diff options
Diffstat (limited to 'Documentation/devicetree')
488 files changed, 12613 insertions, 5662 deletions
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore index 57afa1533a5f..5c6d8ea1a09c 100644 --- a/Documentation/devicetree/bindings/.gitignore +++ b/Documentation/devicetree/bindings/.gitignore @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only *.example.dts processed-schema*.yaml diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml index e4131fa42b26..572381306681 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -21,6 +21,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | clkmgr@ffd04000 { diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index 853d7d2b56f5..66213bd95e6e 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -43,6 +43,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | ao-secure@140 { diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml new file mode 100644 index 000000000000..192ded470e32 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,integrator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Integrator Boards Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + These were the first ARM platforms officially supported by ARM Ltd. + They are ARMv4, ARMv5 and ARMv6-capable using different core tiles, + so the system is modular and can host a variety of CPU tiles called + "core tiles" and referred to in the device tree as "core modules". + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: ARM Integrator Application Platform, this board has a PCI + host and several PCI slots, as well as a number of slots for logical + expansion modules, it is referred to as an "ASIC Development + Motherboard" and is extended with custom FPGA and is intended for + rapid prototyping. See ARM DUI 0098B. This board can physically come + pre-packaged in a PC Tower form factor called Integrator/PP1 or a + special metal fixture called Integrator/PP2, see ARM DUI 0169A. + items: + - const: arm,integrator-ap + - description: ARM Integrator Compact Platform (HBI-0086), this board has + a compact form factor and mainly consists of the bare minimum + peripherals to make use of the core module. See ARM DUI 0159B. + items: + - const: arm,integrator-cp + - description: ARM Integrator Standard Development Board (SDB) Platform, + this board is a PCI-based board conforming to the Microsoft SDB + (HARP) specification. See ARM DUI 0099A. + items: + - const: arm,integrator-sp + + core-module@10000000: + type: object + description: the root node in the Integrator platforms must contain + a core module child node. They are always at physical address + 0x10000000 in all the Integrator variants. + properties: + compatible: + items: + - const: arm,core-module-integrator + - const: syscon + - const: simple-mfd + reg: + maxItems: 1 + + required: + - compatible + - reg + +patternProperties: + "^syscon@[0-9a-f]+$": + description: All Integrator boards must provide a system controller as a + node in the root of the device tree. + type: object + properties: + compatible: + items: + - enum: + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - const: syscon + reg: + maxItems: 1 + + required: + - compatible + - reg + + +required: + - compatible + - core-module@10000000 + +... diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml new file mode 100644 index 000000000000..d6e85d198afe --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,realview.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM RealView Boards Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + The ARM RealView series of reference designs were built to explore the ARM + 11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to + the earlier CPUs such as TrustZone and multicore (MPCore). + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: ARM RealView Emulation Baseboard (HBI-0140) was created + as a generic platform to test different FPGA designs, and has + pluggable CPU modules, see ARM DUI 0303E. + items: + - const: arm,realview-eb + - description: ARM RealView Platform Baseboard for ARM1176JZF-S + (HBI-0147) was created as a development board to test ARM TrustZone, + CoreSight and Intelligent Energy Management (IEM) see ARM DUI 0425F. + items: + - const: arm,realview-pb1176 + - description: ARM RealView Platform Baseboard for ARM 11 MPCore + (HBI-0159, HBI-0175 and HBI-0176) was created to showcase + multiprocessing with ARM11 using MPCore using symmetric + multiprocessing (SMP). See ARM DUI 0351E. + items: + - const: arm,realview-pb11mp + - description: ARM RealView Platform Baseboard for Cortex-A8 (HBI-0178, + HBI-0176 and HBI-0175) was the first reference platform for the + Cortex CPU family, including a Cortex-A8 test chip. + items: + - const: arm,realview-pba8 + - description: ARM RealView Platform Baseboard Explore for Cortex-A9 + (HBI-0182 and HBI-0183) was the reference platform for the Cortex-A9 + CPU. + items: + - const: arm,realview-pbx + + soc: + description: All RealView boards must provide a soc node in the root of the + device tree, representing the System-on-Chip since these test chips are + rather complex. + type: object + properties: + compatible: + oneOf: + - items: + - const: arm,realview-eb-soc + - const: simple-bus + - items: + - const: arm,realview-pb1176-soc + - const: simple-bus + - items: + - const: arm,realview-pb11mp-soc + - const: simple-bus + - items: + - const: arm,realview-pba8-soc + - const: simple-bus + - items: + - const: arm,realview-pbx-soc + - const: simple-bus + + patternProperties: + "^.*syscon@[0-9a-f]+$": + type: object + description: All RealView boards must provide a syscon system controller + node inside the soc node. + properties: + compatible: + oneOf: + - items: + - const: arm,realview-eb11mp-revb-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pb1176-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pb11mp-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pba8-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pbx-syscon + - const: syscon + - const: simple-mfd + + required: + - compatible + - reg + + required: + - compatible + +required: + - compatible + - soc + +... diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml new file mode 100644 index 000000000000..06efd2a075c9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,versatile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Boards Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards + with various pluggable interface boards, in essence the Versatile PB version + is a superset of the Versatile AB version. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: The ARM Versatile Application Baseboard (HBI-0118) is an + evaluation board specifically for the ARM926EJ-S. It can be connected + to an IB1 interface board for a touchscreen-type use case or an IB2 + for a candybar phone-type use case. See ARM DUI 0225D. + items: + - const: arm,versatile-ab + - description: The ARM Versatile Platform Baseboard (HBI-0117) is an + extension of the Versatile Application Baseboard that includes a + PCI host controller. Like the sibling board, it is done specifically + for ARM926EJ-S. See ARM DUI 0224B. + items: + - const: arm,versatile-pb + + core-module@10000000: + type: object + description: the root node in the Versatile platforms must contain + a core module child node. They are always at physical address + 0x10000000 in all the Versatile variants. + properties: + compatible: + items: + - const: arm,core-module-versatile + - const: syscon + - const: simple-mfd + reg: + maxItems: 1 + + required: + - compatible + - reg + +patternProperties: + "^syscon@[0-9a-f]+$": + type: object + description: When fitted with the IB2 Interface Board, the Versatile + AB will present an optional system controller node which controls the + extra peripherals on the interface board. + properties: + compatible: + contains: + const: arm,versatile-ib2-syscon + required: + - compatible + - reg + +required: + - compatible + - core-module@10000000 + +... diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml new file mode 100644 index 000000000000..8c06a73f716c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express and Juno Boards Device Tree Bindings + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + ARM's Versatile Express platform were built as reference designs for exploring + multicore Cortex-A class systems. The Versatile Express family contains both + 32 bit (Aarch32) and 64 bit (Aarch64) systems. + + The board consist of a motherboard and one or more daughterboards (tiles). The + motherboard provides a set of peripherals. Processor and RAM "live" on the + tiles. + + The motherboard and each core tile should be described by a separate Device + Tree source file, with the tile's description including the motherboard file + using an include directive. As the motherboard can be initialized in one of + two different configurations ("memory maps"), care must be taken to include + the correct one. + + When a new generation of boards were introduced under the name "Juno", these + shared to many common characteristics with the Versatile Express that the + "arm,vexpress" compatible was retained in the root node, and these are + included in this binding schema as well. + + The root node indicates the CPU SoC on the core tile, and this + is a daughterboard to the main motherboard. The name used in the compatible + string shall match the name given in the core tile's technical reference + manual, followed by "arm,vexpress" as an additional compatible value. If + further subvariants are released of the core tile, even more fine-granular + compatible strings with up to three compatible strings are used. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: CoreTile Express A9x4 (V2P-CA9) has 4 Cortex A9 CPU cores + in MPCore configuration in a test chip on the core tile. See ARM + DUI 0448I. This was the first Versatile Express platform. + items: + - const: arm,vexpress,v2p-ca9 + - const: arm,vexpress + - description: CoreTile Express A5x2 (V2P-CA5s) has 2 Cortex A5 CPU cores + in a test chip on the core tile. It is intended to evaluate NEON, FPU + and Jazelle support in the Cortex A5 family. See ARM DUI 0541C. + items: + - const: arm,vexpress,v2p-ca5s + - const: arm,vexpress + - description: Coretile Express A15x2 (V2P-CA15) has 2 Cortex A15 CPU + cores in a MPCore configuration in a test chip on the core tile. See + ARM DUI 0604F. + items: + - const: arm,vexpress,v2p-ca15 + - const: arm,vexpress + - description: CoreTile Express A15x4 (V2P-CA15, HBI-0237A) has 4 Cortex + A15 CPU cores in a test chip on the core tile. This is the first test + chip called "TC1". + items: + - const: arm,vexpress,v2p-ca15,tc1 + - const: arm,vexpress,v2p-ca15 + - const: arm,vexpress + - description: Coretile Express A15x2 A7x3 (V2P-CA15_A7) has 2 Cortex A15 + CPU cores and 3 Cortex A7 cores in a big.LITTLE MPCore configuration + in a test chip on the core tile. See ARM DDI 0503I. + items: + - const: arm,vexpress,v2p-ca15_a7 + - const: arm,vexpress + - description: LogicTile Express 20MG (V2F-1XV7) has 2 Cortex A53 CPU + cores in a test chip on the core tile. See ARM DDI 0498D. + items: + - const: arm,vexpress,v2f-1xv7,ca53x2 + - const: arm,vexpress,v2f-1xv7 + - const: arm,vexpress + - description: Arm Versatile Express Juno "r0" (the first Juno board, + V2M-Juno) was introduced as a vehicle for evaluating big.LITTLE on + AArch64 CPU cores. It has 2 Cortex A57 CPU cores and 4 Cortex A53 + cores in a big.LITTLE configuration. It also features the MALI T624 + GPU. See ARM document 100113_0000_07_en. + items: + - const: arm,juno + - const: arm,vexpress + - description: Arm Versatile Express Juno r1 Development Platform + (V2M-Juno r1) was introduced mainly aimed at development of PCIe + based systems. Juno r1 also has support for AXI masters placed on + the TLX connectors to join the coherency domain. Otherwise it is the + same configuration as Juno r0. See ARM document 100122_0100_06_en. + items: + - const: arm,juno-r1 + - const: arm,juno + - const: arm,vexpress + - description: Arm Versatile Express Juno r2 Development Platform + (V2M-Juno r2). It has the same feature set as Juno r0 and r1. See + ARM document 100114_0200_04_en. + items: + - const: arm,juno-r2 + - const: arm,juno + - const: arm,vexpress + - description: Arm AEMv8a Versatile Express Real-Time System Model + (VE RTSM) is a programmers view of the Versatile Express with Arm + v8A hardware. See ARM DUI 0575D. + items: + - const: arm,rtsm_ve,aemv8a + - const: arm,vexpress + - description: Arm FVP (Fixed Virtual Platform) base model revision C + See ARM Document 100964_1190_00_en. + items: + - const: arm,fvp-base-revc + - const: arm,vexpress + - description: Arm Foundation model for Aarch64 + items: + - const: arm,foundation-aarch64 + - const: arm,vexpress + + arm,hbi: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: This indicates the ARM HBI (Hardware Board ID), this is + ARM's unique board model ID, visible on the PCB's silkscreen. + + arm,vexpress,site: + description: As Versatile Express can be configured in number of physically + different setups, the device tree should describe platform topology. + For this reason the root node and main motherboard node must define this + property, describing the physical location of the children nodes. + 0 means motherboard site, while 1 and 2 are daughterboard sites, and + 0xf means "sisterboard" which is the site containing the main CPU tile. + allOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - minimum: 0 + maximum: 15 + + arm,vexpress,position: + description: When daughterboards are stacked on one site, their position + in the stack be be described this attribute. + allOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - minimum: 0 + maximum: 3 + + arm,vexpress,dcc: + description: When describing tiles consisting of more than one DCC, its + number can be specified with this attribute. + allOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - minimum: 0 + maximum: 3 + +patternProperties: + "^bus@[0-9a-f]+$": + description: Static Memory Bus (SMB) node, if this exists it describes + the connection between the motherboard and any tiles. Sometimes the + compatible is placed directly under this node, sometimes it is placed + in a subnode named "motherboard". Sometimes the compatible includes + "arm,vexpress,v2?-p1" sometimes (on software models) is is just + "simple-bus". If the compatible is placed in the "motherboard" node, + it is stricter and always has two compatibles. + type: object + allOf: + - $ref: '/schemas/simple-bus.yaml' + + properties: + compatible: + oneOf: + - items: + - enum: + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 + - const: simple-bus + - const: simple-bus + motherboard: + type: object + description: The motherboard description provides a single "motherboard" + node using 2 address cells corresponding to the Static Memory Bus + used between the motherboard and the tile. The first cell defines the + Chip Select (CS) line number, the second cell address offset within + the CS. All interrupt lines between the motherboard and the tile + are active high and are described using single cell. + properties: + "#address-cells": + const: 2 + "#size-cells": + const: 1 + compatible: + items: + - enum: + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 + - const: simple-bus + arm,v2m-memory-map: + description: This describes the memory map type. + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - enum: + - rs1 + - rs2 + required: + - compatible + required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - arm,vexpress,v2p-ca9 + - arm,vexpress,v2p-ca5s + - arm,vexpress,v2p-ca15 + - arm,vexpress,v2p-ca15_a7 + - arm,vexpress,v2f-1xv7,ca53x2 + then: + required: + - arm,hbi + +... diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards deleted file mode 100644 index 96b1dad58253..000000000000 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ /dev/null @@ -1,237 +0,0 @@ -ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) ------------------------------------------------------------------------------ -ARM's oldest Linux-supported platform with connectors for different core -tiles of ARMv4, ARMv5 and ARMv6 type. - -Required properties (in root node): - compatible = "arm,integrator-ap"; /* Application Platform */ - compatible = "arm,integrator-cp"; /* Compact Platform */ - -FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. - -Required nodes: - -- core-module: the root node to the Integrator platforms must have - a core-module with regs and the compatible string - "arm,core-module-integrator" -- external-bus-interface: the root node to the Integrator platforms - must have an external bus interface with regs and the - compatible-string "arm,external-bus-interface" - - Required properties for the core module: - - regs: the location and size of the core module registers, one - range of 0x200 bytes. - -- syscon: the root node of the Integrator platforms must have a - system controller node pointing to the control registers, - with the compatible string - "arm,integrator-ap-syscon" - "arm,integrator-cp-syscon" - respectively. - - Required properties for the system controller: - - regs: the location and size of the system controller registers, - one range of 0x100 bytes. - - Required properties for the AP system controller: - - interrupts: the AP syscon node must include the logical module - interrupts, stated in order of module instance <module 0>, - <module 1>, <module 2> ... for the CP system controller this - is not required not of any use. - -/dts-v1/; -/include/ "integrator.dtsi" - -/ { - model = "ARM Integrator/AP"; - compatible = "arm,integrator-ap"; - - core-module@10000000 { - compatible = "arm,core-module-integrator"; - reg = <0x10000000 0x200>; - }; - - ebi@12000000 { - compatible = "arm,external-bus-interface"; - reg = <0x12000000 0x100>; - }; - - syscon { - compatible = "arm,integrator-ap-syscon"; - reg = <0x11000000 0x100>; - interrupt-parent = <&pic>; - /* These are the logic module IRQs */ - interrupts = <9>, <10>, <11>, <12>; - }; -}; - - -ARM Versatile Application and Platform Baseboards -------------------------------------------------- -ARM's development hardware platform with connectors for customizable -core tiles. The hardware configuration of the Versatile boards is -highly customizable. - -Required properties (in root node): - compatible = "arm,versatile-ab"; /* Application baseboard */ - compatible = "arm,versatile-pb"; /* Platform baseboard */ - -Interrupt controllers: -- VIC required properties: - compatible = "arm,versatile-vic"; - interrupt-controller; - #interrupt-cells = <1>; - -- SIC required properties: - compatible = "arm,versatile-sic"; - interrupt-controller; - #interrupt-cells = <1>; - -Required nodes: - -- core-module: the root node to the Versatile platforms must have - a core-module with regs and the compatible strings - "arm,core-module-versatile", "syscon" - -Optional nodes: - -- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface - board mounted, this has a separate system controller that is - defined in this node. - Required properties: - compatible = "arm,versatile-ib2-syscon", "syscon" - -ARM RealView Boards -------------------- -The RealView boards cover tailored evaluation boards that are used to explore -the ARM11 and Cortex A-8 and Cortex A-9 processors. - -Required properties (in root node): - /* RealView Emulation Baseboard */ - compatible = "arm,realview-eb"; - /* RealView Platform Baseboard for ARM1176JZF-S */ - compatible = "arm,realview-pb1176"; - /* RealView Platform Baseboard for ARM11 MPCore */ - compatible = "arm,realview-pb11mp"; - /* RealView Platform Baseboard for Cortex A-8 */ - compatible = "arm,realview-pba8"; - /* RealView Platform Baseboard Explore for Cortex A-9 */ - compatible = "arm,realview-pbx"; - -Required nodes: - -- soc: some node of the RealView platforms must be the SoC - node that contain the SoC-specific devices, with the compatible - string set to one of these tuples: - "arm,realview-eb-soc", "simple-bus" - "arm,realview-pb1176-soc", "simple-bus" - "arm,realview-pb11mp-soc", "simple-bus" - "arm,realview-pba8-soc", "simple-bus" - "arm,realview-pbx-soc", "simple-bus" - -- syscon: some subnode of the RealView SoC node must be a - system controller node pointing to the control registers, - with the compatible string set to one of these: - "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon" - "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon" - "arm,realview-eb-syscon", "syscon" - "arm,realview-pb1176-syscon", "syscon" - "arm,realview-pb11mp-syscon", "syscon" - "arm,realview-pba8-syscon", "syscon" - "arm,realview-pbx-syscon", "syscon" - - Required properties for the system controller: - - regs: the location and size of the system controller registers, - one range of 0x1000 bytes. - -Example: - -/dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "ARM RealView PB1176 with device tree"; - compatible = "arm,realview-pb1176"; - #address-cells = <1>; - #size-cells = <1>; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,realview-pb1176-soc", "simple-bus"; - ranges; - - syscon: syscon@10000000 { - compatible = "arm,realview-syscon", "syscon"; - reg = <0x10000000 0x1000>; - }; - - }; -}; - -ARM Versatile Express Boards ------------------------------ -For details on the device tree bindings for ARM Versatile Express boards -please consult the vexpress.txt file in the same directory as this file. - -ARM Juno Boards ----------------- -The Juno boards are targeting development for AArch64 systems. The first -iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64, -with the second iteration, Juno r1, mainly aimed at development of PCIe -based systems. Juno r1 also has support for AXI masters placed on the TLX -connectors to join the coherency domain. - -Juno boards are described in a similar way to ARM Versatile Express boards, -with the motherboard part of the hardware being described in a separate file -to highlight the fact that is part of the support infrastructure for the SoC. -Juno device tree bindings also share the Versatile Express bindings as -described under the RS1 memory mapping. - -Required properties (in root node): - compatible = "arm,juno"; /* For Juno r0 board */ - compatible = "arm,juno-r1"; /* For Juno r1 board */ - compatible = "arm,juno-r2"; /* For Juno r2 board */ - -Required nodes: -The description for the board must include: - - a "psci" node describing the boot method used for the secondary CPUs. - A detailed description of the bindings used for "psci" nodes is present - in the psci.yaml file. - - a "cpus" node describing the available cores and their associated - "enable-method"s. For more details see cpus.yaml file. - -Example: - -/dts-v1/; -/ { - model = "ARM Juno development board (r0)"; - compatible = "arm,juno", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - A57_0: cpu@0 { - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - device_type = "cpu"; - enable-method = "psci"; - }; - - ..... - - A53_0: cpu@100 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - device_type = "cpu"; - enable-method = "psci"; - }; - - ..... - }; - -}; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt deleted file mode 100644 index e3f996920403..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom Kona Family CPU Enable Method --------------------------------------- -This binding defines the enable method used for starting secondary -CPUs in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 - -The enable method is specified by defining the following required -properties in the "cpu" device tree node: - - enable-method = "brcm,bcm11351-cpu-method"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register used to request the ROM holding pen -code release a secondary CPU. The value written to the register is -formed by encoding the target CPU id into the low bits of the -physical start address it should jump to. - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x3500417c>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt deleted file mode 100644 index 0ff6560e6094..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt +++ /dev/null @@ -1,10 +0,0 @@ -Broadcom BCM11351 device tree bindings -------------------------------------------- - -Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140, -bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties: - -Required root node property: - -compatible = "brcm,bcm11351"; -DEPRECATED: compatible = "bcm,bcm11351"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml new file mode 100644 index 000000000000..b5ef2666e6b2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM11351 device tree bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm28155-ap + - const: brcm,bcm11351 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt deleted file mode 100644 index e0774255e1a6..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM21664 device tree bindings --------------------------------------- - -This document describes the device tree bindings for boards with the BCM21664 -SoC. - -Required root node property: - - compatible: brcm,bcm21664 - -Example: - / { - model = "BCM21664 SoC"; - compatible = "brcm,bcm21664"; - [...] - } diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml new file mode 100644 index 000000000000..aafbd6a27708 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM21664 device tree bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm21664-garnet + - const: brcm,bcm21664 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt deleted file mode 100644 index a3af54c0e404..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom Kona Family CPU Enable Method --------------------------------------- -This binding defines the enable method used for starting secondary -CPUs in the following Broadcom SoCs: - BCM23550 - -The enable method is specified by defining the following required -properties in the "cpu" device tree node: - - enable-method = "brcm,bcm23550"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register used to request the ROM holding pen -code release a secondary CPU. The value written to the register is -formed by encoding the target CPU id into the low bits of the -physical start address it should jump to. - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "brcm,bcm23550"; - secondary-boot-reg = <0x3500417c>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt deleted file mode 100644 index 080baad923d6..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM23550 device tree bindings --------------------------------------- - -This document describes the device tree bindings for boards with the BCM23550 -SoC. - -Required root node property: - - compatible: brcm,bcm23550 - -Example: - / { - model = "BCM23550 SoC"; - compatible = "brcm,bcm23550"; - [...] - } diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml new file mode 100644 index 000000000000..c4b4efd28a55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 device tree bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm23550-sparrow + - const: brcm,bcm23550 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt deleted file mode 100644 index 8608a776caa7..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM4708 device tree bindings -------------------------------------------- - -Boards with the BCM4708 SoC shall have the following properties: - -Required root node property: - -bcm4708 -compatible = "brcm,bcm4708"; - -bcm4709 -compatible = "brcm,bcm4709"; - -bcm53012 -compatible = "brcm,bcm53012"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml new file mode 100644 index 000000000000..d48313c7ae45 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4708 device tree bindings + +description: + Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based + on the iProc architecture (Northstar). + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + - Hauke Mehrtens <hauke@hauke-m.de> + - Rafal Milecki <zajec5@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM4708 based boards + items: + - enum: + - asus,rt-ac56u + - asus,rt-ac68u + - buffalo,wzr-1750dhp + - linksys,ea6300-v1 + - linksys,ea6500-v2 + - luxul,xap-1510v1 + - luxul,xwc-1000 + - netgear,r6250v1 + - netgear,r6300v2 + - smartrg,sr400ac + - brcm,bcm94708 + - const: brcm,bcm4708 + + - description: BCM47081 based boards + items: + - enum: + - asus,rt-n18u + - buffalo,wzr-600dhp2 + - buffalo,wzr-900dhp + - luxul,xap-1410v1 + - luxul,xwr-1200v1 + - tplink,archer-c5-v2 + - const: brcm,bcm47081 + - const: brcm,bcm4708 + + - description: BCM4709 based boards + items: + - enum: + - asus,rt-ac87u + - buffalo,wxr-1900dhp + - linksys,ea9200 + - netgear,r7000 + - netgear,r8000 + - tplink,archer-c9-v1 + - brcm,bcm94709 + - const: brcm,bcm4709 + - const: brcm,bcm4708 + + - description: BCM47094 based boards + items: + - enum: + - dlink,dir-885l + - linksys,panamera + - luxul,abr-4500-v1 + - luxul,xap-1610-v1 + - luxul,xbr-4500-v1 + - luxul,xwc-2000-v1 + - luxul,xwr-3100v1 + - luxul,xwr-3150-v1 + - netgear,r8500 + - phicomm,k3 + - const: brcm,bcm47094 + - const: brcm,bcm4708 + + - description: BCM53012 based boards + items: + - enum: + - brcm,bcm953012er + - brcm,bcm953012hr + - brcm,bcm953012k + - const: brcm,brcm53012 + - const: brcm,bcm4708 +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt deleted file mode 100644 index 4c77169bb534..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt +++ /dev/null @@ -1,31 +0,0 @@ -Broadcom Cygnus device tree bindings ------------------------------------- - - -Boards with Cygnus SoCs shall have the following properties: - -Required root node property: - -BCM11300 -compatible = "brcm,bcm11300", "brcm,cygnus"; - -BCM11320 -compatible = "brcm,bcm11320", "brcm,cygnus"; - -BCM11350 -compatible = "brcm,bcm11350", "brcm,cygnus"; - -BCM11360 -compatible = "brcm,bcm11360", "brcm,cygnus"; - -BCM58300 -compatible = "brcm,bcm58300", "brcm,cygnus"; - -BCM58302 -compatible = "brcm,bcm58302", "brcm,cygnus"; - -BCM58303 -compatible = "brcm,bcm58303", "brcm,cygnus"; - -BCM58305 -compatible = "brcm,bcm58305", "brcm,cygnus"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml new file mode 100644 index 000000000000..fe111e72dac3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Cygnus device tree bindings + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm11300 + - brcm,bcm11320 + - brcm,bcm11350 + - brcm,bcm11360 + - brcm,bcm58300 + - brcm,bcm58302 + - brcm,bcm58303 + - brcm,bcm58305 + - const: brcm,cygnus + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt deleted file mode 100644 index a124c7fc4dcd..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt +++ /dev/null @@ -1,14 +0,0 @@ -Broadcom Hurricane 2 device tree bindings ---------------------------------------- - -Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs -are based on Broadcom's iProc SoC architecture and feature a single core Cortex -A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND -flash and a PCIe attached integrated switching engine. - -Boards with Hurricane SoCs shall have the following properties: - -Required root node property: - -BCM53342 -compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml new file mode 100644 index 000000000000..1158f49b0b83 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Hurricane 2 device tree bindings + +description: + Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs + are based on Broadcom's iProc SoC architecture and feature a single core Cortex + A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND + flash and a PCIe attached integrated switching engine. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ubnt,unifi-switch8 + - const: brcm,bcm53342 + - const: brcm,hr2 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt deleted file mode 100644 index 35f056f4a1c3..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt +++ /dev/null @@ -1,9 +0,0 @@ -Broadcom North Star 2 (NS2) device tree bindings ------------------------------------------------- - -Boards with NS2 shall have the following properties: - -Required root node property: - -NS2 SVK board -compatible = "brcm,ns2-svk", "brcm,ns2"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml new file mode 100644 index 000000000000..2451704f87f0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom North Star 2 (NS2) device tree bindings + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,ns2-svk + - brcm,ns2-xmc + - const: brcm,ns2 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt deleted file mode 100644 index 677ef9d9f445..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom Northstar Plus SoC CPU Enable Method ---------------------------------------------- -This binding defines the enable method used for starting secondary -CPU in the following Broadcom SoCs: - BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 - -The enable method is specified by defining the following required -properties in the corresponding secondary "cpu" device tree node: - - enable-method = "brcm,bcm-nsp-smp"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register which should hold the common -entry point for a secondary CPU. This entry is cpu node specific -and should be added per cpu. E.g., in case of NSP (BCM58625) which -is a dual core CPU SoC, this entry should be added to cpu1 node. - - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - enable-method = "brcm,bcm-nsp-smp"; - secondary-boot-reg = <0xffff042c>; - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt deleted file mode 100644 index eae53e4556be..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt +++ /dev/null @@ -1,34 +0,0 @@ -Broadcom Northstar Plus device tree bindings --------------------------------------------- - -Broadcom Northstar Plus family of SoCs are used for switching control -and management applications as well as residential router/gateway -applications. The SoC features dual core Cortex A9 ARM CPUs, integrating -several peripheral interfaces including multiple Gigabit Ethernet PHYs, -DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, -SATA and several other IO controllers. - -Boards with Northstar Plus SoCs shall have the following properties: - -Required root node property: - -BCM58522 -compatible = "brcm,bcm58522", "brcm,nsp"; - -BCM58525 -compatible = "brcm,bcm58525", "brcm,nsp"; - -BCM58535 -compatible = "brcm,bcm58535", "brcm,nsp"; - -BCM58622 -compatible = "brcm,bcm58622", "brcm,nsp"; - -BCM58623 -compatible = "brcm,bcm58623", "brcm,nsp"; - -BCM58625 -compatible = "brcm,bcm58625", "brcm,nsp"; - -BCM88312 -compatible = "brcm,bcm88312", "brcm,nsp"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml new file mode 100644 index 000000000000..fe364cebf57f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Plus device tree bindings + +description: + Broadcom Northstar Plus family of SoCs are used for switching control + and management applications as well as residential router/gateway + applications. The SoC features dual core Cortex A9 ARM CPUs, integrating + several peripheral interfaces including multiple Gigabit Ethernet PHYs, + DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, + SATA and several other IO controllers. + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm58522 + - brcm,bcm58525 + - brcm,bcm58535 + - brcm,bcm58622 + - brcm,bcm58623 + - brcm,bcm58625 + - brcm,bcm88312 + - const: brcm,nsp + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt deleted file mode 100644 index 23a02178dd44..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt +++ /dev/null @@ -1,12 +0,0 @@ -Broadcom Stingray device tree bindings ------------------------------------------------- - -Boards with Stingray shall have the following properties: - -Required root node property: - -Stingray Combo SVK board -compatible = "brcm,bcm958742k", "brcm,stingray"; - -Stingray SST100 board -compatible = "brcm,bcm958742t", "brcm,stingray"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml new file mode 100644 index 000000000000..4ad2b2124ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray device tree bindings + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm958742k + - brcm,bcm958742t + - brcm,bcm958802a802x + - const: brcm,stingray + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt deleted file mode 100644 index 223ed3471c08..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt +++ /dev/null @@ -1,10 +0,0 @@ -Broadcom Vulcan device tree bindings ------------------------------------- - -Boards with Broadcom Vulcan shall have the following root property: - -Broadcom Vulcan Evaluation Board: - compatible = "brcm,vulcan-eval", "brcm,vulcan-soc"; - -Generic Vulcan board: - compatible = "brcm,vulcan-soc"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml new file mode 100644 index 000000000000..c5b6f31c20b9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Vulcan device tree bindings + +maintainers: + - Robert Richter <rrichter@marvell.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,vulcan-eval + - cavium,thunderx2-cn9900 + - const: brcm,vulcan-soc + +... diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml new file mode 100644 index 000000000000..3db3642bd532 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -0,0 +1,336 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Cross Trigger Interface (CTI) device. + +description: | + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected + to one or more CoreSight components and/or a CPU, with CTIs interconnected in + a star topology via the Cross Trigger Matrix (CTM), which is not programmable. + The ECT components are not part of the trace generation data path and are thus + not part of the CoreSight graph described in the general CoreSight bindings + file coresight.txt. + + The CTI component properties define the connections between the individual + CTI and the components it is directly connected to, consisting of input and + output hardware trigger signals. CTIs can have a maximum number of input and + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The + number is defined at design time, the maximum of each defined in the DEVID + register. + + CTIs are interconnected in a star topology via the CTM, using a number of + programmable channels, usually 4, but again implementation defined and + described in the DEVID register. The star topology is not required to be + described in the bindings as the actual connections are software + programmable. + + In general the connections between CTI and components via the trigger signals + are implementation defined, except when the CTI is connected to an ARM v8 + architecture core and optional ETM. + + In this case the ARM v8 architecture defines the required signal connections + between CTI and the CPU core and ETM if present. In the case of a v8 + architecturally connected CTI an additional compatible string is used to + indicate this feature (arm,coresight-cti-v8-arch). + + When CTI trigger connection information is unavailable then a minimal driver + binding can be declared with no explicit trigger signals. This will result + the driver detecting the maximum available triggers and channels from the + DEVID register and make them all available for use as a single default + connection. Any user / client application will require additional information + on the connections between the CTI and other components for correct operation. + This information might be found by enabling the Integration Test registers in + the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel + configuration). These registers may be used to explore the trigger connections + between CTI and other CoreSight components. + + Certain triggers between CoreSight devices and the CTI have specific types + and usages. These can be defined along with the signal indexes with the + constants defined in <dt-bindings/arm/coresight-cti-dt.h> + + For example a CTI connected to a core will usually have a DBGREQ signal. This + is defined in the binding as type PE_EDBGREQ. These types will appear in an + optional array alongside the signal indexes. Omitting types will default all + signals to GEN_IO. + + Note that some hardware trigger signals can be connected to non-CoreSight + components (e.g. UART etc) depending on hardware implementation. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,coresight-cti + required: + - compatible + +properties: + $nodename: + pattern: "^cti(@[0-9a-f]+)$" + compatible: + oneOf: + - items: + - const: arm,coresight-cti + - const: arm,primecell + - items: + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell + + reg: + maxItems: 1 + + cpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Handle to cpu this device is associated with. This must appear in the + base cti node if compatible string arm,coresight-cti-v8-arch is used, + or may appear in a trig-conns child node when appropriate. + + arm,cti-ctm-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the CTM this CTI is connected to, in large systems with multiple + separate CTI/CTM nets. Typically multi-socket systems where the CTM is + propagated between sockets. + + arm,cs-dev-assoc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. Use in a trig-conns node, or in CTI base node when + compatible string arm,coresight-cti-v8-arch used. If the associated + device has not been registered then the node name will be stored as + the connection name for later resolution. If the associated device is + not a CoreSight device or not registered then the node name will remain + the connection name and automatic enabling will not occur. + + # size cells and address cells required if trig-conns node present. + "#size-cells": + const: 0 + + "#address-cells": + const: 1 + +patternProperties: + '^trig-conns@([0-9]+)$': + type: object + description: + A trigger connections child node which describes the trigger signals + between this CTI and another hardware device. This device may be a CPU, + CoreSight device, any other hardware device or simple external IO lines. + The connection may have both input and output triggers, or only one or the + other. + + properties: + reg: + maxItems: 1 + + arm,trig-in-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger in signal numbers in use by a trig-conns node. + + arm,trig-in-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger in + signals. Types in this array match to the corresponding signal in the + arm,trig-in-sigs array. If the -types array is smaller, or omitted + completely, then the types will default to GEN_IO. + + arm,trig-out-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signal numbers in use by a trig-conns node. + + arm,trig-out-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger out + signals. Types in this array match to the corresponding signal + in the arm,trig-out-sigs array. If the "-types" array is smaller, + or omitted completely, then the types will default to GEN_IO. + + arm,trig-filters: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signals that will be blocked from becoming + active, unless filtering is disabled on the driver. + + arm,trig-conn-name: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + description: + Defines a connection name that will be displayed, if the cpu or + arm,cs-dev-assoc properties are not being used in this connection. + Principle use for CTI that are connected to non-CoreSight devices, or + external IO. + + anyOf: + - required: + - arm,trig-in-sigs + - required: + - arm,trig-out-sigs + oneOf: + - required: + - arm,trig-conn-name + - required: + - cpu + - required: + - arm,cs-dev-assoc + required: + - reg + +required: + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: arm,coresight-cti-v8-arch + +then: + required: + - cpu + +examples: + # minimum CTI definition. DEVID register used to set number of triggers. + - | + cti@20020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20020000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + # v8 architecturally defined CTI - CPU + ETM connections generated by the + # driver according to the v8 architecture specification. + - | + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + # Implementation defined CTI - CPU + ETM connections explicitly defined.. + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h + # #size-cells and #address-cells are required if trig-conns@ nodes present. + - | + #include <dt-bindings/arm/coresight-cti-dt.h> + + cti@858000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-ctm-id = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT>; + arm,trig-out-sigs = <4 5 6 7>; + arm,trig-out-types = <ETM_EXTIN + ETM_EXTIN + ETM_EXTIN + ETM_EXTIN>; + arm,cs-dev-assoc = <&etm0>; + }; + + trig-conns@1 { + reg = <1>; + cpu = <&CPU0>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <PE_DBGTRIGGER + PE_PMUIRQ>; + arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-types = <PE_EDBGREQ + PE_DBGRESTART + PE_CTIIRQ>; + + arm,trig-filters = <0>; + }; + }; + # Implementation defined CTI - non CoreSight component connections. + - | + cti@20110000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<1 6>; + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d02c42d21f2f..846f6daae71b 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -45,6 +45,10 @@ its hardware characteristcs. - Coresight Address Translation Unit (CATU) "arm,coresight-catu", "arm,primecell"; + - Coresight Cross Trigger Interface (CTI): + "arm,coresight-cti", "arm,primecell"; + See coresight-cti.yaml for full CTI definitions. + * reg: physical base address and length of the register set(s) of the component. @@ -72,6 +76,9 @@ its hardware characteristcs. * reg-names: the only acceptable values are "stm-base" and "stm-stimulus-base", each corresponding to the areas defined in "reg". +* Required properties for Coresight Cross Trigger Interface (CTI) + See coresight-cti.yaml for full CTI definitions. + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators and non-configurable funnels: diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 0d5b61056b10..a01814765ddb 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -123,11 +123,18 @@ properties: - arm,cortex-a12 - arm,cortex-a15 - arm,cortex-a17 + - arm,cortex-a32 + - arm,cortex-a34 + - arm,cortex-a35 - arm,cortex-a53 - arm,cortex-a55 - arm,cortex-a57 + - arm,cortex-a65 - arm,cortex-a72 - arm,cortex-a73 + - arm,cortex-a75 + - arm,cortex-a76 + - arm,cortex-a77 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -136,6 +143,8 @@ properties: - arm,cortex-r4 - arm,cortex-r5 - arm,cortex-r7 + - arm,neoverse-e1 + - arm,neoverse-n1 - brcm,brahma-b15 - brcm,brahma-b53 - brcm,vulcan @@ -155,6 +164,8 @@ properties: - nvidia,tegra194-carmel - qcom,krait - qcom,kryo + - qcom,kryo260 + - qcom,kryo280 - qcom,kryo385 - qcom,kryo485 - qcom,scorpion @@ -201,6 +212,8 @@ properties: - rockchip,rk3066-smp - socionext,milbeaut-m10v-smp - ste,dbx500-smp + - ti,am3352 + - ti,am4372 cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64' @@ -287,6 +300,39 @@ properties: While optional, it is the preferred way to get access to the cpu-core power-domains. + secondary-boot-reg: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + Required for systems that have an "enable-method" property value of + "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp". + + This includes the following SoCs: | + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550 + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + + The secondary-boot-reg property is a u32 value that specifies the + physical address of the register used to request the ROM holding pen + code release a secondary CPU. The value written to the register is + formed by encoding the target CPU id into the low bits of the + physical start address it should jump to. + +if: + # If the enable-method property contains one of those values + properties: + enable-method: + contains: + enum: + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm-nsp-smp + # and if enable-method is present + required: + - enable-method + +then: + required: + - secondary-boot-reg + required: - device_type - reg diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index e07735a8c2c7..8cac6fafaab0 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -164,7 +164,7 @@ Required properties: - compatible: should be: "fsl,imx8qxp-sc-key" followed by "fsl,imx-sc-key"; -- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt +- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml Example (imx8qxp): ------------- diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0e17e1f6fb80..cd3fbe7e3948 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -119,6 +119,10 @@ properties: - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite - fsl,imx6q-sabresd + - technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf + - technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit + - technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph + - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - toradex,apalis_imx6q # Apalis iMX6 Module @@ -166,6 +170,10 @@ properties: - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf + - technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit + - technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph + - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Module @@ -225,6 +233,9 @@ properties: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board - kontron,imx6ul-n6310-som # Kontron N6310 SOM - kontron,imx6ul-n6311-som # Kontron N6311 SOM + - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf + - technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit + - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi - const: fsl,imx6ul - description: Kontron N6310 S Board @@ -274,6 +285,7 @@ properties: items: - enum: - toradex,colibri-imx7s # Colibri iMX7 Solo Module + - toradex,colibri-imx7s-aster # Colibri iMX7 Solo Module on Aster Carrier Board - toradex,colibri-imx7s-eval-v3 # Colibri iMX7 Solo Module on Colibri Evaluation Board V3 - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM - const: fsl,imx7s @@ -284,8 +296,14 @@ properties: - fsl,imx7d-sdb # i.MX7 SabreSD Board - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board + - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf + - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit + - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph + - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi - toradex,colibri-imx7d # Colibri iMX7 Dual Module + - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module + - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3 - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3 - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM @@ -324,6 +342,12 @@ properties: - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - const: fsl,imx8mn + - description: i.MX8MP based Boards + items: + - enum: + - fsl,imx8mp-evk # i.MX8MP EVK Board + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -395,6 +419,51 @@ properties: - fsl,ls1021a-twr - const: fsl,ls1021a + - description: LS1028A based Boards + items: + - enum: + - fsl,ls1028a-qds + - fsl,ls1028a-rdb + - const: fsl,ls1028a + + - description: Kontron KBox A-230-LS + items: + - const: kontron,kbox-a-230-ls + - const: kontron,sl28-var4 + - const: kontron,sl28 + - const: fsl,ls1028a + - description: + Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0 + items: + - enum: + - kontron,sl28-var2-ads2 + - kontron,sl28-var3-ads2 + - kontron,sl28-var4-ads2 + - enum: + - kontron,sl28-var2 + - kontron,sl28-var3 + - kontron,sl28-var4 + - const: kontron,sl28 + - const: fsl,ls1028a + + - description: + Kontron SMARC-sAL28 board (on a generic/undefined carrier) + items: + - enum: + - kontron,sl28-var2 + - kontron,sl28-var3 + - kontron,sl28-var4 + - const: kontron,sl28 + - const: fsl,ls1028a + + - description: + Kontron SMARC-sAL28 board (base). This is used in the base device + tree which is compatible with the overlays provided by the + vendor. + items: + - const: kontron,sl28 + - const: fsl,ls1028a + - description: LS1043A based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index 913a8cd8b2c0..5d1d50eea26e 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -29,27 +29,30 @@ allOf: properties: compatible: - enum: - - arm,pl310-cache - - arm,l220-cache - - arm,l210-cache - # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" - - bcm,bcm11351-a2-pl310-cache - # For Broadcom bcm11351 chipset where an - # offset needs to be added to the address before passing down to the L2 - # cache controller - - brcm,bcm11351-a2-pl310-cache - # Marvell Controller designed to be - # compatible with the ARM one, with system cache mode (meaning - # maintenance operations on L1 are broadcasted to the L2 and L2 - # performs the same operation). - - marvell,aurora-system-cache - # Marvell Controller designed to be - # compatible with the ARM one with outer cache mode. - - marvell,aurora-outer-cache - # Marvell Tauros3 cache controller, compatible - # with arm,pl310-cache controller. - - marvell,tauros3-cache + oneOf: + - enum: + - arm,pl310-cache + - arm,l220-cache + - arm,l210-cache + # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + - bcm,bcm11351-a2-pl310-cache + # For Broadcom bcm11351 chipset where an + # offset needs to be added to the address before passing down to the L2 + # cache controller + - brcm,bcm11351-a2-pl310-cache + # Marvell Controller designed to be + # compatible with the ARM one, with system cache mode (meaning + # maintenance operations on L1 are broadcasted to the L2 and L2 + # performs the same operation). + - marvell,aurora-system-cache + # Marvell Controller designed to be + # compatible with the ARM one with outer cache mode. + - marvell,aurora-outer-cache + - items: + # Marvell Tauros3 cache controller, compatible + # with arm,pl310-cache controller. + - const: marvell,tauros3-cache + - const: arm,pl310-cache cache-level: const: 2 diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml index 818dfe6de512..3235ec9e9bad 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml @@ -28,8 +28,11 @@ properties: items: - enum: - mrvl,mmp2-brownstone + - olpc,xo-1.75 - const: mrvl,mmp2 - description: MMP3 based boards items: - - const: mrvl,mmp3 + - enum: + - dell,wyse-ariel + - const: marvell,mmp3 ... diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 79902f470e4b..c3a8604dfa80 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -43,6 +43,8 @@ required: - reg-names - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 52ae094ce330..97df36d301c9 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -20,27 +20,36 @@ properties: items: - enum: - apm,potenza-pmu - - arm,armv8-pmuv3 - - arm,cortex-a73-pmu - - arm,cortex-a72-pmu - - arm,cortex-a57-pmu - - arm,cortex-a53-pmu - - arm,cortex-a35-pmu - - arm,cortex-a17-pmu - - arm,cortex-a15-pmu - - arm,cortex-a12-pmu - - arm,cortex-a9-pmu - - arm,cortex-a8-pmu - - arm,cortex-a7-pmu - - arm,cortex-a5-pmu - - arm,arm11mpcore-pmu - - arm,arm1176-pmu + - arm,armv8-pmuv3 # Only for s/w models - arm,arm1136-pmu + - arm,arm1176-pmu + - arm,arm11mpcore-pmu + - arm,cortex-a5-pmu + - arm,cortex-a7-pmu + - arm,cortex-a8-pmu + - arm,cortex-a9-pmu + - arm,cortex-a12-pmu + - arm,cortex-a15-pmu + - arm,cortex-a17-pmu + - arm,cortex-a32-pmu + - arm,cortex-a34-pmu + - arm,cortex-a35-pmu + - arm,cortex-a53-pmu + - arm,cortex-a55-pmu + - arm,cortex-a57-pmu + - arm,cortex-a65-pmu + - arm,cortex-a72-pmu + - arm,cortex-a73-pmu + - arm,cortex-a75-pmu + - arm,cortex-a76-pmu + - arm,cortex-a77-pmu + - arm,neoverse-e1-pmu + - arm,neoverse-n1-pmu - brcm,vulcan-pmu - cavium,thunder-pmu + - qcom,krait-pmu - qcom,scorpion-pmu - qcom,scorpion-mp-pmu - - qcom,krait-pmu interrupts: # Don't know how many CPUs, so no constraints to specify diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 5e66934455bb..9247b58c26fc 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -32,6 +32,9 @@ description: |+ http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf properties: + $nodename: + const: psci + compatible: oneOf: - description: @@ -141,6 +144,8 @@ allOf: - cpu_off - cpu_on +additionalProperties: false + examples: - |+ diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 5976c0b16b65..64ddae3bd39f 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -28,6 +28,7 @@ description: | apq8074 apq8084 apq8096 + ipq6018 ipq8074 mdm9615 msm8916 @@ -41,6 +42,7 @@ description: | The 'board' element must be one of the following strings: cdp + cp01-c1 dragonboard hk01 idp @@ -150,4 +152,10 @@ properties: - enum: - qcom,sc7180-idp - const: qcom,sc7180 + + - items: + - enum: + - qcom,ipq6018-cp01-c1 + - const: qcom,ipq6018 + ... diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml index 7f8d17f33983..dd087643a9f8 100644 --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml @@ -27,6 +27,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | prr: chipid@ff000044 { diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 9436124c5809..611094d9186b 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -208,6 +208,7 @@ properties: - description: R-Car M3-W+ (R8A77961) items: - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0)) - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A) - const: renesas,r8a77961 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 874b0eaa2a75..715586dea9bb 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -402,6 +402,11 @@ properties: - const: phytec,rk3288-phycore-som - const: rockchip,rk3288 + - description: Pine64 PinebookPro + items: + - const: pine64,pinebook-pro + - const: rockchip,rk3399 + - description: Pine64 Rock64 items: - const: pine64,rock64 @@ -443,7 +448,7 @@ properties: - description: Rockchip Kylin items: - - const: rockchip,kylin-rk3036 + - const: rockchip,rk3036-kylin - const: rockchip,rk3036 - description: Rockchip PX3 Evaluation board @@ -468,6 +473,11 @@ properties: - const: rockchip,r88 - const: rockchip,rk3368 + - description: Rockchip RK3036 Evaluation board + items: + - const: rockchip,rk3036-evb + - const: rockchip,rk3036 + - description: Rockchip RK3228 Evaluation board items: - const: rockchip,rk3228-evb diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index afcd70803c12..0425d333b50d 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -30,6 +30,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | chipid@10000000 { diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml index 73b56fc5bf58..c9651892710e 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml @@ -89,6 +89,8 @@ required: - clock-names - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clock/exynos5250.h> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml index 51d23b6f8a94..3d9abad3c749 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml @@ -23,6 +23,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | firmware@203f000 { diff --git a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt deleted file mode 100644 index d27a646f48a9..000000000000 --- a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt +++ /dev/null @@ -1,60 +0,0 @@ -UniPhier outer cache controller - -UniPhier SoCs are integrated with a full-custom outer cache controller system. -All of them have a level 2 cache controller, and some have a level 3 cache -controller as well. - -Required properties: -- compatible: should be "socionext,uniphier-system-cache" -- reg: offsets and lengths of the register sets for the device. It should - contain 3 regions: control register, revision register, operation register, - in this order. -- cache-unified: specifies the cache is a unified cache. -- cache-size: specifies the size in bytes of the cache -- cache-sets: specifies the number of associativity sets of the cache -- cache-line-size: specifies the line size in bytes -- cache-level: specifies the level in the cache hierarchy. The value should - be 2 for L2 cache, 3 for L3 cache, etc. - -Optional properties: -- next-level-cache: phandle to the next level cache if present. The next level - cache should be also compatible with "socionext,uniphier-system-cache". - -The L2 cache must exist to use the L3 cache; the cache hierarchy must be -indicated correctly with "next-level-cache" properties. - -Example 1 (system with L2): - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - cache-unified; - cache-size = <0x80000>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - -Example 2 (system with L2 and L3): - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, - <0x506c0000 0x400>; - cache-unified; - cache-size = <0x200000>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - next-level-cache = <&l3>; - }; - - l3: l3-cache@500c8000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, - <0x506c8000 0x400>; - cache-unified; - cache-size = <0x400000>; - cache-sets = <512>; - cache-line-size = <256>; - cache-level = <3>; - }; diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml new file mode 100644 index 000000000000..2e765bb3e6f6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier outer cache controller + +description: | + UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache + controller system. All of them have a level 2 cache controller, and some + have a level 3 cache controller as well. + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + const: socionext,uniphier-system-cache + + reg: + description: | + should contain 3 regions: control register, revision register, + operation register, in this order. + minItems: 3 + maxItems: 3 + + interrupts: + description: | + Interrupts can be used to notify the completion of cache operations. + The number of interrupts should match to the number of CPU cores. + The specified interrupts correspond to CPU0, CPU1, ... in this order. + minItems: 1 + maxItems: 4 + + cache-unified: true + + cache-size: true + + cache-sets: true + + cache-line-size: true + + cache-level: + minimum: 2 + maximum: 3 + + next-level-cache: true + +allOf: + - $ref: /schemas/cache-controller.yaml# + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - cache-unified + - cache-size + - cache-sets + - cache-line-size + - cache-level + +examples: + - | + // System with L2. + cache-controller@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <0x140000>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + - | + // System with L2 and L3. + // L2 should specify the next level cache by 'next-level-cache'. + l2: cache-controller@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <0x200000>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: cache-controller@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <0x200000>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt deleted file mode 100644 index b3ed1033740e..000000000000 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt +++ /dev/null @@ -1,47 +0,0 @@ -Socionext UniPhier SoC family ------------------------------ - -Required properties in the root node: - - compatible: should contain board and SoC compatible strings - -SoC and board compatible strings: - (sorted chronologically) - - - LD4 SoC: "socionext,uniphier-ld4" - - Reference Board: "socionext,uniphier-ld4-ref" - - - Pro4 SoC: "socionext,uniphier-pro4" - - Reference Board: "socionext,uniphier-pro4-ref" - - Ace Board: "socionext,uniphier-pro4-ace" - - Sanji Board: "socionext,uniphier-pro4-sanji" - - - sLD8 SoC: "socionext,uniphier-sld8" - - Reference Board: "socionext,uniphier-sld8-ref" - - - PXs2 SoC: "socionext,uniphier-pxs2" - - Gentil Board: "socionext,uniphier-pxs2-gentil" - - Vodka Board: "socionext,uniphier-pxs2-vodka" - - - LD6b SoC: "socionext,uniphier-ld6b" - - Reference Board: "socionext,uniphier-ld6b-ref" - - - LD11 SoC: "socionext,uniphier-ld11" - - Reference Board: "socionext,uniphier-ld11-ref" - - Global Board: "socionext,uniphier-ld11-global" - - - LD20 SoC: "socionext,uniphier-ld20" - - Reference Board: "socionext,uniphier-ld20-ref" - - Global Board: "socionext,uniphier-ld20-global" - - - PXs3 SoC: "socionext,uniphier-pxs3" - - Reference Board: "socionext,uniphier-pxs3-ref" - -Example: - -/dts-v1/; - -/ { - compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; - - ... -}; diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml new file mode 100644 index 000000000000..65ad6d8a3c99 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier platform device tree bindings + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + $nodename: + const: / + compatible: + oneOf: + - description: LD4 SoC boards + items: + - enum: + - socionext,uniphier-ld4-ref + - const: socionext,uniphier-ld4 + - description: Pro4 SoC boards + items: + - enum: + - socionext,uniphier-pro4-ace + - socionext,uniphier-pro4-ref + - socionext,uniphier-pro4-sanji + - const: socionext,uniphier-pro4 + - description: sLD8 SoC boards + items: + - enum: + - socionext,uniphier-sld8-ref + - const: socionext,uniphier-sld8 + - description: PXs2 SoC boards + items: + - enum: + - socionext,uniphier-pxs2-gentil + - socionext,uniphier-pxs2-vodka + - const: socionext,uniphier-pxs2 + - description: LD6b SoC boards + items: + - enum: + - socionext,uniphier-ld6b-ref + - const: socionext,uniphier-ld6b + - description: LD11 SoC boards + items: + - enum: + - socionext,uniphier-ld11-global + - socionext,uniphier-ld11-ref + - const: socionext,uniphier-ld11 + - description: LD20 SoC boards + items: + - enum: + - socionext,uniphier-ld20-global + - socionext,uniphier-ld20-ref + - const: socionext,uniphier-ld20 + - description: PXs3 SoC boards + items: + - enum: + - socionext,uniphier-pxs3-ref + - const: socionext,uniphier-pxs3 diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index 0dedf94c8578..baff80197d5a 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -29,6 +29,8 @@ required: - reg - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 327ce6730823..abf2d97fb7ae 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -394,6 +394,12 @@ properties: - const: linksprite,pcduino3-nano - const: allwinner,sun7i-a20 + - description: Linutronix Testbox v2 + items: + - const: linutronix,testbox-v2 + - const: lamobo,lamobo-r1 + - const: allwinner,sun7i-a20 + - description: HAOYU Electronics Marsboard A10 items: - const: haoyu,a10-marsboard @@ -636,6 +642,21 @@ properties: - const: pine64,pinebook - const: allwinner,sun50i-a64 + - description: Pine64 PinePhone Developer Batch (1.0) + items: + - const: pine64,pinephone-1.0 + - const: allwinner,sun50i-a64 + + - description: Pine64 PinePhone Braveheart (1.1) + items: + - const: pine64,pinephone-1.1 + - const: allwinner,sun50i-a64 + + - description: Pine64 PineTab + items: + - const: pine64,pinetab + - const: allwinner,sun50i-a64 + - description: Pine64 SoPine Baseboard items: - const: pine64,sopine-baseboard @@ -647,6 +668,11 @@ properties: - const: pineriver,mini-xplus - const: allwinner,sun4i-a10 + - description: PocketBook Touch Lux 3 + items: + - const: pocketbook,touch-lux-3 + - const: allwinner,sun5i-a13 + - description: Point of View Protab2-IPS9 items: - const: pov,protab2-ips9 diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index 9370e64992dd..aa0738b4d534 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -30,6 +30,7 @@ properties: enum: - allwinner,sun5i-a13-mbus - allwinner,sun8i-h3-mbus + - allwinner,sun50i-a64-mbus reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt deleted file mode 100644 index cb12f33a247f..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ /dev/null @@ -1,300 +0,0 @@ -NVIDIA Tegra Power Management Controller (PMC) - -== Power Management Controller Node == - -The PMC block interacts with an external Power Management Unit. The PMC -mostly controls the entry and exit of the system from different sleep -modes. It provides power-gating controllers for SoC and CPU power-islands. - -Required properties: -- name : Should be pmc -- compatible : Should contain one of the following: - For Tegra20 must contain "nvidia,tegra20-pmc". - For Tegra30 must contain "nvidia,tegra30-pmc". - For Tegra114 must contain "nvidia,tegra114-pmc" - For Tegra124 must contain "nvidia,tegra124-pmc" - For Tegra132 must contain "nvidia,tegra124-pmc" - For Tegra210 must contain "nvidia,tegra210-pmc" -- reg : Offset and length of the register set for the device -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - "pclk" (The Tegra clock of that name), - "clk32k_in" (The 32KHz clock input to Tegra). - -Optional properties: -- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. - The PMU is an external Power Management Unit, whose interrupt output - signal is fed into the PMC. This signal is optionally inverted, and then - fed into the ARM GIC. The PMC is not involved in the detection or - handling of this interrupt signal, merely its inversion. -- nvidia,suspend-mode : The suspend mode that the platform should use. - Valid values are 0, 1 and 2: - 0 (LP0): CPU + Core voltage off and DRAM in self-refresh - 1 (LP1): CPU voltage off and DRAM in self-refresh - 2 (LP2): CPU voltage off -- nvidia,core-power-req-active-high : Boolean, core power request active-high -- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high -- nvidia,combined-power-req : Boolean, combined power request for CPU & Core -- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC) - is enabled. - -Required properties when nvidia,suspend-mode is specified: -- nvidia,cpu-pwr-good-time : CPU power good time in uS. -- nvidia,cpu-pwr-off-time : CPU power off time in uS. -- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time> - Core power good time in uS. -- nvidia,core-pwr-off-time : Core power off time in uS. - -Required properties when nvidia,suspend-mode=<0>: -- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector - The LP0 vector contains the warm boot code that is executed by AVP when - resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7 - processor and always being the first boot processor when chip is power on - or resume from deep sleep mode. When the system is resumed from the deep - sleep mode, the warm boot code will restore some PLLs, clocks and then - bring up CPU0 for resuming the system. - -Hardware-triggered thermal reset: -On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists, -hardware-triggered thermal reset will be enabled. - -Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are - described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the - Tegra K1 Technical Reference Manual. -- nvidia,bus-addr : Bus address of the PMU on the I2C bus -- nvidia,reg-addr : I2C register address to write poweroff command to -- nvidia,reg-data : Poweroff command to write to PMU - -Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command. - Defaults to 0. Valid values are described in section 12.5.2 - "Pinmux Support" of the Tegra4 Technical Reference Manual. - -Optional nodes: -- powergates : This node contains a hierarchy of power domain nodes, which - should match the powergates on the Tegra SoC. See "Powergate - Nodes" below. - -Example: - -/ SoC dts including file -pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - clocks = <&tegra_car 110>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <100>; - nvidia,core-pwr-good-time = <3845 3845>; - nvidia,core-pwr-off-time = <458>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - nvidia,lp0-vec = <0xbdffd000 0x2000>; -}; - -/ Tegra board dts file -{ - ... - pmc@7000f400 { - i2c-thermtrip { - nvidia,i2c-controller-id = <4>; - nvidia,bus-addr = <0x40>; - nvidia,reg-addr = <0x36>; - nvidia,reg-data = <0x2>; - }; - }; - ... - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - ... -}; - - -== Powergate Nodes == - -Each of the powergate nodes represents a power-domain on the Tegra SoC -that can be power-gated by the Tegra PMC. The name of the powergate node -should be one of the below. Note that not every powergate is applicable -to all Tegra devices and the following list shows which powergates are -applicable to which devices. Please refer to the Tegra TRM for more -details on the various powergates. - - Name Description Devices Applicable - 3d 3D Graphics Tegra20/114/124/210 - 3d0 3D Graphics 0 Tegra30 - 3d1 3D Graphics 1 Tegra30 - aud Audio Tegra210 - dfd Debug Tegra210 - dis Display A Tegra114/124/210 - disb Display B Tegra114/124/210 - heg 2D Graphics Tegra30/114/124/210 - iram Internal RAM Tegra124/210 - mpe MPEG Encode All - nvdec NVIDIA Video Decode Engine Tegra210 - nvjpg NVIDIA JPEG Engine Tegra210 - pcie PCIE Tegra20/30/124/210 - sata SATA Tegra30/124/210 - sor Display interfaces Tegra124/210 - ve2 Video Encode Engine 2 Tegra210 - venc Video Encode Engine All - vdec Video Decode Engine Tegra20/30/114/124 - vic Video Imaging Compositor Tegra124/210 - xusba USB Partition A Tegra114/124/210 - xusbb USB Partition B Tegra114/124/210 - xusbc USB Partition C Tegra114/124/210 - -Required properties: - - clocks: Must contain an entry for each clock required by the PMC for - controlling a power-gate. See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each reset required by the PMC for - controlling a power-gate. See ../reset/reset.txt for details. - - #power-domain-cells: Must be 0. - -Example: - - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - powergates { - pd_audio: aud { - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - resets = <&tegra_car 198>; - #power-domain-cells = <0>; - }; - }; - }; - - -== Powergate Clients == - -Hardware blocks belonging to a power domain should contain a "power-domains" -property that is a phandle pointing to the corresponding powergate node. - -Example: - - adma: adma@702e2000 { - ... - power-domains = <&pd_audio>; - ... - }; - -== Pad Control == - -On Tegra SoCs a pad is a set of pins which are configured as a group. -The pin grouping is a fixed attribute of the hardware. The PMC can be -used to set pad power state and signaling voltage. A pad can be either -in active or power down mode. The support for power state and signaling -voltage configuration varies depending on the pad in question. 3.3 V and -1.8 V signaling voltages are supported on pins where software -controllable signaling voltage switching is available. - -The pad configuration state nodes are placed under the pmc node and they -are referred to by the pinctrl client properties. For more information -see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. -The pad name should be used as the value of the pins property in pin -configuration nodes. - -The following pads are present on Tegra124 and Tegra132: -audio bb cam comp -csia csb cse dsi -dsib dsic dsid hdmi -hsic hv lvds mipi-bias -nand pex-bias pex-clk1 pex-clk2 -pex-cntrl sdmmc1 sdmmc3 sdmmc4 -sys_ddc uart usb0 usb1 -usb2 usb_bias - -The following pads are present on Tegra210: -audio audio-hv cam csia -csib csic csid csie -csif dbg debug-nonao dmic -dp dsi dsib dsic -dsid emmc emmc2 gpio -hdmi hsic lvds mipi-bias -pex-bias pex-clk1 pex-clk2 pex-cntrl -sdmmc1 sdmmc3 spi spi-hv -uart usb0 usb1 usb2 -usb3 usb-bias - -Required pin configuration properties: - - pins: Must contain name of the pad(s) to be configured. - -Optional pin configuration properties: - - low-power-enable: Configure the pad into power down mode - - low-power-disable: Configure the pad into active mode - - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 - or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. - The values are defined in - include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. - -Note: The power state can be configured on all of the Tegra124 and - Tegra132 pads. None of the Tegra124 or Tegra132 pads support - signaling voltage switching. - -Note: All of the listed Tegra210 pads except pex-cntrl support power - state configuration. Signaling voltage switching is supported on - following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio, - pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart. - -Pad configuration state example: - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - ... - - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - - sdmmc1_1v8: sdmmc1-1v8 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; - }; - - hdmi_off: hdmi-off { - pins = "hdmi"; - low-power-enable; - } - - hdmi_on: hdmi-on { - pins = "hdmi"; - low-power-disable; - } - }; - -Pinctrl client example: - sdmmc1: sdhci@700b0000 { - ... - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; - pinctrl-0 = <&sdmmc1_3v3>; - pinctrl-1 = <&sdmmc1_1v8>; - }; - ... - sor@54540000 { - ... - pinctrl-0 = <&hdmi_off>; - pinctrl-1 = <&hdmi_on>; - pinctrl-names = "hdmi-on", "hdmi-off"; - }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 000000000000..f17bb353f65e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,354 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + description: + Offset and length of the register set for the device. + + clock-names: + items: + - const: pclk + - const: clk32k_in + description: + Must includes entries pclk and clk32k_in. + pclk is the Tegra clock of that name and clk32k_in is 32KHz clock + input to Tegra. + + clocks: + maxItems: 2 + description: + Must contain an entry for each entry in clock-names. + See ../clocks/clocks-bindings.txt for details. + + '#clock-cells': + const: 1 + description: + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. + PMC also has blink control which allows 32Khz clock output to + Tegra blink pad. + Consumer of PMC clock should specify the desired clock by having + the clock ID in its "clocks" phandle cell with pmc clock provider. + See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC + clock IDs. + + '#interrupt-cells': + const: 2 + description: + Specifies number of cells needed to encode an interrupt source. + The value must be 2. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and + then fed into the ARM GIC. The PMC is not involved in the detection + or handling of this interrupt signal, merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Core power request active-high. + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: System clock request active-high. + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and Core. + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: + CPU power good signal from external PMIC to PMC is enabled. + + nvidia,suspend-mode: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + description: + The suspend mode that the platform should use. + Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh + Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh + Mode 2 is for LP2, CPU voltage off + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in uSec. + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in uSec. + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <Oscillator-stable-time Power-stable-time> + Core power good time in uSec. + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Core power off time in uSec. + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <start length> Starting address and length of LP0 vector. + The LP0 vector contains the warm boot code that is executed + by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and + always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed + from the deep sleep mode, the warm boot code will restore + some PLLs, clocks and then brings up CPU0 for resuming the + system. + + i2c-thermtrip: + type: object + description: + On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists, + hardware-triggered thermal reset will be enabled. + + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 + "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference + Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bus address of the PMU on the I2C bus. + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command. + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Poweroff command to write to PMU. + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pinmux used by the hardware when issuing Poweroff command. + Defaults to 0. Valid values are described in section 12.5.2 + "Pinmux Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + additionalProperties: false + + powergates: + type: object + description: | + This node contains a hierarchy of power domain nodes, which should + match the powergates on the Tegra SoC. Each powergate node + represents a power-domain on the Tegra SoC that can be power-gated + by the Tegra PMC. + Hardware blocks belonging to a power domain should contain + "power-domains" property that is a phandle pointing to corresponding + powergate node. + The name of the powergate node should be one of the below. Note that + not every powergate is applicable to all Tegra devices and the following + list shows which powergates are applicable to which devices. + Please refer to Tegra TRM for mode details on the powergate nodes to + use for each power-gate block inside Tegra. + Name Description Devices Applicable + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + + patternProperties: + clocks: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each clock required by the PMC + for controlling a power-gate. + See ../clocks/clock-bindings.txt document for more details. + + resets: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each reset required by the PMC + for controlling a power-gate. + See ../reset/reset.txt for more details. + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + additionalProperties: false + +patternProperties: + "^[a-f0-9]+-[a-f0-9]+$": + type: object + description: + This is a Pad configuration node. On Tegra SOCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power state + and signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages + are supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and they + are referred to by the pinctrl client properties. For more information + see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132 + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic, + hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias. + + The following pads are present on Tegra210 + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi, + hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias. + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + Power state can be configured on all Tegra124 and Tegra132 + pads. None of the Tegra124 or Tegra132 pads support signaling + voltage switching. + All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported + on below Tegra210 pads. + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, and uart. + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +dependencies: + "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] + "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + +examples: + - | + + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/soc/tegra-pmc.h> + + tegra_pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt deleted file mode 100644 index 39844cd0bcce..000000000000 --- a/Documentation/devicetree/bindings/arm/vexpress.txt +++ /dev/null @@ -1,229 +0,0 @@ -ARM Versatile Express boards family ------------------------------------ - -ARM's Versatile Express platform consists of a motherboard and one -or more daughterboards (tiles). The motherboard provides a set of -peripherals. Processor and RAM "live" on the tiles. - -The motherboard and each core tile should be described by a separate -Device Tree source file, with the tile's description including -the motherboard file using a /include/ directive. As the motherboard -can be initialized in one of two different configurations ("memory -maps"), care must be taken to include the correct one. - - -Root node ---------- - -Required properties in the root node: -- compatible value: - compatible = "arm,vexpress,<model>", "arm,vexpress"; - where <model> is the full tile model name (as used in the tile's - Technical Reference Manual), eg.: - - for Coretile Express A5x2 (V2P-CA5s): - compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; - - for Coretile Express A9x4 (V2P-CA9): - compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; - If a tile comes in several variants or can be used in more then one - configuration, the compatible value should be: - compatible = "arm,vexpress,<model>,<variant>", \ - "arm,vexpress,<model>", "arm,vexpress"; - eg: - - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1: - compatible = "arm,vexpress,v2p-ca15,tc1", \ - "arm,vexpress,v2p-ca15", "arm,vexpress"; - - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM: - compatible = "arm,vexpress,v2f-2xv6,ca7x3", \ - "arm,vexpress,v2f-2xv6", "arm,vexpress"; - -Optional properties in the root node: -- tile model name (use name from the tile's Technical Reference - Manual, eg. "V2P-CA5s") - model = "<model>"; -- tile's HBI number (unique ARM's board model ID, visible on the - PCB's silkscreen) in hexadecimal transcription: - arm,hbi = <0xhbi> - eg: - - for Coretile Express A5x2 (V2P-CA5s) HBI-0191: - arm,hbi = <0x191>; - - Coretile Express A9x4 (V2P-CA9) HBI-0225: - arm,hbi = <0x225>; - - -CPU nodes ---------- - -Top-level standard "cpus" node is required. It must contain a node -with device_type = "cpu" property for every available core, eg.: - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a5"; - reg = <0>; - }; - }; - - -Configuration infrastructure ----------------------------- - -The platform has an elaborated configuration system, consisting of -microcontrollers residing on the mother- and daughterboards known -as Motherboard/Daughterboard Configuration Controller (MCC and DCC). -The controllers are responsible for the platform initialization -(reset generation, flash programming, FPGA bitfiles loading etc.) -but also control clock generators, voltage regulators, gather -environmental data like temperature, power consumption etc. Even -the video output switch (FPGA) is controlled that way. - -The controllers are not mapped into normal memory address space -and must be accessed through bridges - other devices capable -of generating transactions on the configuration bus. - -The nodes describing configuration controllers must define -the following properties: -- compatible value: - compatible = "arm,vexpress,config-bus"; -- bridge phandle: - arm,vexpress,config-bridge = <phandle>; -and children describing available functions. - - -Platform topology ------------------ - -As Versatile Express can be configured in number of physically -different setups, the device tree should describe platform topology. -Root node and main motherboard node must define the following -property, describing physical location of the children nodes: -- site number: - arm,vexpress,site = <number>; - where 0 means motherboard, 1 or 2 are daugtherboard sites, - 0xf means "master" site (site containing main CPU tile) -- when daughterboards are stacked on one site, their position - in the stack be be described with: - arm,vexpress,position = <number>; -- when describing tiles consisting more than one DCC, its number - can be described with: - arm,vexpress,dcc = <number>; - -Any of the numbers above defaults to zero if not defined in -the node or any of its parent. - - -Motherboard ------------ - -The motherboard description file provides a single "motherboard" node -using 2 address cells corresponding to the Static Memory Bus used -between the motherboard and the tile. The first cell defines the Chip -Select (CS) line number, the second cell address offset within the CS. -All interrupt lines between the motherboard and the tile are active -high and are described using single cell. - -Optional properties of the "motherboard" node: -- motherboard's memory map variant: - arm,v2m-memory-map = "<name>"; - where name is one of: - - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also - referred to as "ARM Cortex-A Series memory map": - arm,v2m-memory-map = "rs1"; - When this property is missing, the motherboard is using the original - memory map (also known as the "Legacy memory map", primarily used - with the original CoreTile Express A9x4) with peripherals on CS7. - -Motherboard .dtsi files provide a set of labelled peripherals that -can be used to obtain required phandle in the tile's "aliases" node: -- UARTs, note that the numbers correspond to the physical connectors - on the motherboard's back panel: - v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3 -- I2C controllers: - v2m_i2c_dvi and v2m_i2c_pcie -- SP804 timers: - v2m_timer01 and v2m_timer23 - -The tile description should define a "smb" node, describing the -Static Memory Bus between the tile and motherboard. It must define -the following properties: -- "simple-bus" compatible value (to ensure creation of the children) - compatible = "simple-bus"; -- mapping of the SMB CS/offset addresses into main address space: - #address-cells = <2>; - #size-cells = <1>; - ranges = <...>; -- interrupts mapping: - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <...>; - - -Example of a VE tile description (simplified) ---------------------------------------------- - -/dts-v1/; - -/ { - model = "V2P-CA5s"; - arm,hbi = <0x225>; - arm,vexpress,site = <0xf>; - compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a5"; - reg = <0>; - }; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c000100 0x100>; - }; - - dcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - osc@0 { - compatible = "arm,vexpress-osc"; - }; - }; - - smb { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - /* CS0 is visible at 0x08000000 */ - ranges = <0 0 0x08000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - /* Active high IRQ 0 is connected to GIC's SPI0 */ - interrupt-map = <0 0 0 &gic 0 0 4>; - - /include/ "vexpress-v2m-rs1.dtsi" - }; -}; - diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml new file mode 100644 index 000000000000..7b69831060d8 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car Serial-ATA Interface + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,sata-r8a7779 # R-Car H1 + - items: + - enum: + - renesas,sata-r8a7790-es1 # R-Car H2 ES1 + - renesas,sata-r8a7790 # R-Car H2 other than ES1 + - renesas,sata-r8a7791 # R-Car M2-W + - renesas,sata-r8a7793 # R-Car M2-N + - const: renesas,rcar-gen2-sata # generic R-Car Gen2 + - items: + - enum: + - renesas,sata-r8a774b1 # RZ/G2N + - renesas,sata-r8a7795 # R-Car H3 + - renesas,sata-r8a77965 # R-Car M3-N + - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + sata@ee300000 { + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; + reg = <0xee300000 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 815>; + }; diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt deleted file mode 100644 index a2fbdc91570d..000000000000 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Renesas R-Car SATA - -Required properties: -- compatible : should contain one or more of the following: - - "renesas,sata-r8a774b1" for RZ/G2N - - "renesas,sata-r8a7779" for R-Car H1 - - "renesas,sata-r8a7790-es1" for R-Car H2 ES1 - - "renesas,sata-r8a7790" for R-Car H2 other than ES1 - - "renesas,sata-r8a7791" for R-Car M2-W - - "renesas,sata-r8a7793" for R-Car M2-N - - "renesas,sata-r8a7795" for R-Car H3 - - "renesas,sata-r8a77965" for R-Car M3-N - - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 - compatible device - - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 or - RZ/G2 compatible device - - "renesas,rcar-sata" is deprecated - - When compatible with the generic version nodes - must list the SoC-specific version corresponding - to the platform first followed by the generic - version. - -- reg : address and length of the SATA registers; -- interrupts : must consist of one interrupt specifier. -- clocks : must contain a reference to the functional clock. - -Example: - -sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; - interrupt-parent = <&gic>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp8_clks R8A7791_CLK_SATA0>; -}; diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml new file mode 100644 index 000000000000..c4c9119e4a20 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier System Bus + +description: | + The UniPhier System Bus is an external bus that connects on-board devices to + the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and + some control signals. It supports up to 8 banks (chip selects). + + Before any access to the bus, the bus controller must be configured; the bus + controller registers provide the control for the translation from the offset + within each bank to the CPU-viewed address. The needed setup includes the + base address, the size of each bank. Optionally, some timing parameters can + be optimized for faster bus access. + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + const: socionext,uniphier-system-bus + + reg: + maxItems: 1 + + "#address-cells": + description: | + The first cell is the bank number (chip select). + The second cell is the address offset within the bank. + const: 2 + + "#size-cells": + const: 1 + + ranges: + description: | + Provide address translation from the System Bus to the parent bus. + + Note: + The address region(s) that can be assigned for the System Bus is + implementation defined. Some SoCs can use 0x00000000-0x0fffffff and + 0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff. + There might be additional limitations depending on SoCs and the boot mode. + The address translation is arbitrary as long as the banks are assigned in + the supported address space with the required alignment and they do not + overlap one another. + + For example, it is possible to map: + bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff + It is also possible to map: + bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff + There is no reason to stick to a particular translation mapping, but the + "ranges" property should provide a "reasonable" default that is known to + work. The software should initialize the bus controller according to it. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +examples: + - | + // In this example, + // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and + // mapped to 0x43f00000 of the parent bus. + // - the UART device is connected at the offset 0x00200000 of CS5 and + // mapped to 0x46200000 of the parent bus. + + system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0x00000000 0x42000000 0x02000000>, + <5 0x00000000 0x46000000 0x01000000>; + + ethernet@1,01f00000 { + compatible = "smsc,lan9115"; + reg = <1 0x01f00000 0x1000>; + interrupts = <0 48 4>; + phy-mode = "mii"; + }; + + uart@5,00200000 { + compatible = "ns16550a"; + reg = <5 0x00200000 0x20>; + interrupts = <0 49 4>; + clock-frequency = <12288000>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index 233eb8294204..c984143d08d2 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -38,6 +38,7 @@ Required standard properties: "ti,sysc-dra7-mcasp" "ti,sysc-usb-host-fs" "ti,sysc-dra7-mcan" + "ti,sysc-pruss" - reg shall have register areas implemented for the interconnect target module in question such as revision, sysc and syss diff --git a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt b/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt deleted file mode 100644 index 68ef80afff16..000000000000 --- a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt +++ /dev/null @@ -1,66 +0,0 @@ -UniPhier System Bus - -The UniPhier System Bus is an external bus that connects on-board devices to -the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and -some control signals. It supports up to 8 banks (chip selects). - -Before any access to the bus, the bus controller must be configured; the bus -controller registers provide the control for the translation from the offset -within each bank to the CPU-viewed address. The needed setup includes the base -address, the size of each bank. Optionally, some timing parameters can be -optimized for faster bus access. - -Required properties: -- compatible: should be "socionext,uniphier-system-bus". -- reg: offset and length of the register set for the bus controller device. -- #address-cells: should be 2. The first cell is the bank number (chip select). - The second cell is the address offset within the bank. -- #size-cells: should be 1. -- ranges: should provide a proper address translation from the System Bus to - the parent bus. - -Note: -The address region(s) that can be assigned for the System Bus is implementation -defined. Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff, -while other SoCs can only use 0x40000000-0x4fffffff. There might be additional -limitations depending on SoCs and the boot mode. The address translation is -arbitrary as long as the banks are assigned in the supported address space with -the required alignment and they do not overlap one another. -For example, it is possible to map: - bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff -It is also possible to map: - bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff -There is no reason to stick to a particular translation mapping, but the -"ranges" property should provide a "reasonable" default that is known to work. -The software should initialize the bus controller according to it. - -Example: - - system-bus { - compatible = "socionext,uniphier-system-bus"; - reg = <0x58c00000 0x400>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <1 0x00000000 0x42000000 0x02000000 - 5 0x00000000 0x46000000 0x01000000>; - - ethernet@1,01f00000 { - compatible = "smsc,lan9115"; - reg = <1 0x01f00000 0x1000>; - interrupts = <0 48 4> - phy-mode = "mii"; - }; - - uart@5,00200000 { - compatible = "ns16550a"; - reg = <5 0x00200000 0x20>; - interrupts = <0 49 4> - clock-frequency = <12288000>; - }; - }; - -In this example, - - the Ethernet device is connected at the offset 0x01f00000 of CS1 and - mapped to 0x43f00000 of the parent bus. - - the UART device is connected at the offset 0x00200000 of CS5 and - mapped to 0x46200000 of the parent bus. diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml new file mode 100644 index 000000000000..6d7396ab8bee --- /dev/null +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/chrome/google,cros-ec-typec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Chrome OS EC(Embedded Controller) Type C port driver. + +maintainers: + - Benson Leung <bleung@chromium.org> + - Prashant Malani <pmalani@chromium.org> + +description: + Chrome OS devices have an Embedded Controller(EC) which has access to + Type C port state. This node is intended to allow the host to read and + control the Type C ports. The node for this device should be under a + cros-ec node like google,cros-ec-spi. + +properties: + compatible: + const: google,cros-ec-typec + + connector: + $ref: /schemas/connector/usb-connector.yaml# + +required: + - compatible + +examples: + - |+ + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + typec { + compatible = "google,cros-ec-typec"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml new file mode 100644 index 000000000000..de9a465096db --- /dev/null +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System Controller ICST Clocks + +maintainers: + - Linus Walleij <linusw@kernel.org> + +description: | + The ICS525 and ICS307 oscillators are produced by Integrated + Devices Technology (IDT). ARM integrated these oscillators deeply into their + reference designs by adding special control registers that manage such + oscillators to their system controllers. + + The various ARM system controllers contain logic to serialize and initialize + an ICST clock request after a write to the 32 bit register at an offset + into the system controller. Furthermore, to even be able to alter one of + these frequencies, the system controller must first be unlocked by + writing a special token to another offset in the system controller. + + Some ARM hardware contain special versions of the serial interface that only + connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to + different values and sometimes also hard-wires the output divider. They + therefore have special compatible strings as per this table (the OD value is + the value on the pins, not the resulting output divider). + + In the core modules and logic tiles, the ICST is a configurable clock fed + from a 24 MHz clock on the motherboard (usually the main crystal) used for + generating e.g. video clocks. It is located on the core module and there is + only one of these. This clock node must be a subnode of the core module. + + Hardware variant RDW OD VDW + + Integrator/AP 22 1 Bit 8 0, rest variable + integratorap-cm + + Integrator/AP 46 3 Bit 8 0, rest variable + integratorap-sys + + Integrator/AP 22 or 1 17 or (33 or 25 MHz) + integratorap-pci 14 1 14 + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-core + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-mem + + The ICST oscillator must be provided inside a system controller node. + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - arm,syscon-icst525 + - arm,syscon-icst307 + - arm,syscon-icst525-integratorap-cm + - arm,syscon-icst525-integratorap-sys + - arm,syscon-icst525-integratorap-pci + - arm,syscon-icst525-integratorcp-cm-core + - arm,syscon-icst525-integratorcp-cm-mem + - arm,integrator-cm-auxosc + - arm,versatile-cm-auxosc + - arm,impd-vco1 + - arm,impd-vco2 + + clocks: + description: Parent clock for the ICST VCO + maxItems: 1 + + clock-output-names: + maxItems: 1 + + lock-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the unlocking register for the oscillator + + vco-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the VCO register for the oscillator + +required: + - "#clock-cells" + - compatible + - clocks + +examples: + - | + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt deleted file mode 100644 index 11f5f95f571b..000000000000 --- a/Documentation/devicetree/bindings/clock/arm-integrator.txt +++ /dev/null @@ -1,34 +0,0 @@ -Clock bindings for ARM Integrator and Versatile Core Module clocks - -Auxiliary Oscillator Clock - -This is a configurable clock fed from a 24 MHz chrystal, -used for generating e.g. video clocks. It is located on the -core module and there is only one of these. - -This clock node *must* be a subnode of the core module, since -it obtains the base address for it's address range from its -parent node. - - -Required properties: -- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc" -- #clock-cells: must be <0> - -Optional properties: -- clocks: parent clock(s) - -Example: - -core-module@10000000 { - xtal24mhz: xtal24mhz@24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - auxosc: cm_aux_osc@25M { - #clock-cells = <0>; - compatible = "arm,integrator-cm-auxosc"; - clocks = <&xtal24mhz>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt deleted file mode 100644 index 4cd81742038f..000000000000 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ /dev/null @@ -1,70 +0,0 @@ -ARM System Controller ICST clocks - -The ICS525 and ICS307 oscillators are produced by Integrated Devices -Technology (IDT). ARM integrated these oscillators deeply into their -reference designs by adding special control registers that manage such -oscillators to their system controllers. - -The various ARM system controllers contain logic to serialize and initialize -an ICST clock request after a write to the 32 bit register at an offset -into the system controller. Furthermore, to even be able to alter one of -these frequencies, the system controller must first be unlocked by -writing a special token to another offset in the system controller. - -Some ARM hardware contain special versions of the serial interface that only -connects the low 8 bits of the VDW (missing one bit), hardwires RDW to -different values and sometimes also hardwire the output divider. They -therefore have special compatible strings as per this table (the OD value is -the value on the pins, not the resulting output divider): - -Hardware variant: RDW OD VDW - -Integrator/AP 22 1 Bit 8 0, rest variable -integratorap-cm - -Integrator/AP 46 3 Bit 8 0, rest variable -integratorap-sys - -Integrator/AP 22 or 1 17 or (33 or 25 MHz) -integratorap-pci 14 1 14 - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-core - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-mem - -The ICST oscillator must be provided inside a system controller node. - -Required properties: -- compatible: must be one of - "arm,syscon-icst525" - "arm,syscon-icst307" - "arm,syscon-icst525-integratorap-cm" - "arm,syscon-icst525-integratorap-sys" - "arm,syscon-icst525-integratorap-pci" - "arm,syscon-icst525-integratorcp-cm-core" - "arm,syscon-icst525-integratorcp-cm-mem" -- lock-offset: the offset address into the system controller where the - unlocking register is located -- vco-offset: the offset address into the system controller where the - ICST control register is located (even 32 bit address) -- #clock-cells: must be <0> -- clocks: parent clock, since the ICST needs a parent clock to derive its - frequency from, this attribute is compulsory. - -Example: - -syscon: syscon@10000000 { - compatible = "syscon"; - reg = <0x10000000 0x1000>; - - oscclk0: osc0@c { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x0c>; - clocks = <&xtal24mhz>; - }; - (...) -}; diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index b646bbcf7f92..8a55fdcf96ee 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -94,7 +94,7 @@ clock is connected to output 0 of the &ref. /* external oscillator */ osc: oscillator { compatible = "fixed-clock"; - #clock-cells = <1>; + #clock-cells = <0>; clock-frequency = <32678>; clock-output-names = "osc"; }; diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml index c8350030b374..a203d5d498db 100644 --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -21,6 +21,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + '#clock-cells': const: 0 @@ -41,6 +44,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + examples: # Display PIXEL Clock node: - | diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt deleted file mode 100644 index 8e4ab9e619a1..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Clock bindings for NXP i.MX8M Mini - -Required properties: -- compatible: Should be "fsl,imx8mm-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include the following entries: - - "osc_32k" - - "osc_24m" - - "clk_ext1" - - "clk_ext2" - - "clk_ext3" - - "clk_ext4" - -clk: clock-controller@30380000 { - compatible = "fsl,imx8mm-ccm"; - reg = <0x0 0x30380000 0x0 0x10000>; - #clock-cells = <1>; - clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, - <&clk_ext3>, <&clk_ext4>; - clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", - "clk_ext3", "clk_ext4"; -}; - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h -for the full list of i.MX8M Mini clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml new file mode 100644 index 000000000000..ec830db1367b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8mm-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Mini Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Mini clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: fsl,imx8mm-ccm + + reg: + maxItems: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h + for the full list of i.MX8M Mini clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml index cd0b8a341321..bdaa29616ab1 100644 --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml @@ -40,7 +40,7 @@ properties: '#clock-cells': const: 1 - description: | + description: The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h for the full list of i.MX8M Nano clock IDs. @@ -52,12 +52,14 @@ required: - clock-names - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | clk: clock-controller@30380000 { compatible = "fsl,imx8mn-ccm"; - reg = <0x0 0x30380000 0x0 0x10000>; + reg = <0x30380000 0x10000>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; @@ -65,48 +67,4 @@ examples: "clk_ext2", "clk_ext3", "clk_ext4"; }; - # Required external clocks for Clock Control Module node: - - | - osc_32k: clock-osc-32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "osc_32k"; - }; - - osc_24m: clock-osc-24m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc_24m"; - }; - - clk_ext1: clock-ext1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext1"; - }; - - clk_ext2: clock-ext2 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext2"; - }; - - clk_ext3: clock-ext3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext3"; - }; - - clk_ext4: clock-ext4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency= <133000000>; - clock-output-names = "clk_ext4"; - }; - ... diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml index 89aee63c9019..4351a1dbb4f7 100644 --- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml @@ -52,6 +52,8 @@ required: - clock-names - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt deleted file mode 100644 index 52de8263e012..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Clock bindings for NXP i.MX8M Quad - -Required properties: -- compatible: Should be "fsl,imx8mq-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include the following entries: - - "ckil" - - "osc_25m" - - "osc_27m" - - "clk_ext1" - - "clk_ext2" - - "clk_ext3" - - "clk_ext4" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h -for the full list of i.MX8M Quad clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml new file mode 100644 index 000000000000..05d7d1471e0c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8mq-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Quad Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Quad clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: fsl,imx8mq-ccm + + reg: + maxItems: 1 + + clocks: + items: + - description: 32k osc + - description: 25m osc + - description: 27m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: ckil + - const: osc_25m + - const: osc_27m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h + for the full list of i.MX8M Quad clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + clk: clock-controller@30380000 { + compatible = "fsl,imx8mq-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc_25m>, <&osc_27m>, + <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "ckil", "osc_25m", "osc_27m", + "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml new file mode 100644 index 000000000000..e2b6ac96bbcb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 and MMP3 Clock Controller + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The clock subsystem on MMP2 or MMP3 generates and supplies clock to various + controllers within the SoC. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. + +properties: + compatible: + enum: + - marvell,mmp2-clock # controller compatible with MMP2 SoC + - marvell,mmp3-clock # controller compatible with MMP3 SoC + + reg: + items: + - description: MPMU register region + - description: APMU register region + - description: APBC register region + + reg-names: + items: + - const: mpmu + - const: apmu + - const: apbc + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt deleted file mode 100644 index 23b52dc02266..000000000000 --- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Marvell MMP2 Clock Controller - -The MMP2 clock subsystem generates and supplies clock to various -controllers within the MMP2 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "marvell,mmp2-clock" - controller compatible with MMP2 SoC. - -- reg: physical base address of the clock subsystem and length of memory mapped - region. There are 3 places in SOC has clock control logic: - "mpmu", "apmu", "apbc". So three reg spaces need to be defined. - -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml index f0b804a7f096..0e8b07710451 100644 --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -35,6 +35,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + examples: # Clock controller node: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 3647007f82ca..eacccc88bbf6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -68,6 +68,8 @@ required: - nvmem-cell-names - '#thermal-sensor-cells' +additionalProperties: false + examples: - | clock-controller@900000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index 89c6e070e7ac..98572b4a9b60 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -40,6 +40,8 @@ required: - '#clock-cells' - '#reset-cells' +additionalProperties: false + examples: - | clock-controller@1800000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml index 18e4e77b8cfa..5a5b2214f0ca 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | clock-controller@300000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml index 1d3cae980471..a0bb713929b0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -66,6 +66,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml index 8cdece395eba..ce06f3f8c3e3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -40,6 +40,8 @@ required: - '#clock-cells' - '#reset-cells' +additionalProperties: false + examples: - | clock-controller@1800000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index ee4f968e2909..a345320e0e49 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -58,6 +58,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 888e9a708390..36f3b3668ced 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml new file mode 100644 index 000000000000..2c40a8aa9815 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8250 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8250. + + See also: + - dt-bindings/clock/qcom,gcc-sm8250.h + +properties: + compatible: + const: qcom,gcc-sm8250 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8250"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index d18f8ab9eeee..e533bb0cfd2b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -74,6 +74,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: # Example for GCC for MSM8960: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index 85518494ce43..f684fe67db84 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -74,6 +74,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + if: properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml index 7d853c1a85e5..d747bb58f0a7 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -50,6 +50,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-msm8998.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 944719bd586f..90a1349bc713 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -14,7 +14,9 @@ Required properties : "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" + "qcom,rpmcc-msm8976", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-ipq806x", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" "qcom,rpmcc-msm8998", "qcom,rpmcc" "qcom,rpmcc-qcs404", "qcom,rpmcc" diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 2cd158f13bab..a46a3a799a70 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -20,6 +20,7 @@ properties: - qcom,sc7180-rpmh-clk - qcom,sdm845-rpmh-clk - qcom,sm8150-rpmh-clk + - qcom,sm8250-rpmh-clk clocks: maxItems: 1 @@ -35,6 +36,8 @@ required: - compatible - '#clock-cells' +additionalProperties: false + examples: # Example for GCC for SDM845: The below node should be defined inside # &apps_rsc node. diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 0429062f1585..58cdfd5924d3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -58,6 +58,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sc7180.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml index 5785192cc4be..8635e35fd3f0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml @@ -52,6 +52,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sc7180.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml new file mode 100644 index 000000000000..0dd5d25ae7d7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Modem Clock Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm modem clock control module which supports the clocks on SC7180. + + See also: + - dt-bindings/clock/qcom,mss-sc7180.h + +properties: + compatible: + const: qcom,sc7180-mss + + clocks: + items: + - description: gcc_mss_mfab_axi clock from GCC + - description: gcc_mss_nav_axi clock from GCC + - description: gcc_mss_cfg_ahb clock from GCC + + clock-names: + items: + - const: gcc_mss_mfab_axis + - const: gcc_mss_nav_axi + - const: cfg_ahb + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + clock-controller@41a8000 { + compatible = "qcom,sc7180-mss"; + reg = <0 0x041a8000 0 0x8000>; + clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>; + clock-names = "gcc_mss_mfab_axis", + "gcc_mss_nav_axi", + "cfg_ahb"; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml index 31df901884ac..0071b9701960 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml @@ -48,6 +48,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index 89269ddfbdcd..ad47d747a3e4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -67,6 +67,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml index bac04f1c5d79..7a052ac5dc00 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml @@ -52,6 +52,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml index 9d216c0f11d4..2a6a81ab0318 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml @@ -48,6 +48,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt deleted file mode 100644 index f4d153f24a0f..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ /dev/null @@ -1,100 +0,0 @@ -* Renesas Clock Pulse Generator / Module Standby and Software Reset - -On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) -and MSSR (Module Standby and Software Reset) blocks are intimately connected, -and share the same register block. - -They provide the following functionalities: - - The CPG block generates various core clocks, - - The MSSR block provides two functions: - 1. Module Standby, providing a Clock Domain to control the clock supply - to individual SoC devices, - 2. Reset Control, to perform a software reset of individual SoC devices. - -Required Properties: - - compatible: Must be one of: - - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2) - - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) - - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N) - - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) - - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C) - - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M) - - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N) - - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E) - - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) - - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) - - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H) - - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N) - - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - - "renesas,r8a7796-cpg-mssr" for the r8a77960 SoC (R-Car M3-W) - - "renesas,r8a77961-cpg-mssr" for the r8a77961 SoC (R-Car M3-W+) - - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N) - - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H) - - "renesas,r8a77990-cpg-mssr" for the r8a77990 SoC (R-Car E3) - - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - - - reg: Base address and length of the memory resource used by the CPG/MSSR - block - - - clocks: References to external parent clocks, one entry for each entry in - clock-names - - clock-names: List of external parent clock names. Valid names are: - - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1, - r8a774b1, r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793, - r8a7794, r8a7795, r8a77960, r8a77961, r8a77965, r8a77970, - r8a77980, r8a77990, r8a77995) - - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a77960, r8a77961, r8a77965, - r8a77970, r8a77980) - - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791, - r8a7793, r8a7794) - - - #clock-cells: Must be 2 - - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" - and a core clock reference, as defined in - <dt-bindings/clock/*-cpg-mssr.h>. - - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the datasheet. - - - #power-domain-cells: Must be 0 - - SoC devices that are part of the CPG/MSSR Clock Domain and can be - power-managed through Module Standby should refer to the CPG device - node in their "power-domains" property, as documented by the generic PM - Domain bindings in - Documentation/devicetree/bindings/power/power-domain.yaml. - - - #reset-cells: Must be 1 - - The single reset specifier cell must be the module number, as defined - in the datasheet. - - -Examples --------- - - - CPG device node: - - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7795-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&extalr_clk>; - clock-names = "extal", "extalr"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - - - CPG/MSSR Clock Domain member device node: - - scif2: serial@e6e88000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; - reg = <0 0xe6e88000 0 64>; - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "fck"; - dmas = <&dmac1 0x13>, <&dmac1 0x12>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - resets = <&cpg 310>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml new file mode 100644 index 000000000000..9cd102e5fed5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Clock Pulse Generator / Module Standby and Software Reset + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) + and MSSR (Module Standby and Software Reset) blocks are intimately connected, + and share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The MSSR block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + enum: + - renesas,r7s9210-cpg-mssr # RZ/A2 + - renesas,r8a7743-cpg-mssr # RZ/G1M + - renesas,r8a7744-cpg-mssr # RZ/G1N + - renesas,r8a7745-cpg-mssr # RZ/G1E + - renesas,r8a77470-cpg-mssr # RZ/G1C + - renesas,r8a774a1-cpg-mssr # RZ/G2M + - renesas,r8a774b1-cpg-mssr # RZ/G2N + - renesas,r8a774c0-cpg-mssr # RZ/G2E + - renesas,r8a7790-cpg-mssr # R-Car H2 + - renesas,r8a7791-cpg-mssr # R-Car M2-W + - renesas,r8a7792-cpg-mssr # R-Car V2H + - renesas,r8a7793-cpg-mssr # R-Car M2-N + - renesas,r8a7794-cpg-mssr # R-Car E2 + - renesas,r8a7795-cpg-mssr # R-Car H3 + - renesas,r8a7796-cpg-mssr # R-Car M3-W + - renesas,r8a77961-cpg-mssr # R-Car M3-W+ + - renesas,r8a77965-cpg-mssr # R-Car M3-N + - renesas,r8a77970-cpg-mssr # R-Car V3M + - renesas,r8a77980-cpg-mssr # R-Car V3H + - renesas,r8a77990-cpg-mssr # R-Car E3 + - renesas,r8a77995-cpg-mssr # R-Car D3 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - extal # All + - extalr # Most R-Car Gen3 and RZ/G2 + - usb_extal # Most R-Car Gen2 and RZ/G1 + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/*-cpg-mssr.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the datasheet. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/MSSR Clock Domain and can be + power-managed through Module Standby should refer to the CPG device node + in their "power-domains" property, as documented by the generic PM Domain + bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the datasheet. + const: 1 + +if: + not: + properties: + compatible: + items: + enum: + - renesas,r7s9210-cpg-mssr +then: + required: + - '#reset-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0xe6150000 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt index 83f6c6a7c41c..4bf6f53bd95e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt @@ -38,10 +38,17 @@ Required properties: - reg: offset and length of the USB 2.0 clock selector register block. - clocks: A list of phandles and specifier pairs. - clock-names: Name of the clocks. - - The functional clock must be "ehci_ohci" + - The functional clock of USB 2.0 host side must be "ehci_ohci" + - The functional clock of HS-USB side must be "hs-usb-if" - The USB_EXTAL clock pin must be "usb_extal" - The USB_XTAL clock pin must be "usb_xtal" - #clock-cells: Must be 0 +- power-domains: A phandle and symbolic PM domain specifier. + See power/renesas,rcar-sysc.yaml. +- resets: A list of phandles and specifier pairs. +- reset-names: Name of the resets. + - The reset of USB 2.0 host side must be "ehci_ohci" + - The reset of HS-USB side must be "hs-usb-if" Example (R-Car H3): @@ -49,7 +56,11 @@ Example (R-Car H3): compatible = "renesas,r8a7795-rcar-usb2-clock-sel", "renesas,rcar-gen3-usb2-clock-sel"; reg = <0 0xe6590630 0 0x02>; - clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>; - clock-names = "ehci_ohci", "usb_extal", "usb_xtal"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal>, <&usb_xtal>; + clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; #clock-cells = <0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; }; diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml new file mode 100644 index 000000000000..c3930edc410f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier clock controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + oneOf: + - description: System clock + enum: + - socionext,uniphier-ld4-clock + - socionext,uniphier-pro4-clock + - socionext,uniphier-sld8-clock + - socionext,uniphier-pro5-clock + - socionext,uniphier-pxs2-clock + - socionext,uniphier-ld6b-clock + - socionext,uniphier-ld11-clock + - socionext,uniphier-ld20-clock + - socionext,uniphier-pxs3-clock + - description: Media I/O (MIO) clock, SD clock + enum: + - socionext,uniphier-ld4-mio-clock + - socionext,uniphier-pro4-mio-clock + - socionext,uniphier-sld8-mio-clock + - socionext,uniphier-pro5-sd-clock + - socionext,uniphier-pxs2-sd-clock + - socionext,uniphier-ld11-mio-clock + - socionext,uniphier-ld20-sd-clock + - socionext,uniphier-pxs3-sd-clock + - description: Peripheral clock + enum: + - socionext,uniphier-ld4-peri-clock + - socionext,uniphier-pro4-peri-clock + - socionext,uniphier-sld8-peri-clock + - socionext,uniphier-pro5-peri-clock + - socionext,uniphier-pxs2-peri-clock + - socionext,uniphier-ld11-peri-clock + - socionext,uniphier-ld20-peri-clock + - socionext,uniphier-pxs3-peri-clock + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + +examples: + - | + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + clock { + compatible = "socionext,uniphier-ld11-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + clock { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + clock { + compatible = "socionext,uniphier-ld11-peri-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt index e9d179e882d9..aaaf02ca2a6a 100644 --- a/Documentation/devicetree/bindings/clock/sprd.txt +++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt @@ -1,4 +1,4 @@ -Spreadtrum Clock Binding +Spreadtrum SC9860 Clock Binding ------------------------ Required properties: diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml new file mode 100644 index 000000000000..bb3a78d8105e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Unisoc Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: SC9863A Clock Control Unit Device Tree Bindings + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + "#clock-cells": + const: 1 + + compatible : + enum: + - sprd,sc9863a-ap-clk + - sprd,sc9863a-aon-clk + - sprd,sc9863a-apahb-gate + - sprd,sc9863a-pmu-gate + - sprd,sc9863a-aonapb-gate + - sprd,sc9863a-pll + - sprd,sc9863a-mpll + - sprd,sc9863a-rpll + - sprd,sc9863a-dpll + - sprd,sc9863a-mm-gate + - sprd,sc9863a-apapb-gate + + clocks: + minItems: 1 + maxItems: 4 + description: | + The input parent clock(s) phandle for this clock, only list fixed + clocks which are declared in devicetree. + + clock-names: + minItems: 1 + maxItems: 4 + items: + - const: ext-26m + - const: ext-32k + - const: ext-4m + - const: rco-100m + + reg: + maxItems: 1 + +required: + - compatible + - '#clock-cells' + +if: + properties: + compatible: + enum: + - sprd,sc9863a-ap-clk + - sprd,sc9863a-aon-clk +then: + required: + - reg + +else: + description: | + Other SC9863a clock nodes should be the child of a syscon node in + which compatible string shoule be: + "sprd,sc9863a-glbregs", "syscon", "simple-mfd" + + The 'reg' property for the clock node is also required if there is a sub + range of registers for the clocks. + +examples: + - | + ap_clk: clock-controller@21500000 { + compatible = "sprd,sc9863a-ap-clk"; + reg = <0 0x21500000 0 0x1000>; + clocks = <&ext_26m>, <&ext_32k>; + clock-names = "ext-26m", "ext-32k"; + #clock-cells = <1>; + }; + + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + ap_ahb_regs: syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0 0x20e00000 0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20e00000 0x4000>; + + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml new file mode 100644 index 000000000000..869b18ac88d7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI EHRPWM Time Base Clock + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +properties: + compatible: + items: + - const: ti,am654-ehrpwm-tbclk + - const: syscon + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +examples: + - | + ehrpwm_tbclk: syscon@4140 { + compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + reg = <0x4140 0x18>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt deleted file mode 100644 index 7b5f602765fe..000000000000 --- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt +++ /dev/null @@ -1,132 +0,0 @@ -UniPhier clock controller - - -System clock ------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-clock" - for LD4 SoC. - "socionext,uniphier-pro4-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-clock" - for LD11 SoC. - "socionext,uniphier-ld20-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - clock { - compatible = "socionext,uniphier-ld11-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 8: ST DMAC -12: GIO (Giga bit stream I/O) -14: USB3 ch0 host -15: USB3 ch1 host -16: USB3 ch0 PHY0 -17: USB3 ch0 PHY1 -20: USB3 ch1 PHY0 -21: USB3 ch1 PHY1 - - -Media I/O (MIO) clock, SD clock -------------------------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-mio-clock" - for LD4 SoC. - "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-mio-clock" - for LD11 SoC. - "socionext,uniphier-ld20-sd-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-sd-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - clock { - compatible = "socionext,uniphier-ld11-mio-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 0: SD ch0 host - 1: eMMC host - 2: SD ch1 host - 7: MIO DMAC - 8: USB2 ch0 host - 9: USB2 ch1 host -10: USB2 ch2 host -12: USB2 ch0 PHY -13: USB2 ch1 PHY -14: USB2 ch2 PHY - - -Peripheral clock ----------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-peri-clock" - for LD4 SoC. - "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-peri-clock" - for LD11 SoC. - "socionext,uniphier-ld20-peri-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", - "simple-mfd", "syscon"; - reg = <0x59820000 0x200>; - - clock { - compatible = "socionext,uniphier-ld11-peri-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 0: UART ch0 - 1: UART ch1 - 2: UART ch2 - 3: UART ch3 - 4: I2C ch0 - 5: I2C ch1 - 6: I2C ch2 - 7: I2C ch3 - 8: I2C ch4 - 9: I2C ch5 -10: I2C ch6 diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt index 22256e295a7a..3dd8961154ab 100644 --- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt +++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt @@ -19,7 +19,7 @@ Required nodes: 0: High Speed (HS), 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB. -[1]: bindings/connector/usb-connector.txt +[1]: bindings/connector/usb-connector.yaml Example ------- diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt deleted file mode 100644 index 88578ac1a8a7..000000000000 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ /dev/null @@ -1,135 +0,0 @@ -USB Connector -============= - -A USB connector node represents a physical USB connector. It should be -a child of a USB interface controller. - -Required properties: -- compatible: describes type of the connector, must be one of: - "usb-a-connector", - "usb-b-connector", - "usb-c-connector". - -Optional properties: -- label: symbolic name for the connector, -- type: size of the connector, should be specified in case of USB-A, USB-B - non-fullsize connectors: "mini", "micro". -- self-powered: Set this property if the usb device that has its own power - source. - -Optional properties for usb-b-connector: -- id-gpios: an input gpio for USB ID pin. -- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of - VBUS 5V. - see gpio/gpio.txt. -- vbus-supply: a phandle to the regulator for USB VBUS if needed when host - mode or dual role mode is supported. - Particularly, if use an output GPIO to control a VBUS regulator, should - model it as a regulator. - see regulator/fixed-regulator.yaml -- pinctrl-names : a pinctrl state named "default" is optional -- pinctrl-0 : pin control group - see pinctrl/pinctrl-bindings.txt - -Optional properties for usb-c-connector: -- power-role: should be one of "source", "sink" or "dual"(DRP) if typec - connector has power support. -- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK - or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC. -- data-role: should be one of "host", "device", "dual"(DRD) if typec - connector supports USB data. - -Required properties for usb-c-connector with power delivery support: -- source-pdos: An array of u32 with each entry providing supported power - source data object(PDO), the detailed bit definitions of PDO can be found - in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 - Source_Capabilities Message, the order of each entry(PDO) should follow - the PD spec chapter 6.4.1. Required for power source and power dual role. - User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() - defined in dt-bindings/usb/pd.h. -- sink-pdos: An array of u32 with each entry providing supported power - sink data object(PDO), the detailed bit definitions of PDO can be found - in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 - Sink Capabilities Message, the order of each entry(PDO) should follow - the PD spec chapter 6.4.1. Required for power sink and power dual role. - User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined - in dt-bindings/usb/pd.h. -- op-sink-microwatt: Sink required operating power in microwatt, if source - can't offer the power, Capability Mismatch is set. Required for power - sink and power dual role. - -Required nodes: -- any data bus to the connector should be modeled using the OF graph bindings - specified in bindings/graph.txt, unless the bus is between parent node and - the connector. Since single connector can have multiple data buses every bus - has assigned OF graph port number as follows: - 0: High Speed (HS), present in all connectors, - 1: Super Speed (SS), present in SS capable connectors, - 2: Sideband use (SBU), present in USB-C. - -Examples --------- - -1. Micro-USB connector with HS lines routed via controller (MUIC): - -muic-max77843@66 { - ... - usb_con: connector { - compatible = "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - }; -}; - -2. USB-C connector attached to CC controller (s2mm005), HS lines routed -to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. -DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. - -ccic: s2mm005@33 { - ... - usb_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - usb_con_hs: endpoint { - remote-endpoint = <&max77865_usbc_hs>; - }; - }; - port@1 { - reg = <1>; - usb_con_ss: endpoint { - remote-endpoint = <&usbdrd_phy_ss>; - }; - }; - port@2 { - reg = <2>; - usb_con_sbu: endpoint { - remote-endpoint = <&dp_aux>; - }; - }; - }; - }; -}; - -3. USB-C connector attached to a typec port controller(ptn5110), which has -power delivery support and enables drp. - -typec: ptn5110@50 { - ... - usb_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 12000, 2000)>; - op-sink-microwatt = <10000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml new file mode 100644 index 000000000000..4638d7adb806 --- /dev/null +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/connector/usb-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Connector + +maintainers: + - Rob Herring <robh@kernel.org> + +description: + A USB connector node represents a physical USB connector. It should be a child + of a USB interface controller. + +properties: + compatible: + enum: + - usb-a-connector + - usb-b-connector + - usb-c-connector + + label: + description: Symbolic name for the connector. + + type: + description: Size of the connector, should be specified in case of + non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible + connectors. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - mini + - micro + + self-powered: + description: Set this property if the USB device has its own power source. + type: boolean + + # The following are optional properties for "usb-b-connector". + id-gpios: + description: An input gpio for USB ID pin. + maxItems: 1 + + vbus-gpios: + description: An input gpio for USB VBus pin, used to detect presence of + VBUS 5V. + maxItems: 1 + + vbus-supply: + description: A phandle to the regulator for USB VBUS if needed when host + mode or dual role mode is supported. + Particularly, if use an output GPIO to control a VBUS regulator, should + model it as a regulator. See bindings/regulator/fixed-regulator.yaml + + # The following are optional properties for "usb-c-connector". + power-role: + description: Determines the power role that the Type C connector will + support. "dual" refers to Dual Role Port (DRP). + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - source + - sink + - dual + + try-power-role: + description: Preferred power role. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - source + - sink + - dual + + data-role: + description: Data role if Type C connector supports USB data. "dual" refers + Dual Role Device (DRD). + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - host + - device + - dual + + # The following are optional properties for "usb-c-connector" with power + # delivery support. + source-pdos: + description: An array of u32 with each entry providing supported power + source data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 + Source_Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power source and power dual role. + User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() + defined in dt-bindings/usb/pd.h. + minItems: 1 + maxItems: 7 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + sink-pdos: + description: An array of u32 with each entry providing supported power sink + data object(PDO), the detailed bit definitions of PDO can be found in + "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 + Sink Capabilities Message, the order of each entry(PDO) should follow the + PD spec chapter 6.4.1. Required for power sink and power dual role. User + can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined + in dt-bindings/usb/pd.h. + minItems: 1 + maxItems: 7 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + op-sink-microwatt: + description: Sink required operating power in microwatt, if source can't + offer the power, Capability Mismatch is set. Required for power sink and + power dual role. + + ports: + description: OF graph bindings (specified in bindings/graph.txt) that model + any data bus to the connector unless the bus is between parent node and + the connector. Since a single connector can have multiple data buses every + bus has an assigned OF graph port number as described below. + type: object + properties: + port@0: + type: object + description: High Speed (HS), present in all connectors. + + port@1: + type: object + description: Super Speed (SS), present in SS capable connectors. + + port@2: + type: object + description: Sideband Use (SBU), present in USB-C. This describes the + alternate mode connection of which SBU is a part. + + required: + - port@0 + +required: + - compatible + +examples: + # Micro-USB connector with HS lines routed via controller (MUIC). + - |+ + muic-max77843 { + usb_con1: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + # USB-C connector attached to CC controller (s2mm005), HS lines routed + # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. + # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. + - |+ + ccic: s2mm005 { + usb_con2: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&max77865_usbc_hs>; + }; + }; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&usbdrd_phy_ss>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + + # USB-C connector attached to a typec port controller(ptn5110), which has + # power delivery support and enables drp. + - |+ + #include <dt-bindings/usb/pd.h> + typec: ptn5110 { + usb_con3: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 12000, 2000)>; + op-sink-microwatt = <10000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 4e4d387e38a5..513499fcdb5b 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -11,7 +11,7 @@ Required properties: Example: -dcp@80028000 { +dcp: crypto@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53>; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt index e8a35c71e947..db690b10e582 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt @@ -8,7 +8,7 @@ Required properties: Example: -sah@10025000 { +sah: crypto@10025000 { compatible = "fsl,imx27-sahara"; reg = < 0x10025000 0x800>; interrupts = <75>; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 2fe245ca816a..8f359f473ada 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -138,7 +138,7 @@ iMX6QDL/SX requires four clocks iMX6UL does only require three clocks - crypto: caam@2140000 { + crypto: crypto@2140000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml new file mode 100644 index 000000000000..55dd6e3d270d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings + +maintainers: + - Kalyani Akula <kalyani.akula@xilinx.com> + - Michal Simek <michal.simek@xilinx.com> + +description: | + The ZynqMP AES-GCM hardened cryptographic accelerator is used to + encrypt or decrypt the data with provided key and initialization vector. + +properties: + compatible: + const: xlnx,zynqmp-aes + +required: + - compatible + +additionalProperties: false + +examples: + - | + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + xlnx_aes: zynqmp-aes { + compatible = "xlnx,zynqmp-aes"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 5ff9cf26ca38..e5344c4ae226 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -36,6 +36,12 @@ properties: - items: - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon + + - items: + - enum: - allwinner,sun50i-a64-tcon-lcd - const: allwinner,sun8i-a83t-tcon-lcd diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index d1205a6697a0..a8d202c9d004 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -71,9 +71,9 @@ properties: maxItems: 2 reg-names: - items: - - const: vpu - - const: hhi + items: + - const: vpu + - const: hhi interrupts: maxItems: 1 @@ -107,6 +107,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | vpu: vpu@d0100000 { diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 2c887536258c..e8ddec5d9d91 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -1,10 +1,10 @@ -Analog Device ADV7511(W)/13/33 HDMI Encoders +Analog Device ADV7511(W)/13/33/35 HDMI Encoders ----------------------------------------- -The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters -compatible with HDMI 1.4 and DVI 1.0. They support color space conversion, -S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while -the others support RGB interface. +The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video +transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space +conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input +pixels, while the others support RGB interface. Required properties: @@ -13,6 +13,7 @@ Required properties: "adi,adv7511w" "adi,adv7513" "adi,adv7533" + "adi,adv7535" - reg: I2C slave addresses The ADV7511 internal registers are split into four pages exposed through @@ -52,14 +53,14 @@ The following input format properties are required except in "rgb 1x" and - bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is needed only for ADV7511. -The following properties are required for ADV7533: +The following properties are required for ADV7533 and ADV7535: - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should be one of 1, 2, 3 or 4. - a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. - v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. - v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be - either 1.2V or 1.8V. + either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535. Optional properties: @@ -71,9 +72,9 @@ Optional properties: - adi,embedded-sync: The input uses synchronization signals embedded in the data stream (similar to BT.656). Defaults to separate H/V synchronization signals. -- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing - generator. The chip will rely on the sync signals in the DSI data lanes, - rather than generate its own timings for HDMI output. +- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the + internal timing generator. The chip will rely on the sync signals in the + DSI data lanes, rather than generate its own timings for HDMI output. - clocks: from common clock binding: reference to the CEC clock. - clock-names: from common clock binding: must be "cec". - reg-names : Names of maps with programmable addresses. @@ -85,7 +86,7 @@ Required nodes: The ADV7511 has two video ports. Their connections are modelled using the OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. -- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the +- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the remote endpoint phandle should be a reference to a valid mipi_dsi_host device node. - Video port 1 for the HDMI output diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml new file mode 100644 index 000000000000..5dff93641bea --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI DSI to eDP Video Format Converter Device Tree Bindings + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + The PS8640 is a low power MIPI-to-eDP video format converter supporting + mobile devices with embedded panel resolutions up to 2048 x 1536. The + device accepts a single channel of MIPI DSI v1.1, with up to four lanes + plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The + device outputs eDP v1.4, one or two lanes, at a link rate of up to + 3.24Gbit/sec per lane. + +properties: + compatible: + const: parade,ps8640 + + reg: + maxItems: 1 + description: Base I2C address of the device. + + powerdown-gpios: + maxItems: 1 + description: GPIO connected to active low powerdown. + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset. + + vdd12-supply: + maxItems: 1 + description: Regulator for 1.2V digital core power. + + vdd33-supply: + maxItems: 1 + description: Regulator for 3.3V digital core power. + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: | + Video port for DSI input + + port@1: + type: object + description: | + Video port for eDP output (panel or connector). + + required: + - port@0 + +required: + - compatible + - reg + - powerdown-gpios + - reset-gpios + - vdd12-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + ps8640: edp-bridge@18 { + compatible = "parade,ps8640"; + reg = <0x18>; + powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml new file mode 100644 index 000000000000..c036a75db8f7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@ti.com> + +description: | + The TC358768/TC358778 is bridge device which converts RGB to DSI. + +properties: + compatible: + enum: + - toshiba,tc358768 + - toshiba,tc358778 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low RESX pin + + vddc-supply: + description: Regulator for 1.2V internal core power. + + vddmipi-supply: + description: Regulator for 1.2V for the MIPI. + + vddio-supply: + description: Regulator for 1.8V - 3.3V IO power. + + clocks: + maxItems: 1 + + clock-names: + const: refclk + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: | + Video port for RGB input + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lines: + enum: [ 16, 18, 24 ] + + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: | + Video port for DSI output (panel or connector). + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - vddc-supply + - vddmipi-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + dsi_bridge: dsi-bridge@e { + compatible = "toshiba,tc358768"; + reg = <0xe>; + + clocks = <&tc358768_refclk>; + clock-names = "refclk"; + + reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>; + + vddc-supply = <&v1_2d>; + vddmipi-supply = <&v1_2d>; + vddio-supply = <&v3_3d>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + rgb_in: endpoint { + remote-endpoint = <&dpi_out>; + data-lines = <24>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt deleted file mode 100644 index 8def11b16a24..000000000000 --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +++ /dev/null @@ -1,36 +0,0 @@ -Vivante GPU core devices -======================== - -Required properties: -- compatible: Should be "vivante,gc" - A more specific compatible is not needed, as the cores contain chip - identification registers at fixed locations, which provide all the - necessary information to the driver. -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain the cores interrupt line -- clocks: should contain one clock for entry in clock-names - see Documentation/devicetree/bindings/clock/clock-bindings.txt -- clock-names: - - "bus": AXI/master interface clock - - "reg": AHB/slave interface clock - (only required if GPU can gate slave interface independently) - - "core": GPU core clock - - "shader": Shader clock (only required if GPU has feature PIPE_3D) - -Optional properties: -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt - -example: - -gpu_3d: gpu@130000 { - compatible = "vivante,gc"; - reg = <0x00130000 0x4000>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, - <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>; - clock-names = "bus", "core", "shader"; - power-domains = <&gpc 1>; -}; diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml new file mode 100644 index 000000000000..66e93e563653 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9486 display panels device tree bindings + +maintainers: + - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> + +description: + This binding is for display panels using an Ilitek ILI9486 controller in SPI + mode. + +allOf: + - $ref: panel/panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Waveshare 3.5" 320x480 Color TFT LCD + - waveshare,rpi-lcd-35 + # Ozzmaker 3.5" 320x480 Color TFT LCD + - ozzmaker,piscreen + - const: ilitek,ili9486 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + + display@0{ + compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt index b6a7e7397b8b..58914cf681b8 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt @@ -7,6 +7,7 @@ output bus. Required properties: - compatible: "mediatek,<chip>-dpi" + the supported chips are mt2701 , mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt deleted file mode 100644 index bf9c7a2a495c..000000000000 --- a/Documentation/devicetree/bindings/display/msm/gmu.txt +++ /dev/null @@ -1,116 +0,0 @@ -Qualcomm adreno/snapdragon GMU (Graphics management unit) - -The GMU is a programmable power controller for the GPU. the CPU controls the -GMU which in turn handles power controls for the GPU. - -Required properties: -- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu" - for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" - Note that you need to list the less specific "qcom,adreno-gmu" - for generic matches and the more specific identifier to identify - the specific device. -- reg: Physical base address and length of the GMU registers. -- reg-names: Matching names for the register regions - * "gmu" - * "gmu_pdc" - * "gmu_pdc_seg" -- interrupts: The interrupt signals from the GMU. -- interrupt-names: Matching names for the interrupts - * "hfi" - * "gmu" -- clocks: phandles to the device clocks -- clock-names: Matching names for the clocks - * "gmu" - * "cxo" - * "axi" - * "mnoc" -- power-domains: should be: - <&clock_gpucc GPU_CX_GDSC> - <&clock_gpucc GPU_GX_GDSC> -- power-domain-names: Matching names for the power domains -- iommus: phandle to the adreno iommu -- operating-points-v2: phandle to the OPP operating points - -Optional properties: -- sram: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon - SoCs. See Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Example: - -/ { - ... - - gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - - reg = <0x506a000 0x30000>, - <0xb280000 0x10000>, - <0xb480000 0x10000>; - reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; - - interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hfi", "gmu"; - - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>; - clock-names = "gmu", "cxo", "axi", "memnoc"; - - power-domains = <&gpucc GPU_CX_GDSC>, - <&gpucc GPU_GX_GDSC>; - power-domain-names = "cx", "gx"; - - iommus = <&adreno_smmu 5>; - - operating-points-v2 = <&gmu_opp_table>; - }; -}; - -a3xx example with OCMEM support: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - }; - - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml new file mode 100644 index 000000000000..0b8736a9384e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright 2019-2020, The Linux Foundation, All Rights Reserved +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the GMU attached to certain Adreno GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +description: | + These bindings describe the Graphics Management Unit (GMU) that is attached + to members of the Adreno A6xx GPU family. The GMU provides on-device power + management and support to improve power efficiency and reduce the load on + the CPU. + +properties: + compatible: + items: + - enum: + - qcom,adreno-gmu-630.2 + - const: qcom,adreno-gmu + + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + interrupts: + items: + - description: GMU HFI interrupt + - description: GMU interrupt + + + interrupt-names: + items: + - const: hfi + - const: gmu + + power-domains: + items: + - description: CX power domain + - description: GX power domain + + power-domain-names: + items: + - const: cx + - const: gx + + iommus: + maxItems: 1 + + operating-points-v2: true + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - power-domains + - power-domain-names + - iommus + - operating-points-v2 + +examples: + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 7edc298a15f2..fd779cd6994d 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -35,25 +35,54 @@ Required properties: bring the GPU out of secure mode. - firmware-name: optional property of the 'zap-shader' node, listing the relative path of the device specific zap firmware. +- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. -Example 3xx/4xx/a5xx: +Example 3xx/4xx: / { ... - gpu: qcom,kgsl-3d0@4300000 { - compatible = "qcom,adreno-320.2", "qcom,adreno"; - reg = <0x04300000 0x20000>; + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 80 0>; - clock-names = - "core", - "iface", - "mem_iface"; - clocks = - <&mmcc GFX3D_CLK>, - <&mmcc GFX3D_AHB_CLK>, - <&mmcc MMSS_IMEM_AHB_CLK>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + }; + + gpu_sram: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", + "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", + "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + ranges = <0 0 0xfec00000 0x100000>; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml new file mode 100644 index 000000000000..93878c2cd370 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: advantech,idk-1110wr + - {} # panel-lvds, but not listed here to avoid false select + + data-mapping: + const: jeida-24 + + width-mm: + const: 223 + + height-mm: + const: 125 + + panel-timing: true + port: true + +additionalProperties: false + +required: + - compatible + +examples: + - |+ + panel { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vsync-len = <10>; + vfront-porch = <15>; + vback-porch = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml new file mode 100644 index 000000000000..6b7fddc80c41 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel. + A dual-LVDS interface is a dual-link connection with even pixels traveling + on one link, and with odd pixels traveling on the other link. + + The panel expects odd pixels on the first port, and even pixels on the + second port, therefore the ports must be marked accordingly (with either + dual-lvds-odd-pixels or dual-lvds-even-pixels). + +properties: + compatible: + items: + - const: advantech,idk-2121wr + - {} # panel-lvds, but not listed here to avoid false select + + width-mm: + const: 476 + + height-mm: + const: 268 + + data-mapping: + const: vesa-24 + + panel-timing: true + + ports: + type: object + properties: + port@0: + type: object + description: The sink for odd pixels. + properties: + reg: + const: 0 + + dual-lvds-odd-pixels: true + + required: + - reg + - dual-lvds-odd-pixels + + port@1: + type: object + description: The sink for even pixels. + properties: + reg: + const: 1 + + dual-lvds-even-pixels: true + + required: + - reg + - dual-lvds-even-pixels + +additionalProperties: false + +required: + - compatible + - width-mm + - height-mm + - data-mapping + - panel-timing + - ports + +examples: + - |+ + panel-lvds { + compatible = "advantech,idk-2121wr", "panel-lvds"; + + width-mm = <476>; + height-mm = <268>; + + data-mapping = "vesa-24"; + + panel-timing { + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <44>; + hfront-porch = <88>; + hback-porch = <148>; + vfront-porch = <4>; + vback-porch = <36>; + vsync-len = <5>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + panel_in0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + panel_in1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt b/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt deleted file mode 100644 index bae0e2b51467..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 8.0" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101ean01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt b/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt deleted file mode 100644 index 72e088a4fb3a..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 10.1" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101aw03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt b/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt deleted file mode 100644 index 3590b0741619..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 10.1" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101ean01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt deleted file mode 100644 index 889d511d66c9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "auo,b101xtn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt b/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt deleted file mode 100644 index 690d0a568ef3..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel - -Required properties: -- compatible: should be "auo,b116xw03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt deleted file mode 100644 index 302226b5bb55..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel - -Required properties: -- compatible: should be "auo,b133htn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt b/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt deleted file mode 100644 index 7443b7c76769..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel - -Required properties: -- compatible: should be "auo,b133xtn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt deleted file mode 100644 index 49e4105378f6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt +++ /dev/null @@ -1,29 +0,0 @@ -AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel - -Required properties: -- compatible: should be "auo,g070vvn01" -- backlight: phandle of the backlight device attached to the panel -- power-supply: single regulator to provide the supply voltage - -Required nodes: -- port: Parallel port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX6Q based board - - lcd_panel: lcd-panel { - compatible = "auo,g070vvn01"; - backlight = <&backlight_lcd>; - power-supply = <®_display>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt deleted file mode 100644 index bc6a0c858e23..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt +++ /dev/null @@ -1,12 +0,0 @@ -AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel - -Required properties: -- compatible: should be "auo,g101evn010" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt deleted file mode 100644 index 85626edf63e5..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt +++ /dev/null @@ -1,12 +0,0 @@ -AU Optronics Corporation 10.4" (800x600) color TFT LCD panel - -Required properties: -- compatible: should be "auo,g104sn02" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt b/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt deleted file mode 100644 index 3afc76747824..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g133han01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - -Required properties: -- compatible: should be "auo,g133han01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt b/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt deleted file mode 100644 index ed657c2141d4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,g185han01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - -Required properties: -- compatible: should be "auo,g185han01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt deleted file mode 100644 index 59bb6cd8aa75..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt +++ /dev/null @@ -1,8 +0,0 @@ -AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel - -Required properties: -- compatible: should be "auo,p320hvn03" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt deleted file mode 100644 index cbd9da3f03b1..000000000000 --- a/Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt +++ /dev/null @@ -1,7 +0,0 @@ -AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel - -Required properties: -- compatible: should be "auo,t215hvn01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt b/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt deleted file mode 100644 index b6f2f3e8f44e..000000000000 --- a/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt +++ /dev/null @@ -1,7 +0,0 @@ -Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - -Required properties: -- compatible: should be "avic,tm070ddh03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt deleted file mode 100644 index 55183d360032..000000000000 --- a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt +++ /dev/null @@ -1,28 +0,0 @@ -BOE HV070WSA-100 7.01" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "boe,hv070wsa-100" -- power-supply: regulator to provide the VCC supply voltage (3.3 volts) -- enable-gpios: GPIO pin to enable and disable panel (active high) - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [1]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - panel: panel { - compatible = "boe,hv070wsa-100"; - power-supply = <&vcc_3v3_reg>; - enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; - port { - panel_ep: endpoint { - remote-endpoint = <&bridge_out_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt deleted file mode 100644 index b258d6a91ec6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt +++ /dev/null @@ -1,7 +0,0 @@ -BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "boe,nv101wxmn51" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt deleted file mode 100644 index 50be5e2438b2..000000000000 --- a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt +++ /dev/null @@ -1,7 +0,0 @@ -Boe Corporation 8.0" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "boe,tv080wum-nl0" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml new file mode 100644 index 000000000000..740213459134 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TV101WUM-NL6 DSI Display Panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel + - boe,tv101wum-nl6 + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel + - auo,kd101n80-45na + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel + - boe,tv101wum-n53 + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel + - auo,b101uan08.3 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt deleted file mode 100644 index 057f7f3f6dbe..000000000000 --- a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt +++ /dev/null @@ -1,12 +0,0 @@ -CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel - -Required properties: -- compatible: should be "cdtech,s043wq26h-ct7" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt deleted file mode 100644 index 505615dfa0df..000000000000 --- a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt +++ /dev/null @@ -1,12 +0,0 @@ -CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel - -Required properties: -- compatible: should be "cdtech,s070wv95-ct16" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt deleted file mode 100644 index dd22685d2adc..000000000000 --- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt +++ /dev/null @@ -1,7 +0,0 @@ -Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - -Required properties: -- compatible: should be "chunghwa,claa070wp03xg" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt deleted file mode 100644 index f24614e4d5ec..000000000000 --- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt +++ /dev/null @@ -1,7 +0,0 @@ -Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "chunghwa,claa101wa01a" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt b/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt deleted file mode 100644 index 0ab2c05a4c22..000000000000 --- a/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt +++ /dev/null @@ -1,7 +0,0 @@ -Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - -Required properties: -- compatible: should be "chunghwa,claa101wb03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt deleted file mode 100644 index 897085ee3cd4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt +++ /dev/null @@ -1,8 +0,0 @@ -DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. - -Required properties: -- compatible: should be "dataimage,scf0700c48ggu18" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt index 78222ced1874..7f55ad4a40c4 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt @@ -1,123 +1 @@ -display-timing bindings -======================= - -display-timings node --------------------- - -required properties: - - none - -optional properties: - - native-mode: The native mode for the display, in case multiple modes are - provided. When omitted, assume the first node is the native. - -timing subnode --------------- - -required properties: - - hactive, vactive: display resolution - - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters - in pixels - vfront-porch, vback-porch, vsync-len: vertical display timing parameters in - lines - - clock-frequency: display clock in Hz - -optional properties: - - hsync-active: hsync pulse is active low/high/ignored - - vsync-active: vsync pulse is active low/high/ignored - - de-active: data-enable pulse is active low/high/ignored - - pixelclk-active: with - - active high = drive pixel data on rising edge/ - sample data on falling edge - - active low = drive pixel data on falling edge/ - sample data on rising edge - - ignored = ignored - - syncclk-active: with - - active high = drive sync on rising edge/ - sample sync on falling edge of pixel - clock - - active low = drive sync on falling edge/ - sample sync on rising edge of pixel - clock - - omitted = same configuration as pixelclk-active - - interlaced (bool): boolean to enable interlaced mode - - doublescan (bool): boolean to enable doublescan mode - - doubleclk (bool): boolean to enable doubleclock mode - -All the optional properties that are not bool follow the following logic: - <1>: high active - <0>: low active - omitted: not used on hardware - -There are different ways of describing the capabilities of a display. The -devicetree representation corresponds to the one commonly found in datasheets -for displays. If a display supports multiple signal timings, the native-mode -can be specified. - -The parameters are defined as: - - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vback_porch | | | - | | v | | | - +----------#######################################----------+-------+ - | # ^ # | | - | # | # | | - | hback # | # hfront | hsync | - | porch # | hactive # porch | len | - |<-------->#<-------+--------------------------->#<-------->|<----->| - | # | # | | - | # |vactive # | | - | # | # | | - | # v # | | - +----------#######################################----------+-------+ - | | ^ | | | - | | |vfront_porch | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vsync_len | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - -Note: In addition to being used as subnode(s) of display-timings, the timing - subnode may also be used on its own. This is appropriate if only one mode - need be conveyed. In this case, the node should be named 'panel-timing'. - - -Example: - - display-timings { - native-mode = <&timing0>; - timing0: 1080p24 { - /* 1920x1080p24 */ - clock-frequency = <52000000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <25>; - hback-porch = <25>; - hsync-len = <25>; - vback-porch = <2>; - vfront-porch = <2>; - vsync-len = <2>; - hsync-active = <1>; - }; - }; - -Every required property also supports the use of ranges, so the commonly used -datasheet description with minimum, typical and maximum values can be used. - -Example: - - timing1: timing { - /* 1920x1080p24 */ - clock-frequency = <148500000>; - hactive = <1920>; - vactive = <1080>; - hsync-len = <0 44 60>; - hfront-porch = <80 88 95>; - hback-porch = <100 148 160>; - vfront-porch = <0 4 6>; - vback-porch = <0 36 50>; - vsync-len = <0 5 6>; - }; +See display-timings.yaml in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml new file mode 100644 index 000000000000..c8c0c9cb0492 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/display-timings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: display timing bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + A display panel may be able to handle several display timings, + with different resolutions. + The display-timings node makes it possible to specify the timing + and to specify the timing that is native for the display. + +properties: + $nodename: + const: display-timings + + native-mode: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + The default display timing is the one specified as native-mode. + If no native-mode is specified then the first node is assumed the + native mode. + +patternProperties: + "^timing": + type: object + allOf: + - $ref: panel-timing.yaml# + +additionalProperties: false + +examples: + - |+ + + /* + * Example that specifies panel timing using minimum, typical, + * maximum values as commonly used in datasheet description. + * timing1 is the native-mode. + */ + display-timings { + native-mode = <&timing1>; + timing0 { + /* 1920x1080p24 */ + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <0 44 60>; + hfront-porch = <80 88 95>; + hback-porch = <100 148 160>; + vfront-porch = <0 4 6>; + vback-porch = <0 36 50>; + vsync-len = <0 5 6>; + }; + timing1 { + /* 1920x1080p24 */ + clock-frequency = <52000000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <25>; + hback-porch = <25>; + hsync-len = <0 25 25>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <2>; + hsync-active = <1>; + pixelclk-active = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt deleted file mode 100644 index fbf5dcd15661..000000000000 --- a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt +++ /dev/null @@ -1,12 +0,0 @@ -DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel - -Required properties: -- compatible: should be "dlc,dlc1010gig" -- power-supply: See simple-panel.txt - -Optional properties: -- enable-gpios: See simple-panel.txt -- backlight: See simple-panel.txt - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt deleted file mode 100644 index b7ac1c725f97..000000000000 --- a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt +++ /dev/null @@ -1,55 +0,0 @@ -Emerging Display Technology Corp. Displays -========================================== - - -Display bindings for EDT Display Technology Corp. Displays which are -compatible with the simple-panel binding, which is specified in -simple-panel.txt - -3,5" QVGA TFT Panels --------------------- -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ET035012DM6 | edt,et035012dm6 | 3.5" QVGA TFT LCD panel | -+-----------------+---------------------+-------------------------------------+ - -4,3" WVGA TFT Panels --------------------- - -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ETM0430G0DH6 | edt,etm0430g0dh6 | 480x272 TFT Display | -+-----------------+---------------------+-------------------------------------+ - -5,7" WVGA TFT Panels --------------------- - -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ET057090DHU | edt,et057090dhu | 5.7" VGA TFT LCD panel | -+-----------------+---------------------+-------------------------------------+ - - -7,0" WVGA TFT Panels --------------------- - -+-----------------+---------------------+-------------------------------------+ -| Identifier | compatbile | description | -+=================+=====================+=====================================+ -| ETM0700G0DH6 | edt,etm070080dh6 | WVGA TFT Display with capacitive | -| | edt,etm0700g0dh6 | Touchscreen | -+-----------------+---------------------+-------------------------------------+ -| ETM0700G0BDH6 | edt,etm070080bdh6 | Same as ETM0700G0DH6 but with | -| | | inverted pixel clock. | -+-----------------+---------------------+-------------------------------------+ -| ETM0700G0EDH6 | edt,etm070080edh6 | Same display as the ETM0700G0BDH6, | -| | | but with changed Hardware for the | -| | | backlight and the touch interface | -+-----------------+---------------------+-------------------------------------+ -| ET070080DH6 | edt,etm070080dh6 | Same timings as the ETM0700G0DH6, | -| | | but with resistive touch. | -+-----------------+---------------------+-------------------------------------+ - diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml new file mode 100644 index 000000000000..aa761f697b7a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elida KD35T133 3.5in 320x480 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: elida,kd35t133 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vdd-supply: + description: regulator that supplies the vdd voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "elida,kd35t133"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vdd-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt b/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt deleted file mode 100644 index 82d22e191ac3..000000000000 --- a/Documentation/devicetree/bindings/display/panel/evervision,vgg804821.txt +++ /dev/null @@ -1,12 +0,0 @@ -Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - -Required properties: -- compatible: should be "evervision,vgg804821" -- power-supply: See simple-panel.txt - -Optional properties: -- backlight: See simple-panel.txt -- enable-gpios: See simple-panel.txt - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml new file mode 100644 index 000000000000..927f1eea18d2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel + +maintainers: + - Icenowy Zheng <icenowy@aosc.io> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: feixin,k101-im2ba02 + reg: true + backlight: true + reset-gpios: true + avdd-supply: + description: regulator that supplies the AVDD voltage + dvdd-supply: + description: regulator that supplies the DVDD voltage + cvdd-supply: + description: regulator that supplies the CVDD voltage + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - cvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "feixin,k101-im2ba02"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dc1sw>; + cvdd-supply = <®_ldo_io1>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt b/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt deleted file mode 100644 index b47f9d87bc19..000000000000 --- a/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt +++ /dev/null @@ -1,7 +0,0 @@ -Foxlink Group 5" WVGA TFT LCD panel - -Required properties: -- compatible: should be "foxlink,fl500wvr00-a0t" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt b/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt deleted file mode 100644 index 6c9156fc3478..000000000000 --- a/Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt +++ /dev/null @@ -1,32 +0,0 @@ -FriendlyELEC HD702E 800x1280 LCD panel - -HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 -resolution. It has built in Goodix, GT9271 captive touchscreen -with backlight adjustable via PWM. - -Required properties: -- compatible: should be "friendlyarm,hd702e" -- power-supply: regulator to provide the supply voltage - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Optional nodes: -- Video port for LCD panel input. - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Example: - - panel { - compatible ="friendlyarm,hd702e", "simple-panel"; - backlight = <&backlight>; - power-supply = <&vcc3v3_sys>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt b/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt deleted file mode 100644 index 24b0b624434b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt +++ /dev/null @@ -1,7 +0,0 @@ -GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel - -Required properties: -- compatible: should be "giantplus,gpg48273qs5" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt b/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt deleted file mode 100644 index 7da1d5c038ff..000000000000 --- a/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt +++ /dev/null @@ -1,7 +0,0 @@ -HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel - -Required properties: -- compatible: should be "hannstar,hsd070pww1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt b/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt deleted file mode 100644 index 8270319a99de..000000000000 --- a/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt +++ /dev/null @@ -1,7 +0,0 @@ -HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel - -Required properties: -- compatible: should be "hannstar,hsd100pxn1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt b/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt deleted file mode 100644 index 04caaae19af6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt +++ /dev/null @@ -1,7 +0,0 @@ -Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - -Required properties: -- compatible: should be "hit,tx23d38vm0caa" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt b/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt deleted file mode 100644 index 4104226b61bc..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux AT043TN24 4.3" WQVGA TFT LCD panel - -Required properties: -- compatible: should be "innolux,at043tn24" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt deleted file mode 100644 index 3e10cd782491..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux AT070TN92 7.0" WQVGA TFT LCD panel - -Required properties: -- compatible: should be "innolux,at070tn92" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt deleted file mode 100644 index 7c234cf68e11..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt +++ /dev/null @@ -1,12 +0,0 @@ -Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - -Required properties: -- compatible: should be "innolux,g070y2-l01" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt deleted file mode 100644 index 9e7590465227..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel - -Required properties: -- compatible: should be "innolux,g101ice-l01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt deleted file mode 100644 index 2743b07cd2f2..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel - -Required properties: -- compatible: should be "innolux,g121i1-l01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt deleted file mode 100644 index 649744620ae1..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel - -Required properties: -- compatible: should be "innolux,g121x1-l03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt b/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt deleted file mode 100644 index 081bb939ed31..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - -Required properties: -- compatible: should be "innolux,n116bge" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt b/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt deleted file mode 100644 index 7825844aafdf..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt +++ /dev/null @@ -1,7 +0,0 @@ -InnoLux 15.6" WXGA TFT LCD panel - -Required properties: -- compatible: should be "innolux,n156bge-l21" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt b/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt deleted file mode 100644 index 824f87f1526d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt +++ /dev/null @@ -1,7 +0,0 @@ -Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - -Required properties: -- compatible: should be "innolux,zj070na-01p" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt deleted file mode 100644 index be7ac666807b..000000000000 --- a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt +++ /dev/null @@ -1,42 +0,0 @@ -Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - -Required properties: -- compatible: should be "koe,tx14d24vm1bpa" -- backlight: phandle of the backlight device attached to the panel -- power-supply: single regulator to provide the supply voltage - -Required nodes: -- port: Parallel port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX53 based board - - lcd_panel: lcd-panel { - compatible = "koe,tx14d24vm1bpa"; - backlight = <&backlight_lcd>; - power-supply = <®_3v3>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - -Then one needs to extend the dispX node: - - lcd_display: disp1 { - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt deleted file mode 100644 index 6a036ede3e28..000000000000 --- a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt +++ /dev/null @@ -1,25 +0,0 @@ -Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Required properties: -- compatible: should be "koe,tx31d200vm0baa" - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Optional nodes: -- Video port for LVDS panel input. - -Example: - panel { - compatible = "koe,tx31d200vm0baa"; - backlight = <&backlight_lvds>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt deleted file mode 100644 index a8e940fe731e..000000000000 --- a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt +++ /dev/null @@ -1,7 +0,0 @@ -Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel - -Required properties: -- compatible: should be "kyo,tcg121xglp" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index a614644c9849..fd931b293816 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -34,7 +34,7 @@ additionalProperties: false examples: - | - dsi@ff450000 { + dsi { #address-cells = <1>; #size-cells = <0>; reg = <0xff450000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt deleted file mode 100644 index 74ee7ea6b493..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt +++ /dev/null @@ -1,12 +0,0 @@ -LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel - -Required properties: -- compatible: should be "lemaker,bl035-rgb-002" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt b/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt deleted file mode 100644 index a7588e5259cf..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 7" (800x480 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lb070wv8" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt b/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt deleted file mode 100644 index b9877acad012..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp079qx1-sp0v" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt deleted file mode 100644 index 42141516f078..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 9.7" (2048x1536 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp097qx1-spa1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt deleted file mode 100644 index 8c5de692c55c..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 12.0" (1920x1280 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp120up1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt b/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt deleted file mode 100644 index 9f262e0c5a2e..000000000000 --- a/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG 12.9" (2560x1700 pixels) TFT LCD panel - -Required properties: -- compatible: should be "lg,lp129qe" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt deleted file mode 100644 index 7d8f6eeef6d9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "mitsubishi,aa070mc01-ca1" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt b/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt deleted file mode 100644 index 71cbc49ecfab..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt +++ /dev/null @@ -1,8 +0,0 @@ -NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel - -Required properties: -- compatible: should be "nec,nl12880bc20-05" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt b/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt deleted file mode 100644 index 8e1914d1edb8..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt +++ /dev/null @@ -1,7 +0,0 @@ -NEC LCD Technologies,Ltd. WQVGA TFT LCD panel - -Required properties: -- compatible: should be "nec,nl4827hc19-05b" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt deleted file mode 100644 index c6d06b5eab51..000000000000 --- a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt +++ /dev/null @@ -1,7 +0,0 @@ -Netron-DY E231732 7.0" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "netron-dy,e231732" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt deleted file mode 100644 index e78292b1a131..000000000000 --- a/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt +++ /dev/null @@ -1,7 +0,0 @@ -Newhaven Display International 480 x 272 TFT LCD panel - -Required properties: -- compatible: should be "newhaven,nhd-4.3-480272ef-atxl" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt b/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt deleted file mode 100644 index 1a639fd8778d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt +++ /dev/null @@ -1,8 +0,0 @@ -NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel - -Required properties: -- compatible: should be "nlt,nl192108ac18-02d" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml new file mode 100644 index 000000000000..73d2ff3baaff --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35510-based display panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: hydis,hva40wv1 + - const: novatek,nt35510 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35510 panel driver. The compatible + string determines how the NT35510 panel driver shall be configured + to work with the indicated panel. The novatek,nt35510 compatible shall + always be provided as a fallback. + reg: true + reset-gpios: true + vdd-supply: + description: regulator that supplies the vdd voltage + vddi-supply: + description: regulator that supplies the vddi voltage + backlight: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hydis,hva40wv1", "novatek,nt35510"; + reg = <0>; + vdd-supply = <&ab8500_ldo_aux4_reg>; + vddi-supply = <&ab8500_ldo_aux6_reg>; + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + backlight = <&gpio_bl>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/nvd,9128.txt b/Documentation/devicetree/bindings/display/panel/nvd,9128.txt deleted file mode 100644 index 17bcd017c678..000000000000 --- a/Documentation/devicetree/bindings/display/panel/nvd,9128.txt +++ /dev/null @@ -1,7 +0,0 @@ -New Vision Display 7.0" 800 RGB x 480 TFT LCD panel - -Required properties: -- compatible: should be "nvd,9128" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt b/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt deleted file mode 100644 index ddf8e211d382..000000000000 --- a/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt +++ /dev/null @@ -1,7 +0,0 @@ -OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel - -Required properties: -- compatible: should be "okaya,rs800480t-7x0gp" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt deleted file mode 100644 index 74540a090669..000000000000 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt +++ /dev/null @@ -1,7 +0,0 @@ -Olimex 4.3" TFT LCD panel - -Required properties: -- compatible: should be "olimex,lcd-olinuxino-43-ts" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt deleted file mode 100644 index 3d8a5e029242..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt +++ /dev/null @@ -1,7 +0,0 @@ -On Tat Industrial Company 7" DPI TFT panel. - -Required properties: -- compatible: should be "ontat,yx700wv03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt deleted file mode 100644 index 203b03eefb68..000000000000 --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt +++ /dev/null @@ -1,23 +0,0 @@ -Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) - -The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using -a MIPI-DSI video interface. Its backlight is managed through the DSI link. - -Required properties: - - compatible: "orisetech,otm8009a" - - reg: the virtual channel number of a DSI peripheral - -Optional properties: - - reset-gpios: a GPIO spec for the reset pin (active low). - - power-supply: phandle of the regulator that provides the supply voltage. - -Example: -&dsi { - ... - panel@0 { - compatible = "orisetech,otm8009a"; - reg = <0>; - reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; - power-supply = <&v1v8>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml new file mode 100644 index 000000000000..4b6dda6dbc0f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using + a MIPI-DSI video interface. Its backlight is managed through the DSI link. +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + const: orisetech,otm8009a + + reg: + maxItems: 1 + description: DSI virtual channel + + enable-gpios: true + port: true + power-supply: true + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpiof 15 0>; + power-supply = <&v1v8>; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt deleted file mode 100644 index c16907c02f80..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt +++ /dev/null @@ -1,12 +0,0 @@ -OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel - -Required properties: -- compatible: should be "ortustech,com37h3m05dtc" - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- power-supply: phandle of the regulator that provides the supply voltage - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt deleted file mode 100644 index 06a73c3f46b5..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt +++ /dev/null @@ -1,12 +0,0 @@ -OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel - -Required properties: -- compatible: should be "ortustech,com37h3m99dtc" - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- power-supply: phandle of the regulator that provides the supply voltage - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt deleted file mode 100644 index de19e9398618..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt +++ /dev/null @@ -1,7 +0,0 @@ -OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel - -Required properties: -- compatible: should be "ortustech,com43h4m85ulc" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt deleted file mode 100644 index e57883ccdf2f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt +++ /dev/null @@ -1,12 +0,0 @@ -OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel - -Required properties: -- compatible: shall be "osddisplays,osd070t1718-19ts" -- power-supply: see simple-panel.txt - -Optional properties: -- backlight: see simple-panel.txt - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. No other simple-panel properties than -the ones specified herein are valid. diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt deleted file mode 100644 index 85c0b2cacfda..000000000000 --- a/Documentation/devicetree/bindings/display/panel/osddisplays,osd101t2045-53ts.txt +++ /dev/null @@ -1,11 +0,0 @@ -One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel - -Required properties: -- compatible: should be "osddisplays,osd101t2045-53ts" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt deleted file mode 100644 index d328b0341bf4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt +++ /dev/null @@ -1,7 +0,0 @@ -Panasonic Corporation 10.1" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "panasonic,vvx10f004b00" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt deleted file mode 100644 index 37dedf6a6702..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt +++ /dev/null @@ -1,20 +0,0 @@ -Panasonic 10" WUXGA TFT LCD panel - -Required properties: -- compatible: should be "panasonic,vvx10f034n00" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - mdss_dsi@fd922800 { - panel@0 { - compatible = "panasonic,vvx10f034n00"; - reg = <0>; - power-supply = <&vreg_vsp>; - backlight = <&lp8566_wled>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index ef8d8cdfcede..ed051ba12084 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -54,13 +54,20 @@ properties: # Display Timings panel-timing: - type: object description: Most display panels are restricted to a single resolution and require specific display timings. The panel-timing subnode expresses those - timings as specified in the timing subnode section of the display timing - bindings defined in - Documentation/devicetree/bindings/display/panel/display-timing.txt. + timings. + allOf: + - $ref: panel-timing.yaml# + + display-timings: + description: + Some display panels supports several resolutions with different timing. + The display-timings bindings supports specifying several timings and + optional specify which is the native mode. + allOf: + - $ref: display-timings.yaml# # Connectivity port: diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt deleted file mode 100644 index 6b203bc4d932..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt +++ /dev/null @@ -1,50 +0,0 @@ -Generic MIPI DPI Panel -====================== - -Required properties: -- compatible: "panel-dpi" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: panel enable gpio -- reset-gpios: GPIO to control the RESET pin -- vcc-supply: phandle of regulator that will be used to enable power to the display -- backlight: phandle of the backlight device - -Required nodes: -- "panel-timing" containing video timings - (Documentation/devicetree/bindings/display/panel/display-timing.txt) -- Video port for DPI input - -Example -------- - -lcd0: display@0 { - compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; - - backlight = <&backlight>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - panel-timing { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml new file mode 100644 index 000000000000..f63870384c00 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic MIPI DPI Panel + +maintainers: + - Sam Ravnborg <sam@ravnborg.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + description: + Shall contain a panel specific compatible and "panel-dpi" + in that order. + items: + - {} + - const: panel-dpi + + data-mapping: + enum: + - rgb24 + - rgb565 + - bgr666 + description: | + Describes the media format, how the display panel is connected + to the display interface. + + backlight: true + enable-gpios: true + height-mm: true + label: true + panel-timing: true + port: true + power-supply: true + reset-gpios: true + width-mm: true + +required: + - panel-timing + - power-supply + +additionalProperties: false + +examples: + - | + panel { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "osddisplay"; + power-supply = <&vcc_supply>; + data-mapping = "rgb565"; + backlight = <&backlight>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + panel-timing { + clock-frequency = <9200000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml new file mode 100644 index 000000000000..b2e8742fd6af --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple DSI panels with a single power-supply + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the DSI panels that + requires only a single power-supply. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # Panasonic 10" WUXGA TFT LCD panel + - panasonic,vvx10f034n00 + + reg: + maxItems: 1 + description: DSI virtual channel + + backlight: true + enable-gpios: true + port: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - power-supply + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + + port { + panel: endpoint { + remote-endpoint = <<dc_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 8fe60ee2531c..393ffc6acbba 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -33,16 +33,225 @@ properties: - ampire,am-480272h3tmqw-t01h # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - ampire,am800480r3tmqwa1h + # AU Optronics Corporation 8.0" WUXGA TFT LCD panel + - auo,b080uan01 + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101aw03 + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101ean01 + # AU Optronics Corporation 10.1" WXGA TFT LCD panel + - auo,b101xtn01 # AUO B116XAK01 eDP TFT LCD panel - auo,b116xa01 + # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel + - auo,b116xw03 + # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + - auo,b133htn01 + # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel + - auo,b133xtn01 + # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel + - auo,g070vvn01 + # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + - auo,g101evn010 + # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel + - auo,g104sn02 + # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel + - auo,g133han01 + # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel + - auo,g185han01 + # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel + - auo,p320hvn03 + # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel + - auo,t215hvn01 + # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel + - avic,tm070ddh03 + # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + - boe,hv070wsa-100 + # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel + - boe,nv101wxmn51 # BOE NV140FHM-N49 14.0" FHD a-Si FT panel - boe,nv140fhmn49 + # Boe Corporation 8.0" WUXGA TFT LCD panel + - boe,tv080wum-nl0 + # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel + - cdtech,s043wq26h-ct7 + # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel + - cdtech,s070wv95-ct16 + # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel + - chunghwa,claa070wp03xg + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wa01a + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wb03 + # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. + - dataimage,scf0700c48ggu18 + # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel + - dlc,dlc1010gig + # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel + - edt,et035012dm6 + # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch + - edt,etm043080dh6gp + # Emerging Display Technology Corp. 480x272 TFT Display + - edt,etm0430g0dh6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + - edt,etm0700g0dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same as ETM0700G0DH6 but with inverted pixel clock. + - edt,etm070080bdh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same display as the ETM0700G0BDH6, but with changed hardware for the + # backlight and the touch interface. + - edt,etm070080edh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel + - evervision,vgg804821 + # Foxlink Group 5" WVGA TFT LCD panel + - foxlink,fl500wvr00-a0t + # Frida FRD350H54004 3.5" QVGA TFT LCD panel + - frida,frd350h54004 + # FriendlyELEC HD702E 800x1280 LCD panel + - friendlyarm,hd702e + # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel + - giantplus,gpg48273qs5 # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel - giantplus,gpm940b0 + # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel + - hannstar,hsd070pww1 + # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel + - hannstar,hsd100pxn1 + # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel + - hit,tx23d38vm0caa + # Innolux AT043TN24 4.3" WQVGA TFT LCD panel + - innolux,at043tn24 + # Innolux AT070TN92 7.0" WQVGA TFT LCD panel + - innolux,at070tn92 + # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel + - innolux,g070y2-l01 + # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel + - innolux,g101ice-l01 + # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel + - innolux,g121i1-l01 + # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel + - innolux,g121x1-l03 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bge + # InnoLux 15.6" WXGA TFT LCD panel + - innolux,n156bge-l21 + # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel + - innolux,zj070na-01p + # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + - koe,tx14d24vm1bpa + # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel + - koe,tx31d200vm0baa + # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel + - kyo,tcg121xglp + # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + - lemaker,bl035-rgb-002 + # LG 7" (800x480 pixels) TFT LCD panel + - lg,lb070wv8 + # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel + - lg,lp079qx1-sp0v + # LG 9.7" (2048x1536 pixels) TFT LCD panel + - lg,lp097qx1-spa1 + # LG 12.0" (1920x1280 pixels) TFT LCD panel + - lg,lp120up1 + # LG 12.9" (2560x1700 pixels) TFT LCD panel + - lg,lp129qe + # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module + - logictechno,lt161010-2nhc + # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module + - logictechno,lt161010-2nhr + # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod. + - logictechno,lt170410-2whc + # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel + - mitsubishi,aa070mc01-ca1 + # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel + - nec,nl12880bc20-05 + # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel + - nec,nl4827hc19-05b + # Netron-DY E231732 7.0" WSVGA TFT LCD panel + - netron-dy,e231732 + # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel + - neweast,wjfh116008a + # Newhaven Display International 480 x 272 TFT LCD panel + - newhaven,nhd-4.3-480272ef-atxl + # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel + - nlt,nl192108ac18-02d + # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel + - nvd,9128 + # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel + - okaya,rs800480t-7x0gp + # Olimex 4.3" TFT LCD panel + - olimex,lcd-olinuxino-43-ts + # On Tat Industrial Company 7" DPI TFT panel. + - ontat,yx700wv03 + # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel + - ortustech,com37h3m05dtc + # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel + - ortustech,com37h3m99dtc + # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel + - ortustech,com43h4m85ulc + # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel + - osddisplays,osd070t1718-19ts + # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel + - osddisplays,osd101t2045-53ts + # QiaoDian XianShi Corporation 4"3 TFT LCD panel + - qiaodian,qd43003c0-40 + # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 + - rocktech,rk101ii01d-ct + # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel + - rocktech,rk070er9427 + # Samsung 12.2" (2560x1600 pixels) TFT LCD panel + - samsung,lsn122dl01-c01 + # Samsung Electronics 10.1" WSVGA TFT LCD panel + - samsung,ltn101nt05 + # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel + - samsung,ltn140at29-301 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel - satoz,sat050at40h12r2 + # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel + - sharp,lq035q7db03 + # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel + - sharp,lq070y3dg3b + # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel + - sharp,lq101k1ly04 + # Sharp 12.3" (2400x1600 pixels) TFT LCD panel + - sharp,lq123p1jx31 # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel - sharp,ls020b1dd01d + # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel + - shelly,sca07010-bfn-lnn + # Starry 12.2" (1920x1200 pixels) TFT LCD panel + - starry,kr122ea0sra + # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel + - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel + - tianma,tm070rvhg71 + # Toshiba 8.9" WXGA (1280x768) TFT LCD panel + - toshiba,lt089ac29000 + # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch + - tpk,f07a-0102 + # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch + - tpk,f10a-0102 + # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel + # Supported are LVDS versions (-11T, -19T) and parallel ones + # (-T, -1T, -7T, -20T). + - urt,umsh-8596md-t + - urt,umsh-8596md-1t + - urt,umsh-8596md-7t + - urt,umsh-8596md-11t + - urt,umsh-8596md-19t + - urt,umsh-8596md-20t + # VXT 800x480 color TFT LCD panel + - vxt,vl050-8048nt-c01 + # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel + - winstar,wf35ltiacd backlight: true enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml new file mode 100644 index 000000000000..bd558ad7891f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -0,0 +1,227 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: panel timing bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + There are different ways of describing the timing data of a panel. The + devicetree representation corresponds to the one commonly found in datasheets + for panels. + + The parameters are defined as seen in the following illustration. + + +----------+-------------------------------------+----------+-------+ + | | ^ | | | + | | |vback_porch | | | + | | v | | | + +----------#######################################----------+-------+ + | # ^ # | | + | # | # | | + | hback # | # hfront | hsync | + | porch # | hactive # porch | len | + |<-------->#<-------+--------------------------->#<-------->|<----->| + | # | # | | + | # |vactive # | | + | # | # | | + | # v # | | + +----------#######################################----------+-------+ + | | ^ | | | + | | |vfront_porch | | | + | | v | | | + +----------+-------------------------------------+----------+-------+ + | | ^ | | | + | | |vsync_len | | | + | | v | | | + +----------+-------------------------------------+----------+-------+ + + + The following is the panel timings shown with time on the x-axis. + This matches the timing diagrams often found in data sheets. + + Active Front Sync Back + Region Porch Porch + <-----------------------><----------------><-------------><--------------> + //////////////////////| + ////////////////////// | + ////////////////////// |.................. ................ + _______________ + + Timing can be specified either as a typical value or as a tuple + of min, typ, max values. + +properties: + + clock-frequency: + description: Panel clock in Hz + + hactive: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Horizontal panel resolution in pixels + + vactive: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vertical panel resolution in pixels + + hfront-porch: + description: Horizontal front porch panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of pixels + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + hback-porch: + description: Horizontal back porch timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of pixels + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + hsync-len: + description: Horizontal sync length panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of pixels + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + vfront-porch: + description: Vertical front porch panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of lines + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + vback-porch: + description: Vertical back porch panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of lines + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + vsync-len: + description: Vertical sync length panel timing + oneOf: + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maxItems: 1 + items: + description: typical number of lines + - allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + hsync-active: + description: | + Horizontal sync pulse. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + vsync-active: + description: | + Vertical sync pulse. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + de-active: + description: | + Data enable. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + pixelclk-active: + description: | + Data driving on rising or falling edge. + Use 0 to drive pixel data on falling edge and + sample data on rising edge. + Use 1 to drive pixel data on rising edge and + sample data on falling edge + enum: [0, 1] + + syncclk-active: + description: | + Drive sync on rising or sample sync on falling edge. + If not specified then the setup is as specified by pixelclk-active. + Use 0 to drive sync on falling edge and + sample sync on rising edge of pixel clock. + Use 1 to drive sync on rising edge and + sample sync on falling edge of pixel clock + enum: [0, 1] + + interlaced: + type: boolean + description: Enable interlaced mode + + doublescan: + type: boolean + description: Enable double scan mode + + doubleclk: + type: boolean + description: Enable double clock mode + +required: + - clock-frequency + - hactive + - vactive + - hfront-porch + - hback-porch + - hsync-len + - vfront-porch + - vback-porch + - vsync-len + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt deleted file mode 100644 index 0fbdab89ac3d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt +++ /dev/null @@ -1,7 +0,0 @@ -QiaoDian XianShi Corporation 4"3 TFT LCD panel - -Required properties: -- compatible: should be "qiaodian,qd43003c0-40" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt deleted file mode 100644 index cbb79ef3bfc9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt +++ /dev/null @@ -1,25 +0,0 @@ -Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel - -The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD -panel connected using a MIPI-DSI video interface. - -Required properties: - - compatible: "raydium,rm68200" - - reg: the virtual channel number of a DSI peripheral - -Optional properties: - - reset-gpios: a GPIO spec for the reset pin (active low). - - power-supply: phandle of the regulator that provides the supply voltage. - - backlight: phandle of the backlight device attached to the panel. - -Example: -&dsi { - ... - panel@0 { - compatible = "raydium,rm68200"; - reg = <0>; - reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; - power-supply = <&v1v8>; - backlight = <&pwm_backlight>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml new file mode 100644 index 000000000000..a35ba16fc000 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD + panel connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + const: raydium,rm68200 + + reg: + maxItems: 1 + description: DSI virtual channel + + backlight: true + enable-gpios: true + port: true + power-supply: true + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - power-supply + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "raydium,rm68200"; + reg = <0>; + reset-gpios = <&gpiof 15 0>; + power-supply = <&v1v8>; + backlight = <&pwm_backlight>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt deleted file mode 100644 index eb1fb9f8d1f4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt +++ /dev/null @@ -1,25 +0,0 @@ -Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Required properties: -- compatible: should be "rocktech,rk070er9427" - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Optional nodes: -- Video port for LCD panel input. - -Example: - panel { - compatible = "rocktech,rk070er9427"; - backlight = <&backlight_lcd>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt b/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt deleted file mode 100644 index dba298b43b24..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt +++ /dev/null @@ -1,7 +0,0 @@ -Samsung 12.2" (2560x1600 pixels) TFT LCD panel - -Required properties: -- compatible: should be "samsung,lsn122dl01-c01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt b/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt deleted file mode 100644 index ef522c6bb85f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt +++ /dev/null @@ -1,7 +0,0 @@ -Samsung Electronics 10.1" WSVGA TFT LCD panel - -Required properties: -- compatible: should be "samsung,ltn101nt05" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt b/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt deleted file mode 100644 index e7f969d891cc..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt +++ /dev/null @@ -1,7 +0,0 @@ -Samsung Electronics 14" WXGA (1366x768) TFT LCD panel - -Required properties: -- compatible: should be "samsung,ltn140at29-301" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml new file mode 100644 index 000000000000..7a685d0428b3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e88a0-ams452ef01 + reg: true + reset-gpios: true + vdd3-supply: + description: core voltage supply + vci-supply: + description: voltage supply for analog circuits + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + reg = <0>; + + compatible = "samsung,s6e88a0-ams452ef01"; + + vdd3-supply = <&pm8916_l17>; + vci-supply = <®_vlcd_vci>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt deleted file mode 100644 index 0753f6967279..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq035q7db03" -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt deleted file mode 100644 index 95534b55ee5f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq070y3dg3b" - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- power-supply: phandle of the regulator that provides the supply voltage - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt deleted file mode 100644 index 4aff25b8dfe6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt +++ /dev/null @@ -1,7 +0,0 @@ -Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq101k1ly04" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt deleted file mode 100644 index bcb0e8a29f71..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt +++ /dev/null @@ -1,7 +0,0 @@ -Sharp 12.3" (2400x1600 pixels) TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq123p1jx31" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt b/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt deleted file mode 100644 index fc1ea9e26c94..000000000000 --- a/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt +++ /dev/null @@ -1,7 +0,0 @@ -Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "shelly,sca07010-bfn-lnn" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt b/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt deleted file mode 100644 index 1e87fe6078af..000000000000 --- a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt +++ /dev/null @@ -1,7 +0,0 @@ -Starry 12.2" (1920x1200 pixels) TFT LCD panel - -Required properties: -- compatible: should be "starry,kr122ea0sra" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt deleted file mode 100644 index eb9501a82e25..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt +++ /dev/null @@ -1,7 +0,0 @@ -Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - -Required properties: -- compatible: should be "tianma,tm070jdhg30" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt deleted file mode 100644 index b25261e63a6d..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt +++ /dev/null @@ -1,29 +0,0 @@ -Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel - -Required properties: -- compatible: should be "tianma,tm070rvhg71" -- power-supply: single regulator to provide the supply voltage -- backlight: phandle of the backlight device attached to the panel - -Required nodes: -- port: LVDS port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX6Q based board - - panel: panel-lvds0 { - compatible = "tianma,tm070rvhg71"; - backlight = <&backlight_lvds>; - power-supply = <®_lvds>; - - port { - panel_in_lvds0: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt deleted file mode 100644 index 89826116628c..000000000000 --- a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt +++ /dev/null @@ -1,8 +0,0 @@ -Toshiba 8.9" WXGA (1280x768) TFT LCD panel - -Required properties: -- compatible: should be "toshiba,lt089ac29000" -- power-supply: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt deleted file mode 100644 index a2613b9675df..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt +++ /dev/null @@ -1,8 +0,0 @@ -TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with, -800 x 480 (WVGA) LCD panel. - -Required properties: -- compatible: should be "tpk,f07a-0102" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt deleted file mode 100644 index b9d051196ba9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt +++ /dev/null @@ -1,8 +0,0 @@ -TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with, -1024 x 600 (WSVGA) LCD panel. - -Required properties: -- compatible: should be "tpk,f10a-0102" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt b/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt deleted file mode 100644 index 088a6cea5015..000000000000 --- a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt +++ /dev/null @@ -1,16 +0,0 @@ -United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel - -Supported are LVDS versions (-11T, -19T) and parallel ones -(-T, -1T, -7T, -20T). - -Required properties: -- compatible: should be one of: - "urt,umsh-8596md-t", - "urt,umsh-8596md-1t", - "urt,umsh-8596md-7t", - "urt,umsh-8596md-11t", - "urt,umsh-8596md-19t", - "urt,umsh-8596md-20t". - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt b/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt deleted file mode 100644 index b42bf06bbd99..000000000000 --- a/Documentation/devicetree/bindings/display/panel/vl050_8048nt_c01.txt +++ /dev/null @@ -1,12 +0,0 @@ -VXT 800x480 color TFT LCD panel - -Required properties: -- compatible: should be "vxt,vl050-8048nt-c01" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding -- enable-gpios: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt deleted file mode 100644 index 2a7e6e3ba64c..000000000000 --- a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt +++ /dev/null @@ -1,48 +0,0 @@ -Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel - -Required properties: -- compatible: should be "winstar,wf35ltiacd" -- power-supply: regulator to provide the VCC supply voltage (3.3 volts) - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Example: - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 31 63 95 127 159 191 223 255>; - default-brightness-level = <191>; - power-supply = <&bl_reg>; - }; - - bl_reg: backlight_regulator { - compatible = "regulator-fixed"; - regulator-name = "backlight-power-supply"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - panel: panel { - compatible = "winstar,wf35ltiacd", "simple-panel"; - backlight = <&backlight>; - power-supply = <&panel_reg>; - #address-cells = <1>; - #size-cells = <0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint { - remote-endpoint = <&hlcdc_panel_output>; - }; - }; - }; - - panel_reg: panel_regulator { - compatible = "regulator-fixed"; - regulator-name = "panel-power-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index 22c91beb0541..d9fdb58e06b4 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -34,7 +34,7 @@ additionalProperties: false examples: - | - dsi@ff450000 { + dsi { #address-cells = <1>; #size-cells = <0>; reg = <0xff450000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt deleted file mode 100644 index 5707af89319d..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt +++ /dev/null @@ -1,19 +0,0 @@ -Rockchip DRM master device -================================ - -The Rockchip DRM master device is a virtual device needed to list all -vop devices or other display interface nodes that comprise the -graphics subsystem. - -Required properties: -- compatible: Should be "rockchip,display-subsystem" -- ports: Should contain a list of phandles pointing to display interface port - of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt - -example: - -display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; -}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml new file mode 100644 index 000000000000..ec8ae742d4da --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DRM master device + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip DRM master device is a virtual device needed to list all + vop devices or other display interface nodes that comprise the + graphics subsystem. + +properties: + compatible: + const: rockchip,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Should contain a list of phandles pointing to display interface port + of vop devices. vop definitions as defined in + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt deleted file mode 100644 index cd5c7186890a..000000000000 --- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt +++ /dev/null @@ -1,35 +0,0 @@ -Sitronix ST7735R display panels - -This binding is for display panels using a Sitronix ST7735R controller in SPI -mode. - -Required properties: -- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" -- dc-gpios: Display data/command selection (D/CX) -- reset-gpios: Reset signal (RSTX) - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ... - - display@0{ - compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = &backlight; - }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file mode 100644 index 000000000000..0cebaaefda03 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7735R Display Panels Device Tree Bindings + +maintainers: + - David Lechner <david@lechnology.com> + +description: + This binding is for display panels using a Sitronix ST7715R or ST7735R + controller in SPI mode. + +allOf: + - $ref: panel/panel-common.yaml# + +properties: + compatible: + oneOf: + - description: + Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618) + items: + - enum: + - jianda,jd-t18003-t01 + - const: sitronix,st7735r + - description: + Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD) + items: + - enum: + - okaya,rh128128t + - const: sitronix,st7715r + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + rotation = <270>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml new file mode 100644 index 000000000000..cac61a998203 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments AM65x Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The AM65x TI Keystone Display SubSystem with two output ports and + two video planes. The first video port supports OLDI and the second + supports DPI format. The fist plane is full video plane with all + features and the second is a "lite plane" without scaling support. + +properties: + compatible: + const: ti,am65x-dss + + reg: + description: + Addresses to each DSS memory region described in the SoC's TRM. + items: + - description: common DSS register area + - description: VIDL1 light video plane + - description: VID video plane + - description: OVR1 overlay manager for vp1 + - description: OVR2 overlay manager for vp2 + - description: VP1 video port 1 + - description: VP2 video port 2 + + reg-names: + items: + - const: common + - const: vidl1 + - const: vid + - const: ovr1 + - const: ovr2 + - const: vp1 + - const: vp2 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + - description: vp2 Video Port 2 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + - const: vp2 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + ports: + type: object + description: + Ports as described in Documentation/devictree/bindings/graph.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + The DSS OLDI output port node form video port 1 + + port@1: + type: object + description: + The DSS DPI output port node from video port 2 + + required: + - "#address-cells" + - "#size-cells" + + ti,am65x-oldi-io-ctrl: + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + - maxItems: 1 + description: + phandle to syscon device node mapping OLDI IO_CTRL registers. + The mapped range should point to OLDI_DAT0_IO_CTRL, map it and + following OLDI_DAT1_IO_CTRL, OLDI_DAT2_IO_CTRL, OLDI_DAT3_IO_CTRL, + and OLDI_CLK_IO_CTRL registers. This property is needed for OLDI + interface to work. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dss: dss@04a00000 { + compatible = "ti,am65x-dss"; + reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ + <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ + <0x0 0x04a06000 0x0 0x1000>, /* vid */ + <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ + <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ + <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ + <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + reg-names = "common", "vidl1", "vid", + "ovr1", "ovr2", "vp1", "vp2"; + ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 67 1>, + <&k3_clks 216 1>, + <&k3_clks 67 2>; + clock-names = "fck", "vp1", "vp2"; + interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + oldi_out0: endpoint { + remote-endpoint = <&lcd_in0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml new file mode 100644 index 000000000000..ade9b2f513f5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments J721E Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The J721E TI Keystone Display SubSystem with four output ports and + four video planes. There is two full video planes and two "lite + planes" without scaling support. The video ports can be connected to + the SoC's DPI pins or to integrated display bridges on the SoC. + +properties: + compatible: + const: ti,j721e-dss + + reg: + items: + - description: common_m DSS Master common + - description: common_s0 DSS Shared common 0 + - description: common_s1 DSS Shared common 1 + - description: common_s2 DSS Shared common 2 + - description: VIDL1 light video plane 1 + - description: VIDL2 light video plane 2 + - description: VID1 video plane 1 + - description: VID1 video plane 2 + - description: OVR1 overlay manager for vp1 + - description: OVR2 overlay manager for vp2 + - description: OVR3 overlay manager for vp3 + - description: OVR4 overlay manager for vp4 + - description: VP1 video port 1 + - description: VP2 video port 2 + - description: VP3 video port 3 + - description: VP4 video port 4 + - description: WB Write Back + + reg-names: + items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + - const: vidl1 + - const: vidl2 + - const: vid1 + - const: vid2 + - const: ovr1 + - const: ovr2 + - const: ovr3 + - const: ovr4 + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + - const: wb + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + - description: vp2 Video Port 2 pixel clock + - description: vp3 Video Port 3 pixel clock + - description: vp4 Video Port 4 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + + interrupts: + items: + - description: common_m DSS Master common + - description: common_s0 DSS Shared common 0 + - description: common_s1 DSS Shared common 1 + - description: common_s2 DSS Shared common 2 + + interrupt-names: + items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + ports: + type: object + description: + Ports as described in Documentation/devictree/bindings/graph.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + The output port node form video port 1 + + port@1: + type: object + description: + The output port node from video port 2 + + port@2: + type: object + description: + The output port node from video port 3 + + port@3: + type: object + description: + The output port node from video port 4 + + required: + - "#address-cells" + - "#size-cells" + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dss: dss@04a00000 { + compatible = "ti,j721e-dss"; + reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */ + <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/ + <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/ + <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/ + <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */ + <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */ + <0x00 0x04a50000 0x00 0x10000>, /* vid1 */ + <0x00 0x04a60000 0x00 0x10000>, /* vid2 */ + <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */ + <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */ + <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */ + <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */ + <0x00 0x04a80000 0x00 0x10000>, /* vp1 */ + <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */ + <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */ + <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */ + <0x00 0x04af0000 0x00 0x10000>; /* wb */ + reg-names = "common_m", "common_s0", + "common_s1", "common_s2", + "vidl1", "vidl2","vid1","vid2", + "ovr1", "ovr2", "ovr3", "ovr4", + "vp1", "vp2", "vp3", "vp4", + "wb"; + clocks = <&k3_clks 152 0>, + <&k3_clks 152 1>, + <&k3_clks 152 4>, + <&k3_clks 152 9>, + <&k3_clks 152 13>; + clock-names = "fck", "vp1", "vp2", "vp3", "vp4"; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common_m", + "common_s0", + "common_s1", + "common_s2"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpi_out_0: endpoint { + remote-endpoint = <&dp_bridge_input>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml new file mode 100644 index 000000000000..385bd060ccf9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments K2G Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The K2G DSS is an ultra-light version of TI Keystone Display + SubSystem. It has only one output port and video plane. The + output is DPI. + +properties: + compatible: + const: ti,k2g-dss + + reg: + items: + - description: cfg DSS top level + - description: common DISPC common + - description: VID1 video plane 1 + - description: OVR1 overlay manager for vp1 + - description: VP1 video port 1 + + reg-names: + items: + - const: cfg + - const: common + - const: vid1 + - const: ovr1 + - const: vp1 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + port: + type: object + description: + Port as described in Documentation/devictree/bindings/graph.txt. + The DSS DPI output port node + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + dss: dss@02540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; + + power-domains = <&k2g_pds 0x2>; + + max-memory-bandwidth = <230000000>; + + port { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index f1f95f678739..e8f6c42e80f2 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -16,6 +16,7 @@ Required Properties: - "renesas,r8a7794-usb-dmac" (R-Car E2) - "renesas,r8a7795-usb-dmac" (R-Car H3) - "renesas,r8a7796-usb-dmac" (R-Car M3-W) + - "renesas,r8a77961-usb-dmac" (R-Car M3-W+) - "renesas,r8a77965-usb-dmac" (R-Car M3-N) - "renesas,r8a77990-usb-dmac" (R-Car E3) - "renesas,r8a77995-usb-dmac" (R-Car D3) diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index 2ca3ddbe1ff4..e7f2ad7dab5e 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -43,6 +43,8 @@ required: - interrupts - '#dma-cells' +additionalProperties: false + examples: - | dma@3000000 { diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml new file mode 100644 index 000000000000..e7bf6dd7da29 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier Media IO DMA controller + +description: | + This works as an external DMA engine for SD/eMMC controllers etc. + found in UniPhier LD4, Pro4, sLD8 SoCs. + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + const: socionext,uniphier-mio-dmac + + reg: + maxItems: 1 + + interrupts: + description: | + A list of interrupt specifiers associated with the DMA channels. + The number of interrupt lines is SoC-dependent. + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + '#dma-cells': + description: The single cell represents the channel index. + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - '#dma-cells' + +additionalProperties: false + +examples: + - | + // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a + // typo. The first two channels share a single interrupt line. + + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml new file mode 100644 index 000000000000..86cfb599256e --- /dev/null +++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/socionext,uniphier-xdmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier external DMA controller + +description: | + This describes the devicetree bindings for an external DMA engine to perform + memory-to-memory or peripheral-to-memory data transfer capable of supporting + 16 channels, implemented in Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + const: socionext,uniphier-xdmac + + reg: + items: + - description: XDMAC base register region (offset and length) + - description: XDMAC extension register region (offset and length) + + interrupts: + maxItems: 1 + + "#dma-cells": + const: 2 + description: | + DMA request from clients consists of 2 cells: + 1. Channel index + 2. Transfer request factor number, If no transfer factor, use 0. + The number is SoC-specific, and this should be specified with + relation to the device to use the DMA controller. + + dma-channels: + minimum: 1 + maximum: 16 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + +examples: + - | + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>; + interrupts = <0 188 4>; + #dma-cells = <2>; + dma-channels = <16>; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 0e1398f93aa2..29fcd37082e8 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -180,7 +180,7 @@ edma1_tptc0: tptc@27b0000 { }; edma1_tptc1: tptc@27b8000 { - compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; }; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 34780d7535b8..39ea05e6e5ff 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -45,7 +45,8 @@ allOf: properties: "#dma-cells": - const: 1 + minimum: 1 + maximum: 2 description: | The cell is the PSI-L thread ID of the remote (to UDMAP) end. Valid ranges for thread ID depends on the data movement direction: @@ -55,6 +56,8 @@ properties: Please refer to the device documentation for the PSI-L thread map and also the PSI-L peripheral chapter for the correct thread ID. + When #dma-cells is 2, the second parameter is the channel ATYPE. + compatible: enum: - ti,am654-navss-main-udmap @@ -131,6 +134,20 @@ required: - ti,sci-rm-range-rchan - ti,sci-rm-range-rflow +if: + properties: + "#dma-cells": + const: 2 +then: + properties: + ti,udma-atype: + description: ATYPE value which should be used by non slave channels + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - ti,udma-atype + examples: - |+ cbass_main { diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt deleted file mode 100644 index b12388dc7eac..000000000000 --- a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt +++ /dev/null @@ -1,25 +0,0 @@ -UniPhier Media IO DMA controller - -This works as an external DMA engine for SD/eMMC controllers etc. -found in UniPhier LD4, Pro4, sLD8 SoCs. - -Required properties: -- compatible: should be "socionext,uniphier-mio-dmac". -- reg: offset and length of the register set for the device. -- interrupts: a list of interrupt specifiers associated with the DMA channels. -- clocks: a single clock specifier. -- #dma-cells: should be <1>. The single cell represents the channel index. - -Example: - dmac: dma-controller@5a000000 { - compatible = "socionext,uniphier-mio-dmac"; - reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; - clocks = <&mio_clk 7>; - #dma-cells = <1>; - }; - -Note: -In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo. -The first two channels share a single interrupt line. diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index f04870d84542..a5dc070d0ca7 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -68,6 +68,8 @@ required: - mbox-names - memory-region +additionalProperties: false + examples: - | #include <dt-bindings/firmware/imx/rsrc.h> diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 0f6d8db18d6c..a15787e504f0 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -172,6 +172,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 4ddcf709cc3c..62811a1b5058 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -7,9 +7,9 @@ # $id is a unique identifier based on the filename. There may or may not be a # file present at the URL. -$id: "http://devicetree.org/schemas/example-schema.yaml#" +$id: http://devicetree.org/schemas/example-schema.yaml# # $schema is the meta-schema this schema should be validated with. -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$schema: http://devicetree.org/meta-schemas/core.yaml# title: An example schema annotated with jsonschema details diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt deleted file mode 100644 index 8e8625c00dfa..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt +++ /dev/null @@ -1,24 +0,0 @@ -ChromeOS EC USB Type-C cable and accessories detection - -On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is -able to detect the state of external accessories such as display adapters -or USB devices when said accessories are attached or detached. - -The node for this device must be under a cros-ec node like google,cros-ec-spi -or google,cros-ec-i2c. - -Required properties: -- compatible: Should be "google,extcon-usbc-cros-ec". -- google,usb-port-id: Specifies the USB port ID to use. - -Example: - cros-ec@0 { - compatible = "google,cros-ec-i2c"; - - ... - - extcon { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <0>; - }; - } diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml new file mode 100644 index 000000000000..9c5849b341ea --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC USB Type-C cable and accessories detection + +maintainers: + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is + able to detect the state of external accessories such as display adapters + or USB devices when said accessories are attached or detached. + The node for this device must be under a cros-ec node like google,cros-ec-spi + or google,cros-ec-i2c. + +properties: + compatible: + const: google,extcon-usbc-cros-ec + + google,usb-port-id: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: the port id + minimum: 0 + maximum: 255 + +required: + - compatible + - google,usb-port-id + +additionalProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + usbc_extcon0: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + + usbc_extcon1: extcon1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 878a2079ebb6..1bd2870c3a9c 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -34,9 +34,12 @@ required: - compatible - reg +additionalProperties: false + examples: - | npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; }; +... diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 3f29ea04b5fe..354b448fc0c3 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -10,6 +10,7 @@ Required properties: * "qcom,scm-apq8064" * "qcom,scm-apq8084" * "qcom,scm-ipq4019" + * "qcom,scm-ipq806x" * "qcom,scm-msm8660" * "qcom,scm-msm8916" * "qcom,scm-msm8960" diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt index f547bd4549fe..d6dc9c0d8249 100644 --- a/Documentation/devicetree/bindings/gnss/gnss.txt +++ b/Documentation/devicetree/bindings/gnss/gnss.txt @@ -8,7 +8,7 @@ bus (e.g. UART, I2C or SPI). Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Documentation/devicetree/bindings/spi/spi-bus.txt Required properties: diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index 64e279a4bc10..5f1ed20e43ee 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -47,6 +47,8 @@ required: - "#gpio-cells" - gpio-controller +additionalProperties: false + dependencies: interrupt-controller: [ interrupts ] diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 2e097b57f170..0fc6700ed800 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -14,7 +14,7 @@ Required properties: "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K SoCs (either from AP or CP), see - Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt + Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt for specific details about the offset property. - reg: Address and length of the register set for the device. Only one diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt deleted file mode 100644 index f281f12dac18..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt +++ /dev/null @@ -1,51 +0,0 @@ -UniPhier GPIO controller - -Required properties: -- compatible: Should be "socionext,uniphier-gpio". -- reg: Specifies offset and length of the register set for the device. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be 2. The first cell is the pin number and the second - cell is used to specify optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be 2. The first cell defines the interrupt number. - The second cell bits[3:0] is used to specify trigger type as follows: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - Valid combinations are 1, 2, 3, 4, 8. -- ngpios: Specifies the number of GPIO lines. -- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt) -- socionext,interrupt-ranges: Specifies an interrupt number mapping between - this GPIO controller and its interrupt parent, in the form of arbitrary - number of <child-interrupt-base parent-interrupt-base length> triplets. - -Optional properties: -- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt) - -Example: - gpio: gpio@55000000 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000000 0x200>; - interrupt-parent = <&aidet>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 0 0>; - gpio-ranges-group-names = "gpio_range"; - ngpios = <248>; - socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; - }; - -Consumer Example: - - sdhci0_pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; - }; - -Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document. -Unfortunately, only the one's place is octal in the port numbering. (That is, -PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper -macro to calculate 29 * 8 + 4. diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml new file mode 100644 index 000000000000..c58ff9a94f45 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier GPIO controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + const: socionext,uniphier-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + description: | + The first cell defines the interrupt number. + The second cell bits[3:0] is used to specify trigger type as follows: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. + const: 2 + + ngpios: + minimum: 0 + maximum: 512 + + gpio-ranges: true + + gpio-ranges-group-names: + $ref: /schemas/types.yaml#/definitions/string-array + + socionext,interrupt-ranges: + description: | + Specifies an interrupt number mapping between this GPIO controller and + its interrupt parent, in the form of arbitrary number of + <child-interrupt-base parent-interrupt-base length> triplets. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + - ngpios + - gpio-ranges + - socionext,interrupt-ranges + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/gpio/uniphier-gpio.h> + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; + }; + + // Consumer: + // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC + // document. Unfortunately, only the one's place is octal in the port + // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.) + // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4. + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml index d102888c1be7..a36aec27069c 100644 --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml @@ -49,6 +49,8 @@ required: - "#gpio-cells" - gpio-controller +additionalProperties: false + examples: - | logicvc: logicvc@43c00000 { diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index e8b99adcb1bd..0b229a7d4a98 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -43,6 +43,9 @@ properties: operating-points-v2: true + resets: + maxItems: 2 + required: - compatible - reg @@ -50,6 +53,8 @@ required: - interrupt-names - clocks +additionalProperties: false + allOf: - if: properties: @@ -57,9 +62,6 @@ allOf: contains: const: amlogic,meson-g12a-mali then: - properties: - resets: - minItems: 2 required: - resets diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 8d966f3ff3db..0407e45eb8c4 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -75,6 +75,9 @@ properties: mali-supply: true + power-domains: + maxItems: 1 + resets: minItems: 1 maxItems: 2 @@ -91,6 +94,8 @@ required: - interrupt-names - clocks +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index afde81be3c29..f5401cc8de4a 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -115,6 +115,8 @@ required: - clocks - clock-names +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml index f4dfa6fc724c..665c6e3b31d3 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -36,6 +36,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | rotator@12810000 { diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml new file mode 100644 index 000000000000..0bc4b38d5cbb --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Vivante GPU Bindings + +description: Vivante GPU core devices + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +properties: + compatible: + const: vivante,gc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: AXI/master interface clock + - description: GPU core clock + - description: Shader clock (only required if GPU has feature PIPE_3D) + - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) + minItems: 1 + maxItems: 4 + + clock-names: + items: + enum: [ bus, core, shader, reg ] + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + gpu@130000 { + compatible = "vivante,gc"; + reg = <0x00130000 0x4000>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, + <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>; + clock-names = "bus", "core", "shader"; + power-domains = <&gpc 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml index 2a9822075b36..154bee851139 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 6a742a51e2f9..44a63fffb4be 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -87,6 +87,8 @@ required: - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml index 5d42e1304202..e8feee38c76c 100644 --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 168235ad5d81..3f043e943668 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -76,6 +76,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml new file mode 100644 index 000000000000..edbca2476128 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB BSC IIC Master Controller + +maintainers: + - Kamal Dasu <kdasu.kdev@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - brcm,bcm2711-hdmi-i2c + - brcm,brcmstb-i2c + - brcm,brcmper-i2c + + reg: + minItems: 1 + maxItems: 2 + items: + - description: BSC register range + - description: Auto-I2C register range + + reg-names: + items: + - const: bsc + - const: auto-i2c + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + clock-frequency: + enum: + - 46875 + - 50000 + - 93750 + - 97500 + - 187500 + - 200000 + - 375000 + - 390000 + +required: + - compatible + - reg + - clock-frequency + +unevaluatedProperties: false + +if: + properties: + compatible: + contains: + enum: + - brcm,bcm2711-hdmi-i2c + +then: + properties: + reg: + minItems: 2 + + required: + - reg-names + +else: + properties: + reg: + maxItems: 1 + +examples: + - | + bsca: i2c@f0406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&irq0_intc>; + reg = <0xf0406200 0x58>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; + }; + + - | + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <390000>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index d4bad86107b8..96c914e048f5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -28,8 +28,13 @@ Optional properties: "atmel,sama5d4-i2c", "atmel,sama5d2-i2c", "microchip,sam9x60-i2c". +- scl-gpios: specify the gpio related to SCL pin +- sda-gpios: specify the gpio related to SDA pin +- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state - Child nodes conforming to i2c bus binding + Examples : i2c0: i2c@fff84000 { @@ -64,6 +69,11 @@ i2c0: i2c@f8034600 { clocks = <&flx0>; atmel,fifo-size = <16>; i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; wm8731: wm8731@1a { compatible = "wm8731"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt deleted file mode 100644 index 0380609b177a..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt +++ /dev/null @@ -1,26 +0,0 @@ -Broadcom stb bsc iic master controller - -Required properties: - -- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c" -- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz - valid values are 375000, 390000, 187500, 200000 - 93750, 97500, 46875 and 50000 -- reg: specifies the base physical address and size of the registers - -Optional properties : - -- interrupts: specifies the interrupt number, the irq line to be used -- interrupt-names: Interrupt name string - -Example: - -bsca: i2c@f0406200 { - clock-frequency = <390000>; - compatible = "brcm,brcmstb-i2c"; - interrupt-parent = <&irq0_intc>; - reg = <0xf0406200 0x58>; - interrupts = <0x18>; - interrupt-names = "upg_bsca"; -}; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt deleted file mode 100644 index 22f2eeb2c4c9..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Rockchip RK3xxx I2C controller - -This driver interfaces with the native I2C controller present in Rockchip -RK3xxx SoCs. - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible: should be one of the following: - - "rockchip,rv1108-i2c": for rv1108 - - "rockchip,rk3066-i2c": for rk3066 - - "rockchip,rk3188-i2c": for rk3188 - - "rockchip,rk3228-i2c": for rk3228 - - "rockchip,rk3288-i2c": for rk3288 - - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328 - - "rockchip,rk3399-i2c": for rk3399 - - interrupts : interrupt number - - clocks: See ../clock/clock-bindings.txt - - For older hardware (rk3066, rk3188, rk3228, rk3288): - - There is one clock that's used both to derive the functional clock - for the device and as the bus clock. - - For newer hardware (rk3399): specified by name - - "i2c": This is used to derive the functional clock. - - "pclk": This is the bus clock. - -Required on RK3066, RK3188 : - - - rockchip,grf : the phandle of the syscon node for the general register - file (GRF) - - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF) - is also required. - -Optional properties : - - - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used. - - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise - (t(r) in I2C specification). If not specified this is assumed to be - the maximum the specification allows(1000 ns for Standard-mode, - 300 ns for Fast-mode) which might cause slightly slower communication. - - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall - (t(f) in the I2C specification). If not specified this is assumed to - be the maximum the specification allows (300 ns) which might cause - slightly slower communication. - - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall - (t(f) in the I2C specification). If not specified we'll use the SCL - value since they are the same in nearly all cases. - -Example: - -aliases { - i2c0 = &i2c0; -} - -i2c0: i2c@2002d000 { - compatible = "rockchip,rk3188-i2c"; - reg = <0x2002d000 0x1000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - rockchip,grf = <&grf>; - - clock-names = "i2c"; - clocks = <&cru PCLK_I2C0>; - - i2c-scl-rising-time-ns = <800>; - i2c-scl-falling-time-ns = <100>; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml new file mode 100644 index 000000000000..61eac76c84c4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3xxx I2C controller + +description: + This driver interfaces with the native I2C controller present in Rockchip + RK3xxx SoCs. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rv1108-i2c + - const: rockchip,rk3066-i2c + - const: rockchip,rk3188-i2c + - const: rockchip,rk3228-i2c + - const: rockchip,rk3288-i2c + - const: rockchip,rk3399-i2c + - items: + - enum: + - rockchip,rk3036-i2c + - rockchip,rk3368-i2c + - const: rockchip,rk3288-i2c + - items: + - enum: + - rockchip,px30-i2c + - rockchip,rk3308-i2c + - rockchip,rk3328-i2c + - const: rockchip,rk3399-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: + For older hardware (rk3066, rk3188, rk3228, rk3288) + there is one clock that is used both to derive the functional clock + for the device and as the bus clock. + For newer hardware (rk3399) this clock is used to derive + the functional clock + - description: + For newer hardware (rk3399) this is the bus clock + + clock-names: + minItems: 1 + items: + - const: i2c + - const: pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Required on RK3066, RK3188 the phandle of the syscon node for + the general register file (GRF) + On those SoCs an alias with the correct I2C bus ID + (bit offset in the GRF) is also required. + + clock-frequency: + default: 100000 + description: + SCL frequency to use (in Hz). If omitted, 100kHz is used. + + i2c-scl-rising-time-ns: + default: 1000 + description: + Number of nanoseconds the SCL signal takes to rise + (t(r) in I2C specification). If not specified this is assumed to be + the maximum the specification allows(1000 ns for Standard-mode, + 300 ns for Fast-mode) which might cause slightly slower communication. + + i2c-scl-falling-time-ns: + default: 300 + description: + Number of nanoseconds the SCL signal takes to fall + (t(f) in the I2C specification). If not specified this is assumed to + be the maximum the specification allows (300 ns) which might cause + slightly slower communication. + + i2c-sda-falling-time-ns: + default: 300 + description: + Number of nanoseconds the SDA signal takes to fall + (t(f) in the I2C specification). If not specified we will use the SCL + value since they are the same in nearly all cases. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - rockchip,rk3066-i2c + - rockchip,rk3188-i2c + +then: + required: + - rockchip,grf + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0: i2c@2002d000 { + compatible = "rockchip,rk3188-i2c"; + reg = <0x2002d000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_I2C0>; + clock-names = "i2c"; + rockchip,grf = <&grf>; + i2c-scl-falling-time-ns = <100>; + i2c-scl-rising-time-ns = <800>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt deleted file mode 100644 index 27fc6f8c798b..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt +++ /dev/null @@ -1,25 +0,0 @@ -UniPhier I2C controller (FIFO-builtin) - -Required properties: -- compatible: should be "socionext,uniphier-fi2c". -- #address-cells: should be 1. -- #size-cells: should be 0. -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -- clock-frequency: desired I2C bus frequency in Hz. The maximum supported - value is 400000. Defaults to 100000 if not specified. - -Examples: - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt deleted file mode 100644 index 26f9d95b3436..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt +++ /dev/null @@ -1,25 +0,0 @@ -UniPhier I2C controller (FIFO-less) - -Required properties: -- compatible: should be "socionext,uniphier-i2c". -- #address-cells: should be 1. -- #size-cells: should be 0. -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -- clock-frequency: desired I2C bus frequency in Hz. The maximum supported - value is 400000. Defaults to 100000 if not specified. - -Examples: - - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58400000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml new file mode 100644 index 000000000000..15abc022968e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier I2C controller (FIFO-builtin) + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,uniphier-fi2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + minimum: 100000 + maximum: 400000 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml new file mode 100644 index 000000000000..ef998def554e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier I2C controller (FIFO-less) + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,uniphier-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + minimum: 100000 + maximum: 400000 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index c602b6fe1c0c..d124eba1ce54 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -17,9 +17,13 @@ description: | properties: compatible: - enum: - - adi,adxl345 - - adi,adxl375 + oneOf: + - items: + - const: adi,adxl346 + - const: adi,adxl345 + - enum: + - adi,adxl345 + - adi,adxl375 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml index c1c6d6f223cf..8723a336229e 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -36,6 +36,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 84d25bd39488..d0913034b1d8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -106,7 +106,6 @@ examples: spi-cpha; clocks = <&ad7192_mclk>; clock-names = "mclk"; - #interrupt-cells = <2>; interrupts = <25 0x2>; interrupt-parent = <&gpio>; dvdd-supply = <&dvdd>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index 9acde6d2e2d9..a67ba67dab51 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -67,6 +67,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml index 91ab9c842273..77605f17901c 100644 --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml @@ -53,6 +53,8 @@ required: - dout-gpios - avdd-supply +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 59009997dca0..118809a03279 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -32,6 +32,8 @@ required: - vref-supply - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 0ce290473fb0..8ffeceb6abae 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -52,6 +52,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index acf36eef728b..b1627441a0b2 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -69,6 +69,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + patternProperties: "^filter@[0-9]+$": type: object diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml index 19e53930ebf6..1fe561574019 100644 --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml @@ -38,6 +38,8 @@ required: - compatible - vcc-supply +additionalProperties: false + examples: - | serial { diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml index 50a50a0d7070..a93d1972a5c2 100644 --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -24,6 +24,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml index a285eaba7125..e51a585bd5a3 100644 --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -34,6 +34,8 @@ required: - reg - vref-supply +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml index 69bd5c06319d..d7d14f2f1c20 100644 --- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml index 1cc60d7ecfa0..1a88b3c253d5 100644 --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml index cbb00be8f359..0ea278b07d1c 100644 --- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml @@ -38,6 +38,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml index 17e7f140b69b..fe7bfe1adbda 100644 --- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml @@ -29,6 +29,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml index aae8a6d627c9..f92bf7b2b7f0 100644 --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml @@ -30,6 +30,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml index e86ef64ecf03..7b92ba8cbb9f 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index ed2c3d5eadf5..e8f7d1ada57b 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -62,6 +62,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml index 0ff9b11f9d18..fb19a2d7a849 100644 --- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml @@ -45,6 +45,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index 9f5ca9c42025..64c18f1693f0 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -33,6 +33,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 519137e5c170..49257f9251e8 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -25,6 +25,9 @@ properties: - bosch,bmp280 - bosch,bme280 + reg: + maxItems: 1 + vddd-supply: description: digital voltage regulator (see regulator/regulator.txt) @@ -49,6 +52,8 @@ required: - vddd-supply - vdda-supply +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml index 8afbac24c34e..f86f8b23ef18 100644 --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml @@ -74,6 +74,8 @@ required: - trig-gpios - echo-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml index a079c9921af6..ada55f186f3c 100644 --- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml @@ -42,6 +42,8 @@ required: - compatible - ping-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index d4922f9f0376..8fb46de6641d 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -123,12 +123,11 @@ patternProperties: sign. allOf: - $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 items: - minItems: 3 - maxItems: 64 - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 "^diode@": type: object @@ -328,12 +327,11 @@ patternProperties: 78 and 79. allOf: - $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 items: - minItems: 3 - maxItems: 64 - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 adi,custom-steinhart: description: @@ -398,6 +396,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -463,16 +463,16 @@ examples: adi,sensor-type = <9>; //custom thermocouple adi,single-ended; adi,custom-thermocouple = /bits/ 64 - <(-50220000) 0 - (-30200000) 99100000 - (-5300000) 135400000 - 0 273150000 - 40200000 361200000 - 55300000 522100000 - 88300000 720300000 - 132200000 811200000 - 188700000 922500000 - 460400000 1000000000>; //10 pairs + <(-50220000) 0>, + <(-30200000) 99100000>, + <(-5300000) 135400000>, + <0 273150000>, + <40200000 361200000>, + <55300000 522100000>, + <88300000 720300000>, + <132200000 811200000>, + <188700000 922500000>, + <460400000 1000000000>; //10 pairs }; }; diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml index b98bf9363c8f..2384465eaa19 100644 --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -26,6 +26,8 @@ required: - compatible - enable-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml index 2f2e0b6ebbbd..3a2ad6ec64db 100644 --- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml +++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml @@ -33,3 +33,6 @@ properties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt deleted file mode 100644 index eb8e83736c02..000000000000 --- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectronics STPMIC1 Onkey - -Required properties: - -- compatible = "st,stpmic1-onkey"; -- interrupts: interrupt line to use -- interrupt-names = "onkey-falling", "onkey-rising" - onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic - onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic - -Optional properties: - -- st,onkey-clear-cc-flag: onkey is able power on after an - over-current shutdown event. -- st,onkey-pu-inactive: onkey pull up is not active -- power-off-time-sec: Duration in seconds which the key should be kept - pressed for device to power off automatically (from 1 to 16 seconds). - see See Documentation/devicetree/bindings/input/input.yaml - -Example: - -onkey { - compatible = "st,stpmic1-onkey"; - interrupt-parent = <&pmic>; - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; -}; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml new file mode 100644 index 000000000000..5971fc1df08d --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,bcm-voter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm BCM-Voter Interconnect + +maintainers: + - Georgi Djakov <georgi.djakov@linaro.org> + +description: | + The Bus Clock Manager (BCM) is a dedicated hardware accelerator that manages + shared system resources by aggregating requests from multiple Resource State + Coordinators (RSC). Interconnect providers are able to vote for aggregated + thresholds values from consumers by communicating through their respective + RSCs. + +properties: + compatible: + enum: + - qcom,bcm-voter + +required: + - compatible + +additionalProperties: false + +examples: + # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node + # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + - | + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + + # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node + # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + - | + + disp_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; +... diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml new file mode 100644 index 000000000000..91f70c9067d1 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,osm-l3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM. + The OSM L3 interconnect provider aggregates the L3 bandwidth requests + from CPU/GPU and relays it to the OSM. + +properties: + compatible: + enum: + - qcom,sc7180-osm-l3 + - qcom,sdm845-osm-l3 + + reg: + maxItems: 1 + + clocks: + items: + - description: xo clock + - description: alternate clock + + clock-names: + items: + - const: xo + - const: alternate + + '#interconnect-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#interconnect-cells' + +additionalProperties: false + +examples: + - | + + #define GPLL0 165 + #define RPMH_CXO_CLK 0 + + osm_l3: interconnect@17d41000 { + compatible = "qcom,sdm845-osm-l3"; + reg = <0x17d41000 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml new file mode 100644 index 000000000000..50f78f87f3fb --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 Network-On-Chip Interconnect + +maintainers: + - Odelu Kukatla <okukatla@codeaurora.org> + +description: | + SC7180 interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,sc7180-aggre1-noc + - qcom,sc7180-aggre2-noc + - qcom,sc7180-camnoc-virt + - qcom,sc7180-compute-noc + - qcom,sc7180-config-noc + - qcom,sc7180-dc-noc + - qcom,sc7180-gem-noc + - qcom,sc7180-ipa-virt + - qcom,sc7180-mc-virt + - qcom,sc7180-mmss-noc + - qcom,sc7180-npu-noc + - qcom,sc7180-qup-virt + - qcom,sc7180-system-noc + + '#interconnect-cells': + const: 1 + + qcom,bcm-voters: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandles to qcom,bcm-voter nodes that are required by + this interconnect to send RPMh commands. + + qcom,bcm-voter-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Names for each of the qcom,bcm-voters specified. + +required: + - compatible + - reg + - '#interconnect-cells' + - qcom,bcm-voters + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,sc7180.h> + + config_noc: interconnect@1500000 { + compatible = "qcom,sc7180-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sc7180-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sc7180-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt deleted file mode 100644 index 5c4f1d911630..000000000000 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt +++ /dev/null @@ -1,24 +0,0 @@ -Qualcomm SDM845 Network-On-Chip interconnect driver binding ------------------------------------------------------------ - -SDM845 interconnect providers support system bandwidth requirements through -RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is -able to communicate with the BCM through the Resource State Coordinator (RSC) -associated with each execution environment. Provider nodes must reside within -an RPMh device node pertaining to their RSC and each provider maps to a single -RPMh resource. - -Required properties : -- compatible : shall contain only one of the following: - "qcom,sdm845-rsc-hlos" -- #interconnect-cells : should contain 1 - -Examples: - -apps_rsc: rsc { - rsc_hlos: interconnect { - compatible = "qcom,sdm845-rsc-hlos"; - #interconnect-cells = <1>; - }; -}; - diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml new file mode 100644 index 000000000000..8b087e0b0b81 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 Network-On-Chip Interconnect + +maintainers: + - Georgi Djakov <georgi.djakov@linaro.org> + +description: | + SDM845 interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,sdm845-aggre1-noc + - qcom,sdm845-aggre2-noc + - qcom,sdm845-config-noc + - qcom,sdm845-dc-noc + - qcom,sdm845-gladiator-noc + - qcom,sdm845-mem-noc + - qcom,sdm845-mmss-noc + - qcom,sdm845-system-noc + + '#interconnect-cells': + const: 1 + + qcom,bcm-voters: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandles to qcom,bcm-voter nodes that are required by + this interconnect to send RPMh commands. + + qcom,bcm-voter-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Names for each of the qcom,bcm-voters specified. + +required: + - compatible + - reg + - '#interconnect-cells' + - qcom,bcm-voters + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,sdm845.h> + + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm845-mem-noc"; + reg = <0 0x01380000 0 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm845-mmss-noc"; + reg = <0 0x01740000 0 0x1c1000>; + #interconnect-cells = <1>; + qcom,bcm-voter-names = "apps", "disp"; + qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index 507c141ea760..ccc507f384d2 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -44,6 +44,8 @@ required: - interrupt-controller - '#interrupt-cells' +additionalProperties: false + examples: - | intcon: interrupt-controller@c8003000 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt index c60c034dcf19..c20b51df7138 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt @@ -98,7 +98,7 @@ Example }; msi_c: msi-controller@c { - reg = <0xb 0xf00>; + reg = <0xc 0xf00>; compatible = "vendor-b,another-controller"; msi-controller; /* Each device has some unique ID */ diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt deleted file mode 100644 index 48e71d3ac2ad..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt +++ /dev/null @@ -1,32 +0,0 @@ -UniPhier AIDET - -UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic -Interrupt Controller). GIC itself can handle only high level and rising edge -interrupts. The AIDET provides logic inverter to support low level and falling -edge interrupts. - -Required properties: -- compatible: Should be one of the following: - "socionext,uniphier-ld4-aidet" - for LD4 SoC - "socionext,uniphier-pro4-aidet" - for Pro4 SoC - "socionext,uniphier-sld8-aidet" - for sLD8 SoC - "socionext,uniphier-pro5-aidet" - for Pro5 SoC - "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC - "socionext,uniphier-ld11-aidet" - for LD11 SoC - "socionext,uniphier-ld20-aidet" - for LD20 SoC - "socionext,uniphier-pxs3-aidet" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an interrupt - source. The value should be 2. The first cell defines the interrupt number - (corresponds to the SPI interrupt number of GIC). The second cell specifies - the trigger type as defined in interrupts.txt in this directory. - -Example: - - aidet: aidet@5fc20000 { - compatible = "socionext,uniphier-pro4-aidet"; - reg = <0x5fc20000 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml new file mode 100644 index 000000000000..f89ebde76dab --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier AIDET + +description: | + UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC + (Generic Interrupt Controller). GIC itself can handle only high level and + rising edge interrupts. The AIDET provides logic inverter to support low + level and falling edge interrupts. + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-ld4-aidet + - socionext,uniphier-pro4-aidet + - socionext,uniphier-sld8-aidet + - socionext,uniphier-pro5-aidet + - socionext,uniphier-pxs2-aidet + - socionext,uniphier-ld6b-aidet + - socionext,uniphier-ld11-aidet + - socionext,uniphier-ld20-aidet + - socionext,uniphier-pxs3-aidet + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: | + The first cell defines the interrupt number (corresponds to the SPI + interrupt number of GIC). The second cell specifies the trigger type as + defined in interrupts.txt in this directory. + const: 2 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml index 7cdd3aaa2ba4..0e33cd9e010e 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml @@ -80,6 +80,8 @@ required: - clock-names - "#iommu-cells" +additionalProperties: false + examples: - | #include <dt-bindings/clock/exynos5250.h> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index c60b994fe116..4c270fde4567 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -167,13 +167,13 @@ examples: led-controller { compatible = "gpio-leds"; - led0 { + led-0 { function = LED_FUNCTION_STATUS; linux,default-trigger = "heartbeat"; gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; - led1 { + led-1 { function = LED_FUNCTION_USB; gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>; diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml index 8c43f1e1bf7d..c6f96cabd4d1 100644 --- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml +++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml @@ -49,3 +49,6 @@ required: - compatible - "#address-cells" - "#size-cells" +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index b50f4bcc98f1..90edf9d33b33 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -50,3 +50,6 @@ patternProperties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml new file mode 100644 index 000000000000..75d5d97305e1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner sunxi Message Box + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: | + The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a + two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt + is raised for received messages, but software must poll to know when a + transmitted message has been acknowledged by the remote user. Each FIFO can + hold four 32-bit messages; when a FIFO is full, clients must wait before + attempting more transmissions. + + Refer to ./mailbox.txt for generic information about mailbox device-tree + bindings. + +properties: + compatible: + oneOf: + - items: + - enum: + - allwinner,sun8i-a83t-msgbox + - allwinner,sun8i-h3-msgbox + - allwinner,sun9i-a80-msgbox + - allwinner,sun50i-a64-msgbox + - allwinner,sun50i-h6-msgbox + - const: allwinner,sun6i-a31-msgbox + - const: allwinner,sun6i-a31-msgbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: bus clock + + resets: + maxItems: 1 + description: bus reset + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + description: first cell is the channel number (0-7) + +required: + - compatible + - reg + - clocks + - resets + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml index 319280563648..aa2b3bf56b57 100644 --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -41,6 +41,8 @@ required: - interrupts - "#mbox-cells" +additionalProperties: false + examples: - | mailbox@c883c404 { diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt index 9c43357c5924..31486c9f6443 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt @@ -23,6 +23,8 @@ Required properties: be included together with SoC specific compatible. There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu" compatible to support it. + To communicate with i.MX8 SCU, "fsl,imx8-mu-scu" could be + used for fast IPC - reg : Should contain the registers location and length - interrupts : Interrupt number. The interrupt specifier format depends on the interrupt controller parent. diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt index 7b13787ab13d..0b5b2a6bcc48 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt @@ -14,13 +14,11 @@ Required properties: - interrupts: The interrupt signal from the GCE block - clock: Clocks according to the common clock binding - clock-names: Must be "gce" to stand for GCE clock -- #mbox-cells: Should be 3. - <&phandle channel priority atomic_exec> +- #mbox-cells: Should be 2. + <&phandle channel priority> phandle: Label name of a gce node. channel: Channel of mailbox. Be equal to the thread id of GCE. priority: Priority of GCE thread. - atomic_exec: GCE processing continuous packets of commands in atomic - way. Required properties for a client device: - mboxes: Client use mailbox to communicate with GCE, it should have this @@ -54,8 +52,8 @@ Example for a client device: mmsys: clock-controller@14000000 { compatible = "mediatek,mt8173-mmsys"; - mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, - <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>, + <&gce 1 CMDQ_THR_PRIO_LOWEST>; mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF CMDQ_EVENT_MUTEX1_STREAM_EOF>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 335717e15970..37d77e065491 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -124,6 +124,8 @@ required: - amlogic,ao-sysctrl - amlogic,canvas +additionalProperties: false + examples: - | vdec: video-decoder@c8820000 { diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index 41197578f19a..95ffa8bc0533 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -24,6 +24,12 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + interrupts: maxItems: 1 @@ -47,7 +53,6 @@ allOf: - description: AO-CEC clock clock-names: - maxItems: 1 items: - const: core @@ -66,7 +71,6 @@ allOf: - description: AO-CEC clock generator source clock-names: - maxItems: 1 items: - const: oscin @@ -78,6 +82,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | cec_AO: cec@100 { @@ -88,4 +94,3 @@ examples: clock-names = "core"; hdmi-phandle = <&hdmi_tx>; }; - diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml index 8e9251a0f9ef..fcb5f13704a5 100644 --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml @@ -59,6 +59,8 @@ required: - interrupts - port +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt deleted file mode 100644 index 5eefd62ac5c5..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,vin.txt +++ /dev/null @@ -1,217 +0,0 @@ -Renesas R-Car Video Input driver (rcar_vin) -------------------------------------------- - -The rcar_vin device provides video input capabilities for the Renesas R-Car -family of devices. - -Each VIN instance has a single parallel input that supports RGB and YUV video, -with both external synchronization and BT.656 synchronization for the latter. -Depending on the instance the VIN input is connected to external SoC pins, or -on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - - - compatible: Must be one or more of the following - - "renesas,vin-r8a7743" for the R8A7743 device - - "renesas,vin-r8a7744" for the R8A7744 device - - "renesas,vin-r8a7745" for the R8A7745 device - - "renesas,vin-r8a77470" for the R8A77470 device - - "renesas,vin-r8a774a1" for the R8A774A1 device - - "renesas,vin-r8a774b1" for the R8A774B1 device - - "renesas,vin-r8a774c0" for the R8A774C0 device - - "renesas,vin-r8a7778" for the R8A7778 device - - "renesas,vin-r8a7779" for the R8A7779 device - - "renesas,vin-r8a7790" for the R8A7790 device - - "renesas,vin-r8a7791" for the R8A7791 device - - "renesas,vin-r8a7792" for the R8A7792 device - - "renesas,vin-r8a7793" for the R8A7793 device - - "renesas,vin-r8a7794" for the R8A7794 device - - "renesas,vin-r8a7795" for the R8A7795 device - - "renesas,vin-r8a7796" for the R8A7796 device - - "renesas,vin-r8a77965" for the R8A77965 device - - "renesas,vin-r8a77970" for the R8A77970 device - - "renesas,vin-r8a77980" for the R8A77980 device - - "renesas,vin-r8a77990" for the R8A77990 device - - "renesas,vin-r8a77995" for the R8A77995 device - - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible - device. - - When compatible with the generic version nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - - - reg: the register base and size for the device registers - - interrupts: the interrupt for the device - - clocks: Reference to the parent clock - -The per-board settings for Gen2 and RZ/G1 platforms: - -- port - sub-node describing a single endpoint connected to the VIN - from external SoC pins as described in video-interfaces.txt[1]. - Only the first one will be considered as each vin interface has one - input port. - - - Optional properties for endpoint nodes: - - hsync-active: see [1] for description. Default is active high. - - vsync-active: see [1] for description. Default is active high. - If both HSYNC and VSYNC polarities are not specified, embedded - synchronization is selected. - - field-active-even: see [1] for description. Default is active high. - - bus-width: see [1] for description. The selected bus width depends on - the SoC type and selected input image format. - Valid values are: 8, 10, 12, 16, 24 and 32. - - data-shift: see [1] for description. Valid values are 0 and 8. - - data-enable-active: polarity of CLKENB signal, see [1] for - description. Default is active high. - -The per-board settings for Gen3 and RZ/G2 platforms: - -Gen3 and RZ/G2 platforms can support both a single connected parallel input -source from external SoC pins (port@0) and/or multiple parallel input sources -from local SoC CSI-2 receivers (port@1) depending on SoC. - -- renesas,id - ID number of the VIN, VINx in the documentation. -- ports - - port@0 - sub-node describing a single endpoint connected to the VIN - from external SoC pins as described in video-interfaces.txt[1]. - Describing more than one endpoint in port@0 is invalid. Only VIN - instances that are connected to external pins should have port@0. - - Endpoint nodes of port@0 support the optional properties listed in - the Gen2 per-board settings description. - - - port@1 - sub-nodes describing one or more endpoints connected to - the VIN from local SoC CSI-2 receivers. The endpoint numbers must - use the following schema. - - - endpoint@0 - sub-node describing the endpoint connected to CSI20 - - endpoint@1 - sub-node describing the endpoint connected to CSI21 - - endpoint@2 - sub-node describing the endpoint connected to CSI40 - - endpoint@3 - sub-node describing the endpoint connected to CSI41 - - Endpoint nodes of port@1 do not support any optional endpoint property. - -Device node example for Gen2 platforms --------------------------------------- - - aliases { - vin0 = &vin0; - }; - - vin0: vin@e6ef0000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - -Board setup example for Gen2 platforms (vin1 composite video input) -------------------------------------------------------------------- - -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin1>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep0>; - }; - }; - }; -}; - -/* composite video input */ -&vin1 { - pinctrl-0 = <&vin1_pins>; - pinctrl-names = "default"; - - status = "okay"; - - port { - vin1ep0: endpoint { - remote-endpoint = <&adv7180>; - bus-width = <8>; - }; - }; -}; - -Device node example for Gen3 platforms --------------------------------------- - - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7795"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 811>; - renesas,id = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - vin0csi20: endpoint@0 { - reg = <0>; - remote-endpoint= <&csi20vin0>; - }; - vin0csi21: endpoint@1 { - reg = <1>; - remote-endpoint= <&csi21vin0>; - }; - vin0csi40: endpoint@2 { - reg = <2>; - remote-endpoint= <&csi40vin0>; - }; - }; - }; - }; - - csi20: csi2@fea80000 { - compatible = "renesas,r8a7795-csi2"; - reg = <0 0xfea80000 0 0x10000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 714>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 714>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - csi20_in: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&adv7482_txb>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - csi20vin0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vin0csi20>; - }; - }; - }; - }; - -[1] video-interfaces.txt common video media interface diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml new file mode 100644 index 000000000000..1ec947b4781f --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -0,0 +1,402 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,vin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Video Input (VIN) + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The R-Car Video Input (VIN) device provides video input capabilities for the + Renesas R-Car family of devices. + + Each VIN instance has a single parallel input that supports RGB and YUV video, + with both external synchronization and BT.656 synchronization for the latter. + Depending on the instance the VIN input is connected to external SoC pins, or + on Gen3 and RZ/G2 platforms to a CSI-2 receiver. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,vin-r8a7743 # RZ/G1M + - renesas,vin-r8a7744 # RZ/G1N + - renesas,vin-r8a7745 # RZ/G1E + - renesas,vin-r8a77470 # RZ/G1C + - renesas,vin-r8a7790 # R-Car H2 + - renesas,vin-r8a7791 # R-Car M2-W + - renesas,vin-r8a7792 # R-Car V2H + - renesas,vin-r8a7793 # R-Car M2-N + - renesas,vin-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1 + + - items: + - enum: + - renesas,vin-r8a774a1 # RZ/G2M + - renesas,vin-r8a774b1 # RZ/G2N + - renesas,vin-r8a774c0 # RZ/G2E + - renesas,vin-r8a7778 # R-Car M1 + - renesas,vin-r8a7779 # R-Car H1 + - renesas,vin-r8a7795 # R-Car H3 + - renesas,vin-r8a7796 # R-Car M3-W + - renesas,vin-r8a77965 # R-Car M3-N + - renesas,vin-r8a77970 # R-Car V3M + - renesas,vin-r8a77980 # R-Car V3H + - renesas,vin-r8a77990 # R-Car E3 + - renesas,vin-r8a77995 # R-Car D3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + #The per-board settings for Gen2 and RZ/G1 platforms: + port: + type: object + description: + A node containing a parallel input with a single endpoint definitions as + documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + endpoint: + type: object + + properties: + hsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + vsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + field-active-even: true + + bus-width: true + + data-shift: true + + data-enable-active: + description: Polarity of CLKENB signal + default: 1 + + pclk-sample: true + + data-active: true + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + #The per-board settings for Gen3 and RZ/G2 platforms: + renesas,id: + description: VIN channel number + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 15 + + ports: + type: object + description: + A node containing input nodes with endpoint definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + port@0: + type: object + description: + Input port node, single endpoint describing a parallel input source. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + hsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + vsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + field-active-even: true + + bus-width: true + + data-shift: true + + data-enable-active: + description: Polarity of CLKENB signal + default: 1 + + pclk-sample: true + + data-active: true + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + required: + - endpoint + + additionalProperties: false + + port@1: + type: object + description: + Input port node, multiple endpoints describing all the R-Car CSI-2 + modules connected the VIN. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 1 + + endpoint@0: + type: object + description: Endpoint connected to CSI20. + + properties: + reg: + const: 0 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@1: + type: object + description: Endpoint connected to CSI21. + + properties: + reg: + const: 1 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@2: + type: object + description: Endpoint connected to CSI40. + + properties: + reg: + const: 2 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@3: + type: object + description: Endpoint connected to CSI41. + + properties: + reg: + const: 3 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + anyOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +if: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + - renesas,rcar-gen2-vin +then: + required: + - port +else: + required: + - renesas,id + - ports + +additionalProperties: false + +examples: + # Device node example for Gen2 platform + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + vin1: vin@e6ef1000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 810>; + + port { + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; + }; + + # Device node example for Gen3 platform with only CSI-2 + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7795"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + # Device node example for Gen3 platform with CSI-2 and parallel + - | + #include <dt-bindings/clock/r8a77970-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a77970-sysc.h> + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a77970"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vin2_in: endpoint { + remote-endpoint = <&adv7612_out>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index 480385789394..b0a0f0d3d9d4 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -73,6 +73,8 @@ required: - gpio-controller - "#gpio-cells" +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 4fbb9e734284..3a6a1a26e2b3 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -41,6 +41,9 @@ properties: "#clock-cells": const: 0 + clock-output-names: + const: bd71828-32k-out + rohm,charger-sense-resistor-ohms: minimum: 10000000 maximum: 50000000 @@ -74,6 +77,8 @@ required: - gpio-controller - "#gpio-cells" +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt deleted file mode 100644 index afd45c089585..000000000000 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt +++ /dev/null @@ -1,61 +0,0 @@ -* STMicroelectronics STPMIC1 Power Management IC - -Required properties: -- compatible: : "st,stpmic1" -- reg: : The I2C slave address for the STPMIC1 chip. -- interrupts: : The interrupt line the device is connected to. -- #interrupt-cells: : Should be 1. -- interrupt-controller: : Marks the device node as an interrupt controller. - Interrupt numbers are defined at - dt-bindings/mfd/st,stpmic1.h. - -STPMIC1 consists in a varied group of sub-devices. -Each sub-device binding is be described in own documentation file. - -Device Description ------- ------------ -st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt -st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt -st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt - -Example: - -#include <dt-bindings/mfd/st,stpmic1.h> - -pmic: pmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupt-parent = <&gpioa>; - interrupts = <0 2>; - - interrupt-controller; - #interrupt-cells = <2>; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - }; - - regulators { - compatible = "st,stpmic1-regulators"; - - vdd_core: buck1 { - regulator-name = "vdd_core"; - regulator-boot-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1200000>; - }; - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-pull-down; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml new file mode 100644 index 000000000000..d9ad9260e348 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -0,0 +1,339 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics STPMIC1 Power Management IC bindings + +description: STMicroelectronics STPMIC1 Power Management IC + +maintainers: + - pascal Paillet <p.paillet@st.com> + +properties: + compatible: + const: st,stpmic1 + + reg: + const: 0x33 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + onkey: + type: object + + allOf: + - $ref: ../input/input.yaml + + properties: + compatible: + const: st,stpmic1-onkey + + interrupts: + items: + - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic + - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic + + interrupt-names: + items: + - const: onkey-falling + - const: onkey-rising + + st,onkey-clear-cc-flag: + description: onkey is able power on after an over-current shutdown event. + $ref: /schemas/types.yaml#/definitions/flag + + st,onkey-pu-inactive: + description: onkey pull up is not active + $ref: /schemas/types.yaml#/definitions/flag + + power-off-time-sec: + minimum: 1 + maximum: 16 + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + watchdog: + type: object + + allOf: + - $ref: ../watchdog/watchdog.yaml + + properties: + compatible: + const: st,stpmic1-wdt + + timeout-sec: true + + required: + - compatible + + additionalProperties: false + + regulators: + type: object + + description: | + Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + Switches are fixed voltage regulators with only enable/disable capability. + + properties: + compatible: + const: st,stpmic1-regulators + + ldo3: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-over-current-protection: true + + additionalProperties: false + + ldo4: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + vref_ddr: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + + additionalProperties: false + + boost: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + patternProperties: + "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + description: STPMIC1 voltage regulators supplies + + "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": + allOf: + - $ref: ../regulator/regulator.yaml + + "^ldo[1-2,5-6]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^buck[1-4]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-initial-mode: true + regulator-pull-down: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^pwr_sw[1-2]$": + type: object + + properties: + interrupts: + maxItems: 1 + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + regulator-active-discharge: true + + additionalProperties: false + + required: + - compatible + + additionalProperties: false + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include <dt-bindings/mfd/st,stpmic1.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + buck1 { + regulator-name = "vdd_core"; + interrupts = <IT_CURLIM_BUCK1 0>; + st,mask-reset; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + + buck4 { + regulator-name = "v3v3"; + interrupts = <IT_CURLIM_BUCK4 0>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 0ea21a6f70b4..38ab0499102d 100644 --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -38,6 +38,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml new file mode 100644 index 000000000000..2f45dd0d04db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + - Piotr Sroka <piotrs@cadence.com> + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + items: + - enum: + - socionext,uniphier-sd4hc + - const: cdns,sd4hc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + # PHY DLL input delays: + # They are used to delay the data valid window, and align the window to + # sampling clock. The delay starts from 5ns (for delay parameter equal to 0) + # and it is increased by 2.5ns in each step. + + cdns,phy-input-delay-sd-highspeed: + description: Value of the delay in the input path for SD high-speed timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-legacy: + description: Value of the delay in the input path for legacy timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr12: + description: Value of the delay in the input path for SD UHS SDR12 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr25: + description: Value of the delay in the input path for SD UHS SDR25 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr50: + description: Value of the delay in the input path for SD UHS SDR50 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-ddr50: + description: Value of the delay in the input path for SD UHS DDR50 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-mmc-highspeed: + description: Value of the delay in the input path for MMC high-speed timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-mmc-ddr: + description: Value of the delay in the input path for eMMC high-speed DDR timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + # PHY DLL clock delays: + # Each delay property represents the fraction of the clock period. + # The approximate delay value will be + # (<delay property value>/128)*sdmclk_clock_period. + + cdns,phy-dll-delay-sdclk: + description: | + Value of the delay introduced on the sdclk output for all modes except + HS200, HS400 and HS400_ES. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + + cdns,phy-dll-delay-sdclk-hsmmc: + description: | + Value of the delay introduced on the sdclk output for HS200, HS400 and + HS400_ES speed modes. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + + cdns,phy-dll-delay-strobe: + description: | + Value of the delay introduced on the dat_strobe input used in + HS400 / HS400_ES speed modes. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + emmc: mmc@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cdns,phy-dll-delay-sdclk = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt deleted file mode 100644 index fa423c277853..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt +++ /dev/null @@ -1,80 +0,0 @@ -* Cadence SD/SDIO/eMMC Host Controller - -Required properties: -- compatible: should be one of the following: - "cdns,sd4hc" - default of the IP - "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -For eMMC configuration, supported speed modes are not indicated by the SDHCI -Capabilities Register. Instead, the following properties should be specified -if supported. See mmc.txt for details. -- mmc-ddr-1_8v -- mmc-ddr-1_2v -- mmc-hs200-1_8v -- mmc-hs200-1_2v -- mmc-hs400-1_8v -- mmc-hs400-1_2v - -Some PHY delays can be configured by following properties. -PHY DLL input delays: -They are used to delay the data valid window, and align the window -to sampling clock. The delay starts from 5ns (for delay parameter equal to 0) -and it is increased by 2.5ns in each step. -- cdns,phy-input-delay-sd-highspeed: - Value of the delay in the input path for SD high-speed timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-legacy: - Value of the delay in the input path for legacy timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr12: - Value of the delay in the input path for SD UHS SDR12 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr25: - Value of the delay in the input path for SD UHS SDR25 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr50: - Value of the delay in the input path for SD UHS SDR50 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-ddr50: - Value of the delay in the input path for SD UHS DDR50 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-mmc-highspeed: - Value of the delay in the input path for MMC high-speed timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-mmc-ddr: - Value of the delay in the input path for eMMC high-speed DDR timing - Valid range = [0:0x1F]. - -PHY DLL clock delays: -Each delay property represents the fraction of the clock period. -The approximate delay value will be -(<delay property value>/128)*sdmclk_clock_period. -- cdns,phy-dll-delay-sdclk: - Value of the delay introduced on the sdclk output - for all modes except HS200, HS400 and HS400_ES. - Valid range = [0:0x7F]. -- cdns,phy-dll-delay-sdclk-hsmmc: - Value of the delay introduced on the sdclk output - for HS200, HS400 and HS400_ES speed modes. - Valid range = [0:0x7F]. -- cdns,phy-dll-delay-strobe: - Value of the delay introduced on the dat_strobe input - used in HS400 / HS400_ES speed modes. - Valid range = [0:0x7F]. - -Example: - emmc: sdhci@5a000000 { - compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; - reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; - clocks = <&clk 4>; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cdns,phy-dll-delay-sdclk = <0>; - }; diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml new file mode 100644 index 000000000000..cdfac9b4411b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier SD/SDIO/eMMC controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + description: version 2.91, 3.1, 3.1.1, respectively + enum: + - socionext,uniphier-sd-v2.91 + - socionext,uniphier-sd-v3.1 + - socionext,uniphier-sd-v3.1.1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-names: + description: | + There are three reset signals at maximum + host: mandatory for all variants + bridge: exist only for version 2.91 + hw: optional. exist if eMMC hw reset line is available + oneOf: + - const: host + - items: + - const: host + - const: bridge + - items: + - const: host + - const: hw + - items: + - const: host + - const: bridge + - const: hw + + resets: + minItems: 1 + maxItems: 3 + +allOf: + - $ref: mmc-controller.yaml + + - if: + properties: + compatible: + contains: + const: socionext,uniphier-sd-v2.91 + then: + properties: + reset-names: + contains: + const: bridge + else: + properties: + reset-names: + not: + contains: + const: bridge + +required: + - compatible + - reg + - interrupts + - clocks + - reset-names + - resets + +examples: + - | + sd: mmc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; diff --git a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt deleted file mode 100644 index e1d658755722..000000000000 --- a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt +++ /dev/null @@ -1,55 +0,0 @@ -UniPhier SD/eMMC controller - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-sd-v2.91" - IP version 2.91 - "socionext,uniphier-sd-v3.1" - IP version 3.1 - "socionext,uniphier-sd-v3.1.1" - IP version 3.1.1 -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: a single clock specifier of the controller clock. -- reset-names: should contain the following: - "host" - mandatory for all versions - "bridge" - should exist only for "socionext,uniphier-sd-v2.91" - "hw" - should exist if eMMC hw reset line is available -- resets: a list of reset specifiers, corresponding to the reset-names - -Optional properties: -- pinctrl-names: if present, should contain the following: - "default" - should exist for all instances - "uhs" - should exist for SD instance with UHS support -- pinctrl-0: pin control state for the default mode -- pinctrl-1: pin control state for the UHS mode -- dma-names: should be "rx-tx" if present. - This property can exist only for "socionext,uniphier-sd-v2.91". -- dmas: a single DMA channel specifier - This property can exist only for "socionext,uniphier-sd-v2.91". -- bus-width: see mmc.txt -- cap-sd-highspeed: see mmc.txt -- cap-mmc-highspeed: see mmc.txt -- sd-uhs-sdr12: see mmc.txt -- sd-uhs-sdr25: see mmc.txt -- sd-uhs-sdr50: see mmc.txt -- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt -- non-removable: see mmc.txt - -Example: - - sd: sdhc@5a400000 { - compatible = "socionext,uniphier-sd-v2.91"; - reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; - pinctrl-names = "default", "uhs"; - pinctrl-0 = <&pinctrl_sd>; - pinctrl-1 = <&pinctrl_sd_uhs>; - clocks = <&mio_clk 0>; - reset-names = "host", "bridge"; - resets = <&mio_rst 0>, <&mio_rst 3>; - dma-names = "rx-tx"; - dmas = <&dmac 4>; - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - }; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index 82156dc8f304..05651a654c66 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -35,11 +35,11 @@ Required properties: (optional) NAND flash cache range (if at non-standard offset) - reg-names : a list of the names corresponding to the previous register ranges. Should contain "nand" and (optionally) - "flash-dma" and/or "nand-cache". -- interrupts : The NAND CTLRDY interrupt and (if Flash DMA is available) - FLASH_DMA_DONE -- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done", if broken out as - individual interrupts. + "flash-dma" or "flash-edu" and/or "nand-cache". +- interrupts : The NAND CTLRDY interrupt, (if Flash DMA is available) + FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE +- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done", + if broken out as individual interrupts. May be "nand", if the SoC has the individual NAND interrupts multiplexed behind another custom piece of hardware diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml new file mode 100644 index 000000000000..46e6b6726bc0 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/denali,nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Denali NAND controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + enum: + - altr,socfpga-denali-nand + - socionext,uniphier-denali-nand-v5a + - socionext,uniphier-denali-nand-v5b + + reg-names: + description: | + There are two register regions: + nand_data: host data/command interface + denali_reg: register interface + items: + - const: nand_data + - const: denali_reg + + reg: + minItems: 2 + maxItems: 2 + + interrupts: + maxItems: 1 + + clock-names: + description: | + There are three clocks: + nand: controller core clock + nand_x: bus interface clock + ecc: ECC circuit clock + items: + - const: nand + - const: nand_x + - const: ecc + + clocks: + minItems: 3 + maxItems: 3 + + reset-names: + description: | + There are two optional resets: + nand: controller core reset + reg: register reset + oneOf: + - items: + - const: nand + - const: reg + - const: nand + - const: reg + + resets: + minItems: 1 + maxItems: 2 + +allOf: + - $ref: nand-controller.yaml + + - if: + properties: + compatible: + contains: + const: altr,socfpga-denali-nand + then: + patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-ecc-strength: + enum: + - 8 + - 15 + nand-ecc-step-size: + enum: + - 512 + + - if: + properties: + compatible: + contains: + const: socionext,uniphier-denali-nand-v5a + then: + patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-ecc-strength: + enum: + - 8 + - 16 + - 24 + nand-ecc-step-size: + enum: + - 1024 + + - if: + properties: + compatible: + contains: + const: socionext,uniphier-denali-nand-v5b + then: + patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-ecc-strength: + enum: + - 8 + - 16 + nand-ecc-step-size: + enum: + - 1024 + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +examples: + - | + nand-controller@ff900000 { + compatible = "altr,socfpga-denali-nand"; + reg-names = "nand_data", "denali_reg"; + reg = <0xff900000 0x20>, <0xffb80000 0x1000>; + interrupts = <0 144 4>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; + reset-names = "nand", "reg"; + resets = <&nand_rst>, <&nand_reg_rst>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt deleted file mode 100644 index 98916a84bbf6..000000000000 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Denali NAND controller - -Required properties: - - compatible : should be one of the following: - "altr,socfpga-denali-nand" - for Altera SOCFPGA - "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) - "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - - reg : should contain registers location and length for data and reg. - - reg-names: Should contain the reg names "nand_data" and "denali_reg" - - #address-cells: should be 1. The cell encodes the chip select connection. - - #size-cells : should be 0. - - interrupts : The interrupt number. - - clocks: should contain phandle of the controller core clock, the bus - interface clock, and the ECC circuit clock. - - clock-names: should contain "nand", "nand_x", "ecc" - -Optional properties: - - resets: may contain phandles to the controller core reset, the register - reset - - reset-names: may contain "nand", "reg" - -Sub-nodes: - Sub-nodes represent available NAND chips. - - Required properties: - - reg: should contain the bank ID of the controller to which each chip - select is connected. - - Optional properties: - - nand-ecc-step-size: see nand-controller.yaml for details. - If present, the value must be - 512 for "altr,socfpga-denali-nand" - 1024 for "socionext,uniphier-denali-nand-v5a" - 1024 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-strength: see nand-controller.yaml for details. Valid values are: - 8, 15 for "altr,socfpga-denali-nand" - 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" - 8, 16 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-maximize: see nand-controller.yaml for details - -The chip nodes may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. - -Examples: - -nand: nand@ff900000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "altr,socfpga-denali-nand"; - reg = <0xff900000 0x20>, <0xffb80000 0x1000>; - reg-names = "nand_data", "denali_reg"; - clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; - clock-names = "nand", "nand_x", "ecc"; - resets = <&nand_rst>, <&nand_reg_rst>; - reset-names = "nand", "reg"; - interrupts = <0 144 4>; - - nand@0 { - reg = <0>; - } -}; diff --git a/Documentation/devicetree/bindings/mtd/nand-macronix.txt b/Documentation/devicetree/bindings/mtd/nand-macronix.txt new file mode 100644 index 000000000000..ffab28a2c4d1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/nand-macronix.txt @@ -0,0 +1,27 @@ +Macronix NANDs Device Tree Bindings +----------------------------------- + +Macronix NANDs support randomizer operation for scrambling user data, +which can be enabled with a SET_FEATURE. The penalty when using the +randomizer are subpage accesses prohibited and more time period needed +for program operation, i.e., tPROG 300us to 340us (randomizer enabled). +Enabling the randomizer is a one time persistent and non reversible +operation. + +For more high-reliability concern, if subpage write is not available +with hardware ECC and not enabled at UBI level, then enabling the +randomizer is recommended by default by adding a new specific property +in children nodes. + +Required NAND chip properties in children mode: +- randomizer enable: should be "mxic,enable-randomizer-otp" + +Example: + + nand: nand-controller@unit-address { + + nand@0 { + reg = <0>; + mxic,enable-randomizer-otp; + }; + }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index dd258674633c..a7d57ba5f2ac 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -20,7 +20,7 @@ Required properties: Optional properties: - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - shutdown-gpios: GPIO specifier, used to enable the BT module - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml new file mode 100644 index 000000000000..cccf8202c8f7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch MCAN controller Bindings + +description: Bosch MCAN controller for CAN bus + +maintainers: + - Sriram Dash <sriram.dash@samsung.com> + +properties: + compatible: + const: bosch,m_can + + reg: + items: + - description: M_CAN registers map + - description: message RAM + + reg-names: + items: + - const: m_can + - const: message_ram + + interrupts: + items: + - description: interrupt line0 + - description: interrupt line1 + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: int0 + - const: int1 + minItems: 1 + maxItems: 2 + + clocks: + items: + - description: peripheral clock + - description: bus clock + + clock-names: + items: + - const: hclk + - const: cclk + + bosch,mram-cfg: + description: | + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + allOf: + - $ref: /schemas/types.yaml#/definitions/int32-array + - items: + items: + - description: The 'offset' is an address offset of the Message RAM + where the following elements start from. This is usually + set to 0x0 if you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 + + can-transceiver: + $ref: can-transceiver.yaml# + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - bosch,mram-cfg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <0 114 0x04>, <0 114 0x04>; + interrupt-names = "int0", "int1"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt deleted file mode 100644 index 0011f53ff159..000000000000 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.txt +++ /dev/null @@ -1,24 +0,0 @@ -Generic CAN transceiver Device Tree binding ------------------------------- - -CAN transceiver typically limits the max speed in standard CAN and CAN FD -modes. Typically these limitations are static and the transceivers themselves -provide no way to detect this limitation at runtime. For this situation, -the "can-transceiver" node can be used. - -Required Properties: - max-bitrate: a positive non 0 value that determines the max - speed that CAN/CAN-FD can run. Any other value - will be ignored. - -Examples: - -Based on Texas Instrument's TCAN1042HGV CAN Transceiver - -m_can0 { - .... - can-transceiver { - max-bitrate = <5000000>; - }; - ... -}; diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml new file mode 100644 index 000000000000..6396977d29e5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CAN transceiver Bindings + +description: CAN transceiver generic properties bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + max-bitrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. + minimum: 1 diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt deleted file mode 100644 index ed614383af9c..000000000000 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ /dev/null @@ -1,75 +0,0 @@ -Bosch MCAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "bosch,m_can" for M_CAN controllers -- reg : physical base address and size of the M_CAN - registers map and Message RAM -- reg-names : Should be "m_can" and "message_ram" -- interrupts : Should be the interrupt number of M_CAN interrupt - line 0 and line 1, could be same if sharing - the same interrupt. -- interrupt-names : Should contain "int0" and "int1" -- clocks : Clocks used by controller, should be host clock - and CAN clock. -- clock-names : Should contain "hclk" and "cclk" -- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- bosch,mram-cfg : Message RAM configuration data. - Multiple M_CAN instances can share the same Message - RAM and each element(e.g Rx FIFO or Tx Buffer and etc) - number in Message RAM is also configurable, - so this property is telling driver how the shared or - private Message RAM are used by this M_CAN controller. - - The format should be as follows: - <offset sidf_elems xidf_elems rxf0_elems rxf1_elems - rxb_elems txe_elems txb_elems> - The 'offset' is an address offset of the Message RAM - where the following elements start from. This is - usually set to 0x0 if you're using a private Message - RAM. The remain cells are used to specify how many - elements are used for each FIFO/Buffer. - - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words - - Please refer to 2.4.1 Message RAM Configuration in - Bosch M_CAN user manual for details. - -Optional Subnode: -- can-transceiver : Can-transceiver subnode describing maximum speed - that can be used for CAN/CAN-FD modes. See - Documentation/devicetree/bindings/net/can/can-transceiver.txt - for details. -Example: -SoC dtsi: -m_can1: can@20e8000 { - compatible = "bosch,m_can"; - reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; - reg-names = "m_can", "message_ram"; - interrupts = <0 114 0x04>, - <0 114 0x04>; - interrupt-names = "int0", "int1"; - clocks = <&clks IMX6SX_CLK_CANFD>, - <&clks IMX6SX_CLK_CANFD>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; -}; - -Board dts: -&m_can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_m_can1>; - status = "enabled"; - - can-transceiver { - max-bitrate = <5000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 6bdcc3f84bd3..3613c2c8f75d 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -14,7 +14,7 @@ Required properties: the interrupt. - interrupts: interrupt specification for data-ready. -See Documentation/devicetree/bindings/net/can/m_can.txt for additional +See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional required property details. Optional properties: diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 112011c51d5e..219bcbd0d344 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -42,7 +42,7 @@ child node of the serial node with UART. Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Required properties: diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 21c36e524993..8f5ae0b84eec 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -68,7 +68,7 @@ Required properties: Optional properties: - local-mac-address : see ./ethernet.txt - current-speed : current baud rate of QCA7000 which defaults to 115200 - if absent, see also ../serial/slave-device.txt + if absent, see also ../serial/serial.yaml UART Example: diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index ac8c76369a86..976f139bb66e 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -37,6 +37,12 @@ properties: description: The physical base address and size of full the CPSW module IO range + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + ranges: true clocks: @@ -111,13 +117,6 @@ properties: - reg - phys - mdio: - type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" - description: - CPSW MDIO bus. - cpts: type: object description: @@ -148,6 +147,15 @@ properties: - clocks - clock-names +patternProperties: + "^mdio@": + type: object + allOf: + - $ref: "ti,davinci-mdio.yaml#" + description: + CPSW MDIO bus. + + required: - compatible - reg @@ -159,6 +167,8 @@ required: - '#address-cells' - '#size-cells' +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -174,7 +184,6 @@ examples: #address-cells = <1>; #size-cells = <1>; syscon = <&scm_conf>; - inctrl-names = "default", "sleep"; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt index 6d03ff8c7068..f48c17b38f58 100644 --- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt @@ -15,8 +15,7 @@ standard BT HCI protocol with additional channels for the other functions. TI WiLink devices also have a separate WiFi interface as described in wireless/ti,wlcore.txt. -This bindings follows the UART slave device binding in -../serial/slave-device.txt. +This bindings follows the UART slave device binding in ../serial/serial.yaml. Required properties: - compatible: should be one of the following: diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml new file mode 100644 index 000000000000..1485d3fbabfd --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ EFUSE driver bindings + +maintainers: + - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - ingenic,jz4780-efuse + + reg: + maxItems: 1 + + clocks: + # Handle for the ahb for the efuse. + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4780-cgu.h> + + efuse@134100d0 { + compatible = "ingenic,jz4780-efuse"; + reg = <0x134100d0 0x2c>; + + clocks = <&cgu JZ4780_CLK_AHB2>; + }; + +... diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt index 84fdc422792e..b6acbe694ffb 100644 --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt @@ -18,7 +18,6 @@ Required properties: - reg-names: Must be - "elbi" External local bus interface registers - "cfg" Meson specific registers - - "phy" Meson PCIE PHY registers for AXG SoC Family - "config" PCIe configuration space - reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. - clocks: Must contain an entry for each entry in clock-names. @@ -26,13 +25,13 @@ Required properties: - "pclk" PCIe GEN 100M PLL clock - "port" PCIe_x(A or B) RC clock gate - "general" PCIe Phy clock - - "mipi" PCIe_x(A or B) 100M ref clock gate for AXG SoC Family - resets: phandle to the reset lines. -- reset-names: must contain "phy" "port" and "apb" - - "phy" Share PHY reset for AXG SoC Family +- reset-names: must contain "port" and "apb" - "port" Port A or B reset - "apb" Share APB reset -- phys: should contain a phandle to the shared phy for G12A SoC Family +- phys: should contain a phandle to the PCIE phy +- phy-names: must contain "pcie" + - device_type: should be "pci". As specified in designware-pcie.txt @@ -43,9 +42,8 @@ Example configuration: compatible = "amlogic,axg-pcie", "snps,dw-pcie"; reg = <0x0 0xf9800000 0x0 0x400000 0x0 0xff646000 0x0 0x2000 - 0x0 0xff644000 0x0 0x2000 0x0 0xf9f00000 0x0 0x100000>; - reg-names = "elbi", "cfg", "phy", "config"; + reg-names = "elbi", "cfg", "config"; reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; @@ -58,17 +56,15 @@ Example configuration: ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>; clocks = <&clkc CLKID_USB - &clkc CLKID_MIPI_ENABLE &clkc CLKID_PCIE_A &clkc CLKID_PCIE_CML_EN0>; clock-names = "general", - "mipi", "pclk", "port"; - resets = <&reset RESET_PCIE_PHY>, - <&reset RESET_PCIE_A>, + resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>; - reset-names = "phy", - "port", + reset-names = "port", "apb"; + phys = <&pcie_phy>; + phy-names = "pcie"; }; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt deleted file mode 100644 index 4a0475e2ba7e..000000000000 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Cadence PCIe endpoint controller - -Required properties: -- compatible: Should contain "cdns,cdns-pcie-ep" to identify the IP used. -- reg: Should contain the controller register base address and AXI interface - region base address respectively. -- reg-names: Must be "reg" and "mem" respectively. -- cdns,max-outbound-regions: Set to maximum number of outbound regions - -Optional properties: -- max-functions: Maximum number of functions that can be configured (default 1). -- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more - than one in the list. If only one PHY listed it must manage all lanes. -- phy-names: List of names to identify the PHY. - -Example: - -pcie@fc000000 { - compatible = "cdns,cdns-pcie-ep"; - reg = <0x0 0xfc000000 0x0 0x01000000>, - <0x0 0x80000000 0x0 0x40000000>; - reg-names = "reg", "mem"; - cdns,max-outbound-regions = <16>; - max-functions = /bits/ 8 <8>; - phys = <&ep_phy0 &ep_phy1>; - phy-names = "pcie-lane0","pcie-lane1"; -}; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml new file mode 100644 index 000000000000..2996f8d4777c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence PCIe EP Controller + +maintainers: + - Tom Joseph <tjoseph@cadence.com> + +allOf: + - $ref: "cdns-pcie.yaml#" + - $ref: "pci-ep.yaml#" + +properties: + compatible: + const: cdns,cdns-pcie-ep + + reg: + maxItems: 2 + + reg-names: + items: + - const: reg + - const: mem + +required: + - reg + - reg-names + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie-ep@fc000000 { + compatible = "cdns,cdns-pcie-ep"; + reg = <0x0 0xfc000000 0x0 0x01000000>, + <0x0 0x80000000 0x0 0x40000000>; + reg-names = "reg", "mem"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <8>; + phys = <&pcie_phy0>; + phy-names = "pcie-phy"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt deleted file mode 100644 index 91de69c713a9..000000000000 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt +++ /dev/null @@ -1,66 +0,0 @@ -* Cadence PCIe host controller - -This PCIe controller inherits the base properties defined in -host-generic-pci.txt. - -Required properties: -- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used. -- reg: Should contain the controller register base address, PCIe configuration - window base address, and AXI interface region base address respectively. -- reg-names: Must be "reg", "cfg" and "mem" respectively. -- #address-cells: Set to <3> -- #size-cells: Set to <2> -- device_type: Set to "pci" -- ranges: Ranges for the PCI memory and I/O regions -- #interrupt-cells: Set to <1> -- interrupt-map-mask and interrupt-map: Standard PCI properties to define the - mapping of the PCIe interface to interrupt numbers. - -Optional properties: -- cdns,max-outbound-regions: Set to maximum number of outbound regions - (default 32) -- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the - number of least significant bits kept during inbound (PCIe -> AXI) address - translations (default 32) -- vendor-id: The PCI vendor ID (16 bits, default is design dependent) -- device-id: The PCI device ID (16 bits, default is design dependent) -- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more - than one in the list. If only one PHY listed it must manage all lanes. -- phy-names: List of names to identify the PHY. - -Example: - -pcie@fb000000 { - compatible = "cdns,cdns-pcie-host"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0xff>; - linux,pci-domain = <0>; - cdns,max-outbound-regions = <16>; - cdns,no-bar-match-nbits = <32>; - vendor-id = /bits/ 16 <0x17cd>; - device-id = /bits/ 16 <0x0200>; - - reg = <0x0 0xfb000000 0x0 0x01000000>, - <0x0 0x41000000 0x0 0x00001000>, - <0x0 0x40000000 0x0 0x04000000>; - reg-names = "reg", "cfg", "mem"; - - ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>, - <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>; - - #interrupt-cells = <0x1>; - - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>; - - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - - msi-parent = <&its_pci>; - - phys = <&pcie_phy0>; - phy-names = "pcie-phy"; -}; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml new file mode 100644 index 000000000000..cabbe46ff578 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence PCIe host controller + +maintainers: + - Tom Joseph <tjoseph@cadence.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: "cdns-pcie-host.yaml#" + +properties: + compatible: + const: cdns,cdns-pcie-host + + reg: + maxItems: 3 + + reg-names: + items: + - const: reg + - const: cfg + - const: mem + + msi-parent: true + +required: + - reg + - reg-names + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@fb000000 { + compatible = "cdns,cdns-pcie-host"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + linux,pci-domain = <0>; + cdns,max-outbound-regions = <16>; + cdns,no-bar-match-nbits = <32>; + vendor-id = <0x17cd>; + device-id = <0x0200>; + + reg = <0x0 0xfb000000 0x0 0x01000000>, + <0x0 0x41000000 0x0 0x00001000>, + <0x0 0x40000000 0x0 0x04000000>; + reg-names = "reg", "cfg", "mem"; + + ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>, + <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>; + + #interrupt-cells = <0x1>; + + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1>, + <0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1>, + <0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1>, + <0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>; + + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + + msi-parent = <&its_pci>; + + phys = <&pcie_phy0>; + phy-names = "pcie-phy"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml new file mode 100644 index 000000000000..ab6e43b636ec --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence PCIe Host + +maintainers: + - Tom Joseph <tjoseph@cadence.com> + +allOf: + - $ref: "/schemas/pci/pci-bus.yaml#" + - $ref: "cdns-pcie.yaml#" + +properties: + cdns,no-bar-match-nbits: + description: + Set into the no BAR match register to configure the number of least + significant bits kept during inbound (PCIe -> AXI) address translations + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 64 + default: 32 + + msi-parent: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml new file mode 100644 index 000000000000..6887ccc339cc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence PCIe Core + +maintainers: + - Tom Joseph <tjoseph@cadence.com> + +properties: + cdns,max-outbound-regions: + description: maximum number of outbound regions + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + default: 32 + + phys: + description: + One per lane if more than one in the list. If only one PHY listed it must + manage all lanes. + minItems: 1 + maxItems: 16 + + phy-names: + items: + - const: pcie-phy + # FIXME: names when more than 1 diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt new file mode 100644 index 000000000000..b40fb5d15d3d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt @@ -0,0 +1,52 @@ +NXP Layerscape PCIe Gen4 controller + +This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all +the common properties defined in mobiveil-pcie.txt. + +Required properties: +- compatible: should contain the platform identifier such as: + "fsl,lx2160a-pcie" +- reg: base addresses and lengths of the PCIe controller register blocks. + "csr_axi_slave": Bridge config registers + "config_axi_slave": PCIe controller registers +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: It could include the following entries: + "intr": The interrupt that is asserted for controller interrupts + "aer": Asserted for aer interrupt when chip support the aer interrupt with + none MSI/MSI-X/INTx mode,but there is interrupt line for aer. + "pme": Asserted for pme interrupt when chip support the pme interrupt with + none MSI/MSI-X/INTx mode,but there is interrupt line for pme. +- dma-coherent: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. +- msi-parent : See the generic MSI binding described in + Documentation/devicetree/bindings/interrupt-controller/msi.txt. + +Example: + + pcie@3400000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + apio-wins = <8>; + ppio-wins = <8>; + dma-coherent; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt index b739f92da58e..bd43f3c3ece4 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -1,11 +1,11 @@ NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based) -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe controller is based on the Synopsis Designware PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. +Some of the controller instances are dual mode where in they can work either +in root port mode or endpoint mode but one at a time. Required properties: -- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie". -- device_type: Must be "pci" - power-domains: A phandle to the node that controls power to the respective PCIe controller and a specifier name for the PCIe controller. Following are the specifiers for the different PCIe controllers @@ -32,6 +32,32 @@ Required properties: entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: "intr": The Tegra interrupt that is asserted for controller interrupts +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - core +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - apb + - core +- phys: Must contain a phandle to P2U PHY for each entry in phy-names. +- phy-names: Must include an entry for each active lane. + "p2u-N": where N ranges from 0 to one less than the total number of lanes +- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed + by controller-id. Following are the controller ids for each controller. + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 +- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals + +RC mode: +- compatible: Tegra19x must contain "nvidia,tegra194-pcie" +- device_type: Must be "pci" for RC mode +- interrupt-names: Must include the following entries: "msi": The Tegra interrupt that is asserted when an MSI is received - bus-range: Range of bus numbers associated with this controller - #address-cells: Address representation for root ports (must be 3) @@ -60,27 +86,15 @@ Required properties: - interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties Please refer to the standard PCI bus binding document for a more detailed explanation. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - core -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - apb - - core -- phys: Must contain a phandle to P2U PHY for each entry in phy-names. -- phy-names: Must include an entry for each active lane. - "p2u-N": where N ranges from 0 to one less than the total number of lanes -- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed - by controller-id. Following are the controller ids for each controller. - 0: C0 - 1: C1 - 2: C2 - 3: C3 - 4: C4 - 5: C5 -- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals + +EP mode: +In Tegra194, Only controllers C0, C4 & C5 support EP mode. +- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep" +- reg-names: Must include the following entries: + "addr_space": Used to map remote RC address space +- reset-gpios: Must contain a phandle to a GPIO controller followed by + GPIO that is being used as PERST input signal. Please refer to pci.txt + document. Optional properties: - pinctrl-names: A list of pinctrl state names. @@ -104,6 +118,8 @@ Optional properties: specified in microseconds - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be specified in microseconds + +RC mode: - vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot if the platform has one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform). @@ -111,14 +127,21 @@ Optional properties: if the platform has one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform). +EP mode: +- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller + followed by GPIO that is being used to enable REFCLK to controller from host + +NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to +operate in the endpoint mode because of the way the platform is designed. + Examples: ========= -Tegra194: --------- +Tegra194 RC mode: +----------------- pcie@14180000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ @@ -169,3 +192,53 @@ Tegra194: <&p2u_hsio_5>; phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; }; + +Tegra194 EP mode: +----------------- + + pcie_ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ + 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <8>; + num-ib-windows = <2>; + num-ob-windows = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml new file mode 100644 index 000000000000..b3df100705b0 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCI Endpoint Controller Schema + +description: | + Common properties for PCI Endpoint Controller Nodes. + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +properties: + $nodename: + pattern: "^pcie-ep@" + + max-functions: + description: Maximum number of functions that can be configured + allOf: + - $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + default: 1 + maximum: 255 + + max-link-speed: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4 ] + + num-lanes: + description: maximum number of lanes + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + default: 1 + maximum: 16 + +required: + - compatible diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml index e5922b427342..c03b83103e87 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml @@ -34,6 +34,8 @@ required: - resets - "#phy-cells" +additionalProperties: false + examples: - | #include <dt-bindings/clock/sun50i-h6-ccu.h> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml new file mode 100644 index 000000000000..88683db6cf81 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic AXG shared MIPI/PCIE analog PHY + +maintainers: + - Remi Pommarel <repk@triplefau.lt> + +properties: + compatible: + const: amlogic,axg-mipi-pcie-analog-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + mpphy: phy@0 { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + reg = <0x0 0x0 0x0 0xc>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml new file mode 100644 index 000000000000..086478aec946 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic AXG PCIE PHY + +maintainers: + - Remi Pommarel <repk@triplefau.lt> + +properties: + compatible: + const: amlogic,axg-pcie-phy + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: analog + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - phys + - phy-names + - resets + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/amlogic,meson-axg-reset.h> + #include <dt-bindings/phy/phy.h> + pcie_phy: pcie-phy@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0x0 0xff644000 0x0 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + phys = <&mipi_analog_phy PHY_TYPE_PCIE>; + phy-names = "analog"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml index 346f9c35427c..453c083cf44c 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml @@ -44,6 +44,8 @@ required: - reset-names - "#phy-cells" +additionalProperties: false + examples: - | phy@46000 { diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 0ccee64c6962..9a346d6290d9 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -40,6 +40,8 @@ required: - reg - clocks +additionalProperties: false + examples: - | sysconf: chiptop@e0200000 { diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml index 5ab436189f3b..00609ace677c 100644 --- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml @@ -31,6 +31,8 @@ required: - reset-gpios - "#phy-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml new file mode 100644 index 000000000000..c97043eaa8fb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP3 USB PHY bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + $nodename: + pattern: '^usb-phy@[a-f0-9]+$' + + compatible: + const: marvell,mmp3-usb-phy + + reg: + maxItems: 1 + description: base address of the device + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 9fb682e47c29..38c5fa21f435 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -37,6 +37,7 @@ Required properties: - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - Tegra210: "nvidia,tegra210-xusb-padctl" - Tegra186: "nvidia,tegra186-xusb-padctl" + - Tegra194: "nvidia,tegra194-xusb-padctl" - reg: Physical base address and length of the controller's registers. - resets: Must contain an entry for each entry in reset-names. - reset-names: Must include the following entries: @@ -62,6 +63,10 @@ For Tegra186: - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. - vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. +For Tegra194: +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply + 3.3 V. +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. Pad nodes: ========== @@ -154,6 +159,11 @@ For Tegra210, the list of valid PHY nodes is given below: - sata: sata-0 - functions: "usb3-ss", "sata" +For Tegra194, the list of valid PHY nodes is given below: +- usb2: usb2-0, usb2-1, usb2-2, usb2-3 + - functions: "xusb" +- usb3: usb3-0, usb3-1, usb3-2, usb3-3 + - functions: "xusb" Port nodes: =========== @@ -174,6 +184,12 @@ Required properties: - "device": for USB device mode - "otg": for USB OTG mode +Required properties for OTG/Peripheral capable USB2 ports: +- usb-role-switch: Boolean property to indicate that the port support OTG or + peripheral mode. If present, the port supports switching between USB host + and peripheral roles. Connector should be added as subnode. + See usb/usb-conn-gpio.txt. + Optional properties: - nvidia,internal: A boolean property whose presence determines that a port is internal. In the absence of this property the port is considered to be @@ -221,6 +237,11 @@ Optional properties: is internal. In the absence of this property the port is considered to be external. +- maximum-speed: Only for Tegra194. A string property that specifies maximum + supported speed of a usb3 port. Valid values are: + - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed. + - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only. + For Tegra124 and Tegra132, the XUSB pad controller exposes the following ports: - 3x USB2: usb2-0, usb2-1, usb2-2 @@ -233,6 +254,9 @@ For Tegra210, the XUSB pad controller exposes the following ports: - 2x HSIC: hsic-0, hsic-1 - 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 +For Tegra194, the XUSB pad controller exposes the following ports: +- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 +- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 Examples: ========= diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt deleted file mode 100644 index 7183b9102f91..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt +++ /dev/null @@ -1,13 +0,0 @@ -Marvell MMP3 USB PHY --------------------- - -Required properties: -- compatible: must be "marvell,mmp3-usb-phy" -- #phy-cells: must be 0 - -Example: - usb-phy: usb-phy@d4207000 { - compatible = "marvell,mmp3-usb-phy"; - reg = <0xd4207000 0x40>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt deleted file mode 100644 index 541f5298827c..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ /dev/null @@ -1,81 +0,0 @@ -ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK - -Required properties (phy (parent) node): - - compatible : should be one of the listed compatibles: - * "rockchip,px30-usb2phy" - * "rockchip,rk3228-usb2phy" - * "rockchip,rk3328-usb2phy" - * "rockchip,rk3366-usb2phy" - * "rockchip,rk3399-usb2phy" - * "rockchip,rv1108-usb2phy" - - reg : the address offset of grf for usb-phy configuration. - - #clock-cells : should be 0. - - clock-output-names : specify the 480m output clock name. - -Optional properties: - - clocks : phandle + phy specifier pair, for the input clock of phy. - - clock-names : input clock name of phy, must be "phyclk". - - assigned-clocks : phandle of usb 480m clock. - - assigned-clock-parents : parent of usb 480m clock, select between - usb-phy output 480m and xin24m. - Refer to clk/clock-bindings.txt for generic clock - consumer properties. - - rockchip,usbgrf : phandle to the syscon managing the "usb general - register files". When set driver will request its - phandle as one companion-grf for some special SoCs - (e.g RV1108). - - extcon : phandle to the extcon device providing the cable state for - the otg phy. - -Required nodes : a sub-node is required for each port the phy provides. - The sub-node name is used to identify host or otg port, - and shall be the following entries: - * "otg-port" : the name of otg port. - * "host-port" : the name of host port. - -Required properties (port (child) node): - - #phy-cells : must be 0. See ./phy-bindings.txt for details. - - interrupts : specify an interrupt for each entry in interrupt-names. - - interrupt-names : a list which should be one of the following cases: - Regular case: - * "otg-id" : for the otg id interrupt. - * "otg-bvalid" : for the otg vbus interrupt. - * "linestate" : for the host/otg linestate interrupt. - Some SoCs use one interrupt with the above muxed together, so for these - * "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate - to one. - -Optional properties: - - phy-supply : phandle to a regulator that provides power to VBUS. - See ./phy-bindings.txt for details. - -Example: - -grf: syscon@ff770000 { - compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - -... - - u2phy: usb2-phy@700 { - compatible = "rockchip,rk3366-usb2phy"; - reg = <0x700 0x2c>; - #clock-cells = <0>; - clock-output-names = "sclk_otgphy0_480m"; - - u2phy_otg: otg-port { - #phy-cells = <0>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "otg-id", "otg-bvalid", "linestate"; - }; - - u2phy_host: host-port { - #phy-cells = <0>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "linestate"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml new file mode 100644 index 000000000000..cb71561a21b4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip USB2.0 phy with inno IP block + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-usb2phy + - rockchip,rk3228-usb2phy + - rockchip,rk3328-usb2phy + - rockchip,rk3366-usb2phy + - rockchip,rk3399-usb2phy + - rockchip,rv1108-usb2phy + + reg: + maxItems: 1 + + clock-output-names: + description: + The usb 480m output clock name. + + "#clock-cells": + const: 0 + + "#phy-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: phyclk + + assigned-clocks: + description: + Phandle of the usb 480m clock. + + assigned-clock-parents: + description: + Parent of the usb 480m clock. + Select between usb-phy output 480m and xin24m. + Refer to clk/clock-bindings.txt for generic clock consumer properties. + + extcon: + description: + Phandle to the extcon device providing the cable state for the otg phy. + + rockchip,usbgrf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'usb general register files'. + When set the driver will request its phandle as one companion-grf + for some special SoCs (e.g rv1108). + + host-port: + type: object + additionalProperties: false + + properties: + "#phy-cells": + const: 0 + + interrupts: + description: host linestate interrupt + + interrupt-names: + const: linestate + + phy-supply: + description: + Phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + + required: + - "#phy-cells" + - interrupts + - interrupt-names + + otg-port: + type: object + additionalProperties: false + + properties: + "#phy-cells": + const: 0 + + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + oneOf: + - const: linestate + - const: otg-mux + - items: + - const: otg-bvalid + - const: otg-id + - const: linestate + + phy-supply: + description: + Phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + + required: + - "#phy-cells" + - interrupts + - interrupt-names + +required: + - compatible + - reg + - clock-output-names + - "#clock-cells" + - "#phy-cells" + - host-port + - otg-port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + u2phy0: usb2-phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + clock-output-names = "clk_usbphy0_480m"; + #clock-cells = <0>; + #phy-cells = <0>; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", "linestate"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 452cee1aed32..fd1982c56104 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -159,6 +159,8 @@ required: - "#reset-cells" - ranges +additionalProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 135c7dfbc180..7651a675ab2d 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -57,6 +57,8 @@ patternProperties: required: - compatible +additionalProperties: false + examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 824f7fd1d51b..36feaf5e2dff 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -70,6 +70,8 @@ required: - compatible - aspeed,external-nodes +additionalProperties: false + examples: - | apb { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index ac8d1c30a8ed..45af29bc3202 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -92,6 +92,8 @@ patternProperties: required: - compatible +additionalProperties: false + examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index eb39f5051159..e8abbdad7b5d 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -38,7 +38,7 @@ Bank: 3 (A, B and C) 0xffffffff 0x7fff3ccf /* pioB */ 0xffffffff 0x007fffff /* pioC */ -For each peripheral/bank we will descibe in a u32 if a pin can be +For each peripheral/bank we will describe in a u32 if a pin can be configured in it by putting 1 to the pin bit (1 << pin) Let's take the pioA on peripheral B diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt deleted file mode 100644 index e4e01c05cf83..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Freescale IMX8MM IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory -for common binding part and usage. - -Required properties: -- compatible: "fsl,imx8mm-iomuxc" -- reg: should contain the base physical address and size of the iomuxc - registers. - -Required properties in sub-nodes: -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini - Reference Manual for detailed CONFIG settings. - -Examples: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mm-iomuxc"; - reg = <0x0 0x30330000 0x0 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml new file mode 100644 index 000000000000..d98a3866add8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8MM IOMUX Controller + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8mm-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart2: uart2grp { + fsl,pins = + <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>, + <0x240 0x4A8 0x000 0x0 0x0 0x140>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt deleted file mode 100644 index 330716c971b9..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt +++ /dev/null @@ -1,39 +0,0 @@ -* Freescale IMX8MN IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory -for common binding part and usage. - -Required properties: -- compatible: "fsl,imx8mn-iomuxc" -- reg: should contain the base physical address and size of the iomuxc - registers. - -Required properties in sub-nodes: -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano - Reference Manual for detailed CONFIG settings. - -Examples: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mn-iomuxc"; - reg = <0x0 0x30330000 0x0 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 - MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 - MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml new file mode 100644 index 000000000000..b9aa180e07e4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8MN IOMUX Controller + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8mn-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8M Nano Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mn-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart2: uart2grp { + fsl,pins = + <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>, + <0x240 0x4A8 0x000 0x0 0x0 0x140>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml index 2e31e120395e..6297e78418cf 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml @@ -30,8 +30,6 @@ patternProperties: properties: fsl,pins: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg @@ -39,6 +37,22 @@ patternProperties: be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins @@ -59,10 +73,9 @@ examples: reg = <0x30330000 0x10000>; pinctrl_uart2: uart2grp { - fsl,pins = < - 0x228 0x488 0x5F0 0x0 0x6 0x49 - 0x228 0x488 0x000 0x0 0x0 0x49 - >; + fsl,pins = + <0x228 0x488 0x5F0 0x0 0x6 0x49>, + <0x228 0x488 0x000 0x0 0x0 0x49>; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt deleted file mode 100644 index 66de75090458..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Freescale IMX8MQ IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory -for common binding part and usage. - -Required properties: -- compatible: "fsl,imx8mq-iomuxc" -- reg: should contain the base physical address and size of the iomuxc - registers. - -Required properties in sub-nodes: -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad - Reference Manual for detailed CONFIG settings. - -Examples: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mq-iomuxc"; - reg = <0x0 0x30330000 0x0 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 - MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml new file mode 100644 index 000000000000..b30c704fcfa1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8MQ IOMUX Controller + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8mq-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8M Quad Reference Manual for detailed CONFIG settings. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mq-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = + <0x234 0x49C 0x4F4 0x0 0x0 0x49>, + <0x238 0x4A0 0x4F4 0x0 0x0 0x49>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file mode 100644 index 000000000000..63d1cfe86c6e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block + +maintainers: + - Sricharan R <sricharan@codeaurora.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pinmux$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + allOf: + - $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 4 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + + serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt deleted file mode 100644 index 8173b12138ad..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt +++ /dev/null @@ -1,27 +0,0 @@ -UniPhier SoCs pin controller - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-pinctrl" - for LD4 SoC - "socionext,uniphier-pro4-pinctrl" - for Pro4 SoC - "socionext,uniphier-sld8-pinctrl" - for sLD8 SoC - "socionext,uniphier-pro5-pinctrl" - for Pro5 SoC - "socionext,uniphier-pxs2-pinctrl" - for PXs2 SoC - "socionext,uniphier-ld6b-pinctrl" - for LD6b SoC - "socionext,uniphier-ld11-pinctrl" - for LD11 SoC - "socionext,uniphier-ld20-pinctrl" - for LD20 SoC - "socionext,uniphier-pxs3-pinctrl" - for PXs3 SoC - -Note: -The UniPhier pinctrl should be a subnode of a "syscon" compatible node. - -Example: - soc-glue@5f800000 { - compatible = "socionext,uniphier-pro4-soc-glue", - "simple-mfd", "syscon"; - reg = <0x5f800000 0x2000>; - - pinctrl: pinctrl { - compatible = "socionext,uniphier-pro4-pinctrl"; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml new file mode 100644 index 000000000000..f8a93d8680f9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier SoCs pin controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + $nodename: + pattern: "pinctrl" + + compatible: + enum: + - socionext,uniphier-ld4-pinctrl + - socionext,uniphier-pro4-pinctrl + - socionext,uniphier-sld8-pinctrl + - socionext,uniphier-pro5-pinctrl + - socionext,uniphier-pxs2-pinctrl + - socionext,uniphier-ld6b-pinctrl + - socionext,uniphier-ld11-pinctrl + - socionext,uniphier-ld20-pinctrl + - socionext,uniphier-pxs3-pinctrl + +required: + - compatible + +examples: + - | + // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index ef4de32cb17c..46a0478cb924 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -194,6 +194,8 @@ required: - ranges - pins-are-numbered +additionalProperties: false + examples: - | #include <dt-bindings/pinctrl/stm32-pinfunc.h> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index d3098c924b25..6c6079fe1351 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -68,6 +68,8 @@ required: - "#power-domain-cells" - amlogic,ao-sysctrl +additionalProperties: false + examples: - | pwrc: power-controller { diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml new file mode 100644 index 000000000000..bc4e037f3f73 --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +# Copyright (c) 2019 Amlogic, Inc +# Author: Jianxin Pan <jianxin.pan@amlogic.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Secure Power Domains + +maintainers: + - Jianxin Pan <jianxin.pan@amlogic.com> + +description: |+ + Secure Power Domains used in Meson A1/C1 SoCs, and should be the child node + of secure-monitor. + +properties: + compatible: + enum: + - amlogic,meson-a1-pwrc + + "#power-domain-cells": + const: 1 + +required: + - compatible + - "#power-domain-cells" + +examples: + - | + secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,meson-a1-pwrc"; + #power-domain-cells = <1>; + }; + }; + diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 6047aacd7766..ff5936e4a215 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -114,18 +114,18 @@ examples: domain-idle-states = <&DOMAIN_PWR_DN>; }; - DOMAIN_RET: state@0 { - compatible = "domain-idle-state"; - reg = <0x0 0x0>; - entry-latency-us = <1000>; - exit-latency-us = <2000>; - min-residency-us = <10000>; - }; - - DOMAIN_PWR_DN: state@1 { - compatible = "domain-idle-state"; - reg = <0x1 0x0>; - entry-latency-us = <5000>; - exit-latency-us = <8000>; - min-residency-us = <7000>; + domain-idle-states { + DOMAIN_RET: domain-retention { + compatible = "domain-idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + min-residency-us = <10000>; + }; + + DOMAIN_PWR_DN: domain-pwr-dn { + compatible = "domain-idle-state"; + entry-latency-us = <5000>; + exit-latency-us = <8000>; + min-residency-us = <7000>; + }; }; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt deleted file mode 100644 index 5f24586c8cf3..000000000000 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ /dev/null @@ -1,35 +0,0 @@ -DT bindings for the Renesas Advanced Power Management Unit - -Renesas R-Car and RZ/G1 SoCs utilize one or more APMU hardware units -for CPU core power domain control including SMP boot and CPU Hotplug. - -Required properties: - -- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback. - Examples with soctypes are: - - "renesas,r8a7743-apmu" (RZ/G1M) - - "renesas,r8a7744-apmu" (RZ/G1N) - - "renesas,r8a7745-apmu" (RZ/G1E) - - "renesas,r8a77470-apmu" (RZ/G1C) - - "renesas,r8a7790-apmu" (R-Car H2) - - "renesas,r8a7791-apmu" (R-Car M2-W) - - "renesas,r8a7792-apmu" (R-Car V2H) - - "renesas,r8a7793-apmu" (R-Car M2-N) - - "renesas,r8a7794-apmu" (R-Car E2) - -- reg: Base address and length of the I/O registers used by the APMU. - -- cpus: This node contains a list of CPU cores, which should match the order - of CPU cores used by the WUPCR and PSTR registers in the Advanced Power - Management Unit section of the device's datasheet. - - -Example: - -This shows the r8a7791 APMU that can control CPU0 and CPU1. - - apmu@e6152000 { - compatible = "renesas,r8a7791-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml new file mode 100644 index 000000000000..078b2cb40fe3 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,apmu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Advanced Power Management Unit + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: + Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for + CPU core power domain control including SMP boot and CPU Hotplug. + +properties: + compatible: + items: + - enum: + - renesas,r8a7743-apmu # RZ/G1M + - renesas,r8a7744-apmu # RZ/G1N + - renesas,r8a7745-apmu # RZ/G1E + - renesas,r8a77470-apmu # RZ/G1C + - renesas,r8a7790-apmu # R-Car H2 + - renesas,r8a7791-apmu # R-Car M2-W + - renesas,r8a7792-apmu # R-Car V2H + - renesas,r8a7793-apmu # R-Car M2-N + - renesas,r8a7794-apmu # R-Car E2 + - const: renesas,apmu + + reg: + maxItems: 1 + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Array of phandles pointing to CPU cores, which should match the order of + CPU cores used by the WUPCR and PSTR registers in the Advanced Power + Management Unit section of the device's datasheet. + +required: + - compatible + - reg + - cpus + +additionalProperties: false + +examples: + - | + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0xe6152000 0x188>; + cpus = <&cpu0 &cpu1>; + }; diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt deleted file mode 100644 index acb41fade926..000000000000 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ /dev/null @@ -1,62 +0,0 @@ -DT bindings for the Renesas R-Car (RZ/G) System Controller - -== System Controller Node == - -The R-Car (RZ/G) System Controller provides power management for the CPU cores -and various coprocessors. - -Required properties: - - compatible: Must contain exactly one of the following: - - "renesas,r8a7743-sysc" (RZ/G1M) - - "renesas,r8a7744-sysc" (RZ/G1N) - - "renesas,r8a7745-sysc" (RZ/G1E) - - "renesas,r8a77470-sysc" (RZ/G1C) - - "renesas,r8a774a1-sysc" (RZ/G2M) - - "renesas,r8a774b1-sysc" (RZ/G2N) - - "renesas,r8a774c0-sysc" (RZ/G2E) - - "renesas,r8a7779-sysc" (R-Car H1) - - "renesas,r8a7790-sysc" (R-Car H2) - - "renesas,r8a7791-sysc" (R-Car M2-W) - - "renesas,r8a7792-sysc" (R-Car V2H) - - "renesas,r8a7793-sysc" (R-Car M2-N) - - "renesas,r8a7794-sysc" (R-Car E2) - - "renesas,r8a7795-sysc" (R-Car H3) - - "renesas,r8a7796-sysc" (R-Car M3-W) - - "renesas,r8a77961-sysc" (R-Car M3-W+) - - "renesas,r8a77965-sysc" (R-Car M3-N) - - "renesas,r8a77970-sysc" (R-Car V3M) - - "renesas,r8a77980-sysc" (R-Car V3H) - - "renesas,r8a77990-sysc" (R-Car E3) - - "renesas,r8a77995-sysc" (R-Car D3) - - reg: Address start and address range for the device. - - #power-domain-cells: Must be 1. - - -Example: - - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7791-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; - - -== PM Domain Consumers == - -Devices residing in a power area must refer to that power area, as documented -by the generic PM domain bindings in -Documentation/devicetree/bindings/power/power_domain.txt. - -Required properties: - - power-domains: A phandle and symbolic PM domain specifier, as defined in - <dt-bindings/power/r8a77*-sysc.h>. - - -Example: - - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7791_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml new file mode 100644 index 000000000000..e59331e1d944 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car and RZ/G System Controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: + The R-Car (RZ/G) System Controller provides power management for the CPU + cores and various coprocessors. + +properties: + compatible: + enum: + - renesas,r8a7743-sysc # RZ/G1M + - renesas,r8a7744-sysc # RZ/G1N + - renesas,r8a7745-sysc # RZ/G1E + - renesas,r8a77470-sysc # RZ/G1C + - renesas,r8a774a1-sysc # RZ/G2M + - renesas,r8a774b1-sysc # RZ/G2N + - renesas,r8a774c0-sysc # RZ/G2E + - renesas,r8a7779-sysc # R-Car H1 + - renesas,r8a7790-sysc # R-Car H2 + - renesas,r8a7791-sysc # R-Car M2-W + - renesas,r8a7792-sysc # R-Car V2H + - renesas,r8a7793-sysc # R-Car M2-N + - renesas,r8a7794-sysc # R-Car E2 + - renesas,r8a7795-sysc # R-Car H3 + - renesas,r8a77961-sysc # R-Car M3-W+ + - renesas,r8a77965-sysc # R-Car M3-N + - renesas,r8a7796-sysc # R-Car M3-W + - renesas,r8a77970-sysc # R-Car V3M + - renesas,r8a77980-sysc # R-Car V3H + - renesas,r8a77990-sysc # R-Car E3 + - renesas,r8a77995-sysc # R-Car D3 + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + // System Controller node + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0xe6180000 0x0200>; + #power-domain-cells = <1>; + }; + + - | + // Power Domain consumers + #include <dt-bindings/power/r8a7791-sysc.h> + + cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml index 520e07e6f21b..3412fe7e1e80 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml @@ -41,6 +41,8 @@ required: - regmap - offset +additionalProperties: false + allOf: - if: not: diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml index d38006b1f1f4..b80772cb9f06 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -41,6 +41,8 @@ required: - regmap - offset +additionalProperties: false + allOf: - if: not: diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml index deef010ec535..62eeddb65aed 100644 --- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml @@ -32,3 +32,6 @@ properties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml index 9e21b83d717e..239b49fad805 100644 --- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml +++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml @@ -55,6 +55,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c@1 { diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt index 95536d83c5f2..29adff59c479 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt @@ -19,10 +19,15 @@ Required properties: - "pwm1-8": the eight per PWM clocks for mt2712 - "pwm1-6": the six per PWM clocks for mt7622 - "pwm1-5": the five per PWM clocks for mt7623 + - "pwm1" : the PWM1 clock for mt7629 - pinctrl-names: Must contain a "default" entry. - pinctrl-0: One property must exist for each entry in pinctrl-names. See pinctrl/pinctrl-bindings.txt for details of the property values. +Optional properties: +- assigned-clocks: Reference to the PWM clock entries. +- assigned-clock-parents: The phandle of the parent clock of PWM clock. + Example: pwm0: pwm@11006000 { compatible = "mediatek,mt7623-pwm"; diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml index 4969a954993c..4bf62a3d5bba 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml @@ -19,6 +19,10 @@ properties: - renesas,tpu-r8a7744 # RZ/G1N - renesas,tpu-r8a7745 # RZ/G1E - renesas,tpu-r8a7790 # R-Car H2 + - renesas,tpu-r8a7791 # R-Car M2-W + - renesas,tpu-r8a7792 # R-Car V2H + - renesas,tpu-r8a7793 # R-Car M2-N + - renesas,tpu-r8a7794 # R-Car E2 - renesas,tpu-r8a7795 # R-Car H3 - renesas,tpu-r8a7796 # R-Car M3-W - renesas,tpu-r8a77965 # R-Car M3-N diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml index 7d724159f890..ce0a4021ae7f 100644 --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -24,8 +24,11 @@ properties: const: maxim,max77650-regulator patternProperties: - "^regulator@[0-3]$": + "^regulator-(ldo|sbb[0-2])$": $ref: "regulator.yaml#" required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt deleted file mode 100644 index 6189df71ea98..000000000000 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ /dev/null @@ -1,64 +0,0 @@ -STMicroelectronics STPMIC1 Voltage regulators - -Regulator Nodes are optional depending on needs. - -Available Regulators in STPMIC1 device are: - - buck1 for Buck BUCK1 - - buck2 for Buck BUCK2 - - buck3 for Buck BUCK3 - - buck4 for Buck BUCK4 - - ldo1 for LDO LDO1 - - ldo2 for LDO LDO2 - - ldo3 for LDO LDO3 - - ldo4 for LDO LDO4 - - ldo5 for LDO LDO5 - - ldo6 for LDO LDO6 - - vref_ddr for LDO Vref DDR - - boost for Buck BOOST - - pwr_sw1 for VBUS_OTG switch - - pwr_sw2 for SW_OUT switch - -Switches are fixed voltage regulators with only enable/disable capability. - -Optional properties: -- st,mask-reset: mask reset for this regulator: the regulator configuration - is maintained during pmic reset. -- regulator-over-current-protection: - if set, all regulators are switched off in case of over-current detection - on this regulator, - if not set, the driver only sends an over-current event. -- interrupts: index of current limit detection interrupt -- <regulator>-supply: phandle to the parent supply/regulator node - each regulator supply can be described except vref_ddr. -- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. - -Example: -regulators { - compatible = "st,stpmic1-regulators"; - - ldo6-supply = <&v3v3>; - - vdd_core: buck1 { - regulator-name = "vdd_core"; - interrupts = <IT_CURLIM_BUCK1 0>; - st,mask-reset; - regulator-pull-down; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1200000>; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - interrupts = <IT_CURLIM_BUCK4 0>; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - v1v8: ldo6 { - regulator-name = "v1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-over-current-protection; - }; -}; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml new file mode 100644 index 000000000000..084960a8f17a --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -0,0 +1,324 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP4+ Remoteproc Devices + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: + The OMAP family of SoCs usually have one or more slave processor sub-systems + that are used to offload some of the processor-intensive tasks, or to manage + other hardware accelerators, for achieving various system level goals. + + The processor cores in the sub-system are usually behind an IOMMU, and may + contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2 + caches, an Interrupt Controller, a Cache Controller etc. + + The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor + sub-system. The DSP processor sub-system can contain any of the TI's C64x, + C66x or C67x family of DSP cores as the main execution unit. The IPU processor + sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core + Cortex-M4 processors. + + Each remote processor sub-system is represented as a single DT node. Each node + has a number of required or optional properties that enable the OS running on + the host processor (MPU) to perform the device management of the remote + processor and to communicate with the remote processor. The various properties + can be classified as constant or variable. The constant properties are + dictated by the SoC and does not change from one board to another having the + same SoC. Examples of constant properties include 'iommus', 'reg'. The + variable properties are dictated by the system integration aspects such as + memory on the board, or configuration used within the corresponding firmware + image. Examples of variable properties include 'mboxes', 'memory-region', + 'timers', 'watchdog-timers' etc. + +properties: + compatible: + enum: + - ti,omap4-dsp + - ti,omap5-dsp + - ti,dra7-dsp + - ti,omap4-ipu + - ti,omap5-ipu + - ti,dra7-ipu + + iommus: + minItems: 1 + maxItems: 2 + description: | + phandles to OMAP IOMMU nodes, that need to be programmed + for this remote processor to access any external RAM memory or + other peripheral device address spaces. This property usually + has only a single phandle. Multiple phandles are used only in + cases where the sub-system has different ports for different + sub-modules within the processor sub-system (eg: DRA7 DSPs), + and need the same programming in both the MMUs. + + mboxes: + minItems: 1 + maxItems: 2 + description: | + OMAP Mailbox specifier denoting the sub-mailbox, to be used for + communication with the remote processor. The specifier format is + as per the bindings, + Documentation/devicetree/bindings/mailbox/omap-mailbox.txt + This property should match with the sub-mailbox node used in + the firmware image. + + clocks: + description: | + Main functional clock for the remote processor + + resets: + description: | + Reset handles for the remote processor + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + +# Optional properties: +# -------------------- +# Some of these properties are mandatory on some SoCs, and some are optional +# depending on the configuration of the firmware image to be executed on the +# remote processor. The conditions are mentioned for each property. +# +# The following are the optional properties: + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the reserved memory node to be associated + with the remoteproc device. The reserved memory node + can be a CMA memory node, and should be defined as + per the bindings, + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + + reg: + description: | + Address space for any remoteproc memories present on + the SoC. Should contain an entry for each value in + 'reg-names'. These are mandatory for all DSP and IPU + processors that have them (OMAP4/OMAP5 DSPs do not have + any RAMs) + + reg-names: + description: | + Required names for each of the address spaces defined in + the 'reg' property. Expects the names from the following + list, in the specified order, each representing the corresponding + internal RAM memory region. + minItems: 1 + maxItems: 3 + items: + - const: l2ram + - const: l1pram + - const: l1dram + + ti,bootreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Should be a triple of the phandle to the System Control + Configuration region that contains the boot address + register, the register offset of the boot address + register within the System Control module, and the bit + shift within the register. This property is required for + all the DSP instances on OMAP4, OMAP5 and DRA7xx SoCs. + + ti,autosuspend-delay-ms: + description: | + Custom autosuspend delay for the remoteproc in milliseconds. + Recommended values is preferable to be in the order of couple + of seconds. A negative value can also be used to disable the + autosuspend behavior. + + ti,timers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + One or more phandles to OMAP DMTimer nodes, that serve + as System/Tick timers for the OS running on the remote + processors. This will usually be a single timer if the + processor sub-system is running in SMP mode, or one per + core in the processor sub-system. This can also be used + to reserve specific timers to be dedicated to the + remote processors. + + This property is mandatory on remote processors requiring + external tick wakeup, and to support Power Management + features. The timers to be used should match with the + timers used in the firmware image. + + ti,watchdog-timers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + One or more phandles to OMAP DMTimer nodes, used to + serve as Watchdog timers for the processor cores. This + will usually be one per executing processor core, even + if the processor sub-system is running a SMP OS. + + The timers to be used should match with the watchdog + timers used in the firmware image. + +if: + properties: + compatible: + enum: + - ti,dra7-dsp +then: + properties: + reg: + minItems: 3 + maxItems: 3 + required: + - reg + - reg-names + - ti,bootreg + +else: + if: + properties: + compatible: + enum: + - ti,omap4-ipu + - ti,omap5-ipu + - ti,dra7-ipu + then: + properties: + reg: + minItems: 1 + maxItems: 1 + ti,bootreg: false + required: + - reg + - reg-names + + else: + properties: + reg: false + required: + - ti,bootreg + +required: + - compatible + - iommus + - mboxes + - clocks + - resets + - firmware-name + +additionalProperties: false + +examples: + - | + + //Example 1: OMAP4 DSP + + /* DSP Reserved Memory node */ + #include <dt-bindings/clock/omap4.h> + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + + dsp_memory_region: dsp-memory@98000000 { + compatible = "shared-dma-pool"; + reg = <0x98000000 0x800000>; + reusable; + }; + }; + + /* DSP node */ + ocp { + dsp: dsp { + compatible = "ti,omap4-dsp"; + ti,bootreg = <&scm_conf 0x304 0>; + iommus = <&mmu_dsp>; + mboxes = <&mailbox &mbox_dsp>; + memory-region = <&dsp_memory_region>; + ti,timers = <&timer5>; + ti,watchdog-timers = <&timer6>; + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + resets = <&prm_tesla 0>, <&prm_tesla 1>; + firmware-name = "omap4-dsp-fw.xe64T"; + }; + }; + + - |+ + + //Example 2: OMAP5 IPU + + /* IPU Reserved Memory node */ + #include <dt-bindings/clock/omap5.h> + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + ipu_memory_region: ipu-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0 0x95800000 0 0x3800000>; + reusable; + }; + }; + + /* IPU node */ + ocp { + #address-cells = <1>; + #size-cells = <1>; + + ipu: ipu@55020000 { + compatible = "ti,omap5-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu>; + mboxes = <&mailbox &mbox_ipu>; + memory-region = <&ipu_memory_region>; + ti,timers = <&timer3>, <&timer4>; + ti,watchdog-timers = <&timer9>, <&timer11>; + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; + resets = <&prm_core 2>; + firmware-name = "omap5-ipu-fw.xem4"; + }; + }; + + - |+ + + //Example 3: DRA7xx/AM57xx DSP + + /* DSP1 Reserved Memory node */ + #include <dt-bindings/clock/dra7.h> + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + }; + }; + + /* DSP1 node */ + ocp { + #address-cells = <1>; + #size-cells = <1>; + + dsp1: dsp@40800000 { + compatible = "ti,dra7-dsp"; + reg = <0x40800000 0x48000>, + <0x40e00000 0x8000>, + <0x40f00000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x55c 0>; + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; + mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; + memory-region = <&dsp1_memory_region>; + ti,timers = <&timer5>; + ti,watchdog-timers = <&timer10>; + resets = <&prm_dsp1 0>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + firmware-name = "dra7-dsp1-fw.xe66"; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index b3f57d81f007..92922d3afd14 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -29,6 +29,8 @@ required: - reg - "#reset-cells" +additionalProperties: false + examples: - | reset-controller@c884404 { diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml index 411bd76f1b64..512a33bdb208 100644 --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml @@ -28,6 +28,8 @@ required: - reg - "#reset-cells" +additionalProperties: false + examples: - | reset-controller@8b2c800 { diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt deleted file mode 100644 index de7f06ccd003..000000000000 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ /dev/null @@ -1,48 +0,0 @@ -DT bindings for the Renesas R-Car and RZ/G Reset Controllers - -The R-Car and RZ/G Reset Controllers provide reset control, and implement the -following functions: - - Latching of the levels on mode pins when PRESET# is negated, - - Mode monitoring register, - - Reset control of peripheral devices (on R-Car Gen1), - - Watchdog timer (on R-Car Gen1), - - Register-based reset control and boot address registers for the various CPU - cores (on R-Car Gen2 and Gen3, and on RZ/G). - - -Required properties: - - compatible: Should be - - "renesas,<soctype>-reset-wdt" for R-Car Gen1, - - "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G - Examples with soctypes are: - - "renesas,r8a7743-rst" (RZ/G1M) - - "renesas,r8a7744-rst" (RZ/G1N) - - "renesas,r8a7745-rst" (RZ/G1E) - - "renesas,r8a77470-rst" (RZ/G1C) - - "renesas,r8a774a1-rst" (RZ/G2M) - - "renesas,r8a774b1-rst" (RZ/G2N) - - "renesas,r8a774c0-rst" (RZ/G2E) - - "renesas,r8a7778-reset-wdt" (R-Car M1A) - - "renesas,r8a7779-reset-wdt" (R-Car H1) - - "renesas,r8a7790-rst" (R-Car H2) - - "renesas,r8a7791-rst" (R-Car M2-W) - - "renesas,r8a7792-rst" (R-Car V2H - - "renesas,r8a7793-rst" (R-Car M2-N) - - "renesas,r8a7794-rst" (R-Car E2) - - "renesas,r8a7795-rst" (R-Car H3) - - "renesas,r8a7796-rst" (R-Car M3-W) - - "renesas,r8a77961-rst" (R-Car M3-W+) - - "renesas,r8a77965-rst" (R-Car M3-N) - - "renesas,r8a77970-rst" (R-Car V3M) - - "renesas,r8a77980-rst" (R-Car V3H) - - "renesas,r8a77990-rst" (R-Car E3) - - "renesas,r8a77995-rst" (R-Car D3) - - reg: Address start and address range for the device. - - -Example: - - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7795-rst"; - reg = <0 0xe6160000 0 0x0200>; - }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml new file mode 100644 index 000000000000..b5de1d196a13 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/renesas,rst.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car and RZ/G Reset Controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The R-Car and RZ/G Reset Controllers provide reset control, and implement the + following functions: + - Latching of the levels on mode pins when PRESET# is negated, + - Mode monitoring register, + - Reset control of peripheral devices (on R-Car Gen1), + - Watchdog timer (on R-Car Gen1), + - Register-based reset control and boot address registers for the various + CPU cores (on R-Car Gen2 and Gen3, and on RZ/G). + +properties: + compatible: + enum: + - renesas,r8a7743-rst # RZ/G1M + - renesas,r8a7744-rst # RZ/G1N + - renesas,r8a7745-rst # RZ/G1E + - renesas,r8a77470-rst # RZ/G1C + - renesas,r8a774a1-rst # RZ/G2M + - renesas,r8a774b1-rst # RZ/G2N + - renesas,r8a774c0-rst # RZ/G2E + - renesas,r8a7778-reset-wdt # R-Car M1A + - renesas,r8a7779-reset-wdt # R-Car H1 + - renesas,r8a7790-rst # R-Car H2 + - renesas,r8a7791-rst # R-Car M2-W + - renesas,r8a7792-rst # R-Car V2H + - renesas,r8a7793-rst # R-Car M2-N + - renesas,r8a7794-rst # R-Car E2 + - renesas,r8a7795-rst # R-Car H3 + - renesas,r8a7796-rst # R-Car M3-W + - renesas,r8a77961-rst # R-Car M3-W+ + - renesas,r8a77965-rst # R-Car M3-N + - renesas,r8a77970-rst # R-Car V3M + - renesas,r8a77980-rst # R-Car V3H + - renesas,r8a77990-rst # R-Car E3 + - renesas,r8a77995-rst # R-Car D3 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7795-rst"; + reg = <0xe6160000 0x0200>; + }; diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml index a9ff3cb35c5e..444be32a8a29 100644 --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml @@ -29,6 +29,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | rng@c8834000 { diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt deleted file mode 100644 index aaac7975f61c..000000000000 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt +++ /dev/null @@ -1,40 +0,0 @@ -BCM2835/6368 Random number generator - -Required properties: - -- compatible : should be one of - "brcm,bcm2835-rng" - "brcm,bcm-nsp-rng" - "brcm,bcm5301x-rng" or - "brcm,bcm6368-rng" -- reg : Specifies base physical address and size of the registers. - -Optional properties: - -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "ipsec" as a clock name - -Optional properties: - -- interrupts: specify the interrupt for the RNG block - -Example: - -rng { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - interrupts = <2 29>; -}; - -rng@18033000 { - compatible = "brcm,bcm-nsp-rng"; - reg = <0x18033000 0x14>; -}; - -random: rng@10004180 { - compatible = "brcm,bcm6368-rng"; - reg = <0x10004180 0x14>; - - clocks = <&periph_clk 18>; - clock-names = "ipsec"; -}; diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml new file mode 100644 index 000000000000..89ab67f20a7f --- /dev/null +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/brcm,bcm2835.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835/6368 Random number generator + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + - Florian Fainelli <f.fainelli@gmail.com> + - Herbert Xu <herbert@gondor.apana.org.au> + +properties: + compatible: + enum: + - brcm,bcm2835-rng + - brcm,bcm-nsp-rng + - brcm,bcm5301x-rng + - brcm,bcm6368-rng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipsec + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rng { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + interrupts = <2 29>; + }; + + - | + rng@18033000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x18033000 0x14>; + }; + + - | + rng@10004180 { + compatible = "brcm,bcm6368-rng"; + reg = <0x10004180 0x14>; + + clocks = <&periph_clk 18>; + clock-names = "ipsec"; + }; diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt deleted file mode 100644 index 41c7ae18fd7b..000000000000 --- a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt +++ /dev/null @@ -1,37 +0,0 @@ -JZ4740 and similar SoCs real-time clock driver - -Required properties: - -- compatible: One of: - - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC - - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC -- reg: Address range of rtc register set -- interrupts: IRQ number for the alarm interrupt -- clocks: phandle to the "rtc" clock -- clock-names: must be "rtc" - -Optional properties: -- system-power-controller: To use this component as the - system power controller -- reset-pin-assert-time-ms: Reset pin low-level assertion - time after wakeup (default 60ms; range 0-125ms if RTC clock - at 32 kHz) -- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion - time (default 100ms; range 0-2s if RTC clock at 32 kHz) - -Example: - -rtc@10003000 { - compatible = "ingenic,jz4740-rtc"; - reg = <0x10003000 0x40>; - - interrupt-parent = <&intc>; - interrupts = <32>; - - clocks = <&rtc_clock>; - clock-names = "rtc"; - - system-power-controller; - reset-pin-assert-time-ms = <60>; - min-wakeup-pin-assert-time-ms = <100>; -}; diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml new file mode 100644 index 000000000000..4206bf8a2469 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs Real-Time Clock DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4740-rtc + - ingenic,jz4760-rtc + - items: + - const: ingenic,jz4725b-rtc + - const: ingenic,jz4740-rtc + - items: + - enum: + - ingenic,jz4770-rtc + - ingenic,jz4780-rtc + - const: ingenic,jz4760-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: rtc + + system-power-controller: + description: | + Indicates that the RTC is responsible for powering OFF + the system. + type: boolean + + ingenic,reset-pin-assert-time-ms: + minimum: 0 + maximum: 125 + default: 60 + description: | + Reset pin low-level assertion time after wakeup + (assuming RTC clock at 32 kHz) + + ingenic,min-wakeup-pin-assert-time-ms: + minimum: 0 + maximum: 2000 + default: 100 + description: | + Minimum wakeup pin assertion time + (assuming RTC clock at 32 kHz) + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + rtc_dev: rtc@10003000 { + compatible = "ingenic,jz4740-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <15>; + + clocks = <&cgu JZ4740_CLK_RTC>; + clock-names = "rtc"; + }; diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml index dcff573cbdb1..b95cb017f469 100644 --- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml @@ -51,6 +51,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/r7s72100-clock.h> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt new file mode 100644 index 000000000000..c33d87e5e753 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt @@ -0,0 +1,14 @@ +Device-Tree bindings for MediaTek SoC based RTC + +Required properties: +- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC +- reg : Specifies base physical address and size of the registers; +- interrupts : Should contain the interrupt for RTC alarm; + +Example: + +rtc: rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0 0x10011000 0 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 0a54296d7218..48c6cafca90c 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -111,6 +111,8 @@ required: - clocks - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/mfd/stm32f4-rcc.h> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 214fe8beddc3..d4178ab0d675 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -62,6 +62,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | serial@84c0 { diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index c8d677f9491f..9582fc2279ed 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -19,7 +19,7 @@ Optional properties: the transceiver is actually CTS_B, not RTS_B. CTS_B is always output, and RTS_B is input, regardless of dte-mode. -Please check Documentation/devicetree/bindings/serial/serial.txt +Please check Documentation/devicetree/bindings/serial/serial.yaml for the complete list of generic properties. Note: Each uart controller should have an alias correctly numbered diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml new file mode 100644 index 000000000000..91101521ef07 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,hscif-r8a7778 # R-Car M1 + - renesas,hscif-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-hscif # R-Car Gen1 + - const: renesas,hscif # generic HSCIF compatible UART + + - items: + - enum: + - renesas,hscif-r8a7743 # RZ/G1M + - renesas,hscif-r8a7744 # RZ/G1N + - renesas,hscif-r8a7745 # RZ/G1E + - renesas,hscif-r8a77470 # RZ/G1C + - renesas,hscif-r8a7790 # R-Car H2 + - renesas,hscif-r8a7791 # R-Car M2-W + - renesas,hscif-r8a7792 # R-Car V2H + - renesas,hscif-r8a7793 # R-Car M2-N + - renesas,hscif-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1 + - const: renesas,hscif # generic HSCIF compatible UART + + - items: + - enum: + - renesas,hscif-r8a774a1 # RZ/G2M + - renesas,hscif-r8a774b1 # RZ/G2N + - renesas,hscif-r8a774c0 # RZ/G2E + - renesas,hscif-r8a7795 # R-Car H3 + - renesas,hscif-r8a7796 # R-Car M3-W + - renesas,hscif-r8a77961 # R-Car M3-W+ + - renesas,hscif-r8a77965 # R-Car M3-N + - renesas,hscif-r8a77970 # R-Car V3M + - renesas,hscif-r8a77980 # R-Car V3H + - renesas,hscif-r8a77990 # R-Car E3 + - renesas,hscif-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 + - const: renesas,hscif # generic HSCIF compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: + - fck # UART functional clock + - hsck # optional external clock input + - brg_int # optional internal clock source for BRG frequency divider + - scif_clk # optional external clock source for BRG frequency divider + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-hscif + - renesas,rcar-gen3-hscif +then: + required: + - resets + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + aliases { + serial1 = &hscif1; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0xe6550000 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 519>; + uart-has-rtscts; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt deleted file mode 100644 index a5edf4b70c7a..000000000000 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ /dev/null @@ -1,150 +0,0 @@ -* Renesas SH-Mobile Serial Communication Interface - -Required properties: - - - compatible: Must contain one or more of the following: - - - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART. - - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART. - - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. - - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. - - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. - - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. - - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. - - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. - - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. - - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART. - - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART. - - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART. - - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART. - - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. - - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. - - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. - - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. - - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. - - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART. - - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART. - - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. - - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART. - - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART. - - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. - - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. - - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. - - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART. - - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART. - - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART. - - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART. - - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART. - - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART. - - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART. - - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART. - - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART. - - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART. - - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART. - - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART. - - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART. - - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART. - - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART. - - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART. - - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART. - - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART. - - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART. - - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART. - - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART. - - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. - - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART. - - "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART. - - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART. - - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART. - - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, - - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART, - - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART, - - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART, - - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART, - - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, - - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART, - - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART, - - "renesas,scif" for generic SCIF compatible UART. - - "renesas,scifa" for generic SCIFA compatible UART. - - "renesas,scifb" for generic SCIFB compatible UART. - - "renesas,hscif" for generic HSCIF compatible UART. - - "renesas,sci" for generic SCI compatible UART. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - - - reg: Base address and length of the I/O registers used by the UART. - - interrupts: Must contain one or more interrupt-specifiers for the SCIx. - If a single interrupt is expressed, then all events are - multiplexed into this single interrupt. - - If multiple interrupts are provided by the hardware, the order - in which the interrupts are listed must match order below. Note - that some HW interrupt events may be muxed together resulting - in duplicate entries. - The interrupt order is as follows: - 1. Error (ERI) - 2. Receive buffer full (RXI) - 3. Transmit buffer empty (TXI) - 4. Break (BRI) - 5. Data Ready (DRI) - 6. Transmit End (TEI) - - - clocks: Must contain a phandle and clock-specifier pair for each entry - in clock-names. - - clock-names: Must contain "fck" for the SCIx UART functional clock. - Apart from the divided functional clock, there may be other possible - sources for the sampling clock, depending on SCIx variant. - On (H)SCI(F) and some SCIFA, an additional clock may be specified: - - "hsck" for the optional external clock input (on HSCIF), - - "sck" for the optional external clock input (on other variants). - On UARTs equipped with a Baud Rate Generator for External Clock (BRG) - (some SCIF and HSCIF), additional clocks may be specified: - - "brg_int" for the optional internal clock source for the frequency - divider (typically the (AXI or SHwy) bus clock), - - "scif_clk" for the optional external clock source for the frequency - divider (SCIF_CLK). - -Note: Each enabled SCIx UART may have an optional "serialN" alias in the -"aliases" node. - -Optional properties: - - dmas: Must contain a list of two references to DMA specifiers, one for - transmission, and one for reception. - - dma-names: Must contain a list of two DMA names, "tx" and "rx". - - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the - generic serial DT bindings in serial.txt. - - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow - control, cfr. the generic serial DT bindings in serial.txt. - -Example: - aliases { - serial0 = &scifa0; - }; - - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupt-parent = <&gic>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml new file mode 100644 index 000000000000..4183b7311f37 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communication Interface + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: renesas,sci + + reg: + maxItems: 1 + + interrupts: + items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Transmit end interrupt + + interrupt-names: + items: + - const: eri + - const: rxi + - const: txi + - const: tei + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - fck # UART functional clock + - sck # optional external clock input + + uart-has-rtscts: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + aliases { + serial0 = &sci0; + }; + + sci0: serial@ffff78 { + compatible = "renesas,sci"; + reg = <0xffff78 8>; + interrupts = <88 0>, <89 0>, <90 0>, <91 0>; + clocks = <&fclk>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml new file mode 100644 index 000000000000..70392b9bd977 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communication Interface with FIFO (SCIF) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scif-r7s72100 # RZ/A1H + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r7s9210 # RZ/A2 + + - items: + - enum: + - renesas,scif-r8a7778 # R-Car M1 + - renesas,scif-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-scif # R-Car Gen1 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r8a7743 # RZ/G1M + - renesas,scif-r8a7744 # RZ/G1N + - renesas,scif-r8a7745 # RZ/G1E + - renesas,scif-r8a77470 # RZ/G1C + - renesas,scif-r8a7790 # R-Car H2 + - renesas,scif-r8a7791 # R-Car M2-W + - renesas,scif-r8a7792 # R-Car V2H + - renesas,scif-r8a7793 # R-Car M2-N + - renesas,scif-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r8a774a1 # RZ/G2M + - renesas,scif-r8a774b1 # RZ/G2N + - renesas,scif-r8a774c0 # RZ/G2E + - renesas,scif-r8a7795 # R-Car H3 + - renesas,scif-r8a7796 # R-Car M3-W + - renesas,scif-r8a77961 # R-Car M3-W+ + - renesas,scif-r8a77965 # R-Car M3-N + - renesas,scif-r8a77970 # R-Car V3M + - renesas,scif-r8a77980 # R-Car V3H + - renesas,scif-r8a77990 # R-Car E3 + - renesas,scif-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 + - const: renesas,scif # generic SCIF compatible UART + + reg: + maxItems: 1 + + interrupts: + oneOf: + - items: + - description: A combined interrupt + - items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Transmit End interrupt + - items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Break interrupt + - description: Data Ready interrupt + - description: Transmit End interrupt + + interrupt-names: + oneOf: + - items: + - const: eri + - const: rxi + - const: txi + - const: tei + - items: + - const: eri + - const: rxi + - const: txi + - const: bri + - const: dri + - const: tei + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: + - fck # UART functional clock + - sck # optional external clock input + - brg_int # optional internal clock source for BRG frequency divider + - scif_clk # optional external clock source for BRG frequency divider + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scif + - renesas,rcar-gen3-scif +then: + required: + - resets + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + aliases { + serial0 = &scif0; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0xe6e60000 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 721>; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml new file mode 100644 index 000000000000..b28bcb268854 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communications Interface with FIFO A (SCIFA) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scifa-r8a73a4 # R-Mobile APE6 + - renesas,scifa-r8a7740 # R-Mobile A1 + - renesas,scifa-sh73a0 # SH-Mobile AG5 + - const: renesas,scifa # generic SCIFA compatible UART + + - items: + - enum: + - renesas,scifa-r8a7743 # R8A7743 RZ/G1M + - renesas,scifa-r8a7744 # R8A7744 RZ/G1N + - renesas,scifa-r8a7745 # R8A7745 RZ/G1E + - renesas,scifa-r8a7790 # R8A7790 R-Car H2 + - renesas,scifa-r8a7791 # R8A7791 R-Car M2-W + - renesas,scifa-r8a7793 # R8A7793 R-Car M2-N + - renesas,scifa-r8a7794 # R8A7794 R-Car E2 + - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1 + - const: renesas,scifa # generic SCIFA compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - fck # UART functional clock + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scifa +then: + required: + - resets + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + aliases { + serial0 = &scifa0; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa", + "renesas,scifa"; + reg = <0xe6c40000 64>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 204>; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml new file mode 100644 index 000000000000..57205cb1dcd4 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communications Interface with FIFO B (SCIFB) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scifb-r8a73a4 # R-Mobile APE6 + - renesas,scifb-r8a7740 # R-Mobile A1 + - renesas,scifb-sh73a0 # SH-Mobile AG5 + - const: renesas,scifb # generic SCIFB compatible UART + + - items: + - enum: + - renesas,scifb-r8a7743 # RZ/G1M + - renesas,scifb-r8a7744 # RZ/G1N + - renesas,scifb-r8a7745 # RZ/G1E + - renesas,scifb-r8a7790 # R-Car H2 + - renesas,scifb-r8a7791 # R-Car M2-W + - renesas,scifb-r8a7793 # R-Car M2-N + - renesas,scifb-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1 + - const: renesas,scifb # generic SCIFB compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - fck # UART functional clock + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scifb +then: + required: + - resets + +examples: + - | + #include <dt-bindings/clock/r8a7740-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + scifb: serial@e6c30000 { + compatible = "renesas,scifb-r8a7740", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; + clock-names = "fck"; + power-domains = <&pd_a3sp>; + }; diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt deleted file mode 100644 index 863c2893759e..000000000000 --- a/Documentation/devicetree/bindings/serial/serial.txt +++ /dev/null @@ -1,56 +0,0 @@ -Generic Serial DT Bindings - -This document lists a set of generic properties for describing UARTs in a -device tree. Whether these properties apply to a particular device depends on -the DT bindings for the actual device. - -Optional properties: - - cts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's CTS line. - - dcd-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's DCD line. - - dsr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's DSR line. - - dtr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's DTR line. - - rng-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's RNG line. - - rts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's RTS line. - - - uart-has-rtscts: The presence of this property indicates that the - UART has dedicated lines for RTS/CTS hardware flow control, and that - they are available for use (wired and enabled by pinmux configuration). - This depends on both the UART hardware and the board wiring. - Note that this property is mutually-exclusive with "cts-gpios" and - "rts-gpios" above, unless support is provided to switch between modes - dynamically. - - -Examples: - - uart1: serial@48022000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - reg = <0x48022000 0x2000>; - interrupts = <73>; - dmas = <&edma 28 0>, <&edma 29 0>; - dma-names = "tx", "rx"; - dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; - dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; - rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - - scifa4: serial@e6c80000 { - compatible = "renesas,scifa-sh73a0", "renesas,scifa"; - reg = <0xe6c80000 0x100>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; - clock-names = "fck"; - power-domains = <&pd_a3sp>; - uart-has-rtscts; - }; diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml new file mode 100644 index 000000000000..53204d90d0c7 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/serial.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Serial Interface Generic DT Bindings + +maintainers: + - Rob Herring <robh@kernel.org> + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + This document lists a set of generic properties for describing UARTs in a + device tree. Whether these properties apply to a particular device depends + on the DT bindings for the actual device. + + Each enabled UART may have an optional "serialN" alias in the "aliases" node, + where N is the port number (non-negative decimal integer) as printed on the + label next to the physical port. + +properties: + $nodename: + pattern: "^serial(@.*)?$" + + cts-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's CTS line. + + dcd-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's DCD line. + + dsr-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's DSR line. + + dtr-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's DTR line. + + rng-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's RNG line. + + rts-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's RTS line. + + uart-has-rtscts: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the UART has dedicated lines + for RTS/CTS hardware flow control, and that they are available for use + (wired and enabled by pinmux configuration). This depends on both the + UART hardware and the board wiring. + +if: + required: + - uart-has-rtscts +then: + properties: + cts-gpios: false + rts-gpios: false + +patternProperties: + ".*": + if: + type: object + then: + description: + Serial attached devices shall be a child node of the host UART device + the slave device is attached to. It is expected that the attached + device is the only child node of the UART device. The slave device node + name shall reflect the generic type of device for the node. + + properties: + compatible: + description: + Compatible of the device connected to the serial port. + + max-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The maximum baud rate the device operates at. + This should only be present if the maximum is less than the slave + device can support. For example, a particular board has some + signal quality issue or the host processor can't support higher + baud rates. + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The current baud rate the device operates at. + This should only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no way to reset + the device + * device baud rate is configured by its firmware but there is no + way to request the actual settings + + required: + - compatible + +examples: + - | + serial@1234 { + compatible = "ns16550a"; + reg = <0x1234 0x20>; + interrupts = <1>; + + bluetooth { + compatible = "brcm,bcm43341-bt"; + interrupt-parent = <&gpio>; + interrupts = <10>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt deleted file mode 100644 index 40110e019620..000000000000 --- a/Documentation/devicetree/bindings/serial/slave-device.txt +++ /dev/null @@ -1,45 +0,0 @@ -Serial Slave Device DT binding - -This documents the binding structure and common properties for serial -attached devices. Common examples include Bluetooth, WiFi, NFC and GPS -devices. - -Serial attached devices shall be a child node of the host UART device the -slave device is attached to. It is expected that the attached device is -the only child node of the UART device. The slave device node name shall -reflect the generic type of device for the node. - -Required Properties: - -- compatible : A string reflecting the vendor and specific device the node - represents. - -Optional Properties: - -- max-speed : The maximum baud rate the device operates at. This should - only be present if the maximum is less than the slave device - can support. For example, a particular board has some signal - quality issue or the host processor can't support higher - baud rates. -- current-speed : The current baud rate the device operates at. This should - only be present in case a driver has no chance to know - the baud rate of the slave device. - Examples: - * device supports auto-baud - * the rate is setup by a bootloader and there is no - way to reset the device - * device baud rate is configured by its firmware but - there is no way to request the actual settings - -Example: - -serial@1234 { - compatible = "ns16550a"; - interrupts = <1>; - - bluetooth { - compatible = "brcm,bcm43341-bt"; - interrupt-parent = <&gpio>; - interrupts = <10>; - }; -}; diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index b42002542690..b962f8db4ce9 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -27,6 +27,7 @@ properties: - rockchip,rk3066-uart - rockchip,rk3188-uart - rockchip,rk3288-uart + - rockchip,rk3308-uart - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml new file mode 100644 index 000000000000..09a30300850c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/socionext,uniphier-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier UART controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + const: socionext,uniphier-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + auto-flow-control: + description: enable automatic flow control support. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + aliases { + serial0 = &serial0; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + }; diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt deleted file mode 100644 index 7a1bf02bb869..000000000000 --- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt +++ /dev/null @@ -1,22 +0,0 @@ -UniPhier UART controller - -Required properties: -- compatible: should be "socionext,uniphier-uart". -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: --auto-flow-control: enable automatic flow control support. - -Example: - aliases { - serial0 = &serial0; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - reg = <0x54006800 0x40>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - }; diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index f548594d020b..cb008fd188d8 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -40,6 +40,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | canvas: video-lut@48 { diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml new file mode 100644 index 000000000000..3cbf2d28a188 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX AHB to IP Bridge + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + This particular peripheral is designed as the bridge between + AHB bus and peripherals with the lower bandwidth IP Slave (IPS) + buses. + +select: + properties: + compatible: + contains: + const: fsl,aips-bus + required: + - compatible + +properties: + compatible: + items: + - const: fsl,aips-bus + - const: simple-bus + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; +... diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 7a32404c6114..ecac2bbeae45 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -20,6 +20,7 @@ Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs "mediatek,mt6765-pwrap" for MT6765 SoCs + "mediatek,mt6779-pwrap" for MT6779 SoCs "mediatek,mt6797-pwrap" for MT6797 SoCs "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt index db501269f47b..f8fa71f5d84b 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt @@ -45,6 +45,18 @@ by the individual bindings for the specific service 12 - Ultrasound stream manager. 13 - Listen stream manager. +- qcom,protection-domain + Usage: optional + Value type: <stringlist> + Definition: Must list the protection domain service name and path + that the particular apr service has a dependency on. + Possible values are : + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + = EXAMPLE The following example represents a QDSP based sound card on a MSM8996 device which uses apr as communication between Apps and QDSP. @@ -82,3 +94,41 @@ which uses apr as communication between Apps and QDSP. ... }; }; + += EXAMPLE 2 +The following example represents a QDSP based sound card with protection domain +dependencies specified. Here some of the apr services are dependent on services +running on protection domain hosted on ADSP/SLPI remote processors while others +have no such dependency. + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + + q6core { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + }; + + q6afe: q6afe { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + ... + }; + + q6asm: q6asm { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd"; + ... + }; + + q6adm: q6adm { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + ... + }; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 75e0cbe6be70..76ee695097bf 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -59,6 +59,8 @@ required: - iovdd-supply - dvdd-supply +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml new file mode 100644 index 000000000000..a61bccf915d8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,aiu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic AIU audio output controller + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + $nodename: + pattern: "^audio-controller@.*" + + "#sound-dai-cells": + const: 2 + + compatible: + items: + - enum: + - amlogic,aiu-gxbb + - amlogic,aiu-gxl + - amlogic,aiu-meson8 + - amlogic,aiu-meson8b + - const: + amlogic,aiu + + clocks: + items: + - description: AIU peripheral clock + - description: I2S peripheral clock + - description: I2S output clock + - description: I2S master clock + - description: I2S mixer clock + - description: SPDIF peripheral clock + - description: SPDIF output clock + - description: SPDIF master clock + - description: SPDIF master clock multiplexer + + clock-names: + items: + - const: pclk + - const: i2s_pclk + - const: i2s_aoclk + - const: i2s_mclk + - const: i2s_mixer + - const: spdif_pclk + - const: spdif_aoclk + - const: spdif_mclk + - const: spdif_mclk_sel + + interrupts: + items: + - description: I2S interrupt line + - description: SPDIF interrupt line + + interrupt-names: + items: + - const: i2s + - const: spdif + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - reg + - resets + +examples: + - | + #include <dt-bindings/clock/gxbb-clkc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> + + aiu: audio-controller@5400 { + compatible = "amlogic,aiu-gxl", "amlogic,aiu"; + #sound-dai-cells = <2>; + reg = <0x0 0x5400 0x0 0x2ac>; + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "i2s", "spdif"; + clocks = <&clkc CLKID_AIU_GLUE>, + <&clkc CLKID_I2S_OUT>, + <&clkc CLKID_AOCLK_GATE>, + <&clkc CLKID_CTS_AMCLK>, + <&clkc CLKID_MIXER_IFACE>, + <&clkc CLKID_IEC958>, + <&clkc CLKID_IEC958_GATE>, + <&clkc CLKID_CTS_MCLK_I958>, + <&clkc CLKID_CTS_I958>; + clock-names = "pclk", + "i2s_pclk", + "i2s_aoclk", + "i2s_mclk", + "i2s_mixer", + "spdif_pclk", + "spdif_aoclk", + "spdif_mclk", + "spdif_mclk_sel"; + resets = <&reset RESET_AIU>; + }; + diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml new file mode 100644 index 000000000000..f778d3371fde --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,g12a-toacodec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic G12a Internal DAC Control Glue + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + $nodename: + pattern: "^audio-controller@.*" + + "#sound-dai-cells": + const: 1 + + compatible: + oneOf: + - items: + - const: + amlogic,g12a-toacodec + - items: + - enum: + - amlogic,sm1-toacodec + - const: + amlogic,g12a-toacodec + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - resets + +examples: + - | + #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + + toacodec: audio-controller@740 { + compatible = "amlogic,g12a-toacodec"; + reg = <0x0 0x740 0x0 0x4>; + #sound-dai-cells = <1>; + resets = <&clkc_audio AUD_RESET_TOACODEC>; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml new file mode 100644 index 000000000000..fb374c659be1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic GX sound card + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + items: + - const: amlogic,gx-sound-card + + audio-aux-devs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: list of auxiliary devices + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + minItems: 2 + description: |- + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + audio-widgets: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + minItems: 2 + description: |- + A list off component DAPM widget. Each entry is a pair of strings, + the first being the widget type, the second being the widget name + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + +patternProperties: + "^dai-link-[0-9]+$": + type: object + description: |- + dai-link child nodes: + Container for dai-link level properties and the CODEC sub-nodes. + There should be at least one (and probably more) subnode of this type + + properties: + dai-format: + $ref: /schemas/types.yaml#/definitions/string + enum: [ i2s, left-j, dsp_a ] + + mclk-fs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: |- + Multiplication factor between the frame rate and master clock + rate + + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of the CPU DAI + + patternProperties: + "^codec-[0-9]+$": + type: object + description: |- + Codecs: + dai-link representing backend links should have at least one subnode. + One subnode for each codec of the dai-link. dai-link representing + frontend links have no codec, therefore have no subnodes + + properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of the codec DAI + + required: + - sound-dai + + required: + - sound-dai + +required: + - model + - dai-link-0 + +examples: + - | + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXL-ACME-S905X-FOO"; + audio-aux-devs = <&>; + audio-routing = "I2S ENCODER I2S IN", "I2S FIFO Playback"; + + dai-link-0 { + sound-dai = <&i2s_fifo>; + }; + + dai-link-1 { + sound-dai = <&i2s_encoder>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&codec0>; + }; + + codec-1 { + sound-dai = <&codec1>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml new file mode 100644 index 000000000000..b7c38c2b5b54 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,t9015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic T9015 Internal Audio DAC + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + $nodename: + pattern: "^audio-controller@.*" + + "#sound-dai-cells": + const: 0 + + compatible: + items: + - const: amlogic,t9015 + + clocks: + items: + - description: Peripheral clock + + clock-names: + items: + - const: pclk + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - clocks + - clock-names + - resets + +examples: + - | + #include <dt-bindings/clock/g12a-clkc.h> + #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> + + acodec: audio-controller@32000 { + compatible = "amlogic,t9015"; + reg = <0x0 0x32000 0x0 0x14>; + #sound-dai-cells = <0>; + clocks = <&clkc CLKID_AUDIO_CODEC>; + clock-names = "pclk"; + resets = <&reset RESET_AUDIO_CODEC>; + }; + diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt new file mode 100644 index 000000000000..007f524b4d15 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt @@ -0,0 +1,29 @@ +Broadcom DSL/PON BCM63xx Audio I2S controller + +Required properties: +- compatible: Should be "brcm,bcm63xx-i2s". +- #address-cells: 32bit valued, 1 cell. +- #size-cells: 32bit valued, 0 cell. +- reg: Should contain audio registers location and length +- interrupts: Should contain the interrupt for the controller. +- clocks: Must contain an entry for each entry in clock-names. + Please refer to clock-bindings.txt. +- clock-names: One of each entry matching the clocks phandles list: + - "i2sclk" (generated clock) Required. + - "i2sosc" (fixed 200MHz clock) Required. + +(1) : The generated clock is required only when any of TX and RX + works on Master Mode. +(2) : The fixed 200MHz clock is from internal chip and always on + +Example: + + i2s: bcm63xx-i2s { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63xx-i2s"; + reg = <0xFF802080 0xFF>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2sclk>, <&osc>; + clock-names = "i2sclk","i2sosc"; + }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml new file mode 100644 index 000000000000..efce847a3408 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CS42L51 audio codec DT bindings + +maintainers: + - Olivier Moysan <olivier.moysan@st.com> + +properties: + compatible: + const: cirrus,cs42l51 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: MCLK + + reset-gpios: + maxItems: 1 + + VL-supply: + description: phandle to voltage regulator of digital interface section + + VD-supply: + description: phandle to voltage regulator of digital internal section + + VA-supply: + description: phandle to voltage regulator of analog internal section + + VAHP-supply: + description: phandle to voltage regulator of headphone + +required: + - compatible + - reg + - "#sound-dai-cells" + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + clocks = <&mclk_prov>; + clock-names = "MCLK"; + VL-supply = <®_audio>; + VD-supply = <®_audio>; + VA-supply = <®_audio>; + VAHP-supply = <®_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt deleted file mode 100644 index acbd68ddd2cb..000000000000 --- a/Documentation/devicetree/bindings/sound/cs42l51.txt +++ /dev/null @@ -1,33 +0,0 @@ -CS42L51 audio CODEC - -Required properties: - - - compatible : "cirrus,cs42l51" - - - reg : the I2C address of the device for I2C. - -Optional properties: - - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt. - - - reset-gpios : GPIO specification for the reset pin. If specified, it will be - deasserted before starting the communication with the codec. - - - clocks : a list of phandles + clock-specifiers, one for each entry in - clock-names - - - clock-names : must contain "MCLK" - -Example: - -cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - clocks = <&mclk_prov>; - clock-names = "MCLK"; - VL-supply = <®_audio>; - VD-supply = <®_audio>; - VA-supply = <®_audio>; - VAHP-supply = <®_audio>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt deleted file mode 100644 index 8ca52dcc5572..000000000000 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt +++ /dev/null @@ -1,44 +0,0 @@ -Audio codec controlled by ChromeOS EC - -Google's ChromeOS EC codec is a digital mic codec provided by the -Embedded Controller (EC) and is controlled via a host-command interface. - -An EC codec node should only be found as a sub-node of the EC node (see -Documentation/devicetree/bindings/mfd/cros-ec.txt). - -Required properties: -- compatible: Must contain "google,cros-ec-codec" -- #sound-dai-cells: Should be 1. The cell specifies number of DAIs. - -Optional properties: -- reg: Pysical base address and length of shared memory region from EC. - It contains 3 unsigned 32-bit integer. The first 2 integers - combine to become an unsigned 64-bit physical address. The last - one integer is length of the shared memory. -- memory-region: Shared memory region to EC. A "shared-dma-pool". See - ../reserved-memory/reserved-memory.txt for details. - -Example: - -{ - ... - - reserved_mem: reserved_mem { - compatible = "shared-dma-pool"; - reg = <0 0x52800000 0 0x100000>; - no-map; - }; -} - -cros-ec@0 { - compatible = "google,cros-ec-spi"; - - ... - - cros_ec_codec: ec-codec { - compatible = "google,cros-ec-codec"; - #sound-dai-cells = <1>; - reg = <0x0 0x10500000 0x80000>; - memory-region = <&reserved_mem>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml new file mode 100644 index 000000000000..c84e656afb0a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/google,cros-ec-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio codec controlled by ChromeOS EC + +maintainers: + - Cheng-Yi Chiang <cychiang@chromium.org> + +description: | + Google's ChromeOS EC codec is a digital mic codec provided by the + Embedded Controller (EC) and is controlled via a host-command interface. + An EC codec node should only be found as a sub-node of the EC node (see + Documentation/devicetree/bindings/mfd/cros-ec.txt). + +properties: + compatible: + const: google,cros-ec-codec + + "#sound-dai-cells": + const: 1 + + reg: + items: + - description: | + Physical base address and length of shared memory region from EC. + It contains 3 unsigned 32-bit integer. The first 2 integers + combine to become an unsigned 64-bit physical address. + The last one integer is the length of the shared memory. + + memory-region: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Shared memory region to EC. A "shared-dma-pool". + See ../reserved-memory/reserved-memory.txt for details. + +required: + - compatible + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + reserved_mem: reserved-mem@52800000 { + compatible = "shared-dma-pool"; + reg = <0x52800000 0x100000>; + no-map; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + cros-ec@0 { + compatible = "google,cros-ec-spi"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0>; + cros_ec_codec: ec-codec@10500000 { + compatible = "google,cros-ec-codec"; + #sound-dai-cells = <1>; + reg = <0x0 0x10500000 0x80000>; + memory-region = <&reserved_mem>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml new file mode 100644 index 000000000000..44f49bebb267 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^audio-controller@' + + compatible: + oneOf: + - enum: + - ingenic,jz4740-i2s + - ingenic,jz4760-i2s + - ingenic,jz4770-i2s + - ingenic,jz4780-i2s + - items: + - const: ingenic,jz4725b-i2s + - const: ingenic,jz4740-i2s + + '#sound-dai-cells': + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: AIC clock + - description: I2S clock + - description: EXT clock + - description: PLL/2 clock + + clock-names: + items: + - const: aic + - const: i2s + - const: ext + - const: pll half + + dmas: + items: + - description: DMA controller phandle and request line for I2S RX + - description: DMA controller phandle and request line for I2S TX + + dma-names: + items: + - const: rx + - const: tx + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - '#sound-dai-cells' + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + aic: audio-controller@10020000 { + compatible = "ingenic,jz4740-i2s"; + reg = <0x10020000 0x38>; + + #sound-dai-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + clocks = <&cgu JZ4740_CLK_AIC>, + <&cgu JZ4740_CLK_I2S>, + <&cgu JZ4740_CLK_EXT>, + <&cgu JZ4740_CLK_PLL_HALF>; + clock-names = "aic", "i2s", "ext", "pll half"; + + dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt deleted file mode 100644 index b623d50004fb..000000000000 --- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt +++ /dev/null @@ -1,23 +0,0 @@ -Ingenic JZ4740 I2S controller - -Required properties: -- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s" -- reg : I2S registers location and length -- clocks : AIC and I2S PLL clock specifiers. -- clock-names: "aic" and "i2s" -- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels -- dma-names: Must be "tx" and "rx" - -Example: - -i2s: i2s@10020000 { - compatible = "ingenic,jz4740-i2s"; - reg = <0x10020000 0x94>; - - clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>; - clock-names = "aic", "i2s"; - - dmas = <&dma 2>, <&dma 3>; - dma-names = "tx", "rx"; - -}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt index b795d282818d..a8f2b0c56c79 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt @@ -18,6 +18,7 @@ Required properties: * Headphone Jack * Int Spk * Mic Jack + * Int Mic - nvidia,i2s-controller : The phandle of the Tegra I2S1 controller - nvidia,audio-codec : The phandle of the WM8903 audio codec diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index 38eaf0c028f9..a495d5fc0d23 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -139,6 +139,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | codec@1,0{ diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml index 140a37fc3c0b..d1b65554e681 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml @@ -63,6 +63,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | sh_fsi2: sound@ec230000 { diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt index 2469588c7ccb..1ecd75d2032a 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt @@ -10,6 +10,11 @@ Required properties: - clock-names: should be "pclk". - spk-depop-time-ms: speak depop time msec. +Optional properties: + +- mute-gpios: GPIO specifier for external line driver control (typically the + dedicated GPIO_MUTE pin) + Example for rk3328 internal codec: codec: codec@ff410000 { @@ -18,6 +23,6 @@ codec: codec@ff410000 { rockchip,grf = <&grf>; clocks = <&cru PCLK_ACODEC>; clock-names = "pclk"; + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; spk-depop-time-ms = 100; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt deleted file mode 100644 index 54aefab71f2c..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Rockchip I2S controller - -The I2S bus (Inter-IC sound bus) is a serial link for digital -audio data transfer between devices in the system. - -Required properties: - -- compatible: should be one of the following: - - "rockchip,rk3066-i2s": for rk3066 - - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30 - - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 - - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 - - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328 - - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366 - - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368 - - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399 -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the I2S interrupt. -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "tx" and "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain the following: - - "i2s_hclk": clock for I2S BUS - - "i2s_clk" : clock for I2S controller -- rockchip,playback-channels: max playback channels, if not set, 8 channels default. -- rockchip,capture-channels: max capture channels, if not set, 2 channels default. - -Required properties for controller which support multi channels -playback/capture: - -- rockchip,grf: the phandle of the syscon node for GRF register. - -Example for rk3288 I2S controller: - -i2s@ff890000 { - compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; - reg = <0xff890000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&pdma1 0>, <&pdma1 1>; - dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <2>; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml new file mode 100644 index 000000000000..7cd0e278ed85 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip I2S controller + +description: + The I2S bus (Inter-IC sound bus) is a serial link for digital + audio data transfer between devices in the system. + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk3066-i2s + - items: + - enum: + - rockchip,px30-i2s + - rockchip,rk3036-i2s + - rockchip,rk3188-i2s + - rockchip,rk3228-i2s + - rockchip,rk3288-i2s + - rockchip,rk3328-i2s + - rockchip,rk3366-i2s + - rockchip,rk3368-i2s + - rockchip,rk3399-i2s + - const: rockchip,rk3066-i2s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock for I2S controller + - description: clock for I2S BUS + + clock-names: + items: + - const: i2s_clk + - const: i2s_hclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rockchip,capture-channels: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Max capture channels, if not set, 2 channels default. + + rockchip,playback-channels: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + description: + Max playback channels, if not set, 8 channels default. + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + Required property for controllers which support multi channel + playback/capture. + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2s@ff890000 { + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; + reg = <0xff890000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma1 0>, <&pdma1 1>; + dma-names = "tx", "rx"; + rockchip,capture-channels = <2>; + rockchip,playback-channels = <8>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index 30e927a28369..ade1ece8b45f 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -32,6 +32,18 @@ Optional properties: The delay time is realtek,btndet-delay value multiple of 8.192 ms. If absent, the default is 16. +- #clock-cells : Should be set to '<1>', wclk and bclk sources provided. +- clock-output-names : Name given for DAI clocks output. + +- clocks : phandle and clock specifier for codec MCLK. +- clock-names : Clock name string for 'clocks' attribute, should be "mclk". + +- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of + the particular DMIC. + +- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of + the particular DMIC. + Pins on the device (for linking into audio routes) for RT5682: * DMIC L1 @@ -53,4 +65,10 @@ rt5682 { realtek,dmic1-clk-pin = <1>; realtek,jd-src = <1>; realtek,btndet-delay = <16>; + + #clock-cells = <1>; + clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk"; + + clocks = <&osc>; + clock-names = "mclk"; }; diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index c6b244352d05..8ff2d39e7d17 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -69,6 +69,8 @@ required: - cpu - codec +additionalProperties: false + examples: - | sound { diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index 53e3bad4178c..b2ad093d94df 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -115,6 +115,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/exynos-audss-clk.h> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt deleted file mode 100644 index cbf24bcd1b8d..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt +++ /dev/null @@ -1,62 +0,0 @@ -STMicroelectronics STM32 SPI/I2S Controller - -The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode. -Only some SPI instances support I2S. - -Required properties: - - compatible: Must be "st,stm32h7-i2s" - - reg: Offset and length of the device's register set. - - interrupts: Must contain the interrupt line id. - - clocks: Must contain phandle and clock specifier pairs for each entry - in clock-names. - - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k". - "i2sclk": clock which feeds the internal clock generator - "pclk": clock which feeds the peripheral bus interface - "x8k": I2S parent clock for sampling rates multiple of 8kHz. - "x11k": I2S parent clock for sampling rates multiple of 11.025kHz. - - dmas: DMA specifiers for tx and rx dma. - See Documentation/devicetree/bindings/dma/stm32-dma.txt. - - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml - -Optional properties: - - resets: Reference to a reset controller asserting the reset controller - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -sound_card { - compatible = "audio-graph-card"; - dais = <&i2s2_port>; -}; - -i2s2: audio-controller@40003800 { - compatible = "st,stm32h7-i2s"; - reg = <0x40003800 0x400>; - interrupts = <36>; - clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "pclk", "i2sclk", "x8k", "x11k"; - dmas = <&dmamux2 2 39 0x400 0x1>, - <&dmamux2 3 40 0x400 0x1>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s2>; - - i2s2_port: port@0 { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - format = "i2s"; - }; - }; -}; - -audio-codec { - codec_port: port@0 { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml new file mode 100644 index 000000000000..f32410890589 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 SPI/I2S Controller + +maintainers: + - Olivier Moysan <olivier.moysan@st.com> + +description: + The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode. + Only some SPI instances support I2S. + +properties: + compatible: + enum: + - st,stm32h7-i2s + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: clock feeding the peripheral bus interface. + - description: clock feeding the internal clock generator. + - description: I2S parent clock for sampling rates multiple of 8kHz. + - description: I2S parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + - const: pclk + - const: i2sclk + - const: x8k + - const: x11k + + interrupts: + maxItems: 1 + + dmas: + items: + - description: audio capture DMA. + - description: audio playback DMA. + + dma-names: + items: + - const: rx + - const: tx + + resets: + maxItems: 1 + +required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - interrupts + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000b000 0x400>; + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_pins_a>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt deleted file mode 100644 index ca9101777c44..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt +++ /dev/null @@ -1,56 +0,0 @@ -STMicroelectronics STM32 S/PDIF receiver (SPDIFRX). - -The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with -IEC-60958 and IEC-61937. - -Required properties: - - compatible: should be "st,stm32h7-spdifrx" - - reg: cpu DAI IP base address and size - - clocks: must contain an entry for kclk (used as S/PDIF signal reference) - - clock-names: must contain "kclk" - - interrupts: cpu DAI interrupt line - - dmas: DMA specifiers for audio data DMA and iec control flow DMA - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" - -Optional properties: - - resets: Reference to a reset controller asserting the SPDIFRX - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -spdifrx: spdifrx@40004000 { - compatible = "st,stm32h7-spdifrx"; - reg = <0x40004000 0x400>; - clocks = <&rcc SPDIFRX_CK>; - clock-names = "kclk"; - interrupts = <97>; - dmas = <&dmamux1 2 93 0x400 0x0>, - <&dmamux1 3 94 0x400 0x0>; - dma-names = "rx", "rx-ctrl"; - pinctrl-0 = <&spdifrx_pins>; - pinctrl-names = "default"; - - spdifrx_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - }; - }; -}; - -spdif_in: spdif-in { - compatible = "linux,spdif-dir"; - - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; - -soundcard { - compatible = "audio-graph-card"; - dais = <&spdifrx_port>; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml new file mode 100644 index 000000000000..b7f7dc452231 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX) + +maintainers: + - Olivier Moysan <olivier.moysan@st.com> + +description: | + The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with + IEC-60958 and IEC-61937. + +properties: + compatible: + enum: + - st,stm32h7-spdifrx + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: kclk + + interrupts: + maxItems: 1 + + dmas: + items: + - description: audio data capture DMA + - description: IEC status bits capture DMA + + dma-names: + items: + - const: rx + - const: rx-ctrl + + resets: + maxItems: 1 + +required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - interrupts + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + spdifrx: spdifrx@40004000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x40004000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 2 93 0x400 0x0>, + <&dmamux1 3 94 0x400 0x0>; + dma-names = "rx", "rx-ctrl"; + pinctrl-0 = <&spdifrx_pins>; + pinctrl-names = "default"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt index 658e1fb18a99..94796b547184 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.txt +++ b/Documentation/devicetree/bindings/sound/tas2562.txt @@ -8,7 +8,7 @@ real time monitoring of loudspeaker behavior. Required properties: - #address-cells - Should be <1>. - #size-cells - Should be <0>. - - compatible: - Should contain "ti,tas2562". + - compatible: - Should contain "ti,tas2562", "ti,tas2563". - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. - ti,imon-slot-no:- TDM TX current sense time slot. diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml new file mode 100644 index 000000000000..ab2268c0ee67 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter + +maintainers: + - Dan Murphy <dmurphy@ti.com> + +description: | + The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital + PDM microphones recording), high-performance audio, analog-to-digital + converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140 + family supports line and microphone Inputs, and offers a programmable + microphone bias or supply voltage generation. + + Specifications can be found at: + http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf + +properties: + compatible: + oneOf: + - const: ti,tlv320adc3140 + - const: ti,tlv320adc5140 + - const: ti,tlv320adc6140 + + reg: + maxItems: 1 + description: | + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpios: + description: | + GPIO used for hardware reset. + + areg-supply: + description: | + Regulator with AVDD at 3.3V. If not defined then the internal regulator + is enabled. + + ti,mic-bias-source: + description: | + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 6] + + ti,vref-source: + description: | + Indicates the source for MIC Bias. + 0 - Set VREF to 2.75V + 1 - Set VREF to 2.5V + 2 - Set VREF to 1.375V + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tlv320adc5140"; + reg = <0x4c>; + ti,mic-bias-source = <6>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 0565dc49e449..243a6b1e66ea 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -18,9 +18,14 @@ properties: "#size-cells": true compatible: - enum: - - allwinner,sun6i-a31-spi - - allwinner,sun8i-h3-spi + oneOf: + - const: allwinner,sun6i-a31-spi + - const: allwinner,sun8i-h3-spi + - items: + - enum: + - allwinner,sun8i-r40-spi + - allwinner,sun50i-h6-spi + - const: allwinner,sun8i-h3-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt deleted file mode 100644 index 1d64b61f5171..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt +++ /dev/null @@ -1,36 +0,0 @@ -Qualcomm Quad Serial Peripheral Interface (QSPI) - -The QSPI controller allows SPI protocol communication in single, dual, or quad -wire transmission modes for read/write access to slaves such as NOR flash. - -Required properties: -- compatible: An SoC specific identifier followed by "qcom,qspi-v1", such as - "qcom,sdm845-qspi", "qcom,qspi-v1" -- reg: Should contain the base register location and length. -- interrupts: Interrupt number used by the controller. -- clocks: Should contain the core and AHB clock. -- clock-names: Should be "core" for core clock and "iface" for AHB clock. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - qspi: spi@88df000 { - compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; - reg = <0x88df000 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <&gcc GCC_QSPI_CORE_CLK>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml new file mode 100644 index 000000000000..0cf470eaf2a0 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Quad Serial Peripheral Interface (QSPI) + +maintainers: + - Mukesh Savaliya <msavaliy@codeaurora.org> + - Akash Asthana <akashast@codeaurora.org> + +description: + The QSPI controller allows SPI protocol communication in single, dual, or quad + wire transmission modes for read/write access to slaves such as NOR flash. + +allOf: + - $ref: /spi/spi-controller.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-qspi + - const: qcom,qspi-v1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: iface + - const: core + + clocks: + items: + - description: AHB clock + - description: QSPI core clock + + interconnects: + minItems: 1 + maxItems: 2 + + interconnect-names: + items: + - const: qspi-config + - const: qspi-memory + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + + qspi: spi@88df000 { + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; + reg = <0 0x88df000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "iface", "core"; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; + + }; + }; +... diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml index 222990f9923c..930188bc5e6a 100644 --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml @@ -43,6 +43,9 @@ properties: '#size-cells': const: 1 + ranges: + maxItems: 1 + required: - compatible - reg @@ -51,9 +54,12 @@ required: - clock-names - '#address-cells' - '#size-cells' + - ranges + +additionalProperties: false patternProperties: - "^.+-sram$": + "-sram@[0-9a-f]+$": type: object description: A region of reserved memory. @@ -61,12 +67,8 @@ patternProperties: reg: maxItems: 1 - ranges: - maxItems: 1 - required: - reg - - ranges examples: - | @@ -88,9 +90,9 @@ examples: #address-cells = <1>; #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; gmu-sram@0 { reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; }; }; diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index f761681e4c0d..e43ec50bda37 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -32,6 +32,8 @@ properties: description: phandle to the ao-secure syscon $ref: '/schemas/types.yaml#/definitions/phandle' + '#thermal-sensor-cells': + const: 0 required: - compatible @@ -40,6 +42,8 @@ required: - clocks - amlogic,ao-secure +additionalProperties: false + examples: - | cpu_temp: temperature-sensor@ff634800 { diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index f3b441100890..b0bee7e42038 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -12,7 +12,7 @@ Required properties: Note: these bindings are deprecated for AP806/CP110 and should instead follow the rules described in: -Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt - reg: Device's register space. diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index eef13b9446a8..a57b76ad7dea 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -47,19 +47,30 @@ properties: - description: TM registers - description: SROT registers + interrupts: + minItems: 1 + items: + - description: Combined interrupt if upper or lower threshold crossed + - description: Interrupt if critical threshold crossed + + interrupt-names: + minItems: 1 + items: + - const: uplow + - const: critical + nvmem-cells: minItems: 1 maxItems: 2 description: Reference to an nvmem node for the calibration data - nvmem-cells-names: + nvmem-cell-names: minItems: 1 maxItems: 2 items: - - enum: - - caldata - - calsel + - const: calib + - const: calib_sel "#qcom,sensors": allOf: @@ -90,22 +101,16 @@ allOf: then: properties: interrupts: - items: - - description: Combined interrupt if upper or lower threshold crossed + maxItems: 1 interrupt-names: - items: - - const: uplow + maxItems: 1 else: properties: interrupts: - items: - - description: Combined interrupt if upper or lower threshold crossed - - description: Interrupt if critical threshold crossed + minItems: 2 interrupt-names: - items: - - const: uplow - - const: critical + minItems: 2 required: - compatible @@ -115,6 +120,8 @@ required: - interrupt-names - "#thermal-sensor-cells" +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -125,7 +132,7 @@ examples: <0x4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "caldata", "calsel"; + nvmem-cell-names = "calib", "calib_sel"; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow"; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt deleted file mode 100644 index 196112d23b1e..000000000000 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ /dev/null @@ -1,78 +0,0 @@ -* Renesas R-Car Thermal - -Required properties: -- compatible : "renesas,thermal-<soctype>", - "renesas,rcar-gen2-thermal" (with thermal-zone) or - "renesas,rcar-thermal" (without thermal-zone) as - fallback except R-Car V3M/E3/D3 and RZ/G2E. - Examples with soctypes are: - - "renesas,thermal-r8a73a4" (R-Mobile APE6) - - "renesas,thermal-r8a7743" (RZ/G1M) - - "renesas,thermal-r8a7744" (RZ/G1N) - - "renesas,thermal-r8a774c0" (RZ/G2E) - - "renesas,thermal-r8a7779" (R-Car H1) - - "renesas,thermal-r8a7790" (R-Car H2) - - "renesas,thermal-r8a7791" (R-Car M2-W) - - "renesas,thermal-r8a7792" (R-Car V2H) - - "renesas,thermal-r8a7793" (R-Car M2-N) - - "renesas,thermal-r8a77970" (R-Car V3M) - - "renesas,thermal-r8a77990" (R-Car E3) - - "renesas,thermal-r8a77995" (R-Car D3) -- reg : Address range of the thermal registers. - The 1st reg will be recognized as common register - if it has "interrupts". - -Option properties: - -- interrupts : If present should contain 3 interrupts for - R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise. - -Example (non interrupt support): - -thermal@ffc48000 { - compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; - reg = <0xffc48000 0x38>; -}; - -Example (interrupt support): - -thermal@e61f0000 { - compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; - reg = <0xe61f0000 0x14 - 0xe61f0100 0x38 - 0xe61f0200 0x38 - 0xe61f0300 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; -}; - -Example (with thermal-zone): - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; - }; -}; - -thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; - power-domains = <&cpg_clocks>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml new file mode 100644 index 000000000000..d2f4f1b063ac --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/rcar-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Thermal + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,thermal-r8a73a4 # R-Mobile APE6 + - renesas,thermal-r8a7779 # R-Car H1 + - const: renesas,rcar-thermal # Generic without thermal-zone + - items: + - enum: + - renesas,thermal-r8a7743 # RZ/G1M + - renesas,thermal-r8a7744 # RZ/G1N + - const: renesas,rcar-gen2-thermal # Generic thermal-zone + - items: + - enum: + - renesas,thermal-r8a7790 # R-Car H2 + - renesas,thermal-r8a7791 # R-Car M2-W + - renesas,thermal-r8a7792 # R-Car V2H + - renesas,thermal-r8a7793 # R-Car M2-N + - const: renesas,rcar-gen2-thermal # Generic thermal-zone + - const: renesas,rcar-thermal # Generic without thermal-zone + - items: + - enum: + - renesas,thermal-r8a774c0 # RZ/G2E + - renesas,thermal-r8a77970 # R-Car V3M + - renesas,thermal-r8a77990 # R-Car E3 + - renesas,thermal-r8a77995 # R-Car D3 + reg: + description: + Address ranges of the thermal registers. If more then one range is given + the first one must be the common registers followed by each sensor + according the the datasheet. + minItems: 1 + maxItems: 4 + + interrupts: + minItems: 1 + maxItems: 3 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +if: + properties: + compatible: + contains: + enum: + - renesas,thermal-r8a73a4 # R-Mobile APE6 + - renesas,thermal-r8a7779 # R-Car H1 +then: + required: + - compatible + - reg +else: + required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +examples: + # Example (non interrupt support) + - | + thermal@ffc48000 { + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; + }; + + # Example (interrupt support) + - | + #include <dt-bindings/clock/r8a73a4-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + thermal@e61f0000 { + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, + <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; + power-domains = <&pd_c5>; + }; + + # Example (with thermal-zone) + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index 6deead07728e..fa255672e8e5 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -82,6 +82,8 @@ properties: required: - compatible +additionalProperties: false + oneOf: - required: - interrupts diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 102f319833d9..582bbef62b95 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -32,6 +32,8 @@ properties: '#size-cells': const: 1 + ranges: true + clock-frequency: description: The frequency of the main counter, in Hz. Should be present only where necessary to work around broken firmware which does not configure @@ -93,6 +95,8 @@ required: - '#address-cells' - '#size-cells' +additionalProperties: false + examples: - | timer@f0000000 { diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml index 21c24a8e28fd..4956c8f409d2 100644 --- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml @@ -35,6 +35,8 @@ required: - reg - clocks +additionalProperties: false + examples: - | timer@2c000600 { diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml index 2807225db902..1a721d8af67a 100644 --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -32,6 +32,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index 273e359854dd..37bd01a62c52 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -52,6 +52,8 @@ required: - interrupts - reg +additionalProperties: false + examples: - | // In this example, the IP contains two local timers, using separate diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 330cab25cc92..4165352a590a 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -34,10 +34,6 @@ properties: - adi,adt7461 # +/-1C TDM Extended Temp Range I.C - adt7461 - # Three-Axis Digital Accelerometer - - adi,adxl345 - # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) - - adi,adxl346 # AMS iAQ-Core VOC Sensor - ams,iaq-core # i2c serial eeprom (24cxx) @@ -367,4 +363,6 @@ required: - compatible - reg +additionalProperties: false + ... diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 6baf00e7d0a9..0d6d850a7f17 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -32,20 +32,19 @@ properties: - const: lantiq,arx100-usb - const: lantiq,xrx200-usb - items: - - const: amlogic,meson8-usb - - const: snps,dwc2 - - items: - - const: amlogic,meson8b-usb - - const: snps,dwc2 - - const: amlogic,meson-gxbb-usb - - items: - - const: amlogic,meson-g12a-usb + - enum: + - amlogic,meson8-usb + - amlogic,meson8b-usb + - amlogic,meson-gxbb-usb + - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg - const: snps,dwc2 - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg - const: st,stm32f7-hsotg + - const: st,stm32mp15-fsotg + - const: st,stm32mp15-hsotg - const: samsung,s3c6400-hsotg reg: @@ -91,6 +90,10 @@ properties: vusb_a-supply: description: phandle to voltage regulator of analog section. + vusb33d-supply: + description: reference to the VBUS and ID sensing comparators supply, in + order to perform OTG operation, used on STM32MP15 SoCs. + dr_mode: enum: [host, peripheral, otg] diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 66c394f9e11f..6aae1544f240 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -78,7 +78,14 @@ Required properties: - ranges: allows valid 1:1 translation between child's address space and parent's address space - clocks: Clock IDs array as required by the controller. - - clock-names: names of clocks correseponding to IDs in the clock property + - clock-names: Names of clocks corresponding to IDs in the clock property. + Following clock names shall be provided for different + compatibles: + - samsung,exynos5250-dwusb3: "usbdrd30", + - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk", + "phyclk", + - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk" - vdd10-supply: 1.0V powr supply - vdd33-supply: 3.0V/3.3V power supply diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt index ba2e32d500c0..60e4654297af 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt @@ -9,7 +9,7 @@ Required sub-node: - connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings of the connector node are specified in: - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index 67c51759a642..ba472e7aefc9 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -34,7 +34,7 @@ Optional properties: - usb-role-switch: boolean, indicates that the device is capable of assigning the USB data role (USB host or USB device) for a given USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.txt. + see connector/usb-connector.yaml. - role-switch-default-mode: indicating if usb-role-switch is enabled, the device default operation mode of controller while usb role is USB_ROLE_NONE. Valid arguments are "host" and diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index e0ae6096f7ac..a82ca438aec1 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -34,7 +34,7 @@ Optional properties: dual-role mode. it's considered valid for compatibility reasons, not allowed for new bindings, and put into a usb-connector node. - see connector/usb-connector.txt. + see connector/usb-connector.yaml. - pinctrl-names : a pinctrl state named "default" is optional, and need be defined if auto drd switch is enabled, that means the property dr_mode is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt index 2b8a87c90d9e..5eedb0296562 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt @@ -23,7 +23,7 @@ Optional properties: MTCMOS Required child nodes: - usb connector node as defined in bindings/connector/usb-connector.txt + usb connector node as defined in bindings/connector/usb-connector.yaml Optional properties: - id-gpios : input GPIO for USB ID pin. - vbus-gpios : input GPIO for USB VBUS pin. diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml new file mode 100644 index 000000000000..b84ed8ee8cfc --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC) + +description: + The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and + USB 3.0 SuperSpeed protocols. + +maintainers: + - Nagarjuna Kristam <nkristam@nvidia.com> + - JC Kuo <jckuo@nvidia.com> + - Thierry Reding <treding@nvidia.com> + +properties: + compatible: + items: + - enum: + - nvidia,tegra210-xudc # For Tegra210 + - nvidia,tegra186-xudc # For Tegra186 + + reg: + minItems: 2 + maxItems: 3 + items: + - description: XUSB device controller registers + - description: XUSB device PCI Config registers + - description: XUSB device registers. + + reg-names: + minItems: 2 + maxItems: 3 + items: + - const: base + - const: fpci + - const: ipfs + + interrupts: + maxItems: 1 + description: Must contain the XUSB device interrupt. + + clocks: + minItems: 4 + maxItems: 5 + items: + - description: Clock to enable core XUSB dev clock. + - description: Clock to enable XUSB super speed clock. + - description: Clock to enable XUSB super speed dev clock. + - description: Clock to enable XUSB high speed dev clock. + - description: Clock to enable XUSB full speed dev clock. + + clock-names: + minItems: 4 + maxItems: 5 + items: + - const: dev + - const: ss + - const: ss_src + - const: fs_src + - const: hs_src + + power-domains: + maxItems: 2 + items: + - description: XUSBB(device) power-domain + - description: XUSBA(superspeed) power-domain + + power-domain-names: + maxItems: 2 + items: + - const: dev + - const: ss + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to the XUSB pad controller that is used to configure the USB pads + used by the XUDC controller. + + phys: + minItems: 1 + description: + Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. + + phy-names: + minItems: 1 + items: + - const: usb2-0 + - const: usb2-1 + - const: usb2-2 + - const: usb2-3 + - const: usb3-0 + - const: usb3-1 + - const: usb3-2 + - const: usb3-3 + + avddio-usb-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - power-domain-names + - nvidia,xusb-padctl + - phys + - phy-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-xudc + then: + properties: + reg: + minItems: 3 + reg-names: + minItems: 3 + clocks: + minItems: 5 + clock-names: + minItems: 5 + required: + - avddio-usb-supply + - hvdd-usb-supply + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-xudc + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@700d0000 { + compatible = "nvidia,tegra210-xudc"; + reg = <0x0 0x700d0000 0x0 0x8000>, + <0x0 0x700d8000 0x0 0x1000>, + <0x0 0x700d9000 0x0 0x1000>; + reg-names = "base", "fpci", "ipfs"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>; + clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src"; + + power-domains = <&pd_xusbdev>, <&pd_xusbss>; + power-domain-names = "dev", "ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <µ_b>; + phy-names = "usb2-0"; + + avddio-usb-supply = <&vdd_pex_1v05>; + hvdd-usb-supply = <&vdd_3v3_sys>; + }; diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt index e3fc57e605ed..6f8115db2ea9 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt @@ -9,7 +9,7 @@ Required properties: Required sub-node: - connector: The "usb-c-connector" attached to the tcpci chip, the bindings of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example : rt1711h@4e { diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt index 25780e945b15..2bd21b22ce95 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt @@ -9,7 +9,7 @@ Required sub-node: - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The bindings of the connector node are specified in: - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: hd3ss3220@47 { diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt index 0dd1469e7318..2082522b1c32 100644 --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt @@ -13,7 +13,7 @@ Required properties: Required sub-node: - connector: The "usb-c-connector" attached to the tcpci chip, the bindings of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt index 3d05ae56cb0d..ec80641208a5 100644 --- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt +++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt @@ -8,11 +8,11 @@ Required properties: - compatible : should include "gpio-usb-b-connector" and "usb-b-connector". - id-gpios, vbus-gpios : input gpios, either one of them must be present, and both can be present as well. - see connector/usb-connector.txt + see connector/usb-connector.yaml Optional properties: - vbus-supply : can be present if needed when supports dual role mode. - see connector/usb-connector.txt + see connector/usb-connector.yaml - Sub-nodes: - port : can be present. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index fba343fa0205..d3891386d671 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -141,6 +141,8 @@ patternProperties: description: Shenzhen AZW Technology Co., Ltd. "^bananapi,.*": description: BIPAI KEJI LIMITED + "^beacon,.*": + description: Compass Electronics Group, LLC "^bhf,.*": description: Beckhoff Automation GmbH & Co. KG "^bitmain,.*": @@ -235,6 +237,8 @@ patternProperties: description: DataImage, Inc. "^davicom,.*": description: DAVICOM Semiconductor, Inc. + "^dell,.*": + description: Dell Inc. "^delta,.*": description: Delta Electronics, Inc. "^denx,.*": @@ -289,6 +293,8 @@ patternProperties: description: Elan Microelectronic Corp. "^elgin,.*": description: Elgin S/A. + "^elida,.*": + description: Shenzhen Elida Technology Co., Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. "^emlid,.*": @@ -301,6 +307,8 @@ patternProperties: description: emtrion GmbH "^endless,.*": description: Endless Mobile, Inc. + "^ene,.*": + description: ENE Technology, Inc. "^energymicro,.*": description: Silicon Laboratories (formerly Energy Micro AS) "^engicam,.*": @@ -341,12 +349,16 @@ patternProperties: description: Fastrax Oy "^fcs,.*": description: Fairchild Semiconductor + "^feixin,.*": + description: Shenzhen Feixin Photoelectic Co., Ltd "^feiyang,.*": description: Shenzhen Fly Young Technology Co.,LTD. "^firefly,.*": description: Firefly "^focaltech,.*": description: FocalTech Systems Co.,Ltd + "^frida,.*": + description: Shenzhen Frida LCD Co., Ltd. "^friendlyarm,.*": description: Guangzhou FriendlyARM Computer Tech Co., Ltd "^fsl,.*": @@ -425,6 +437,8 @@ patternProperties: description: Shenzhen Hugsun Technology Co. Ltd. "^hwacom,.*": description: HwaCom Systems Inc. + "^hydis,.*": + description: Hydis Technologies "^hyundai,.*": description: Hyundai Technology "^i2se,.*": @@ -473,6 +487,8 @@ patternProperties: description: Intersil "^issi,.*": description: Integrated Silicon Solutions Inc. + "^ite,.*": + description: ITE Tech, Inc. "^itead,.*": description: ITEAD Intelligent Systems Co.Ltd "^iwave,.*": @@ -549,6 +565,8 @@ patternProperties: description: LinkSprite Technologies, Inc. "^linksys,.*": description: Belkin International, Inc. (Linksys) + "^linutronix,.*": + description: Linutronix GmbH "^linux,.*": description: Linux-specific binding "^linx,.*": @@ -557,6 +575,8 @@ patternProperties: description: Linear Technology Corporation "^logicpd,.*": description: Logic PD, Inc. + "^logictechno,.*": + description: Logic Technologies Limited "^longcheer,.*": description: Longcheer Technology (Shanghai) Co., Ltd. "^loongson,.*": @@ -633,6 +653,9 @@ patternProperties: description: Monolithic Power Systems Inc. "^mqmaker,.*": description: mqmaker Inc. + "^mrvl,.*": + description: Marvell Technology Group Ltd. + deprecated: true "^mscc,.*": description: Microsemi Corporation "^msi,.*": @@ -663,6 +686,8 @@ patternProperties: description: Netron DY "^netxeon,.*": description: Shenzhen Netxeon Technology CO., LTD + "^neweast,.*": + description: Guangdong Neweast Optoelectronics CO., LTD "^nexbox,.*": description: Nexbox "^nextthing,.*": @@ -731,6 +756,8 @@ patternProperties: description: OmniVision Technologies "^oxsemi,.*": description: Oxford Semiconductor, Ltd. + "^ozzmaker,.*": + description: OzzMaker "^panasonic,.*": description: Panasonic Corporation "^parade,.*": @@ -765,6 +792,8 @@ patternProperties: description: Broadcom Corporation (formerly PLX Technology) "^pni,.*": description: PNI Sensor Corporation + "^pocketbook,.*": + description: PocketBook International SA "^polaroid,.*": description: Polaroid Corporation "^portwell,.*": @@ -863,6 +892,8 @@ patternProperties: description: Small Form Factor Committee "^sgd,.*": description: Solomon Goldentek Display Corporation + "^sgmicro,.*": + description: SG Micro Corp "^sgx,.*": description: SGX Sensortech "^sharp,.*": @@ -986,6 +1017,8 @@ patternProperties: "^toppoly,.*": description: TPO (deprecated, use tpo) deprecated: true + "^topwise,.*": + description: Topwise Communication Co., Ltd. "^toradex,.*": description: Toradex AG "^toshiba,.*": @@ -1056,6 +1089,8 @@ patternProperties: description: Vision Optical Technology Co., Ltd. "^vxt,.*": description: VXT Ltd + "^waveshare,.*": + description: Waveshare Electronics "^wd,.*": description: Western Digital Corp. "^wetek,.*": @@ -1082,6 +1117,8 @@ patternProperties: description: X-Powers "^xes,.*": description: Extreme Engineering Solutions (X-ES) + "^xiaomi,.*": + description: Xiaomi Technology Co., Ltd. "^xillybus,.*": description: Xillybus Ltd. "^xinpeng,.*": diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt deleted file mode 100644 index 7cc1407f15cb..000000000000 --- a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt +++ /dev/null @@ -1,11 +0,0 @@ -STMicroelectronics STPMIC1 Watchdog - -Required properties: - -- compatible : should be "st,stpmic1-wdt" - -Example: - -watchdog { - compatible = "st,stpmic1-wdt"; -}; |