diff options
Diffstat (limited to 'Documentation/devicetree')
29 files changed, 165 insertions, 47 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index a63898954068..91c4d00e96d3 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -2,7 +2,6 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema -DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u) DT_SCHEMA_MIN_VERSION = 2020.5 @@ -35,21 +34,40 @@ quiet_cmd_mk_schema = SCHEMA $@ DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') -DT_SCHEMA_FILES ?= $(DT_DOCS) - -extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) -extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml - override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ - -Wno-graph_child_address + -Wno-graph_child_address \ + -Wno-interrupt_provider $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE $(call if_changed,mk_schema) -$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG) +ifeq ($(DT_SCHEMA_FILES),) + +# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too. +# Just copy processed-schema-examples.yaml + +$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE + $(call if_changed,copy) + +DT_SCHEMA_FILES = $(DT_DOCS) + +else + +# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml + +$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE $(call if_changed,mk_schema) -extra-y += processed-schema.yaml +endif + +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) +extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml +extra-$(CHECK_DTBS) += processed-schema.yaml + +# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of +# build artifacts here before they are processed by scripts/Makefile.clean +clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \ + -name '*.example.dt.yaml' \) -delete 2>/dev/null) diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 715047444391..10b8459e49f8 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -47,7 +47,7 @@ Required properties: &lsio_mu1 1 2 &lsio_mu1 1 3 &lsio_mu1 3 3>; - See Documentation/devicetree/bindings/mailbox/fsl,mu.txt + See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml for detailed mailbox binding. Note: Each mu which supports general interrupt should have an alias correctly diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml index c4c9119e4a20..a0c6c5d2b70f 100644 --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -80,14 +80,14 @@ examples: ranges = <1 0x00000000 0x42000000 0x02000000>, <5 0x00000000 0x46000000 0x01000000>; - ethernet@1,01f00000 { + ethernet@1,1f00000 { compatible = "smsc,lan9115"; reg = <1 0x01f00000 0x1000>; interrupts = <0 48 4>; phy-mode = "mii"; }; - uart@5,00200000 { + serial@5,200000 { compatible = "ns16550a"; reg = <5 0x00200000 0x20>; interrupts = <0 49 4>; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml index b5f3ed084ea0..a75365453dbc 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX27 maintainers: - - Fabio Estevam <fabio.estevam@freescale.com> + - Fabio Estevam <fabio.estevam@nxp.com> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml index 1b6f75d3928a..a25a374b3b2a 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX31 maintainers: - - Fabio Estevam <fabio.estevam@freescale.com> + - Fabio Estevam <fabio.estevam@nxp.com> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml index f5c2b3d7a910..4d9e7c73dce9 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX5 maintainers: - - Fabio Estevam <fabio.estevam@freescale.com> + - Fabio Estevam <fabio.estevam@nxp.com> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 6e14e087c0d0..0d1db3f9da84 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -37,7 +37,7 @@ Optional properties: simple-card or audio-graph-card binding. See their binding documents on how to describe the way the sii902x device is connected to the rest of the audio system: - Documentation/devicetree/bindings/sound/simple-card.txt + Documentation/devicetree/bindings/sound/simple-card.yaml Documentation/devicetree/bindings/sound/audio-graph-card.txt Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index 5bf77f6dd19d..5a99490c17b9 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -68,7 +68,7 @@ Required properties: datasheet - clocks : phandle to the PRE axi clock input, as described in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - clock-names: should be "axi" - interrupts: should contain the PRE interrupt - fsl,iram: phandle pointing to the mmio-sram device node, that should be @@ -94,7 +94,7 @@ Required properties: datasheet - clocks : phandles to the PRG ipg and axi clock inputs, as described in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - clock-names: should be "ipg" and "axi" - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed PRE as the first entry and the muxable PREs following. diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt index 38c637fa39dd..8e6e7d797943 100644 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -30,8 +30,8 @@ Required properties: "di2_sel" - IPU2 DI0 mux "di3_sel" - IPU2 DI1 mux The needed clock numbers for each are documented in - Documentation/devicetree/bindings/clock/imx5-clock.txt, and in - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. Optional properties: - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml index 41fd5713c156..be69e0cc50fc 100644 --- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml +++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml @@ -33,7 +33,7 @@ additionalProperties: false examples: - | - sysreg { + sysreg@0 { compatible = "arm,versatile-sysreg", "syscon", "simple-mfd"; reg = <0x00000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml index ec8ae742d4da..7204da5eb4c5 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -24,7 +24,7 @@ properties: description: | Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt index ba455589f869..e1c49b660d3a 100644 --- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt @@ -12,7 +12,7 @@ Required properties for the top level node: Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Should be 2. The first cell defines the interrupt number, - the second encodes the triger flags encoded as described in + the second encodes the trigger flags encoded as described in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - compatible: - "mediatek,mt7621-gpio" for Mediatek controllers diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt index e13405355166..e6bbcae4d07f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt @@ -10,7 +10,7 @@ Interrupt number definition: 16-31 : private irq, and we use 16 as the co-processor timer. 31-1024: common irq for soc ip. -Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h) +Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h) IRQ_TYPE_LEVEL_HIGH (default) IRQ_TYPE_LEVEL_LOW IRQ_TYPE_EDGE_RISING diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt index 4438432bfe9b..ad76edccf881 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt @@ -87,7 +87,7 @@ Example: ranges; /* APU<->RPU0 IPI mailbox controller */ - ipi_mailbox_rpu0: mailbox@ff90400 { + ipi_mailbox_rpu0: mailbox@ff990400 { reg = <0xff990400 0x20>, <0xff990420 0x20>, <0xff990080 0x20>, diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt index 8c4d649cdd8f..2d7cdf19a0d0 100644 --- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt @@ -8,7 +8,7 @@ The embedded controller requires the SPI controller driver to signal readiness to receive a transfer (that is, when TX FIFO contains the response data) by strobing the ACK pin with the ready signal. See the "ready-gpios" property of the SSP binding as documented in: -<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>. +<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>. Example: &ssp3 { diff --git a/Documentation/devicetree/bindings/net/dsa/ocelot.txt b/Documentation/devicetree/bindings/net/dsa/ocelot.txt index 66a129fea705..7a271d070b72 100644 --- a/Documentation/devicetree/bindings/net/dsa/ocelot.txt +++ b/Documentation/devicetree/bindings/net/dsa/ocelot.txt @@ -4,10 +4,15 @@ Microchip Ocelot switch driver family Felix ----- -The VSC9959 core is currently the only switch supported by the driver, and is -found in the NXP LS1028A. It is a PCI device, part of the larger ENETC root -complex. As a result, the ethernet-switch node is a sub-node of the PCIe root -complex node and its "reg" property conforms to the parent node bindings: +Currently the switches supported by the felix driver are: + +- VSC9959 (Felix) +- VSC9953 (Seville) + +The VSC9959 switch is found in the NXP LS1028A. It is a PCI device, part of the +larger ENETC root complex. As a result, the ethernet-switch node is a sub-node +of the PCIe root complex node and its "reg" property conforms to the parent +node bindings: * reg: Specifies PCIe Device Number and Function Number of the endpoint device, in this case for the Ethernet L2Switch it is PF5 (of device 0, bus 0). @@ -114,3 +119,95 @@ Example: }; }; }; + +The VSC9953 switch is found inside NXP T1040. It is a platform device with the +following required properties: + +- compatible: + Must be "mscc,vsc9953-switch". + +Supported PHY interface types (appropriate SerDes protocol setting changes are +needed in the RCW binary): + +* phy_mode = "internal": on ports 8 and 9 +* phy_mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 +* phy_mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 + +Example: + +&soc { + ethernet-switch@800000 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "mscc,vsc9953-switch"; + little-endian; + reg = <0x800000 0x290000>; + + ports { + #address-cells = <0x1>; + #size-cells = <0x0>; + + port@0 { + reg = <0x0>; + label = "swp0"; + }; + + port@1 { + reg = <0x1>; + label = "swp1"; + }; + + port@2 { + reg = <0x2>; + label = "swp2"; + }; + + port@3 { + reg = <0x3>; + label = "swp3"; + }; + + port@4 { + reg = <0x4>; + label = "swp4"; + }; + + port@5 { + reg = <0x5>; + label = "swp5"; + }; + + port@6 { + reg = <0x6>; + label = "swp6"; + }; + + port@7 { + reg = <0x7>; + label = "swp7"; + }; + + port@8 { + reg = <0x8>; + phy-mode = "internal"; + ethernet = <&enet0>; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + port@9 { + reg = <0x9>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 219bcbd0d344..9ef5bacda8c1 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices This device is a serial attached device to BTIF device and thus it must be a child node of the serial node with BTIF. The dt-bindings details for BTIF -device can be known via Documentation/devicetree/bindings/serial/8250.txt. +device can be known via Documentation/devicetree/bindings/serial/8250.yaml. Required properties: diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 554dcd7a40a9..c6716ac6cbcc 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -24,7 +24,7 @@ description: | IEEE 802.3 Standard Media Independent Interface (MII), the IEEE 802.3 Gigabit Media Independent Interface (GMII) or Reduced GMII (RGMII). - Specifications about the charger can be found at: + Specifications about the Ethernet PHY can be found at: https://www.ti.com/lit/gpn/dp83867ir properties: diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index 71e90a3e4652..cf40b469c719 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -24,7 +24,7 @@ description: | conversions. The DP83869HM can also support Bridge Conversion from RGMII to SGMII and SGMII to RGMII. - Specifications about the charger can be found at: + Specifications about the Ethernet PHY can be found at: http://www.ti.com/lit/ds/symlink/dp83869hm.pdf properties: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index b68613188c19..1b8e8b4a6379 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -114,7 +114,7 @@ with values derived from the SoC user manual. [flags]> On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver. -Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml for documentation of the GPIO device tree bindings on those platforms. diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 269682619a70..d5f6919a2d69 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -5,7 +5,7 @@ It is based on common bindings for device graphs. see ${LINUX}/Documentation/devicetree/bindings/graph.txt Basically, Audio Graph Card property is same as Simple Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml Below are same as Simple-Card. diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 4d51f3f5ea98..a6ffcdec6f6a 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -5,7 +5,7 @@ codec or external codecs. sti sound drivers allows to expose sti SoC audio interface through the generic ASoC simple card. For details about sound card declaration please refer to -Documentation/devicetree/bindings/sound/simple-card.txt. +Documentation/devicetree/bindings/sound/simple-card.yaml. 1) sti-uniperiph-dai: audio dai device. --------------------------------------- diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt index 790311a42bf1..c8c1e913f4e7 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt @@ -19,7 +19,7 @@ Required properties: SPI Controller nodes must be child of GENI based Qualcomm Universal Peripharal. Please refer GENI based QUP wrapper controller node bindings -described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt. +described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. SPI slave nodes must be children of the SPI master node and conform to SPI bus binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt. diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index fcd25a0af38c..727d04550324 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -41,7 +41,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1: SDM845 TSENS - soc: soc@0 { + soc: soc { #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index b8515d3eeaa2..3ec9cc87ec50 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -224,7 +224,7 @@ examples: #include <dt-bindings/thermal/thermal.h> // Example 1: SDM845 TSENS - soc: soc@0 { + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml index 25b9209c2e5d..ea14de80ec75 100644 --- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml @@ -35,7 +35,7 @@ examples: #include <dt-bindings/soc/ti,sci_pm_domain.h> vtm: thermal@42050000 { compatible = "ti,am654-vtm"; - reg = <0x0 0x42050000 0x0 0x25c>; + reg = <0x42050000 0x25c>; power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt index 15cfec08fbb8..f5c7e99cf52b 100644 --- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt @@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. - PTIM_CCVR "cr<3, 14>" Current counter value reg. - - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. + - PTIM_LVR "cr<6, 14>" Window value reg to trigger next event. ============================== timer node bindings definition diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index e4e83d3971ac..8b019ac05bbe 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -127,8 +127,8 @@ examples: #address-cells = <1>; #size-cells = <0>; - string@0409 { - reg = <0x0409>; + string@409 { + reg = <0x409>; manufacturer = "ASPEED"; product = "USB Virtual Hub"; serial-number = "0000"; diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 220cf464ed77..8c74a99f95e2 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -1,4 +1,4 @@ -:orphan: +.. SPDX-License-Identifier: GPL-2.0 Writing DeviceTree Bindings in json-schema ========================================== @@ -124,9 +124,12 @@ dtc must also be built with YAML output support enabled. This requires that libyaml and its headers be installed on the host system. For some distributions that involves installing the development package, such as: -Debian: +Debian:: + apt-get install libyaml-dev -Fedora: + +Fedora:: + dnf -y install libyaml-devel Running checks |