interrupt line is done in the
+main IXP4xx interrupt controller which has a 1:1 mapping for
+the first 12 GPIO lines to 12 system interrupts.
+
+The remaining 4 GPIO lines can not be used for receiving
+interrupts.
+
+The interrupt parent of this GPIO controller must be the
+IXP4xx interrupt controller.
+
+Required properties:
+
+- compatible : Should be
+ "intel,ixp4xx-gpio"
+- reg : Should contain registers location and length
+- gpio-controller : marks this as a GPIO controller
+- #gpio-cells : Should be 2, see gpio/gpio.txt
+- interrupt-controller : marks this as an interrupt controller
+- #interrupt-cells : a standard two-cell interrupt, see
+ interrupt-controller/interrupts.txt
+
+Example:
+
+gpio0: gpio@c8004000 {
+ compatible = "intel,ixp4xx-gpio";
+ reg = <0xc8004000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 3f128e4f95c6..ae63f09fda7d 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -13,6 +13,8 @@ Required properties:
+ allwinner,sun8i-h3-mali
+ allwinner,sun50i-a64-mali
+ allwinner,sun50i-h5-mali
+ + amlogic,meson8-mali
+ + amlogic,meson8b-mali
+ amlogic,meson-gxbb-mali
+ amlogic,meson-gxl-mali
+ rockchip,rk3036-mali
@@ -82,6 +84,10 @@ to specify one more vendor-specific compatible, among:
Required properties:
* resets: phandle to the reset line for the GPU
+ - amlogic,meson8-mali and amlogic,meson8b-mali
+ Required properties:
+ * resets: phandle to the reset line for the GPU
+
- Rockchip variants:
Required properties:
* resets: phandle to the reset line for the GPU
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
index 82cd1ed0be93..3aca2578da0b 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
@@ -2,9 +2,10 @@
Required properties:
- compatible : value should be one of the following:
- (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210
- (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412
- (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250
+ * "samsung,s5pv210-rotator" for Rotator IP in S5PV210
+ * "samsung,exynos4210-rotator" for Rotator IP in Exynos4210
+ * "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412
+ * "samsung,exynos5250-rotator" for Rotator IP in Exynos5250
- reg : Physical base address of the IP registers and length of memory
mapped region.
diff --git a/Documentation/devicetree/bindings/hwmon/ad741x.txt b/Documentation/devicetree/bindings/hwmon/ad741x.txt
new file mode 100644
index 000000000000..9102152c8410
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ad741x.txt
@@ -0,0 +1,15 @@
+* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings
+
+Required properties:
+- compatible: one of
+ "adi,ad7416"
+ "adi,ad7417"
+ "adi,ad7418"
+- reg: I2C address
+
+Example:
+
+hwmon@28 {
+ compatible = "adi,ad7418";
+ reg = <0x28>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/dps650ab.txt b/Documentation/devicetree/bindings/hwmon/dps650ab.txt
new file mode 100644
index 000000000000..76780e795899
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/dps650ab.txt
@@ -0,0 +1,11 @@
+Bindings for Delta Electronics DPS-650-AB power supply
+
+Required properties:
+- compatible : "delta,dps650ab"
+- reg : I2C address, one of 0x58, 0x59.
+
+Example:
+ dps650ab@58 {
+ compatible = "delta,dps650ab";
+ reg = <0x58>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/hih6130.txt b/Documentation/devicetree/bindings/hwmon/hih6130.txt
new file mode 100644
index 000000000000..2c43837af4c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/hih6130.txt
@@ -0,0 +1,12 @@
+Honeywell Humidicon HIH-6130 humidity/temperature sensor
+--------------------------------------------------------
+
+Requires node properties:
+- compatible : "honeywell,hi6130"
+- reg : the I2C address of the device. This is 0x27.
+
+Example:
+ hih6130@27 {
+ compatible = "honeywell,hih6130";
+ reg = <0x27>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
index a7b25caa2b8e..fa63b6171407 100644
--- a/Documentation/devicetree/bindings/hwmon/ina3221.txt
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -6,6 +6,16 @@ Texas Instruments INA3221 Device Tree Bindings
- reg: I2C address
Optional properties:
+ - ti,single-shot: This chip has two power modes: single-shot (chip takes one
+ measurement and then shuts itself down) and continuous (
+ chip takes continuous measurements). The continuous mode is
+ more reliable and suitable for hardware monitor type device,
+ but the single-shot mode is more power-friendly and useful
+ for battery-powered device which cares power consumptions
+ while still needs some measurements occasionally.
+ If this property is present, the single-shot mode will be
+ used, instead of the default continuous one for monitoring.
+
= The node contains optional child nodes for three channels =
= Each child node describes the information of input source =
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt
new file mode 100644
index 000000000000..12d8cf7cf592
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm75.txt
@@ -0,0 +1,37 @@
+*LM75 hwmon sensor.
+
+Required properties:
+- compatible: manufacturer and chip name, one of
+ "adi,adt75",
+ "dallas,ds1775",
+ "dallas,ds75",
+ "dallas,ds7505",
+ "gmt,g751",
+ "national,lm75",
+ "national,lm75a",
+ "national,lm75b",
+ "maxim,max6625",
+ "maxim,max6626",
+ "maxim,max31725",
+ "maxim,max31726",
+ "maxim,mcp980x",
+ "st,stds75",
+ "st,stlm75",
+ "microchip,tcn75",
+ "ti,tmp100",
+ "ti,tmp101",
+ "ti,tmp105",
+ "ti,tmp112",
+ "ti,tmp175",
+ "ti,tmp275",
+ "ti,tmp75",
+ "ti,tmp75c",
+
+- reg: I2C bus address of the device
+
+Example:
+
+sensor@48 {
+ compatible = "st,stlm75";
+ reg = <0x48>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index c6d533202d3e..49ca5d83ed13 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -6,6 +6,9 @@ Required properties:
- cooling-levels : PWM duty cycle values in a range from 0 to 255
which correspond to thermal cooling states
+Optional properties:
+- fan-supply : phandle to the regulator that provides power to the fan
+
Example:
fan0: pwm-fan {
compatible = "pwm-fan";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index e199695b1c96..ee4c32454198 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -10,6 +10,7 @@ Required properties:
"mediatek,mt6589-i2c": for MediaTek MT6589
"mediatek,mt7622-i2c": for MediaTek MT7622
"mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
+ "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
"mediatek,mt8173-i2c": for MediaTek MT8173
- reg: physical base address of the controller and dma base, length of memory
mapped region.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt b/Documentation/devicetree/bindings/i2c/i2c-xscale.txt
new file mode 100644
index 000000000000..dcc8390e0d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-xscale.txt
@@ -0,0 +1,20 @@
+i2c Controller on XScale platforms such as IOP3xx and IXP4xx
+
+Required properties:
+- compatible : Must be one of
+ "intel,iop3xx-i2c"
+ "intel,ixp4xx-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@c8011000 {
+ compatible = "intel,ixp4xx-i2c";
+ reg = <0xc8011000 0x18>;
+ interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index 2100e9af379c..e132394375a1 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -20,6 +20,10 @@ Optional properties:
- interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
interrupt line in use.
+ - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer.
+
+ - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer.
+
Example:
mma8453fc@1d {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
new file mode 100644
index 000000000000..d7b6241ca881
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
@@ -0,0 +1,65 @@
+Analog Devices AD7606 Simultaneous Sampling ADC
+
+Required properties for the AD7606:
+
+- compatible: Must be one of
+ * "adi,ad7605-4"
+ * "adi,ad7606-8"
+ * "adi,ad7606-6"
+ * "adi,ad7606-4"
+- reg: SPI chip select number for the device
+- spi-max-frequency: Max SPI frequency to use
+ see: Documentation/devicetree/bindings/spi/spi-bus.txt
+- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt
+- avcc-supply: phandle to the Avcc power supply
+- interrupts: IRQ line for the ADC
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- adi,conversion-start-gpios: must be the device tree identifier of the CONVST pin.
+ This logic input is used to initiate conversions on the analog
+ input channels. As the line is active high, it should be marked
+ GPIO_ACTIVE_HIGH.
+
+Optional properties:
+
+- reset-gpios: must be the device tree identifier of the RESET pin. If specified,
+ it will be asserted during driver probe. As the line is active high,
+ it should be marked GPIO_ACTIVE_HIGH.
+- standby-gpios: must be the device tree identifier of the STBY pin. This pin is used
+ to place the AD7606 into one of two power-down modes, Standby mode or
+ Shutdown mode. As the line is active low, it should be marked
+ GPIO_ACTIVE_LOW.
+- adi,first-data-gpios: must be the device tree identifier of the FRSTDATA pin.
+ The FRSTDATA output indicates when the first channel, V1, is
+ being read back on either the parallel, byte or serial interface.
+ As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
+- adi,range-gpios: must be the device tree identifier of the RANGE pin. The polarity on
+ this pin determines the input range of the analog input channels. If
+ this pin is tied to a logic high, the analog input range is ±10V for
+ all channels. If this pin is tied to a logic low, the analog input range
+ is ±5V for all channels. As the line is active high, it should be marked
+ GPIO_ACTIVE_HIGH.
+- adi,oversampling-ratio-gpios: must be the device tree identifier of the over-sampling
+ mode pins. As the line is active high, it should be marked
+ GPIO_ACTIVE_HIGH.
+
+Example:
+
+ adc@0 {
+ compatible = "adi,ad7606-8";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+
+ avcc-supply = <&adc_vref>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
+ &gpio 23 GPIO_ACTIVE_HIGH
+ &gpio 26 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
new file mode 100644
index 000000000000..9f5b88cf680d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
@@ -0,0 +1,41 @@
+Analog Devices AD7768-1 ADC device driver
+
+Required properties for the AD7768-1:
+
+- compatible: Must be "adi,ad7768-1"
+- reg: SPI chip select number for the device
+- spi-max-frequency: Max SPI frequency to use
+ see: Documentation/devicetree/bindings/spi/spi-bus.txt
+- clocks: phandle to the master clock (mclk)
+ see: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names: Must be "mclk".
+- interrupts: IRQ line for the ADC
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- vref-supply: vref supply can be used as reference for conversion
+- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables
+ synchronization of multiple devices that require simultaneous sampling.
+ A pulse is always required if the configuration is changed in any way, for example
+ if the filter decimation rate changes. As the line is active low, it should
+ be marked GPIO_ACTIVE_LOW.
+
+Optional properties:
+
+ - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during
+ driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+
+Example:
+
+ adc@0 {
+ compatible = "adi,ad7768-1";
+ reg = <0>;
+ spi-max-frequency = <2000000>;
+ spi-cpol;
+ spi-cpha;
+ vref-supply = <&adc_vref>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio>;
+ adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ clocks = <&ad7768_mclk>;
+ clock-names = "mclk";
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
index 325090e43ce6..75c775954102 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -23,6 +23,10 @@ Required properties:
- #io-channel-cells: must be 1, see ../iio-bindings.txt
Optional properties:
+- amlogic,hhi-sysctrl: phandle to the syscon which contains the 5th bit
+ of the TSC (temperature sensor coefficient) on
+ Meson8b and Meson8m2 (which used to calibrate the
+ temperature sensor)
- nvmem-cells: phandle to the temperature_calib eFuse cells
- nvmem-cell-names: if present (to enable the temperature sensor
calibration) this must contain "temperature_calib"
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
new file mode 100644
index 000000000000..f01159f20d87
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
@@ -0,0 +1,48 @@
+* Ingenic JZ47xx ADC controller IIO bindings
+
+Required properties:
+
+- compatible: Should be one of:
+ * ingenic,jz4725b-adc
+ * ingenic,jz4740-adc
+- reg: ADC controller registers location and length.
+- clocks: phandle to the SoC's ADC clock.
+- clock-names: Must be set to "adc".
+- #io-channel-cells: Must be set to <1> to indicate channels are selected
+ by index.
+
+ADC clients must use the format described in iio-bindings.txt, giving
+a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+Example:
+
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+
+adc: adc@10070000 {
+ compatible = "ingenic,jz4740-adc";
+ #io-channel-cells = <1>;
+
+ reg = <0x10070000 0x30>;
+
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+};
+
+adc-keys {
+ ...
+ compatible = "adc-keys";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ io-channel-names = "buttons";
+ ...
+};
+
+battery {
+ ...
+ compatible = "ingenic,jz4740-battery";
+ io-channels = <&adc INGENIC_ADC_BATTERY>;
+ io-channel-names = "battery";
+ ...
+};
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
index b3629d3a9adf..b3629d3a9adf 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
new file mode 100644
index 000000000000..eb939fe77836
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
@@ -0,0 +1,24 @@
+Nuvoton NPCM Analog to Digital Converter (ADC)
+
+The NPCM ADC is a 10-bit converter for eight channel inputs.
+
+Required properties:
+- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
+- reg: specifies physical base address and size of the registers.
+- interrupts: Contain the ADC interrupt with flags for falling edge.
+
+Optional properties:
+- clocks: phandle of ADC reference clock, in case the clock is not
+ added the ADC will use the default ADC sample rate.
+- vref-supply: The regulator supply ADC reference voltage, in case the
+ vref-supply is not added the ADC will use internal voltage
+ reference.
+
+Example:
+
+adc: adc@f000c000 {
+ compatible = "nuvoton,npcm750-adc";
+ reg = <0xf000c000 0x8>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_ADC>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
index a10c1f89037d..e1fe02f3e3e9 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
@@ -11,11 +11,13 @@ New driver handles the following
Required properties:
- compatible: Must be "samsung,exynos-adc-v1"
- for exynos4412/5250 controllers.
+ for Exynos5250 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
Must be "samsung,exynos3250-adc" for
controllers compatible with ADC of Exynos3250.
+ Must be "samsung,exynos4212-adc" for
+ controllers compatible with ADC of Exynos4212 and Exynos4412.
Must be "samsung,exynos7-adc" for
the ADC in Exynos7 and compatibles
Must be "samsung,s3c2410-adc" for
diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
new file mode 100644
index 000000000000..480e66422625
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
@@ -0,0 +1,21 @@
+STMPE ADC driver
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-adc"
+
+Optional properties:
+Note that the ADC is shared with the STMPE touchscreen. ADC related settings
+have to be done in the mfd.
+- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
+ requestable due to different usage (e.g. touch)
+
+Node name must be stmpe_adc and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
new file mode 100644
index 000000000000..ecf807bb32f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
@@ -0,0 +1,25 @@
+* Texas Instruments' ads124s08 and ads124s06 ADC chip
+
+Required properties:
+ - compatible :
+ "ti,ads124s08"
+ "ti,ads124s06"
+ - reg : spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency : Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+ - spi-cpha : Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - reset-gpios : GPIO pin used to reset the device.
+
+Example:
+adc@0 {
+ compatible = "ti,ads124s08";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
new file mode 100644
index 000000000000..7f3827cfb2ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
@@ -0,0 +1,11 @@
+Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
+
+Required properties:
+- compatible: must be "bosch,bme680"
+
+Example:
+
+bme680@76 {
+ compatible = "bosch,bme680";
+ reg = <0x76>;
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 000000000000..7b5f06f324c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
@@ -0,0 +1,20 @@
+* Plantower PMS7003 particulate matter sensor
+
+Required properties:
+- compatible: must be "plantower,pms7003"
+- vcc-supply: phandle to the regulator that provides power to the sensor
+
+Optional properties:
+- plantower,set-gpios: phandle to the GPIO connected to the SET line
+- reset-gpios: phandle to the GPIO connected to the RESET line
+
+Refer to serial/slave-device.txt for generic serial attached device bindings.
+
+Example:
+
+&uart0 {
+ air-pollution-sensor {
+ compatible = "plantower,pms7003";
+ vcc-supply = <&reg_vcc5v0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
new file mode 100644
index 000000000000..5844ed58173c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
@@ -0,0 +1,15 @@
+* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor
+
+Required properties:
+
+ - compatible: must be one of
+ "sensirion,sgp30"
+ "sensirion,sgpc3"
+ - reg: the I2C address of the sensor
+
+Example:
+
+gas@58 {
+ compatible = "sensirion,sgp30";
+ reg = <0x58>;
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt
new file mode 100644
index 000000000000..6eee2709b5b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt
@@ -0,0 +1,12 @@
+* Sensirion SPS30 particulate matter sensor
+
+Required properties:
+- compatible: must be "sensirion,sps30"
+- reg: the I2C address of the sensor
+
+Example:
+
+sps30@69 {
+ compatible = "sensirion,sps30";
+ reg = <0x69>;
+};
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
new file mode 100644
index 000000000000..639c94ed83e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -0,0 +1,28 @@
+* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
+
+The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
+12-bit monotonicity performance over the industrial temperature range.
+Is is programmable through an SPI interface.
+
+The internal DACs are loaded when the LOADDACS pin is pulled down.
+
+http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+
+Required Properties:
+- compatible: Should be one of:
+ "ti,dac7612"
+ "ti,dac7612u"
+ "ti,dac7612ub"
+- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional Properties:
+- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
+- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ dac@1 {
+ compatible = "ti,dac7612";
+ reg = <0x1>;
+ ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt b/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt
new file mode 100644
index 000000000000..5ff38728ff91
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt
@@ -0,0 +1,26 @@
+Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer
+
+https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf
+https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf
+
+Required properties:
+ - compatible : should be one of
+ "adi,ad5933"
+ "adi,ad5934"
+ - reg : the I2C address.
+ - vdd-supply : The regulator supply for DVDD, AVDD1 and AVDD2 when they
+ are connected together.
+
+Optional properties:
+- clocks : external clock reference.
+- clock-names : must be "mclk" if clocks is set.
+
+Example for a I2C device node:
+
+ impedance-analyzer@0d {
+ compatible = "adi,adxl345";
+ reg = <0x0d>;
+ vdd-supply = <&vdd_supply>;
+ clocks = <&ref_clk>;
+ clock-names = "mclk";
+ };
diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
index 0c1c105fb503..900c169de00f 100644
--- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
+++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
@@ -9,9 +9,11 @@ Required properties:
- spi-max-frequency : set maximum clock frequency (only for SPI)
Optional properties:
- - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW
+ - interrupts : interrupt mapping for IRQ
- interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
input, set to "INT2" if INT2 pin should be used instead
+ - drive-open-drain : set if the specified interrupt pin should be configured as
+ open drain. If not set, defaults to push-pull.
Examples:
@@ -20,7 +22,7 @@ bmi160@68 {
reg = <0x68>;
interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "INT1";
};
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index 6ab9a9d196b0..268bf7568e19 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -11,6 +11,7 @@ Required properties:
"invensense,mpu9250"
"invensense,mpu9255"
"invensense,icm20608"
+ "invensense,icm20602"
- reg : the I2C address of the sensor
- interrupts: interrupt mapping for IRQ. It should be configured with flags
IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
diff --git a/Documentation/devicetree/bindings/iio/light/max44009.txt b/Documentation/devicetree/bindings/iio/light/max44009.txt
new file mode 100644
index 000000000000..4a98848e35c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/max44009.txt
@@ -0,0 +1,24 @@
+* MAX44009 Ambient Light Sensor
+
+Required properties:
+
+- compatible: should be "maxim,max44009"
+- reg: the I2C address of the device (default is <0x4a>)
+
+Optional properties:
+
+- interrupts: interrupt mapping for GPIO IRQ. Should be configured with
+ IRQ_TYPE_EDGE_FALLING.
+
+Refer to interrupt-controller/interrupts.txt for generic interrupt client
+node bindings.
+
+Example:
+
+light-sensor@4a {
+ compatible = "maxim,max44009";
+ reg = <0x4a>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index ddcb95509599..52ee4baec6f0 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -77,3 +77,4 @@ Pressure sensors:
- st,lps22hb-press
- st,lps33hw
- st,lps35hw
+- st,lps22hh
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 0c252d9306da..ef2ae729718f 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -1,13 +1,19 @@
Samsung tm2-touchkey
Required properties:
-- compatible: must be "cypress,tm2-touchkey"
+- compatible:
+ * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
+ * "cypress,midas-touchkey" - for the touchkey found on midas boards
+ * "cypress,aries-touchkey" - for the touchkey found on aries boards
- reg: I2C address of the chip.
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
- vcc-supply : internal regulator output. 1.8V
- vdd-supply : power supply for IC 3.3V
+Optional properties:
+- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK
+
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
Example:
@@ -21,5 +27,6 @@ Example:
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
vcc-supply=<&ldo32_reg>;
vdd-supply=<&ldo33_reg>;
+ linux,keycodes = <KEY_PHONE KEY_BACK>;
};
};
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
new file mode 100644
index 000000000000..b2a76301e632
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
@@ -0,0 +1,25 @@
+Ilitek ILI210x/ILI251x touchscreen controller
+
+Required properties:
+- compatible:
+ ilitek,ili210x for ILI210x
+ ilitek,ili251x for ILI251x
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchscreen's IRQ output
+ See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
+Example:
+
+ touchscreen@41 {
+ compatible = "ilitek,ili251x";
+ reg = <0x41>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
new file mode 100644
index 000000000000..8dcf014ef2e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/msm-vibrator.txt
@@ -0,0 +1,36 @@
+* Device tree bindings for the Qualcomm MSM vibrator
+
+Required properties:
+
+ - compatible: Should be one of
+ "qcom,msm8226-vibrator"
+ "qcom,msm8974-vibrator"
+ - reg: the base address and length of the IO memory for the registers.
+ - pinctrl-names: set to default.
+ - pinctrl-0: phandles pointing to pin configuration nodes. See
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+ - clock-names: set to pwm
+ - clocks: phandle of the clock. See
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ - enable-gpios: GPIO that enables the vibrator.
+
+Optional properties:
+
+ - vcc-supply: phandle to the regulator that provides power to the sensor.
+
+Example from a LG Nexus 5 (hammerhead) phone:
+
+vibrator@fd8c3450 {
+ reg = <0xfd8c3450 0x400>;
+ compatible = "qcom,msm8974-vibrator";
+
+ vcc-supply = <&pm8941_l19>;
+
+ clocks = <&mmcc CAMSS_GP1_CLK>;
+ clock-names = "pwm";
+
+ enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_pin>;
+};
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
new file mode 100644
index 000000000000..4494613ae7ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
@@ -0,0 +1,28 @@
+STMicroelectronics STPMIC1 Onkey
+
+Required properties:
+
+- compatible = "st,stpmic1-onkey";
+- interrupts: interrupt line to use
+- interrupt-names = "onkey-falling", "onkey-rising"
+ onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
+ onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
+
+Optional properties:
+
+- st,onkey-clear-cc-flag: onkey is able power on after an
+ over-current shutdown event.
+- st,onkey-pu-inactive: onkey pull up is not active
+- power-off-time-sec: Duration in seconds which the key should be kept
+ pressed for device to power off automatically (from 1 to 16 seconds).
+ see See Documentation/devicetree/bindings/input/keys.txt
+
+Example:
+
+onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupt-parent = <&pmic>;
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index da2dc5d6c98b..870b8c5cce9b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -1,11 +1,12 @@
FocalTech EDT-FT5x06 Polytouch driver
=====================================
-There are 3 variants of the chip for various touch panel sizes
+There are 5 variants of the chip for various touch panel sizes
FT5206GE1 2.8" .. 3.8"
FT5306DE4 4.3" .. 7"
FT5406EE8 7" .. 8.9"
FT5506EEG 7" .. 8.9"
+FT5726NEI 5.7” .. 11.6"
The software interface is identical for all those chips, so that
currently there is no need for the driver to distinguish between the
@@ -19,6 +20,7 @@ Required properties:
or: "edt,edt-ft5306"
or: "edt,edt-ft5406"
or: "edt,edt-ft5506"
+ or: "evervision,ev-ft5726"
or: "focaltech,ft6236"
- reg: I2C slave address of the chip (0x38)
@@ -42,6 +44,15 @@ Optional properties:
- offset: allows setting the edge compensation in the range from
0 to 31.
+
+ - offset-x: Same as offset, but applies only to the horizontal position.
+ Range from 0 to 80, only supported by evervision,ev-ft5726
+ devices.
+
+ - offset-y: Same as offset, but applies only to the vertical position.
+ Range from 0 to 80, only supported by evervision,ev-ft5726
+ devices.
+
- touchscreen-size-x : See touchscreen.txt
- touchscreen-size-y : See touchscreen.txt
- touchscreen-fuzz-x : See touchscreen.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index f7e95c52f3c7..8cf0b4d38a7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
Required properties:
- compatible : Should be "goodix,gt1151"
+ or "goodix,gt5688"
or "goodix,gt911"
or "goodix,gt9110"
or "goodix,gt912"
@@ -18,11 +19,14 @@ Optional properties:
- irq-gpios : GPIO pin used for IRQ. The driver uses the
interrupt gpio pin as output to reset the device.
- reset-gpios : GPIO pin used for reset
-
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
- (swapping is done after inverting the axis)
+ - touchscreen-inverted-x
+ - touchscreen-inverted-y
+ - touchscreen-size-x
+ - touchscreen-size-y
+ - touchscreen-swapped-x-y
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
index 64ad48b824a2..019373253b28 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -1,13 +1,17 @@
-* Sitronix st1232 touchscreen controller
+* Sitronix st1232 or st1633 touchscreen controller
Required properties:
-- compatible: must be "sitronix,st1232"
+- compatible: must contain one of
+ * "sitronix,st1232"
+ * "sitronix,st1633"
- reg: I2C address of the chip
- interrupts: interrupt to which the chip is connected
Optional properties:
- gpios: a phandle to the reset GPIO
+For additional optional properties see: touchscreen.txt
+
Example:
i2c@00000000 {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index 127baa31a77a..c549924603d2 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -5,39 +5,105 @@ Required properties:
- compatible: "st,stmpe-ts"
Optional properties:
-- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
- 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
- -> 144 clocks), recommended is 4.
-- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
-- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
- reference)
-- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
-- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
- samples, 3 -> 8 samples)
-- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
- 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
- is 3
-- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
- -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
-- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
- the fractional part) recommended is 7
-- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
- mA max, 1 -> 50 mA typical 80 mA max)
+- st,ave-ctrl : Sample average control
+ 0 -> 1 sample
+ 1 -> 2 samples
+ 2 -> 4 samples
+ 3 -> 8 samples
+- st,touch-det-delay : Touch detect interrupt delay (recommended is 3)
+ 0 -> 10 us
+ 1 -> 50 us
+ 2 -> 100 us
+ 3 -> 500 us
+ 4 -> 1 ms
+ 5 -> 5 ms
+ 6 -> 10 ms
+ 7 -> 50 ms
+- st,settling : Panel driver settling time (recommended is 2)
+ 0 -> 10 us
+ 1 -> 100 us
+ 2 -> 500 us
+ 3 -> 1 ms
+ 4 -> 5 ms
+ 5 -> 10 ms
+ 6 -> 50 ms
+ 7 -> 100 ms
+- st,fraction-z : Length of the fractional part in z (recommended is 7)
+ (fraction-z ([0..7]) = Count of the fractional part)
+- st,i-drive : current limit value of the touchscreen drivers
+ 0 -> 20 mA (typical 35mA max)
+ 1 -> 50 mA (typical 80 mA max)
+
+Optional properties common with MFD (deprecated):
+ - st,sample-time : ADC conversion time in number of clock.
+ 0 -> 36 clocks
+ 1 -> 44 clocks
+ 2 -> 56 clocks
+ 3 -> 64 clocks
+ 4 -> 80 clocks (recommended)
+ 5 -> 96 clocks
+ 6 -> 124 clocks
+ - st,mod-12b : ADC Bit mode
+ 0 -> 10bit ADC
+ 1 -> 12bit ADC
+ - st,ref-sel : ADC reference source
+ 0 -> internal
+ 1 -> external
+ - st,adc-freq : ADC Clock speed
+ 0 -> 1.625 MHz
+ 1 -> 3.25 MHz
+ 2 || 3 -> 6.5 MHz
Node name must be stmpe_touchscreen and should be child node of stmpe node to
which it belongs.
+Note that common ADC settings of stmpe_touchscreen (child) will take precedence
+over the settings done in MFD.
+
Example:
+stmpe811@41 {
+ compatible = "st,stmpe811";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ /* Common ADC settings */
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <1>;
- st,touch-det-delay = <2>;
- st,settling = <2>;
+ reg = <0>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 7 length fractional part in z */
st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
st,i-drive = <1>;
};
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..0ebe6dd043c7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -1,10 +1,17 @@
* Semtech SX8654 I2C Touchscreen Controller
Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+ "semtech,sx8650"
+ "semtech,sx8654"
+ "semtech,sx8655"
+ "semtech,sx8656"
- reg: i2c slave address
- interrupts: touch controller interrupt
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
Example:
sx8654@48 {
@@ -12,4 +19,5 @@ Example:
reg = <0x48>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
index b1163bf97146..aad5e34965eb 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -2,7 +2,12 @@
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Required properties:
+- mfd
+ compatible: Should be
+ "ti,am3359-tscadc" for AM335x/AM437x SoCs
+ "ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
- child "tsc"
+ compatible: Should be "ti,am3359-tsc".
ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
support on the platform.
ti,x-plate-resistance: X plate resistance
@@ -25,6 +30,9 @@ Required properties:
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
XP = 0, XN = 1, YP = 2, YN = 3.
- child "adc"
+ compatible: Should be
+ "ti,am3359-adc" for AM335x/AM437x SoCs
+ "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
ti,adc-channels: List of analog inputs available for ADC.
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
new file mode 100644
index 000000000000..5a3c575b387a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -0,0 +1,60 @@
+Interconnect Provider Device Tree Bindings
+=========================================
+
+The purpose of this document is to define a common set of generic interconnect
+providers/consumers properties.
+
+
+= interconnect providers =
+
+The interconnect provider binding is intended to represent the interconnect
+controllers in the system. Each provider registers a set of interconnect
+nodes, which expose the interconnect related capabilities of the interconnect
+to consumer drivers. These capabilities can be throughput, latency, priority
+etc. The consumer drivers set constraints on interconnect path (or endpoints)
+depending on the use case. Interconnect providers can also be interconnect
+consumers, such as in the case where two network-on-chip fabrics interface
+directly.
+
+Required properties:
+- compatible : contains the interconnect provider compatible string
+- #interconnect-cells : number of cells in a interconnect specifier needed to
+ encode the interconnect node id
+
+Example:
+
+ snoc: interconnect@580000 {
+ compatible = "qcom,msm8916-snoc";
+ #interconnect-cells = <1>;
+ reg = <0x580000 0x14000>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+
+= interconnect consumers =
+
+The interconnect consumers are device nodes which dynamically express their
+bandwidth requirements along interconnect paths they are connected to. There
+can be multiple interconnect providers on a SoC and the consumer may consume
+multiple paths from different providers depending on use case and the
+components it has to interact with.
+
+Required properties:
+interconnects : Pairs of phandles and interconnect provider specifier to denote
+ the edge source and destination ports of the interconnect path.
+
+Optional properties:
+interconnect-names : List of interconnect path name strings sorted in the same
+ order as the interconnects property. Consumers drivers will use
+ interconnect-names to match interconnect paths with interconnect
+ specifier pairs.
+
+Example:
+
+ sdhci@7864000 {
+ ...
+ interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
+ interconnect-names = "sdhc-mem";
+ };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
new file mode 100644
index 000000000000..5c4f1d911630
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
@@ -0,0 +1,24 @@
+Qualcomm SDM845 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+SDM845 interconnect providers support system bandwidth requirements through
+RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+able to communicate with the BCM through the Resource State Coordinator (RSC)
+associated with each execution environment. Provider nodes must reside within
+an RPMh device node pertaining to their RSC and each provider maps to a single
+RPMh resource.
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "qcom,sdm845-rsc-hlos"
+- #interconnect-cells : should contain 1
+
+Examples:
+
+apps_rsc: rsc {
+ rsc_hlos: interconnect {
+ compatible = "qcom,sdm845-rsc-hlos";
+ #interconnect-cells = <1>;
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
deleted file mode 100644
index a3be5298a5eb..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ /dev/null
@@ -1,175 +0,0 @@
-* ARM Generic Interrupt Controller, version 3
-
-AArch64 SMP cores are often associated with a GICv3, providing Private
-Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
-Software Generated Interrupts (SGI), and Locality-specific Peripheral
-Interrupts (LPI).
-
-Main node required properties:
-
-- compatible : should at least contain "arm,gic-v3" or either
- "qcom,msm8996-gic-v3", "arm,gic-v3" for msm8996 SoCs
- to address SoC specific bugs/quirks
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. Must be a single cell with a value of at least 3.
- If the system requires describing PPI affinity, then the value must
- be at least 4.
-
- The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
- interrupts. Other values are reserved for future use.
-
- The 2nd cell contains the interrupt number for the interrupt type.
- SPI interrupts are in the range [0-987]. PPI interrupts are in the
- range [0-15].
-
- The 3rd cell is the flags, encoded as follows:
- bits[3:0] trigger type and level flags.
- 1 = edge triggered
- 4 = level triggered
-
- The 4th cell is a phandle to a node describing a set of CPUs this
- interrupt is affine to. The interrupt must be a PPI, and the node
- pointed must be a subnode of the "ppi-partitions" subnode. For
- interrupt types other than PPI or PPIs that are not partitionned,
- this cell must be zero. See the "ppi-partitions" node description
- below.
-
- Cells 5 and beyond are reserved for future use and must have a value
- of 0 if present.
-
-- reg : Specifies base physical address(s) and size of the GIC
- registers, in the following order:
- - GIC Distributor interface (GICD)
- - GIC Redistributors (GICR), one range per redistributor region
- - GIC CPU interface (GICC)
- - GIC Hypervisor interface (GICH)
- - GIC Virtual CPU interface (GICV)
-
- GICC, GICH and GICV are optional.
-
-- interrupts : Interrupt source of the VGIC maintenance interrupt.
-
-Optional
-
-- redistributor-stride : If using padding pages, specifies the stride
- of consecutive redistributors. Must be a multiple of 64kB.
-
-- #redistributor-regions: The number of independent contiguous regions
- occupied by the redistributors. Required if more than one such
- region is present.
-
-- msi-controller: Boolean property. Identifies the node as an MSI
- controller. Only present if the Message Based Interrupt
- functionnality is being exposed by the HW, and the mbi-ranges
- property present.
-
-- mbi-ranges: A list of pairs <intid span>, where "intid" is the first
- SPI of a range that can be used an MBI, and "span" the size of that
- range. Multiple ranges can be provided. Requires "msi-controller" to
- be set.
-
-- mbi-alias: Address property. Base address of an alias of the GICD
- region containing only the {SET,CLR}SPI registers to be used if
- isolation is required, and if supported by the HW.
-
-Sub-nodes:
-
-PPI affinity can be expressed as a single "ppi-partitions" node,
-containing a set of sub-nodes, each with the following property:
-- affinity: Should be a list of phandles to CPU nodes (as described in
- Documentation/devicetree/bindings/arm/cpus.yaml).
-
-GICv3 has one or more Interrupt Translation Services (ITS) that are
-used to route Message Signalled Interrupts (MSI) to the CPUs.
-
-These nodes must have the following properties:
-- compatible : Should at least contain "arm,gic-v3-its".
-- msi-controller : Boolean property. Identifies the node as an MSI controller
-- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device
- which will generate the MSI.
-- reg: Specifies the base physical address and size of the ITS
- registers.
-
-Optional:
-- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
- address and size of the pre-ITS window.
-
-The main GIC node must contain the appropriate #address-cells,
-#size-cells and ranges properties for the reg property of all ITS
-nodes.
-
-Examples:
-
- gic: interrupt-controller@2cf00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- reg = <0x0 0x2f000000 0 0x10000>, // GICD
- <0x0 0x2f100000 0 0x200000>, // GICR
- <0x0 0x2c000000 0 0x2000>, // GICC
- <0x0 0x2c010000 0 0x2000>, // GICH
- <0x0 0x2c020000 0 0x2000>; // GICV
- interrupts = <1 9 4>;
-
- msi-controller;
- mbi-ranges = <256 128>;
-
- gic-its@2c200000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0x2c200000 0 0x20000>;
- };
- };
-
- gic: interrupt-controller@2c010000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- redistributor-stride = <0x0 0x40000>; // 256kB stride
- #redistributor-regions = <2>;
- reg = <0x0 0x2c010000 0 0x10000>, // GICD
- <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31
- <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63
- <0x0 0x2c040000 0 0x2000>, // GICC
- <0x0 0x2c060000 0 0x2000>, // GICH
- <0x0 0x2c080000 0 0x2000>; // GICV
- interrupts = <1 9 4>;
-
- gic-its@2c200000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0x2c200000 0 0x20000>;
- };
-
- gic-its@2c400000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0x2c400000 0 0x20000>;
- };
-
- ppi-partitions {
- part0: interrupt-partition-0 {
- affinity = <&cpu0 &cpu2>;
- };
-
- part1: interrupt-partition-1 {
- affinity = <&cpu1 &cpu3>;
- };
- };
- };
-
-
- device@0 {
- reg = <0 0 0 4>;
- interrupts = <1 1 4 &part0>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
new file mode 100644
index 000000000000..c34df35a25fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 3
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@arm.com>
+
+description: |
+ AArch64 SMP cores are often associated with a GICv3, providing Private
+ Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+ Software Generated Interrupts (SGI), and Locality-specific Peripheral
+ Interrupts (LPI).
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,msm8996-gic-v3
+ - const: arm,gic-v3
+ - const: arm,gic-v3
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1, 2 ]
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ "#interrupt-cells":
+ description: |
+ Specifies the number of cells needed to encode an interrupt source.
+ Must be a single cell with a value of at least 3.
+ If the system requires describing PPI affinity, then the value must
+ be at least 4.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts. Other values are reserved for future use.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = edge triggered
+ 4 = level triggered
+
+ The 4th cell is a phandle to a node describing a set of CPUs this
+ interrupt is affine to. The interrupt must be a PPI, and the node
+ pointed must be a subnode of the "ppi-partitions" subnode. For
+ interrupt types other than PPI or PPIs that are not partitionned,
+ this cell must be zero. See the "ppi-partitions" node description
+ below.
+
+ Cells 5 and beyond are reserved for future use and must have a value
+ of 0 if present.
+ enum: [ 3, 4 ]
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC
+ registers, in the following order:
+ - GIC Distributor interface (GICD)
+ - GIC Redistributors (GICR), one range per redistributor region
+ - GIC CPU interface (GICC)
+ - GIC Hypervisor interface (GICH)
+ - GIC Virtual CPU interface (GICV)
+
+ GICC, GICH and GICV are optional.
+ minItems: 2
+ maxItems: 4096 # Should be enough?
+
+ interrupts:
+ description:
+ Interrupt source of the VGIC maintenance interrupt.
+ maxItems: 1
+
+ redistributor-stride:
+ description:
+ If using padding pages, specifies the stride of consecutive
+ redistributors. Must be a multiple of 64kB.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint64
+ - multipleOf: 0x10000
+ exclusiveMinimum: 0
+
+ "#redistributor-regions":
+ description:
+ The number of independent contiguous regions occupied by the
+ redistributors. Required if more than one such region is present.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - maximum: 4096 # Should be enough?
+
+ msi-controller:
+ description:
+ Only present if the Message Based Interrupt functionnality is
+ being exposed by the HW, and the mbi-ranges property present.
+
+ mbi-ranges:
+ description:
+ A list of pairs <intid span>, where "intid" is the first SPI of a range
+ that can be used an MBI, and "span" the size of that range. Multiple
+ ranges can be provided.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ mbi-alias:
+ description:
+ Address property. Base address of an alias of the GICD region containing
+ only the {SET,CLR}SPI registers to be used if isolation is required,
+ and if supported by the HW.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 1
+ maxItems: 2
+
+ ppi-partitions:
+ type: object
+ description:
+ PPI affinity can be expressed as a single "ppi-partitions" node,
+ containing a set of sub-nodes.
+ patternProperties:
+ "^interrupt-partition-[0-9]+$":
+ properties:
+ affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Should be a list of phandles to CPU nodes (as described in
+ Documentation/devicetree/bindings/arm/cpus.yaml).
+
+ required:
+ - affinity
+
+dependencies:
+ mbi-ranges: [ msi-controller ]
+ msi-controller: [ mbi-ranges ]
+
+required:
+ - compatible
+ - interrupts
+ - reg
+
+patternProperties:
+ "^gic-its@": false
+ "^interrupt-controller@[0-9a-f]+$": false
+ # msi-controller is preferred, but allow other names
+ "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
+ type: object
+ description:
+ GICv3 has one or more Interrupt Translation Services (ITS) that are
+ used to route Message Signalled Interrupts (MSI) to the CPUs.
+ properties:
+ compatible:
+ const: arm,gic-v3-its
+
+ msi-controller: true
+
+ "#msi-cells":
+ description:
+ The single msi-cell is the DeviceID of the device which will generate
+ the MSI.
+ const: 1
+
+ reg:
+ description:
+ Specifies the base physical address and size of the ITS registers.
+ maxItems: 1
+
+ socionext,synquacer-pre-its:
+ description:
+ (u32, u32) tuple describing the untranslated
+ address and size of the pre-ITS window.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - compatible
+ - msi-controller
+ - "#msi-cells"
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ gic: interrupt-controller@2cf00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x2f000000 0x10000>, // GICD
+ <0x2f100000 0x200000>, // GICR
+ <0x2c000000 0x2000>, // GICC
+ <0x2c010000 0x2000>, // GICH
+ <0x2c020000 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ msi-controller;
+ mbi-ranges = <256 128>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+ };
+
+ interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ redistributor-stride = <0x0 0x40000>; // 256kB stride
+ #redistributor-regions = <2>;
+ reg = <0x2c010000 0x10000>, // GICD
+ <0x2d000000 0x800000>, // GICR 1: CPUs 0-31
+ <0x2e000000 0x800000>, // GICR 2: CPUs 32-63
+ <0x2c040000 0x2000>, // GICC
+ <0x2c060000 0x2000>, // GICH
+ <0x2c080000 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+
+ msi-controller@2c400000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c400000 0x20000>;
+ };
+
+ ppi-partitions {
+ part0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu2>;
+ };
+
+ part1: interrupt-partition-1 {
+ affinity = <&cpu1 &cpu3>;
+ };
+ };
+ };
+
+
+ device@0 {
+ reg = <0 4>;
+ interrupts = <1 1 4 &part0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
deleted file mode 100644
index 2f3244648646..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-* ARM Generic Interrupt Controller
-
-ARM SMP cores are often associated with a GIC, providing per processor
-interrupts (PPI), shared processor interrupts (SPI) and software
-generated interrupts (SGI).
-
-Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
-Secondary GICs are cascaded into the upward interrupt controller and do not
-have PPIs or SGIs.
-
-Main node required properties:
-
-- compatible : should be one of:
- "arm,arm1176jzf-devchip-gic"
- "arm,arm11mp-gic"
- "arm,cortex-a15-gic"
- "arm,cortex-a7-gic"
- "arm,cortex-a9-gic"
- "arm,eb11mp-gic"
- "arm,gic-400"
- "arm,pl390"
- "arm,tc11mp-gic"
- "brcm,brahma-b15-gic"
- "nvidia,tegra210-agic"
- "qcom,msm-8660-qgic"
- "qcom,msm-qgic2"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The type shall be a <u32> and the value shall be 3.
-
- The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
- interrupts.
-
- The 2nd cell contains the interrupt number for the interrupt type.
- SPI interrupts are in the range [0-987]. PPI interrupts are in the
- range [0-15].
-
- The 3rd cell is the flags, encoded as follows:
- bits[3:0] trigger type and level flags.
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered (invalid for SPIs)
- 4 = active high level-sensitive
- 8 = active low level-sensitive (invalid for SPIs).
- bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
- the 8 possible cpus attached to the GIC. A bit set to '1' indicated
- the interrupt is wired to that CPU. Only valid for PPI interrupts.
- Also note that the configurability of PPI interrupts is IMPLEMENTATION
- DEFINED and as such not guaranteed to be present (most SoC available
- in 2014 seem to ignore the setting of this flag and use the hardware
- default value).
-
-- reg : Specifies base physical address(s) and size of the GIC registers. The
- first region is the GIC distributor register base and size. The 2nd region is
- the GIC cpu interface register base and size.
-
-Optional
-- interrupts : Interrupt source of the parent interrupt controller on
- secondary GICs, or VGIC maintenance interrupt on primary GIC (see
- below).
-
-- cpu-offset : per-cpu offset within the distributor and cpu interface
- regions, used when the GIC doesn't have banked registers. The offset is
- cpu-offset * cpu-nr.
-
-- clocks : List of phandle and clock-specific pairs, one for each entry
- in clock-names.
-- clock-names : List of names for the GIC clock input(s). Valid clock names
- depend on the GIC variant:
- "ic_clk" (for "arm,arm11mp-gic")
- "PERIPHCLKEN" (for "arm,cortex-a15-gic")
- "PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic")
- "clk" (for "arm,gic-400" and "nvidia,tegra210")
- "gclk" (for "arm,pl390")
-
-- power-domains : A phandle and PM domain specifier as defined by bindings of
- the power controller specified by phandle, used when the GIC
- is part of a Power or Clock Domain.
-
-
-Example:
-
- intc: interrupt-controller@fff11000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- interrupt-controller;
- reg = <0xfff11000 0x1000>,
- <0xfff10100 0x100>;
- };
-
-
-* GIC virtualization extensions (VGIC)
-
-For ARM cores that support the virtualization extensions, additional
-properties must be described (they only exist if the GIC is the
-primary interrupt controller).
-
-Required properties:
-
-- reg : Additional regions specifying the base physical address and
- size of the VGIC registers. The first additional region is the GIC
- virtual interface control register base and size. The 2nd additional
- region is the GIC virtual cpu interface register base and size.
-
-- interrupts : VGIC maintenance interrupt.
-
-Example:
-
- interrupt-controller@2c001000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x2c001000 0x1000>,
- <0x2c002000 0x2000>,
- <0x2c004000 0x2000>,
- <0x2c006000 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
-
-* GICv2m extension for MSI/MSI-x support (Optional)
-
-Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
-This is enabled by specifying v2m sub-node(s).
-
-Required properties:
-
-- compatible : The value here should contain "arm,gic-v2m-frame".
-
-- msi-controller : Identifies the node as an MSI controller.
-
-- reg : GICv2m MSI interface register base and size
-
-Optional properties:
-
-- arm,msi-base-spi : When the MSI_TYPER register contains an incorrect
- value, this property should contain the SPI base of
- the MSI frame, overriding the HW value.
-
-- arm,msi-num-spis : When the MSI_TYPER register contains an incorrect
- value, this property should contain the number of
- SPIs assigned to the frame, overriding the HW value.
-
-Example:
-
- interrupt-controller@e1101000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-controller;
- interrupts = <1 8 0xf04>;
- ranges = <0 0 0 0xe1100000 0 0x100000>;
- reg = <0x0 0xe1110000 0 0x01000>,
- <0x0 0xe112f000 0 0x02000>,
- <0x0 0xe1140000 0 0x10000>,
- <0x0 0xe1160000 0 0x10000>;
- v2m0: v2m@8000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x0 0x80000 0 0x1000>;
- };
-
- ....
-
- v2mN: v2m@9000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x0 0x90000 0 0x1000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
new file mode 100644
index 000000000000..758fbd7128e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller v1 and v2
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@arm.com>
+
+description: |+
+ ARM SMP cores are often associated with a GIC, providing per processor
+ interrupts (PPI), shared processor interrupts (SPI) and software
+ generated interrupts (SGI).
+
+ Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+ Secondary GICs are cascaded into the upward interrupt controller and do not
+ have PPIs or SGIs.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - arm,arm11mp-gic
+ - arm,cortex-a15-gic
+ - arm,cortex-a7-gic
+ - arm,cortex-a5-gic
+ - arm,cortex-a9-gic
+ - arm,eb11mp-gic
+ - arm,gic-400
+ - arm,pl390
+ - arm,tc11mp-gic
+ - nvidia,tegra210-agic
+ - qcom,msm-8660-qgic
+ - qcom,msm-qgic2
+
+ - items:
+ - const: arm,arm1176jzf-devchip-gic
+ - const: arm,arm11mp-gic
+
+ - items:
+ - const: brcm,brahma-b15-gic
+ - const: arm,cortex-a15-gic
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1 ]
+ "#size-cells":
+ const: 1
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered (invalid for SPIs)
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive (invalid for SPIs).
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+ Also note that the configurability of PPI interrupts is IMPLEMENTATION
+ DEFINED and as such not guaranteed to be present (most SoC available
+ in 2014 seem to ignore the setting of this flag and use the hardware
+ default value).
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region
+ is the GIC cpu interface register base and size.
+
+ For GICv2 with virtualization extensions, additional regions are
+ required for specifying the base physical address and size of the VGIC
+ registers. The first additional region is the GIC virtual interface
+ control register base and size. The 2nd additional region is the GIC
+ virtual cpu interface register base and size.
+ minItems: 2
+ maxItems: 4
+
+ interrupts:
+ description: Interrupt source of the parent interrupt controller on
+ secondary GICs, or VGIC maintenance interrupt on primary GIC (see
+ below).
+ maxItems: 1
+
+ cpu-offset:
+ description: per-cpu offset within the distributor and cpu interface
+ regions, used when the GIC doesn't have banked registers. The offset
+ is cpu-offset * cpu-nr.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ description: List of names for the GIC clock input(s). Valid clock names
+ depend on the GIC variant.
+ oneOf:
+ - const: ic_clk # for "arm,arm11mp-gic"
+ - const: PERIPHCLKEN # for "arm,cortex-a15-gic"
+ - items: # for "arm,cortex-a9-gic"
+ - const: PERIPHCLK
+ - const: PERIPHCLKEN
+ - const: clk # for "arm,gic-400" and "nvidia,tegra210"
+ - const: gclk #for "arm,pl390"
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^v2m@[0-9a-f]+$":
+ description: |
+ * GICv2m extension for MSI/MSI-x support (Optional)
+
+ Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
+ This is enabled by specifying v2m sub-node(s).
+
+ properties:
+ compatible:
+ const: arm,gic-v2m-frame
+
+ msi-controller: true
+
+ reg:
+ maxItems: 1
+ description: GICv2m MSI interface register base and size
+
+ arm,msi-base-spi:
+ description: When the MSI_TYPER register contains an incorrect value,
+ this property should contain the SPI base of the MSI frame, overriding
+ the HW value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ arm,msi-num-spis:
+ description: When the MSI_TYPER register contains an incorrect value,
+ this property should contain the number of SPIs assigned to the
+ frame, overriding the HW value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - compatible
+ - msi-controller
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ // GICv1
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
+ - |
+ // GICv2
+ interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c002000 0x2000>,
+ <0x2c004000 0x2000>,
+ <0x2c006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ - |
+ // GICv2m extension for MSI/MSI-x support
+ interrupt-controller@e1101000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <1 8 0xf04>;
+ ranges = <0 0 0 0xe1100000 0 0x100000>;
+ reg = <0x0 0xe1110000 0 0x01000>,
+ <0x0 0xe112f000 0 0x02000>,
+ <0x0 0xe1140000 0 0x10000>,
+ <0x0 0xe1160000 0 0x10000>;
+
+ v2m0: v2m@8000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x0 0x80000 0 0x1000>;
+ };
+
+ //...
+
+ v2mN: v2m@9000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x0 0x90000 0 0x1000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
index 45790ce6f5b9..582991c426ee 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
@@ -6,8 +6,9 @@ Required properties:
- "fsl,imx8m-irqsteer"
- "fsl,imx-irqsteer"
- reg: Physical base address and size of registers.
-- interrupts: Should contain the parent interrupt line used to multiplex the
- input interrupts.
+- interrupts: Should contain the up to 8 parent interrupt lines used to
+ multiplex the input interrupts. They should be specified sequentially
+ from output 0 to 7.
- clocks: Should contain one clock for entry in clock-names
see Documentation/devicetree/bindings/clock/clock-bindings.txt
- clock-names:
@@ -16,8 +17,8 @@ Required properties:
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- fsl,channel: The output channel that all input IRQs should be steered into.
-- fsl,irq-groups: Number of IRQ groups managed by this controller instance.
- Each group manages 64 input interrupts.
+- fsl,num-irqs: Number of input interrupts of this channel.
+ Should be multiple of 32 input interrupts and up to 512 interrupts.
Example:
@@ -28,7 +29,7 @@ Example:
clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
clock-names = "ipg";
fsl,channel = <0>;
- fsl,irq-groups = <1>;
+ fsl,num-irqs = <64>;
interrupt-controller;
#interrupt-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..a63ed9fcb535
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,24 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "loongson,ls1x-intc". Valid strings are:
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x18>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 33a98eb44949..c5d589108a94 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -9,6 +9,7 @@ Required properties:
"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
+ "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt
deleted file mode 100644
index 099d9362ebc1..000000000000
--- a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-NVIDIA Tegra 20 GART
-
-Required properties:
-- compatible: "nvidia,tegra20-gart"
-- reg: Two pairs of cells specifying the physical address and size of
- the memory controller registers and the GART aperture respectively.
-
-Example:
-
- gart {
- compatible = "nvidia,tegra20-gart";
- reg = <0x7000f024 0x00000018 /* controller registers */
- 0x58000000 0x02000000>; /* GART aperture */
- };
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index aa1399814a2a..70876ac11367 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -37,6 +37,18 @@ Optional properties for child nodes:
"ide-disk" - LED indicates IDE disk activity (deprecated),
in new implementations use "disk-activity"
"timer" - LED flashes at a fixed, configurable rate
+ "pattern" - LED alters the brightness for the specified duration with one
+ software timer (requires "led-pattern" property)
+
+- led-pattern : Array of integers with default pattern for certain triggers.
+ Each trigger may parse this property differently:
+ - one-shot : two numbers specifying delay on and delay off (in ms),
+ - timer : two numbers specifying delay on and delay off (in ms),
+ - pattern : the pattern is given by a series of tuples, of
+ brightness and duration (in ms). The exact format is
+ described in:
+ Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
+
- led-max-microamp : Maximum LED supply current in microamperes. This property
can be made mandatory for the board configurations
diff --git a/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
new file mode 100644
index 000000000000..d3696680bfc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
@@ -0,0 +1,49 @@
+* Pattern format for LED pattern trigger
+
+The pattern is given by a series of tuples, of brightness and duration (ms).
+The LED is expected to traverse the series and each brightness value for the
+specified duration. Duration of 0 means brightness should immediately change to
+new value, and writing malformed pattern deactivates any active one.
+
+1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So
+the tuple with duration less than dimming interval (50ms) is treated as a step
+change of brightness, i.e. the subsequent brightness will be applied without
+adding intervening dimming intervals.
+
+The gradual dimming format of the software pattern values should be:
+"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...".
+For example (using sysfs interface):
+
+echo 0 1000 255 2000 > pattern
+
+It will make the LED go gradually from zero-intensity to max (255) intensity in
+1000 milliseconds, then back to zero intensity in 2000 milliseconds:
+
+LED brightness
+ ^
+255-| / \ / \ /
+ | / \ / \ /
+ | / \ / \ /
+ | / \ / \ /
+ 0-| / \/ \/
+ +---0----1----2----3----4----5----6------------> time (s)
+
+2. To make the LED go instantly from one brightness value to another, we should
+use zero-time lengths (the brightness must be same as the previous tuple's). So
+the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2
+duration_2 brightness_2 0 ...".
+For example (using sysfs interface):
+
+echo 0 1000 0 0 255 2000 255 0 > pattern
+
+It will make the LED stay off for one second, then stay at max brightness for
+two seconds:
+
+LED brightness
+ ^
+255-| +---------+ +---------+
+ | | | | |
+ | | | | |
+ | | | | |
+ 0-| -----+ +----+ +----
+ +---0----1----2----3----4----5----6------------> time (s)
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
new file mode 100644
index 000000000000..4438432bfe9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
@@ -0,0 +1,127 @@
+Xilinx IPI Mailbox Controller
+========================================
+
+The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+agent owns registers used for notification and buffers for message.
+
+ +-------------------------------------+
+ | Xilinx ZynqMP IPI Controller |
+ +-------------------------------------+
+ +--------------------------------------------------+
+ATF | |
+ | |
+ | |
+ +--------------------------+ |
+ | |
+ | |
+ +--------------------------------------------------+
+ +------------------------------------------+
+ | +----------------+ +----------------+ |
+Hardware | | IPI Agent | | IPI Buffers | |
+ | | Registers | | | |
+ | | | | | |
+ | +----------------+ +----------------+ |
+ | |
+ | Xilinx IPI Agent Block |
+ +------------------------------------------+
+
+
+Controller Device Node:
+===========================
+Required properties:
+--------------------
+IPI agent node:
+- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox"
+- interrupt-parent: Phandle for the interrupt controller
+- interrupts: Interrupt information corresponding to the
+ interrupt-names property.
+- xlnx,ipi-id: local Xilinx IPI agent ID
+- #address-cells: number of address cells of internal IPI mailbox nodes
+- #size-cells: number of size cells of internal IPI mailbox nodes
+
+Internal IPI mailbox node:
+- reg: IPI buffers address ranges
+- reg-names: Names of the reg resources. It should have:
+ * local_request_region
+ - IPI request msg buffer written by local and read
+ by remote
+ * local_response_region
+ - IPI response msg buffer written by local and read
+ by remote
+ * remote_request_region
+ - IPI request msg buffer written by remote and read
+ by local
+ * remote_response_region
+ - IPI response msg buffer written by remote and read
+ by local
+- #mbox-cells: Shall be 1. It contains:
+ * tx(0) or rx(1) channel
+- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is
+ connected to.
+
+Optional properties:
+--------------------
+- method: The method of accessing the IPI agent registers.
+ Permitted values are: "smc" and "hvc". Default is
+ "smc".
+
+Client Device Node:
+===========================
+Required properties:
+--------------------
+- mboxes: Standard property to specify a mailbox
+ (See ./mailbox.txt)
+- mbox-names: List of identifier strings for each mailbox
+ channel.
+
+Example:
+===========================
+ zynqmp_ipi {
+ compatible = "xlnx,zynqmp-ipi-mailbox";
+ interrupt-parent = <&gic>;
+ interrupts = <0 29 4>;
+ xlnx,ipi-id = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* APU<->RPU0 IPI mailbox controller */
+ ipi_mailbox_rpu0: mailbox@ff90400 {
+ reg = <0xff990400 0x20>,
+ <0xff990420 0x20>,
+ <0xff990080 0x20>,
+ <0xff9900a0 0x20>;
+ reg-names = "local_request_region",
+ "local_response_region",
+ "remote_request_region",
+ "remote_response_region";
+ #mbox-cells = <1>;
+ xlnx,ipi-id = <1>;
+ };
+ /* APU<->RPU1 IPI mailbox controller */
+ ipi_mailbox_rpu1: mailbox@ff990440 {
+ reg = <0xff990440 0x20>,
+ <0xff990460 0x20>,
+ <0xff990280 0x20>,
+ <0xff9902a0 0x20>;
+ reg-names = "local_request_region",
+ "local_response_region",
+ "remote_request_region",
+ "remote_response_region";
+ #mbox-cells = <1>;
+ xlnx,ipi-id = <2>;
+ };
+ };
+ rpu0 {
+ ...
+ mboxes = <&ipi_mailbox_rpu0 0>,
+ <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+ rpu1 {
+ ...
+ mboxes = <&ipi_mailbox_rpu1 0>,
+ <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 5dddc95f9cc4..4f91686e54a6 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -48,7 +48,16 @@ are numbered as follows.
TXA source 10
TXB source 11
-The digital output port nodes must contain at least one endpoint.
+The digital output port nodes, when present, shall contain at least one
+endpoint. Each of those endpoints shall contain the data-lanes property as
+described in video-interfaces.txt.
+
+Required source endpoint properties:
+ - data-lanes: an array of physical data lane indexes
+ The accepted value(s) for this property depends on which of the two
+ sources are described. For TXA 1, 2 or 4 data lanes can be described
+ while for TXB only 1 data lane is valid. See video-interfaces.txt
+ for detailed description.
Ports are optional if they are not connected to anything at the hardware level.
diff --git a/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
new file mode 100644
index 000000000000..060d2b7a5893
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
@@ -0,0 +1,20 @@
+* Melexis MLX90640 FIR Sensor
+
+Melexis MLX90640 FIR sensor support which allows recording of thermal data
+with 32x24 resolution excluding 2 lines of coefficient data that is used by
+userspace to render processed frames.
+
+Required Properties:
+ - compatible : Must be "melexis,mlx90640"
+ - reg : i2c address of the device
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ mlx90640@33 {
+ compatible = "melexis,mlx90640";
+ reg = <0x33>;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
new file mode 100644
index 000000000000..c920552b03ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
@@ -0,0 +1,38 @@
+MT9M001: 1/2-Inch Megapixel Digital Image Sensor
+
+The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
+image sensor. It is programmable through I2C interface.
+
+Required Properties:
+
+- compatible: shall be "onnn,mt9m001".
+- clocks: reference to the master clock into sensor
+
+Optional Properties:
+
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+ Active low.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
+ Active high.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ &i2c1 {
+ camera-sensor@5d {
+ compatible = "onnn,mt9m001";
+ reg = <0x5d>;
+ reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ clocks = <&camera_clk>;
+ port {
+ mt9m001_out: endpoint {
+ remote-endpoint = <&vcap_in>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index fd7aec9f8e24..72ad992f77be 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
@@ -26,9 +26,9 @@ Example:
&i2c1 {
...
- ov5645: ov5645@78 {
+ ov5645: ov5645@3c {
compatible = "ovti,ov5645";
- reg = <0x78>;
+ reg = <0x3c>;
enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
@@ -37,7 +37,7 @@ Example:
clocks = <&clks 200>;
clock-names = "xclk";
- clock-frequency = <23880000>;
+ clock-frequency = <24000000>;
vdddo-supply = <&camera_dovdd_1v8>;
vdda-supply = <&camera_avdd_2v8>;
diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
new file mode 100644
index 000000000000..3c07bc676bc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx7-csi.txt
@@ -0,0 +1,45 @@
+Freescale i.MX7 CMOS Sensor Interface
+=====================================
+
+csi node
+--------
+
+This is device node for the CMOS Sensor Interface (CSI) which enables the chip
+to connect directly to external CMOS image sensors.
+
+Required properties:
+
+- compatible : "fsl,imx7-csi";
+- reg : base address and length of the register set for the device;
+- interrupts : should contain CSI interrupt;
+- clocks : list of clock specifiers, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
+- clock-names : must contain "axi", "mclk" and "dcic" entries, matching
+ entries in the clock property;
+
+The device node shall contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+In the following example a remote endpoint is a video multiplexer.
+
+example:
+
+ csi: csi@30710000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "fsl,imx7-csi";
+ reg = <0x30710000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "axi", "mclk", "dcic";
+
+ port {
+ csi_from_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_to_csi>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
new file mode 100644
index 000000000000..71fd74ed3ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
@@ -0,0 +1,90 @@
+Freescale i.MX7 Mipi CSI2
+=========================
+
+mipi_csi2 node
+--------------
+
+This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
+compatible with previous version of Samsung D-phy.
+
+Required properties:
+
+- compatible : "fsl,imx7-mipi-csi2";
+- reg : base address and length of the register set for the device;
+- interrupts : should contain MIPI CSIS interrupt;
+- clocks : list of clock specifiers, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
+- clock-names : must contain "pclk", "wrap" and "phy" entries, matching
+ entries in the clock property;
+- power-domains : a phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- reset-names : should include following entry "mrst";
+- resets : a list of phandle, should contain reset entry of
+ reset-names;
+- phy-supply : from the generic phy bindings, a phandle to a regulator that
+ provides power to MIPI CSIS core;
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+ value when this property is not specified is 166 MHz;
+- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
+
+The device node should contain two 'port' child nodes with one child 'endpoint'
+node, according to the bindings defined in:
+ Documentation/devicetree/bindings/ media/video-interfaces.txt.
+ The following are properties specific to those nodes.
+
+port node
+---------
+
+- reg : (required) can take the values 0 or 1, where 0 shall be
+ related to the sink port and port 1 shall be the source
+ one;
+
+endpoint node
+-------------
+
+- data-lanes : (required) an array specifying active physical MIPI-CSI2
+ data input lanes and their mapping to logical lanes; this
+ shall only be applied to port 0 (sink port), the array's
+ content is unused only its length is meaningful,
+ in this case the maximum length supported is 2;
+
+example:
+
+ mipi_csi: mipi-csi@30750000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "fsl,imx7-mipi-csi2";
+ reg = <0x30750000 0x10000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "pclk", "wrap", "phy";
+ clock-frequency = <166000000>;
+ power-domains = <&pgc_mipi_phy>;
+ phy-supply = <&reg_1p0d>;
+ resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+ reset-names = "mrst";
+ fsl,csis-hs-settle = <3>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_from_sensor: endpoint {
+ remote-endpoint = <&ov2680_to_mipi>;
+ data-lanes = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_from_mipi_vc0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 2a615d84a682..b6b5dde6abd8 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -66,6 +66,15 @@ vcodec_dec: vcodec@16000000 {
"vencpll",
"venc_lt_sel",
"vdec_bus_clk_src";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+ <&topckgen CLK_TOP_CCI400_SEL>,
+ <&topckgen CLK_TOP_VDEC_SEL>,
+ <&apmixedsys CLK_APMIXED_VCODECPLL>,
+ <&apmixedsys CLK_APMIXED_VENCPLL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+ <&topckgen CLK_TOP_UNIVPLL_D2>,
+ <&topckgen CLK_TOP_VCODECPLL>;
+ assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
};
vcodec_enc: vcodec@18002000 {
@@ -105,4 +114,8 @@ vcodec_dec: vcodec@16000000 {
"venc_sel",
"venc_lt_sel_src",
"venc_lt_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
+ <&topckgen CLK_TOP_UNIVPLL1_D2>;
};
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 0dd84a183ca7..224a4615b418 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -7,12 +7,13 @@ family of devices.
Each VIN instance has a single parallel input that supports RGB and YUV video,
with both external synchronization and BT.656 synchronization for the latter.
Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 platforms to a CSI-2 receiver.
+on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
- compatible: Must be one or more of the following
- "renesas,vin-r8a7743" for the R8A7743 device
- "renesas,vin-r8a7744" for the R8A7744 device
- "renesas,vin-r8a7745" for the R8A7745 device
+ - "renesas,vin-r8a774c0" for the R8A774C0 device
- "renesas,vin-r8a7778" for the R8A7778 device
- "renesas,vin-r8a7779" for the R8A7779 device
- "renesas,vin-r8a7790" for the R8A7790 device
@@ -61,10 +62,10 @@ The per-board settings Gen2 platforms:
- data-enable-active: polarity of CLKENB signal, see [1] for
description. Default is active high.
-The per-board settings Gen3 platforms:
+The per-board settings Gen3 and RZ/G2 platforms:
-Gen3 platforms can support both a single connected parallel input source
-from external SoC pins (port@0) and/or multiple parallel input sources
+Gen3 and RZ/G2 platforms can support both a single connected parallel input
+source from external SoC pins (port@0) and/or multiple parallel input sources
from local SoC CSI-2 receivers (port@1) depending on SoC.
- renesas,id - ID number of the VIN, VINx in the documentation.
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt
index 3ec91803ba58..79c37395b396 100644
--- a/Documentation/devicetree/bindings/media/renesas,fcp.txt
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.txt
@@ -2,8 +2,9 @@ Renesas R-Car Frame Compression Processor (FCP)
-----------------------------------------------
The FCP is a companion module of video processing modules in the Renesas R-Car
-Gen3 SoCs. It provides data compression and decompression, data caching, and
-conversion of AXI transactions in order to reduce the memory bandwidth.
+Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data
+caching, and conversion of AXI transactions in order to reduce the memory
+bandwidth.
There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP
for FDP (FCPF). Their configuration and behaviour depend on the module they
diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
index 541d936b62e8..d63275e17afd 100644
--- a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
+++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
@@ -2,12 +2,13 @@ Renesas R-Car MIPI CSI-2
------------------------
The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
-Renesas R-Car family of devices. It is used in conjunction with the
+Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the
R-Car VIN module, which provides the video capture capabilities.
Mandatory properties
--------------------
- compatible: Must be one or more of the following
+ - "renesas,r8a774c0-csi2" for the R8A774C0 device.
- "renesas,r8a7795-csi2" for the R8A7795 device.
- "renesas,r8a7796-csi2" for the R8A7796 device.
- "renesas,r8a77965-csi2" for the R8A77965 device.
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
index 16427017cb45..cd5a955b2ea0 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
@@ -2,13 +2,13 @@
The VSP is a video processing engine that supports up-/down-scaling, alpha
blending, color space conversion and various other image processing features.
-It can be found in the Renesas R-Car second generation SoCs.
+It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs.
Required properties:
- compatible: Must contain one of the following values
- - "renesas,vsp1" for the R-Car Gen2 VSP1
- - "renesas,vsp2" for the R-Car Gen3 VSP2
+ - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1
+ - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2
- reg: Base address and length of the registers block for the VSP.
- interrupts: VSP interrupt specifier.
diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt
new file mode 100644
index 000000000000..a9403558362e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/si470x.txt
@@ -0,0 +1,26 @@
+* Silicon Labs FM Radio receiver
+
+The Silicon Labs Si470x is family of FM radio receivers with receive power scan
+supporting 76-108 MHz, programmable through an I2C interface.
+Some of them includes an RDS encoder.
+
+Required Properties:
+- compatible: Should contain "silabs,si470x"
+- reg: the I2C address of the device
+
+Optional Properties:
+- interrupts : The interrupt number
+- reset-gpios: GPIO specifier for the chips reset line
+
+Example:
+
+&i2c2 {
+ si470x@63 {
+ compatible = "silabs,si470x";
+ reg = <0x63>;
+
+ interrupt-parent = <&gpj2>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
index d4ab34f2240c..0dd540bb03db 100644
--- a/Documentation/devicetree/bindings/media/sun6i-csi.txt
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -6,8 +6,9 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
Required properties:
- compatible: value must be one of:
* "allwinner,sun6i-a31-csi"
- * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi"
+ * "allwinner,sun8i-h3-csi"
* "allwinner,sun8i-v3s-csi"
+ * "allwinner,sun50i-a64-csi"
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the CSI
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
index 7d60a50a4fa1..e55328237df4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
@@ -1,26 +1,37 @@
NVIDIA Tegra20 MC(Memory Controller)
Required properties:
-- compatible : "nvidia,tegra20-mc"
-- reg : Should contain 2 register ranges(address and length); see the
- example below. Note that the MC registers are interleaved with the
- GART registers, and hence must be represented as multiple ranges.
+- compatible : "nvidia,tegra20-mc-gart"
+- reg : Should contain 2 register ranges: physical base address and length of
+ the controller's registers and the GART aperture respectively.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - mc: the module's clock input
- interrupts : Should contain MC General interrupt.
- #reset-cells : Should be 1. This cell represents memory client module ID.
The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h>
or in the TRM documentation.
+- #iommu-cells: Should be 0. This cell represents the number of cells in an
+ IOMMU specifier needed to encode an address. GART supports only a single
+ address space that is shared by all devices, therefore no additional
+ information needed for the address encoding.
Example:
mc: memory-controller@7000f000 {
- compatible = "nvidia,tegra20-mc";
- reg = <0x7000f000 0x024
- 0x7000f03c 0x3c4>;
- interrupts = <0 77 0x04>;
+ compatible = "nvidia,tegra20-mc-gart";
+ reg = <0x7000f000 0x400 /* controller registers */
+ 0x58000000 0x02000000>; /* GART aperture */
+ clocks = <&tegra_car TEGRA20_CLK_MC>;
+ clock-names = "mc";
+ interrupts = <GIC_SPI 77 0x04>;
#reset-cells = <1>;
+ #iommu-cells = <0>;
};
video-codec@6001a000 {
compatible = "nvidia,tegra20-vde";
...
resets = <&mc TEGRA20_MC_RESET_VDE>;
+ iommus = <&mc>;
};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index 34dd89087cff..86446074e206 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -135,6 +135,8 @@ Required properties:
- clocks: contains a phandle to the syscon node describing the clocks.
There should then be one cell representing the clock to use
+Optional properties:
+
- memory-region: A phandle to a reserved_memory region to be used for the LPC
to AHB mapping
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
new file mode 100644
index 000000000000..004b0158cf4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
@@ -0,0 +1,68 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform. Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+
+And these for relevant defines:
+ [2] include/dt-bindings/pinctrl/lochnagar.h
+ [3] include/dt-bindings/clock/lochnagar.h
+
+And these documents for the required sub-node binding details:
+ [4] Clock: ../clock/cirrus,lochnagar.txt
+ [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
+ [6] Regulator: ../regulator/cirrus,lochnagar.txt
+
+Required properties:
+
+ - compatible : One of the following strings:
+ "cirrus,lochnagar1"
+ "cirrus,lochnagar2"
+
+ - reg : I2C slave address
+
+ - reset-gpios : Reset line to the Lochnagar, see [1].
+
+Required sub-nodes:
+
+ - lochnagar-clk : Binding for the clocking components, see [4].
+
+ - lochnagar-pinctrl : Binding for the pin control components, see [5].
+
+Optional sub-nodes:
+
+ - Bindings for the regulator components, see [6]. Only available on
+ Lochnagar 2.
+
+Optional properties:
+
+ - present-gpios : Host present line, indicating the presence of a
+ host system, see [1]. This can be omitted if the present line is
+ tied in hardware.
+
+Example:
+
+lochnagar: lochnagar@22 {
+ compatible = "cirrus,lochnagar2";
+ reg = <0x22>;
+
+ reset-gpios = <&gpio0 55 0>;
+ present-gpios = <&gpio0 60 0>;
+
+ lochnagar-clk {
+ compatible = "cirrus,lochnagar2-clk";
+ ...
+ };
+
+ lochnagar-pinctrl {
+ compatible = "cirrus,lochnagar-pinctrl";
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
index a4b056761eaa..d5f68ac78d15 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -23,6 +23,20 @@ Required properties:
Optional properties:
- clock-output-names : Should contain name for output clock.
+- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset.
+
+The BD718x7 supports two different HW states as reset target states. States
+are called as SNVS and READY. At READY state all the PMIC power outputs go
+down and OTP is reload. At the SNVS state all other logic and external
+devices apart from the SNVS power domain are shut off. Please refer to NXP
+i.MX8 documentation for further information regarding SNVS state. When a
+reset is done via SNVS state the PMIC OTP data is not reload. This causes
+power outputs that have been under SW control to stay down when reset has
+switched power state to SNVS. If reset is done via READY state the power
+outputs will be returned to HW control by OTP loading. Thus the reset
+target state is set to READY by default. If SNVS state is used the boot
+crucial regulators must have the regulator-always-on and regulator-boot-on
+properties set in regulator node.
Example:
@@ -43,6 +57,7 @@ Example:
#clock-cells = <0>;
clocks = <&osc 0>;
clock-output-names = "bd71837-32k-out";
+ rohm,reset-snvs-powered;
regulators {
buck1: BUCK1 {
@@ -50,8 +65,10 @@ Example:
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <1250>;
};
+ // [...]
};
};
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
new file mode 100644
index 000000000000..afd45c089585
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
@@ -0,0 +1,61 @@
+* STMicroelectronics STPMIC1 Power Management IC
+
+Required properties:
+- compatible: : "st,stpmic1"
+- reg: : The I2C slave address for the STPMIC1 chip.
+- interrupts: : The interrupt line the device is connected to.
+- #interrupt-cells: : Should be 1.
+- interrupt-controller: : Marks the device node as an interrupt controller.
+ Interrupt numbers are defined at
+ dt-bindings/mfd/st,stpmic1.h.
+
+STPMIC1 consists in a varied group of sub-devices.
+Each sub-device binding is be described in own documentation file.
+
+Device Description
+------ ------------
+st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt
+st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt
+st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt
+
+Example:
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+pmic: pmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupt-parent = <&gpioa>;
+ interrupts = <0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ };
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ vdd_core: buck1 {
+ regulator-name = "vdd_core";
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index c797c05cd3c2..d4408a417193 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio,
keypad, touchscreen, adc, pwm, rotator.
Required properties:
- - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]"
- - reg : I2C/SPI address of the device
+ - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]"
+ - reg : I2C/SPI address of the device
Optional properties:
- - interrupts : The interrupt outputs from the controller
- - interrupt-controller : Marks the device node as an interrupt controller
- - wakeup-source : Marks the input device as wakable
- - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
- - irq-gpio : If present, which GPIO to use for event IRQ
+ - interrupts : The interrupt outputs from the controller
+ - interrupt-controller : Marks the device node as an interrupt controller
+ - wakeup-source : Marks the input device as wakable
+ - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio : If present, which GPIO to use for event IRQ
+
+Optional properties for devices with touch and ADC (STMPE811|STMPE610):
+ - st,sample-time : ADC conversion time in number of clock.
+ 0 -> 36 clocks 4 -> 80 clocks (recommended)
+ 1 -> 44 clocks 5 -> 96 clocks
+ 2 -> 56 clocks 6 -> 124 clocks
+ 3 -> 64 clocks
+ - st,mod-12b : ADC Bit mode
+ 0 -> 10bit ADC 1 -> 12bit ADC
+ - st,ref-sel : ADC reference source
+ 0 -> internal 1 -> external
+ - st,adc-freq : ADC Clock speed
+ 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz
+ 1 -> 3.25 MHz
Example:
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
deleted file mode 100644
index a0c19bd1ce66..000000000000
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Lantiq XWAY SoC GPHY binding
-============================
-
-This binding describes a software-defined ethernet PHY, provided by the RCU
-module on newer Lantiq XWAY SoCs (xRX200 and newer).
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible : Should be one of
- "lantiq,xrx200a1x-gphy"
- "lantiq,xrx200a2x-gphy"
- "lantiq,xrx300-gphy"
- "lantiq,xrx330-gphy"
-- reg : Addrress of the GPHY FW load address register
-- resets : Must reference the RCU GPHY reset bit
-- reset-names : One entry, value must be "gphy" or optional "gphy2"
-- clocks : A reference to the (PMU) GPHY clock gate
-
-Optional properties:
-- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
- <dt-bindings/mips/lantiq_xway_gphy.h>
-
-
--------------------------------------------------------------------------------
-Example for the GPHys on the xRX200 SoCs:
-
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
- gphy0: gphy@20 {
- compatible = "lantiq,xrx200a2x-gphy";
- reg = <0x20 0x4>;
-
- resets = <&reset0 31 30>, <&reset1 7 7>;
- reset-names = "gphy", "gphy2";
- clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
- lantiq,gphy-mode = <GPHY_MODE_GE>;
- };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index 7f0822b4beae..58d51f480c9e 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -26,24 +26,6 @@ Example of the RCU bindings on a xRX200 SoC:
ranges = <0x0 0x203000 0x100>;
big-endian;
- gphy0: gphy@20 {
- compatible = "lantiq,xrx200a2x-gphy";
- reg = <0x20 0x4>;
-
- resets = <&reset0 31 30>, <&reset1 7 7>;
- reset-names = "gphy", "gphy2";
- lantiq,gphy-mode = <GPHY_MODE_GE>;
- };
-
- gphy1: gphy@68 {
- compatible = "lantiq,xrx200a2x-gphy";
- reg = <0x68 0x4>;
-
- resets = <&reset0 29 28>, <&reset1 6 6>;
- reset-names = "gphy", "gphy2";
- lantiq,gphy-mode = <GPHY_MODE_GE>;
- };
-
reset0: reset-controller@10 {
compatible = "lantiq,xrx200-reset";
reg = <0x10 4>, <0x14 4>;
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
new file mode 100644
index 000000000000..2a1827ab50d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
@@ -0,0 +1,78 @@
+Qualcomm Technologies, Inc. FastRPC Driver
+
+The FastRPC implements an IPC (Inter-Processor Communication)
+mechanism that allows for clients to transparently make remote method
+invocations across DSP and APPS boundaries. This enables developers
+to offload tasks to the DSP and free up the application processor for
+other tasks.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,fastrpc"
+
+- label
+ Usage: required
+ Value type: <string>
+ Definition: should specify the dsp domain name this fastrpc
+ corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
+
+- #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+- #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 0
+
+= COMPUTE BANKS
+Each subnode of the Fastrpc represents compute context banks available
+on the dsp.
+- All Compute context banks MUST contain the following properties:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,fastrpc-compute-cb"
+
+- reg
+ Usage: required
+ Value type: <u32>
+ Definition: Context Bank ID.
+
+- qcom,nsessions:
+ Usage: Optional
+ Value type: <u32>
+ Defination: A value indicating how many sessions can share this
+ context bank. Defaults to 1 when this property
+ is not specified.
+
+Example:
+
+adsp-pil {
+ compatible = "qcom,msm8996-adsp-pil";
+ ...
+ smd-edge {
+ label = "lpass";
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,smd-channels = "fastrpcsmd-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ };
+
+ cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ };
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 9201a7d8d7b0..540c65ed9cba 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -15,6 +15,7 @@ Required properties:
"fsl,imx6q-usdhc"
"fsl,imx6sl-usdhc"
"fsl,imx6sx-usdhc"
+ "fsl,imx6ull-usdhc"
"fsl,imx7d-usdhc"
"fsl,imx8qxp-usdhc"
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index f5a0923b34ca..cdbcfd3a4ff2 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -62,6 +62,8 @@ Optional properties:
be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay
waiting for I/O signalling and card power supply to be stable, regardless of
whether pwrseq-simple is used. Default to 10ms if no available.
+- supports-cqe : The presence of this property indicates that the corresponding
+ MMC host controller supports HW command queue feature.
*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 32b4b4e41923..2cecdc71d94c 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -39,12 +39,16 @@ sdhci@c8000200 {
bus-width = <8>;
};
-Optional properties for Tegra210 and Tegra186:
+Optional properties for Tegra210, Tegra186 and Tegra194:
- pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
for controllers supporting multiple voltage levels. The order of names
should correspond to the pin configuration states in pinctrl-0 and
pinctrl-1.
+- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
+ Tegra210 where pad config registers are in the pinmux register domain
+ for pull-up-strength and pull-down-strength values configuration when
+ using pads at 3V3 and 1V8 levels.
- nvidia,only-1-8-v : The presence of this property indicates that the
controller operates at a 1.8 V fixed I/O voltage.
- nvidia,pad-autocal-pull-up-offset-3v3,
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
index 8de579969763..02fd31cf361d 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -24,31 +24,3 @@ Examples:
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};
-
-* TI MMC host controller for OMAP1 and 2420
-
-The MMC Host Controller on TI OMAP1 and 2420 family provides
-an interface for MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the omap mmc driver.
-
-Note that this driver will not work with omap2430 or later omaps,
-please see the omap hsmmc driver for the current omaps.
-
-Required properties:
-- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
-- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
- instance starting 1
-
-Examples:
-
- msdi1: mmc@4809c000 {
- compatible = "ti,omap2420-mmc";
- ti,hwmods = "msdi1";
- reg = <0x4809c000 0x80>;
- interrupts = <83>;
- dmas = <&sdma 61 &sdma 62>;
- dma-names = "tx", "rx";
- };
-
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
new file mode 100644
index 000000000000..3983c11e062c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
@@ -0,0 +1,60 @@
+Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+This file documents the properties in addition to those available in
+the MTD NAND bindings.
+
+Required properties:
+- compatible : contains one of:
+ - "amlogic,meson-gxl-nfc"
+ - "amlogic,meson-axg-nfc"
+- clocks :
+ A list of phandle + clock-specifier pairs for the clocks listed
+ in clock-names.
+
+- clock-names: Should contain the following:
+ "core" - NFC module gate clock
+ "device" - device clock from eMMC sub clock controller
+ "rx" - rx clock phase
+ "tx" - tx clock phase
+
+- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC
+ controller port C
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Other properties:
+see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+
+Example demonstrate on AXG SoC:
+
+ sd_emmc_c_clkc: mmc@7000 {
+ compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
+ reg = <0x0 0x7000 0x0 0x800>;
+ };
+
+ nand-controller@7800 {
+ compatible = "amlogic,meson-axg-nfc";
+ reg = <0x0 0x7800 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&sd_emmc_c_clkc CLKID_MMC_DIV>,
+ <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
+ <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
+ clock-names = "core", "device", "rx", "tx";
+ amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-on-flash-bbt;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index bb2075df9b38..4345c3a6f530 100644
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible : should be one of the following:
Generic default - "cdns,qspi-nor".
For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
+ For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor".
- reg : Contains two entries, each of which is a tuple consisting of a
physical address and length. The first entry is the address and
length of the controller register set. The second entry is the
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index 56d3668e2c50..a12e3b5c495d 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -1,4 +1,4 @@
-* Serial NOR flash controller for MTK MT81xx (and similar)
+* Serial NOR flash controller for MediaTek SoCs
Required properties:
- compatible: For mt8173, compatible should be "mediatek,mt8173-nor",
@@ -10,6 +10,7 @@ Required properties:
"mediatek,mt2712-nor", "mediatek,mt8173-nor"
"mediatek,mt7622-nor", "mediatek,mt8173-nor"
"mediatek,mt7623-nor", "mediatek,mt8173-nor"
+ "mediatek,mt7629-nor", "mediatek,mt8173-nor"
"mediatek,mt8173-nor"
- reg: physical base address and length of the controller's register
- clocks: the phandle of the clocks needed by the nor controller
diff --git a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
new file mode 100644
index 000000000000..ad2bef826582
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
@@ -0,0 +1,61 @@
+STMicroelectronics Flexible Memory Controller 2 (FMC2)
+NAND Interface
+
+Required properties:
+- compatible: Should be one of:
+ * st,stm32mp15-fmc2
+- reg: NAND flash controller memory areas.
+ First region contains the register location.
+ Regions 2 to 4 respectively contain the data, command,
+ and address space for CS0.
+ Regions 5 to 7 contain the same areas for CS1.
+- interrupts: The interrupt number
+- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+- clocks: The clock needed by the NAND flash controller
+
+Optional properties:
+- resets: Reference to a reset controller asserting the FMC controller
+- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
+- dma-names: Must be "tx", "rx" and "ecc"
+
+* NAND device bindings:
+
+Required properties:
+- reg: describes the CS lines assigned to the NAND device.
+
+Optional properties:
+- nand-on-flash-bbt: see nand.txt
+- nand-ecc-strength: see nand.txt
+- nand-ecc-step-size: see nand.txt
+
+The following ECC strength and step size are currently supported:
+ - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
+ - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
+ - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
+
+Example:
+
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fmc_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 37d67926dd6d..b1ad6ee68e90 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -9,6 +9,9 @@ Required properties:
(more may be added later) are:
"usb1286,204e" (Marvell 8997)
+ "usbcf3,e300" (Qualcomm QCA6174A)
+ "usb4ca,301a" (Qualcomm QCA6174A (Lite-On))
+
Also, vendors that use btusb may have device additional properties, e.g:
Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
index 764c0c79b43d..5d76f991c027 100644
--- a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
+++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
@@ -1,4 +1,4 @@
-TI CPSW Phy mode Selection Device Tree Bindings
+TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED)
-----------------------------------------------
Required properties:
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index 35694c0c376b..d66a5292b9d3 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -71,6 +71,10 @@ properties, described in binding documents:
Documentation/devicetree/bindings/net/fixed-link.txt
for details.
+- local-mac-address : See
+ Documentation/devicetree/bindings/net/ethernet.txt
+ for details.
+
Example
The following example shows three switches on three MDIO busses,
@@ -97,6 +101,7 @@ linked into one DSA cluster.
port@1 {
reg = <1>;
label = "lan1";
+ local-mac-address = [00 00 00 00 00 00];
};
port@2 {
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index 0f407fb371ce..e7db7268fd0f 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -7,6 +7,11 @@ Required properties:
of the following:
- "microchip,ksz9477"
- "microchip,ksz9897"
+ - "microchip,ksz9896"
+ - "microchip,ksz9567"
+ - "microchip,ksz8565"
+ - "microchip,ksz9893"
+ - "microchip,ksz9563"
Optional properties:
@@ -19,58 +24,96 @@ Examples:
Ethernet switch connected via SPI to the host, CPU port wired to eth0:
- eth0: ethernet@10001000 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
+ eth0: ethernet@10001000 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
- spi1: spi@f8008000 {
- pinctrl-0 = <&pinctrl_spi_ksz>;
- cs-gpios = <&pioC 25 0>;
- id = <1>;
+ spi1: spi@f8008000 {
+ pinctrl-0 = <&pinctrl_spi_ksz>;
+ cs-gpios = <&pioC 25 0>;
+ id = <1>;
- ksz9477: ksz9477@0 {
- compatible = "microchip,ksz9477";
- reg = <0>;
+ ksz9477: ksz9477@0 {
+ compatible = "microchip,ksz9477";
+ reg = <0>;
- spi-max-frequency = <44000000>;
- spi-cpha;
- spi-cpol;
+ spi-max-frequency = <44000000>;
+ spi-cpha;
+ spi-cpol;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan1";
- };
- port@1 {
- reg = <1>;
- label = "lan2";
- };
- port@2 {
- reg = <2>;
- label = "lan3";
- };
- port@3 {
- reg = <3>;
- label = "lan4";
- };
- port@4 {
- reg = <4>;
- label = "lan5";
- };
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <&eth0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ ksz8565: ksz8565@0 {
+ compatible = "microchip,ksz8565";
+ reg = <0>;
+
+ spi-max-frequency = <44000000>;
+ spi-cpha;
+ spi-cpol;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index aa3527f71fdc..47aa205ee0bd 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch
Required properties:
-- compatible: Must be compatible = "mediatek,mt7530";
+- compatible: may be compatible = "mediatek,mt7530"
+ or compatible = "mediatek,mt7621"
- #address-cells: Must be 1.
- #size-cells: Must be 0.
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
on multi-chip module belong to MT7623A has or the remotely standalone
chip as the function MT7623N reference board provided for.
+
+If compatible mediatek,mt7530 is set then the following properties are required
+
- core-supply: Phandle to the regulator node necessary for the core power.
- io-supply: Phandle to the regulator node necessary for the I/O power.
See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
new file mode 100644
index 000000000000..c812e25ae90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -0,0 +1,69 @@
+* ENETC ethernet device tree bindings
+
+Depending on board design and ENETC port type (internal or
+external) there are two supported link modes specified by
+below device tree bindings.
+
+Required properties:
+
+- reg : Specifies PCIe Device Number and Function
+ Number of the ENETC endpoint device, according
+ to parent node bindings.
+- compatible : Should be "fsl,enetc".
+
+1) The ENETC external port is connected to a MDIO configurable phy:
+
+In this case, the ENETC node should include a "mdio" sub-node
+that in turn should contain the "ethernet-phy" node describing the
+external phy. Below properties are required, their bindings
+already defined in ethernet.txt or phy.txt, under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- phy-handle : Phandle to a PHY on the MDIO bus.
+ Defined in ethernet.txt.
+
+- phy-connection-type : Defined in ethernet.txt.
+
+- mdio : "mdio" node, defined in mdio.txt.
+
+- ethernet-phy : "ethernet-phy" node, defined in phy.txt.
+
+Example:
+
+ ethernet@0,0 {
+ compatible = "fsl,enetc";
+ reg = <0x000000 0 0 0 0>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy0: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+ };
+
+2) The ENETC port is an internal port or has a fixed-link external
+connection:
+
+In this case, the ENETC port node defines a fixed link connection,
+as specified by "fixed-link.txt", under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- fixed-link : "fixed-link" node, defined in "fixed-link.txt".
+
+Example:
+ ethernet@0,2 {
+ compatible = "fsl,enetc";
+ reg = <0x000200 0 0 0 0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 3e17ac1d5d58..174f292d8a3e 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -3,8 +3,8 @@
Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
- Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
- available on sama5d3 SoCs.
+ Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
+ Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index bedcfd5a52cd..691f886cfc4a 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -19,7 +19,7 @@ Optional properties:
"marvell,armada-370-neta" and 9800B for others.
- clock-names: List of names corresponding to clocks property; shall be
"core" for core clock and "bus" for the optional bus clock.
-
+- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt
Optional properties (valid only for Armada XP/38x):
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt
new file mode 100644
index 000000000000..534e38058fe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.txt
@@ -0,0 +1,82 @@
+Properties for an MDIO bus multiplexer consumer device
+
+This is a special case of MDIO mux when MDIO mux is defined as a consumer
+of a mux producer device. The mux producer can be of any type like mmio mux
+producer, gpio mux producer or generic register based mux producer.
+
+Required properties in addition to the MDIO Bus multiplexer properties:
+
+- compatible : should be "mmio-mux-multiplexer"
+- mux-controls : mux controller node to use for operating the mux
+- mdio-parent-bus : phandle to the parent MDIO bus.
+
+each child node of mdio bus multiplexer consumer device represent a mdio
+bus.
+
+for more information please refer
+Documentation/devicetree/bindings/mux/mux-controller.txt
+and Documentation/devicetree/bindings/net/mdio-mux.txt
+
+Example:
+In below example the Mux producer and consumer are separate nodes.
+
+&i2c0 {
+ fpga@66 { // fpga connected to i2c
+ compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+ "simple-mfd";
+ reg = <0x66>;
+
+ mux: mux-controller { // Mux Producer
+ compatible = "reg-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+ <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+ };
+ };
+};
+
+mdio-mux-1 { // Mux consumer
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux 0>;
+ mdio-parent-bus = <&emdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@8 {
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ..
+ ..
+};
+
+mdio-mux-2 { // Mux consumer
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux 1>;
+ mdio-parent-bus = <&emdio2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ..
+ ..
+};
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 14ceb2a5b4e8..41a7dcc80f5b 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -33,3 +33,67 @@ Example:
clock-names = "ref";
};
};
+
+MediaTek UART based Bluetooth Devices
+==================================
+
+This device is a serial attached device to UART device and thus it must be a
+child node of the serial node with UART.
+
+Please refer to the following documents for generic properties:
+
+ Documentation/devicetree/bindings/serial/slave-device.txt
+
+Required properties:
+
+- compatible: Must be
+ "mediatek,mt7663u-bluetooth": for MT7663U device
+ "mediatek,mt7668u-bluetooth": for MT7668U device
+- vcc-supply: Main voltage regulator
+- pinctrl-names: Should be "default", "runtime"
+- pinctrl-0: Should contain UART RXD low when the device is powered up to
+ enter proper bootstrap mode.
+- pinctrl-1: Should contain UART mode pin ctrl
+
+Optional properties:
+
+- reset-gpios: GPIO used to reset the device whose initial state keeps low,
+ if the GPIO is missing, then board-level design should be
+ guaranteed.
+- current-speed: Current baud rate of the device whose defaults to 921600
+
+Example:
+
+ uart1_pins_boot: uart1-default {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_GPIO81>;
+ output-low;
+ };
+ };
+
+ uart1_pins_runtime: uart1-runtime {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt7623-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>,
+ <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
+
+ bluetooth {
+ compatible = "mediatek,mt7663u-bluetooth";
+ vcc-supply = <&reg_5v>;
+ reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "runtime";
+ pinctrl-0 = <&uart1_pins_boot>;
+ pinctrl-1 = <&uart1_pins_runtime>;
+ current-speed = <921600>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
index e55af7f0881a..85d7240a9b20 100644
--- a/Documentation/devicetree/bindings/net/nixge.txt
+++ b/Documentation/devicetree/bindings/net/nixge.txt
@@ -1,17 +1,53 @@
* NI XGE Ethernet controller
Required properties:
-- compatible: Should be "ni,xge-enet-2.00"
-- reg: Address and length of the register set for the device
+- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
+ older device trees with DMA engines co-located in the address map,
+ with the one reg entry to describe the whole device.
+- reg: Address and length of the register set for the device. It contains the
+ information of registers in the same order as described by reg-names.
+- reg-names: Should contain the reg names
+ "dma": DMA engine control and status region
+ "ctrl": MDIO and PHY control and status region
- interrupts: Should contain tx and rx interrupt
- interrupt-names: Should be "rx" and "tx"
- phy-mode: See ethernet.txt file in the same directory.
-- phy-handle: See ethernet.txt file in the same directory.
- nvmem-cells: Phandle of nvmem cell containing the MAC address
- nvmem-cell-names: Should be "address"
+Optional properties:
+- mdio subnode to indicate presence of MDIO controller
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+ Use instead of phy-handle.
+- phy-handle: See ethernet.txt file in the same directory.
+
Examples (10G generic PHY):
nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-3.00";
+ reg = <0x40000000 0x4000
+ 0x41002000 0x2000>;
+ reg-names = "dma", "ctrl";
+
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+ phy-handle = <&ethernet_phy1>;
+
+ mdio {
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
+ };
+
+Examples (10G generic PHY, no MDIO):
+ nixge0: ethernet@40000000 {
compatible = "ni,xge-enet-2.00";
reg = <0x40000000 0x6000>;
@@ -24,9 +60,33 @@ Examples (10G generic PHY):
phy-mode = "xgmii";
phy-handle = <&ethernet_phy1>;
+ };
+
+Examples (1G generic fixed-link + MDIO):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-2.00";
+ reg = <0x40000000 0x6000>;
- ethernet_phy1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <4>;
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+
+ fixed-link {
+ speed = <1000>;
+ pause;
+ link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>;
+ };
+
+ mdio {
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
};
+
};
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
new file mode 100644
index 000000000000..fcf5035810b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
@@ -0,0 +1,64 @@
+Qualcomm Ethernet ETHQOS device
+
+This documents dwmmac based ethernet device which supports Gigabit
+ethernet for version v2.3.0 onwards.
+
+This device has following properties:
+
+Required properties:
+
+- compatible: Should be qcom,qcs404-ethqos"
+
+- reg: Address and length of the register set for the device
+
+- reg-names: Should contain register names "stmmaceth", "rgmii"
+
+- clocks: Should contain phandle to clocks
+
+- clock-names: Should contain clock names "stmmaceth", "pclk",
+ "ptp_ref", "rgmii"
+
+- interrupts: Should contain phandle to interrupts
+
+- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
+
+Rest of the properties are defined in stmmac.txt file in same directory
+
+
+Example:
+
+ethernet: ethernet@7a80000 {
+ compatible = "qcom,qcs404-ethqos";
+ reg = <0x07a80000 0x10000>,
+ <0x07a96000 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_ETH_AXI_CLK>,
+ <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+ <&gcc GCC_ETH_PTP_CLK>,
+ <&gcc GCC_ETH_RGMII_CLK>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+ snps,aal;
+ snps,tso;
+
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: phy@4 {
+ device_type = "ethernet-phy";
+ reg = <0x4>;
+ };
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index 1341012722aa..a90eef11dc46 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -14,8 +14,7 @@ Required properties:
- clock-names: Should be "stmmaceth" for the host clock.
Should be "mac-clk-tx" for the MAC TX clock.
Should be "mac-clk-rx" for the MAC RX clock.
- For MPU family need to add also "ethstp" for power mode clock and,
- "syscfg-clk" for SYSCFG clock.
+ For MPU family need to add also "ethstp" for power mode clock
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Should be "macirq" for the main MAC IRQ
@@ -24,9 +23,9 @@ Required properties:
encompases the glue register, and the offset of the control register.
Optional properties:
-- clock-names: For MPU family "mac-clk-ck" for PHY without quartz
-- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock
- by RCC
+- clock-names: For MPU family "eth-ck" for PHY without quartz
+- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
Example:
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
index 0c17a0ec9b7b..7b9a776230c0 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
@@ -4,6 +4,13 @@ This node provides properties for configuring the MediaTek mt76xx wireless
device. The node is expected to be specified as a child node of the PCI
controller to which the wireless chip is connected.
+Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC.
+For SoC, use the compatible string "mediatek,mt7628-wmac" and the following
+properties:
+
+- reg: Address and length of the register set for the device.
+- interrupts: Main device interrupt
+
Optional properties:
- mac-address: See ethernet.txt in the parent directory
@@ -30,3 +37,15 @@ Optional nodes:
};
};
};
+
+MT7628 example:
+
+wmac: wmac@10300000 {
+ compatible = "mediatek,mt7628-wmac";
+ reg = <0x10300000 0x100000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 792bc5fafeb9..7a999a135e56 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -1,7 +1,7 @@
Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs.
+i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs.
Required properties:
- compatible: should be one of
@@ -9,8 +9,10 @@ Required properties:
"fsl,imx6sl-ocotp" (i.MX6SL), or
"fsl,imx6sx-ocotp" (i.MX6SX),
"fsl,imx6ul-ocotp" (i.MX6UL),
+ "fsl,imx6ull-ocotp" (i.MX6ULL/ULZ),
"fsl,imx7d-ocotp" (i.MX7D/S),
"fsl,imx6sll-ocotp" (i.MX6SLL),
+ "fsl,imx7ulp-ocotp" (i.MX7ULP),
followed by "syscon".
- #address-cells : Should be 1
- #size-cells : Should be 1
diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
new file mode 100644
index 000000000000..4881561b3a02
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
@@ -0,0 +1,46 @@
+--------------------------------------------------------------------------
+= Zynq UltraScale+ MPSoC nvmem firmware driver binding =
+--------------------------------------------------------------------------
+The nvmem_firmware node provides access to the hardware related data
+like soc revision, IDCODE... etc, By using the firmware interface.
+
+Required properties:
+- compatible: should be "xlnx,zynqmp-nvmem-fw"
+
+= Data cells =
+Are child nodes of silicon id, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+-------
+ Example
+-------
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ nvmem_firmware {
+ compatible = "xlnx,zynqmp-nvmem-fw";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ soc_revision: soc_revision {
+ reg = <0x0 0x4>;
+ };
+ };
+ };
+};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+ pcap {
+ ...
+
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
+
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index c396c4c0af92..76b6c79604a5 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -129,6 +129,9 @@ Optional properties:
- opp-microamp-<name>: Named opp-microamp property. Similar to
opp-microvolt-<name> property, but for microamp instead.
+- opp-level: A value representing the performance level of the device,
+ expressed as a 32-bit integer.
+
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 6c396f17c91a..816b244a221e 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -1,11 +1,13 @@
* Altera PCIe controller
Required properties:
-- compatible : should contain "altr,pcie-root-port-1.0"
+- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
- reg: a list of physical base address and length for TXS and CRA.
+ For "altr,pcie-root-port-2.0", additional HIP base address and length.
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
+ "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index d514c1f2365f..a7f5f5afa0e6 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -9,6 +9,7 @@ Required properties:
- "fsl,imx6sx-pcie",
- "fsl,imx6qp-pcie"
- "fsl,imx7d-pcie"
+ - "fsl,imx8mq-pcie"
- reg: base address and length of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
@@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
PCIE_PHY power domains
- power-domain-names: Must be "pcie", "pcie_phy"
-Additional required properties for imx7d-pcie:
+Additional required properties for imx7d-pcie and imx8mq-pcie:
- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
IP block
@@ -53,6 +54,11 @@ Additional required properties for imx7d-pcie:
- "pciephy"
- "apps"
- "turnoff"
+- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node.
+
+Additional required properties for imx8mq-pcie:
+- clock-names: Must include the following additional entries:
+ - "pcie_aux"
Example:
@@ -79,3 +85,13 @@ Example:
clocks = <&clks 144>, <&clks 206>, <&clks 189>;
clock-names = "pcie", "pcie_bus", "pcie_phy";
};
+
+* Freescale i.MX7d PCIe PHY
+
+This is the PHY associated with the IMX7d PCIe controller. It's used by the
+PCI-e controller via the fsl,imx7d-pcie-phy phandle.
+
+Required properties:
+- compatible:
+ - "fsl,imx7d-pcie-phy"
+- reg: base address and length of the PCIe PHY controller
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 9b2b8d66d1f4..e20ceaab9b38 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,6 +13,7 @@ information.
Required properties:
- compatible: should contain the platform identifier such as:
+ RC mode:
"fsl,ls1021a-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
"fsl,ls2088a-pcie"
@@ -20,6 +21,8 @@ Required properties:
"fsl,ls1046a-pcie"
"fsl,ls1043a-pcie"
"fsl,ls1012a-pcie"
+ EP mode:
+ "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 976ef7bfff93..6904882a0e94 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -3,6 +3,7 @@
Required properties:
compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7744" for the R8A7744 SoC;
+ "renesas,pcie-r8a774c0" for the R8A774C0 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
@@ -13,7 +14,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a77990" for the R8A77990 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
RZ/G1 compatible device.
- "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
+ "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or
+ RZ/G2 compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 452fe48c4fdd..d5cbfe6b0d89 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -1,14 +1,21 @@
TI PCI Controllers
PCIe DesignWare Controller
- - compatible: Should be "ti,dra7-pcie" for RC
- Should be "ti,dra7-pcie-ep" for EP
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+ Should be "ti,dra7-pcie-ep" for EP (deprecated)
+ Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+ Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+ Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+ Should be "ti,dra726-pcie-ep" for dra72x in EP mode
- phys : list of PHY specifiers (used by generic PHY framework)
- phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
number of PHYs as specified in *phys* property.
- ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
where <X> is the instance number of the pcie from the HW spec.
- num-lanes as specified in ../designware-pcie.txt
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+ module and the register offset to specify lane
+ selection.
HOST MODE
=========
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
new file mode 100644
index 000000000000..1095bc4e72d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
@@ -0,0 +1,20 @@
+Cadence DPHY
+============
+
+Cadence DPHY block.
+
+Required properties:
+- compatible: should be set to "cdns,dphy".
+- reg: physical base address and length of the DPHY registers.
+- clocks: DPHY reference clocks.
+- clock-names: must contain "psm" and "pll_ref".
+- #phy-cells: must be set to 0.
+
+Example:
+ dphy0: dphy@fd0e0000{
+ compatible = "cdns,dphy";
+ reg = <0x0 0xfd0e0000 0x0 0x1000>;
+ clocks = <&psm_clk>, <&pll_ref_clk>;
+ clock-names = "psm", "pll_ref";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
new file mode 100644
index 000000000000..ad49e5c01334
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
@@ -0,0 +1,40 @@
+mvebu armada 38x comphy driver
+------------------------------
+
+This comphy controller can be found on Marvell Armada 38x. It provides a
+number of shared PHYs used by various interfaces (network, sata, usb,
+PCIe...).
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-comphy"
+- reg: should contain the comphy register location and length.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+A sub-node is required for each comphy lane provided by the comphy.
+
+Required properties (child nodes):
+
+- reg: comphy lane number.
+- #phy-cells : from the generic phy bindings, must be 1. Defines the
+ input port to use for a given comphy lane.
+
+Example:
+
+ comphy: phy@18300 {
+ compatible = "marvell,armada-380-comphy";
+ reg = <0x18300 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpm_comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index bfcf80341657..cf2cd86db267 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -1,16 +1,27 @@
-mvebu comphy driver
--------------------
+MVEBU comphy drivers
+--------------------
-A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It
-provides a number of shared PHYs used by various interfaces (network, sata,
-usb, PCIe...).
+COMPHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 7k/8k (on the CP110)
+* Armada 3700
+It provides a number of shared PHYs used by various interfaces (network, SATA,
+USB, PCIe...).
Required properties:
-- compatible: should be "marvell,comphy-cp110"
-- reg: should contain the comphy register location and length.
-- marvell,system-controller: should contain a phandle to the
- system controller node.
+- compatible: should be one of:
+ * "marvell,comphy-cp110" for Armada 7k/8k
+ * "marvell,comphy-a3700" for Armada 3700
+- reg: should contain the COMPHY register(s) location(s) and length(s).
+ * 1 entry for Armada 7k/8k
+ * 4 entries for Armada 3700 along with the corresponding reg-names
+ properties, memory areas are:
+ * Generic COMPHY registers
+ * Lane 1 (PCIe/GbE)
+ * Lane 0 (USB3/GbE)
+ * Lane 2 (SATA/USB3)
+- marvell,system-controller: should contain a phandle to the system
+ controller node (only for Armada 7k/8k)
- #address-cells: should be 1.
- #size-cells: should be 0.
@@ -18,11 +29,11 @@ A sub-node is required for each comphy lane provided by the comphy.
Required properties (child nodes):
-- reg: comphy lane number.
-- #phy-cells : from the generic phy bindings, must be 1. Defines the
+- reg: COMPHY lane number.
+- #phy-cells : from the generic PHY bindings, must be 1. Defines the
input port to use for a given comphy lane.
-Example:
+Examples:
cpm_comphy: phy@120000 {
compatible = "marvell,comphy-cp110";
@@ -41,3 +52,33 @@ Example:
#phy-cells = <1>;
};
};
+
+ comphy: phy@18300 {
+ compatible = "marvell,comphy-a3700";
+ reg = <0x18300 0x300>,
+ <0x1F000 0x400>,
+ <0x5C000 0x400>,
+ <0xe0178 0x8>;
+ reg-names = "comphy",
+ "lane1_pcie_gbe",
+ "lane0_usb3_gbe",
+ "lane2_sata_usb3";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+
+ comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
new file mode 100644
index 000000000000..aa99ceec73b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
@@ -0,0 +1,38 @@
+MVEBU A3700 UTMI PHY
+--------------------
+
+USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 3700
+
+On Armada 3700, there are two USB controllers, one is compatible with the USB2
+and USB3 specifications and supports OTG. The other one is USB2 compliant and
+only supports host mode. Both of these controllers come with a slightly
+different UTMI PHY.
+
+Required Properties:
+
+- compatible: Should be one of:
+ * "marvell,a3700-utmi-host-phy" for the PHY connected to
+ the USB2 host-only controller.
+ * "marvell,a3700-utmi-otg-phy" for the PHY connected to
+ the USB3 and USB2 OTG capable controller.
+- reg: PHY IP register range.
+- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared
+ region covering registers related to both the host
+ controller and the PHY.
+- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0.
+
+
+Example:
+
+ usb2_utmi_host_phy: phy@5f000 {
+ compatible = "marvell,armada-3700-utmi-host-phy";
+ reg = <0x5f000 0x800>;
+ marvell,usb-misc-reg = <&usb2_syscon>;
+ #phy-cells = <0>;
+ };
+
+ usb2_syscon: system-controller@5f800 {
+ compatible = "marvell,armada-3700-usb2-host-misc", "syscon";
+ reg = <0x5f800 0x800>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index 074a7b3b0425..00639baae74a 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -23,6 +23,8 @@ Optional properties:
register files". When set driver will request its
phandle as one companion-grf for some special SoCs
(e.g RV1108).
+ - extcon : phandle to the extcon device providing the cable state for
+ the otg phy.
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify host or otg port,
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 41a1074228ba..5d181fc3cc18 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,6 +9,8 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+ "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
+ "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
@@ -42,6 +44,10 @@ Required properties:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
+ For "qcom,msm8998-qmp-usb3-phy" must contain:
+ "aux", "cfg_ahb", "ref".
+ For "qcom,msm8998-qmp-ufs-phy" must contain:
+ "ref", "ref_aux".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@@ -61,6 +67,9 @@ Required properties:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
"phy", "common".
+ For "qcom,msm8998-qmp-usb3-phy" must contain
+ "phy", "common".
+ For "qcom,msm8998-qmp-ufs-phy": no resets are listed.
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index 03025d97998b..fe29f9e0af6d 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- compatible: compatible list, contains
"qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+ "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
"qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
- reg: offset and length of the PHY register set.
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index de7b5393c163..ad9c290d8f15 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -6,6 +6,8 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
SoC.
+ "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
+ SoC.
"renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
"renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 57dfda8a7a1d..8f93c3b694a7 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -35,6 +35,7 @@ Required properties:
DRA7x
Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
in DRA7x
+ Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 3e23fece99da..eb39f5051159 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -19,7 +19,7 @@ such as pull-up, multi drive, etc.
Required properties for iomux controller:
- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
- or "atmel,sama5d3-pinctrl"
+ or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
configured in this periph mode. All the periph and bank need to be describe.
@@ -100,6 +100,7 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
11 - High
OUTPUT (1 << 7): indicate this pin need to be configured as an output.
OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low)
+SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable
DEBOUNCE (1 << 16): indicate this pin needs debounce.
DEBOUNCE_VAL (0x3fff << 17): debounce value.
@@ -116,6 +117,19 @@ Some requirements for using atmel,at91rm9200-pinctrl binding:
configurations by referring to the phandle of that pin configuration node.
4. The gpio controller must be describe in the pinctrl simple-bus.
+For each bank the required properties are:
+- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
+ "microchip,sam9x60-gpio"
+- reg: physical base address and length of the controller's registers
+- interrupts: interrupt outputs from the controller
+- interrupt-controller: marks the device node as an interrupt controller
+- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt
+ for more details.
+- gpio-controller
+- #gpio-cells: should be 2; the first cell is the GPIO number and the second
+ cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>.
+- clocks: bank clock
+
Examples:
pinctrl@fffff400 {
@@ -125,6 +139,17 @@ pinctrl@fffff400 {
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
reg = <0xfffff400 0x600>;
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+
atmel,mux-mask = <
/* A B */
0xffffffff 0xffc00c3b /* pioA */
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
new file mode 100644
index 000000000000..6da01d619d33
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX50 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx50-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx50 datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE (1 << 13)
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE (1 << 3)
+PAD_CTL_DSE_LOW (0 << 1)
+PAD_CTL_DSE_MED (1 << 1)
+PAD_CTL_DSE_HIGH (2 << 1)
+PAD_CTL_DSE_MAX (3 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx50-pinfunc.h in device tree source folder for all available
+imx50 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
new file mode 100644
index 000000000000..524a16fca666
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale IMX8MM IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+for common binding part and usage.
+
+Required properties:
+- compatible: "fsl,imx8mm-iomuxc"
+- reg: should contain the base physical address and size of the iomuxc
+ registers.
+
+Required properties in sub-nodes:
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini
+ Reference Manual for detailed CONFIG settings.
+
+Examples:
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+iomuxc: pinctrl@30330000 {
+ compatible = "fsl,imx8mm-iomuxc";
+ reg = <0x0 0x30330000 0x0 0x10000>;
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index c7c088d2dd50..38dc56a57760 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -58,11 +58,11 @@ group pwm3
- functions pwm, gpio
group pmic1
- - pin 17
+ - pin 7
- functions pmic, gpio
group pmic0
- - pin 16
+ - pin 6
- functions pmic, gpio
group i2c2
@@ -112,19 +112,31 @@ group usb2_drvvbus1
- functions drvbus, gpio
group sdio_sb
- - pins 60-64
+ - pins 60-65
- functions sdio, gpio
group rgmii
- - pins 42-55
+ - pins 42-53
- functions mii, gpio
group pcie1
- - pins 39-40
+ - pins 39
+ - functions pcie, gpio
+
+group pcie1_clkreq
+ - pins 40
- functions pcie, gpio
+group pcie1_wakeup
+ - pins 41
+ - functions pcie, gpio
+
+group smi
+ - pins 54-55
+ - functions smi, gpio
+
group ptp
- - pins 56-58
+ - pins 56
- functions ptp, gpio
group ptp_clk
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 82ead40311f6..a47dd990a8d3 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -23,11 +23,11 @@ The GPIO bank for the controller is represented as a sub-node and it acts as a
GPIO controller.
Required properties for sub-nodes are:
- - reg: should contain address and size for mux, pull-enable, pull and
- gpio register sets
- - reg-names: an array of strings describing the "reg" entries. Must
- contain "mux", "pull" and "gpio". "pull-enable" is optional and
- when it is missing the "pull" registers are used instead
+ - reg: should contain a list of address and size, one tuple for each entry
+ in reg-names.
+ - reg-names: an array of strings describing the "reg" entries.
+ Must contain "mux" and "gpio".
+ May contain "pull", "pull-enable" and "ds" when appropriate.
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 759aa1732e48..7f64a7e92c28 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -19,6 +19,7 @@ PMIC's from Qualcomm.
"qcom,pm8998-gpio"
"qcom,pma8084-gpio"
"qcom,pmi8994-gpio"
+ "qcom,pmi8998-gpio"
"qcom,pms405-gpio"
And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
index 7c947a996df1..7c7e972aaa42 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
@@ -32,6 +32,9 @@ Required properties:
Optional properties:
- power-supply: Power supply used to power the domain
+- clocks: a number of phandles to clocks that need to be enabled during
+ domain power-up sequencing to ensure reset propagation into devices
+ located inside this power domain
Example:
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
new file mode 100644
index 000000000000..980e5413d18f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
@@ -0,0 +1,145 @@
+Qualcomm RPM/RPMh Power domains
+
+For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
+which then translates it into a corresponding voltage on a rail
+
+Required Properties:
+ - compatible: Should be one of the following
+ * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
+ * qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
+ - #power-domain-cells: number of cells in Power domain specifier
+ must be 1.
+ - operating-points-v2: Phandle to the OPP table for the Power domain.
+ Refer to Documentation/devicetree/bindings/power/power_domain.txt
+ and Documentation/devicetree/bindings/opp/opp.txt for more details
+
+Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
+various OPPs for different platforms as well as Power domain indexes
+
+Example: rpmh power domain controller and OPP table
+
+#include <dt-bindings/power/qcom-rpmhpd.h>
+
+opp-level values specified in the OPP tables for RPMh power domains
+should use the RPMH_REGULATOR_LEVEL_* constants from
+<dt-bindings/power/qcom-rpmhpd.h>
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdm845-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+
+Example: rpm power domain controller and OPP table
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_low: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp_ret: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp_normal: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp_high: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+
+Example: Client/Consumer device using OPP table
+
+ leaky-device0@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&rpmhpd SDM845_MX>;
+ operating-points-v2 = <&leaky_opp_table>;
+ };
+
+
+ leaky_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp1 {
+ opp-hz = /bits/ 64 <144000>;
+ required-opps = <&rpmhpd_opp_low>;
+ };
+
+ opp2 {
+ opp-hz = /bits/ 64 <400000>;
+ required-opps = <&rpmhpd_opp_ret>;
+ };
+
+ opp3 {
+ opp-hz = /bits/ 64 <20000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp4 {
+ opp-hz = /bits/ 64 <25000000>;
+ required-opps = <&rpmpd_opp_normal>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 000000000000..d366f1eb623a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,25 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-power"
+ - interrupts: Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
index 89871ab8c704..5c913d4cf36c 100644
--- a/Documentation/devicetree/bindings/power/supply/battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/battery.txt
@@ -16,6 +16,7 @@ Required Properties:
Optional Properties:
- voltage-min-design-microvolt: drained battery voltage
+ - voltage-max-design-microvolt: fully charged battery voltage
- energy-full-design-microwatt-hours: battery design energy
- charge-full-design-microamp-hours: battery design capacity
- precharge-current-microamp: current for pre-charge phase
@@ -48,6 +49,7 @@ Example:
bat: battery {
compatible = "simple-battery";
voltage-min-design-microvolt = <3200000>;
+ voltage-max-design-microvolt = <4200000>;
energy-full-design-microwatt-hours = <5290000>;
charge-full-design-microamp-hours = <1430000>;
precharge-current-microamp = <256000>;
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
index fc35ac577401..0a5705b8b592 100644
--- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
@@ -9,8 +9,8 @@ Required properties:
"sprd,sc2731-fgu".
- reg: The address offset of fuel gauge unit.
- battery-detect-gpios: GPIO for battery detection.
-- io-channels: Specify the IIO ADC channel to get temperature.
-- io-channel-names: Should be "bat-temp".
+- io-channels: Specify the IIO ADC channels to get temperature and charge voltage.
+- io-channel-names: Should be "bat-temp" or "charge-vol".
- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
- nvmem-cell-names: Should be "fgu_calib".
- monitored-battery: Phandle of battery characteristics devicetree node.
@@ -47,8 +47,8 @@ Example:
compatible = "sprd,sc2731-fgu";
reg = <0xa00>;
battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
- io-channels = <&pmic_adc 5>;
- io-channel-names = "bat-temp";
+ io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+ io-channel-names = "bat-temp", "charge-vol";
nvmem-cells = <&fgu_calib>;
nvmem-cell-names = "fgu_calib";
monitored-battery = <&bat>;
diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
new file mode 100644
index 000000000000..8d1b8200ebd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
@@ -0,0 +1,34 @@
+-----------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC PM domains
+-----------------------------------------------------------
+The binding for zynqmp-power-controller follow the common
+generic PM domain binding[1].
+
+[1] Documentation/devicetree/bindings/power/power_domain.txt
+
+== Zynq MPSoC Generic PM Domain Node ==
+
+Required property:
+ - Below property should be in zynqmp-firmware node.
+ - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1.
+
+Power domain ID indexes are mentioned in
+include/dt-bindings/power/xlnx-zynqmp-power.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ ...
+ #power-domain-cells = <1>;
+ ...
+ };
+};
+
+sata {
+ ...
+ power-domains = <&zynqmp_firmware 28>;
+ ...
+};
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt
index 45ce054d844d..bfd33734faca 100644
--- a/Documentation/devicetree/bindings/property-units.txt
+++ b/Documentation/devicetree/bindings/property-units.txt
@@ -31,6 +31,7 @@ Electricity
-microwatt-hours: micro Watt-hours
-microvolt : micro volts
-picofarads : picofarads
+-femtofarads : femtofarads
Temperature
----------------------------------------
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
index c5d0e7998e2b..454c937076a2 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
@@ -17,6 +17,11 @@ Clock Properties:
- fsl,tmr-fiper1 Fixed interval period pulse generator.
- fsl,tmr-fiper2 Fixed interval period pulse generator.
- fsl,max-adj Maximum frequency adjustment in parts per billion.
+ - fsl,extts-fifo The presence of this property indicates hardware
+ support for the external trigger stamp FIFO.
+ - little-endian The presence of this property indicates the 1588 timer
+ IP block is little-endian mode. The default endian mode
+ is big-endian.
These properties set the operational parameters for the PTP
clock. You must choose these carefully for the clock to work right.
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
index c8c831d7b0d1..591ecdd39c7b 100644
--- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
@@ -5,6 +5,7 @@ Required properties:
- "atmel,at91sam9rl-pwm"
- "atmel,sama5d3-pwm"
- "atmel,sama5d2-pwm"
+ - "microchip,sam9x60-pwm"
- reg: physical base address and length of the controller's registers
- #pwm-cells: Should be 3. See pwm.txt in this directory for a
description of the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
index fa7849d67836..daedfef09bb6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
@@ -5,6 +5,8 @@ Required properties:
The SoC specific strings supported including:
"hisilicon,hi3516cv300-pwm"
"hisilicon,hi3519v100-pwm"
+ "hisilicon,hi3559v100-shub-pwm"
+ "hisilicon,hi3559v100-pwm
- reg: physical base address and length of the controller's registers.
- clocks: phandle and clock specifier of the PWM reference clock.
- resets: phandle and reset specifier for the PWM controller reset.
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
index 54a3f2c80e3a..e7fc045281d1 100644
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -1,7 +1,8 @@
Binding for Fairchild FAN53555 regulators
Required properties:
- - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
+ - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
+ "silergy,syr828"
- reg: I2C address
Optional properties:
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
deleted file mode 100644
index 0c2a6c8a1536..000000000000
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Fixed Voltage regulators
-
-Required properties:
-- compatible: Must be "regulator-fixed";
-- regulator-name: Defined in regulator.txt as optional, but required here.
-
-Optional properties:
-- gpio: gpio to use for enable control
-- startup-delay-us: startup time in microseconds
-- enable-active-high: Polarity of GPIO is Active high
-If this property is missing, the default assumed is Active low.
-- gpio-open-drain: GPIO is open drain type.
- If this property is missing then default assumption is false.
--vin-supply: Input supply name.
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-However a fixed voltage regulator is expected to have the
-regulator-min-microvolt and regulator-max-microvolt
-to be the same.
-
-Example:
-
- abc: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 16 0>;
- startup-delay-us = <70000>;
- enable-active-high;
- regulator-boot-on;
- gpio-open-drain;
- vin-supply = <&parent_reg>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
new file mode 100644
index 000000000000..d289c2f7455a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed Voltage regulators
+
+maintainers:
+ - Liam Girdwood <lgirdwood@gmail.com>
+ - Mark Brown <broonie@kernel.org>
+
+description:
+ Any property defined as part of the core regulator binding, defined in
+ regulator.txt, can also be used. However a fixed voltage regulator is
+ expected to have the regulator-min-microvolt and regulator-max-microvolt
+ to be the same.
+
+properties:
+ compatible:
+ const: regulator-fixed
+
+ regulator-name: true
+
+ gpio:
+ description: gpio to use for enable control
+ maxItems: 1
+
+ startup-delay-us:
+ description: startup time in microseconds
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ enable-active-high:
+ description:
+ Polarity of GPIO is Active high. If this property is missing,
+ the default assumed is Active low.
+ type: boolean
+
+ gpio-open-drain:
+ description:
+ GPIO is open drain type. If this property is missing then default
+ assumption is false.
+ type: boolean
+
+ vin-supply:
+ description: Input supply phandle.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - regulator-name
+
+examples:
+ - |
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 16 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio-open-drain;
+ vin-supply = <&parent_reg>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
new file mode 100644
index 000000000000..f1cbe813c30f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
@@ -0,0 +1,41 @@
+Regulator driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The regulator controller is represented as a sub-node of the PMIC node
+on the device tree.
+
+The device has a single LDO regulator and a SIMO buck-boost regulator with
+three independent power rails.
+
+Required properties:
+--------------------
+- compatible: Must be "maxim,max77650-regulator"
+
+Each rail must be instantiated under the regulators subnode of the top PMIC
+node. Up to four regulators can be defined. For standard regulator properties
+refer to Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2".
+
+Example:
+--------
+
+ regulators {
+ compatible = "maxim,max77650-regulator";
+
+ max77650_ldo: regulator@0 {
+ regulator-compatible = "ldo";
+ regulator-name = "max77650-ldo";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <2937500>;
+ };
+
+ max77650_sbb0: regulator@1 {
+ regulator-compatible = "sbb0";
+ regulator-name = "max77650-sbb0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1587500>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index f9be1acf891c..4d3b12b92cb3 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -8,7 +8,7 @@ Optional properties:
- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
regulators to save power consumption. Attention, ensure that all important
regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
- property. If not present, the switched regualtors are always on and can't be
+ property. If not present, the switched regulators are always on and can't be
disabled. This binding is a workaround to keep backward compatibility with
old dtb's which rely on the fact that the switched regulators are always on
and don't mark them explicit as "regulator-always-on".
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
new file mode 100644
index 000000000000..698cfc3bc3dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
@@ -0,0 +1,68 @@
+ROHM BD70528 Power Management Integrated Circuit regulator bindings
+
+Required properties:
+ - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
+ "led_ldo1", "led_ldo2"
+
+List of regulators provided by this controller. BD70528 regulators node
+should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at
+Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+
+The valid names for BD70528 regulator nodes are:
+BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <125>;
+ };
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <125>;
+ };
+ buck3: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <250>;
+ };
+ ldo1: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ ldo2: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ led_ldo1: LED_LDO1 {
+ regulator-name = "led_ldo1";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <300000>;
+ };
+ led_ldo2: LED_LDO2 {
+ regulator-name = "led_ldo2";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <300000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
index 4b98ca26e61a..cbce62c22b60 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
@@ -27,8 +27,38 @@ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
Optional properties:
+- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV.
+ See below table for bucks which support this.
+- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV.
+ See below table for bucks which support this.
+- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV.
+ See below table for bucks which support this.
- Any optional property defined in bindings/regulator/regulator.txt
+Supported default DVS states:
+
+BD71837:
+buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+-----------------------------------------------------------------------------
+1 | supported | supported | supported
+----------------------------------------------------------------------------
+2 | supported | supported | not supported
+----------------------------------------------------------------------------
+3 | supported | not supported | not supported
+----------------------------------------------------------------------------
+4 | supported | not supported | not supported
+----------------------------------------------------------------------------
+rest | not supported | not supported | not supported
+
+BD71847:
+buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+-----------------------------------------------------------------------------
+1 | supported | supported | supported
+----------------------------------------------------------------------------
+2 | supported | supported | not supported
+----------------------------------------------------------------------------
+rest | not supported | not supported | not supported
+
Example:
regulators {
buck1: BUCK1 {
@@ -36,7 +66,11 @@ regulators {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ regulator-always-on;
regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <900000>;
+ rohm,dvs-idle-voltage = <850000>;
+ rohm,dvs-suspend-voltage = <800000>;
};
buck2: BUCK2 {
regulator-name = "buck2";
@@ -45,18 +79,22 @@ regulators {
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ rohm,dvs-run-voltage = <1000000>;
};
buck4: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
+ rohm,dvs-run-voltage = <1000000>;
};
buck5: BUCK5 {
regulator-name = "buck5";
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
index a3f476240565..6189df71ea98 100644
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
@@ -23,16 +23,14 @@ Switches are fixed voltage regulators with only enable/disable capability.
Optional properties:
- st,mask-reset: mask reset for this regulator: the regulator configuration
is maintained during pmic reset.
-- regulator-pull-down: enable high pull down
- if not specified light pull down is used
- regulator-over-current-protection:
if set, all regulators are switched off in case of over-current detection
on this regulator,
if not set, the driver only sends an over-current event.
-- interrupt-parent: phandle to the parent interrupt controller
- interrupts: index of current limit detection interrupt
- <regulator>-supply: phandle to the parent supply/regulator node
each regulator supply can be described except vref_ddr.
+- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2.
Example:
regulators {
@@ -43,7 +41,6 @@ regulators {
vdd_core: buck1 {
regulator-name = "vdd_core";
interrupts = <IT_CURLIM_BUCK1 0>;
- interrupt-parent = <&pmic>;
st,mask-reset;
regulator-pull-down;
regulator-min-microvolt = <700000>;
@@ -53,7 +50,6 @@ regulators {
v3v3: buck4 {
regulator-name = "v3v3";
interrupts = <IT_CURLIM_BUCK4 0>;
- interrupt-parent = <&mypmic>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
index 02f0e9bbfbf8..54aded3b78e2 100644
--- a/Documentation/devicetree/bindings/regulator/tps65218.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -71,8 +71,13 @@ tps65218: tps65218@24 {
regulator-always-on;
};
+ ls2: regulator-ls2 {
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <1000000>;
+ };
+
ls3: regulator-ls3 {
- regulator-min-microvolt = <100000>;
- regulator-max-microvolt = <1000000>;
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <1000000>;
};
};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
index a842a782b557..66af2c30944f 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
@@ -35,7 +35,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core.
Value type: <stringlist>
Definition: List of clock input name strings sorted in the same
order as the clocks property. Definition must have
- "xo", "sway_cbcr", "lpass_aon", "lpass_ahbs_aon_cbcr",
+ "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
"lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
and "qdsp6ss_core".
@@ -100,13 +100,12 @@ ADSP, as it is found on SDM845 boards.
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_LPASS_SWAY_CLK>,
- <&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>,
<&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
<&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
<&lpasscc LPASS_QDSP6SS_XO_CLK>,
<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
- clock-names = "xo", "sway_cbcr", "lpass_aon",
+ clock-names = "xo", "sway_cbcr",
"lpass_ahbs_aon_cbcr",
"lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
"qdsp6ss_sleep", "qdsp6ss_core";
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
index 9c0cff3a5ed8..292dfda9770d 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
@@ -19,13 +19,30 @@ on the Qualcomm ADSP Hexagon core.
- interrupts-extended:
Usage: required
Value type: <prop-encoded-array>
- Definition: must list the watchdog, fatal IRQs ready, handover and
- stop-ack IRQs
+ Definition: reference to the interrupts that match interrupt-names
- interrupt-names:
Usage: required
Value type: <stringlist>
- Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+ Definition: The interrupts needed depends on the compatible
+ string:
+ qcom,msm8974-adsp-pil:
+ qcom,msm8996-adsp-pil:
+ qcom,msm8996-slpi-pil:
+ qcom,qcs404-adsp-pas:
+ qcom,qcs404-cdsp-pas:
+ qcom,sdm845-adsp-pas:
+ qcom,sdm845-cdsp-pas:
+ must be "wdog", "fatal", "ready", "handover", "stop-ack"
+ qcom,qcs404-wcss-pas:
+ must be "wdog", "fatal", "ready", "handover", "stop-ack",
+ "shutdown-ack"
+
+- firmware-name:
+ Usage: optional
+ Value type: <string>
+ Definition: must list the relative firmware image path for the
+ Hexagon Core.
- clocks:
Usage: required
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 9ff5b0309417..41ca5df5be5a 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -28,24 +28,51 @@ on the Qualcomm Hexagon core.
- interrupts-extended:
Usage: required
Value type: <prop-encoded-array>
- Definition: must list the watchdog, fatal IRQs ready, handover and
- stop-ack IRQs
+ Definition: reference to the interrupts that match interrupt-names
- interrupt-names:
Usage: required
Value type: <stringlist>
- Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+ Definition: The interrupts needed depends on the the compatible
+ string:
+ qcom,q6v5-pil:
+ qcom,ipq8074-wcss-pil:
+ qcom,msm8916-mss-pil:
+ qcom,msm8974-mss-pil:
+ must be "wdog", "fatal", "ready", "handover", "stop-ack"
+ qcom,msm8996-mss-pil:
+ qcom,sdm845-mss-pil:
+ must be "wdog", "fatal", "ready", "handover", "stop-ack",
+ "shutdown-ack"
+
+- firmware-name:
+ Usage: optional
+ Value type: <stringlist>
+ Definition: must list the relative firmware image paths for mba and
+ modem. They are used for booting and authenticating the
+ Hexagon core.
- clocks:
Usage: required
Value type: <phandle>
- Definition: reference to the iface, bus and mem clocks to be held on
- behalf of the booting of the Hexagon core
+ Definition: reference to the clocks that match clock-names
- clock-names:
Usage: required
Value type: <stringlist>
- Definition: must be "iface", "bus", "mem"
+ Definition: The clocks needed depend on the compatible string:
+ qcom,ipq8074-wcss-pil:
+ no clock names required
+ qcom,q6v5-pil:
+ qcom,msm8916-mss-pil:
+ qcom,msm8974-mss-pil:
+ must be "iface", "bus", "mem", "xo"
+ qcom,msm8996-mss-pil:
+ must be "iface", "bus", "mem", "xo", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "pnoc", "qdss"
+ qcom,sdm845-mss-pil:
+ must be "iface", "bus", "mem", "xo", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "prng"
- resets:
Usage: required
@@ -65,6 +92,19 @@ on the Qualcomm Hexagon core.
must be "mss_restart", "pdc_reset" for the modem
sub-system on SDM845 SoCs
+For the compatible strings below the following supplies are required:
+ "qcom,q6v5-pil"
+ "qcom,msm8916-mss-pil",
+- cx-supply:
+- mx-supply:
+- pll-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the regulators to be held on behalf of the
+ booting of the Hexagon core
+
+For the compatible string below the following supplies are required:
+ "qcom,msm8974-mss-pil"
- cx-supply:
- mss-supply:
- mx-supply:
@@ -74,6 +114,33 @@ on the Qualcomm Hexagon core.
Definition: reference to the regulators to be held on behalf of the
booting of the Hexagon core
+For the compatible string below the following supplies are required:
+ "qcom,msm8996-mss-pil"
+- pll-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the regulators to be held on behalf of the
+ booting of the Hexagon core
+
+- power-domains:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to power-domains that match power-domain-names
+
+- power-domain-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: The power-domains needed depend on the compatible string:
+ qcom,q6v5-pil:
+ qcom,ipq8074-wcss-pil:
+ qcom,msm8916-mss-pil:
+ qcom,msm8974-mss-pil:
+ no power-domain names required
+ qcom,msm8996-mss-pil:
+ must be "cx", "mx"
+ qcom,sdm845-mss-pil:
+ must be "cx", "mx", "mss", "load_state"
+
- qcom,smem-states:
Usage: required
Value type: <phandle>
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
new file mode 100644
index 000000000000..6e5341b4f891
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
@@ -0,0 +1,27 @@
+Broadcom STB SW_INIT-style reset controller
+===========================================
+
+Broadcom STB SoCs have a SW_INIT-style reset controller with separate
+SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
+reset lines.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: should be brcm,brcmstb-reset
+- reg: register base and length
+- #reset-cells: must be set to 1
+
+Example:
+
+ reset: reset-controller@8404318 {
+ compatible = "brcm,brcmstb-reset";
+ reg = <0x8404318 0x30>;
+ #reset-cells = <1>;
+ };
+
+ &ethernet_switch {
+ resets = <&reset>;
+ reset-names = "switch";
+ };
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index 1ab1d109318e..2ecf33815d18 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -5,7 +5,9 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
-- compatible: Should be "fsl,imx7d-src", "syscon"
+- compatible:
+ - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
+ - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
@@ -44,4 +46,5 @@ Example:
For list of all valid reset indicies see
-<dt-bindings/reset/imx7-reset.h>
+<dt-bindings/reset/imx7-reset.h> for i.MX7 and
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
new file mode 100644
index 000000000000..27a45fe5ecf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -0,0 +1,52 @@
+--------------------------------------------------------------------------
+ = Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: "xlnx,zynqmp-reset"
+- #reset-cells: Specifies the number of cells needed to encode reset
+ line, should be 1
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ zynqmp_reset: reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
+ };
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+Example:
+
+serdes: zynqmp_phy@fd400000 {
+ ...
+
+ resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+ reset-names = "sata_rst";
+
+ ...
+};
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
index 18b892d010d8..2405e35a1bc0 100644
--- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -16,6 +16,7 @@ Required properties:
"abracon,ab1803"
"abracon,ab1804"
"abracon,ab1805"
+ "microcrystal,rv1805"
Using "abracon,abx80x" will enable chip autodetection.
- "reg": I2C bus address of the device
diff --git a/Documentation/devicetree/bindings/rtc/cdns,rtc.txt b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
new file mode 100644
index 000000000000..14a04487b432
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
@@ -0,0 +1,25 @@
+Cadence Real Time Clock
+
+The Cadence RTC controller with date, time and alarm capabilities.
+The alarm may wake the system from low-power state.
+
+Required properties:
+- compatible: Should be "cdns,rtc-r109v3"
+- reg: Specifies base physical address and size of the register area.
+- interrupts: A single interrupt specifier.
+- clocks: Must contain two entries:
+ - pclk: APB registers clock
+ - ref_clk: reference 1Hz or 100Hz clock, depending on IP configuration
+ See ../clocks/clock-bindings.txt for details.
+
+Example:
+ rtc0: rtc@fd080000 {
+ compatible = "cdns,rtc-r109v3";
+ reg = <0xfd080000 0x1000>;
+
+ clock-names = "pclk", "ref_clk";
+ clocks = <&sysclock>, <&refclock>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
new file mode 100644
index 000000000000..51f003006f04
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
@@ -0,0 +1,38 @@
+Intersil ISL1209/19 I2C RTC/Alarm chip with event in
+
+ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the
+ISL1208 and ISL1218 do not. They are all use the same driver with the bindings
+described here, with chip specific properties as noted.
+
+Required properties supported by the device:
+ - "compatible": Should be one of the following:
+ - "isil,isl1208"
+ - "isil,isl1209"
+ - "isil,isl1218"
+ - "isil,isl1219"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+ - "interrupt-names": list which may contains "irq" and "evdet"
+ evdet applies to isl1209 and isl1219 only
+ - "interrupts": list of interrupts for "irq" and "evdet"
+ evdet applies to isl1209 and isl1219 only
+ - "isil,ev-evienb": Enable or disable internal pull on EVIN pin
+ Applies to isl1209 and isl1219 only
+ Possible values are 0 and 1
+ Value 0 enables internal pull-up on evin pin, 1 disables it.
+ Default will leave the non-volatile configuration of the pullup
+ as is.
+
+Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin
+connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin.
+
+ isl1219: rtc@68 {
+ compatible = "isil,isl1219";
+ reg = <0x68>;
+ interrupt-names = "irq", "evdet";
+ interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
+ <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
+ isil,ev-evienb = <1>;
+ };
+
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
deleted file mode 100644
index c3efd48e91c2..000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Intersil ISL1219 I2C RTC/Alarm chip with event in
-
-ISL1219 has additional pins EVIN and #EVDET for tamper detection.
-
-Required properties supported by the device:
-
- - "compatible": must be "isil,isl1219"
- - "reg": I2C bus address of the device
-
-Optional properties:
-
- - "interrupt-names": list which may contains "irq" and "evdet"
- - "interrupts": list of interrupts for "irq" and "evdet"
- - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified
- value for proper operation.
-
-
-Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
- and #EVDET pin connected to SoC gpio2 pin 24:
-
- isl1219: rtc@68 {
- compatible = "isil,isl1219";
- reg = <0x68>;
- interrupt-names = "irq", "evdet";
- interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
- <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
- isil,ev-evienb = <1>;
- };
-
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
new file mode 100644
index 000000000000..d3e380ad712d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
@@ -0,0 +1,18 @@
+* NXP PCF85063 Real Time Clock
+
+Required properties:
+- compatible: Should contain "nxp,pcf85063".
+- reg: I2C address for chip.
+
+Optional property:
+- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
+ expressed in femto Farad (fF). Valid values are 7000 and 12500.
+ Default value (if no value is specified) is 7000fF.
+
+Example:
+
+pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063";
+ reg = <0x51>;
+ quartz-load-femtofarads = <12500>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt
new file mode 100644
index 000000000000..0b1080c60f63
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt
@@ -0,0 +1,18 @@
+* NXP PCF8523 Real Time Clock
+
+Required properties:
+- compatible: Should contain "nxp,pcf8523".
+- reg: I2C address for chip.
+
+Optional property:
+- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
+ expressed in femto Farad (fF). Valid values are 7000 and 12500.
+ Default value (if no value is specified) is 12500fF.
+
+Example:
+
+pcf8523: rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ quartz-load-femtofarads = <7000>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson.txt b/Documentation/devicetree/bindings/rtc/rtc-meson.txt
new file mode 100644
index 000000000000..e921fe66a362
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-meson.txt
@@ -0,0 +1,35 @@
+* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
+
+Required properties:
+- compatible: should be one of the following describing the hardware:
+ * "amlogic,meson6-rtc"
+ * "amlogic,meson8-rtc"
+ * "amlogic,meson8b-rtc"
+ * "amlogic,meson8m2-rtc"
+
+- reg: physical register space for the controller's memory mapped registers.
+- interrupts: the interrupt line of the RTC block.
+- clocks: reference to the external 32.768kHz crystal oscillator.
+- vdd-supply: reference to the power supply of the RTC block.
+- resets: reset controller reference to allow reset of the controller
+
+Optional properties for the battery-backed non-volatile memory:
+- #address-cells: should be 1 to address the battery-backed non-volatile memory
+- #size-cells: should be 1 to reference the battery-backed non-volatile memory
+
+Optional child nodes:
+- see ../nvmem/nvmem.txt
+
+Example:
+
+ rtc: rtc@740 {
+ compatible = "amlogic,meson6-rtc";
+ reg = <0x740 0x14>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&rtc32k_xtal>;
+ vdd-supply = <&rtc_vdd>;
+ resets = <&reset RESET_RTC>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt
index 7c8da6926095..f4687c68c08c 100644
--- a/Documentation/devicetree/bindings/rtc/rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc.txt
@@ -21,12 +21,16 @@ Optional properties
The following properties may not be supported by all drivers. However, if a
driver wants to support one of the below features, it should adapt the bindings
below.
-- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given
- if trickle charger should be enabled
-- trickle-diode-disable : Do not use internal trickle charger diode Should be
- given if internal trickle charger diode should be
- disabled
-- wakeup-source : Enables wake up of host system on alarm
+- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given
+ if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode Should be
+ given if internal trickle charger diode should be
+ disabled
+- wakeup-source : Enables wake up of host system on alarm
+- quartz-load-femtofarads : The capacitive load of the quartz(x-tal),
+ expressed in femto Farad (fF).
+ The default value shall be listed (if optional),
+ and likewise all valid values.
Trivial RTCs
------------
@@ -39,21 +43,23 @@ possibly an interrupt line.
Compatible Vendor / Chip
========== =============
abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface
+abracon,abeoz9 AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface
dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
dallas,ds1672 Dallas DS1672 Real-time Clock
dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM
epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+epson,rx8571 I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
emmicro,em3027 EM Microelectronic EM3027 Real-time Clock
isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM
isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM
isil,isl12022 Intersil ISL12022 Real-time Clock
+microcrystal,rv3028 Real Time Clock Module with I2C-Bus
microcrystal,rv3029 Real Time Clock Module with I2C-Bus
+microcrystal,rv8523 Real Time Clock
nxp,pcf2127 Real-time clock
nxp,pcf2129 Real-time clock
-nxp,pcf8523 Real-time Clock
nxp,pcf8563 Real-time clock/calendar
-nxp,pcf85063 Tiny Real-Time Clock
pericom,pt7c4338 Real-time Clock Module
ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
@@ -62,3 +68,4 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
sii,s35390a 2-wire CMOS real-time clock
+whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index da50321da34d..3cba12f855b7 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -21,6 +21,7 @@ Required properties:
- "altr,16550-FIFO128"
- "fsl,16550-FIFO64"
- "fsl,ns16550"
+ - "intel,xscale-uart"
- "ti,da830-uart"
- "aspeed,ast2400-vuart"
- "aspeed,ast2500-vuart"
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
index c3c6406d5cfe..24ed8769f4af 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
@@ -6,7 +6,8 @@ Required properties:
- "ingenic,jz4760-uart",
- "ingenic,jz4770-uart",
- "ingenic,jz4775-uart",
- - "ingenic,jz4780-uart".
+ - "ingenic,jz4780-uart",
+ - "ingenic,x1000-uart".
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
- clocks : phandles to the module & baud clocks.
diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 000000000000..3d2fb1a7ba94
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- interrupt-names: should be "rx", "tx".
+- clocks: phandle to the input clock.
+
+Optional properties:
+- auto-flow-control: flow control enable.
+
+Example:
+ usio1: usio_uart@1e700010 {
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ auto-flow-control;
+ };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
new file mode 100644
index 000000000000..085a8591accd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
@@ -0,0 +1,35 @@
+NVIDIA Tegra Combined UART (TCU)
+
+The TCU is a system for sharing a hardware UART instance among multiple
+systems within the Tegra SoC. It is implemented through a mailbox-
+based protocol where each "virtual UART" has a pair of mailboxes, one
+for transmitting and one for receiving, that is used to communicate
+with the hardware implementing the TCU.
+
+Required properties:
+- name : Should be tcu
+- compatible
+ Array of strings
+ One of:
+ - "nvidia,tegra194-tcu"
+- mbox-names:
+ "rx" - Mailbox for receiving data from hardware UART
+ "tx" - Mailbox for transmitting data to hardware UART
+- mboxes: Mailboxes corresponding to the mbox-names.
+
+This node is a mailbox consumer. See the following files for details of
+the mailbox subsystem, and the specifiers implemented by the relevant
+provider(s):
+
+- .../mailbox/mailbox.txt
+- .../mailbox/nvidia,tegra186-hsp.txt
+
+Example bindings:
+-----------------
+
+tcu: tcu {
+ compatible = "nvidia,tegra194-tcu";
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+ <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+ mbox-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index c35d5ece1156..0a9b5444f4e6 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -22,6 +22,8 @@ Optional properties:
- dma-names : "rx" for receive channel, "tx" for transmit channel.
- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
- rs485-rts-active-high: drive RTS high when sending (default is low).
+- clocks: phandle to the functional clock as per
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
Example:
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
deleted file mode 100644
index 77863aefe9ef..000000000000
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* ARM AMBA Primecell PL011 serial UART
-
-Required properties:
-- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
-- reg: exactly one register range with length 0x1000
-- interrupts: exactly one interrupt specifier
-
-Optional properties:
-- pinctrl:
- When present, must have one state named "default",
- and may contain a second name named "sleep". The former
- state sets up pins for ordinary operation whereas
- the latter state will put the associated pins to sleep
- when the UART is unused
-- clocks:
- When present, the first clock listed must correspond to
- the clock named UARTCLK on the IP block, i.e. the clock
- to the external serial line, whereas the second clock
- must correspond to the PCLK clocking the internal logic
- of the block. Just listing one clock (the first one) is
- deprecated.
-- clock-names:
- When present, the first clock listed must be named
- "uartclk" and the second clock listed must be named
- "apb_pclk"
-- dmas:
- When present, may have one or two dma channels.
- The first one must be named "rx", the second one
- must be named "tx".
-- auto-poll:
- Enables polling when using RX DMA.
-- poll-rate-ms:
- Rate at which poll occurs when auto-poll is set,
- default 100ms.
-- poll-timeout-ms:
- Poll timeout when auto-poll is set, default
- 3000ms.
-
-See also bindings/arm/primecell.txt
-
-Example:
-
-uart@80120000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x80120000 0x1000>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
- dma-names = "rx", "tx";
- clocks = <&foo_clk>, <&bar_clk>;
- clock-names = "uartclk", "apb_pclk";
-};
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
new file mode 100644
index 000000000000..1a64d59152aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/pl011.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell PL011 serial UART
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl011
+ - zte,zx296702-uart
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,pl011
+ - const: arm,primecell
+ - items:
+ - const: zte,zx296702-uart
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ description:
+ When present, must have one state named "default",
+ and may contain a second name named "sleep". The former
+ state sets up pins for ordinary operation whereas
+ the latter state will put the associated pins to sleep
+ when the UART is unused
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ clocks:
+ description:
+ When present, the first clock listed must correspond to
+ the clock named UARTCLK on the IP block, i.e. the clock
+ to the external serial line, whereas the second clock
+ must correspond to the PCLK clocking the internal logic
+ of the block. Just listing one clock (the first one) is
+ deprecated.
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: uartclk
+ - const: apb_pclk
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ items:
+ - const: rx
+ - const: tx
+
+ auto-poll:
+ description:
+ Enables polling when using RX DMA.
+ type: boolean
+
+ poll-rate-ms:
+ description:
+ Rate at which poll occurs when auto-poll is set.
+ default 100ms.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 100
+
+ poll-timeout-ms:
+ description:
+ Poll timeout when auto-poll is set, default
+ 3000ms.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 3000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+dependencies:
+ poll-rate-ms: [ auto-poll ]
+ poll-timeout-ms: [ auto-poll ]
+
+additionalProperties: false
+
+examples:
+ - |
+ serial@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 4>;
+ dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+ dma-names = "rx", "tx";
+ clocks = <&foo_clk>, <&bar_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt b/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
deleted file mode 100644
index 8b9e0d4dc2e4..000000000000
--- a/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Renesas RZ/N1 UART
-
-This controller is based on the Synopsys DesignWare ABP UART and inherits all
-properties defined in snps-dw-apb-uart.txt except for the compatible property.
-
-Required properties:
-- compatible : The device specific string followed by the generic RZ/N1 string.
- Therefore it must be one of:
- "renesas,r9a06g032-uart", "renesas,rzn1-uart"
- "renesas,r9a06g033-uart", "renesas,rzn1-uart"
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 20232ad05d89..dd63151dc8b6 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -29,7 +29,9 @@ Required properties:
- "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
- "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
+ - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
+ - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
- "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
deleted file mode 100644
index 12bbe9f22560..000000000000
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Synopsys DesignWare ABP UART
-
-Required properties:
-- compatible : "snps,dw-apb-uart"
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-
-Clock handling:
-The clock rate of the input clock needs to be supplied by one of
-- clock-frequency : the input clock frequency for the UART.
-- clocks : phandle to the input clock
-
-The supplying peripheral clock can also be handled, needing a second property
-- clock-names: tuple listing input clock names.
- Required elements: "baudclk", "apb_pclk"
-
-Optional properties:
-- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE
- configuration parameter. Define this if your UART does not implement the busy
- functionality.
-- resets : phandle to the parent reset controller.
-- reg-shift : quantity to shift the register offsets by. If this property is
- not present then the register offsets are not shifted.
-- reg-io-width : the size (in bytes) of the IO accesses that should be
- performed on the device. If this property is not present then single byte
- accesses are used.
-- dcd-override : Override the DCD modem status signal. This signal will always
- be reported as active instead of being obtained from the modem status
- register. Define this if your serial port does not use this pin.
-- dsr-override : Override the DTS modem status signal. This signal will always
- be reported as active instead of being obtained from the modem status
- register. Define this if your serial port does not use this pin.
-- cts-override : Override the CTS modem status signal. This signal will always
- be reported as active instead of being obtained from the modem status
- register. Define this if your serial port does not use this pin.
-- ri-override : Override the RI modem status signal. This signal will always be
- reported as inactive instead of being obtained from the modem status register.
- Define this if your serial port does not use this pin.
-
-Example:
-
- uart@80230000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x80230000 0x100>;
- clock-frequency = <3686400>;
- interrupts = <10>;
- reg-shift = <2>;
- reg-io-width = <4>;
- dcd-override;
- dsr-override;
- cts-override;
- ri-override;
- };
-
-Example with one clock:
-
- uart@80230000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x80230000 0x100>;
- clocks = <&baudclk>;
- interrupts = <10>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
-
-Example with two clocks:
-
- uart@80230000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x80230000 0x100>;
- clocks = <&baudclk>, <&apb_pclk>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <10>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
new file mode 100644
index 000000000000..b42002542690
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare ABP UART
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a06g032-uart
+ - renesas,r9a06g033-uart
+ - const: renesas,rzn1-uart
+ - items:
+ - enum:
+ - rockchip,px30-uart
+ - rockchip,rk3036-uart
+ - rockchip,rk3066-uart
+ - rockchip,rk3188-uart
+ - rockchip,rk3288-uart
+ - rockchip,rk3328-uart
+ - rockchip,rk3368-uart
+ - rockchip,rk3399-uart
+ - rockchip,rv1108-uart
+ - const: snps,dw-apb-uart
+ - items:
+ - enum:
+ - brcm,bcm11351-dw-apb-uart
+ - brcm,bcm21664-dw-apb-uart
+ - const: snps,dw-apb-uart
+ - const: snps,dw-apb-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency: true
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: baudclk
+ - const: apb_pclk
+
+ snps,uart-16550-compatible:
+ description: reflects the value of UART_16550_COMPATIBLE configuration
+ parameter. Define this if your UART does not implement the busy functionality.
+ type: boolean
+
+ resets:
+ maxItems: 1
+
+ reg-shift: true
+
+ reg-io-width: true
+
+ dcd-override:
+ description: Override the DCD modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ dsr-override:
+ description: Override the DTS modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ cts-override:
+ description: Override the CTS modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ ri-override:
+ description: Override the RI modem status signal. This signal will always
+ be reported as inactive instead of being obtained from the modem status
+ register. Define this if your serial port does not use this pin.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clock-frequency = <3686400>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
+ };
+
+ - |
+ // Example with one clock:
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ - |
+ // Example with two clocks:
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>, <&apb_pclk>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
index 205a54bcd7c7..6bf6b43f8dd8 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
+++ b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
@@ -9,6 +9,8 @@ Required properties:
"amlogic,meson-gx-clk-measure" for GX SoCs
"amlogic,meson8-clk-measure" for Meson8 SoCs
"amlogic,meson8b-clk-measure" for Meson8b SoCs
+ "amlogic,meson-axg-clk-measure" for AXG SoCs
+ "amlogic,meson-g12a-clk-measure" for G12a SoCs
- reg: base address and size of the Clock Measurer register space.
Example:
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
new file mode 100644
index 000000000000..3b7d32956391
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
@@ -0,0 +1,46 @@
+BCM2835 PM (Power domains, watchdog)
+
+The PM block controls power domains and some reset lines, and includes
+a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt
+binding which covered some of PM's register range and functionality.
+
+Required properties:
+
+- compatible: Should be "brcm,bcm2835-pm"
+- reg: Specifies base physical address and size of the two
+ register ranges ("PM" and "ASYNC_BRIDGE" in that
+ order)
+- clocks: a) v3d: The V3D clock from CPRMAN
+ b) peri_image: The PERI_IMAGE clock from CPRMAN
+ c) h264: The H264 clock from CPRMAN
+ d) isp: The ISP clock from CPRMAN
+- #reset-cells: Should be 1. This property follows the reset controller
+ bindings[1].
+- #power-domain-cells: Should be 1. This property follows the power domain
+ bindings[2].
+
+Optional properties:
+
+- timeout-sec: Contains the watchdog timeout in seconds
+- system-power-controller: Whether the watchdog is controlling the
+ system power. This node follows the power controller bindings[3].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/power/power-controller.txt
+
+Example:
+
+pm {
+ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x7e100000 0x114>,
+ <0x7e00a000 0x24>;
+ clocks = <&clocks BCM2835_CLOCK_V3D>,
+ <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+ <&clocks BCM2835_CLOCK_H264>,
+ <&clocks BCM2835_CLOCK_ISP>;
+ clock-names = "v3d", "peri_image", "h264", "isp";
+ system-power-controller;
+};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
index ec95705ba692..f3fa313963d5 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
@@ -23,6 +23,7 @@ resources.
"qcom,rpm-msm8916"
"qcom,rpm-msm8974"
"qcom,rpm-msm8998"
+ "qcom,rpm-sdm660"
"qcom,rpm-qcs404"
- qcom,smd-channels:
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
index e79aeef73f28..9225472c80b4 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1977.txt
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt
@@ -17,12 +17,18 @@ Required properties:
Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
- - reset-gpio: the reset pin for the chip, for more details consult
+ - reset-gpios: the reset pin for the chip, for more details consult
Documentation/devicetree/bindings/gpio/gpio.txt
- DVDD-supply: supply voltage for the digital core, please consult
Documentation/devicetree/bindings/regulator/regulator.txt
+- adi,micbias: configures the voltage setting for the MICBIAS pin.
+ Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage
+ 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V
+ If not specified the default value will be "7" meaning 8.5 Volts.
+ This property is only valid for the ADAU1977
+
For required properties on SPI, please consult
Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -40,7 +46,8 @@ Examples:
AVDD-supply = <&regulator>;
DVDD-supply = <&regulator_digital>;
- reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+ adi,micbias = <3>;
+ reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
adau1977_i2c: adau1977@11 {
@@ -50,5 +57,5 @@ Examples:
AVDD-supply = <&regulator>;
DVDD-supply = <&regulator_digital>;
- reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt
index 7839be78448d..e5820235e0d5 100644
--- a/Documentation/devicetree/bindings/sound/ak4458.txt
+++ b/Documentation/devicetree/bindings/sound/ak4458.txt
@@ -4,7 +4,7 @@ This device supports I2C mode.
Required properties:
-- compatible : "asahi-kasei,ak4458"
+- compatible : "asahi-kasei,ak4458" or "asahi-kasei,ak4497"
- reg : The I2C address of the device for I2C
Optional properties:
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
deleted file mode 100644
index 62d42768a00b..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
+++ /dev/null
@@ -1,123 +0,0 @@
-Audio-Graph-SCU-Card:
-
-Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM".
-
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio-Graph-SCU-Card property is same as
-Simple-Card / Simple-SCU-Card / Audio-Graph-Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
- ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt
- ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt
-
-Below are same as Simple-Card / Audio-Graph-Card.
-
-- label
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Below are same as Simple-SCU-Card.
-
-- convert-rate
-- convert-channels
-- prefix
-- routing
-
-Required properties:
-
-- compatible : "audio-graph-scu-card";
-- dais : list of CPU DAI port{s}
-
-Example 1. Sampling Rate Conversion
-
- sound_card {
- compatible = "audio-graph-scu-card";
-
- label = "sound-card";
- prefix = "codec";
- routing = "codec Playback", "DAI0 Playback",
- "DAI0 Capture", "codec Capture";
- convert-rate = <48000>;
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
-
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
-Example 2. 2 CPU 1 Codec (Mixing)
-
- sound_card {
- compatible = "audio-graph-scu-card";
-
- label = "sound-card";
- routing = "codec Playback", "DAI0 Playback",
- "codec Playback", "DAI1 Playback",
- "DAI0 Capture", "codec Capture";
-
- dais = <&cpu_port0
- &cpu_port1>;
- };
-
- audio-codec {
- ...
-
- audio-graph-card,prefix = "codec";
- audio-graph-card,convert-rate = <48000>;
- port {
- codec_endpoint0: endpoint {
- remote-endpoint = <&cpu_endpoint0>;
- };
- codec_endpoint1: endpoint {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- dai-controller {
- ...
- ports {
- cpu_port0: port {
- cpu_endpoint0: endpoint {
- remote-endpoint = <&codec_endpoint0>;
-
- dai-format = "left_j";
- ...
- };
- };
- cpu_port1: port {
- cpu_endpoint1: endpoint {
- remote-endpoint = <&codec_endpoint1>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/sound/cs35l36.txt b/Documentation/devicetree/bindings/sound/cs35l36.txt
new file mode 100644
index 000000000000..912bd162b477
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l36.txt
@@ -0,0 +1,168 @@
+CS35L36 Speaker Amplifier
+
+Required properties:
+
+ - compatible : "cirrus,cs35l36"
+
+ - reg : the I2C address of the device for I2C
+
+ - VA-supply, VP-supply : power supplies for the device,
+ as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ - cirrus,boost-ctl-millivolt : Boost Voltage Value. Configures the boost
+ converter's output voltage in mV. The range is from 2550mV to 12000mV with
+ increments of 50mV.
+ (Default) VP
+
+ - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA.
+ Configures the peak current by monitoring the current through the boost FET.
+ Range starts at 1600mA and goes to a maximum of 4500mA with increments of
+ 50mA.
+ (Default) 4.50 Amps
+
+ - cirrus,boost-ind-nanohenry : Inductor estimation LBST reference value.
+ Seeds the digital boost converter's inductor estimation block with the initial
+ inductance value to reference.
+
+ 1000 = 1uH (Default)
+ 1200 = 1.2uH
+
+Optional properties:
+ - cirrus,multi-amp-mode : Boolean to determine if there are more than
+ one amplifier in the system. If more than one it is best to Hi-Z the ASP
+ port to prevent bus contention on the output signal
+
+ - cirrus,boost-ctl-select : Boost conerter control source selection.
+ Selects the source of the BST_CTL target VBST voltage for the boost
+ converter to generate.
+ 0x00 - Control Port Value
+ 0x01 - Class H Tracking (Default)
+ 0x10 - MultiDevice Sync Value
+
+ - cirrus,amp-pcm-inv : Boolean to determine Amplifier will invert incoming
+ PCM data
+
+ - cirrus,imon-pol-inv : Boolean to determine Amplifier will invert the
+ polarity of outbound IMON feedback data
+
+ - cirrus,vmon-pol-inv : Boolean to determine Amplifier will invert the
+ polarity of outbound VMON feedback data
+
+ - cirrus,dcm-mode-enable : Boost converter automatic DCM Mode enable.
+ This enables the digital boost converter to operate in a low power
+ (Discontinuous Conduction) mode during low loading conditions.
+
+ - cirrus,weak-fet-disable : Boolean : The strength of the output drivers is
+ reduced when operating in a Weak-FET Drive Mode and must not be used to drive
+ a large load.
+
+ - cirrus,classh-wk-fet-delay : Weak-FET entry delay. Controls the delay
+ (in ms) before the Class H algorithm switches to the weak-FET voltage
+ (after the audio falls and remains below the value specified in WKFET_AMP_THLD).
+
+ 0 = 0ms
+ 1 = 5ms
+ 2 = 10ms
+ 3 = 50ms
+ 4 = 100ms (Default)
+ 5 = 200ms
+ 6 = 500ms
+ 7 = 1000ms
+
+ - cirrus,classh-weak-fet-thld-millivolt : Weak-FET amplifier drive threshold.
+ Configures the signal threshold at which the PWM output stage enters
+ weak-FET operation. The range is 50mV to 700mV in 50mV increments.
+
+ - cirrus,temp-warn-threshold : Amplifier overtemperature warning threshold.
+ Configures the threshold at which the overtemperature warning condition occurs.
+ When the threshold is met, the overtemperature warning attenuation is applied
+ and the TEMP_WARN_EINT interrupt status bit is set.
+ If TEMP_WARN_MASK = 0, INTb is asserted.
+
+ 0 = 105C
+ 1 = 115C
+ 2 = 125C (Default)
+ 3 = 135C
+
+ - cirrus,irq-drive-select : Selects the driver type of the selected interrupt
+ output.
+
+ 0 = Open-drain
+ 1 = Push-pull (Default)
+
+ - cirrus,irq-gpio-select : Selects the pin to serve as the programmable
+ interrupt output.
+
+ 0 = PDM_DATA / SWIRE_SD / INT (Default)
+ 1 = GPIO
+
+Optional properties for the "cirrus,vpbr-config" Sub-node
+
+ - cirrus,vpbr-en : VBST brownout prevention enable. Configures whether the
+ VBST brownout prevention algorithm is enabled or disabled.
+
+ 0 = VBST brownout prevention disabled (default)
+ 1 = VBST brownout prevention enabled
+
+ See Section 7.31.1 VPBR Config for configuration options & further details
+
+ - cirrus,vpbr-thld : Initial VPBR threshold. Configures the VP brownout
+ threshold voltage
+
+ - cirrus,cirrus,vpbr-atk-rate : Attenuation attack step rate. Configures the
+ amount delay between consecutive volume attenuation steps when a brownout
+ condition is present and the VP brownout condition is in an attacking state.
+
+ - cirrus,vpbr-atk-vol : VP brownout prevention step size. Configures the VP
+ brownout prevention attacking attenuation step size when operating in either
+ digital volume or analog gain modes.
+
+ - cirrus,vpbr-max-attn : Maximum attenuation that the VP brownout prevention
+ can apply to the audio signal.
+
+ - cirrus,vpbr-wait : Configures the delay time between a brownout condition
+ no longer being present and the VP brownout prevention entering an attenuation
+ release state.
+
+ - cirrus,vpbr-rel-rate : Attenuation release step rate. Configures the delay
+ between consecutive volume attenuation release steps when a brownout condition
+ is not longer present and the VP brownout is in an attenuation release state.
+
+ - cirrus,vpbr-mute-en : During the attack state, if the vpbr-max-attn value
+ is reached, the error condition still remains, and this bit is set, the audio
+ is muted.
+
+Example:
+
+cs35l36: cs35l36@40 {
+ compatible = "cirrus,cs35l36";
+ reg = <0x40>;
+ VA-supply = <&dummy_vreg>;
+ VP-supply = <&dummy_vreg>;
+ reset-gpios = <&gpio0 54 0>;
+ interrupt-parent = <&gpio8>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-ctl-millivolt = <10000>;
+ cirrus,boost-peak-milliamp = <4500>;
+ cirrus,boost-ctl-select = <0x00>;
+ cirrus,weak-fet-delay = <0x04>;
+ cirrus,weak-fet-thld = <0x01>;
+ cirrus,temp-warn-threshold = <0x01>;
+ cirrus,multi-amp-mode;
+ cirrus,irq-drive-select = <0x01>;
+ cirrus,irq-gpio-select = <0x01>;
+
+ cirrus,vpbr-config {
+ cirrus,vpbr-en = <0x00>;
+ cirrus,vpbr-thld = <0x05>;
+ cirrus,vpbr-atk-rate = <0x02>;
+ cirrus,vpbr-atk-vol = <0x01>;
+ cirrus,vpbr-max-attn = <0x09>;
+ cirrus,vpbr-wait = <0x01>;
+ cirrus,vpbr-rel-rate = <0x05>;
+ cirrus,vpbr-mute-en = <0x00>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4341.txt b/Documentation/devicetree/bindings/sound/cs4341.txt
new file mode 100644
index 000000000000..12b4aa8ef0db
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4341.txt
@@ -0,0 +1,22 @@
+Cirrus Logic CS4341 audio DAC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+ - compatible: "cirrus,cs4341a"
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+For required properties on I2C-bus, please consult
+Documentation/devicetree/bindings/i2c/i2c.txt
+For required properties on SPI-bus, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+ codec: cs4341@0 {
+ #sound-dai-cells = <0>;
+ compatible = "cirrus,cs4341a";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
index b279b6072bd5..a58f79f5345c 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -45,6 +45,23 @@ Optional properties:
- fck_parent : Should contain a valid clock name which will be used as parent
for the McASP fck
+Optional GPIO support:
+If any McASP pin need to be used as GPIO then the McASP node must have:
+...
+ gpio-controller
+ #gpio-cells = <2>;
+...
+
+When requesting a GPIO, the first parameter is the PIN index in McASP_P*
+registers.
+For example to request the AXR2 pin of mcasp8:
+function-gpios = <&mcasp8 2 0>;
+
+Or to request the ACLKR pin of mcasp8:
+function-gpios = <&mcasp8 29 0>;
+
+For generic gpio information, please refer to bindings/gpio/gpio.txt
+
Example:
mcasp0: mcasp0@1d00000 {
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.txt b/Documentation/devicetree/bindings/sound/fsl,micfil.txt
new file mode 100644
index 000000000000..53e227b15277
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,micfil.txt
@@ -0,0 +1,32 @@
+NXP MICFIL Digital Audio Interface (MICFIL).
+
+The MICFIL digital interface provides a 16-bit audio signal from a PDM
+microphone bitstream in a configurable output sampling rate.
+
+Required properties:
+
+ - compatible : Compatible list, contains "fsl,imx8mm-micfil"
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the micfil interrupts.
+
+ - clocks : Must contain an entry for each entry in clock-names.
+
+ - clock-names : Must include the "ipg_clk" for register access and
+ "ipg_clk_app" for internal micfil clock.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+Example:
+micfil: micfil@30080000 {
+ compatible = "fsl,imx8mm-micfil";
+ reg = <0x0 0x30080000 0x0 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+ <&clk IMX8MM_CLK_PDM_ROOT>;
+ clock-names = "ipg_clk", "ipg_clk_app";
+ dmas = <&sdma2 24 26 0x80000000>;
+};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
new file mode 100644
index 000000000000..1084f7f22eea
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
@@ -0,0 +1,26 @@
+* Audio codec controlled by ChromeOS EC
+
+Google's ChromeOS EC codec is a digital mic codec provided by the
+Embedded Controller (EC) and is controlled via a host-command interface.
+
+An EC codec node should only be found as a sub-node of the EC node (see
+Documentation/devicetree/bindings/mfd/cros-ec.txt).
+
+Required properties:
+- compatible: Must contain "google,cros-ec-codec"
+- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.
+- max-dmic-gain: A number for maximum gain in dB on digital microphone.
+
+Example:
+
+cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+
+ ...
+
+ cros_ec_codec: ec-codec {
+ compatible = "google,cros-ec-codec";
+ #sound-dai-cells = <1>;
+ max-dmic-gain = <43>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt
new file mode 100644
index 000000000000..05adc0d47b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt
@@ -0,0 +1,20 @@
+Ingenic JZ4725B codec controller
+
+Required properties:
+- compatible : "ingenic,jz4725b-codec"
+- reg : codec registers location and length
+- clocks : phandle to the AIC clock.
+- clock-names: must be set to "aic".
+- #sound-dai-cells: Must be set to 0.
+
+Example:
+
+codec: audio-codec@100200a4 {
+ compatible = "ingenic,jz4725b-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>;
+ clock-names = "aic";
+};
diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt
new file mode 100644
index 000000000000..1ffcade87e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt
@@ -0,0 +1,20 @@
+Ingenic JZ4740 codec controller
+
+Required properties:
+- compatible : "ingenic,jz4740-codec"
+- reg : codec registers location and length
+- clocks : phandle to the AIC clock.
+- clock-names: must be set to "aic".
+- #sound-dai-cells: Must be set to 0.
+
+Example:
+
+codec: audio-codec@10020080 {
+ compatible = "ingenic,jz4740-codec";
+ reg = <0x10020080 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4740_CLK_AIC>;
+ clock-names = "aic";
+};
diff --git a/Documentation/devicetree/bindings/sound/mt6358.txt b/Documentation/devicetree/bindings/sound/mt6358.txt
new file mode 100644
index 000000000000..5465730013a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6358.txt
@@ -0,0 +1,18 @@
+Mediatek MT6358 Audio Codec
+
+The communication between MT6358 and SoC is through Mediatek PMIC wrapper.
+For more detail, please visit Mediatek PMIC wrapper documentation.
+
+Must be a child node of PMIC wrapper.
+
+Required properties:
+
+- compatible : "mediatek,mt6358-sound".
+- Avdd-supply : power source of AVDD
+
+Example:
+
+mt6358_snd {
+ compatible = "mediatek,mt6358-sound";
+ Avdd-supply = <&mt6358_vaud28_reg>;
+};
diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt
new file mode 100644
index 000000000000..396ba38619f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt
@@ -0,0 +1,36 @@
+Mediatek AFE PCM controller for mt8183
+
+Required properties:
+- compatible = "mediatek,mt68183-audio";
+- reg: register location and size
+- interrupts: should contain AFE interrupt
+- power-domains: should define the power domain
+- clocks: Must contain an entry for each entry in clock-names
+- clock-names: should have these clock names:
+ "infra_sys_audio_clk",
+ "mtkaif_26m_clk",
+ "top_mux_audio",
+ "top_mux_aud_intbus",
+ "top_sys_pll3_d4",
+ "top_clk26m_clk";
+
+Example:
+
+ afe: mt8183-afe-pcm@11220000 {
+ compatible = "mediatek,mt8183-audio";
+ reg = <0 0x11220000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>;
+ clocks = <&infrasys CLK_INFRA_AUDIO>,
+ <&infrasys CLK_INFRA_AUDIO_26M_BCLK>,
+ <&topckgen CLK_TOP_MUX_AUDIO>,
+ <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+ <&topckgen CLK_TOP_SYSPLL_D2_D4>,
+ <&clk26m>;
+ clock-names = "infra_sys_audio_clk",
+ "mtkaif_26m_clk",
+ "top_mux_audio",
+ "top_mux_aud_intbus",
+ "top_sys_pll_d2_d4",
+ "top_clk26m_clk";
+ };
diff --git a/Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt b/Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt
new file mode 100644
index 000000000000..679e44839b48
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt
@@ -0,0 +1,24 @@
+Mediatek ALSA BT SCO CVSD/MSBC Driver
+
+Required properties:
+- compatible = "mediatek,mtk-btcvsd-snd";
+- reg: register location and size of PKV and SRAM_BANK2
+- interrupts: should contain BTSCO interrupt
+- mediatek,infracfg: the phandles of INFRASYS
+- mediatek,offset: Array contains of register offset and mask
+ infra_misc_offset,
+ infra_conn_bt_cvsd_mask,
+ cvsd_mcu_read_offset,
+ cvsd_mcu_write_offset,
+ cvsd_packet_indicator_offset
+
+Example:
+
+ mtk-btcvsd-snd@18000000 {
+ compatible = "mediatek,mtk-btcvsd-snd";
+ reg=<0 0x18000000 0 0x1000>,
+ <0 0x18080000 0 0x8000>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,infracfg = <&infrasys>;
+ mediatek,offset = <0xf00 0x800 0xfd0 0xfd4 0xfd8>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
index 44d27456e8a4..21cd310963b1 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
@@ -13,6 +13,10 @@ Required properties:
See ../reset/reset.txt for details.
- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
+Optional properties:
+- nvidia,model : The user-visible name of this sound complex. Since the property
+ is optional, legacy boards can use default name provided in hda driver.
+
Example:
hda@70030000 {
@@ -27,4 +31,5 @@ hda@70030000 {
<&tegra_car 128>, /* hda2hdmi */
<&tegra_car 111>; /* hda2codec_2x */
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ nvidia,model = "jetson-tk1-hda";
};
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
index fdcea3d12ee5..e7d17dda55db 100644
--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@@ -30,6 +30,7 @@ Required properties
- vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
- vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
- vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
+
Optional Properties:
- qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons
detection on headset when the mbhc is powered up
@@ -92,9 +93,9 @@ spmi_bus {
"cdc_ear_cnp_int",
"cdc_hphr_cnp_int",
"cdc_hphl_cnp_int";
- VDD-CDC-IO-supply = <&pm8916_l5>;
- VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
- VDD-MICBIAS-supply = <&pm8916_l13>;
+ vdd-cdc-io-supply = <&pm8916_l5>;
+ vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+ vdd-micbias-supply = <&pm8916_l13>;
#sound-dai-cells = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 1d8d49e30af7..5d6ea66a863f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -34,12 +34,12 @@ Required properties with SLIMbus Interface:
Definition: Interrupt names of WCD INTR1 and INTR2
Should be: "intr1", "intr2"
-- reset-gpio:
+- reset-gpios:
Usage: required
Value type: <String Array>
Definition: Reset gpio line
-- qcom,ifd:
+- slim-ifc-dev:
Usage: required
Value type: <phandle>
Definition: SLIM interface device
@@ -104,13 +104,13 @@ Required properties with SLIMbus Interface:
Value type: <u32>
Definition: Must be 1
-codec@1{
+audio-codec@1{
compatible = "slim217,1a0";
reg = <1 0>;
interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr2"
- reset-gpio = <&msmgpio 64 0>;
- qcom,ifd = <&wc9335_ifd>;
+ reset-gpios = <&msmgpio 64 0>;
+ slim-ifc-dev = <&wc9335_ifd>;
clock-names = "mclk", "native";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
<&rpmcc RPM_SMD_BB_CLK1>;
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
new file mode 100644
index 000000000000..2469588c7ccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
@@ -0,0 +1,23 @@
+* Rockchip Rk3328 internal codec
+
+Required properties:
+
+- compatible: "rockchip,rk3328-codec"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- rockchip,grf: the phandle of the syscon node for GRF register.
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should be "pclk".
+- spk-depop-time-ms: speak depop time msec.
+
+Example for rk3328 internal codec:
+
+codec: codec@ff410000 {
+ compatible = "rockchip,rk3328-codec";
+ reg = <0x0 0xff410000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ clocks = <&cru PCLK_ACODEC>;
+ clock-names = "pclk";
+ spk-depop-time-ms = 100;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
index 9c58f724396a..9d9ff5184939 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V
2 = 3.33 mA 5.74 mA 8.03 mA
3 = 4.99 mA 8.61 mA 12.05 mA
+- sclk-strength: the SCLK pad strength. Possible values are:
+0, 1, 2 and 3 as per the table below:
+
+VDDIO 1.8V 2.5V 3.3V
+0 = Disable
+1 = 1.66 mA 2.87 mA 4.02 mA
+2 = 3.33 mA 5.74 mA 8.03 mA
+3 = 4.99 mA 8.61 mA 12.05 mA
+
Example:
sgtl5000: codec@a {
diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
deleted file mode 100644
index 3a2f71616cda..000000000000
--- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-ASoC Simple SCU Sound Card
-
-Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM".
-For example, you can use this driver if you want to exchange sampling rate convert,
-Mixing, etc...
-
-Required properties:
-
-- compatible : "simple-scu-audio-card"
- "renesas,rsrc-card"
-Optional properties:
-
-- simple-audio-card,name : see simple-audio-card.txt
-- simple-audio-card,cpu : see simple-audio-card.txt
-- simple-audio-card,codec : see simple-audio-card.txt
-
-Optional subnode properties:
-
-- simple-audio-card,format : see simple-audio-card.txt
-- simple-audio-card,frame-master : see simple-audio-card.txt
-- simple-audio-card,bitclock-master : see simple-audio-card.txt
-- simple-audio-card,bitclock-inversion : see simple-audio-card.txt
-- simple-audio-card,frame-inversion : see simple-audio-card.txt
-- simple-audio-card,convert-rate : platform specified sampling rate convert
-- simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch)
-- simple-audio-card,prefix : see routing
-- simple-audio-card,widgets : Please refer to widgets.txt.
-- simple-audio-card,routing : A list of the connections between audio components.
- Each entry is a pair of strings, the first being the connection's sink,
- the second being the connection's source. Valid names for sources.
- use audio-prefix if some components is using same sink/sources naming.
- it can be used if compatible was "renesas,rsrc-card";
-
-Required CPU/CODEC subnodes properties:
-
-- sound-dai : see simple-audio-card.txt
-
-Optional CPU/CODEC subnodes properties:
-
-- clocks / system-clock-frequency : see simple-audio-card.txt
-
-Example 1. Sampling Rate Conversion
-
-sound {
- compatible = "simple-scu-audio-card";
-
- simple-audio-card,name = "rsnd-ak4643";
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- simple-audio-card,convert-rate = <48000>;
-
- simple-audio-card,prefix = "ak4642";
- simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
- "DAI0 Capture", "ak4642 Capture";
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4643>;
- system-clock-frequency = <11289600>;
- };
-};
-
-Example 2. 2 CPU 1 Codec (Mixing)
-
-sound {
- compatible = "simple-scu-audio-card";
-
- simple-audio-card,name = "rsnd-ak4643";
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&dpcmcpu>;
- simple-audio-card,frame-master = <&dpcmcpu>;
-
- simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
- "ak4642 Playback", "DAI1 Playback";
-
- dpcmcpu: cpu@0 {
- sound-dai = <&rcar_sound 0>;
- };
-
- cpu@1 {
- sound-dai = <&rcar_sound 1>;
- };
-
- codec {
- prefix = "ak4642";
- sound-dai = <&ak4643>;
- clocks = <&audio_clock>;
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/sprd-pcm.txt b/Documentation/devicetree/bindings/sound/sprd-pcm.txt
new file mode 100644
index 000000000000..4b23e84b2e57
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sprd-pcm.txt
@@ -0,0 +1,23 @@
+* Spreadtrum DMA platfrom bindings
+
+Required properties:
+- compatible: Should be "sprd,pcm-platform".
+- dmas: Specify the list of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+ These strings correspond 1:1 with the ordered pairs in dmas.
+
+Example:
+
+ audio_platform:platform@0 {
+ compatible = "sprd,pcm-platform";
+ dmas = <&agcp_dma 1 1>, <&agcp_dma 2 2>,
+ <&agcp_dma 3 3>, <&agcp_dma 4 4>,
+ <&agcp_dma 5 5>, <&agcp_dma 6 6>,
+ <&agcp_dma 7 7>, <&agcp_dma 8 8>,
+ <&agcp_dma 9 9>, <&agcp_dma 10 10>;
+ dma-names = "normal_p_l", "normal_p_r",
+ "normal_c_l", "normal_c_r",
+ "voice_c", "fast_p",
+ "loop_c", "loop_p",
+ "voip_c", "voip_p";
+ };
diff --git a/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
new file mode 100644
index 000000000000..cbc93c8f4963
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for Xilinx PL audio formatter
+
+The IP core supports DMA, data formatting(AES<->PCM conversion)
+of audio samples.
+
+Required properties:
+ - compatible: "xlnx,audio-formatter-1.0"
+ - interrupt-names: Names specified to list of interrupts in same
+ order mentioned under "interrupts".
+ List of supported interrupt names are:
+ "irq_mm2s" : interrupt from MM2S block
+ "irq_s2mm" : interrupt from S2MM block
+ - interrupts-parent: Phandle for interrupt controller.
+ - interrupts: List of Interrupt numbers.
+ - reg: Base address and size of the IP core instance.
+ - clock-names: List of input clocks.
+ Required elements: "s_axi_lite_aclk", "aud_mclk"
+ - clocks: Input clock specifier. Refer to common clock bindings.
+
+Example:
+ audio_ss_0_audio_formatter_0: audio_formatter@80010000 {
+ compatible = "xlnx,audio-formatter-1.0";
+ interrupt-names = "irq_mm2s", "irq_s2mm";
+ interrupt-parent = <&gic>;
+ interrupts = <0 104 4>, <0 105 4>;
+ reg = <0x0 0x80010000 0x0 0x1000>;
+ clock-names = "s_axi_lite_aclk", "aud_mclk";
+ clocks = <&clk 71>, <&clk_wiz_1 0>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/xlnx,spdif.txt b/Documentation/devicetree/bindings/sound/xlnx,spdif.txt
new file mode 100644
index 000000000000..15c2d64d247c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,spdif.txt
@@ -0,0 +1,28 @@
+Device-Tree bindings for Xilinx SPDIF IP
+
+The IP supports playback and capture of SPDIF audio
+
+Required properties:
+ - compatible: "xlnx,spdif-2.0"
+ - clock-names: List of input clocks.
+ Required elements: "s_axi_aclk", "aud_clk_i"
+ - clocks: Input clock specifier. Refer to common clock bindings.
+ - reg: Base address and address length of the IP core instance.
+ - interrupts-parent: Phandle for interrupt controller.
+ - interrupts: List of Interrupt numbers.
+ - xlnx,spdif-mode: 0 :- receiver mode
+ 1 :- transmitter mode
+ - xlnx,aud_clk_i: input audio clock value.
+
+Example:
+ spdif_0: spdif@80010000 {
+ clock-names = "aud_clk_i", "s_axi_aclk";
+ clocks = <&misc_clk_0>, <&clk 71>;
+ compatible = "xlnx,spdif-2.0";
+ interrupt-names = "spdif_interrupt";
+ interrupt-parent = <&gic>;
+ interrupts = <0 91 4>;
+ reg = <0x0 0x80010000 0x0 0x10000>;
+ xlnx,spdif-mode = <1>;
+ xlnx,aud_clk_i = <49152913>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
index b93c1e2f25dd..7c40ea694352 100644
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
@@ -1,14 +1,19 @@
* Atmel Quad Serial Peripheral Interface (QSPI)
Required properties:
-- compatible: Should be "atmel,sama5d2-qspi".
+- compatible: Should be one of the following:
+ - "atmel,sama5d2-qspi"
+ - "microchip,sam9x60-qspi"
- reg: Should contain the locations and lengths of the base registers
and the mapped memory.
- reg-names: Should contain the resource reg names:
- qspi_base: configuration register address space
- qspi_mmap: memory mapped address space
- interrupts: Should contain the interrupt for the device.
-- clocks: The phandle of the clock needed by the QSPI controller.
+- clocks: Should reference the peripheral clock and the QSPI system
+ clock if available.
+- clock-names: Should contain "pclk" for the peripheral clock and "qspick"
+ for the system clock when available.
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
@@ -19,7 +24,8 @@ spi@f0020000 {
reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+ clock-names = "pclk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index e3c48b20b1a6..2d3264140cc5 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,7 @@ Required properties:
- "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
- "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
- "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+ - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
- reg : Offset and length of the register set for the device
- interrupts : Should contain CSPI/eCSPI interrupt
- clocks : Clock specifiers for both ipg and per clocks.
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
index 483e9cfac1b1..e8f1d627d288 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
@@ -14,15 +14,13 @@ Required properties:
- clocks : The clocks needed by the QuadSPI controller
- clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
-Optional properties:
- - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
- Each bus can be connected with two NOR flashes.
- Most of the time, each bus only has one NOR flash
- connected, this is the default case.
- But if there are two NOR flashes connected to the
- bus, you should enable this property.
- (Please check the board's schematic.)
- - big-endian : That means the IP register is big endian
+Required SPI slave node properties:
+ - reg: There are two buses (A and B) with two chip selects each.
+ This encodes to which bus and CS the flash is connected:
+ <0>: Bus A, CS 0
+ <1>: Bus A, CS 1
+ <2>: Bus B, CS 0
+ <3>: Bus B, CS 1
Example:
@@ -40,7 +38,7 @@ qspi0: quadspi@40044000 {
};
};
-Example showing the usage of two SPI NOR devices:
+Example showing the usage of two SPI NOR devices on bus A:
&qspi2 {
pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
new file mode 100644
index 000000000000..2cd67eb727d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
@@ -0,0 +1,39 @@
+* NXP Flex Serial Peripheral Interface (FSPI)
+
+Required properties:
+ - compatible : Should be "nxp,lx2160a-fspi"
+ - reg : First contains the register location and length,
+ Second contains the memory mapping address and length
+ - reg-names : Should contain the resource reg names:
+ - fspi_base: configuration register address space
+ - fspi_mmap: memory mapped address space
+ - interrupts : Should contain the interrupt for the device
+
+Required SPI slave node properties:
+ - reg : There are two buses (A and B) with two chip selects each.
+ This encodes to which bus and CS the flash is connected:
+ - <0>: Bus A, CS 0
+ - <1>: Bus A, CS 1
+ - <2>: Bus B, CS 0
+ - <3>: Bus B, CS 1
+
+Example showing the usage of two SPI NOR slave devices on bus A:
+
+fspi0: spi@20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "fspi_en", "fspi";
+
+ mt35xu512aba0: flash@0 {
+ reg = <0>;
+ ....
+ };
+
+ mt35xu512aba1: flash@1 {
+ reg = <1>;
+ ....
+ };
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.txt b/Documentation/devicetree/bindings/spi/spi-sifive.txt
new file mode 100644
index 000000000000..3f5c6e438972
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.txt
@@ -0,0 +1,37 @@
+SiFive SPI controller Device Tree Bindings
+------------------------------------------
+
+Required properties:
+- compatible : Should be "sifive,<chip>-spi" and "sifive,spi<version>".
+ Supported compatible strings are:
+ "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated
+ onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive
+ SPI v0 IP block with no chip integration tweaks.
+ Please refer to sifive-blocks-ip-versioning.txt for details
+- reg : Physical base address and size of SPI registers map
+ A second (optional) range can indicate memory mapped flash
+- interrupts : Must contain one entry
+- interrupt-parent : Must be core interrupt controller
+- clocks : Must reference the frequency given to the controller
+- #address-cells : Must be '1', indicating which CS to use
+- #size-cells : Must be '0'
+
+Optional properties:
+- sifive,fifo-depth : Depth of hardware queues; defaults to 8
+- sifive,max-bits-per-word : Maximum bits per word; defaults to 8
+
+SPI RTL that corresponds to the IP block version numbers can be found here:
+https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
+
+Example:
+ spi: spi@10040000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
+ interrupt-parent = <&plic>;
+ interrupts = <51>;
+ clocks = <&tlclk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sifive,fifo-depth = <8>;
+ sifive,max-bits-per-word = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd.txt b/Documentation/devicetree/bindings/spi/spi-sprd.txt
index bad211a19da4..3c7eacce0ee3 100644
--- a/Documentation/devicetree/bindings/spi/spi-sprd.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sprd.txt
@@ -14,6 +14,11 @@ Required properties:
address on the SPI bus. Should be set to 1.
- #size-cells: Should be set to 0.
+Optional properties:
+dma-names: Should contain names of the SPI used DMA channel.
+dmas: Should contain DMA channels and DMA slave ids which the SPI used
+ sorted in the same order as the dma-names property.
+
Example:
spi0: spi@70a00000{
compatible = "sprd,sc9860-spi";
@@ -21,6 +26,8 @@ spi0: spi@70a00000{
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "spi", "source","enable";
clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+ dma-names = "rx_chn", "tx_chn";
+ dmas = <&apdma 11 11>, <&apdma 12 12>;
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt
index 1b3fa2c119d5..d82755c63eaf 100644
--- a/Documentation/devicetree/bindings/spi/spi-stm32.txt
+++ b/Documentation/devicetree/bindings/spi/spi-stm32.txt
@@ -7,7 +7,9 @@ from 4 to 32-bit data size. Although it can be configured as master or slave,
only master is supported by the driver.
Required properties:
-- compatible: Must be "st,stm32h7-spi".
+- compatible: Should be one of:
+ "st,stm32h7-spi"
+ "st,stm32f4-spi"
- reg: Offset and length of the device's register set.
- interrupts: Must contain the interrupt id.
- clocks: Must contain an entry for spiclk (which feeds the internal clock
@@ -30,8 +32,9 @@ Child nodes represent devices on the SPI bus
See ../spi/spi-bus.txt
Optional properties:
-- st,spi-midi-ns: (Master Inter-Data Idleness) minimum time delay in
- nanoseconds inserted between two consecutive data frames.
+- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
+ delay in nanoseconds inserted between two consecutive data
+ frames.
Example:
diff --git a/Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt b/Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt
new file mode 100644
index 000000000000..194f6a3c1c1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt
@@ -0,0 +1,24 @@
+Milbeaut SRAM for smp bringup
+
+Milbeaut SoCs use a part of the sram for the bringup of the secondary cores.
+Once they get powered up in the bootloader, they stay at the specific part
+of the sram.
+Therefore the part needs to be added as the sub-node of mmio-sram.
+
+Required sub-node properties:
+- compatible : should be "socionext,milbeaut-smp-sram"
+
+Example:
+
+ sram: sram@0 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x10000>;
+
+ smp-sram@f100 {
+ compatible = "socionext,milbeaut-smp-sram";
+ reg = <0xf100 0x20>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index ab5a70bb9a64..380246a805f2 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -63,6 +63,7 @@ The valid sections compatible for H5 are:
The valid sections compatible for H6 are:
- allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c
+ - allwinner,sun50i-h6-sram-c1, allwinner,sun4i-a10-sram-c1
The valid sections compatible for F1C100s are:
- allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d
diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
new file mode 100644
index 000000000000..3ab330219d45
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
@@ -0,0 +1,105 @@
+* Broadcom Stingray Thermal
+
+This binding describes thermal sensors that is part of Stingray SoCs.
+
+Required properties:
+- compatible : Must be "brcm,sr-thermal"
+- reg : Memory where tmon data will be available.
+- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
+ Each bit represents single TMON source.
+- #thermal-sensor-cells : Thermal sensor phandler
+- polling-delay: Max number of milliseconds to wait between polls.
+- thermal-sensors: A list of thermal sensor phandles and specifier.
+ specifier value is tmon ID and it should be
+ in correspond with brcm,tmon-mask.
+- temperature: trip temperature threshold in millicelsius.
+
+Example:
+ tmons {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x8f100000 0x100>;
+
+ tmon: tmon@0 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x0 0x40>;
+ brcm,tmon-mask = <0x3f>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ ihost0_thermal: ihost0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 0>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost1_thermal: ihost1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 1>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost2_thermal: ihost2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 2>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost3_thermal: ihost3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 3>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ crmu_thermal: crmu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 4>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ nitro_thermal: nitro-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 5>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 41d6a443ad66..f8d7831f3974 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -13,6 +13,7 @@ Required properties:
- "mediatek,mt2701-thermal" : For MT2701 family of SoCs
- "mediatek,mt2712-thermal" : For MT2712 family of SoCs
- "mediatek,mt7622-thermal" : For MT7622 SoC
+ - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
- reg: Address range of the thermal controller
- interrupts: IRQ for the thermal controller
- clocks, clock-names: Clocks needed for the thermal controller. required
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
index 9809b11f7180..5d8fd5b52598 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
@@ -2,17 +2,44 @@ Freescale i.MX General Purpose Timer (GPT)
Required properties:
-- compatible : should be "fsl,<soc>-gpt"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one per timer channel.
-- clocks : The clocks provided by the SoC to drive the timer.
+- compatible : should be one of following:
+ for i.MX1:
+ - "fsl,imx1-gpt";
+ for i.MX21:
+ - "fsl,imx21-gpt";
+ for i.MX27:
+ - "fsl,imx27-gpt", "fsl,imx21-gpt";
+ for i.MX31:
+ - "fsl,imx31-gpt";
+ for i.MX25:
+ - "fsl,imx25-gpt", "fsl,imx31-gpt";
+ for i.MX50:
+ - "fsl,imx50-gpt", "fsl,imx31-gpt";
+ for i.MX51:
+ - "fsl,imx51-gpt", "fsl,imx31-gpt";
+ for i.MX53:
+ - "fsl,imx53-gpt", "fsl,imx31-gpt";
+ for i.MX6Q:
+ - "fsl,imx6q-gpt", "fsl,imx31-gpt";
+ for i.MX6DL:
+ - "fsl,imx6dl-gpt";
+ for i.MX6SL:
+ - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
+ for i.MX6SX:
+ - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
+- reg : specifies base physical address and size of the registers.
+- interrupts : should be the gpt interrupt.
+- clocks : the clocks provided by the SoC to drive the timer, must contain
+ an entry for each entry in clock-names.
+- clock-names : must include "ipg" entry first, then "per" entry.
Example:
gpt1: timer@10003000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
- clocks = <&clks 46>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 18d4d0166c76..ff7c567a7972 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -1,7 +1,7 @@
-Mediatek Timers
+MediaTek Timers
---------------
-Mediatek SoCs have two different timers on different platforms,
+MediaTek SoCs have two different timers on different platforms,
- GPT (General Purpose Timer)
- SYST (System Timer)
@@ -9,6 +9,7 @@ The proper timer will be selected automatically by driver.
Required properties:
- compatible should contain:
+ For those SoCs that use GPT
* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
@@ -17,7 +18,11 @@ Required properties:
* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
- * "mediatek,mt6765-timer" for MT6765 compatible timers (SYST)
+
+ For those SoCs that use SYST
+ * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
+ * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
+
- reg: Should contain location and length for timer register.
- clocks: Should contain system clock.
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
new file mode 100644
index 000000000000..032cda96fe0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
@@ -0,0 +1,36 @@
+NVIDIA Tegra210 timer
+
+The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+or watchdog interrupts.
+
+Required properties:
+- compatible : "nvidia,tegra210-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 14 interrupts; one per each timer channels 0 through
+ 13.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+timer@60005000 {
+ compatible = "nvidia,tegra210-timer";
+ reg = <0x0 0x60005000 0x0 0x400>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+ clock-names = "timer";
+};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index 862a80f0380a..c0594450e9ef 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -32,6 +32,8 @@ Required Properties:
- "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470.
- "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1.
- "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1.
+ - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0.
+ - "renesas,r8a774c0-cmt1" for the 48-bit CMT1 device included in r8a774c0.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
- "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
- "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index 4ddff85837da..13ad07416bdd 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -10,6 +10,7 @@ Required Properties:
- compatible: must contain one or more of the following:
- "renesas,tmu-r8a7740" for the r8a7740 TMU
+ - "renesas,tmu-r8a774c0" for the r8a774C0 TMU
- "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
- "renesas,tmu-r8a77970" for the r8a77970 TMU
diff --git a/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
new file mode 100644
index 000000000000..ac44c4b67530
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
@@ -0,0 +1,17 @@
+Milbeaut SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "socionext,milbeaut-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer.
+- clocks: phandle to the input clk.
+
+Example:
+
+timer {
+ compatible = "socionext,milbeaut-timer";
+ reg = <0x1e000050 0x20>
+ interrupts = <0 91 4>;
+ clocks = <&clk 4>;
+};
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index cc64ec63a6ad..d79fb22bde39 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -322,6 +322,8 @@ properties:
- ti,ads7830
# Temperature Monitoring and Fan Control
- ti,amc6821
+ # Temperature sensor with integrated fan control
+ - ti,lm96000
# I2C Touch-Screen Controller
- ti,tsc2003
# Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
index a48c44817367..0b83df1a5418 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
+++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
@@ -6,9 +6,10 @@ Each UFS Host Controller should have its own node.
Required properties:
- compatible : compatible list, contains one of the following -
"hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
- host controller present on Hi36xx chipset.
+ host controller present on Hi3660 chipset.
+ "hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs
+ host controller present on Hi3670 chipset.
- reg : should contain UFS register address space & UFS SYS CTRL register address,
-- interrupt-parent : interrupt device
- interrupts : interrupt number
- clocks : List of phandle and clock specifier pairs
- clock-names : List of clock input name strings sorted in the same
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 8cf59452c675..5111e9130bc3 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,11 +4,14 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
Each UFS controller instance should have its own node.
Required properties:
-- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
- also list one or more of the following:
- "qcom,msm8994-ufshc"
- "qcom,msm8996-ufshc"
- "qcom,ufshc"
+- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0"
+
+ For Qualcomm SoCs must contain, as below, an
+ SoC-specific compatible along with "qcom,ufshc" and
+ the appropriate jedec string:
+ "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
+ "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
+ "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index adae82385dd6..a254386a91ad 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -93,6 +93,7 @@ i.mx specific properties
- over-current-active-low: over current signal polarity is active low.
- over-current-active-high: over current signal polarity is active high.
It's recommended to specify the over current polarity.
+- power-active-high: power signal polarity is active high
- external-vbus-divider: enables off-chip resistor divider for Vbus
Example:
diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
new file mode 100644
index 000000000000..620355cee63f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
@@ -0,0 +1,24 @@
+Ingenic JZ4740 MUSB driver
+
+Required properties:
+
+- compatible: Must be "ingenic,jz4740-musb"
+- reg: Address range of the UDC register set
+- interrupts: IRQ number related to the UDC hardware
+- interrupt-names: must be "mc"
+- clocks: phandle to the "udc" clock
+- clock-names: must be "udc"
+
+Example:
+
+udc: usb@13040000 {
+ compatible = "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4740_CLK_UDC>;
+ clock-names = "udc";
+};
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index f96e09f784cc..77df82e36138 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -3,7 +3,9 @@ TI Keystone Soc USB Controller
DWC3 GLUE
Required properties:
- - compatible: should be "ti,keystone-dwc3".
+ - compatible: should be
+ "ti,keystone-dwc3" for Keystone 2 SoCs
+ "ti,am654-dwc3" for AM654 SoC
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
with 'reg' property.
- reg : Address and length of the register set for the USB subsystem on
@@ -21,7 +23,7 @@ SoCs only:
- clock-names: Must be "usb".
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+The following are mandatory properties for 66AK2G and AM654:
- power-domains: Should contain a phandle to a PM domain provider node
and an args specifier containing the USB device id
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index 95afdcf3c337..cb695aa3fba4 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Compatible list, contains
"qcom,dwc3"
"qcom,msm8996-dwc3" for msm8996 SOC.
+ "qcom,msm8998-dwc3" for msm8998 SOC.
"qcom,sdm845-dwc3" for sdm845 SOC.
- reg: Offset and length of register set for QSCRATCH wrapper
- power-domains: specifies a phandle to PM domain provider node
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index d366555166d0..35039e720515 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -3,6 +3,7 @@ Renesas Electronics USB3.0 Peripheral driver
Required properties:
- compatible: Must contain one of the following:
- "renesas,r8a774a1-usb3-peri"
+ - "renesas,r8a774c0-usb3-peri"
- "renesas,r8a7795-usb3-peri"
- "renesas,r8a7796-usb3-peri"
- "renesas,r8a77965-usb3-peri"
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 90719f501852..d93b6a1504f2 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -7,6 +7,7 @@ Required properties:
- "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
- "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
+ - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device
- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
- "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 168ff819e827..17915f64b8ee 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,6 +64,8 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+ (D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
@@ -81,4 +83,6 @@ Examples:
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
+ /* correct misplaced usb connectors on port 1,2 */
+ swap-dx-lanes = <1 2>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389508584f48..8162b0eb4b50 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -24,6 +24,7 @@ amarula Amarula Solutions
amazon Amazon.com, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
+amediatech Shenzhen Amediatech Technology Co., Ltd
amlogic Amlogic, Inc.
ampire Ampire Co., Ltd.
ams AMS AG
@@ -65,6 +66,7 @@ bticino Bticino International
calxeda Calxeda
capella Capella Microsystems, Inc
cascoda Cascoda, Ltd.
+catalyst Catalyst Semiconductor, Inc.
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
cdtech CDTech(H.K.) Electronics Limited
@@ -108,11 +110,13 @@ dongwoon Dongwoon Anatech
dptechnics DPTechnics
dragino Dragino Technology Co., Limited
ea Embedded Artists AB
+ebs-systart EBS-SYSTART GmbH
ebv EBV Elektronik
eckelmann Eckelmann AG
edt Emerging Display Technologies
eeti eGalax_eMPIA Technology Inc
elan Elan Microelectronic Corp.
+elgin Elgin S/A.
embest Shenzhen Embest Technology Co., Ltd.
emlid Emlid, Ltd.
emmicro EM Microelectronic
@@ -136,11 +140,13 @@ fairphone Fairphone B.V.
faraday Faraday Technology Corporation
fastrax Fastrax Oy
fcs Fairchild Semiconductor
+feiyang Shenzhen Fly Young Technology Co.,LTD.
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd
fsl Freescale Semiconductor
fujitsu Fujitsu Ltd.
+gateworks Gateworks Corporation
gcw Game Consoles Worldwide
ge General Electric Company
geekbuying GeekBuying
@@ -150,6 +156,7 @@ geniatech Geniatech, Inc.
giantec Giantec Semiconductor, Inc.
giantplus Giantplus Technology Co., Ltd.
globalscale Globalscale Technologies, Inc.
+globaltop GlobalTop Technology, Inc.
gmt Global Mixed-mode Technology, Inc.
goodix Shenzhen Huiding Technology Co., Ltd.
google Google, Inc.
@@ -211,6 +218,7 @@ laird Laird PLC
lantiq Lantiq Semiconductor
lattice Lattice Semiconductor
lego LEGO Systems A/S
+lemaker Shenzhen LeMaker Technology Co., Ltd.
lenovo Lenovo Group Ltd.
lg LG Corporation
libretech Shenzhen Libre Technology Co., Ltd
@@ -273,6 +281,7 @@ nintendo Nintendo
nlt NLT Technologies, Ltd.
nokia Nokia
nordic Nordic Semiconductor
+novtech NovTech, Inc.
nutsboard NutsBoard
nuvoton Nuvoton Technology Corporation
nvd New Vision Display
@@ -297,6 +306,7 @@ ovti OmniVision Technologies
oxsemi Oxford Semiconductor, Ltd.
panasonic Panasonic Corporation
parade Parade Technologies Inc.
+pda Precision Design Associates, Inc.
pericom Pericom Technology Inc.
pervasive Pervasive Displays, Inc.
phicomm PHICOMM Co., Ltd.
@@ -304,6 +314,7 @@ phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
pine64 Pine64
pixcir PIXCIR MICROELECTRONICS Co., Ltd
+plantower Plantower Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
plx Broadcom Corporation (formerly PLX Technology)
@@ -390,6 +401,7 @@ tcl Toby Churchill Ltd.
technexion TechNexion
technologic Technologic Systems
tempo Tempo Semiconductor
+techstar Shenzhen Techstar Electronics Co., Ltd.
terasic Terasic Inc.
thine THine Electronics, Inc.
ti Texas Instruments
@@ -430,6 +442,7 @@ vot Vision Optical Technology Co., Ltd.
wd Western Digital Corp.
wetek WeTek Electronics, limited.
wexler Wexler
+whwave Shenzhen whwave Electronics, Inc.
wi2wi Wi2Wi, Inc.
winbond Winbond Electronics corp.
winstar Winstar Display Corp.
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index ef2b97b72e08..9f365c1a3399 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -8,6 +8,7 @@ Required properties:
- "renesas,r8a7743-wdt" (RZ/G1M)
- "renesas,r8a7744-wdt" (RZ/G1N)
- "renesas,r8a7745-wdt" (RZ/G1E)
+ - "renesas,r8a77470-wdt" (RZ/G1C)
- "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a774c0-wdt" (RZ/G2E)
- "renesas,r8a7790-wdt" (R-Car H2)
diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
new file mode 100644
index 000000000000..7cc1407f15cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
@@ -0,0 +1,11 @@
+STMicroelectronics STPMIC1 Watchdog
+
+Required properties:
+
+- compatible : should be "st,stpmic1-wdt"
+
+Example:
+
+watchdog {
+ compatible = "st,stpmic1-wdt";
+};