diff options
Diffstat (limited to 'Documentation/devicetree')
298 files changed, 7607 insertions, 2312 deletions
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore index ef82fcfcccab..57afa1533a5f 100644 --- a/Documentation/devicetree/bindings/.gitignore +++ b/Documentation/devicetree/bindings/.gitignore @@ -1,2 +1,2 @@ *.example.dts -processed-schema.yaml +processed-schema*.yaml diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 646cb3525373..1df680d07461 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -2,7 +2,6 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema -DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u) quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \ @@ -11,26 +10,35 @@ quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) $(obj)/%.example.dts: $(src)/%.yaml FORCE $(call if_changed,chk_binding) -DT_TMP_SCHEMA := processed-schema.yaml +# Use full schemas when checking %.example.dts +DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml quiet_cmd_mk_schema = SCHEMA $@ cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs) -DT_DOCS = $(shell \ +DT_DOCS = $(addprefix $(src)/, \ + $(shell \ cd $(srctree)/$(src) && \ find * \( -name '*.yaml' ! \ - -name $(DT_TMP_SCHEMA) ! \ + -name 'processed-schema*' ! \ -name '*.example.dt.yaml' \) \ - ) + )) -DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) +DT_SCHEMA_FILES ?= $(DT_DOCS) -ifeq ($(CHECK_DTBS),) -extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) -endif +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml -$(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE +override DTC_FLAGS := \ + -Wno-avoid_unnecessary_addr_size \ + -Wno-graph_child_address + +$(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE + $(call if_changed,mk_schema) + +$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u +$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE $(call if_changed,mk_schema) -extra-y += $(DT_TMP_SCHEMA) +extra-y += processed-schema.yaml diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index f493d69e6194..dc102c4e4a78 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -102,7 +102,7 @@ Required sub-node properties: [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/power/power-domain.yaml [3] Documentation/devicetree/bindings/thermal/thermal.txt -[4] Documentation/devicetree/bindings/sram/sram.txt +[4] Documentation/devicetree/bindings/sram/sram.yaml [5] Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index 7b83ef43b418..dd04d9d9a1b8 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -109,7 +109,7 @@ Required properties: [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/thermal/thermal.txt -[3] Documentation/devicetree/bindings/sram/sram.txt +[3] Documentation/devicetree/bindings/sram/sram.yaml [4] Documentation/devicetree/bindings/power/power-domain.yaml Example: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt index b82b6a0ae6f7..8c7a4908a849 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt @@ -62,7 +62,7 @@ Timer node: Syscon reboot node: -See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the +See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the detailed list of properties, the two values defined below are specific to the BCM6328-style timer: diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 7a9c3ce2dbef..0d5b61056b10 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -216,7 +216,7 @@ properties: $ref: '/schemas/types.yaml#/definitions/phandle-array' description: | List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). + by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: $ref: '/schemas/types.yaml#/definitions/uint32' diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index a8e0b4a813ed..0e17e1f6fb80 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -160,7 +160,7 @@ properties: items: - enum: - armadeus,imx6dl-apf6 # APF6 (Solo) SoM - - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board + - armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board - eckelmann,imx6dl-ci4x10 - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt index 115c5be0bd0b..8defacc44dd5 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt @@ -1,7 +1,7 @@ * Hisilicon Hi3519 System Controller Block This bindings use the following binding: -Documentation/devicetree/bindings/mfd/syscon.txt +Documentation/devicetree/bindings/mfd/syscon.yaml Required properties: - compatible: "hisilicon,hi3519-sysctrl". diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt index 06df04cc827a..6ce0b212ec6d 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt @@ -81,4 +81,4 @@ Example: }; }; -[1]. Documentation/devicetree/bindings/arm/idle-states.txt +[1]. Documentation/devicetree/bindings/arm/idle-states.yaml diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index f301e636fd52..e41490e6979c 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -17,7 +17,7 @@ am335x and am437x only: - pm-sram: Phandles to ocmcram nodes to be used for power management. First should be type 'protect-exec' for the driver to use to copy and run PM functions, second should be regular pool to be used for - data region for code. See Documentation/devicetree/bindings/sram/sram.txt + data region for code. See Documentation/devicetree/bindings/sram/sram.yaml for more details. Examples: diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 8ef85420b2ab..5e66934455bb 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -100,13 +100,14 @@ properties: bindings in [1]) must specify this property. [1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt - - "#power-domain-cells": - description: - The number of cells in a PM domain specifier as per binding in [3]. - Must be 0 as to represent a single PM domain. + Documentation/devicetree/bindings/arm/idle-states.yaml +patternProperties: + "^power-domain-": + allOf: + - $ref: "../power/power-domain.yaml#" + type: object + description: | ARM systems can have multiple cores, sometimes in an hierarchical arrangement. This often, but not always, maps directly to the processor power topology of the system. Individual nodes in a topology have their @@ -122,14 +123,8 @@ properties: helps to implement support for OSI mode and OS implementations may choose to mandate it. - [3] Documentation/devicetree/bindings/power/power_domain.txt - [4] Documentation/devicetree/bindings/power/domain-idle-state.txt - - power-domains: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: - List of phandles and PM domain specifiers, as defined by bindings of the - PM domain provider. + [3] Documentation/devicetree/bindings/power/power-domain.yaml + [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml required: - compatible @@ -199,7 +194,7 @@ examples: CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "psci"; power-domains = <&CPU_PD0>; @@ -208,7 +203,7 @@ examples: CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; enable-method = "psci"; power-domains = <&CPU_PD1>; @@ -224,6 +219,9 @@ examples: exit-latency-us = <10>; min-residency-us = <100>; }; + }; + + domain-idle-states { CLUSTER_RET: cluster-retention { compatible = "domain-idle-state"; @@ -247,19 +245,19 @@ examples: compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu-pd0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; domain-idle-states = <&CPU_PWRDN>; power-domains = <&CLUSTER_PD>; }; - CPU_PD1: cpu-pd1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; domain-idle-states = <&CPU_PWRDN>; power-domains = <&CLUSTER_PD>; }; - CLUSTER_PD: cluster-pd { + CLUSTER_PD: power-domain-cluster { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; }; diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 68917bb7c7e8..55f7938c4826 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -52,7 +52,7 @@ required: examples: - | - mlahb: ahb { + mlahb: ahb@38000000 { compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 9fe11ceecdba..80973619342d 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -70,7 +70,6 @@ examples: #size-cells = <0>; pmic@3e3 { - compatible = "..."; reg = <0x3e3>; /* ... */ diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml index 69cfa4a3d562..c604822cda07 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -40,7 +40,7 @@ additionalProperties: false examples: - | - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; reg = <0x01c20050 0x4>; diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml index 07f38def7dc3..43963c3062c8 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml @@ -41,7 +41,7 @@ additionalProperties: false examples: - | - clk@0600005c { + clk@600005c { #clock-cells = <0>; compatible = "allwinner,sun9i-a80-gt-clk"; reg = <0x0600005c 0x4>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 17f87178f6b8..3647007f82ca 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -42,7 +42,7 @@ properties: be part of GCC and hence the TSENS properties can also be part of the GCC/clock-controller node. For more details on the TSENS properties please refer - Documentation/devicetree/bindings/thermal/qcom-tsens.txt + Documentation/devicetree/bindings/thermal/qcom-tsens.yaml nvmem-cell-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 33c7842917f6..8b9a8f337f16 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -23,6 +23,8 @@ properties: - items: - const: allwinner,sun7i-a20-crypto - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml new file mode 100644 index 000000000000..55dd6e3d270d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings + +maintainers: + - Kalyani Akula <kalyani.akula@xilinx.com> + - Michal Simek <michal.simek@xilinx.com> + +description: | + The ZynqMP AES-GCM hardened cryptographic accelerator is used to + encrypt or decrypt the data with provided key and initialization vector. + +properties: + compatible: + const: xlnx,zynqmp-aes + +required: + - compatible + +additionalProperties: false + +examples: + - | + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + xlnx_aes: zynqmp-aes { + compatible = "xlnx,zynqmp-aes"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 86ad617d2327..e5344c4ae226 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -36,6 +36,12 @@ properties: - items: - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon + + - items: + - enum: - allwinner,sun50i-a64-tcon-lcd - const: allwinner,sun8i-a83t-tcon-lcd @@ -43,9 +49,13 @@ properties: - enum: - allwinner,sun8i-h3-tcon-tv - allwinner,sun50i-a64-tcon-tv - - allwinner,sun50i-h6-tcon-tv - const: allwinner,sun8i-a83t-tcon-tv + - items: + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml index 5d5d39665119..6009324be967 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -49,11 +49,7 @@ examples: resets = <&tcon_ch0_clk 0>; port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 2c887536258c..e8ddec5d9d91 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -1,10 +1,10 @@ -Analog Device ADV7511(W)/13/33 HDMI Encoders +Analog Device ADV7511(W)/13/33/35 HDMI Encoders ----------------------------------------- -The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters -compatible with HDMI 1.4 and DVI 1.0. They support color space conversion, -S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while -the others support RGB interface. +The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video +transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space +conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input +pixels, while the others support RGB interface. Required properties: @@ -13,6 +13,7 @@ Required properties: "adi,adv7511w" "adi,adv7513" "adi,adv7533" + "adi,adv7535" - reg: I2C slave addresses The ADV7511 internal registers are split into four pages exposed through @@ -52,14 +53,14 @@ The following input format properties are required except in "rgb 1x" and - bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is needed only for ADV7511. -The following properties are required for ADV7533: +The following properties are required for ADV7533 and ADV7535: - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should be one of 1, 2, 3 or 4. - a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. - v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. - v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be - either 1.2V or 1.8V. + either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535. Optional properties: @@ -71,9 +72,9 @@ Optional properties: - adi,embedded-sync: The input uses synchronization signals embedded in the data stream (similar to BT.656). Defaults to separate H/V synchronization signals. -- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing - generator. The chip will rely on the sync signals in the DSI data lanes, - rather than generate its own timings for HDMI output. +- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the + internal timing generator. The chip will rely on the sync signals in the + DSI data lanes, rather than generate its own timings for HDMI output. - clocks: from common clock binding: reference to the CEC clock. - clock-names: from common clock binding: must be "cec". - reg-names : Names of maps with programmable addresses. @@ -85,7 +86,7 @@ Required nodes: The ADV7511 has two video ports. Their connections are modelled using the OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. -- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the +- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the remote endpoint phandle should be a reference to a valid mipi_dsi_host device node. - Video port 1 for the HDMI output diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index 6d72b3d11fbc..c21103869923 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -79,21 +79,15 @@ examples: #size-cells = <0>; anx6345_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - anx6345_in_tcon0: endpoint@0 { - reg = <0>; + anx6345_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_anx6345>; }; }; anx6345_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - anx6345_out_panel: endpoint@0 { - reg = <0>; + anx6345_out_panel: endpoint { remote-endpoint = <&panel_in_edp>; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml new file mode 100644 index 000000000000..5dff93641bea --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI DSI to eDP Video Format Converter Device Tree Bindings + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + The PS8640 is a low power MIPI-to-eDP video format converter supporting + mobile devices with embedded panel resolutions up to 2048 x 1536. The + device accepts a single channel of MIPI DSI v1.1, with up to four lanes + plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The + device outputs eDP v1.4, one or two lanes, at a link rate of up to + 3.24Gbit/sec per lane. + +properties: + compatible: + const: parade,ps8640 + + reg: + maxItems: 1 + description: Base I2C address of the device. + + powerdown-gpios: + maxItems: 1 + description: GPIO connected to active low powerdown. + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset. + + vdd12-supply: + maxItems: 1 + description: Regulator for 1.2V digital core power. + + vdd33-supply: + maxItems: 1 + description: Regulator for 3.3V digital core power. + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: | + Video port for DSI input + + port@1: + type: object + description: | + Video port for eDP output (panel or connector). + + required: + - port@0 + +required: + - compatible + - reg + - powerdown-gpios + - reset-gpios + - vdd12-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + ps8640: edp-bridge@18 { + compatible = "parade,ps8640"; + reg = <0x18>; + powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml new file mode 100644 index 000000000000..c036a75db8f7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@ti.com> + +description: | + The TC358768/TC358778 is bridge device which converts RGB to DSI. + +properties: + compatible: + enum: + - toshiba,tc358768 + - toshiba,tc358778 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low RESX pin + + vddc-supply: + description: Regulator for 1.2V internal core power. + + vddmipi-supply: + description: Regulator for 1.2V for the MIPI. + + vddio-supply: + description: Regulator for 1.8V - 3.3V IO power. + + clocks: + maxItems: 1 + + clock-names: + const: refclk + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: | + Video port for RGB input + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lines: + enum: [ 16, 18, 24 ] + + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: | + Video port for DSI output (panel or connector). + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - vddc-supply + - vddmipi-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + dsi_bridge: dsi-bridge@e { + compatible = "toshiba,tc358768"; + reg = <0xe>; + + clocks = <&tc358768_refclk>; + clock-names = "refclk"; + + reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>; + + vddc-supply = <&v1_2d>; + vddmipi-supply = <&v1_2d>; + vddio-supply = <&v3_3d>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + rgb_in: endpoint { + remote-endpoint = <&dpi_out>; + data-lines = <24>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt index 0c0970c210ab..883bcb2604c7 100644 --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt @@ -6,16 +6,22 @@ Required properties: Optional properties: - label: a symbolic name for the connector +- sdtv-standards: limit the supported TV standards on a connector to the given + ones. If not specified all TV standards are allowed. + Possible TV standards are defined in + include/dt-bindings/display/sdtv-standards.h. Required nodes: - Video port for TV input Example ------- +#include <dt-bindings/display/sdtv-standards.h> tv: connector { compatible = "composite-video-connector"; label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; port { tv_connector_in: endpoint { diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml new file mode 100644 index 000000000000..66e93e563653 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9486 display panels device tree bindings + +maintainers: + - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> + +description: + This binding is for display panels using an Ilitek ILI9486 controller in SPI + mode. + +allOf: + - $ref: panel/panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Waveshare 3.5" 320x480 Color TFT LCD + - waveshare,rpi-lcd-35 + # Ozzmaker 3.5" 320x480 Color TFT LCD + - ozzmaker,piscreen + - const: ilitek,ili9486 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + + display@0{ + compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt index b6a7e7397b8b..58914cf681b8 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt @@ -7,6 +7,7 @@ output bus. Required properties: - compatible: "mediatek,<chip>-dpi" + the supported chips are mt2701 , mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt deleted file mode 100644 index bf9c7a2a495c..000000000000 --- a/Documentation/devicetree/bindings/display/msm/gmu.txt +++ /dev/null @@ -1,116 +0,0 @@ -Qualcomm adreno/snapdragon GMU (Graphics management unit) - -The GMU is a programmable power controller for the GPU. the CPU controls the -GMU which in turn handles power controls for the GPU. - -Required properties: -- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu" - for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" - Note that you need to list the less specific "qcom,adreno-gmu" - for generic matches and the more specific identifier to identify - the specific device. -- reg: Physical base address and length of the GMU registers. -- reg-names: Matching names for the register regions - * "gmu" - * "gmu_pdc" - * "gmu_pdc_seg" -- interrupts: The interrupt signals from the GMU. -- interrupt-names: Matching names for the interrupts - * "hfi" - * "gmu" -- clocks: phandles to the device clocks -- clock-names: Matching names for the clocks - * "gmu" - * "cxo" - * "axi" - * "mnoc" -- power-domains: should be: - <&clock_gpucc GPU_CX_GDSC> - <&clock_gpucc GPU_GX_GDSC> -- power-domain-names: Matching names for the power domains -- iommus: phandle to the adreno iommu -- operating-points-v2: phandle to the OPP operating points - -Optional properties: -- sram: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon - SoCs. See Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Example: - -/ { - ... - - gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - - reg = <0x506a000 0x30000>, - <0xb280000 0x10000>, - <0xb480000 0x10000>; - reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; - - interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hfi", "gmu"; - - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>; - clock-names = "gmu", "cxo", "axi", "memnoc"; - - power-domains = <&gpucc GPU_CX_GDSC>, - <&gpucc GPU_GX_GDSC>; - power-domain-names = "cx", "gx"; - - iommus = <&adreno_smmu 5>; - - operating-points-v2 = <&gmu_opp_table>; - }; -}; - -a3xx example with OCMEM support: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - }; - - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml new file mode 100644 index 000000000000..0b8736a9384e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright 2019-2020, The Linux Foundation, All Rights Reserved +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the GMU attached to certain Adreno GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +description: | + These bindings describe the Graphics Management Unit (GMU) that is attached + to members of the Adreno A6xx GPU family. The GMU provides on-device power + management and support to improve power efficiency and reduce the load on + the CPU. + +properties: + compatible: + items: + - enum: + - qcom,adreno-gmu-630.2 + - const: qcom,adreno-gmu + + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + interrupts: + items: + - description: GMU HFI interrupt + - description: GMU interrupt + + + interrupt-names: + items: + - const: hfi + - const: gmu + + power-domains: + items: + - description: CX power domain + - description: GX power domain + + power-domain-names: + items: + - const: cx + - const: gx + + iommus: + maxItems: 1 + + operating-points-v2: true + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - power-domains + - power-domain-names + - iommus + - operating-points-v2 + +examples: + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 7edc298a15f2..fd779cd6994d 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -35,25 +35,54 @@ Required properties: bring the GPU out of secure mode. - firmware-name: optional property of the 'zap-shader' node, listing the relative path of the device specific zap firmware. +- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. -Example 3xx/4xx/a5xx: +Example 3xx/4xx: / { ... - gpu: qcom,kgsl-3d0@4300000 { - compatible = "qcom,adreno-320.2", "qcom,adreno"; - reg = <0x04300000 0x20000>; + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 80 0>; - clock-names = - "core", - "iface", - "mem_iface"; - clocks = - <&mmcc GFX3D_CLK>, - <&mmcc GFX3D_AHB_CLK>, - <&mmcc MMSS_IMEM_AHB_CLK>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + }; + + gpu_sram: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", + "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", + "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + ranges = <0 0 0xfec00000 0x100000>; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml new file mode 100644 index 000000000000..93878c2cd370 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: advantech,idk-1110wr + - {} # panel-lvds, but not listed here to avoid false select + + data-mapping: + const: jeida-24 + + width-mm: + const: 223 + + height-mm: + const: 125 + + panel-timing: true + port: true + +additionalProperties: false + +required: + - compatible + +examples: + - |+ + panel { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vsync-len = <10>; + vfront-porch = <15>; + vback-porch = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml new file mode 100644 index 000000000000..6b7fddc80c41 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel. + A dual-LVDS interface is a dual-link connection with even pixels traveling + on one link, and with odd pixels traveling on the other link. + + The panel expects odd pixels on the first port, and even pixels on the + second port, therefore the ports must be marked accordingly (with either + dual-lvds-odd-pixels or dual-lvds-even-pixels). + +properties: + compatible: + items: + - const: advantech,idk-2121wr + - {} # panel-lvds, but not listed here to avoid false select + + width-mm: + const: 476 + + height-mm: + const: 268 + + data-mapping: + const: vesa-24 + + panel-timing: true + + ports: + type: object + properties: + port@0: + type: object + description: The sink for odd pixels. + properties: + reg: + const: 0 + + dual-lvds-odd-pixels: true + + required: + - reg + - dual-lvds-odd-pixels + + port@1: + type: object + description: The sink for even pixels. + properties: + reg: + const: 1 + + dual-lvds-even-pixels: true + + required: + - reg + - dual-lvds-even-pixels + +additionalProperties: false + +required: + - compatible + - width-mm + - height-mm + - data-mapping + - panel-timing + - ports + +examples: + - |+ + panel-lvds { + compatible = "advantech,idk-2121wr", "panel-lvds"; + + width-mm = <476>; + height-mm = <268>; + + data-mapping = "vesa-24"; + + panel-timing { + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <44>; + hfront-porch = <88>; + hback-porch = <148>; + vfront-porch = <4>; + vback-porch = <36>; + vsync-len = <5>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + panel_in0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + panel_in1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt b/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt deleted file mode 100644 index bae0e2b51467..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 8.0" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101ean01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt b/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt deleted file mode 100644 index 72e088a4fb3a..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 10.1" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101aw03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt b/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt deleted file mode 100644 index 3590b0741619..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 10.1" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101ean01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt deleted file mode 100644 index 889d511d66c9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101xtn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt b/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt deleted file mode 100644 index 690d0a568ef3..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel - -Required properties: -- compatible: should be "auo,b116xw03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt deleted file mode 100644 index 302226b5bb55..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel - -Required properties: -- compatible: should be "auo,b133htn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt deleted file mode 100644 index 7443b7c76769..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel - -Required properties: -- compatible: should be "auo,b133xtn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt deleted file mode 100644 index 49e4105378f6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt +++ /dev/null @@ -1,29 +0,0 @@ -AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel - -Required properties: -- compatible: should be "auo,g070vvn01" -- backlight: phandle of the backlight device attached to the panel -- power-supply: single regulator to provide the supply voltage - -Required nodes: -- port: Parallel port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX6Q based board - - lcd_panel: lcd-panel { - compatible = "auo,g070vvn01"; - backlight = <&backlight_lcd>; - power-supply = <®_display>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt deleted file mode 100644 index bc6a0c858e23..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt +++ /dev/null @@ -1,12 +0,0 @@ -AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel - -Required properties: -- compatible: should be "auo,g101evn010" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt deleted file mode 100644 index 85626edf63e5..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt +++ /dev/null @@ -1,12 +0,0 @@ -AU Optronics Corporation 10.4" (800x600) color TFT LCD panel - -Required properties: -- compatible: should be "auo,g104sn02" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt b/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt deleted file mode 100644 index 3afc76747824..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - -Required properties: -- compatible: should be "auo,g133han01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt b/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt deleted file mode 100644 index ed657c2141d4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - -Required properties: -- compatible: should be "auo,g185han01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt deleted file mode 100644 index 59bb6cd8aa75..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt +++ /dev/null @@ -1,8 +0,0 @@ -AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel - -Required properties: -- compatible: should be "auo,p320hvn03" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt deleted file mode 100644 index cbd9da3f03b1..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel - -Required properties: -- compatible: should be "auo,t215hvn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt b/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt deleted file mode 100644 index b6f2f3e8f44e..000000000000 --- a/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt +++ /dev/null @@ -1,7 +0,0 @@ -Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - -Required properties: -- compatible: should be "avic,tm070ddh03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt deleted file mode 100644 index 55183d360032..000000000000 --- a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt +++ /dev/null @@ -1,28 +0,0 @@ -BOE HV070WSA-100 7.01" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "boe,hv070wsa-100" -- power-supply: regulator to provide the VCC supply voltage (3.3 volts) -- enable-gpios: GPIO pin to enable and disable panel (active high) - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [1]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - panel: panel { - compatible = "boe,hv070wsa-100"; - power-supply = <&vcc_3v3_reg>; - enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; - port { - panel_ep: endpoint { - remote-endpoint = <&bridge_out_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt deleted file mode 100644 index b258d6a91ec6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt +++ /dev/null @@ -1,7 +0,0 @@ -BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "boe,nv101wxmn51" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt deleted file mode 100644 index 50be5e2438b2..000000000000 --- a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt +++ /dev/null @@ -1,7 +0,0 @@ -Boe Corporation 8.0" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "boe,tv080wum-nl0" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml new file mode 100644 index 000000000000..740213459134 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TV101WUM-NL6 DSI Display Panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel + - boe,tv101wum-nl6 + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel + - auo,kd101n80-45na + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel + - boe,tv101wum-n53 + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel + - auo,b101uan08.3 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt deleted file mode 100644 index 057f7f3f6dbe..000000000000 --- a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt +++ /dev/null @@ -1,12 +0,0 @@ -CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel - -Required properties: -- compatible: should be "cdtech,s043wq26h-ct7" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt deleted file mode 100644 index 505615dfa0df..000000000000 --- a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt +++ /dev/null @@ -1,12 +0,0 @@ -CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel - -Required properties: -- compatible: should be "cdtech,s070wv95-ct16" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt deleted file mode 100644 index dd22685d2adc..000000000000 --- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt +++ /dev/null @@ -1,7 +0,0 @@ -Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - -Required properties: -- compatible: should be "chunghwa,claa070wp03xg" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt deleted file mode 100644 index f24614e4d5ec..000000000000 --- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt +++ /dev/null @@ -1,7 +0,0 @@ -Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "chunghwa,claa101wa01a" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt deleted file mode 100644 index 0ab2c05a4c22..000000000000 --- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt +++ /dev/null @@ -1,7 +0,0 @@ -Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "chunghwa,claa101wb03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt deleted file mode 100644 index 897085ee3cd4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt +++ /dev/null @@ -1,8 +0,0 @@ -DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. - -Required properties: -- compatible: should be "dataimage,scf0700c48ggu18" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt index 78222ced1874..7f55ad4a40c4 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt @@ -1,123 +1 @@ -display-timing bindings -======================= - -display-timings node --------------------- - -required properties: - - none - -optional properties: - - native-mode: The native mode for the display, in case multiple modes are - provided. When omitted, assume the first node is the native. - -timing subnode --------------- - -required properties: - - hactive, vactive: display resolution - - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters - in pixels - vfront-porch, vback-porch, vsync-len: vertical display timing parameters in - lines - - clock-frequency: display clock in Hz - -optional properties: - - hsync-active: hsync pulse is active low/high/ignored - - vsync-active: vsync pulse is active low/high/ignored - - de-active: data-enable pulse is active low/high/ignored - - pixelclk-active: with - - active high = drive pixel data on rising edge/ - sample data on falling edge - - active low = drive pixel data on falling edge/ - sample data on rising edge - - ignored = ignored - - syncclk-active: with - - active high = drive sync on rising edge/ - sample sync on falling edge of pixel - clock - - active low = drive sync on falling edge/ - sample sync on rising edge of pixel - clock - - omitted = same configuration as pixelclk-active - - interlaced (bool): boolean to enable interlaced mode - - doublescan (bool): boolean to enable doublescan mode - - doubleclk (bool): boolean to enable doubleclock mode - -All the optional properties that are not bool follow the following logic: - <1>: high active - <0>: low active - omitted: not used on hardware - -There are different ways of describing the capabilities of a display. The -devicetree representation corresponds to the one commonly found in datasheets -for displays. If a display supports multiple signal timings, the native-mode -can be specified. - -The parameters are defined as: - - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vback_porch | | | - | | v | | | - +----------#######################################----------+-------+ - | # ^ # | | - | # | # | | - | hback # | # hfront | hsync | - | porch # | hactive # porch | len | - |<-------->#<-------+--------------------------->#<-------->|<----->| - | # | # | | - | # |vactive # | | - | # | # | | - | # v # | | - +----------#######################################----------+-------+ - | | ^ | | | - | | |vfront_porch | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vsync_len | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - -Note: In addition to being used as subnode(s) of display-timings, the timing - subnode may also be used on its own. This is appropriate if only one mode - need be conveyed. In this case, the node should be named 'panel-timing'. - - -Example: - - display-timings { - native-mode = <&timing0>; - timing0: 1080p24 { - /* 1920x1080p24 */ - clock-frequency = <52000000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <25>; - hback-porch = <25>; - hsync-len = <25>; - vback-porch = <2>; - vfront-porch = <2>; - vsync-len = <2>; - hsync-active = <1>; - }; - }; - -Every required property also supports the use of ranges, so the commonly used -datasheet description with minimum, typical and maximum values can be used. - -Example: - - timing1: timing { - /* 1920x1080p24 */ - clock-frequency = <148500000>; - hactive = <1920>; - vactive = <1080>; - hsync-len = <0 44 60>; - hfront-porch = <80 88 95>; - hback-porch = <100 148 160>; - vfront-porch = <0 4 6>; - vback-porch = <0 36 50>; - vsync-len = <0 5 6>; - }; +See display-timings.yaml in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml new file mode 100644 index 000000000000..c8c0c9cb0492 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/display-timings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: display timing bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + A display panel may be able to handle several display timings, + with different resolutions. + The display-timings node makes it possible to specify the timing + and to specify the timing that is native for the display. + +properties: + $nodename: + const: display-timings + + native-mode: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + The default display timing is the one specified as native-mode. + If no native-mode is specified then the first node is assumed the + native mode. + +patternProperties: + "^timing": + type: object + allOf: + - $ref: panel-timing.yaml# + +additionalProperties: false + +examples: + - |+ + + /* + * Example that specifies panel timing using minimum, typical, + * maximum values as commonly used in datasheet description. + * timing1 is the native-mode. + */ + display-timings { + native-mode = <&timing1>; + timing0 { + /* 1920x1080p24 */ + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <0 44 60>; + hfront-porch = <80 88 95>; + hback-porch = <100 148 160>; + vfront-porch = <0 4 6>; + vback-porch = <0 36 50>; + vsync-len = <0 5 6>; + }; + timing1 { + /* 1920x1080p24 */ + clock-frequency = <52000000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <25>; + hback-porch = <25>; + hsync-len = <0 25 25>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <2>; + hsync-active = <1>; + pixelclk-active = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt deleted file mode 100644 index fbf5dcd15661..000000000000 --- a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt +++ /dev/null @@ -1,12 +0,0 @@ -DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel - -Required properties: -- compatible: should be "dlc,dlc1010gig" -- power-supply: See simple-panel.txt - -Optional properties: -- enable-gpios: See simple-panel.txt -- backlight: See simple-panel.txt - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt deleted file mode 100644 index b7ac1c725f97..000000000000 --- a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt +++ /dev/null @@ -1,55 +0,0 @@ -Emerging Display Technology Corp. Displays -========================================== - - -Display bindings for EDT Display Technology Corp. Displays which are -compatible with the simple-panel binding, which is specified in -simple-panel.txt - -3,5" QVGA TFT Panels --------------------- -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ET035012DM6 | edt,et035012dm6 | 3.5" QVGA TFT LCD panel | -+-----------------+---------------------+-------------------------------------+ - -4,3" WVGA TFT Panels --------------------- - -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ETM0430G0DH6 | edt,etm0430g0dh6 | 480x272 TFT Display | -+-----------------+---------------------+-------------------------------------+ - -5,7" WVGA TFT Panels --------------------- - -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ET057090DHU | edt,et057090dhu | 5.7" VGA TFT LCD panel | -+-----------------+---------------------+-------------------------------------+ - - -7,0" WVGA TFT Panels --------------------- - -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ETM0700G0DH6 | edt,etm070080dh6 | WVGA TFT Display with capacitive | -| | edt,etm0700g0dh6 | Touchscreen | -+-----------------+---------------------+-------------------------------------+ -| ETM0700G0BDH6 | edt,etm070080bdh6 | Same as ETM0700G0DH6 but with | -| | | inverted pixel clock. | -+-----------------+---------------------+-------------------------------------+ -| ETM0700G0EDH6 | edt,etm070080edh6 | Same display as the ETM0700G0BDH6, | -| | | but with changed Hardware for the | -| | | backlight and the touch interface | -+-----------------+---------------------+-------------------------------------+ -| ET070080DH6 | edt,etm070080dh6 | Same timings as the ETM0700G0DH6, | -| | | but with resistive touch. | -+-----------------+---------------------+-------------------------------------+ - diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml new file mode 100644 index 000000000000..aa761f697b7a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elida KD35T133 3.5in 320x480 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: elida,kd35t133 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vdd-supply: + description: regulator that supplies the vdd voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "elida,kd35t133"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vdd-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt b/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt deleted file mode 100644 index 82d22e191ac3..000000000000 --- a/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt +++ /dev/null @@ -1,12 +0,0 @@ -Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - -Required properties: -- compatible: should be "evervision,vgg804821" -- power-supply: See simple-panel.txt - -Optional properties: -- backlight: See simple-panel.txt -- enable-gpios: See simple-panel.txt - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml new file mode 100644 index 000000000000..927f1eea18d2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel + +maintainers: + - Icenowy Zheng <icenowy@aosc.io> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: feixin,k101-im2ba02 + reg: true + backlight: true + reset-gpios: true + avdd-supply: + description: regulator that supplies the AVDD voltage + dvdd-supply: + description: regulator that supplies the DVDD voltage + cvdd-supply: + description: regulator that supplies the CVDD voltage + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - cvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "feixin,k101-im2ba02"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dc1sw>; + cvdd-supply = <®_ldo_io1>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt b/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt deleted file mode 100644 index b47f9d87bc19..000000000000 --- a/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt +++ /dev/null @@ -1,7 +0,0 @@ -Foxlink Group 5" WVGA TFT LCD panel - -Required properties: -- compatible: should be "foxlink,fl500wvr00-a0t" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt b/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt deleted file mode 100644 index 6c9156fc3478..000000000000 --- a/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt +++ /dev/null @@ -1,32 +0,0 @@ -FriendlyELEC HD702E 800x1280 LCD panel - -HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 -resolution. It has built in Goodix, GT9271 captive touchscreen -with backlight adjustable via PWM. - -Required properties: -- compatible: should be "friendlyarm,hd702e" -- power-supply: regulator to provide the supply voltage - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Optional nodes: -- Video port for LCD panel input. - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Example: - - panel { - compatible ="friendlyarm,hd702e", "simple-panel"; - backlight = <&backlight>; - power-supply = <&vcc3v3_sys>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt b/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt deleted file mode 100644 index 24b0b624434b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt +++ /dev/null @@ -1,7 +0,0 @@ -GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel - -Required properties: -- compatible: should be "giantplus,gpg48273qs5" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt b/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt deleted file mode 100644 index 7da1d5c038ff..000000000000 --- a/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt +++ /dev/null @@ -1,7 +0,0 @@ -HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel - -Required properties: -- compatible: should be "hannstar,hsd070pww1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt b/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt deleted file mode 100644 index 8270319a99de..000000000000 --- a/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt +++ /dev/null @@ -1,7 +0,0 @@ -HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel - -Required properties: -- compatible: should be "hannstar,hsd100pxn1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt b/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt deleted file mode 100644 index 04caaae19af6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt +++ /dev/null @@ -1,7 +0,0 @@ -Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - -Required properties: -- compatible: should be "hit,tx23d38vm0caa" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt b/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt deleted file mode 100644 index 4104226b61bc..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux AT043TN24 4.3" WQVGA TFT LCD panel - -Required properties: -- compatible: should be "innolux,at043tn24" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt deleted file mode 100644 index 3e10cd782491..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux AT070TN92 7.0" WQVGA TFT LCD panel - -Required properties: -- compatible: should be "innolux,at070tn92" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt deleted file mode 100644 index 7c234cf68e11..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt +++ /dev/null @@ -1,12 +0,0 @@ -Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - -Required properties: -- compatible: should be "innolux,g070y2-l01" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt deleted file mode 100644 index 9e7590465227..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel - -Required properties: -- compatible: should be "innolux,g101ice-l01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt deleted file mode 100644 index 2743b07cd2f2..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel - -Required properties: -- compatible: should be "innolux,g121i1-l01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt deleted file mode 100644 index 649744620ae1..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel - -Required properties: -- compatible: should be "innolux,g121x1-l03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt b/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt deleted file mode 100644 index 081bb939ed31..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - -Required properties: -- compatible: should be "innolux,n116bge" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt b/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt deleted file mode 100644 index 7825844aafdf..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt +++ /dev/null @@ -1,7 +0,0 @@ -InnoLux 15.6" WXGA TFT LCD panel - -Required properties: -- compatible: should be "innolux,n156bge-l21" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt b/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt deleted file mode 100644 index 824f87f1526d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - -Required properties: -- compatible: should be "innolux,zj070na-01p" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt deleted file mode 100644 index be7ac666807b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt +++ /dev/null @@ -1,42 +0,0 @@ -Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - -Required properties: -- compatible: should be "koe,tx14d24vm1bpa" -- backlight: phandle of the backlight device attached to the panel -- power-supply: single regulator to provide the supply voltage - -Required nodes: -- port: Parallel port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX53 based board - - lcd_panel: lcd-panel { - compatible = "koe,tx14d24vm1bpa"; - backlight = <&backlight_lcd>; - power-supply = <®_3v3>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - -Then one needs to extend the dispX node: - - lcd_display: disp1 { - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt deleted file mode 100644 index 6a036ede3e28..000000000000 --- a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt +++ /dev/null @@ -1,25 +0,0 @@ -Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Required properties: -- compatible: should be "koe,tx31d200vm0baa" - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Optional nodes: -- Video port for LVDS panel input. - -Example: - panel { - compatible = "koe,tx31d200vm0baa"; - backlight = <&backlight_lvds>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt deleted file mode 100644 index a8e940fe731e..000000000000 --- a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt +++ /dev/null @@ -1,7 +0,0 @@ -Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel - -Required properties: -- compatible: should be "kyo,tcg121xglp" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index 4ebcea7d0c63..fd931b293816 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -34,9 +34,11 @@ additionalProperties: false examples: - | - dsi@ff450000 { + dsi { #address-cells = <1>; #size-cells = <0>; + reg = <0xff450000 0x1000>; + panel@0 { compatible = "leadtek,ltk500hd1829"; reg = <0>; diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt deleted file mode 100644 index 74ee7ea6b493..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt +++ /dev/null @@ -1,12 +0,0 @@ -LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel - -Required properties: -- compatible: should be "lemaker,bl035-rgb-002" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt b/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt deleted file mode 100644 index a7588e5259cf..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 7" (800x480 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lb070wv8" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt b/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt deleted file mode 100644 index b9877acad012..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp079qx1-sp0v" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt deleted file mode 100644 index 42141516f078..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 9.7" (2048x1536 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp097qx1-spa1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt deleted file mode 100644 index 8c5de692c55c..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 12.0" (1920x1280 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp120up1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt b/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt deleted file mode 100644 index 9f262e0c5a2e..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 12.9" (2560x1700 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp129qe" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt deleted file mode 100644 index 7d8f6eeef6d9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "mitsubishi,aa070mc01-ca1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt b/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt deleted file mode 100644 index 71cbc49ecfab..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt +++ /dev/null @@ -1,8 +0,0 @@ -NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel - -Required properties: -- compatible: should be "nec,nl12880bc20-05" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt b/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt deleted file mode 100644 index 8e1914d1edb8..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt +++ /dev/null @@ -1,7 +0,0 @@ -NEC LCD Technologies,Ltd. WQVGA TFT LCD panel - -Required properties: -- compatible: should be "nec,nl4827hc19-05b" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt deleted file mode 100644 index c6d06b5eab51..000000000000 --- a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt +++ /dev/null @@ -1,7 +0,0 @@ -Netron-DY E231732 7.0" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "netron-dy,e231732" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt deleted file mode 100644 index e78292b1a131..000000000000 --- a/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt +++ /dev/null @@ -1,7 +0,0 @@ -Newhaven Display International 480 x 272 TFT LCD panel - -Required properties: -- compatible: should be "newhaven,nhd-4.3-480272ef-atxl" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt b/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt deleted file mode 100644 index 1a639fd8778d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt +++ /dev/null @@ -1,8 +0,0 @@ -NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel - -Required properties: -- compatible: should be "nlt,nl192108ac18-02d" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml new file mode 100644 index 000000000000..73d2ff3baaff --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35510-based display panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: hydis,hva40wv1 + - const: novatek,nt35510 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35510 panel driver. The compatible + string determines how the NT35510 panel driver shall be configured + to work with the indicated panel. The novatek,nt35510 compatible shall + always be provided as a fallback. + reg: true + reset-gpios: true + vdd-supply: + description: regulator that supplies the vdd voltage + vddi-supply: + description: regulator that supplies the vddi voltage + backlight: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hydis,hva40wv1", "novatek,nt35510"; + reg = <0>; + vdd-supply = <&ab8500_ldo_aux4_reg>; + vddi-supply = <&ab8500_ldo_aux6_reg>; + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + backlight = <&gpio_bl>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/nvd,9128.txt b/Documentation/devicetree/bindings/display/panel/nvd,9128.txt deleted file mode 100644 index 17bcd017c678..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nvd,9128.txt +++ /dev/null @@ -1,7 +0,0 @@ -New Vision Display 7.0" 800 RGB x 480 TFT LCD panel - -Required properties: -- compatible: should be "nvd,9128" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt b/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt deleted file mode 100644 index ddf8e211d382..000000000000 --- a/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt +++ /dev/null @@ -1,7 +0,0 @@ -OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel - -Required properties: -- compatible: should be "okaya,rs800480t-7x0gp" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt deleted file mode 100644 index 74540a090669..000000000000 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt +++ /dev/null @@ -1,7 +0,0 @@ -Olimex 4.3" TFT LCD panel - -Required properties: -- compatible: should be "olimex,lcd-olinuxino-43-ts" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt deleted file mode 100644 index 3d8a5e029242..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt +++ /dev/null @@ -1,7 +0,0 @@ -On Tat Industrial Company 7" DPI TFT panel. - -Required properties: -- compatible: should be "ontat,yx700wv03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt deleted file mode 100644 index 203b03eefb68..000000000000 --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt +++ /dev/null @@ -1,23 +0,0 @@ -Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) - -The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using -a MIPI-DSI video interface. Its backlight is managed through the DSI link. - -Required properties: - - compatible: "orisetech,otm8009a" - - reg: the virtual channel number of a DSI peripheral - -Optional properties: - - reset-gpios: a GPIO spec for the reset pin (active low). - - power-supply: phandle of the regulator that provides the supply voltage. - -Example: -&dsi { - ... - panel@0 { - compatible = "orisetech,otm8009a"; - reg = <0>; - reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; - power-supply = <&v1v8>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml new file mode 100644 index 000000000000..4b6dda6dbc0f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using + a MIPI-DSI video interface. Its backlight is managed through the DSI link. +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + const: orisetech,otm8009a + + reg: + maxItems: 1 + description: DSI virtual channel + + enable-gpios: true + port: true + power-supply: true + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpiof 15 0>; + power-supply = <&v1v8>; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt deleted file mode 100644 index c16907c02f80..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt +++ /dev/null @@ -1,12 +0,0 @@ -OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel - -Required properties: -- compatible: should be "ortustech,com37h3m05dtc" - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- power-supply: phandle of the regulator that provides the supply voltage - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt deleted file mode 100644 index 06a73c3f46b5..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt +++ /dev/null @@ -1,12 +0,0 @@ -OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel - -Required properties: -- compatible: should be "ortustech,com37h3m99dtc" - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- power-supply: phandle of the regulator that provides the supply voltage - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt deleted file mode 100644 index de19e9398618..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt +++ /dev/null @@ -1,7 +0,0 @@ -OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel - -Required properties: -- compatible: should be "ortustech,com43h4m85ulc" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt deleted file mode 100644 index e57883ccdf2f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt +++ /dev/null @@ -1,12 +0,0 @@ -OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel - -Required properties: -- compatible: shall be "osddisplays,osd070t1718-19ts" -- power-supply: see simple-panel.txt - -Optional properties: -- backlight: see simple-panel.txt - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. No other simple-panel properties than -the ones specified herein are valid. diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt deleted file mode 100644 index 85c0b2cacfda..000000000000 --- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt +++ /dev/null @@ -1,11 +0,0 @@ -One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel - -Required properties: -- compatible: should be "osddisplays,osd101t2045-53ts" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt deleted file mode 100644 index d328b0341bf4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt +++ /dev/null @@ -1,7 +0,0 @@ -Panasonic Corporation 10.1" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "panasonic,vvx10f004b00" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt deleted file mode 100644 index 37dedf6a6702..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt +++ /dev/null @@ -1,20 +0,0 @@ -Panasonic 10" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "panasonic,vvx10f034n00" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - mdss_dsi@fd922800 { - panel@0 { - compatible = "panasonic,vvx10f034n00"; - reg = <0>; - power-supply = <&vreg_vsp>; - backlight = <&lp8566_wled>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index ef8d8cdfcede..ed051ba12084 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -54,13 +54,20 @@ properties: # Display Timings panel-timing: - type: object description: Most display panels are restricted to a single resolution and require specific display timings. The panel-timing subnode expresses those - timings as specified in the timing subnode section of the display timing - bindings defined in - Documentation/devicetree/bindings/display/panel/display-timing.txt. + timings. + allOf: + - $ref: panel-timing.yaml# + + display-timings: + description: + Some display panels supports several resolutions with different timing. + The display-timings bindings supports specifying several timings and + optional specify which is the native mode. + allOf: + - $ref: display-timings.yaml# # Connectivity port: diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt deleted file mode 100644 index 6b203bc4d932..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt +++ /dev/null @@ -1,50 +0,0 @@ -Generic MIPI DPI Panel -====================== - -Required properties: -- compatible: "panel-dpi" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: panel enable gpio -- reset-gpios: GPIO to control the RESET pin -- vcc-supply: phandle of regulator that will be used to enable power to the display -- backlight: phandle of the backlight device - -Required nodes: -- "panel-timing" containing video timings - (Documentation/devicetree/bindings/display/panel/display-timing.txt) -- Video port for DPI input - -Example -------- - -lcd0: display@0 { - compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; - - backlight = <&backlight>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - panel-timing { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml new file mode 100644 index 000000000000..f63870384c00 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic MIPI DPI Panel + +maintainers: + - Sam Ravnborg <sam@ravnborg.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + description: + Shall contain a panel specific compatible and "panel-dpi" + in that order. + items: + - {} + - const: panel-dpi + + data-mapping: + enum: + - rgb24 + - rgb565 + - bgr666 + description: | + Describes the media format, how the display panel is connected + to the display interface. + + backlight: true + enable-gpios: true + height-mm: true + label: true + panel-timing: true + port: true + power-supply: true + reset-gpios: true + width-mm: true + +required: + - panel-timing + - power-supply + +additionalProperties: false + +examples: + - | + panel { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "osddisplay"; + power-supply = <&vcc_supply>; + data-mapping = "rgb565"; + backlight = <&backlight>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + panel-timing { + clock-frequency = <9200000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml new file mode 100644 index 000000000000..b2e8742fd6af --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple DSI panels with a single power-supply + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the DSI panels that + requires only a single power-supply. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # Panasonic 10" WUXGA TFT LCD panel + - panasonic,vvx10f034n00 + + reg: + maxItems: 1 + description: DSI virtual channel + + backlight: true + enable-gpios: true + port: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - power-supply + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + + port { + panel: endpoint { + remote-endpoint = <<dc_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 8fe60ee2531c..393ffc6acbba 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -33,16 +33,225 @@ properties: - ampire,am-480272h3tmqw-t01h # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - ampire,am800480r3tmqwa1h + # AU Optronics Corporation 8.0" WUXGA TFT LCD panel + - auo,b080uan01 + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101aw03 + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101ean01 + # AU Optronics Corporation 10.1" WXGA TFT LCD panel + - auo,b101xtn01 # AUO B116XAK01 eDP TFT LCD panel - auo,b116xa01 + # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel + - auo,b116xw03 + # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + - auo,b133htn01 + # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel + - auo,b133xtn01 + # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel + - auo,g070vvn01 + # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + - auo,g101evn010 + # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel + - auo,g104sn02 + # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel + - auo,g133han01 + # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel + - auo,g185han01 + # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel + - auo,p320hvn03 + # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel + - auo,t215hvn01 + # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel + - avic,tm070ddh03 + # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + - boe,hv070wsa-100 + # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel + - boe,nv101wxmn51 # BOE NV140FHM-N49 14.0" FHD a-Si FT panel - boe,nv140fhmn49 + # Boe Corporation 8.0" WUXGA TFT LCD panel + - boe,tv080wum-nl0 + # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel + - cdtech,s043wq26h-ct7 + # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel + - cdtech,s070wv95-ct16 + # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel + - chunghwa,claa070wp03xg + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wa01a + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wb03 + # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. + - dataimage,scf0700c48ggu18 + # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel + - dlc,dlc1010gig + # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel + - edt,et035012dm6 + # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch + - edt,etm043080dh6gp + # Emerging Display Technology Corp. 480x272 TFT Display + - edt,etm0430g0dh6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + - edt,etm0700g0dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same as ETM0700G0DH6 but with inverted pixel clock. + - edt,etm070080bdh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same display as the ETM0700G0BDH6, but with changed hardware for the + # backlight and the touch interface. + - edt,etm070080edh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel + - evervision,vgg804821 + # Foxlink Group 5" WVGA TFT LCD panel + - foxlink,fl500wvr00-a0t + # Frida FRD350H54004 3.5" QVGA TFT LCD panel + - frida,frd350h54004 + # FriendlyELEC HD702E 800x1280 LCD panel + - friendlyarm,hd702e + # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel + - giantplus,gpg48273qs5 # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel - giantplus,gpm940b0 + # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel + - hannstar,hsd070pww1 + # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel + - hannstar,hsd100pxn1 + # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel + - hit,tx23d38vm0caa + # Innolux AT043TN24 4.3" WQVGA TFT LCD panel + - innolux,at043tn24 + # Innolux AT070TN92 7.0" WQVGA TFT LCD panel + - innolux,at070tn92 + # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel + - innolux,g070y2-l01 + # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel + - innolux,g101ice-l01 + # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel + - innolux,g121i1-l01 + # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel + - innolux,g121x1-l03 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bge + # InnoLux 15.6" WXGA TFT LCD panel + - innolux,n156bge-l21 + # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel + - innolux,zj070na-01p + # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + - koe,tx14d24vm1bpa + # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel + - koe,tx31d200vm0baa + # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel + - kyo,tcg121xglp + # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + - lemaker,bl035-rgb-002 + # LG 7" (800x480 pixels) TFT LCD panel + - lg,lb070wv8 + # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel + - lg,lp079qx1-sp0v + # LG 9.7" (2048x1536 pixels) TFT LCD panel + - lg,lp097qx1-spa1 + # LG 12.0" (1920x1280 pixels) TFT LCD panel + - lg,lp120up1 + # LG 12.9" (2560x1700 pixels) TFT LCD panel + - lg,lp129qe + # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module + - logictechno,lt161010-2nhc + # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module + - logictechno,lt161010-2nhr + # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod. + - logictechno,lt170410-2whc + # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel + - mitsubishi,aa070mc01-ca1 + # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel + - nec,nl12880bc20-05 + # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel + - nec,nl4827hc19-05b + # Netron-DY E231732 7.0" WSVGA TFT LCD panel + - netron-dy,e231732 + # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel + - neweast,wjfh116008a + # Newhaven Display International 480 x 272 TFT LCD panel + - newhaven,nhd-4.3-480272ef-atxl + # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel + - nlt,nl192108ac18-02d + # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel + - nvd,9128 + # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel + - okaya,rs800480t-7x0gp + # Olimex 4.3" TFT LCD panel + - olimex,lcd-olinuxino-43-ts + # On Tat Industrial Company 7" DPI TFT panel. + - ontat,yx700wv03 + # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel + - ortustech,com37h3m05dtc + # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel + - ortustech,com37h3m99dtc + # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel + - ortustech,com43h4m85ulc + # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel + - osddisplays,osd070t1718-19ts + # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel + - osddisplays,osd101t2045-53ts + # QiaoDian XianShi Corporation 4"3 TFT LCD panel + - qiaodian,qd43003c0-40 + # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 + - rocktech,rk101ii01d-ct + # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel + - rocktech,rk070er9427 + # Samsung 12.2" (2560x1600 pixels) TFT LCD panel + - samsung,lsn122dl01-c01 + # Samsung Electronics 10.1" WSVGA TFT LCD panel + - samsung,ltn101nt05 + # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel + - samsung,ltn140at29-301 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel - satoz,sat050at40h12r2 + # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel + - sharp,lq035q7db03 + # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel + - sharp,lq070y3dg3b + # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel + - sharp,lq101k1ly04 + # Sharp 12.3" (2400x1600 pixels) TFT LCD panel + - sharp,lq123p1jx31 # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel - sharp,ls020b1dd01d + # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel + - shelly,sca07010-bfn-lnn + # Starry 12.2" (1920x1200 pixels) TFT LCD panel + - starry,kr122ea0sra + # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel + - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel + - tianma,tm070rvhg71 + # Toshiba 8.9" WXGA (1280x768) TFT LCD panel + - toshiba,lt089ac29000 + # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch + - tpk,f07a-0102 + # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch + - tpk,f10a-0102 + # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel + # Supported are LVDS versions (-11T, -19T) and parallel ones + # (-T, -1T, -7T, -20T). + - urt,umsh-8596md-t + - urt,umsh-8596md-1t + - urt,umsh-8596md-7t + - urt,umsh-8596md-11t + - urt,umsh-8596md-19t + - urt,umsh-8596md-20t + # VXT 800x480 color TFT LCD panel + - vxt,vl050-8048nt-c01 + # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel + - winstar,wf35ltiacd backlight: true enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml new file mode 100644 index 000000000000..bd558ad7891f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -0,0 +1,227 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: panel timing bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + There are different ways of describing the timing data of a panel. The + devicetree representation corresponds to the one commonly found in datasheets + for panels. + + The parameters are defined as seen in the following illustration. + + +----------+-------------------------------------+----------+-------+ + | | ^ | | | + | | |vback_porch | | | + | | v | | | + +----------#######################################----------+-------+ + | # ^ # | | + | # | # | | + | hback # | # hfront | hsync | + | porch # | hactive # porch | len | + |<-------->#<-------+--------------------------->#<-------->|<----->| + | # | # | | + | # |vactive # | | + | # | # | | + | # v # | | + +----------#######################################----------+-------+ + | | ^ | | | + | | |vfront_porch | | | + | | v | | | + +----------+-------------------------------------+----------+-------+ + | | ^ | | | + | | |vsync_len | | | + | | v | | | + +----------+-------------------------------------+----------+-------+ + + + The following is the panel timings shown with time on the x-axis. + This matches the timing diagrams often found in data sheets. + + Active Front Sync Back + Region Porch Porch + <-----------------------><----------------><-------------><--------------> + //////////////////////| + ////////////////////// | + ////////////////////// |.................. ................ + _______________ + + Timing can be specified either as a typical value or as a tuple + of min, typ, max values. + +properties: + + clock-frequency: + description: Panel clock in Hz + + hactive: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Horizontal panel resolution in pixels + + vactive: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vertical panel resolution in pixels + + hfront-porch: + description: Horizontal front porch panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of pixels + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + hback-porch: + description: Horizontal back porch timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of pixels + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + hsync-len: + description: Horizontal sync length panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of pixels + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + vfront-porch: + description: Vertical front porch panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of lines + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + vback-porch: + description: Vertical back porch panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of lines + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + vsync-len: + description: Vertical sync length panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of lines + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + hsync-active: + description: | + Horizontal sync pulse. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + vsync-active: + description: | + Vertical sync pulse. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + de-active: + description: | + Data enable. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + pixelclk-active: + description: | + Data driving on rising or falling edge. + Use 0 to drive pixel data on falling edge and + sample data on rising edge. + Use 1 to drive pixel data on rising edge and + sample data on falling edge + enum: [0, 1] + + syncclk-active: + description: | + Drive sync on rising or sample sync on falling edge. + If not specified then the setup is as specified by pixelclk-active. + Use 0 to drive sync on falling edge and + sample sync on rising edge of pixel clock. + Use 1 to drive sync on rising edge and + sample sync on falling edge of pixel clock + enum: [0, 1] + + interlaced: + type: boolean + description: Enable interlaced mode + + doublescan: + type: boolean + description: Enable double scan mode + + doubleclk: + type: boolean + description: Enable double clock mode + +required: + - clock-frequency + - hactive + - vactive + - hfront-porch + - hback-porch + - hsync-len + - vfront-porch + - vback-porch + - vsync-len + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt deleted file mode 100644 index 0fbdab89ac3d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt +++ /dev/null @@ -1,7 +0,0 @@ -QiaoDian XianShi Corporation 4"3 TFT LCD panel - -Required properties: -- compatible: should be "qiaodian,qd43003c0-40" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt deleted file mode 100644 index cbb79ef3bfc9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt +++ /dev/null @@ -1,25 +0,0 @@ -Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel - -The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD -panel connected using a MIPI-DSI video interface. - -Required properties: - - compatible: "raydium,rm68200" - - reg: the virtual channel number of a DSI peripheral - -Optional properties: - - reset-gpios: a GPIO spec for the reset pin (active low). - - power-supply: phandle of the regulator that provides the supply voltage. - - backlight: phandle of the backlight device attached to the panel. - -Example: -&dsi { - ... - panel@0 { - compatible = "raydium,rm68200"; - reg = <0>; - reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; - power-supply = <&v1v8>; - backlight = <&pwm_backlight>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml new file mode 100644 index 000000000000..a35ba16fc000 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD + panel connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + const: raydium,rm68200 + + reg: + maxItems: 1 + description: DSI virtual channel + + backlight: true + enable-gpios: true + port: true + power-supply: true + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - power-supply + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "raydium,rm68200"; + reg = <0>; + reset-gpios = <&gpiof 15 0>; + power-supply = <&v1v8>; + backlight = <&pwm_backlight>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt deleted file mode 100644 index eb1fb9f8d1f4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt +++ /dev/null @@ -1,25 +0,0 @@ -Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Required properties: -- compatible: should be "rocktech,rk070er9427" - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Optional nodes: -- Video port for LCD panel input. - -Example: - panel { - compatible = "rocktech,rk070er9427"; - backlight = <&backlight_lcd>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt b/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt deleted file mode 100644 index dba298b43b24..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Samsung 12.2" (2560x1600 pixels) TFT LCD panel - -Required properties: -- compatible: should be "samsung,lsn122dl01-c01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt b/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt deleted file mode 100644 index ef522c6bb85f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt +++ /dev/null @@ -1,7 +0,0 @@ -Samsung Electronics 10.1" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "samsung,ltn101nt05" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt b/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt deleted file mode 100644 index e7f969d891cc..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt +++ /dev/null @@ -1,7 +0,0 @@ -Samsung Electronics 14" WXGA (1366x768) TFT LCD panel - -Required properties: -- compatible: should be "samsung,ltn140at29-301" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml new file mode 100644 index 000000000000..7a685d0428b3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e88a0-ams452ef01 + reg: true + reset-gpios: true + vdd3-supply: + description: core voltage supply + vci-supply: + description: voltage supply for analog circuits + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + reg = <0>; + + compatible = "samsung,s6e88a0-ams452ef01"; + + vdd3-supply = <&pm8916_l17>; + vci-supply = <®_vlcd_vci>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt deleted file mode 100644 index 0753f6967279..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq035q7db03" -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt deleted file mode 100644 index 95534b55ee5f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq070y3dg3b" - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- power-supply: phandle of the regulator that provides the supply voltage - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt deleted file mode 100644 index 4aff25b8dfe6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt +++ /dev/null @@ -1,7 +0,0 @@ -Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq101k1ly04" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt deleted file mode 100644 index bcb0e8a29f71..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt +++ /dev/null @@ -1,7 +0,0 @@ -Sharp 12.3" (2400x1600 pixels) TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq123p1jx31" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt b/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt deleted file mode 100644 index fc1ea9e26c94..000000000000 --- a/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt +++ /dev/null @@ -1,7 +0,0 @@ -Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "shelly,sca07010-bfn-lnn" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt b/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt deleted file mode 100644 index 1e87fe6078af..000000000000 --- a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt +++ /dev/null @@ -1,7 +0,0 @@ -Starry 12.2" (1920x1200 pixels) TFT LCD panel - -Required properties: -- compatible: should be "starry,kr122ea0sra" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt deleted file mode 100644 index eb9501a82e25..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt +++ /dev/null @@ -1,7 +0,0 @@ -Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - -Required properties: -- compatible: should be "tianma,tm070jdhg30" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt deleted file mode 100644 index b25261e63a6d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt +++ /dev/null @@ -1,29 +0,0 @@ -Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel - -Required properties: -- compatible: should be "tianma,tm070rvhg71" -- power-supply: single regulator to provide the supply voltage -- backlight: phandle of the backlight device attached to the panel - -Required nodes: -- port: LVDS port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX6Q based board - - panel: panel-lvds0 { - compatible = "tianma,tm070rvhg71"; - backlight = <&backlight_lvds>; - power-supply = <®_lvds>; - - port { - panel_in_lvds0: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt deleted file mode 100644 index 89826116628c..000000000000 --- a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt +++ /dev/null @@ -1,8 +0,0 @@ -Toshiba 8.9" WXGA (1280x768) TFT LCD panel - -Required properties: -- compatible: should be "toshiba,lt089ac29000" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt deleted file mode 100644 index a2613b9675df..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt +++ /dev/null @@ -1,8 +0,0 @@ -TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with, -800 x 480 (WVGA) LCD panel. - -Required properties: -- compatible: should be "tpk,f07a-0102" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt deleted file mode 100644 index b9d051196ba9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt +++ /dev/null @@ -1,8 +0,0 @@ -TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with, -1024 x 600 (WSVGA) LCD panel. - -Required properties: -- compatible: should be "tpk,f10a-0102" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt b/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt deleted file mode 100644 index 088a6cea5015..000000000000 --- a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt +++ /dev/null @@ -1,16 +0,0 @@ -United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel - -Supported are LVDS versions (-11T, -19T) and parallel ones -(-T, -1T, -7T, -20T). - -Required properties: -- compatible: should be one of: - "urt,umsh-8596md-t", - "urt,umsh-8596md-1t", - "urt,umsh-8596md-7t", - "urt,umsh-8596md-11t", - "urt,umsh-8596md-19t", - "urt,umsh-8596md-20t". - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt b/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt deleted file mode 100644 index b42bf06bbd99..000000000000 --- a/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt +++ /dev/null @@ -1,12 +0,0 @@ -VXT 800x480 color TFT LCD panel - -Required properties: -- compatible: should be "vxt,vl050-8048nt-c01" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt deleted file mode 100644 index 2a7e6e3ba64c..000000000000 --- a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt +++ /dev/null @@ -1,48 +0,0 @@ -Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel - -Required properties: -- compatible: should be "winstar,wf35ltiacd" -- power-supply: regulator to provide the VCC supply voltage (3.3 volts) - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Example: - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 31 63 95 127 159 191 223 255>; - default-brightness-level = <191>; - power-supply = <&bl_reg>; - }; - - bl_reg: backlight_regulator { - compatible = "regulator-fixed"; - regulator-name = "backlight-power-supply"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - panel: panel { - compatible = "winstar,wf35ltiacd", "simple-panel"; - backlight = <&backlight>; - power-supply = <&panel_reg>; - #address-cells = <1>; - #size-cells = <0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint { - remote-endpoint = <&hlcdc_panel_output>; - }; - }; - }; - - panel_reg: panel_regulator { - compatible = "regulator-fixed"; - regulator-name = "panel-power-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index 186e5e1c8fa3..d9fdb58e06b4 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -34,9 +34,11 @@ additionalProperties: false examples: - | - dsi@ff450000 { + dsi { #address-cells = <1>; #size-cells = <0>; + reg = <0xff450000 0x1000>; + panel@0 { compatible = "xinpeng,xpp055c272"; reg = <0>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt deleted file mode 100644 index 5707af89319d..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt +++ /dev/null @@ -1,19 +0,0 @@ -Rockchip DRM master device -================================ - -The Rockchip DRM master device is a virtual device needed to list all -vop devices or other display interface nodes that comprise the -graphics subsystem. - -Required properties: -- compatible: Should be "rockchip,display-subsystem" -- ports: Should contain a list of phandles pointing to display interface port - of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt - -example: - -display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; -}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml new file mode 100644 index 000000000000..ec8ae742d4da --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DRM master device + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip DRM master device is a virtual device needed to list all + vop devices or other display interface nodes that comprise the + graphics subsystem. + +properties: + compatible: + const: rockchip,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Should contain a list of phandles pointing to display interface port + of vop devices. vop definitions as defined in + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index 678776b6012a..1db608c9eef5 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -174,10 +174,6 @@ examples: }; }; - soc@1c00000 { - lcdc0: lcdc@1c0c000 { - compatible = "allwinner,sun4i-a10-lcdc"; - }; - }; + lcdc0: lcdc { }; ... diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt deleted file mode 100644 index cd5c7186890a..000000000000 --- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt +++ /dev/null @@ -1,35 +0,0 @@ -Sitronix ST7735R display panels - -This binding is for display panels using a Sitronix ST7735R controller in SPI -mode. - -Required properties: -- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" -- dc-gpios: Display data/command selection (D/CX) -- reset-gpios: Reset signal (RSTX) - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ... - - display@0{ - compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = &backlight; - }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file mode 100644 index 000000000000..0cebaaefda03 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7735R Display Panels Device Tree Bindings + +maintainers: + - David Lechner <david@lechnology.com> + +description: + This binding is for display panels using a Sitronix ST7715R or ST7735R + controller in SPI mode. + +allOf: + - $ref: panel/panel-common.yaml# + +properties: + compatible: + oneOf: + - description: + Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618) + items: + - enum: + - jianda,jd-t18003-t01 + - const: sitronix,st7735r + - description: + Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD) + items: + - enum: + - okaya,rh128128t + - const: sitronix,st7715r + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + rotation = <270>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml new file mode 100644 index 000000000000..cac61a998203 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments AM65x Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The AM65x TI Keystone Display SubSystem with two output ports and + two video planes. The first video port supports OLDI and the second + supports DPI format. The fist plane is full video plane with all + features and the second is a "lite plane" without scaling support. + +properties: + compatible: + const: ti,am65x-dss + + reg: + description: + Addresses to each DSS memory region described in the SoC's TRM. + items: + - description: common DSS register area + - description: VIDL1 light video plane + - description: VID video plane + - description: OVR1 overlay manager for vp1 + - description: OVR2 overlay manager for vp2 + - description: VP1 video port 1 + - description: VP2 video port 2 + + reg-names: + items: + - const: common + - const: vidl1 + - const: vid + - const: ovr1 + - const: ovr2 + - const: vp1 + - const: vp2 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + - description: vp2 Video Port 2 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + - const: vp2 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + ports: + type: object + description: + Ports as described in Documentation/devictree/bindings/graph.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + The DSS OLDI output port node form video port 1 + + port@1: + type: object + description: + The DSS DPI output port node from video port 2 + + required: + - "#address-cells" + - "#size-cells" + + ti,am65x-oldi-io-ctrl: + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + - maxItems: 1 + description: + phandle to syscon device node mapping OLDI IO_CTRL registers. + The mapped range should point to OLDI_DAT0_IO_CTRL, map it and + following OLDI_DAT1_IO_CTRL, OLDI_DAT2_IO_CTRL, OLDI_DAT3_IO_CTRL, + and OLDI_CLK_IO_CTRL registers. This property is needed for OLDI + interface to work. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dss: dss@04a00000 { + compatible = "ti,am65x-dss"; + reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ + <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ + <0x0 0x04a06000 0x0 0x1000>, /* vid */ + <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ + <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ + <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ + <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + reg-names = "common", "vidl1", "vid", + "ovr1", "ovr2", "vp1", "vp2"; + ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 67 1>, + <&k3_clks 216 1>, + <&k3_clks 67 2>; + clock-names = "fck", "vp1", "vp2"; + interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + oldi_out0: endpoint { + remote-endpoint = <&lcd_in0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml new file mode 100644 index 000000000000..ade9b2f513f5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments J721E Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The J721E TI Keystone Display SubSystem with four output ports and + four video planes. There is two full video planes and two "lite + planes" without scaling support. The video ports can be connected to + the SoC's DPI pins or to integrated display bridges on the SoC. + +properties: + compatible: + const: ti,j721e-dss + + reg: + items: + - description: common_m DSS Master common + - description: common_s0 DSS Shared common 0 + - description: common_s1 DSS Shared common 1 + - description: common_s2 DSS Shared common 2 + - description: VIDL1 light video plane 1 + - description: VIDL2 light video plane 2 + - description: VID1 video plane 1 + - description: VID1 video plane 2 + - description: OVR1 overlay manager for vp1 + - description: OVR2 overlay manager for vp2 + - description: OVR3 overlay manager for vp3 + - description: OVR4 overlay manager for vp4 + - description: VP1 video port 1 + - description: VP2 video port 2 + - description: VP3 video port 3 + - description: VP4 video port 4 + - description: WB Write Back + + reg-names: + items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + - const: vidl1 + - const: vidl2 + - const: vid1 + - const: vid2 + - const: ovr1 + - const: ovr2 + - const: ovr3 + - const: ovr4 + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + - const: wb + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + - description: vp2 Video Port 2 pixel clock + - description: vp3 Video Port 3 pixel clock + - description: vp4 Video Port 4 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + + interrupts: + items: + - description: common_m DSS Master common + - description: common_s0 DSS Shared common 0 + - description: common_s1 DSS Shared common 1 + - description: common_s2 DSS Shared common 2 + + interrupt-names: + items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + ports: + type: object + description: + Ports as described in Documentation/devictree/bindings/graph.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + The output port node form video port 1 + + port@1: + type: object + description: + The output port node from video port 2 + + port@2: + type: object + description: + The output port node from video port 3 + + port@3: + type: object + description: + The output port node from video port 4 + + required: + - "#address-cells" + - "#size-cells" + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dss: dss@04a00000 { + compatible = "ti,j721e-dss"; + reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */ + <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/ + <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/ + <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/ + <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */ + <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */ + <0x00 0x04a50000 0x00 0x10000>, /* vid1 */ + <0x00 0x04a60000 0x00 0x10000>, /* vid2 */ + <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */ + <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */ + <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */ + <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */ + <0x00 0x04a80000 0x00 0x10000>, /* vp1 */ + <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */ + <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */ + <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */ + <0x00 0x04af0000 0x00 0x10000>; /* wb */ + reg-names = "common_m", "common_s0", + "common_s1", "common_s2", + "vidl1", "vidl2","vid1","vid2", + "ovr1", "ovr2", "ovr3", "ovr4", + "vp1", "vp2", "vp3", "vp4", + "wb"; + clocks = <&k3_clks 152 0>, + <&k3_clks 152 1>, + <&k3_clks 152 4>, + <&k3_clks 152 9>, + <&k3_clks 152 13>; + clock-names = "fck", "vp1", "vp2", "vp3", "vp4"; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common_m", + "common_s0", + "common_s1", + "common_s2"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpi_out_0: endpoint { + remote-endpoint = <&dp_bridge_input>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml new file mode 100644 index 000000000000..385bd060ccf9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments K2G Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The K2G DSS is an ultra-light version of TI Keystone Display + SubSystem. It has only one output port and video plane. The + output is DPI. + +properties: + compatible: + const: ti,k2g-dss + + reg: + items: + - description: cfg DSS top level + - description: common DISPC common + - description: VID1 video plane 1 + - description: OVR1 overlay manager for vp1 + - description: VP1 video port 1 + + reg-names: + items: + - const: cfg + - const: common + - const: vid1 + - const: ovr1 + - const: vp1 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + port: + type: object + description: + Port as described in Documentation/devictree/bindings/graph.txt. + The DSS DPI output port node + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + dss: dss@02540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; + + power-domains = <&k2g_pds 0x2>; + + max-memory-bandwidth = <230000000>; + + port { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index 7bf1bb444812..aac617acb64f 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -37,7 +37,7 @@ Optional nodes: supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and - Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting + Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting tfp410 DVI encoder or lcd panel to lcdc [1] There is an errata about AM335x color wiring. For 16-bit color mode diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 8b5c346f23f6..34780d7535b8 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -143,7 +143,7 @@ examples: #size-cells = <2>; dma-coherent; dma-ranges; - ranges; + ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>; ti,sci-dev-id = <118>; @@ -169,16 +169,4 @@ examples: ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ }; }; - - mcasp0: mcasp@02B00000 { - dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; - dma-names = "tx", "rx"; - }; - - crypto: crypto@4E00000 { - compatible = "ti,sa2ul-crypto"; - - dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; - dma-names = "tx", "rx1", "rx2"; - }; }; diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml new file mode 100644 index 000000000000..9272d2bd8634 --- /dev/null +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/edac/dmc-520.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM DMC-520 EDAC bindings + +maintainers: + - Lei Wang <lewan@microsoft.com> + +description: |+ + DMC-520 node is defined to describe DRAM error detection and correction. + + https://static.docs.arm.com/100000/0200/corelink_dmc520_trm_100000_0200_01_en.pdf + +properties: + compatible: + items: + - const: brcm,dmc-520 + - const: arm,dmc-520 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 10 + + interrupt-names: + minItems: 1 + maxItems: 10 + items: + enum: + - ram_ecc_errc + - ram_ecc_errd + - dram_ecc_errc + - dram_ecc_errd + - failed_access + - failed_prog + - link_err + - temperature_event + - arch_fsm + - phy_request + +required: + - compatible + - reg + - interrupts + - interrupt-names + +examples: + - | + dmc0: dmc@200000 { + compatible = "brcm,dmc-520", "arm,dmc-520"; + reg = <0x200000 0x80000>; + interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>; + interrupt-names = "dram_ecc_errc", "dram_ecc_errd"; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml new file mode 100644 index 000000000000..893d81e54caa --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SPI controllers + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this + node will always be a child of an FSI CFAM node; see fsi.txt for details on + FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of + SPI controllers. + +properties: + compatible: + enum: + - ibm,fsi2spi + + reg: + items: + - description: FSI slave address + +required: + - compatible + - reg + +examples: + - | + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 4ea6a8789699..e8b99adcb1bd 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -84,31 +84,31 @@ examples: gpu_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@533000000 { + opp-533000000 { opp-hz = /bits/ 64 <533000000>; opp-microvolt = <1250000>; }; - opp@450000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-microvolt = <1150000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1125000>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; opp-microvolt = <1075000>; }; - opp@266000000 { + opp-266000000 { opp-hz = /bits/ 64 <266000000>; opp-microvolt = <1025000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <925000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <912500>; }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 36f59b3ade71..8d966f3ff3db 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -138,31 +138,31 @@ examples: gpu_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@533000000 { + opp-533000000 { opp-hz = /bits/ 64 <533000000>; opp-microvolt = <1250000>; }; - opp@450000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-microvolt = <1150000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1125000>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; opp-microvolt = <1075000>; }; - opp@266000000 { + opp-266000000 { opp-hz = /bits/ 64 <266000000>; opp-microvolt = <1025000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <925000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <912500>; }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml new file mode 100644 index 000000000000..57a240d2d026 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI FAN Control Device Tree Bindings + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: |+ + Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + core can be found in: + + https://wiki.analog.com/resources/fpga/docs/axi_fan_control + +properties: + compatible: + enum: + - adi,axi-fan-control-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + pulses-per-revolution: + description: + Value specifying the number of pulses per revolution of the controlled + FAN. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + +required: + - compatible + - reg + - clocks + - interrupts + - pulses-per-revolution + +examples: + - | + fpga_axi: fpga-axi@0 { + #address-cells = <0x2>; + #size-cells = <0x1>; + + axi_fan_control: axi-fan-control@80000000 { + compatible = "adi,axi-fan-control-1.00.a"; + reg = <0x0 0x80000000 0x10000>; + clocks = <&clk 71>; + interrupts = <0 110 0>; + pulses-per-revolution = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml new file mode 100644 index 000000000000..76985034ea73 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/adt7475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADT7475 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + +description: | + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple + PWN fan controllers. + + They support monitoring and controlling up to four fans (the ADT7490 can only + control up to three). They support reading a single on chip temperature + sensor and two off chip temperature sensors (the ADT7490 additionally + supports measuring up to three current external temperature sensors with + series resistance cancellation (SRC)). + + Datasheets: + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF + + Description taken from onsemiconductors specification sheets, with minor + rephrasing. + +properties: + compatible: + enum: + - adi,adt7473 + - adi,adt7475 + - adi,adt7476 + - adi,adt7490 + + reg: + maxItems: 1 + +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains it's configuration from the bios/bootloader. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + + "^adi,pwm-active-state$": + description: | + Integer array, represents the active state of the pwm outputs If set to 0 + the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm + uses a logic high output for 100% duty cycle. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + adi,bypass-attenuator-in0 = <1>; + adi,bypass-attenuator-in1 = <0>; + adi,pwm-active-state = <1 0 1>; + }; + }; + diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt index b428a70a7cc0..4e7f6215a453 100644 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -2,20 +2,30 @@ ltc2978 Required properties: - compatible: should contain one of: + * "lltc,ltc2972" * "lltc,ltc2974" * "lltc,ltc2975" * "lltc,ltc2977" * "lltc,ltc2978" + * "lltc,ltc2979" * "lltc,ltc2980" * "lltc,ltc3880" * "lltc,ltc3882" * "lltc,ltc3883" + * "lltc,ltc3884" * "lltc,ltc3886" * "lltc,ltc3887" + * "lltc,ltc3889" + * "lltc,ltc7880" * "lltc,ltm2987" + * "lltc,ltm4664" * "lltc,ltm4675" * "lltc,ltm4676" + * "lltc,ltm4677" + * "lltc,ltm4678" + * "lltc,ltm4680" * "lltc,ltm4686" + * "lltc,ltm4700" - reg: I2C slave address Optional properties: @@ -25,13 +35,17 @@ Optional properties: standard binding for regulators; see regulator.txt. Valid names of regulators depend on number of supplies supported per device: + * ltc2972 vout0 - vout1 * ltc2974, ltc2975 : vout0 - vout3 - * ltc2977, ltc2980, ltm2987 : vout0 - vout7 + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 * ltc2978 : vout0 - vout7 - * ltc3880, ltc3882, ltc3886 : vout0 - vout1 + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 + * ltc7880 : vout0 - vout1 * ltc3883 : vout0 - * ltm4676 : vout0 - vout1 - * ltm4686 : vout0 - vout1 + * ltm4664 : vout0 - vout1 + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 + * ltm4680, ltm4686 : vout0 - vout1 + * ltm4700 : vout0 - vout1 Example: ltc2978@5e { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml new file mode 100644 index 000000000000..a11b918e0016 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7923.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Patrick Vasseur <patrick.vasseur@c-s.fr> + +description: | + Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, + AD7918, AD7928 8 Channels ADCs. + + Specifications about the part can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7904_7914_7924.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf + +properties: + compatible: + enum: + - adi,ad7904 + - adi,ad7914 + - adi,ad7923 + - adi,ad7924 + - adi,ad7908 + - adi,ad7918 + - adi,ad7928 + + reg: + maxItems: 1 + + refin-supply: + description: | + The regulator supply for ADC reference voltage. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad7928: adc@0 { + compatible = "adi,ad7928"; + reg = <0>; + spi-max-frequency = <25000000>; + refin-supply = <&adc_vref>; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt deleted file mode 100644 index 94a9011dd860..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/max1363.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) - -The node for this driver must be a child node of a I2C controller, hence -all mandatory properties for your controller must be specified. See directory: - - Documentation/devicetree/bindings/i2c - -for more details. - -Required properties: - - compatible: Should be one of - "maxim,max1361" - "maxim,max1362" - "maxim,max1363" - "maxim,max1364" - "maxim,max1036" - "maxim,max1037" - "maxim,max1038" - "maxim,max1039" - "maxim,max1136" - "maxim,max1137" - "maxim,max1138" - "maxim,max1139" - "maxim,max1236" - "maxim,max1237" - "maxim,max1238" - "maxim,max1239" - "maxim,max11600" - "maxim,max11601" - "maxim,max11602" - "maxim,max11603" - "maxim,max11604" - "maxim,max11605" - "maxim,max11606" - "maxim,max11607" - "maxim,max11608" - "maxim,max11609" - "maxim,max11610" - "maxim,max11611" - "maxim,max11612" - "maxim,max11613" - "maxim,max11614" - "maxim,max11615" - "maxim,max11616" - "maxim,max11617" - "maxim,max11644" - "maxim,max11645" - "maxim,max11646" - "maxim,max11647" - - reg: Should contain the ADC I2C address - -Optional properties: - - vcc-supply: phandle to the regulator that provides power to the ADC. - - vref-supply: phandle to the regulator for ADC reference voltage. - - interrupts: IRQ line for the ADC. If not used the driver will use - polling. - -Example: -adc: max11644@36 { - compatible = "maxim,max11644"; - reg = <0x36>; - vref-supply = <&adc_vref>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml new file mode 100644 index 000000000000..a0ebb4680140 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1238 and similar ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Family of simple ADCs with i2c inteface and internal references. + +properties: + compatible: + enum: + - maxim,max1036 + - maxim,max1037 + - maxim,max1038 + - maxim,max1039 + - maxim,max1136 + - maxim,max1137 + - maxim,max1138 + - maxim,max1139 + - maxim,max1236 + - maxim,max1237 + - maxim,max1238 + - maxim,max1239 + - maxim,max11600 + - maxim,max11601 + - maxim,max11602 + - maxim,max11603 + - maxim,max11604 + - maxim,max11605 + - maxim,max11606 + - maxim,max11607 + - maxim,max11608 + - maxim,max11609 + - maxim,max11610 + - maxim,max11611 + - maxim,max11612 + - maxim,max11613 + - maxim,max11614 + - maxim,max11615 + - maxim,max11616 + - maxim,max11617 + - maxim,max11644 + - maxim,max11645 + - maxim,max11646 + - maxim,max11647 + + reg: + maxItems: 1 + + vcc-supply: true + vref-supply: + description: Optional external reference. If not supplied, internal + reference will be used. + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@36 { + compatible = "maxim,max1238"; + reg = <0x36>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml new file mode 100644 index 000000000000..48377549c39a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1363.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1363 and similar ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Family of ADCs with i2c inteface, internal references and threshold + monitoring. + +properties: + compatible: + enum: + - maxim,max1361 + - maxim,max1362 + - maxim,max1363 + - maxim,max1364 + + reg: + maxItems: 1 + + vcc-supply: true + vref-supply: + description: Optional external reference. If not supplied, internal + reference will be used. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@36 { + compatible = "maxim,max1363"; + reg = <0x36>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt index eb939fe77836..ef8eeec1a997 100644 --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt @@ -6,6 +6,7 @@ Required properties: - compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC. - reg: specifies physical base address and size of the registers. - interrupts: Contain the ADC interrupt with flags for falling edge. +- resets : phandle to the reset control for this device. Optional properties: - clocks: phandle of ADC reference clock, in case the clock is not @@ -21,4 +22,5 @@ adc: adc@f000c000 { reg = <0xf000c000 0x8>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index f46de17c0878..cc3c8ea6a894 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -123,7 +123,7 @@ examples: samsung,syscon-phandle = <&pmu_system_controller>; /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { + ncp15wb473 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt deleted file mode 100644 index 8de933146771..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ /dev/null @@ -1,149 +0,0 @@ -STMicroelectronics STM32 ADC device driver - -STM32 ADC is a successive approximation analog-to-digital converter. -It has several multiplexed input channels. Conversions can be performed -in single, continuous, scan or discontinuous mode. Result of the ADC is -stored in a left-aligned or right-aligned 32-bit data register. -Conversions can be launched in software or using hardware triggers. - -The analog watchdog feature allows the application to detect if the input -voltage goes beyond the user-defined, higher or lower thresholds. - -Each STM32 ADC block can have up to 3 ADC instances. - -Each instance supports two contexts to manage conversions, each one has its -own configurable sequence and trigger: -- regular conversion can be done in sequence, running in background -- injected conversions have higher priority, and so have the ability to - interrupt regular conversion sequence (either triggered in SW or HW). - Regular sequence is resumed, in case it has been interrupted. - -Contents of a stm32 adc root node: ------------------------------------ -Required properties: -- compatible: Should be one of: - "st,stm32f4-adc-core" - "st,stm32h7-adc-core" - "st,stm32mp1-adc-core" -- reg: Offset and length of the ADC block register set. -- interrupts: One or more interrupts for ADC block. Some parts like stm32f4 - and stm32h7 share a common ADC interrupt line. stm32mp1 has two separate - interrupt lines, one for each ADC within ADC block. -- clocks: Core can use up to two clocks, depending on part used: - - "adc" clock: for the analog circuitry, common to all ADCs. - It's required on stm32f4. - It's optional on stm32h7. - - "bus" clock: for registers access, common to all ADCs. - It's not present on stm32f4. - It's required on stm32h7. -- clock-names: Must be "adc" and/or "bus" depending on part used. -- interrupt-controller: Identifies the controller node as interrupt-parent -- vdda-supply: Phandle to the vdda input analog voltage. -- vref-supply: Phandle to the vref input analog reference voltage. -- #interrupt-cells = <1>; -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- A pinctrl state named "default" for each ADC channel may be defined to set - inX ADC pins in mode of operation for analog input on external pin. -- booster-supply: Phandle to the embedded booster regulator that can be used - to supply ADC analog input switches on stm32h7 and stm32mp1. -- vdd-supply: Phandle to the vdd input voltage. It can be used to supply ADC - analog input switches on stm32mp1. -- st,syscfg: Phandle to system configuration controller. It can be used to - control the analog circuitry on stm32mp1. -- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog - circuitry. - -Contents of a stm32 adc child node: ------------------------------------ -An ADC block node should contain at least one subnode, representing an -ADC instance available on the machine. - -Required properties: -- compatible: Should be one of: - "st,stm32f4-adc" - "st,stm32h7-adc" - "st,stm32mp1-adc" -- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). -- clocks: Input clock private to this ADC instance. It's required only on - stm32f4, that has per instance clock input for registers access. -- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or - 2 for adc@200). -- st,adc-channels: List of single-ended channels muxed for this ADC. - It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered - from 0 to 15 or 19 (resp. for in0..in15 or in0..in19). -- st,adc-diff-channels: List of differential channels muxed for this ADC. - Depending on part used, some channels can be configured as differential - instead of single-ended (e.g. stm32h7). List here positive and negative - inputs pairs as <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered - from 0 to 19 on stm32h7) - Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is required. - Both properties can be used together. Some channels can be used as - single-ended and some other ones as differential (mixed). But channels - can't be configured both as single-ended and differential (invalid). -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in - Documentation/devicetree/bindings/iio/iio-bindings.txt - -Optional properties: -- dmas: Phandle to dma channel for this ADC instance. - See ../../dma/dma.txt for details. -- dma-names: Must be "rx" when dmas property is being used. -- assigned-resolution-bits: Resolution (bits) to use for conversions. Must - match device available resolutions: - * can be 6, 8, 10 or 12 on stm32f4 - * can be 8, 10, 12, 14 or 16 on stm32h7 - Default is maximum resolution if unset. -- st,min-sample-time-nsecs: Minimum sampling time in nanoseconds. - Depending on hardware (board) e.g. high/low analog input source impedance, - fine tune of ADC sampling time may be recommended. - This can be either one value or an array that matches 'st,adc-channels' list, - to set sample time resp. for all channels, or independently for each channel. - -Example: - adc: adc@40012000 { - compatible = "st,stm32f4-adc-core"; - reg = <0x40012000 0x400>; - interrupts = <18>; - clocks = <&rcc 0 168>; - clock-names = "adc"; - vref-supply = <®_vref>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&adc3_in8_pin>; - - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - compatible = "st,stm32f4-adc"; - #io-channel-cells = <1>; - reg = <0x0>; - clocks = <&rcc 0 168>; - interrupt-parent = <&adc>; - interrupts = <0>; - st,adc-channels = <8>; - dmas = <&dma2 0 0 0x400 0x0>; - dma-names = "rx"; - assigned-resolution-bits = <8>; - }; - ... - other adc child nodes follow... - }; - -Example to setup: -- channel 1 as single-ended -- channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) - - adc: adc@40022000 { - compatible = "st,stm32h7-adc-core"; - ... - adc1: adc@0 { - compatible = "st,stm32h7-adc"; - ... - st,adc-channels = <1>; - st,adc-diff-channels = <2 6>, <3 7>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml new file mode 100644 index 000000000000..933ba37944d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -0,0 +1,458 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 ADC bindings + +description: | + STM32 ADC is a successive approximation analog-to-digital converter. + It has several multiplexed input channels. Conversions can be performed + in single, continuous, scan or discontinuous mode. Result of the ADC is + stored in a left-aligned or right-aligned 32-bit data register. + Conversions can be launched in software or using hardware triggers. + + The analog watchdog feature allows the application to detect if the input + voltage goes beyond the user-defined, higher or lower thresholds. + + Each STM32 ADC block can have up to 3 ADC instances. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + enum: + - st,stm32f4-adc-core + - st,stm32h7-adc-core + - st,stm32mp1-adc-core + + reg: + maxItems: 1 + + interrupts: + description: | + One or more interrupts for ADC block, depending on part used: + - stm32f4 and stm32h7 share a common ADC interrupt line. + - stm32mp1 has two separate interrupt lines, one for each ADC within + ADC block. + minItems: 1 + maxItems: 2 + + clocks: + description: | + Core can use up to two clocks, depending on part used: + - "adc" clock: for the analog circuitry, common to all ADCs. + It's required on stm32f4. + It's optional on stm32h7 and stm32mp1. + - "bus" clock: for registers access, common to all ADCs. + It's not present on stm32f4. + It's required on stm32h7 and stm32mp1. + + clock-names: true + + st,max-clk-rate-hz: + description: + Allow to specify desired max clock rate used by analog circuitry. + + vdda-supply: + description: Phandle to the vdda input analog voltage. + + vref-supply: + description: Phandle to the vref input analog reference voltage. + + booster-supply: + description: + Phandle to the embedded booster regulator that can be used to supply ADC + analog input switches on stm32h7 and stm32mp1. + + vdd-supply: + description: + Phandle to the vdd input voltage. It can be used to supply ADC analog + input switches on stm32mp1. + + st,syscfg: + description: + Phandle to system configuration controller. It can be used to control the + analog circuitry on stm32mp1. + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-adc-core + + then: + properties: + clocks: + maxItems: 1 + + clock-names: + const: adc + + interrupts: + items: + - description: interrupt line common for all ADCs + + st,max-clk-rate-hz: + minimum: 600000 + maximum: 36000000 + default: 36000000 + + booster-supply: false + + vdd-supply: false + + st,syscfg: false + + - if: + properties: + compatible: + contains: + const: st,stm32h7-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interrupt line common for all ADCs + + st,max-clk-rate-hz: + minimum: 120000 + maximum: 36000000 + default: 36000000 + + vdd-supply: false + + st,syscfg: false + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interrupt line for ADC1 + - description: interrupt line for ADC2 + + st,max-clk-rate-hz: + minimum: 120000 + maximum: 36000000 + default: 36000000 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vdda-supply + - vref-supply + - interrupt-controller + - '#interrupt-cells' + - '#address-cells' + - '#size-cells' + +patternProperties: + "^adc@[0-9]+$": + type: object + description: + An ADC block node should contain at least one subnode, representing an + ADC instance available on the machine. + + properties: + compatible: + enum: + - st,stm32f4-adc + - st,stm32h7-adc + - st,stm32mp1-adc + + reg: + description: | + Offset of ADC instance in ADC block. Valid values are: + - 0x0: ADC1 + - 0x100: ADC2 + - 0x200: ADC3 (stm32f4 only) + maxItems: 1 + + '#io-channel-cells': + const: 1 + + interrupts: + description: | + IRQ Line for the ADC instance. Valid values are: + - 0 for adc@0 + - 1 for adc@100 + - 2 for adc@200 (stm32f4 only) + maxItems: 1 + + clocks: + description: + Input clock private to this ADC instance. It's required only on + stm32f4, that has per instance clock input for registers access. + maxItems: 1 + + dmas: + description: RX DMA Channel + maxItems: 1 + + dma-names: + const: rx + + assigned-resolution-bits: + description: | + Resolution (bits) to use for conversions: + - can be 6, 8, 10 or 12 on stm32f4 + - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + st,adc-channels: + description: | + List of single-ended channels muxed for this ADC. It can have up to: + - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 + - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and + stm32mp1. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + st,adc-diff-channels: + description: | + List of differential channels muxed for this ADC. Some channels can + be configured as differential instead of single-ended on stm32h7 and + on stm32mp1. Positive and negative inputs pairs are listed: + <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19. + + Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is + required. Both properties can be used together. Some channels can be + used as single-ended and some other ones as differential (mixed). But + channels can't be configured both as single-ended and differential. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "vinp" indicates positive input number + minimum: 0 + maximum: 19 + - description: | + "vinn" indicates negative input number + minimum: 0 + maximum: 19 + + st,min-sample-time-nsecs: + description: + Minimum sampling time in nanoseconds. Depending on hardware (board) + e.g. high/low analog input source impedance, fine tune of ADC + sampling time may be recommended. This can be either one value or an + array that matches "st,adc-channels" and/or "st,adc-diff-channels" + list, to set sample time resp. for all channels, or independently for + each channel. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-adc + + then: + properties: + reg: + enum: + - 0x0 + - 0x100 + - 0x200 + + interrupts: + minimum: 0 + maximum: 2 + + assigned-resolution-bits: + enum: [6, 8, 10, 12] + default: 12 + + st,adc-channels: + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 15 + + st,adc-diff-channels: false + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 16 + items: + minimum: 80 + + required: + - clocks + + - if: + properties: + compatible: + contains: + enum: + - st,stm32h7-adc + - st,stm32mp1-adc + + then: + properties: + reg: + enum: + - 0x0 + - 0x100 + + interrupts: + minimum: 0 + maximum: 1 + + assigned-resolution-bits: + enum: [8, 10, 12, 14, 16] + default: 16 + + st,adc-channels: + minItems: 1 + maxItems: 20 + items: + minimum: 0 + maximum: 19 + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 20 + items: + minimum: 40 + + additionalProperties: false + + anyOf: + - required: + - st,adc-channels + - required: + - st,adc-diff-channels + + required: + - compatible + - reg + - interrupts + - '#io-channel-cells' + +examples: + - | + // Example 1: with stm32f429, ADC1, single-ended channel 8 + adc123: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 168>; + clock-names = "adc"; + st,max-clk-rate-hz = <36000000>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc123>; + interrupts = <0>; + st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + assigned-resolution-bits = <8>; + }; + // ... + // other adc child nodes follow... + }; + + - | + // Example 2: with stm32mp157c to setup ADC1 with: + // - channels 0 & 1 as single-ended + // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc12: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + booster-supply = <&booster>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + st,syscfg = <&syscfg>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc12>; + interrupts = <0>; + st,adc-channels = <0 1>; + st,adc-diff-channels = <2 6>, <3 7>; + st,min-sample-time-nsecs = <5000>; + dmas = <&dmamux1 9 0x400 0x05>; + dma-names = "rx"; + }; + // ... + // other adc child node follow... + }; + +... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml new file mode 100644 index 000000000000..1c6d49685e9f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HMC425A 6-bit Digital Step Attenuator + +maintainers: +- Michael Hennerich <michael.hennerich@analog.com> +- Beniamin Bia <beniamin.bia@analog.com> + +description: | + Digital Step Attenuator IIO device with gpio interface. + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + +properties: + compatible: + enum: + - adi,hmc425a + + vcc-supply: true + + ctrl-gpios: + description: + Must contain an array of 6 GPIO specifiers, referring to the GPIO pins + connected to the control pins V1-V6. + minItems: 6 + maxItems: 6 + +required: + - compatible + - ctrl-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + gpio_hmc425a: hmc425a { + compatible = "adi,hmc425a"; + ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>, + <&gpio 39 GPIO_ACTIVE_HIGH>, + <&gpio 38 GPIO_ACTIVE_HIGH>, + <&gpio 37 GPIO_ACTIVE_HIGH>, + <&gpio 36 GPIO_ACTIVE_HIGH>, + <&gpio 35 GPIO_ACTIVE_HIGH>; + vcc-supply = <&foo>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt deleted file mode 100644 index f4320595b851..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Atlas Scientific EC-SM OEM sensor - -http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf - -Required properties: - - - compatible: must be "atlas,ec-sm" - - reg: the I2C address of the sensor - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -atlas@64 { - compatible = "atlas,ec-sm"; - reg = <0x64>; - interrupt-parent = <&gpio1>; - interrupts = <16 2>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt deleted file mode 100644 index af1f5a9aa4da..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Atlas Scientific ORP-SM OEM sensor - -https://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf - -Required properties: - - - compatible: must be "atlas,orp-sm" - - reg: the I2C address of the sensor - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -atlas@66 { - compatible = "atlas,orp-sm"; - reg = <0x66>; - interrupt-parent = <&gpio1>; - interrupts = <16 2>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt deleted file mode 100644 index 79d90f060327..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Atlas Scientific pH-SM OEM sensor - -http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf - -Required properties: - - - compatible: must be "atlas,ph-sm" - - reg: the I2C address of the sensor - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -atlas@65 { - compatible = "atlas,ph-sm"; - reg = <0x65>; - interrupt-parent = <&gpio1>; - interrupts = <16 2>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml new file mode 100644 index 000000000000..edcd2904d50e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atlas Scientific OEM sensors + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + Atlas Scientific OEM sensors connected via I2C + + Datasheets: + http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf + +properties: + compatible: + enum: + - atlas,do-sm + - atlas,ec-sm + - atlas,orp-sm + - atlas,ph-sm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + atlas@66 { + compatible = "atlas,orp-sm"; + reg = <0x66>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml new file mode 100644 index 000000000000..d9c25cf4b92f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5770R DAC device driver + +maintainers: + - Mircea Caprioru <mircea.caprioru@analog.com> + +description: | + Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf + +properties: + compatible: + enum: + - adi,ad5770r + + reg: + maxItems: 1 + + avdd-supply: + description: + AVdd voltage supply. Represents two different supplies in the datasheet + that are in fact the same. + + iovdd-supply: + description: + Voltage supply for the chip interface. + + vref-supply: + description: Specify the voltage of the external reference used. + Available reference options are 1.25 V or 2.5 V. If no + external reference declared then the device will use the + internal reference of 1.25 V. + + adi,external-resistor: + description: Specify if an external 2.5k ohm resistor is used. If not + specified the device will use an internal 2.5k ohm resistor. + The precision resistor is used for reference current generation. + type: boolean + + reset-gpios: + description: GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + maxItems: 1 + + channel0: + description: Represents an external channel which are + connected to the DAC. Channel 0 can act both as a current + source and sink. + type: object + + properties: + num: + description: This represents the channel number. + items: + const: 0 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/int32-array + - items: + - enum: [0 300000] + - enum: [-60000 0] + - enum: [-60000 300000] + + channel1: + description: Represents an external channel which are + connected to the DAC. + type: object + + properties: + num: + description: This represents the channel number. + items: + const: 1 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - enum: [0 140000] + - enum: [0 250000] + + channel2: + description: Represents an external channel which are + connected to the DAC. + type: object + + properties: + num: + description: This represents the channel number. + items: + const: 2 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - enum: [0 140000] + - enum: [0 250000] + +patternProperties: + "^channel@([3-5])$": + type: object + description: Represents the external channels which are connected to the DAC. + properties: + num: + description: This represents the channel number. + items: + minimum: 3 + maximum: 5 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - enum: [0 45000] + - enum: [0 100000] + +required: +- reg +- diff-channels +- channel0 +- channel1 +- channel2 +- channel3 +- channel4 +- channel5 + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5770r@0 { + compatible = "ad5770r"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + adi,external-resistor; + reset-gpios = <&gpio 22 0>; + + channel@0 { + num = <0>; + adi,range-microamp = <(-60000) 300000>; + }; + + channel@1 { + num = <1>; + adi,range-microamp = <0 140000>; + }; + + channel@2 { + num = <2>; + adi,range-microamp = <0 55000>; + }; + + channel@3 { + num = <3>; + adi,range-microamp = <0 45000>; + }; + + channel@4 { + num = <4>; + adi,range-microamp = <0 45000>; + }; + + channel@5 { + num = <5>; + adi,range-microamp = <0 45000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt index e0d5fea33031..338c3220f01a 100644 --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt +++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt @@ -1,4 +1,4 @@ -Linear Technology LTC2632 DAC device driver +Linear Technology LTC2632/2636 DAC Required properties: - compatible: Has to contain one of the following: @@ -8,6 +8,12 @@ Required properties: lltc,ltc2632-h12 lltc,ltc2632-h10 lltc,ltc2632-h8 + lltc,ltc2636-l12 + lltc,ltc2636-l10 + lltc,ltc2636-l8 + lltc,ltc2636-h12 + lltc,ltc2636-h10 + lltc,ltc2636-h8 Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt apply. In particular, "reg" and "spi-max-frequency" properties must be given. diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index c5ee8a20af9f..f2f64749e818 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -4,6 +4,7 @@ http://www.invensense.com/mems/gyro/mpu6050.html Required properties: - compatible : should be one of + "invensense,mpu6000" "invensense,mpu6050" "invensense,mpu6500" "invensense,mpu6515" @@ -11,7 +12,11 @@ Required properties: "invensense,mpu9250" "invensense,mpu9255" "invensense,icm20608" + "invensense,icm20609" + "invensense,icm20689" "invensense,icm20602" + "invensense,icm20690" + "invensense,iam20680" - reg : the I2C address of the sensor - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml new file mode 100644 index 000000000000..f671edda6641 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3010 sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3010"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml new file mode 100644 index 000000000000..497300239d93 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/dynaimage,al3320a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3320A sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3320a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3320a"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml new file mode 100644 index 000000000000..12aa16f24772 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Proximity and ambient light sensor with IR LED for the proximity + sensing and an analog output for light intensity. The ambient light + sensor output is not available on the GP2AP002S00F variant. + +properties: + compatible: + enum: + - sharp,gp2ap002a00f + - sharp,gp2ap002s00f + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: an interrupt for proximity, usually a GPIO line + + vdd-supply: + description: VDD power supply a phandle to a regulator + + vio-supply: + description: VIO power supply a phandle to a regulator + + io-channels: + maxItems: 1 + description: ALSOUT ADC channel to read the ambient light + + io-channel-names: + const: alsout + + sharp,proximity-far-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "far" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "far away" object in front of the sensor. + + sharp,proximity-close-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "close" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "close" object in front of the sensor. + +required: + - compatible + - reg + - interrupts + - sharp,proximity-far-hysteresis + - sharp,proximity-close-hysteresis + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd_regulator>; + vio-supply = <&vio_regulator>; + io-channels = <&adc_channel>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml index 4e80ea7c1475..8afbac24c34e 100644 --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml @@ -51,6 +51,24 @@ properties: the time between two interrupts is measured in the driver. maxItems: 1 + power-gpios: + description: + Definition of the GPIO for power management of connected peripheral + (output). + This GPIO can be used by the external hardware for power management. + When the device gets suspended it's switched off and when it resumes + it's switched on again. After some period of inactivity the driver + get suspended automatically (autosuspend feature). + maxItems: 1 + + startup-time-ms: + description: + This is the startup time the device needs after a resume to be up and + running. + minimum: 0 + maximum: 1000 + default: 100 + required: - compatible - trig-gpios diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt index ef2ae729718f..921172f689b8 100644 --- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt +++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt @@ -5,6 +5,7 @@ Required properties: * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board * "cypress,midas-touchkey" - for the touchkey found on midas boards * "cypress,aries-touchkey" - for the touchkey found on aries boards + * "coreriver,tc360-touchkey" - for the Coreriver TouchCore 360 touchkey - reg: I2C address of the chip. - interrupts: interrupt to which the chip is connected (see interrupt binding[0]). diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt index dc194b2c151a..cdcaa3f52d25 100644 --- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt +++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt @@ -1,9 +1,10 @@ -Ilitek ILI210x/ILI2117/ILI251x touchscreen controller +Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Required properties: - compatible: ilitek,ili210x for ILI210x ilitek,ili2117 for ILI2117 + ilitek,ili2120 for ILI2120 ilitek,ili251x for ILI251x - reg: The I2C address of the device diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index d7c3262b2494..c99ed3934d7e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -62,7 +62,7 @@ required: examples: - | - i2c@00000000 { + i2c { #address-cells = <1>; #size-cells = <0>; gt928@5d { diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt index c864a46cddcf..f5021214edec 100644 --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt @@ -1,7 +1,7 @@ Texas Instruments TWL family (twl4030) pwrbutton module This module is part of the TWL4030. For more details about the whole -chip see Documentation/devicetree/bindings/mfd/twl-familly.txt. +chip see Documentation/devicetree/bindings/mfd/twl-family.txt. This module provides a simple power button event via an Interrupt. diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml new file mode 100644 index 000000000000..c8861cbbb8b5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson-3 HyperTransport Interrupt Controller + +maintainers: + - Jiaxun Yang <jiaxun.yang@flygoat.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +description: | + This interrupt controller is found in the Loongson-3 family of chips to transmit + interrupts from PCH PIC connected on HyperTransport bus. + +properties: + compatible: + const: loongson,htpic-1.0 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + description: | + Four parent interrupts that receive chained interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + htintc: interrupt-controller@1fb000080 { + compatible = "loongson,htintc-1.0"; + reg = <0xfb000080 0x40>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&liointc>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <25 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml new file mode 100644 index 000000000000..9c6b91fee477 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson Local I/O Interrupt Controller + +maintainers: + - Jiaxun Yang <jiaxun.yang@flygoat.com> + +description: | + This interrupt controller is found in the Loongson-3 family of chips as the primary + package interrupt controller which can route local I/O interrupt to interrupt lines + of cores. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - const: loongson,liointc-1.0 + - const: loongson,liointc-1.0a + + reg: + maxItems: 1 + + interrupt-controller: true + + interrupts: + description: + Interrupt source of the CPU interrupts. + minItems: 1 + maxItems: 4 + + interrupt-names: + description: List of names for the parent interrupts. + items: + - const: int0 + - const: int1 + - const: int2 + - const: int3 + minItems: 1 + maxItems: 4 + + '#interrupt-cells': + const: 2 + + 'loongson,parent_int_map': + description: | + This property points how the children interrupts will be mapped into CPU + interrupt lines. Each cell refers to a parent interrupt line from 0 to 3 + and each bit in the cell refers to a children interrupt fron 0 to 31. + If a CPU interrupt line didn't connected with liointc, then keep it's + cell with zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 4 + maxItems: 4 + + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - 'loongson,parent_int_map' + + +examples: + - | + iointc: interrupt-controller@3ff01400 { + compatible = "loongson,liointc-1.0"; + reg = <0x3ff01400 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>; + interrupt-names = "int0", "int1"; + + loongson,parent_int_map = <0xf0ffffff>, /* int0 */ + <0x0f000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + + }; + +... diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index d97d099b87e5..c60b994fe116 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -85,7 +85,7 @@ properties: # LED will act as a back-light, controlled by the framebuffer system - backlight # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.txt) + # Documentation/devicetree/bindings/leds/leds-gpio.yaml) - default-on # LED "double" flashes at a load average based rate - heartbeat diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt index cf1ea403ba7a..c7af6f70a97b 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.txt +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a single LED. The register bit LEDs appear as children to the syscon device, with the proper compatible string. For the syscon bindings see: -Documentation/devicetree/bindings/mfd/syscon.txt +Documentation/devicetree/bindings/mfd/syscon.yaml Each LED is represented as a sub-node of the syscon device. Each node's name represents the name of the corresponding LED. diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml new file mode 100644 index 000000000000..75d5d97305e1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner sunxi Message Box + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: | + The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a + two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt + is raised for received messages, but software must poll to know when a + transmitted message has been acknowledged by the remote user. Each FIFO can + hold four 32-bit messages; when a FIFO is full, clients must wait before + attempting more transmissions. + + Refer to ./mailbox.txt for generic information about mailbox device-tree + bindings. + +properties: + compatible: + oneOf: + - items: + - enum: + - allwinner,sun8i-a83t-msgbox + - allwinner,sun8i-h3-msgbox + - allwinner,sun9i-a80-msgbox + - allwinner,sun50i-a64-msgbox + - allwinner,sun50i-h6-msgbox + - const: allwinner,sun6i-a31-msgbox + - const: allwinner,sun6i-a31-msgbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: bus clock + + resets: + maxItems: 1 + description: bus reset + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + description: first cell is the channel number (0-7) + +required: + - compatible + - reg + - clocks + - resets + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt index 9c43357c5924..31486c9f6443 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt @@ -23,6 +23,8 @@ Required properties: be included together with SoC specific compatible. There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu" compatible to support it. + To communicate with i.MX8 SCU, "fsl,imx8-mu-scu" could be + used for fast IPC - reg : Should contain the registers location and length - interrupts : Interrupt number. The interrupt specifier format depends on the interrupt controller parent. diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt index 7b13787ab13d..0b5b2a6bcc48 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt @@ -14,13 +14,11 @@ Required properties: - interrupts: The interrupt signal from the GCE block - clock: Clocks according to the common clock binding - clock-names: Must be "gce" to stand for GCE clock -- #mbox-cells: Should be 3. - <&phandle channel priority atomic_exec> +- #mbox-cells: Should be 2. + <&phandle channel priority> phandle: Label name of a gce node. channel: Channel of mailbox. Be equal to the thread id of GCE. priority: Priority of GCE thread. - atomic_exec: GCE processing continuous packets of commands in atomic - way. Required properties for a client device: - mboxes: Client use mailbox to communicate with GCE, it should have this @@ -54,8 +52,8 @@ Example for a client device: mmsys: clock-controller@14000000 { compatible = "mediatek,mt8173-mmsys"; - mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, - <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>, + <&gce 1 CMDQ_THR_PRIO_LOWEST>; mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF CMDQ_EVENT_MUTEX1_STREAM_EOF>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 9af873b43acd..8453ee340b9f 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -33,24 +33,40 @@ properties: maxItems: 1 clocks: - minItems: 2 - maxItems: 3 - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + oneOf: + - items: + - description: The CSI interface clock + - description: The CSI DRAM clock + + - items: + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: - minItems: 2 - maxItems: 3 - items: - - const: bus - - const: isp - - const: ram + oneOf: + - items: + - const: bus + - const: ram + + - items: + - const: bus + - const: isp + - const: ram resets: maxItems: 1 + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + # See ./video-interfaces.txt for details port: type: object diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml new file mode 100644 index 000000000000..75196d11da58 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83T DE2 Rotate Device Tree Bindings + +maintainers: + - Jernej Skrabec <jernej.skrabec@siol.net> + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: |- + The Allwinner A83T and A64 have a rotation core used for + rotating and flipping images. + +properties: + compatible: + oneOf: + - const: allwinner,sun8i-a83t-de2-rotate + - items: + - const: allwinner,sun50i-a64-de2-rotate + - const: allwinner,sun8i-a83t-de2-rotate + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Rotate interface clock + - description: Rotate module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-de2.h> + #include <dt-bindings/reset/sun8i-de2.h> + + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 2e40f700e84f..8707df613f6c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -17,7 +17,11 @@ description: |- properties: compatible: - const: allwinner,sun8i-h3-deinterlace + oneOf: + - const: allwinner,sun8i-h3-deinterlace + - items: + - const: allwinner,sun50i-a64-deinterlace + - const: allwinner,sun8i-h3-deinterlace reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt index ce2894506e1f..d2ca32512272 100644 --- a/Documentation/devicetree/bindings/media/aspeed-video.txt +++ b/Documentation/devicetree/bindings/media/aspeed-video.txt @@ -1,11 +1,12 @@ * Device tree bindings for Aspeed Video Engine -The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can +The Video Engine (VE) embedded in the Aspeed AST2400/2500/2600 SOCs can capture and compress video data from digital or analog sources. Required properties: - compatible: "aspeed,ast2400-video-engine" or - "aspeed,ast2500-video-engine" + "aspeed,ast2500-video-engine" or + "aspeed,ast2600-video-engine" - reg: contains the offset and length of the VE memory region - clocks: clock specifiers for the syscon clocks associated with the VE (ordering must match the clock-names property) diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml new file mode 100644 index 000000000000..32d6b693274f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/imx219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor + +maintainers: + - Dave Stevenson <dave.stevenson@raspberrypi.com> + +description: |- + The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor + with an active array size of 3280H x 2464V. It is programmable through + I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet. + Image data is sent through MIPI CSI-2, which is configured as either 2 or + 4 data lanes. + +properties: + compatible: + const: sony,imx219 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + VDIG-supply: + description: + Digital I/O voltage supply, 1.8 volts + + VANA-supply: + description: + Analog voltage supply, 2.8 volts + + VDDL-supply: + description: + Digital core voltage supply, 1.2 volts + + reset-gpios: + description: |- + Reference to the GPIO connected to the xclr pin, if any. + Must be released (set high) after all supplies are applied. + + # See ../video-interfaces.txt for more details + port: + type: object + properties: + endpoint: + type: object + properties: + data-lanes: + description: |- + The sensor supports either two-lane, or four-lane operation. + If this property is omitted four-lane operation is assumed. + For two-lane operation the property must be set to <1 2>. + items: + - const: 1 + - const: 2 + + clock-noncontinuous: + type: boolean + description: |- + MIPI CSI-2 clock is non-continuous if this property is present, + otherwise it's continuous. + + link-frequencies: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-array + description: + Allowed data bus frequencies. + + required: + - link-frequencies + +required: + - compatible + - reg + - clocks + - VANA-supply + - VDIG-supply + - VDDL-supply + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&imx219_clk>; + VANA-supply = <&imx219_vana>; /* 2.8v */ + VDIG-supply = <&imx219_vdig>; /* 1.8v */ + VDDL-supply = <&imx219_vddl>; /* 1.2v */ + + port { + imx219_0: endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index 8c0fc1a26bf0..6c88ce858d08 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -5,38 +5,150 @@ The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. Required Properties: -- compatible: value must be "ti,tvp5150" -- reg: I2C slave address +==================== +- compatible: Value must be "ti,tvp5150". +- reg: I2C slave address. Optional Properties: -- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any. -- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any. +==================== +- pdn-gpios: Phandle for the GPIO connected to the PDN pin, if any. +- reset-gpios: Phandle for the GPIO connected to the RESETB pin, if any. -The device node must contain one 'port' child node for its digital output -video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. +The device node must contain one 'port' child node per device physical input +and output port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes +are numbered as follows -Required Endpoint Properties for parallel synchronization: + Name Type Port + -------------------------------------- + AIP1A sink 0 + AIP1B sink 1 + Y-OUT src 2 -- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH). -- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH). -- field-even-active: field signal level during the even field data - transmission. Must be <0>. +The device node must contain at least one sink port and the src port. Each input +port must be linked to an endpoint defined in [1]. The port/connector layout is +as follows -If none of hsync-active, vsync-active and field-even-active is specified, -the endpoint is assumed to use embedded BT.656 synchronization. +tvp-5150 port@0 (AIP1A) + endpoint@0 -----------> Comp0-Con port + endpoint@1 ------+----> Svideo-Con port +tvp-5150 port@1 (AIP1B) | + endpoint@1 ------+ + endpoint@0 -----------> Comp1-Con port +tvp-5150 port@2 + endpoint (video bitstream output at YOUT[0-7] parallel bus) -Example: +Required Endpoint Properties for parallel synchronization on output port: +========================================================================= + +- hsync-active: Active state of the HSYNC signal. Must be <1> (HIGH). +- vsync-active: Active state of the VSYNC signal. Must be <1> (HIGH). +- field-even-active: Field signal level during the even field data + transmission. Must be <0>. + +Note: Do not specify any of these properties if you want to use the embedded + BT.656 synchronization. + +Optional Connector Properties: +============================== + +- sdtv-standards: Set the possible signals to which the hardware tries to lock + instead of using the autodetection mechnism. Please look at + [1] for more information. + +[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt. + +Example - three input sources: +#include <dt-bindings/display/sdtv-standards.h> + +comp_connector_0 { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */ + + port { + composite0_to_tvp5150: endpoint { + remote-endpoint = <&tvp5150_to_composite0>; + }; + }; +}; + +comp_connector_1 { + compatible = "composite-video-connector"; + label = "Composite1"; + sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */ + + port { + composite1_to_tvp5150: endpoint { + remote-endpoint = <&tvp5150_to_composite1>; + }; + }; +}; + +svideo_connector { + compatible = "svideo-connector"; + label = "S-Video"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + svideo_luma_to_tvp5150: endpoint@0 { + reg = <0>; + remote-endpoint = <&tvp5150_to_svideo_luma>; + }; + + svideo_chroma_to_tvp5150: endpoint@1 { + reg = <1>; + remote-endpoint = <&tvp5150_to_svideo_chroma>; + }; + }; +}; &i2c2 { - ... tvp5150@5c { compatible = "ti,tvp5150"; reg = <0x5c>; pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tvp5150_to_composite0: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite0_to_tvp5150>; + }; + + tvp5150_to_svideo_luma: endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_luma_to_tvp5150>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tvp5150_to_composite1: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite1_to_tvp5150>; + }; + + tvp5150_to_svideo_chroma: endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_chroma_to_tvp5150>; + }; + }; + + port@2 { + reg = <2>; - port { tvp5150_1: endpoint { remote-endpoint = <&ccdc_ep>; }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml new file mode 100644 index 000000000000..a2d1cd77c1e2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + Hantro G1/G2 video decode accelerators present on i.MX8MQ SoCs. + +properties: + compatible: + const: nxp,imx8mq-vpu + + reg: + maxItems: 3 + + reg-names: + items: + - const: g1 + - const: g2 + - const: ctrl + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: g1 + - const: g2 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: g1 + - const: g2 + - const: bus + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vpu: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu"; + reg = <0x38300000 0x10000>, + <0x38310000 0x10000>, + <0x38320000 0x10000>; + reg-names = "g1", "g2", "ctrl"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>, + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clock-names = "g1", "g2", "bus"; + power-domains = <&pgc_vpu>; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml new file mode 100644 index 000000000000..f9606df02d70 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8916-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: core + - const: iface + - const: bus + + iommus: + maxItems: 1 + + memory-region: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: "venus-decoder" + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: "venus-encoder" + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - iommus + - memory-region + - video-decoder + - video-encoder + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + + video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&gcc VENUS_GDSC>; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml new file mode 100644 index 000000000000..fa0dc6c47f1d --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8996-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: mbus + + iommus: + maxItems: 20 + + memory-region: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - iommus + - memory-region + - video-decoder + - video-encoder + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + power-domains = <&mmcc VENUS_GDSC>; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml new file mode 100644 index 000000000000..764affa4877e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sc7180-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 2 + + power-domain-names: + items: + - const: venus + - const: vcodec0 + + clocks: + maxItems: 5 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: vcodec0_core + - const: vcodec0_bus + + iommus: + maxItems: 1 + + memory-region: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + - clocks + - clock-names + - iommus + - memory-region + - video-decoder + - video-encoder + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sc7180.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>; + power-domain-names = "venus", "vcodec0"; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml new file mode 100644 index 000000000000..8552f4ab907e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-venus-v2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 3 + + power-domain-names: + items: + - const: venus + - const: vcodec0 + - const: vcodec1 + + clocks: + maxItems: 7 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: vcodec0_core + - const: vcodec0_bus + - const: vcodec1_core + - const: vcodec1_bus + + iommus: + maxItems: 2 + + memory-region: + maxItems: 1 + + video-core0: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-core1: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + - clocks + - clock-names + - iommus + - memory-region + - video-core0 + - video-core1 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>; + power-domain-names = "venus", "vcodec0", "vcodec1"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + }; + + video-core1 { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml new file mode 100644 index 000000000000..05cabe4e893a --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: core + - const: iface + - const: bus + + iommus: + maxItems: 2 + + memory-region: + maxItems: 1 + + video-core0: + type: object + + properties: + compatible: + const: venus-decoder + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: bus + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-core1: + type: object + + properties: + compatible: + const: venus-encoder + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: bus + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - iommus + - memory-region + - video-core0 + - video-core1 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&videocc VENUS_GDSC>; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt deleted file mode 100644 index b602c4c025e7..000000000000 --- a/Documentation/devicetree/bindings/media/qcom,venus.txt +++ /dev/null @@ -1,120 +0,0 @@ -* Qualcomm Venus video encoder/decoder accelerators - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain one of: - - "qcom,msm8916-venus" - - "qcom,msm8996-venus" - - "qcom,sdm845-venus" -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register base address and length of the register map. -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain interrupt line number. -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: A List of phandle and clock specifier pairs as listed - in clock-names property. -- clock-names: - Usage: required for msm8916 - Value type: <stringlist> - Definition: Should contain the following entries: - - "core" Core video accelerator clock - - "iface" Video accelerator AHB clock - - "bus" Video accelerator AXI clock -- clock-names: - Usage: required for msm8996 - Value type: <stringlist> - Definition: Should contain the following entries: - - "core" Core video accelerator clock - - "iface" Video accelerator AHB clock - - "bus" Video accelerator AXI clock - - "mbus" Video MAXI clock -- power-domains: - Usage: required - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pairs to the - power domain which is responsible for collapsing - and restoring power to the peripheral. -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. -- memory-region: - Usage: required - Value type: <phandle> - Definition: reference to the reserved-memory for the firmware - memory region. - -* Subnodes -The Venus video-codec node must contain two subnodes representing -video-decoder and video-encoder, and one optional firmware subnode. -Firmware subnode is needed when the platform does not have TrustZone. - -Every of video-encoder or video-decoder subnode should have: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain "venus-decoder" or "venus-encoder" -- clocks: - Usage: required for msm8996 - Value type: <prop-encoded-array> - Definition: A List of phandle and clock specifier pairs as listed - in clock-names property. -- clock-names: - Usage: required for msm8996 - Value type: <stringlist> - Definition: Should contain the following entries: - - "core" Subcore video accelerator clock - -- power-domains: - Usage: required for msm8996 - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pairs to the - power domain which is responsible for collapsing - and restoring power to the subcore. - -The firmware subnode must have: - -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - -* An Example - video-codec@1d00000 { - compatible = "qcom,msm8916-venus"; - reg = <0x01d00000 0xff000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, - <&gcc GCC_VENUS0_AHB_CLK>, - <&gcc GCC_VENUS0_AXI_CLK>; - clock-names = "core", "iface", "bus"; - power-domains = <&gcc VENUS_GDSC>; - iommus = <&apps_iommu 5>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; - - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE1_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE1_GDSC>; - }; - - video-firmware { - iommus = <&apps_iommu 0x10b2 0x0>; - }; - }; diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index a64ee038d235..b27c9385d490 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -143,6 +143,7 @@ properties: - rc-videomate-k100 - rc-videomate-s350 - rc-videomate-tv-pvr + - rc-videostrong-kii-pro - rc-wetek-hub - rc-wetek-play2 - rc-winfast diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt index fd5276abfad6..c53a8e5133f6 100644 --- a/Documentation/devicetree/bindings/media/rockchip-rga.txt +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -6,8 +6,9 @@ BitBLT, alpha blending and image blur/sharpness. Required properties: - compatible: value should be one of the following - "rockchip,rk3288-rga"; - "rockchip,rk3399-rga"; + "rockchip,rk3228-rga", "rockchip,rk3288-rga": for Rockchip RK3228 + "rockchip,rk3288-rga": for Rockchip RK3288 + "rockchip,rk3399-rga": for Rockchip RK3399 - interrupts: RGA interrupt specifier. diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index 1ea784179536..5e066629287d 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -177,7 +177,7 @@ examples: }; }; - i2c5: i2c@4807c000 { + i2c { clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index dd1843489ad1..3e0a8a92d652 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -347,6 +347,7 @@ examples: interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; external-memory-controller@7001b000 { @@ -363,20 +364,23 @@ examples: timing-0 { clock-frequency = <12750000>; - nvidia,emc-zcal-cnt-long = <0x00000042>; - nvidia,emc-auto-cal-interval = <0x001fffff>; - nvidia,emc-ctt-term-ctrl = <0x00000802>; - nvidia,emc-cfg = <0x73240000>; - nvidia,emc-cfg-2 = <0x000008c5>; - nvidia,emc-sel-dpd-ctrl = <0x00040128>; - nvidia,emc-bgbias-ctl0 = <0x00000008>; nvidia,emc-auto-cal-config = <0xa1430000>; nvidia,emc-auto-cal-config2 = <0x00000000>; nvidia,emc-auto-cal-config3 = <0x00000000>; - nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; nvidia,emc-mode-1 = <0x80100003>; nvidia,emc-mode-2 = <0x80200008>; nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < 0x00000000 /* EMC_RC */ diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 44d71469c914..63f674ffeb4f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372": - sram : Phandles for generic sram driver nodes, first should be type 'protect-exec' for the driver to use to copy and run PM functions, second should be regular pool to be used for - data region for code. See Documentation/devicetree/bindings/sram/sram.txt + data region for code. See Documentation/devicetree/bindings/sram/sram.yaml for more details. Optional properties: diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index 4a70f875a6eb..480385789394 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -97,14 +97,14 @@ examples: regulators { compatible = "maxim,max77650-regulator"; - max77650_ldo: regulator@0 { + max77650_ldo: regulator-ldo { regulator-compatible = "ldo"; regulator-name = "max77650-ldo"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <2937500>; }; - max77650_sbb0: regulator@1 { + max77650_sbb0: regulator-sbb0 { regulator-compatible = "sbb0"; regulator-name = "max77650-sbb0"; regulator-min-microvolt = <800000>; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 3c91ad430eea..b823b8625243 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8901-regulators" "qcom,rpm-pm8921-regulators" "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" - vdd_l0_l1_lvs-supply: - vdd_l2_l11_l12-supply: @@ -171,6 +172,9 @@ pm8018: s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l14, lvs1 +smb208: + s1a, s1b, s2a, s2b + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 4f62143afd24..a5ced46bbde9 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -26,8 +26,8 @@ Required properties: ldo6, ldo7, ldo8 - xxx-supply: Input voltage supply regulator. - These entries are require if regulators are enabled for a device. Missing of these - properties can cause the regulator registration fails. + These entries are required if regulators are enabled for a device. Missing these + properties can cause the regulator registration to fail. If some of input supply is powered through battery or always-on supply then also it is require to have these parameters with proper node handle of always on power supply. diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt index 56f244b5d8a4..56f244b5d8a4 100644 --- a/Documentation/devicetree/bindings/mfd/twl-familly.txt +++ b/Documentation/devicetree/bindings/mfd/twl-family.txt diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt index 088eff9ddb78..e0f901edc063 100644 --- a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices: Device Description ------ ----------- rave-sp-wdt : Watchdog -rave-sp-nvmem : Interface to onborad EEPROM +rave-sp-nvmem : Interface to onboard EEPROM rave-sp-backlight : Display backlight rave-sp-hwmon : Interface to onboard hardware sensors rave-sp-leds : Interface to onboard LEDs diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml new file mode 100644 index 000000000000..74ed4e397a78 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mips/loongson/devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson based Platforms Device Tree Bindings + +maintainers: + - Jiaxun Yang <jiaxun.yang@flygoat.com> +description: | + Devices with a Loongson CPU shall have the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: Generic Loongson3 Quad Core + RS780E + items: + - const: loongson,loongson3-4core-rs780e + + - description: Generic Loongson3 Octa Core + RS780E + items: + - const: loongson,loongson3-8core-rs780e +... diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index bb7e896cb644..9134e9bcca56 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -26,7 +26,7 @@ For generic IOMMU bindings, see Documentation/devicetree/bindings/iommu/iommu.txt. For arm-smmu binding, see: -Documentation/devicetree/bindings/iommu/arm,smmu.txt. +Documentation/devicetree/bindings/iommu/arm,smmu.yaml. Required properties: diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 0f97d711444e..de1b8bd550d3 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -43,6 +43,11 @@ Optional properties: This property allows user to change the tuning step to more than one delay cells which is useful for some special boards or cards when the default tuning step can't find the proper delay window within limited tuning retries. +- fsl,strobe-dll-delay-target: Specify the strobe dll control slave delay target. + This delay target programming host controller loopback read clock, and this + property allows user to change the delay target for the strobe input read clock. + If not use this property, driver default set the delay target to value 7. + Only eMMC HS400 mode need to take care of this property. Examples: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 3c0df4016a12..acc9f10871d4 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -351,7 +351,7 @@ dependencies: examples: - | - sdhci@ab000000 { + mmc@ab000000 { compatible = "sdhci"; reg = <0xab000000 0x200>; interrupts = <23>; @@ -370,6 +370,7 @@ examples: mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; + reg = <0x1c12000 0x200>; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vmmc3>; diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index 6d3c626e017d..4ec921e4bf34 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -28,6 +28,8 @@ specific for ux500 variant: - st,sig-pin-fbclk : feedback clock signal pin used. specific for sdmmc variant: +- reg : a second base register may be defined if a delay + block is present and used for tuning. - st,sig-dir : signal direction polarity used for cmd, dat0 dat123. - st,neg-edge : data & command phase relation, generated on sd clock falling edge. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt index 50e87df47971..c6ccecb9ae5a 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -18,7 +18,20 @@ Required Properties: - clocks: Handles to the clock inputs. - clock-names: Tuple including "clk_xin" and "clk_ahb" - interrupts: Interrupt specifiers - - ti,otap-del-sel: Output Tap Delay select + Output tap delay for each speed mode: + - ti,otap-del-sel-legacy + - ti,otap-del-sel-mmc-hs + - ti,otap-del-sel-sd-hs + - ti,otap-del-sel-sdr12 + - ti,otap-del-sel-sdr25 + - ti,otap-del-sel-sdr50 + - ti,otap-del-sel-sdr104 + - ti,otap-del-sel-ddr50 + - ti,otap-del-sel-ddr52 + - ti,otap-del-sel-hs200 + - ti,otap-del-sel-hs400 + These bindings must be provided otherwise the driver will disable the + corresponding speed mode (i.e. all nodes must provide at least -legacy) Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): - ti,trm-icp: DLL trim select @@ -38,6 +51,10 @@ Example: interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; sdhci-caps-mask = <0x80000007 0x0>; mmc-ddr-1_8v; - ti,otap-del-sel = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x5>; + ti,otap-del-sel-hs200 = <0x5>; + ti,otap-del-sel-hs400 = <0x0>; ti,trm-icp = <0x8>; }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 7ee639b1af03..5445931c5ab9 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -26,7 +26,13 @@ Required properties: - reg: Base address and length of the register in the following order: - Host controller register map (required) - - SD Core register map (required for msm-v4 and below) + - SD Core register map (required for controllers earlier than msm-v5) + - CQE register map (Optional, CQE support is present on SDHC instance meant + for eMMC and version v4.2 and above) +- reg-names: When CQE register map is supplied, below reg-names are required + - "hc" for Host controller register map + - "core" for SD core register map + - "cqhci" for CQE register map - interrupts: Should contain an interrupt-specifiers for the interrupts: - Host controller interrupt (required) - pinctrl-names: Should contain only one value - "default". diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml index 05f9f36dcb75..dd2c1b147142 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml @@ -62,7 +62,7 @@ examples: cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; - clock-freq-min-max = <400000 200000000>; + max-frequency = <200000000>; clock-frequency = <400000000>; data-addr = <0x200>; fifo-depth = <0x80>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 19f5508a7569..4a9145ef15d6 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -124,7 +124,7 @@ not every application needs SDIO irq, e.g. MMC cards. pinctrl-1 = <&mmc1_idle>; pinctrl-2 = <&mmc1_sleep>; ... - interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>; + interrupts-extended = <&intc 64 &gpio2 28 IRQ_TYPE_LEVEL_LOW>; }; mmc1_idle : pinmux_cirq_pin { diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt index f3893c4d3c6a..d2eada5044b2 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt @@ -27,7 +27,7 @@ Required properties of NAND chips: - reg: shall contain the native Chip Select ids from 0 to max supported by the cadence nand flash controller -See Documentation/devicetree/bindings/mtd/nand.txt for more details on +See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on generic bindings. Example: diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 48a7f916c5e4..88b57b0ca1f4 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -45,7 +45,7 @@ Optional properties: switch queue - resets: a single phandle and reset identifier pair. See - Documentation/devicetree/binding/reset/reset.txt for details. + Documentation/devicetree/bindings/reset/reset.txt for details. - reset-names: If the "reset" property is specified, this property should have the value "switch" to denote the switch reset line. diff --git a/Documentation/devicetree/bindings/net/dsa/ocelot.txt b/Documentation/devicetree/bindings/net/dsa/ocelot.txt new file mode 100644 index 000000000000..66a129fea705 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/ocelot.txt @@ -0,0 +1,116 @@ +Microchip Ocelot switch driver family +===================================== + +Felix +----- + +The VSC9959 core is currently the only switch supported by the driver, and is +found in the NXP LS1028A. It is a PCI device, part of the larger ENETC root +complex. As a result, the ethernet-switch node is a sub-node of the PCIe root +complex node and its "reg" property conforms to the parent node bindings: + +* reg: Specifies PCIe Device Number and Function Number of the endpoint device, + in this case for the Ethernet L2Switch it is PF5 (of device 0, bus 0). + +It does not require a "compatible" string. + +The interrupt line is used to signal availability of PTP TX timestamps and for +TSN frame preemption. + +For the external switch ports, depending on board configuration, "phy-mode" and +"phy-handle" are populated by board specific device tree instances. Ports 4 and +5 are fixed as internal ports in the NXP LS1028A instantiation. + +The CPU port property ("ethernet") configures the feature called "NPI port" in +the Ocelot hardware core. The CPU port in Ocelot is a set of queues, which are +connected, in the Node Processor Interface (NPI) mode, to an Ethernet port. +By default, in fsl-ls1028a.dtsi, the NPI port is assigned to the internal +2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific +use case. Moving the NPI port to an external switch port is hardware possible, +but there is no platform support for the Linux system on the LS1028A chip to +operate as an entire slave DSA chip. NPI functionality (and therefore DSA +tagging) is supported on a single port at a time. + +Any port can be disabled (and in fsl-ls1028a.dtsi, they are indeed all disabled +by default, and should be enabled on a per-board basis). But if any external +switch port is enabled at all, the ENETC PF2 (enetc_port2) should be enabled as +well, regardless of whether it is configured as the DSA master or not. This is +because the Felix PHYLINK implementation accesses the MAC PCS registers, which +in hardware truly belong to the ENETC port #2 and not to Felix. + +Supported PHY interface types (appropriate SerDes protocol setting changes are +needed in the RCW binary): + +* phy_mode = "internal": on ports 4 and 5 +* phy_mode = "sgmii": on ports 0, 1, 2, 3 +* phy_mode = "qsgmii": on ports 0, 1, 2, 3 +* phy_mode = "usxgmii": on ports 0, 1, 2, 3 +* phy_mode = "2500base-x": on ports 0, 1, 2, 3 + +For the rest of the device tree binding definitions, which are standard DSA and +PCI, refer to the following documents: + +Documentation/devicetree/bindings/net/dsa/dsa.txt +Documentation/devicetree/bindings/pci/pci.txt + +Example: + +&soc { + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ + ethernet-switch@0,5 { + reg = <0x000500 0 0 0 0>; + /* IEP INT_B */ + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* External ports */ + port@0 { + reg = <0>; + label = "swp0"; + }; + + port@1 { + reg = <1>; + label = "swp1"; + }; + + port@2 { + reg = <2>; + label = "swp2"; + }; + + port@3 { + reg = <3>; + label = "swp3"; + }; + + /* Tagging CPU port */ + port@4 { + reg = <4>; + ethernet = <&enetc_port2>; + phy-mode = "internal"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + /* Non-tagging CPU port */ + port@5 { + reg = <5>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 250f8d8cdce4..c00fb0d22c7b 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -110,6 +110,13 @@ PROPERTIES Usage: required Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt +- fsl,erratum-a050385 + Usage: optional + Value type: boolean + Definition: A boolean property. Indicates the presence of the + erratum A050385 which indicates that DMA transactions that are + split can result in a FMan lock. + ============================================================================= FMan MURAM Node diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml new file mode 100644 index 000000000000..9458f6659be1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,mvusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell USB to MDIO Controller + +maintainers: + - Tobias Waldekranz <tobias@waldekranz.com> + +description: |+ + This controller is mounted on development boards for Marvell's Link Street + family of Ethernet switches. It allows you to configure the switch's registers + using the standard MDIO interface. + + Since the device is connected over USB, there is no strict requirement of + having a device tree representation of the device. But in order to use it with + the mv88e6xxx driver, you need a device tree node in which to place the switch + definition. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + const: usb1286,1fa4 + reg: + maxItems: 1 + description: The USB port number on the host controller + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +examples: + - | + /* USB host controller */ + &usb1 { + mvusb: mdio@1 { + compatible = "usb1286,1fa4"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + /* MV88E6390X devboard */ + &mvusb { + switch@0 { + compatible = "marvell,mv88e6190"; + status = "ok"; + reg = <0x0>; + + ports { + /* Port definitions */ + }; + + mdio { + /* PHY definitions */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 5d08d2ffd4eb..50c3397a82bc 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -56,7 +56,6 @@ patternProperties: examples: - | davinci_mdio: mdio@5c030000 { - compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml new file mode 100644 index 000000000000..140f15245654 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IP Accelerator (IPA) + +maintainers: + - Alex Elder <elder@kernel.org> + +description: + This binding describes the Qualcomm IPA. The IPA is capable of offloading + certain network processing tasks (e.g. filtering, routing, and NAT) from + the main processor. + + The IPA sits between multiple independent "execution environments," + including the Application Processor (AP) and the modem. The IPA presents + a Generic Software Interface (GSI) to each execution environment. + The GSI is an integral part of the IPA, but it is logically isolated + and has a distinct interrupt and a separately-defined address space. + + See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt. + + - | + -------- --------- + | | | | + | AP +<---. .----+ Modem | + | +--. | | .->+ | + | | | | | | | | + -------- | | | | --------- + v | v | + --+-+---+-+-- + | GSI | + |-----------| + | | + | IPA | + | | + ------------- + +properties: + compatible: + const: "qcom,sdm845-ipa" + + reg: + items: + - description: IPA registers + - description: IPA shared memory + - description: GSI registers + + reg-names: + items: + - const: ipa-reg + - const: ipa-shared + - const: gsi + + clocks: + maxItems: 1 + + clock-names: + const: core + + interrupts: + items: + - description: IPA interrupt (hardware IRQ) + - description: GSI interrupt (hardware IRQ) + - description: Modem clock query interrupt (smp2p interrupt) + - description: Modem setup ready interrupt (smp2p interrupt) + + interrupt-names: + items: + - const: ipa + - const: gsi + - const: ipa-clock-query + - const: ipa-setup-ready + + interconnects: + items: + - description: Interconnect path between IPA and main memory + - description: Interconnect path between IPA and internal memory + - description: Interconnect path between IPA and the AP subsystem + + interconnect-names: + items: + - const: memory + - const: imem + - const: config + + qcom,smem-states: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used in by the AP to signal the modem. + items: + - description: Whether the "ipa-clock-enabled" state bit is valid + - description: Whether the IPA clock is enabled (if valid) + + qcom,smem-state-names: + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + description: The names of the state bits used for SMP2P output + items: + - const: ipa-clock-enabled-valid + - const: ipa-clock-enabled + + modem-init: + type: boolean + description: + If present, it indicates that the modem is responsible for + performing early IPA initialization, including loading and + validating firwmare used by the GSI. + + modem-remoteproc: + $ref: /schemas/types.yaml#definitions/phandle + description: + This defines the phandle to the remoteproc node representing + the modem subsystem. This is requied so the IPA driver can + receive and act on notifications of modem up/down events. + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + If present, a phandle for a reserved memory area that holds + the firmware passed to Trust Zone for authentication. Required + when Trust Zone (not the modem) performs early initialization. + +required: + - compatible + - reg + - clocks + - interrupts + - interconnects + - qcom,smem-states + - modem-remoteproc + +oneOf: + - required: + - modem-init + - required: + - memory-region + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + smp2p-mpss { + compatible = "qcom,smp2p"; + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + ipa@1e40000 { + compatible = "qcom,sdm845-ipa"; + + modem-init; + modem-remoteproc = <&mss_pil>; + + reg = <0 0x1e40000 0 0x7000>, + <0 0x1e47000 0 0x2000>, + <0 0x1e04000 0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, + <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = + <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>, + <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml new file mode 100644 index 000000000000..b9f90081046f --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x MDIO bus controller + +maintainers: + - Ansuel Smith <ansuelsmth@gmail.com> + +description: + The ipq806x soc have a MDIO dedicated controller that is + used to communicate with the gmac phy connected. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + const: qcom,ipq8064-mdio + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + + mdio0: mdio@37000000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qcom,ipq8064-mdio"; + reg = <0x37000000 0x200000>; + + clocks = <&gcc GMAC_CORE1_CLK>; + + switch@10 { + compatible = "qca,qca8337"; + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt index 999aceadb985..beca6466d59a 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -31,6 +31,7 @@ Optional properties for compatible string qcom,wcn399x-bt: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt - firmware-name: specify the name of nvm firmware to load + - clocks: clock provided to the controller Examples: @@ -57,5 +58,6 @@ serial@898000 { vddch0-supply = <&vreg_l25a_3p3>; max-speed = <3200000>; firmware-name = "crnv21.bin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; }; }; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml new file mode 100644 index 000000000000..78bf511e2892 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings + +maintainers: + - Grygorii Strashko <grygorii.strashko@ti.com> + - Sekhar Nori <nsekhar@ti.com> + +description: + The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports + (one external) and provides Ethernet packet communication for the device. + CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII), + Reduced Media Independent Interface (RMII), the Management Data + Input/Output (MDIO) interface for physical layer device (PHY) management, + new version of Common Platform Time Sync (CPTS), updated Address Lookup + Engine (ALE). + One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and + an internal Communications Port Programming Interface (CPPI5) (Host port 0). + Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels + and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA + Peripheral Root Complex (UDMA-P) controller. + The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0. + + Additional features + priority level Quality Of Service (QOS) support (802.1p) + Support for Audio/Video Bridging (P802.1Qav/D6.0) + Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F) + Flow Control (802.3x) Support + Time Sensitive Network Support + IEEE P902.3br/D2.0 Interspersing Express Traffic + IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic + Configurable number of addresses plus VLANs + Configurable number of classifier/policers + VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on + ingress, Auto VLAN removal on egress and auto pad to minimum frame size. + RX/TX csum offload + + Specifications can be found at + http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf + http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + oneOf: + - const: ti,am654-cpsw-nuss + - const: ti,j721e-cpsw-nuss + + reg: + maxItems: 1 + description: + The physical base address and size of full the CPSW2G NUSS IO range + + reg-names: + items: + - const: cpsw_nuss + + ranges: true + + dma-coherent: true + + clocks: + description: CPSW2G NUSS functional clock + + clock-names: + items: + - const: fck + + power-domains: + maxItems: 1 + + dmas: + maxItems: 9 + + dma-names: + items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: tx4 + - const: tx5 + - const: tx6 + - const: tx7 + - const: rx + + ethernet-ports: + type: object + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + port@1: + type: object + description: CPSW2G NUSS external ports + + allOf: + - $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - const: 1 + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,mac-only: + $ref: /schemas/types.yaml#definitions/flag + description: + Specifies the port works in mac-only mode. + + ti,syscon-efuse: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + Phandle to the system control device node which provides access + to efuse IO range with MAC addresses + + required: + - reg + - phys + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + allOf: + - $ref: "ti,davinci-mdio.yaml#" + description: + CPSW MDIO bus. + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - power-domains + - dmas + - dma-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/k3.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/net/ti-dp83867.h> + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,am654-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + bus_freq = <1000000>; + + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt index 7e675dafc256..3a76d8faaaed 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt @@ -4,17 +4,27 @@ This node provides properties for configuring the MediaTek mt76xx wireless device. The node is expected to be specified as a child node of the PCI controller to which the wireless chip is connected. -Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. -For SoC, use the compatible string "mediatek,mt7628-wmac" and the following -properties: +Alternatively, it can specify the wireless part of the MT7628/MT7688 or +MT7622 SoC. For SoC, use the following compatible strings: + +compatible: +- "mediatek,mt7628-wmac" for MT7628/MT7688 +- "mediatek,mt7622-wmac" for MT7622 +properties: - reg: Address and length of the register set for the device. - interrupts: Main device interrupt +MT7622 specific properties: +- power-domains: phandle to the power domain that the WMAC is part of +- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node + Optional properties: - ieee80211-freq-limit: See ieee80211.txt - mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data +- big-endian: if the radio eeprom partition is written in big-endian, specify + this property The MAC address can as well be set with corresponding optional properties defined in net/ethernet.txt. @@ -31,6 +41,7 @@ Optional nodes: reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <5000000 6000000>; mediatek,mtd-eeprom = <&factory 0x8000>; + big-endian; led { led-sources = <2>; @@ -50,3 +61,15 @@ wmac: wmac@10300000 { mediatek,mtd-eeprom = <&factory 0x0000>; }; + +MT7622 example: + +wmac: wmac@18000000 { + compatible = "mediatek,mt7622-wmac"; + reg = <0 0x18000000 0 0x100000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; + + mediatek,infracfg = <&infracfg>; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; +}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 616c87746d6f..71bf91f97386 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -91,6 +91,11 @@ Optional properties: - qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically mapped msa region. +- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex + support by the hardware. +- qcom,coexist-gpio-pin : gpio pin number information to support coex + which will be used by wifi firmware. + Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -159,6 +164,8 @@ wifi0: wifi@a000000 { qcom,msi_addr = <0x0b006040>; qcom,msi_base = <0x40>; qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; + qcom,coexist-support = <1>; + qcom,coexist-gpio-pin = <0x33>; }; Example (to supply wcn3990 SoC wifi block details): diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index f38950560982..88fd28d15eac 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -9,11 +9,12 @@ Required properties: - spi-max-frequency : Maximum SPI clocking speed of device in Hz - interrupts : Should contain interrupt line - vio-supply : phandle to regulator providing VIO -- ti,power-gpio : GPIO connected to chip's PMEN pin Optional properties: - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which provides configuration data (calibration, MAC, ...) +- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in + SPI mode - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional SPI connection related properties, diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index b43c6c65294e..65980224d550 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -76,6 +76,8 @@ examples: qfprom: eeprom@700000 { #address-cells = <1>; #size-cells = <1>; + reg = <0x00700000 0x100000>; + wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* ... */ diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt index 4751029b9b74..64f07417ecfb 100644 --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt @@ -19,7 +19,8 @@ In 'cpu' nodes: In 'operating-points-v2' table: - compatible: Should be - - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. + - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974, + apq8064, ipq8064, msm8960 and ipq8074. Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml index 020ef9e4c411..94ac23687b7e 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml @@ -86,7 +86,7 @@ examples: #include <dt-bindings/clock/sun4i-a10-ccu.h> #include <dt-bindings/reset/sun4i-a10-ccu.h> - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 57d8603076bd..9e32cb43fb21 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -14,6 +14,7 @@ properties: compatible: enum: - amlogic,meson-g12a-usb2-phy + - amlogic,meson-a1-usb2-phy reg: maxItems: 1 @@ -49,6 +50,19 @@ required: - reset-names - "#phy-cells" +if: + properties: + compatible: + enum: + - amlogic,meson-a1-usb-ctrl + +then: + properties: + power-domains: + maxItems: 1 + required: + - power-domains + examples: - | phy@36000 { diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt deleted file mode 100644 index 7f49fd54ebc1..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence MHDP DisplayPort SD0801 PHY binding -=========================================== - -This binding describes the Cadence SD0801 PHY hardware included with -the Cadence MHDP DisplayPort controller. - -------------------------------------------------------------------------------- -Required properties (controller (parent) node): -- compatible : Should be "cdns,dp-phy" -- reg : Defines the following sets of registers in the parent - mhdp device: - - Offset of the DPTX PHY configuration registers - - Offset of the SD0801 PHY configuration registers -- #phy-cells : from the generic PHY bindings, must be 0. - -Optional properties: -- num_lanes : Number of DisplayPort lanes to use (1, 2 or 4) -- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160, - 2430, 2700, 3240, 4320, 5400 or 8100) -------------------------------------------------------------------------------- - -Example: - dp_phy: phy@f0fb030a00 { - compatible = "cdns,dp-phy"; - reg = <0xf0 0xfb030a00 0x0 0x00000040>, - <0xf0 0xfb500000 0x0 0x00100000>; - num_lanes = <4>; - max_bit_rate = <8100>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml new file mode 100644 index 000000000000..c779a3c7d87a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence Torrent SD0801 PHY binding for DisplayPort + +description: + This binding describes the Cadence SD0801 PHY (also known as Torrent PHY) + hardware included with the Cadence MHDP DisplayPort controller. + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,torrent-phy + - ti,j721e-serdes-10g + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + maxItems: 1 + description: + PHY reference clock. Must contain an entry in clock-names. + + clock-names: + const: refclk + + reg: + minItems: 1 + maxItems: 2 + items: + - description: Offset of the Torrent PHY configuration registers. + - description: Offset of the DPTX PHY configuration registers. + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: torrent_phy + - const: dptx_phy + + resets: + maxItems: 1 + description: + Torrent PHY reset. + See Documentation/devicetree/bindings/reset/reset.txt + +patternProperties: + '^phy@[0-7]+$': + type: object + description: + Each group of PHY lanes with a single master lane should be represented as a sub-node. + properties: + reg: + description: + The master lane number. This is the lowest numbered lane in the lane group. + + resets: + minItems: 1 + maxItems: 4 + description: + Contains list of resets, one per lane, to get all the link lanes out of reset. + + "#phy-cells": + const: 0 + + cdns,phy-type: + description: + Specifies the type of PHY for which the group of PHY lanes is used. + Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 3, 4, 5, 6] + + cdns,num-lanes: + description: + Number of DisplayPort lanes. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 4] + default: 4 + + cdns,max-bit-rate: + description: + Maximum DisplayPort link bit rate to use, in Mbps + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] + default: 8100 + + required: + - reg + - resets + - "#phy-cells" + - cdns,phy-type + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - reg + - reg-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + torrent_phy: torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>, + <0xf0 0xfb030a00 0x0 0x00000040>; + reg-names = "torrent_phy", "dptx_phy"; + resets = <&phyrst 0>; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index a5f7a4f0dbc1..dd75b676b71d 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -13,10 +13,16 @@ Required properties (controller (parent) node): "mediatek,mt8173-u3phy"; make use of "mediatek,generic-tphy-v1" on mt2701 instead and "mediatek,generic-tphy-v2" on mt2712 instead. - - clocks : (deprecated, use port's clocks instead) a list of phandle + - clock-specifier pairs, one for each entry in clock-names - - clock-names : (deprecated, use port's one instead) must contain - "u3phya_ref": for reference clock of usb3.0 analog phy. + +- #address-cells: the number of cells used to represent physical + base addresses. +- #size-cells: the number of cells used to represent the size of an address. +- ranges: the address mapping relationship to the parent, defined with + - empty value: if optional 'reg' is used. + - non-empty value: if optional 'reg' is not used. should set + the child's base address to 0, the physical address + within parent's address space, and the length of + the address map. Required nodes : a sub-node is required for each port the controller provides. Address range information including the usual @@ -34,12 +40,6 @@ Optional properties (controller (parent) node): Required properties (port (child) node): - reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeed analog phy, sometimes is - 24M, 25M or 27M, depended on platform. - #phy-cells : should be 1 (See second example) cell after port phandle is phy type from: - PHY_TYPE_USB2 @@ -48,10 +48,22 @@ Required properties (port (child) node): - PHY_TYPE_SATA Optional properties (PHY_TYPE_USB2 port (child) node): +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : may contain + "ref": 48M reference clock for HighSpeed (digital) phy; and 26M + reference clock for SuperSpeed (digital) phy, sometimes is + 24M, 25M or 27M, depended on platform. + "da_ref": the reference clock of analog phy, used if the clocks + of analog and digital phys are separated, otherwise uses + "ref" clock only if needed. + - mediatek,eye-src : u32, the value of slew rate calibrate - mediatek,eye-vrt : u32, the selection of VRT reference voltage - mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage - mediatek,bc12 : bool, enable BC12 of u2phy if support it +- mediatek,discth : u32, the selection of disconnect threshold +- mediatek,intr : u32, the selection of internal R (resistance) Example: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml new file mode 100644 index 000000000000..144ae29e7141 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QUSB2 phy controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +description: + QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,msm8996-qusb2-phy + - qcom,msm8998-qusb2-phy + - items: + - enum: + - qcom,sc7180-qusb2-phy + - qcom,sdm845-qusb2-phy + - const: qcom,qusb2-v2-phy + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + items: + - description: phy config clock + - description: 19.2 MHz ref clk + - description: phy interface clock (Optional) + + clock-names: + minItems: 2 + maxItems: 3 + items: + - const: cfg_ahb + - const: ref + - const: iface + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vdda-phy-dpdm-supply: + description: + Phandle to 3.1V regulator supply to Dp/Dm port signals. + + resets: + maxItems: 1 + description: + Phandle to reset to phy block. + + nvmem-cells: + maxItems: 1 + description: + Phandle to nvmem cell that contains 'HS Tx trim' + tuning parameter value for qusb2 phy. + + qcom,tcsr-syscon: + description: + Phandle to TCSR syscon register region. + $ref: /schemas/types.yaml#/definitions/phandle + +if: + properties: + compatible: + contains: + const: qcom,qusb2-v2-phy +then: + properties: + qcom,imp-res-offset-value: + description: + It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 63 + default: 0 + + qcom,bias-ctrl-value: + description: + It is a 6 bit value that specifies bias-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 63 + default: 0 + + qcom,charge-ctrl-value: + description: + It is a 2 bit value that specifies charge-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 0 + + qcom,hstx-trim-value: + description: + It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 15 + default: 3 + + qcom,preemphasis-level: + description: + It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 2 + + qcom,preemphasis-width: + description: + It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 1 + default: 0 + + qcom,hsdisc-trim-value: + description: + It is a 2 bit value tuning parameter that control disconnect + threshold and may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdda-pll-supply + - vdda-phy-dpdm-supply + - resets + + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + hsusb_phy: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml new file mode 100644 index 000000000000..ca6a0836b53c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY + +properties: + compatible: + enum: + - qcom,usb-hs-28nm-femtophy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmcc ref clock + - description: PHY AHB clock + - description: Rentention clock + + clock-names: + items: + - const: ref + - const: ahb + - const: sleep + + resets: + items: + - description: PHY core reset + - description: POR reset + + reset-names: + items: + - const: phy + - const: por + + vdd-supply: + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + description: phandle to the regulator 1.8V supply node. + + vdda3p3-supply: + description: phandle to the regulator 3.3V supply node. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vdd-supply + - vdda1p8-supply + - vdda3p3-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + usb2_phy_prim: phy@7a000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0007a000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy", "por"; + vdd-supply = <&vreg_l4_1p2>; + vdda1p8-supply = <&vreg_l5_1p8>; + vdda3p3-supply = <&vreg_l12_3p3>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml new file mode 100644 index 000000000000..bd1388d62ce0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY + +properties: + compatible: + enum: + - qcom,usb-ss-28nm-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmcc clock + - description: PHY AHB clock + - description: SuperSpeed pipe clock + + clock-names: + items: + - const: ref + - const: ahb + - const: pipe + + vdd-supply: + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + description: phandle to the regulator 1.8V supply node. + + resets: + items: + - description: COM reset + - description: PHY reset line + + reset-names: + items: + - const: com + - const: phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdd-supply + - vdda1p8-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + usb3_phy: usb3-phy@78000 { + compatible = "qcom,usb-ss-28nm-phy"; + reg = <0x78000 0x400>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "ref", "ahb", "pipe"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "com", "phy"; + vdd-supply = <&vreg_l3_1p05>; + vdda1p8-supply = <&vreg_l5_1p8>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt deleted file mode 100644 index a1697c27aecd..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +++ /dev/null @@ -1,37 +0,0 @@ -Qualcomm DWC3 HS AND SS PHY CONTROLLER --------------------------------------- - -DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer -controllers. Each DWC3 PHY controller should have its own node. - -Required properties: -- compatible: should contain one of the following: - - "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller - - "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller -- reg: offset and length of the DWC3 PHY controller register set -- #phy-cells: must be zero -- clocks: a list of phandles and clock-specifier pairs, one for each entry in - clock-names. -- clock-names: Should contain "ref" for the PHY reference clock - -Optional clocks: - "xo" External reference clock - -Example: - phy@100f8800 { - compatible = "qcom,dwc3-hs-usb-phy"; - reg = <0x100f8800 0x30>; - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - }; - - phy@100f8830 { - compatible = "qcom,dwc3-ss-usb-phy"; - reg = <0x100f8830 0x30>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index eac9ad3cbbc8..54d6f8d43508 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -8,10 +8,13 @@ Required properties: - compatible: compatible list, contains: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, + "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996, "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998, + "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845, + "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845, "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845, @@ -44,6 +47,8 @@ Required properties: For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,msm8996-qmp-ufs-phy" must contain: + "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8998-qmp-usb3-phy" must contain: @@ -52,6 +57,10 @@ Required properties: "ref", "ref_aux". For "qcom,msm8998-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,sdm845-qhp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref", "refgen". + For "qcom,sdm845-qmp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref", "refgen". For "qcom,sdm845-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: @@ -72,6 +81,8 @@ Required properties: "phy", "common". For "qcom,msm8996-qmp-pcie-phy" must contain: "phy", "common", "cfg". + For "qcom,msm8996-qmp-ufs-phy": must contain: + "ufsphy". For "qcom,msm8996-qmp-usb3-phy" must contain "phy", "common". For "qcom,msm8998-qmp-usb3-phy" must contain @@ -80,6 +91,10 @@ Required properties: "ufsphy". For "qcom,msm8998-qmp-pcie-phy" must contain: "phy", "common". + For "qcom,sdm845-qhp-pcie-phy" must contain: + "phy". + For "qcom,sdm845-qmp-pcie-phy" must contain: + "phy". For "qcom,sdm845-qmp-usb3-phy" must contain: "phy", "common". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt deleted file mode 100644 index fe29f9e0af6d..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt +++ /dev/null @@ -1,68 +0,0 @@ -Qualcomm QUSB2 phy controller -============================= - -QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. - -Required properties: - - compatible: compatible list, contains - "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, - "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998, - "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. - - - reg: offset and length of the PHY register set. - - #phy-cells: must be 0. - - - clocks: a list of phandles and clock-specifier pairs, - one for each entry in clock-names. - - clock-names: must be "cfg_ahb" for phy config clock, - "ref" for 19.2 MHz ref clk, - "iface" for phy interface clock (Optional). - - - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. - - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals. - - - resets: Phandle to reset to phy block. - -Optional properties: - - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim' - tuning parameter value for qusb2 phy. - - - qcom,tcsr-syscon: Phandle to TCSR syscon register region. - - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be - added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY - tuning parameter that may vary for different boards of same SOC. - This property is applicable to only QUSB2 v2 PHY (sdm845). - - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX - output current. - Possible range is - 15mA to 24mA (stepsize of 600 uA). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - This property is applicable to only QUSB2 v2 PHY (sdm845). - Default value is 22.2mA for sdm845. - - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. - Possible range is 0 to 15% (stepsize of 5%). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - This property is applicable to only QUSB2 v2 PHY (sdm845). - Default value is 10% for sdm845. -- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX - pre-emphasis (specified using qcom,preemphasis-level) must be in - effect. Duration could be half-bit of full-bit. - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - This property is applicable to only QUSB2 v2 PHY (sdm845). - Default value is full-bit width for sdm845. - -Example: - hsusb_phy: phy@7411000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7411000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>, - clock-names = "cfg_ahb", "ref"; - - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2p_hstx_trim>; - }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt index 50ce9ae0f7a5..83b78c1c0644 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt @@ -40,6 +40,7 @@ Required properties: "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform "ti,am43xx-phy-gmii-sel" for am43xx platform "ti,dm814-phy-gmii-sel" for dm814x platform + "ti,am654-phy-gmii-sel" for AM654x/J721E platform - reg : Address and length of the register set for the device - #phy-cells : must be 2. cell 1 - CPSW port number (starting from 1) diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt index 1889d3b89d68..3cee372c5742 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt @@ -5,14 +5,19 @@ PCIe controller implemented on Socionext UniPhier SoCs. Required properties: - compatible: Should contain one of the following: + "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY - reg: Specifies offset and length of the register set for the device. - #phy-cells: Must be zero. -- clocks: A phandle to the clock gate for PCIe glue layer including - this phy. -- resets: A phandle to the reset line for PCIe glue layer including - this phy. +- clocks: A list of phandles to the clock gate for PCIe glue layer + including this phy. +- clock-names: For Pro5 only, should contain the following: + "gio", "link" - for Pro5 SoC +- resets: A list of phandles to the reset line for PCIe glue layer + including this phy. +- reset-names: For Pro5 only, should contain the following: + "gio", "link" - for Pro5 SoC Optional properties: - socionext,syscon: A phandle to system control to set configurations diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt index e8d8086a7ae9..093d4f08705f 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt @@ -7,7 +7,7 @@ this describes about High-Speed PHY. Required properties: - compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC @@ -16,13 +16,13 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain the following: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro5 SoC "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. "phy", "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain the following: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro5 SoC "phy", "link" - for others Optional properties: diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt index 490b815445e8..9df2bc2f5999 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt @@ -8,6 +8,7 @@ this describes about Super-Speed PHY. Required properties: - compatible: Should contain one of the following: "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC @@ -16,13 +17,13 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoC "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. "phy", "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoC "phy", "link" - for others Optional properties: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index bb690e20c368..135c7dfbc180 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -17,7 +17,7 @@ description: |+ "aspeed,ast2400-scu", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index f7f5d57f2c9a..824f7fd1d51b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -18,7 +18,7 @@ description: |+ "aspeed,g5-scu", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 3749fa233e87..ac8d1c30a8ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -17,7 +17,7 @@ description: |+ "aspeed,ast2600-scu", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 754ea7ab040a..ef4de32cb17c 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -248,7 +248,7 @@ examples: }; //Example 3 pin groups - pinctrl@60020000 { + pinctrl { usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index aab70e8b681e..d3098c924b25 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -18,7 +18,7 @@ description: |+ "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt deleted file mode 100644 index eefc7ed22ca2..000000000000 --- a/Documentation/devicetree/bindings/power/domain-idle-state.txt +++ /dev/null @@ -1,33 +0,0 @@ -PM Domain Idle State Node: - -A domain idle state node represents the state parameters that will be used to -select the state when there are no active components in the domain. - -The state node has the following parameters - - -- compatible: - Usage: Required - Value type: <string> - Definition: Must be "domain-idle-state". - -- entry-latency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing worst case latency in - microseconds required to enter the idle state. - The exit-latency-us duration may be guaranteed - only after entry-latency-us has passed. - -- exit-latency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing worst case latency - in microseconds required to exit the idle state. - -- min-residency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing minimum residency duration - in microseconds after which the idle state will yield - power benefits after overcoming the overhead in entering -i the idle state. diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml new file mode 100644 index 000000000000..dfba1af9abe5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/domain-idle-state.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PM Domain Idle States binding description + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + A domain idle state node represents the state parameters that will be used to + select the state when there are no active components in the PM domain. + +properties: + $nodename: + const: domain-idle-states + +patternProperties: + "^(cpu|cluster|domain)-": + type: object + description: + Each state node represents a domain idle state description. + + properties: + compatible: + const: domain-idle-state + + entry-latency-us: + description: + The worst case latency in microseconds required to enter the idle + state. Note that, the exit-latency-us duration may be guaranteed only + after the entry-latency-us has passed. + + exit-latency-us: + description: + The worst case latency in microseconds required to exit the idle + state. + + min-residency-us: + description: + The minimum residency duration in microseconds after which the idle + state will yield power benefits, after overcoming the overhead while + entering the idle state. + + required: + - compatible + - entry-latency-us + - exit-latency-us + - min-residency-us + +examples: + - | + + domain-idle-states { + domain_retention: domain-retention { + compatible = "domain-idle-state"; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 455b573293ae..6047aacd7766 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -25,22 +25,20 @@ description: |+ properties: $nodename: - pattern: "^(power-controller|power-domain)(@.*)?$" + pattern: "^(power-controller|power-domain)([@-].*)?$" domain-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array - description: - A phandle of an idle-state that shall be soaked into a generic domain - power state. The idle state definitions are compatible with - domain-idle-state specified in - Documentation/devicetree/bindings/power/domain-idle-state.txt - phandles that are not compatible with domain-idle-state will be ignored. - The domain-idle-state property reflects the idle state of this PM domain - and not the idle states of the devices or sub-domains in the PM domain. - Devices and sub-domains have their own idle-states independent - of the parent domain's idle states. In the absence of this property, - the domain would be considered as capable of being powered-on - or powered-off. + description: | + Phandles of idle states that defines the available states for the + power-domain provider. The idle state definitions are compatible with the + domain-idle-state bindings, specified in ./domain-idle-state.yaml. + + Note that, the domain-idle-state property reflects the idle states of this + PM domain and not the idle states of the devices or sub-domains in the PM + domain. Devices and sub-domains have their own idle states independent of + the parent domain's idle states. In the absence of this property, the + domain would be considered as capable of being powered-on or powered-off. operating-points-v2: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 5b09b2deb483..08497ef26c7a 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -109,4 +109,4 @@ Example: required-opps = <&domain1_opp_1>; }; -[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt +[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml diff --git a/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml new file mode 100644 index 000000000000..9bc664f414a1 --- /dev/null +++ b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ptp/ptp-idt82p33.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IDT 82P33 PTP Clock Device Tree Bindings + +description: | + IDT 82P33XXX Synchronization Management Unit (SMU) based PTP clock + +maintainers: + - Min Li <min.li.xe@renesas.com> + +properties: + compatible: + enum: + - idt,82p33810 + - idt,82p33813 + - idt,82p33814 + - idt,82p33831 + - idt,82p33910 + - idt,82p33913 + - idt,82p33914 + - idt,82p33931 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + phc@51 { + compatible = "idt,82p33810"; + reg = <0x51>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt new file mode 100644 index 000000000000..551867829459 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mp886x.txt @@ -0,0 +1,27 @@ +Monolithic Power Systems MP8867/MP8869 voltage regulator + +Required properties: +- compatible: Must be one of the following. + "mps,mp8867" + "mps,mp8869" +- reg: I2C slave address. +- enable-gpios: enable gpios. +- mps,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + +Any property defined as part of the core regulator binding, defined in +./regulator.txt, can also be used. + +Example: + + vcpu: regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <850000>; + regulator-always-on; + regulator-boot-on; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml new file mode 100644 index 000000000000..f0acce2029fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MP5416 PMIC + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +properties: + $nodename: + pattern: "^pmic@[0-9a-f]{1,2}$" + compatible: + enum: + - mps,mp5416 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4] and LDO[1-4] + + patternProperties: + "^buck[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + "^ldo[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3975000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index d126df043403..dea4384f4c03 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8994-regulators" "qcom,rpm-pm8998-regulators" "qcom,rpm-pma8084-regulators" + "qcom,rpm-pmi8994-regulators" "qcom,rpm-pmi8998-regulators" "qcom,rpm-pms405-regulators" @@ -146,6 +147,15 @@ Regulator nodes are identified by their compatible: - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: +- vdd_bst_byp-supply: + Usage: optional (pmi8994 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: - vdd_s4-supply: - vdd_s5-supply: - vdd_s6-supply: @@ -259,6 +269,9 @@ pma8084: l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 +pmi8994: + s1, s2, s3, boost-bypass + pmi8998: bob diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index f5cdac8b2847..8b005192f6e8 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -161,7 +161,7 @@ The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the PMICs below. -pm8005: +pm8004: s2, s5 pm8005: diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 92ff2e8ad572..91a39a33000b 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -191,7 +191,7 @@ patternProperties: examples: - | - xyzreg: regulator@0 { + xyzreg: regulator { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <2500000>; regulator-always-on; diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml new file mode 100644 index 000000000000..d1a79d2ffa1e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ4019 VQMMC SD LDO regulator + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller, + in order to support both 1.8 and 3V I/O voltage levels an LDO + controller is also embedded. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: qcom,vqmmc-ipq4019-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; +... diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 246dea8a2ec9..8ac437282659 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -23,7 +23,11 @@ properties: description: Global reset register offset and bit offset. allOf: - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 2 + items: + - description: Register offset + - description: Register bit offset + minimum: 0 + maximum: 31 "#reset-cells": minimum: 2 diff --git a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt index b4edaf7c7ff3..2880d5dda95e 100644 --- a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt +++ b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt @@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller The RCC IP is both a reset and a clock controller. -Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt +Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 35957cbf1571..c8d677f9491f 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -8,6 +8,10 @@ Required properties: Optional properties: - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- fsl,inverted-tx , fsl,inverted-rx : Indicate that the hardware attached + to the peripheral inverts the signal transmitted or received, + respectively, and that the peripheral should invert its output/input + using the INVT/INVR registers. - rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt. Note that for RS485 you must enable either the "uart-has-rtscts" or the "rts-gpios" diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index c904e2e68332..e7448b92dd9d 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -6,6 +6,8 @@ Required properties: on Vybrid vf610 SoC with 8-bit register organization - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated on LS1021A SoC with 32-bit big-endian register organization + - "fsl,ls1028a-lpuart" for lpuart compatible with the one integrated + on LS1028A SoC with 32-bit little-endian register organization - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated on i.MX7ULP SoC with 32-bit little-endian register organization - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated @@ -15,10 +17,10 @@ Required properties: - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names -- clock-names : For vf610/ls1021a/imx7ulp, "ipg" clock is for uart bus/baud - clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used to access - lpuart controller registers, it also requires "baud" clock for module to - receive/transmit data. +- clock-names : For vf610/ls1021a/ls1028a/imx7ulp, "ipg" clock is for uart + bus/baud clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used + to access lpuart controller registers, it also requires "baud" clock for + module to receive/transmit data. Optional properties: - dmas: A list of two dma specifiers, one for each entry in dma-names. diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index 944743dd9212..c42b91e525fa 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -36,7 +36,7 @@ SAI subnodes required properties: - clock-names: Must contain "sai_ck". Must also contain "MCLK", if SAI shares a master clock, with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt + - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - dma-names: identifier string for each DMA request line "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt index 33826f2459fa..ca9101777c44 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt @@ -10,7 +10,7 @@ Required properties: - clock-names: must contain "kclk" - interrupts: cpu DAI interrupt line - dmas: DMA specifiers for audio data DMA and iec control flow DMA - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt + See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" Optional properties: diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 49b617c98ae7..9147df29022a 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -22,6 +22,7 @@ properties: enum: - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs + - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs interrupts: maxItems: 1 @@ -40,6 +41,27 @@ properties: items: - const: core +if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + +then: + properties: + clocks: + contains: + items: + - description: controller register bus clock + - description: baud rate generator and delay control clock + + clock-names: + minItems: 2 + items: + - const: core + - const: pclk + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 2d3264140cc5..33bc58f4cf4b 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -10,7 +10,10 @@ Required properties: - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M + - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ + - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM + - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN + - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - clocks : Clock specifiers for both ipg and per clocks. diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml new file mode 100644 index 000000000000..2aa766759d59 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller + +maintainers: + - Chuanhong Guo <gch981213@gmail.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: qca,ar934x-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/ath79-clk.h> + spi: spi@1f000000 { + compatible = "qca,ar934x-spi"; + reg = <0x1f000000 0x1c>; + clocks = <&pll ATH79_CLK_AHB>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 1e0ca6ccf64b..d8e5509a7081 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -52,6 +52,12 @@ properties: description: The SPI controller acts as a slave, instead of a master. +oneOf: + - required: + - "#address-cells" + - required: + - spi-slave + patternProperties: "^slave$": type: object @@ -114,7 +120,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MISO. + Bus width to the SPI bus used for read transfers. spi-rx-delay-us: description: @@ -126,7 +132,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MOSI. + Bus width to the SPI bus used for write transfers. spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 162e024b95a0..30a79da9c039 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,12 +1,17 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", - "fsl,ls2085a-dspi" - or - "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi" +- compatible : must be one of: + "fsl,vf610-dspi", + "fsl,ls1021a-v1.0-dspi", + "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1028a-dspi", + "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), + "fsl,ls2085a-dspi", + "fsl,lx2160a-dspi", - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. @@ -14,11 +19,11 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. -- bus-num : the slave chip chipselect signal number. Optional property: - big-endian: If present the dspi device's registers are implemented in big endian mode. +- bus-num : the slave chip chipselect signal number. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt index a12e3b5c495d..984ae7fd4f94 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MediaTek SoCs +* Serial NOR flash controller for MediaTek ARM SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -13,6 +13,7 @@ Required properties: "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register +- interrupts: Interrupt number used by the controller. - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks the clocks should be named "spi" and "sf". "spi" is used for spi bus, @@ -22,20 +23,16 @@ Required properties: - #address-cells: should be <1> - #size-cells: should be <0> -The SPI flash must be a child of the nor_flash node and must have a -compatible property. Also see jedec,spi-nor.txt. - -Required properties: -- compatible: May include a device-specific string consisting of the manufacturer - and name of the chip. Must also include "jedec,spi-nor" for any - SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number +There should be only one spi slave device following generic spi bindings. +It's not recommended to use this controller for devices other than SPI NOR +flash due to limited transfer capability of this controller. Example: nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; clock-names = "spi", "sf"; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml new file mode 100644 index 000000000000..0ae692dc28b5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SPI Multiplexer + +description: | + This binding describes a SPI bus multiplexer to route the SPI chip select + signals. This can be used when you need more devices than the SPI controller + has chip selects available. An example setup is shown in ASCII art; the actual + setting of the multiplexer to a channel needs to be done by a specific SPI mux + driver. + + MOSI /--------------------------------+--------+--------+--------\ + MISO |/------------------------------+|-------+|-------+|-------\| + SCL ||/----------------------------+||------+||------+||------\|| + ||| ||| ||| ||| ||| + +------------+ ||| ||| ||| ||| + | SoC ||| | +-+++-+ +-+++-+ +-+++-+ +-+++-+ + | ||| | | dev | | dev | | dev | | dev | + | +--+++-+ | CS-X +------+\ +--+--+ +--+--+ +--+--+ +--+--+ + | | SPI +-|-------+ Mux |\\ CS-0 | | | | + | +------+ | +--+---+\\\-------/ CS-1 | | | + | | | \\\----------------/ CS-2 | | + | +------+ | | \\-------------------------/ CS-3 | + | | ? +-|----------/ \----------------------------------/ + | +------+ | + +------------+ + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: spi-mux + + mux-controls: + maxItems: 1 + +required: + - compatible + - reg + - spi-max-frequency + - mux-controls + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + spi@0 { + compatible = "spi-mux"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <100000000>; + + mux-controls = <&mux>; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + }; + + spi-device@1 { + compatible = "lineartechnology,ltc2488"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <10000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt index 2cd67eb727d4..7ac60d9fe357 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt @@ -2,6 +2,9 @@ Required properties: - compatible : Should be "nxp,lx2160a-fspi" + "nxp,imx8qxp-fspi" + "nxp,imx8mm-fspi" + - reg : First contains the register location and length, Second contains the memory mapping address and length - reg-names : Should contain the resource reg names: diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted file mode 100644 index a0edac12d8df..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file mode 100644 index 000000000000..81ad4b761502 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPI Controller + +description: + The Rockchip SPI controller is used to interface with various devices such + as flash and display controllers using the SPI communication interface. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rk3036-spi + - const: rockchip,rk3066-spi + - const: rockchip,rk3228-spi + - const: rockchip,rv1108-spi + - items: + - enum: + - rockchip,px30-spi + - rockchip,rk3188-spi + - rockchip,rk3288-spi + - rockchip,rk3308-spi + - rockchip,rk3328-spi + - rockchip,rk3368-spi + - rockchip,rk3399-spi + - const: rockchip,rk3066-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: transfer-clock + - description: peripheral clock + + clock-names: + items: + - const: spiclk + - const: apb_pclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rx-sample-delay-ns: + default: 0 + description: + Nano seconds to delay after the SCLK edge before sampling Rx data + (may need to be fine tuned for high capacitance lines). + If not specified 0 will be used. + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + description: + Names for the pin configuration(s); may be "default" or "sleep", + where the "sleep" configuration may describe the state + the pins should be in during system suspend. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi1_pins>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; + rx-sample-delay-ns = <10>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index f0d979664f07..e49ecbf715ba 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -49,7 +49,7 @@ properties: dmas: description: | DMA specifiers for tx and rx dma. DMA fifo mode must be used. See - the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt. + the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml. items: - description: rx DMA channel - description: tx DMA channel diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 80bac7a182d5..4b5509436588 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -125,7 +125,7 @@ examples: #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml index d9fdf4809a49..f3e68ed03abf 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -17,7 +17,7 @@ description: |+ "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 23e989e09766..d918cee100ac 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -87,7 +87,7 @@ additionalProperties: false examples: - | - timer { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x400>; interrupts = <22>, diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt index 195792270414..3cb2f4c98d64 100644 --- a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt @@ -11,6 +11,7 @@ Required properties: "moxa,moxart-timer", "faraday,fttmr010" "aspeed,ast2400-timer" "aspeed,ast2500-timer" + "aspeed,ast2600-timer" - reg : Should contain registers location and length - interrupts : Should contain the three timer interrupts usually with diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt index 0b63cebc5f45..91f704951845 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt @@ -10,6 +10,7 @@ Required properties: * ingenic,jz4740-tcu * ingenic,jz4725b-tcu * ingenic,jz4770-tcu + * ingenic,x1000-tcu followed by "simple-mfd". - reg: Should be the offset/length value corresponding to the TCU registers - clocks: List of phandle & clock specifiers for clocks external to the TCU. diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 978de7d37c66..330cab25cc92 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -34,14 +34,6 @@ properties: - adi,adt7461 # +/-1C TDM Extended Temp Range I.C - adt7461 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7473 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7475 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7476 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7490 # Three-Axis Digital Accelerometer - adi,adxl345 # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) @@ -350,6 +342,8 @@ properties: - ti,ads7830 # Temperature Monitoring and Fan Control - ti,amc6821 + # Temperature sensor with 2-wire interface + - ti,lm73 # Temperature sensor with integrated fan control - ti,lm96000 # I2C Touch-Screen Controller diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index 267fce165994..b0e5e0fe9386 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -22,10 +22,14 @@ description: | The DWC3 Glue controls the PHY routing and power, an interrupt line is connected to the Glue to serve as OTG ID change detection. + The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in + host-only mode. + properties: compatible: enum: - amlogic,meson-g12a-usb-ctrl + - amlogic,meson-a1-usb-ctrl ranges: true @@ -84,6 +88,25 @@ required: - phys - dr_mode +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-a1-usb-ctrl + + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: usb_ctrl + - const: usb_bus + - const: xtal_usb_ctrl + required: + - clock-names + examples: - | usb: usb@ffe09000 { diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml new file mode 100644 index 000000000000..06399ba0d9e4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 Facebook Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED USB 2.0 Virtual Hub Controller + +maintainers: + - Benjamin Herrenschmidt <benh@kernel.crashing.org> + +description: |+ + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub + register and several sets of Device and Endpoint registers to support + the Virtual Hub's downstream USB devices. + + Supported number of devices and endpoints vary depending on hardware + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream + devices and 21 generic endpoints. + +properties: + compatible: + enum: + - aspeed,ast2400-usb-vhub + - aspeed,ast2500-usb-vhub + - aspeed,ast2600-usb-vhub + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + aspeed,vhub-downstream-ports: + description: Number of downstream ports supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 5 + minimum: 1 + maximum: 7 + + aspeed,vhub-generic-endpoints: + description: Number of generic endpoints supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 15 + minimum: 1 + maximum: 21 + +required: + - compatible + - reg + - clocks + - interrupts + - aspeed,vhub-downstream-ports + - aspeed,vhub-generic-endpoints + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 71cf7ba32237..6baf00e7d0a9 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -18,27 +18,15 @@ properties: - const: rockchip,rk3066-usb - const: snps,dwc2 - items: - - const: rockchip,px30-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3036-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rv1108-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3188-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3228-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3288-usb + - enum: + - rockchip,px30-usb + - rockchip,rk3036-usb + - rockchip,rk3188-usb + - rockchip,rk3228-usb + - rockchip,rk3288-usb + - rockchip,rk3328-usb + - rockchip,rk3368-usb + - rockchip,rv1108-usb - const: rockchip,rk3066-usb - const: snps,dwc2 - const: lantiq,arx100-usb diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 66780a47ad85..9946ff9ba735 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,7 +7,8 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. - - clock-names: should contain "ref", "bus_early", "suspend" + - clock-names: list of clock names. Ideally should be "ref", + "bus_early", "suspend" but may be less or more. - clocks: list of phandle and clock specifier pairs corresponding to entries in the clock-names property. @@ -36,7 +37,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - - resets: a single pair of phandle and reset specifier + - resets: set of phandle and reset specifier pairs - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command @@ -75,6 +76,8 @@ Optional properties: from P0 to P1/P2/P3 without delay. - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check during HS transmit. + - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in + park mode are disabled. - snps,dis_metastability_quirk: when set, disable metastability workaround. CAUTION: use only if you are absolutely sure of it. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index e6790d2a4da9..67c51759a642 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -35,6 +35,12 @@ Optional properties: the USB data role (USB host or USB device) for a given USB connector, such as Type-C, Type-B(micro). see connector/usb-connector.txt. + - role-switch-default-mode: indicating if usb-role-switch is enabled, the + device default operation mode of controller while usb + role is USB_ROLE_NONE. Valid arguments are "host" and + "peripheral". Defaults to "peripheral" if not + specified. + This is an attribute to a USB controller such as: diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt deleted file mode 100644 index 16808721f3ff..000000000000 --- a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt +++ /dev/null @@ -1,32 +0,0 @@ -Ingenic JZ4740 MUSB driver - -Required properties: - -- compatible: Must be "ingenic,jz4740-musb" -- reg: Address range of the UDC register set -- interrupts: IRQ number related to the UDC hardware -- interrupt-names: must be "mc" -- clocks: phandle to the "udc" clock -- clock-names: must be "udc" -- phys: phandle to the USB PHY - -Example: - -usb_phy: usb-phy@0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; -}; - -udc: usb@13040000 { - compatible = "ingenic,jz4740-musb"; - reg = <0x13040000 0x10000>; - - interrupt-parent = <&intc>; - interrupts = <24>; - interrupt-names = "mc"; - - clocks = <&cgu JZ4740_CLK_UDC>; - clock-names = "udc"; - - phys = <&usb_phy>; -}; diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml new file mode 100644 index 000000000000..a81b0b1a2226 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ4770 USB PHY devicetree bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^usb-phy@.*' + + compatible: + enum: + - ingenic,jz4770-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vcc-supply: + description: VCC power supply + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - vcc-supply + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + vcc-supply = <&vcc>; + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml new file mode 100644 index 000000000000..1d6877875077 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ingenic,musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ47xx USB IP DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^usb@.*' + + compatible: + oneOf: + - enum: + - ingenic,jz4770-musb + - ingenic,jz4740-musb + - items: + - const: ingenic,jz4725b-musb + - const: ingenic,jz4740-musb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: udc + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: mc + + phys: + description: PHY specifier for the USB PHY + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - phys + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + usb_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + udc: usb@13040000 { + compatible = "ingenic,jz4740-musb"; + reg = <0x13040000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <24>; + interrupt-names = "mc"; + + clocks = <&cgu JZ4740_CLK_UDC>; + clock-names = "udc"; + + phys = <&usb_phy>; + }; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml new file mode 100644 index 000000000000..4241d38d5864 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAXIM MAX3420/1 USB Peripheral Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The controller provices USB2.0 compliant FullSpeed peripheral + implementation over the SPI interface. + + Specifications about the part can be found at: + http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf + +properties: + compatible: + enum: + - maxim,max3420-udc + - maxim,max3421-udc + + reg: + maxItems: 1 + + interrupts: + items: + - description: usb irq from max3420 + - description: vbus detection irq + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: udc + - const: vbus + minItems: 1 + maxItems: 2 + + spi-max-frequency: + maximum: 26000000 + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9e67944bec9c..49467b58913f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -205,6 +205,8 @@ patternProperties: description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^coreriver,.*": + description: CORERIVER Semiconductor Co.,Ltd. "^corpro,.*": description: Chengdu Corpro Technology Co., Ltd. "^cortina,.*": @@ -267,6 +269,8 @@ patternProperties: description: Dragino Technology Co., Limited "^dserve,.*": description: dServe Technology B.V. + "^dynaimage,.*": + description: Dyna-Image "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*": @@ -337,12 +341,16 @@ patternProperties: description: Fastrax Oy "^fcs,.*": description: Fairchild Semiconductor + "^feixin,.*": + description: Shenzhen Feixin Photoelectic Co., Ltd "^feiyang,.*": description: Shenzhen Fly Young Technology Co.,LTD. "^firefly,.*": description: Firefly "^focaltech,.*": description: FocalTech Systems Co.,Ltd + "^frida,.*": + description: Shenzhen Frida LCD Co., Ltd. "^friendlyarm,.*": description: Guangzhou FriendlyARM Computer Tech Co., Ltd "^fsl,.*": @@ -421,6 +429,8 @@ patternProperties: description: Shenzhen Hugsun Technology Co. Ltd. "^hwacom,.*": description: HwaCom Systems Inc. + "^hydis,.*": + description: Hydis Technologies "^hyundai,.*": description: Hyundai Technology "^i2se,.*": @@ -553,6 +563,8 @@ patternProperties: description: Linear Technology Corporation "^logicpd,.*": description: Logic PD, Inc. + "^logictechno,.*": + description: Logic Technologies Limited "^longcheer,.*": description: Longcheer Technology (Shanghai) Co., Ltd. "^loongson,.*": @@ -659,6 +671,8 @@ patternProperties: description: Netron DY "^netxeon,.*": description: Shenzhen Netxeon Technology CO., LTD + "^neweast,.*": + description: Guangdong Neweast Optoelectronics CO., LTD "^nexbox,.*": description: Nexbox "^nextthing,.*": diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 7635ab230456..220cf464ed77 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -147,6 +147,10 @@ Note that ``dtbs_check`` will skip any binding schema files with errors. It is necessary to use ``dt_binding_check`` to get all the validation errors in the binding schema files. +It is possible to run both in a single command:: + + make dt_binding_check dtbs_check + It is also possible to run checks with a single schema file by setting the ``DT_SCHEMA_FILES`` variable to a specific schema file. |