diff options
Diffstat (limited to 'Documentation/devicetree')
329 files changed, 1809 insertions, 614 deletions
diff --git a/Documentation/devicetree/bindings/arc/hsdk.txt b/Documentation/devicetree/bindings/arc/hsdk.txt new file mode 100644 index 000000000000..be50654bbf61 --- /dev/null +++ b/Documentation/devicetree/bindings/arc/hsdk.txt @@ -0,0 +1,7 @@ +Synopsys DesignWare ARC HS Development Kit Device Tree Bindings +--------------------------------------------------------------------------- + +ARC HSDK Board with quad-core ARC HS38x4 in silicon. + +Required root node properties: + - compatible = "snps,hsdk"; diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index e926aea1147d..68301b77e854 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -108,6 +108,5 @@ Example: frame-number = <1> interrupts = <0 15 0x8>; reg = <0xf0003000 0x1000>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt index 171d02cadea4..29cdbae6c5ac 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt @@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cpm_pinctrl 0 0 32>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt new file mode 100644 index 000000000000..d2aa696b161b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt @@ -0,0 +1,51 @@ +MediaTek Serial ATA controller + +Required properties: + - compatible : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci". + When using "mediatek,mtk-ahci" compatible strings, you + need SoC specific ones in addition, one of: + - "mediatek,mt7622-ahci" + - reg : Physical base addresses and length of register sets. + - interrupts : Interrupt associated with the SATA device. + - interrupt-names : Associated name must be: "hostc". + - clocks : A list of phandle and clock specifier pairs, one for each + entry in clock-names. + - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm". + - phys : A phandle and PHY specifier pair for the PHY port. + - phy-names : Associated name must be: "sata-phy". + - ports-implemented : See ./ahci-platform.txt for details. + +Optional properties: + - power-domains : A phandle and power domain specifier pair to the power + domain which is responsible for collapsing and restoring + power to the peripheral. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Associated names must be: "axi", "sw", "reg". + - mediatek,phy-mode : A phandle to the system controller, used to enable + SATA function. + +Example: + + sata: sata@1a200000 { + compatible = "mediatek,mt7622-ahci", + "mediatek,mtk-ahci"; + reg = <0 0x1a200000 0 0x1100>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&u3port1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + }; diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt index a668f0e7d001..02e690a675db 100644 --- a/Documentation/devicetree/bindings/ata/apm-xgene.txt +++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt @@ -57,7 +57,6 @@ Example: <0x0 0x1f227000 0x0 0x1000>; interrupts = <0x0 0x87 0x4>; dma-coherent; - status = "ok"; clocks = <&sataclk 0>; phys = <&phy2 0>; phy-names = "sata-phy"; @@ -72,7 +71,6 @@ Example: <0x0 0x1f237000 0x0 0x1000>; interrupts = <0x0 0x88 0x4>; dma-coherent; - status = "ok"; clocks = <&sataclk 0>; phys = <&phy3 0>; phy-names = "sata-phy"; diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt index e38d73414b0d..f1172f00188a 100644 --- a/Documentation/devicetree/bindings/ata/imx-pata.txt +++ b/Documentation/devicetree/bindings/ata/imx-pata.txt @@ -13,5 +13,4 @@ Example: reg = <0x83fe0000 0x4000>; interrupts = <70>; clocks = <&clks 161>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt index fa6cde41b460..f2ab7fd013bd 100644 --- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown: }; devbus-bootcs { - status = "okay"; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; /* NOR */ @@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown: pcie-controller { compatible = "marvell,armada-xp-pcie"; - status = "okay"; device_type = "pci"; #address-cells = <3>; @@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown: pcie@1,0 { /* Port 0, Lane 0 */ - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt index 83b0e54f727c..3e21eb822811 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt @@ -84,7 +84,6 @@ gmi@70090000 { reset-names = "gmi"; ranges = <4 0 0xd0000000 0xfffffff>; - status = "okay"; bus@4,0 { compatible = "simple-bus"; @@ -121,7 +120,6 @@ gmi@70090000 { reset-names = "gmi"; ranges = <4 0 0xd0000000 0xfffffff>; - status = "okay"; can@4,0 { reg = <4 0 0x100>; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt index 7ff13be1750b..3108d03802ee 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt @@ -33,7 +33,6 @@ Example: #size-cells = <1>; ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; - status = "disabled"; child1 { ... diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index dee3f5d9df26..e3b13ea7d2ae 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -5,9 +5,31 @@ The chosen node does not represent a real device, but serves as a place for passing data between firmware and the operating system, like boot arguments. Data in the chosen node does not represent the hardware. +The following properties are recognized: -stdout-path property --------------------- + +kaslr-seed +----------- + +This property is used when booting with CONFIG_RANDOMIZE_BASE as the +entropy used to randomize the kernel image base address location. Since +it is used directly, this value is intended only for KASLR, and should +not be used for other purposes (as it may leak information about KASLR +offsets). It is parsed as a u64 value, e.g. + +/ { + chosen { + kaslr-seed = <0xfeedbeef 0xc0def00d>; + }; +}; + +Note that if this property is set from UEFI (or a bootloader in EFI +mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by +the Linux EFI stub (which will populate the property itself, using +EFI_RNG_PROTOCOL). + +stdout-path +----------- Device trees may specify the device to be used for boot console output with a stdout-path property under /chosen, as described in the Devicetree diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt index 62e67e883e76..b3205b21c9d0 100644 --- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt +++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt @@ -102,7 +102,6 @@ uart4: serial@80010000 { reg = <0x80010000 0x4000>; clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>; interrupts = <19>; - status = "disabled"; }; Clock consumer with only one, _AHB_ sink. diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index a55d31b48d6e..faa6d8ac5834 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated interrupts = <0 90 1>; clocks = <&clkc_AO CLKID_AO_UART1>; resets = <&clkc_AO RESET_AO_UART1>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index a09d627b5508..924040769186 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock reg = <0xc81004c0 0x14>; interrupts = <0 90 1>; clocks = <&clkc CLKID_CLK81>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 606da38c0959..207682647d33 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock reg = <0xc81004c0 0x14>; interrupts = <0 90 1>; clocks = <&clkc CLKID_CLK81>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt index 5286e260fcae..8e5a7d868557 100644 --- a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt +++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt @@ -46,7 +46,6 @@ Device tree example: uart@3e002000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 1dc80f8811fe..fe885abc9cb4 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart0_bus>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt index cc9b86c35758..0035a7ecaf20 100644 --- a/Documentation/devicetree/bindings/clock/hi3660-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -38,5 +38,4 @@ Examples: clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt index 7894a64887cb..4733e58e491b 100644 --- a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt +++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt @@ -27,5 +27,4 @@ Examples: interrupts = <0 49 4>; clocks = <&clock HIX5HD2_FIXED_83M>; clock-names = "apb_pclk"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt index c3b0db437c48..806f63d628bd 100644 --- a/Documentation/devicetree/bindings/clock/imx21-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt @@ -24,5 +24,4 @@ Examples: clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, <&clks IMX21_CLK_PER1>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt index 5083c0b834b2..8385348d3bd9 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -67,5 +67,4 @@ auart0: serial@8006c000 { reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt index ba6b312ff8a5..f8135ea9ca4e 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -157,5 +157,4 @@ uart1: serial@43f90000 { interrupts = <45>; clocks = <&clks 79>, <&clks 50>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt index cc05de9ec393..4c95c048d3b2 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt @@ -24,5 +24,4 @@ Examples: clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt index e6587af62ff0..d84a37d2885f 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -90,5 +90,4 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; clocks = <&clks 45>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt index 8163d565f697..0a291090e562 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt @@ -87,5 +87,4 @@ uart1: serial@43f90000 { interrupts = <45>; clocks = <&clks 10>, <&clks 30>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index cadc4d29ada6..a24ca9e582d2 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -25,5 +25,4 @@ can1: can@53fc8000 { interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 9252912a5b0e..aa0a4d423ef5 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -27,5 +27,4 @@ uart1: serial@02020000 { interrupts = <0 26 0x04>; clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt index 63f9d8277d48..dff236f524a7 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -66,7 +66,6 @@ clock@70110000 { #clock-cells = <0>; clock-output-names = "dfllCPU_out"; vdd-cpu-supply = <&vdd_cpu>; - status = "okay"; nvidia,sample-rate = <12500>; nvidia,droop-ctrl = <0x00000f00>; diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt index 4b4a9024bd99..8f67239411fe 100644 --- a/Documentation/devicetree/bindings/clock/pxa-clock.txt +++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt @@ -12,5 +12,4 @@ Examples: pxa2xx_clks: pxa2xx_clks@41300004 { compatible = "marvell,pxa-clocks"; #clock-cells = <1>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 0cd894f987a3..707a686d8d3e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -81,5 +81,4 @@ Examples dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg 310>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt index e4cdaf1cb333..7cc4c0330b53 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt @@ -44,5 +44,4 @@ Examples interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; power-domains = <&cpg_clocks>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb51a33a1fbf..bb5d942075fb 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -50,5 +50,4 @@ Examples clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt index 822505e715ae..2632d3f13004 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock interrupts = <1 23 3 4>, <1 23 4 4>; clock-names = "uart", "clk_uart_baud2"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt index 2b430960ba47..21a8c23e658f 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, <&clocks SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt index e67bb05478af..985c0f574e9a 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud3"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, <&clocks SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt index fa171dc4bd3c..872ee8e0f041 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt @@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud3"; clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>, <&clock SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt index effd9401c133..15b48e20a061 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt @@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud1"; clocks = <&clocks UART0>, <&clocks UART0>, <&clocks SCLK_UART0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index 28b28309f535..a6c4ef343b44 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -12,7 +12,11 @@ generators can be found in [1]. ==I2C device node== Required properties: -- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}". +- compatible: shall be one of the following: + "silabs,si5351a" - Si5351a, QFN20 package + "silabs,si5351a-msop" - Si5351a, MSOP10 package + "silabs,si5351b" - Si5351b, QFN20 package + "silabs,si5351c" - Si5351c, QFN20 package - reg: i2c device address, shall be 0x60 or 0x61. - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt index 1e884c40ab50..4e59dc6b1778 100644 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt @@ -14,10 +14,9 @@ Required properties: - compatible: Must be "ti,k2g-sci-clk" - #clock-cells: Shall be 2. In clock consumers, this cell represents the device ID and clock ID - exposed by the PM firmware. The assignments can be found in the header - files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and - <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> - is the SoC involved, for example 'k2g'. + exposed by the PM firmware. The list of valid values for the device IDs + and clocks IDs for 66AK2G SoC are documented at + http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data Examples: -------- diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt index 585e8c191f50..10f7047755f3 100644 --- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -81,13 +81,11 @@ atl: atl@4843c000 { <&atl_clkin2_ck>, <&atl_clkin3_ck>; clocks = <&atl_gfclk_mux>; clock-names = "fck"; - status = "disabled"; }; #include <dt-bindings/clk/ti-dra7-atl.h> &atl { - status = "okay"; atl2 { bws = <DRA7_ATL_WS_MCASP2_FSX>; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt index 750442b65505..e85ecb510d56 100644 --- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -31,5 +31,4 @@ uart0: serial@0x09405000 { reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&lsp1clk ZX296702_UART0_PCLK>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt index 4ad703808407..3a46bf0b2540 100644 --- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt @@ -34,5 +34,4 @@ usbphy0:usb-phy0 { #phy-cells = <0>; clocks = <&topclk USB20_PHY_CLK>; clock-names = "phyclk"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 6949e50f1f16..76a0b4e80e83 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -13,5 +13,4 @@ dcp@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index 941bb6a6fb13..fbc07d12322f 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -23,5 +23,4 @@ Example: interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt index c6c6a4a045bd..28d3f2496b89 100644 --- a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt +++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt @@ -41,5 +41,4 @@ Examples: clock-names = "cesa0", "cesa1"; marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; marvell,crypto-sram-size = <0x600>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt index c0c35f00335b..d9b92e2f3138 100644 --- a/Documentation/devicetree/bindings/crypto/mv_cesa.txt +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -29,5 +29,4 @@ Examples: interrupts = <22>; marvell,crypto-srams = <&crypto_sram>; marvell,crypto-sram-size = <0x600>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt index 096df34b11c1..5e2ba385b8c9 100644 --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt @@ -25,5 +25,4 @@ Examples: clock-names = "aclk", "hclk", "sclk", "apb_pclk"; resets = <&cru SRST_CRYPTO>; reset-names = "crypto-rst"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt index f2233138eba9..001dd63979a9 100644 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt @@ -15,5 +15,4 @@ Example: rockchip,pmu = <&pmugrf>; clocks = <&cru PCLK_DDR_MON>; clock-names = "pclk_ddr_mon"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index 7a9e8603c150..d6d2833482c9 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -205,5 +205,4 @@ Example: rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>; rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>; rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index ecb8da063d07..1a21202778ee 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -34,7 +34,6 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; display = <&display0>; - status = "okay"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index ec94468b35be..82f2acb3d374 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -23,7 +23,6 @@ Example: interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; - status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt index 7baa6582517e..aacc8b92968c 100644 --- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt @@ -33,7 +33,6 @@ stdp2690-ge-b850v3-fw required properties: Example: &mux2_i2c2 { - status = "okay"; clock-frequency = <100000>; stdp4028@73 { diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index 81b68580e199..cb7ffc58c564 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -43,7 +43,6 @@ Example: clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; clock-names = "iahb", "isfr"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt index 6fa4ab668db5..475008747801 100644 --- a/Documentation/devicetree/bindings/display/fsl,tcon.txt +++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt @@ -14,5 +14,4 @@ timing-controller@4003d000 { reg = <0x4003d000 0x1000>; clocks = <&clks VF610_CLK_TCON0>; clock-names = "ipg"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index fa01db7eb66c..f79854783c2c 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -116,7 +116,7 @@ Parallel display support Required properties: - compatible: Should be "fsl,imx-parallel-display" Optional properties: -- interface_pix_fmt: How this display is connected to the +- interface-pix-fmt: How this display is connected to the display interface. Currently supported types: "rgb24", "rgb565", "bgr666" and "lvds666". - edid: verbatim EDID data block describing attached display. diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt index 309c47f25b87..f79641bd5f18 100644 --- a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt +++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt @@ -23,7 +23,6 @@ Example: reg = <0x44000000 0x10000>; interrupts = <17>; clocks = <&clks CLK_LCD>; - status = "okay"; port { lcdc_out: endpoint { diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt index 5c70a8380e58..d0f55161579a 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -18,6 +18,5 @@ Example: power-supply = <...>; backlight = <&backlight>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt index 47665a12786f..43561584c13a 100644 --- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -59,7 +59,6 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&edp_hpd>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index fad8b7619647..adc94fc3c9f8 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -46,7 +46,6 @@ hdmi: hdmi@ff980000 { interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; - status = "disabled"; ports { hdmi_in: port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 543b07435f4f..6bb59ab39f2f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -36,7 +36,6 @@ Example: resets = <&cru SRST_MIPIDSI0>; reset-names = "apb"; rockchip,grf = <&grf>; - status = "okay"; ports { #address-cells = <1>; @@ -65,6 +64,5 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; backlight = <&backlight>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt index 8096a29f9776..cec21714f0e0 100644 --- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt @@ -25,7 +25,6 @@ hdmi: hdmi@20034000 { clock-names = "pclk"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; - status = "disabled"; hdmi_in: port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt index c46ba641a1df..a9168ae6946c 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt @@ -28,6 +28,5 @@ chosen { allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 2ee6ff0ef98e..92441086caba 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -278,7 +278,6 @@ hdmi: hdmi@01c16000 { <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_DEDICATED 24>; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt index 191d7bd8a6fe..97e213e07660 100644 --- a/Documentation/devicetree/bindings/dma/fsl-edma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -72,5 +72,4 @@ sai2: sai@40031000 { dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt index c075f5988135..0ffb4d8766a8 100644 --- a/Documentation/devicetree/bindings/dma/mv-xor.txt +++ b/Documentation/devicetree/bindings/dma/mv-xor.txt @@ -30,7 +30,6 @@ xor@d0060900 { reg = <0xd0060900 0x100 0xd0060b00 0x100>; clocks = <&coreclk 0>; - status = "okay"; xor00 { interrupts = <51>; diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt index 9bcab9115982..9d3b2f917b7b 100644 --- a/Documentation/devicetree/bindings/dma/qcom_adm.txt +++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt @@ -48,7 +48,6 @@ Each dmas request consists of 3 cells: Example: spi4: spi@1a280000 { - status = "ok"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index 79a204d50234..891db41e9420 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -25,6 +25,7 @@ Required Properties: - "renesas,dmac-r8a7794" (R-Car E2) - "renesas,dmac-r8a7795" (R-Car H3) - "renesas,dmac-r8a7796" (R-Car M3-W) + - "renesas,dmac-r8a77970" (R-Car V3M) - reg: base address and length of the registers block for the DMAC diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index e7780a186a36..1be6941ac1e5 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,r8a7793-usb-dmac" (R-Car M2-N) - "renesas,r8a7794-usb-dmac" (R-Car E2) - "renesas,r8a7795-usb-dmac" (R-Car H3) + - "renesas,r8a7796-usb-dmac" (R-Car M3-W) - reg: base address and length of the registers block for the DMAC - interrupts: interrupt specifiers for the DMAC, one for each entry in interrupt-names. diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index 4775c66f4508..a122723907ac 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -63,7 +63,6 @@ Example: compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; interrupts = <0 35 0x4>; - status = "disabled"; dmas = <&dmahost 12 0 1>, <&dmahost 13 0 1 0>; dma-names = "rx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt index 495d853c569b..52cfec9e77ad 100644 --- a/Documentation/devicetree/bindings/dma/st_fdma.txt +++ b/Documentation/devicetree/bindings/dma/st_fdma.txt @@ -69,7 +69,6 @@ Example: sti_uni_player2: sti-uni-player@2 { compatible = "st,sti-uni-player"; - status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index 95800ab37bb0..aa7dbd565ad0 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -135,5 +135,4 @@ Example: <&dma 13 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "rx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index f1634a27a830..3b484380c56a 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -40,7 +40,6 @@ Example: clock-names = "ahb", "mod"; dmas = <&dma 1 29>, <&dma 1 28>; dma-names = "rx", "tx"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 6b267045f522..98fbe1a5c6dd 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -9,6 +9,7 @@ Required properties: "allwinner,sun8i-a23-dma" "allwinner,sun8i-a83t-dma" "allwinner,sun8i-h3-dma" + "allwinner,sun8i-v3s-dma" - reg: Should contain the registers base address and length - interrupts: Should contain a reference to the interrupt used by this device - clocks: Should contain a reference to the parent AHB clock diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index aead5869a28d..b849a1ed389d 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -62,7 +62,6 @@ uart1: serial@4806a000 { interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; - status = "disabled"; /* Requesting crossbar input 49 and 50 */ dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 18090e7226b4..33d9e386dc45 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -102,7 +102,6 @@ mcasp0: mcasp@48038000 { reg-names = "mpu", "dat"; interrupts = <80>, <81>; interrupt-names = "tx", "rx"; - status = "disabled"; /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */ dmas = <&edma 8 2>, <&edma 9 2>; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt index 9766f7472f51..cfa4ed42b62f 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt @@ -31,7 +31,6 @@ Example for full FPGA configuration: cell-index = <1>; interrupts = <92>; clocks = <&coreclk 0>; - status = "okay"; fpga_mgr_spi: fpga-mgr@0 { compatible = "xlnx,fpga-slave-serial"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 4b6cc632ca5c..69d46162d0f5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -23,7 +23,6 @@ gpio0: gpio@1100 { #gpio-cells = <2>; reg = <0x1100 0x080>; interrupts = <78 0x8>; - status = "okay"; }; Example of gpio-controller node for a ls2080a SoC: diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt index 96c37eb15075..dd04d96e6ff1 100644 --- a/Documentation/devicetree/bindings/gpio/spear_spics.txt +++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt @@ -42,7 +42,6 @@ spics: spics@e0700000{ spi0: spi@e0100000 { - status = "okay"; num-cs = <3>; cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index 2b6243e730f6..b4ebd56d03f3 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -10,6 +10,7 @@ Required properties: * And, optionally, one of the vendor specific compatible: + allwinner,sun4i-a10-mali + allwinner,sun7i-a20-mali + + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + stericsson,db8500-mali @@ -58,6 +59,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - allwinner,sun50i-h5-mali + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index b7e4c7444510..f32bbba4d3bc 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -51,7 +51,6 @@ Example for GK20A: resets = <&tegra_car 184>; reset-names = "gpu"; iommus = <&mc TEGRA_SWGROUP_GPU>; - status = "disabled"; }; Example for GM20B: @@ -70,7 +69,6 @@ Example for GM20B: resets = <&tegra_car 184>; reset-names = "gpu"; iommus = <&mc TEGRA_SWGROUP_GPU>; - status = "disabled"; }; Example for GP10B: @@ -89,5 +87,4 @@ Example for GP10B: reset-names = "gpu"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; iommus = <&smmu TEGRA186_SID_GPU>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt index c4f358dafdaa..1e7959332dbc 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt @@ -24,5 +24,4 @@ Example: interrupts = <0 89 0>; clocks = <&clock 177>, <&clock 277>; clock-names = "sclk_fimg2d", "fimg2d"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index f26625e42693..b8eca3c7810d 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -92,6 +92,5 @@ ssi-controller@48058000 { interrupts = <69>, <70>; - status = "disabled"; /* second port is not used on N900 */ } } diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt index 8ce9cd2855b5..c143948b2a37 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt @@ -20,8 +20,8 @@ i2c@0 { #address-cells = <1>; #size-cells = <0>; - retu-mfd: retu@1 { - compatible = "retu-mfd"; + retu: retu@1 { + compatible = "nokia,retu"; reg = <0x1>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt index 7ce23ac61308..81b5d55086fa 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -102,7 +102,6 @@ And for clarification, here are the snipplets for the i2c-parents: #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - status = "disabled"; gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */ &gpio5 5 GPIO_ACTIVE_HIGH /* scl */ >; diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt index 50b25c3da186..3b30e54ae3c7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt @@ -22,7 +22,6 @@ Example: interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; clock-frequency = <100000>; - status = "ok"; energymicro,location = <3>; eeprom@50 { diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index 656716b72cc4..f64064f8bdc2 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -71,5 +71,4 @@ Example: reset-names = "i2c"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt index caaaed765ce4..7b1b1e4086d4 100644 --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt @@ -37,5 +37,4 @@ For example: clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; clock-names = "tsc_clk"; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt index 0bcae5140bc5..9ada5abd45fa 100644 --- a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt @@ -17,5 +17,4 @@ adc0: adc@400e3000 { clocks = <&ccu1 CLK_APB3_ADC0>; vref-supply = <®_vdda>; resets = <&rgu 40>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt new file mode 100644 index 000000000000..a04aa5c04103 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt @@ -0,0 +1,27 @@ +STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter + +STM32 Low-Power Timer provides several counter modes. It can be used as: +- quadrature encoder to detect angular position and direction of rotary + elements, from IN1 and IN2 input signals. +- simple counter from IN1 input signal. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-counter". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes, + to set IN1/IN2 pins in mode of operation for Low-Power + Timer input on external pin. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt index 7d6647d4af5e..42db783c4e75 100644 --- a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt +++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt @@ -16,5 +16,4 @@ dac: dac@400e1000 { clocks = <&ccu1 CLK_APB3_DAC>; vref-supply = <®_vdda>; resets = <&rgu 42>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt new file mode 100644 index 000000000000..85e6806b17d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt @@ -0,0 +1,23 @@ +STMicroelectronics STM32 Low-Power Timer Trigger + +STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used +by STM32 internal ADC and/or DAC. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-trigger". +- reg: Identify trigger hardware block. Must be 0, 1 or 2 + respectively for lptimer1, lptimer2 or lptimer3 + trigger output. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index 1852906517ab..23e3abc3fdef 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -22,6 +22,8 @@ Optional properties for main touchpad device: experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. +- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) + Example: touch@4b { diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt index b77f50bd6403..262deab73588 100644 --- a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt @@ -72,7 +72,6 @@ Example: /* Required Board specific properties */ keypad,num-rows = <5>; keypad,num-columns = <5>; - status = "okay"; linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */ MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */ diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index ee09c8f4474a..4c5312eaaa85 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -43,7 +43,7 @@ haptics: haptics@5a { mode = <DRV260X_LRA_MODE>; library-sel = <DRV260X_LIB_LRA>; vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; + vib-overdrive-mv = <3200>; } For more product information please see the link below: diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt index 9d9e930f3251..df531b5b6a0d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt @@ -32,5 +32,4 @@ Example: pinctrl-1 = <&pinctrl_touchctrl_default>; pinctrl-2 = <&pinctrl_touchctrl_gpios>; vf50-ts-min-pressure = <200>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index d4927c202aef..e67e58b61706 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -35,5 +35,4 @@ Example: measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; touchscreen-average-samples = <32>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt new file mode 100644 index 000000000000..12c5ef26ec73 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -0,0 +1,71 @@ +Analog devices AS3645A device tree bindings + +The AS3645A flash LED controller can drive two LEDs, one high current +flash LED and one indicator LED. The high current flash LED can be +used in torch mode as well. + +Ranges below noted as [a, b] are closed ranges between a and b, i.e. a +and b are included in the range. + +Please also see common.txt in the same directory. + + +Required properties +=================== + +compatible : Must be "ams,as3645a". +reg : The I2C address of the device. Typically 0x30. + + +Required properties of the "flash" child node +============================================= + +flash-timeout-us: Flash timeout in microseconds. The value must be in + the range [100000, 850000] and divisible by 50000. +flash-max-microamp: Maximum flash current in microamperes. Has to be + in the range between [200000, 500000] and + divisible by 20000. +led-max-microamp: Maximum torch (assist) current in microamperes. The + value must be in the range between [20000, 160000] and + divisible by 20000. +ams,input-max-microamp: Maximum flash controller input current. The + value must be in the range [1250000, 2000000] + and divisible by 50000. + + +Optional properties of the "flash" child node +============================================= + +label : The label of the flash LED. + + +Required properties of the "indicator" child node +================================================= + +led-max-microamp: Maximum indicator current. The allowed values are + 2500, 5000, 7500 and 10000. + +Optional properties of the "indicator" child node +================================================= + +label : The label of the indicator LED. + + +Example +======= + + as3645a@30 { + reg = <0x30>; + compatible = "ams,as3645a"; + flash { + flash-timeout-us = <150000>; + flash-max-microamp = <320000>; + led-max-microamp = <60000>; + ams,input-max-microamp = <1750000>; + label = "as3645a:flash"; + }; + indicator { + led-max-microamp = <10000>; + label = "as3645a:indicator"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt new file mode 100644 index 000000000000..cbe8dfd29715 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt @@ -0,0 +1,14 @@ +Device tree bindings for IR LED connected through gpio pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "gpio-ir-tx". + - gpios : Should specify the IR LED GPIO, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs + should be indicated using flags in the GPIO specifier. + +Example: + irled@0 { + compatible = "gpio-ir-tx"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt new file mode 100644 index 000000000000..66e5672c2e3d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt @@ -0,0 +1,13 @@ +Device tree bindings for IR LED connected through pwm pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "pwm-ir-tx". + - pwms : PWM property to point to the PWM device (phandle)/port (id) + and to specify the period time to be used: <&phandle id period_ns>; + +Example: + irled { + compatible = "pwm-ir-tx"; + pwms = <&pwm0 0 10000000>; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt index 76535ca37120..a48dda268f81 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -18,6 +18,9 @@ LED sub-node properties: see Documentation/devicetree/bindings/leds/common.txt - retain-state-suspended: (optional) The suspend state can be retained.Such as charge-led gpio. +- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. + Useful in BMC systems, for example when the BMC is rebooted while the host + remains up. - panic-indicator : (optional) see Documentation/devicetree/bindings/leds/common.txt diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt new file mode 100644 index 000000000000..7984efb767b4 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt @@ -0,0 +1,88 @@ +* NXP - pca955x LED driver + +The PCA955x family of chips are I2C LED blinkers whose pins not used +to control LEDs can be used as general purpose I/Os. The GPIO pins can +be input or output, and output pins can also be pulse-width controlled. + +Required properties: +- compatible : should be one of : + "nxp,pca9550" + "nxp,pca9551" + "nxp,pca9552" + "nxp,pca9553" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: I2C slave address. depends on the model. + +Optional properties: +- gpio-controller: allows pins to be used as GPIOs. +- #gpio-cells: must be 2. +- gpio-line-names: define the names of the GPIO lines + +LED sub-node properties: +- reg : number of LED line. + from 0 to 1 for the pca9550 + from 0 to 7 for the pca9551 + from 0 to 15 for the pca9552 + from 0 to 3 for the pca9553 +- type: (optional) either + PCA9532_TYPE_NONE + PCA9532_TYPE_LED + PCA9532_TYPE_GPIO + see dt-bindings/leds/leds-pca955x.h (default to LED) +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15"; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@0 { + label = "red:power"; + linux,default-trigger = "default-on"; + reg = <0>; + type = <PCA955X_TYPE_LED>; + }; + led@1 { + label = "green:power"; + reg = <1>; + type = <PCA955X_TYPE_LED>; + }; + led@2 { + label = "pca9552:yellow"; + reg = <2>; + type = <PCA955X_TYPE_LED>; + }; + led@3 { + label = "pca9552:white"; + reg = <3>; + type = <PCA955X_TYPE_LED>; + }; +}; diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt new file mode 100644 index 000000000000..21ffb5ed8183 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -0,0 +1,95 @@ +* Analog Devices ADV748X video decoder with HDMI receiver + +The ADV7481 and ADV7482 are multi format video decoders with an integrated +HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB +from three input sources HDMI, analog and TTL. + +Required Properties: + + - compatible: Must contain one of the following + - "adi,adv7481" for the ADV7481 + - "adi,adv7482" for the ADV7482 + + - reg: I2C slave address + +Optional Properties: + + - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or + "intrq3". All interrupts are optional. The "intrq3" interrupt + is only available on the adv7481 + - interrupts: Specify the interrupt lines for the ADV748x + +The device node must contain one 'port' child node per device input and output +port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes +are numbered as follows. + + Name Type Port + --------------------------------------- + AIN0 sink 0 + AIN1 sink 1 + AIN2 sink 2 + AIN3 sink 3 + AIN4 sink 4 + AIN5 sink 5 + AIN6 sink 6 + AIN7 sink 7 + HDMI sink 8 + TTL sink 9 + TXA source 10 + TXB source 11 + +The digital output port nodes must contain at least one endpoint. + +Ports are optional if they are not connected to anything at the hardware level. + +Example: + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio6>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@10 { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@11 { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt new file mode 100644 index 000000000000..b88dcdd41def --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt @@ -0,0 +1,9 @@ +Dongwoon Anatech DW9714 camera voice coil lens driver + +DW9174 is a 10-bit DAC with current sink capability. It is intended +for driving voice coil lenses in camera modules. + +Mandatory properties: + +- compatible: "dongwoon,dw9714" +- reg: I²C slave address diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt new file mode 100644 index 000000000000..8671bdb08080 --- /dev/null +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt @@ -0,0 +1,28 @@ +* Amlogic Meson AO-CEC driver + +The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is +to handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be following + "amlogic,meson-gx-ao-cec" + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : AO-CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to AO-CEC clock. + - clock-names : from common clock binding: must contain "core", + corresponding to entry in the clocks property. + - hdmi-phandle: phandle to the HDMI controller + +Example: + +cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; + hdmi-phandle = <&hdmi_tx>; +}; diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt index 2be2005577d6..5e18087ce11f 100644 --- a/Documentation/devicetree/bindings/media/mtk-cir.txt +++ b/Documentation/devicetree/bindings/media/mtk-cir.txt @@ -2,10 +2,14 @@ Device-Tree bindings for Mediatek consumer IR controller found in Mediatek SoC family Required properties: -- compatible : "mediatek,mt7623-cir" +- compatible : Should be + "mediatek,mt7623-cir": for MT7623 SoC + "mediatek,mt7622-cir": for MT7622 SoC - clocks : list of clock specifiers, corresponding to entries in clock-names property; -- clock-names : should contain "clk" entries; +- clock-names : should contain + - "clk" entries: for MT7623 SoC + - "clk", "bus" entries: for MT7622 SoC - interrupts : should contain IR IRQ number; - reg : should contain IO map address for IR. diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt index 11f5b5d51af8..bc03ec096269 100644 --- a/Documentation/devicetree/bindings/media/pxa-camera.txt +++ b/Documentation/devicetree/bindings/media/pxa-camera.txt @@ -24,7 +24,6 @@ Example: clock-frequency = <50000000>; clock-output-names = "qci_mclk"; - status = "okay"; port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt new file mode 100644 index 000000000000..cadecebc73f7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt @@ -0,0 +1,197 @@ +Qualcomm Camera Subsystem + +* Properties + +- compatible: + Usage: required + Value type: <stringlist> + Definition: Should contain: + - "qcom,msm8916-camss" +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: Register ranges as listed in the reg-names property. +- reg-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "csiphy0" + - "csiphy0_clk_mux" + - "csiphy1" + - "csiphy1_clk_mux" + - "csid0" + - "csid1" + - "ispif" + - "csi_clk_mux" + - "vfe0" +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: Interrupts as listed in the interrupt-names property. +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "csiphy0" + - "csiphy1" + - "csid0" + - "csid1" + - "ispif" + - "vfe0" +- power-domains: + Usage: required + Value type: <prop-encoded-array> + Definition: A phandle and power domain specifier pairs to the + power domain which is responsible for collapsing + and restoring power to the peripheral. +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and clock specifier pairs as listed + in clock-names property. +- clock-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the following entries: + - "camss_top_ahb" + - "ispif_ahb" + - "csiphy0_timer" + - "csiphy1_timer" + - "csi0_ahb" + - "csi0" + - "csi0_phy" + - "csi0_pix" + - "csi0_rdi" + - "csi1_ahb" + - "csi1" + - "csi1_phy" + - "csi1_pix" + - "csi1_rdi" + - "camss_ahb" + - "camss_vfe_vfe" + - "camss_csi_vfe" + - "iface" + - "bus" +- vdda-supply: + Usage: required + Value type: <phandle> + Definition: A phandle to voltage supply for CSI2. +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + +* Nodes + +- ports: + Usage: required + Definition: As described in video-interfaces.txt in same directory. + Properties: + - reg: + Usage: required + Value type: <u32> + Definition: Selects CSI2 PHY interface - PHY0 or PHY1. + Endpoint node properties: + - clock-lanes: + Usage: required + Value type: <u32> + Definition: The physical clock lane index. The value + must always be <1> as the physical clock + lane is lane 1. + - data-lanes: + Usage: required + Value type: <prop-encoded-array> + Definition: An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. + +* An Example + + camss: camss@1b00000 { + compatible = "qcom,msm8916-camss"; + reg = <0x1b0ac00 0x200>, + <0x1b00030 0x4>, + <0x1b0b000 0x200>, + <0x1b00038 0x4>, + <0x1b08000 0x100>, + <0x1b08400 0x100>, + <0x1b0a000 0x500>, + <0x1b00020 0x10>, + <0x1b10000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + interrupts = <GIC_SPI 78 0>, + <GIC_SPI 79 0>, + <GIC_SPI 51 0>, + <GIC_SPI 52 0>, + <GIC_SPI 55 0>, + <GIC_SPI 57 0>; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + power-domains = <&gcc VFE_GDSC>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + clock-names = "camss_top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "camss_ahb", + "camss_vfe_vfe", + "camss_csi_vfe", + "iface", + "bus"; + vdda-supply = <&pm8916_l2>; + iommus = <&apps_iommu 3>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt index 39516b94c28f..0d8974aa8b38 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.txt +++ b/Documentation/devicetree/bindings/media/renesas,drif.txt @@ -40,6 +40,7 @@ To summarize, Required properties of an internal channel: ------------------------------------------- - compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. + "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt index 1b1a10ba48ce..6f3756da900f 100644 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt @@ -33,5 +33,4 @@ hdmicec: cec@100B0000 { hdmi-phandle = <&hdmi>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 922d6f8e74be..e4e15d8d7521 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -166,7 +166,6 @@ Example: clock-output-names = "cam_a_clkout", "cam_b_clkout"; pinctrl-names = "default"; pinctrl-0 = <&cam_port_a_clk_active>; - status = "okay"; #address-cells = <1>; #size-cells = <1>; @@ -189,7 +188,6 @@ Example: compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; interrupts = <0 85 0>; - status = "okay"; }; csis_0: csis@11880000 { diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index cc51b1fd6e0c..6af3fc210ecc 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -52,7 +52,6 @@ Example: c8sectpfe@08a20000 { compatible = "st,stih407-c8sectpfe"; - status = "okay"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt index df7182a63e59..e47c7ccc57f1 100644 --- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt @@ -59,7 +59,6 @@ I2C-connected TVP5147 decoder: tvp5147@5d { compatible = "ti,tvp5147"; reg = <0x5d>; - status = "okay"; port { composite_in: endpoint { diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 9cd2a369125d..852041a7480c 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -76,6 +76,11 @@ Optional endpoint properties mode horizontal and vertical synchronization signals are provided to the slave device (data source) by the master device (data sink). In the master mode the data source device is also the source of the synchronization signals. +- bus-type: data bus type. Possible values are: + 0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656) + 1 - MIPI CSI-2 C-PHY + 2 - MIPI CSI1 + 3 - CCP2 - bus-width: number of data lines actively used, valid for the parallel busses. - data-shift: on the parallel data busses, if bus-width is used to specify the number of data lines, data-shift can be used to specify which data lines are @@ -112,7 +117,8 @@ Optional endpoint properties should be the combined length of data-lanes and clock-lanes properties. If the lane-polarities property is omitted, the value must be interpreted as 0 (normal). This property is valid for serial busses only. - +- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used + with CCP2, for instance. Example ------- diff --git a/Documentation/devicetree/bindings/media/zx-irdec.txt b/Documentation/devicetree/bindings/media/zx-irdec.txt new file mode 100644 index 000000000000..295b9fab593e --- /dev/null +++ b/Documentation/devicetree/bindings/media/zx-irdec.txt @@ -0,0 +1,14 @@ +IR Decoder (IRDEC) on ZTE ZX family SoCs + +Required properties: + - compatible: Should be "zte,zx296718-irdec". + - reg: Physical base address and length of IRDEC registers. + - interrupts: Interrupt number of IRDEC. + +Exmaples: + + irdec: ir-decoder@111000 { + compatible = "zte,zx296718-irdec"; + reg = <0x111000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt index 1ee3bc09f319..8b9388cc1ccc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt @@ -130,7 +130,6 @@ The reg property implicitly specifies the chip select as this: Example: devbus-bootcs@d0010400 { - status = "okay"; ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */ #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt index 462819ac3da8..e6f168db6c72 100644 --- a/Documentation/devicetree/bindings/mfd/act8945a.txt +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -12,7 +12,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; active-semi,vsel-high; @@ -79,6 +78,5 @@ Example: active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt index eec40be7f79a..3f643ef121ff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -25,7 +25,6 @@ Example: clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt index 26eeed373934..1103ce2030fb 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be one of the following "atmel,at91sam9260-smc", "syscon" "atmel,sama5d3-smc", "syscon" + "atmel,sama5d2-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index aca09af66514..9455503b0299 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -7,7 +7,14 @@ axp209 (X-Powers) axp221 (X-Powers) axp223 (X-Powers) axp803 (X-Powers) +axp806 (X-Powers) axp809 (X-Powers) +axp813 (X-Powers) + +The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything +other than the packaging. Pins are routed separately. As such they should +be treated as separate entities. The other half is an AC100 RTC/codec +combo chip. Please see ./ac100.txt for its bindings. Required properties: - compatible: should be one of: @@ -19,6 +26,7 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp809" + * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin @@ -28,12 +36,14 @@ Required properties: Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/80X: range: 1800-4050, Default: 3 MHz + AXP22X/8XX: range: 1800-4050, Default: 3 MHz -- x-powers,drive-vbus-en: axp221 / axp223 only boolean, set this when the - N_VBUSEN pin is used as an output pin to control an external - regulator to drive the OTG VBus, rather then as an input pin - which signals whether the board is driving OTG VBus or not. +- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is + used as an output pin to control an external + regulator to drive the OTG VBus, rather then + as an input pin which signals whether the + board is driving OTG VBus or not. + (axp221 / axp223 / axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. @@ -171,6 +181,36 @@ LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on SW : On/Off Switch : swin-supply +AXP813 regulators, type, and corresponding input supply names: + +Regulator Type Supply Name Notes +--------- ---- ----------- ----- +DCDC1 : DC-DC buck : vin1-supply +DCDC2 : DC-DC buck : vin2-supply : poly-phase capable +DCDC3 : DC-DC buck : vin3-supply : poly-phase capable +DCDC4 : DC-DC buck : vin4-supply +DCDC5 : DC-DC buck : vin5-supply : poly-phase capable +DCDC6 : DC-DC buck : vin6-supply : poly-phase capable +DCDC7 : DC-DC buck : vin7-supply +ALDO1 : LDO : aldoin-supply : shared supply +ALDO2 : LDO : aldoin-supply : shared supply +ALDO3 : LDO : aldoin-supply : shared supply +DLDO1 : LDO : dldoin-supply : shared supply +DLDO2 : LDO : dldoin-supply : shared supply +DLDO3 : LDO : dldoin-supply : shared supply +DLDO4 : LDO : dldoin-supply : shared supply +ELDO1 : LDO : eldoin-supply : shared supply +ELDO2 : LDO : eldoin-supply : shared supply +ELDO3 : LDO : eldoin-supply : shared supply +FLDO1 : LDO : fldoin-supply : shared supply +FLDO2 : LDO : fldoin-supply : shared supply +FLDO3 : LDO : fldoin-supply : shared supply +LDO_IO0 : LDO : ips-supply : GPIO 0 +LDO_IO1 : LDO : ips-supply : GPIO 1 +RTC_LDO : LDO : ips-supply : always on +SW : On/Off Switch : swin-supply +DRIVEVBUS : Enable output : drivevbus-supply : external regulator + Example: axp209: pmic@34 { diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt new file mode 100644 index 000000000000..9ab216a851d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt @@ -0,0 +1,49 @@ +* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings + +Required properties: + - compatible : Should be "rohm,bd9571mwv". + - reg : I2C slave address. + - interrupt-parent : Phandle to the parent interrupt controller. + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : Marks the device node as an interrupt controller. + - #interrupt-cells : The number of cells to describe an IRQ, should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as trigger + masks from ../interrupt-controller/interrupts.txt. + - gpio-controller : Marks the device node as a GPIO Controller. + - #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - regulators: : List of child nodes that specify the regulator + initialization data. Child nodes must be named + after their hardware counterparts: + - vd09 + - vd18 + - vd25 + - vd33 + - dvfs + Each child node is defined using the standard + binding for regulators. + +Example: + + pmic: pmic@30 { + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt index 9554292dc6cb..07c69c0c6624 100644 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -4,6 +4,14 @@ Required properties: - compatible : Should be "dlg,da9052", "dlg,da9053-aa", "dlg,da9053-ab", or "dlg,da9053-bb" +Optional properties: +- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen + input lines are used as general purpose analogue + input. +- tsiref-supply: Phandle to the regulator, which provides the reference + voltage for the TSIREF pin. Must be provided when the + touchscreen pins are used for ADC purposes. + Sub-nodes: - regulators : Contain the regulator nodes. The DA9052/53 regulators are bound using their names as listed below: @@ -29,7 +37,6 @@ Sub-nodes: Examples: i2c@63fc8000 { /* I2C1 */ - status = "okay"; pmic: dialog@48 { compatible = "dlg,da9053-aa"; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 8aba48821a85..39ba4146769d 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ - status = "okay"; pmic: mc13892@0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt index 555fb117d4fa..755cbef0647d 100644 --- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt @@ -26,7 +26,6 @@ Example for i.MX23 SoC: compatible = "fsl,imx23-lradc"; reg = <0x80050000 0x2000>; interrupts = <36 37 38 39 40 41 42 43 44>; - status = "okay"; fsl,lradc-touchscreen-wires = <4>; fsl,ave-ctrl = <4>; fsl,ave-delay = <2>; @@ -39,7 +38,6 @@ Example for i.MX28 SoC: compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; - status = "okay"; fsl,lradc-touchscreen-wires = <5>; fsl,ave-ctrl = <4>; fsl,ave-delay = <2>; diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt new file mode 100644 index 000000000000..876242394a16 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/retu.txt @@ -0,0 +1,25 @@ +* Device tree bindings for Nokia Retu and Tahvo multi-function device + +Retu and Tahvo are a multi-function devices found on Nokia Internet +Tablets (770, N800 and N810). The Retu chip provides watchdog timer +and power button control functionalities while Tahvo chip provides +USB transceiver functionality. + +Required properties: +- compatible: "nokia,retu" or "nokia,tahvo" +- reg: Specifies the CBUS slave address of the ASIC chip +- interrupts: The interrupt line the device is connected to +- interrupt-parent: The parent interrupt controller + +Example: + +cbus0 { + compatible = "i2c-cbus-gpio"; + ... + retu: retu@1 { + compatible = "nokia,retu"; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + reg = <0x1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt index 9636ae8d8d41..91b65227afeb 100644 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/Documentation/devicetree/bindings/mfd/rk808.txt @@ -1,11 +1,14 @@ RK8XX Power Management Integrated Circuit The rk8xx family current members: +rk805 rk808 rk818 Required properties: -- compatible: "rockchip,rk808", "rockchip,rk818" +- compatible: "rockchip,rk805" +- compatible: "rockchip,rk808" +- compatible: "rockchip,rk818" - reg: I2C slave address - interrupt-parent: The parent interrupt controller. - interrupts: the interrupt outputs of the controller. @@ -18,6 +21,14 @@ Optional properties: - rockchip,system-power-controller: Telling whether or not this pmic is controlling the system power. +Optional RK805 properties: +- vcc1-supply: The input supply for DCDC_REG1 +- vcc2-supply: The input supply for DCDC_REG2 +- vcc3-supply: The input supply for DCDC_REG3 +- vcc4-supply: The input supply for DCDC_REG4 +- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 +- vcc6-supply: The input supply for LDO_REG3 + Optional RK808 properties: - vcc1-supply: The input supply for DCDC_REG1 - vcc2-supply: The input supply for DCDC_REG2 @@ -56,6 +67,15 @@ by a child node of the 'regulators' node. /* standard regulator bindings here */ }; +Following regulators of the RK805 PMIC regulators are supported. Note that +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO +number as described in RK805 datasheet. + + - DCDC_REGn + - valid values for n are 1 to 4. + - LDO_REGn + - valid values for n are 1 to 3 + Following regulators of the RK808 PMIC block are supported. Note that the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO number as described in RK808 datasheet. diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt index df664018c148..d759da606f75 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt @@ -57,7 +57,6 @@ audio-subsystem { clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; - status = "disabled"; }; serial_3: serial@11460000 { @@ -69,6 +68,5 @@ audio-subsystem { clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart_aud_bus>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt new file mode 100644 index 000000000000..2a9ff29db9c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt @@ -0,0 +1,48 @@ +STMicroelectronics STM32 Low-Power Timer + +The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several +functions: +- PWM output (with programmable prescaler, configurable polarity) +- Quadrature encoder, counter +- Trigger source for STM32 ADC/DAC (LPTIM_OUT) + +Required properties: +- compatible: Must be "st,stm32-lptimer". +- reg: Offset and length of the device's register set. +- clocks: Phandle to the clock used by the LP Timer module. +- clock-names: Must be "mux". +- #address-cells: Should be '<1>'. +- #size-cells: Should be '<0>'. + +Optional subnodes: +- pwm: See ../pwm/pwm-stm32-lp.txt +- counter: See ../iio/timer/stm32-lptimer-cnt.txt +- trigger: See ../iio/timer/stm32-lptimer-trigger.txt + +Example: + + timer@40002400 { + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&timer_clk>; + clock-names = "mux"; + #address-cells = <1>; + #size-cells = <0>; + + pwm { + compatible = "st,stm32-pwm-lp"; + pinctrl-names = "default"; + pinctrl-0 = <&lppwm1_pins>; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt new file mode 100644 index 000000000000..93602c7a19c8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -0,0 +1,17 @@ +* Device tree bindings for TI TPS61050/61052 Boost Converters + +The TP61050/TPS61052 is a high-power "white LED driver". The +device provides LED, GPIO and regulator functionalities. + +Required properties: +- compatible: "ti,tps61050" or "ti,tps61052" +- reg: Specifies the I2C slave address + +Example: + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt new file mode 100644 index 000000000000..088eff9ddb78 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -0,0 +1,39 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor + +RAVE Supervisory Processor communicates with SoC over UART. It is +expected that its Device Tree node is specified as a child of a node +corresponding to UART controller used for communication. + +Required parent device properties: + + - compatible: Should be one of: + - "zii,rave-sp-niu" + - "zii,rave-sp-mezz" + - "zii,rave-sp-esb" + - "zii,rave-sp-rdu1" + - "zii,rave-sp-rdu2" + + - current-speed: Should be set to baud rate SP device is using + +RAVE SP consists of the following sub-devices: + +Device Description +------ ----------- +rave-sp-wdt : Watchdog +rave-sp-nvmem : Interface to onborad EEPROM +rave-sp-backlight : Display backlight +rave-sp-hwmon : Interface to onboard hardware sensors +rave-sp-leds : Interface to onboard LEDs +rave-sp-input : Interface to onboard power button + +Example of usage: + + rdu { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; + diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index f8629bb73945..f9fb412642fe 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -47,5 +47,4 @@ ssc0: ssc@f0010000 { dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 49df630bd44f..60481bfc3d31 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -74,5 +74,4 @@ Example: phys = <&emmc_phy>; phy-names = "phy_arasan"; #clock-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt index e5a0140b2381..516fb0143d4c 100644 --- a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt @@ -24,7 +24,6 @@ mmc0: mmc@1c40000 { compatible = "ti,da830-mmc", reg = <0x40000 0x1000>; interrupts = <16>; - status = "okay"; bus-width = <4>; max-frequency = <50000000>; dmas = <&edma 16 diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt index db442355cd24..184ccffe2739 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt @@ -20,5 +20,4 @@ sdhci1: sdhci@10014000 { dma-names = "rx-tx"; bus-width = <4>; cd-gpios = <&gpio3 29>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt index a70fcd65b9ea..8d2d71758907 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-card.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt @@ -21,7 +21,6 @@ Example: vmmc-supply = <®_vcc3v3>; bus-width = <8>; non-removable; - status = "okay"; mmccard: mmccard@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index c7f4a0ec48ed..b32ade645ad9 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -153,7 +153,6 @@ mmc3: mmc@01c12000 { bus-width = <4>; non-removable; mmc-pwrseq = <&sdhci0_pwrseq> - status = "okay"; brcmf: bcrmf@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt index 84f0ebd67a13..10f0818a34c5 100644 --- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt +++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt @@ -13,5 +13,4 @@ Example: reg = <0xd00d4000 0x200>; interrupts = <54>; clocks = <&gateclk 17>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt index c32dc5a9dbe6..5ff1e12c655a 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -11,6 +11,8 @@ Required properties: - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs + - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs + - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs @@ -21,7 +23,7 @@ Required properties: - interrupts: Some SoCs have only 1 shared interrupt, while others have either 2 or 3 individual interrupts (error, int, card detect). Below is the number of interrupts for each SoC: - 1: r8a73a4, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794 + 1: r8a73a4, r8a7743, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794 2: r8a7740, sh73a0 3: r7s72100 diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index 49ed3ad2524a..c6558785e61b 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -15,6 +15,7 @@ Required Properties: - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 + - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 230fd696eb92..e35645598315 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -63,7 +63,6 @@ Example: mmc0: sdhci@fe81e000 { compatible = "st,sdhci"; - status = "disabled"; reg = <0xfe81e000 0x1000>; interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; interrupt-names = "mmcirq"; @@ -77,7 +76,6 @@ mmc0: sdhci@fe81e000 { mmc1: sdhci@09080000 { compatible = "st,sdhci-stih407", "st,sdhci"; - status = "disabled"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; @@ -94,7 +92,6 @@ mmc1: sdhci@09080000 { mmc0: sdhci@09060000 { compatible = "st,sdhci-stih407", "st,sdhci"; - status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 7d53a799f140..63b57e2a10fb 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -12,6 +12,7 @@ Required properties: * "allwinner,sun4i-a10-mmc" * "allwinner,sun5i-a13-mmc" * "allwinner,sun7i-a20-mmc" + * "allwinner,sun8i-a83t-emmc" * "allwinner,sun9i-a80-mmc" * "allwinner,sun50i-a64-emmc" * "allwinner,sun50i-a64-mmc" diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 4fd8b7acc510..54ef642f23a0 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -15,6 +15,8 @@ Required properties: "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC + "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC @@ -33,10 +35,8 @@ Required properties: If 2 clocks are specified by the hardware, you must name them as "core" and "cd". If the controller only has 1 clock, naming is not required. - Below is the number clocks for each supported SoC: - 1: SH73A0, R8A73A4, R8A7740, R8A7778, R8A7779, R8A7790 - R8A7791, R8A7792, R8A7793, R8A7794, R8A7795, R8A7796 - 2: R7S72100 + Devices which have more than 1 clock are listed below: + 2: R7S72100 Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt index 906819a90c2b..0f59bd5361f5 100644 --- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -28,5 +28,4 @@ Example: max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt index 489807005eda..b93c1e2f25dd 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt @@ -24,7 +24,6 @@ spi@f0020000 { #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; - status = "okay"; m25p80@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 5ded66ad7aef..840f9405dcf0 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -37,7 +37,6 @@ nor_flash: spi@1100d000 { clock-names = "spi", "sf"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; flash@0 { compatible = "jedec,spi-nor"; diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt index c2489391c437..54cef9ef3083 100644 --- a/Documentation/devicetree/bindings/mtd/st-fsm.txt +++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt @@ -21,6 +21,5 @@ Example: st,syscfg = <&syscfg_rear>; st,boot-device-reg = <0x958>; st,boot-device-spi = <0x1a>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index f322f56aef74..a37c67bcb43b 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -41,7 +41,6 @@ nfc: nand@01c03000 { #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; nand@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ad16c1f481f7..0bfad656a9ff 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -27,5 +27,4 @@ amac0: ethernet@18022000 { <0x18110000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index 01fa2d4188d4..9c5e663fa1af 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -29,7 +29,6 @@ Example: Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: &usb_host1_ehci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 9e331777c203..78138333ff7a 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -56,7 +56,6 @@ m_can1: can@020e8000 { <&clks IMX6SX_CLK_CANFD>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; - status = "disabled"; }; Board dts: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 0ab8b39d0b30..fd23904ac68e 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; id = <1>; - status = "okay"; ksz9477: ksz9477@0 { compatible = "microchip,ksz9477"; @@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: spi-cpha; spi-cpol; - status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 04f2965a4467..4448d063ddf6 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -27,7 +27,6 @@ Example: I2C managed mode: master: masterdevice@X { - status = "okay"; fixed-link { /* RMII fixed link to LAN9303 */ speed = <100>; @@ -38,7 +37,6 @@ I2C managed mode: switch: switch@a { compatible = "smsc,lan9303-i2c"; reg = <0xa>; - status = "okay"; reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; reset-duration = <200>; @@ -67,7 +65,6 @@ I2C managed mode: MDIO managed mode: master: masterdevice@X { - status = "okay"; phy-handle = <&switch>; mdio { diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt index c1ce1680246f..72e7aaf7242e 100644 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt @@ -30,6 +30,5 @@ Example: compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; - status = "okay"; use-ncsi; }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index ae4234ca4ee4..bedcfd5a52cd 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -41,7 +41,6 @@ ethernet@70000 { interrupts = <8>; clocks = <&gate_clk 4>; tx-csum-limit = <9800> - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; buffer-manager = <&bm>; diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 9be1059ff03f..3d27c68613a6 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in below example). &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; @@ -70,7 +69,6 @@ below example). Example for USB device: &usb_host1_ohci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt index c1b1d7c3bde1..07b31050dbe5 100644 --- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt +++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt @@ -31,7 +31,6 @@ bm: bm@c8000 { reg = <0xc8000 0xac>; clocks = <&gateclk 13>; internal-mem = <&bm_bppi>; - status = "okay"; pool2,capacity = <4096>; pool1,pkt-size = <512>; }; @@ -45,5 +44,4 @@ bm_bppi: bm-bppi { #address-cells = <1>; #size-cells = <1>; clocks = <&gateclk 13>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index c78f3187dfea..7e2dad08a12e 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -57,12 +57,10 @@ ethernet@f0000 { <0xc5000 0x100>; clocks = <&gateclk 3>, <&gateclk 19>; clock-names = "pp_clk", "gop_clk"; - status = "okay"; eth0: eth0@c4000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; - status = "okay"; phy = <&phy0>; phy-mode = "gmii"; }; @@ -70,7 +68,6 @@ ethernet@f0000 { eth1: eth1@c5000 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; - status = "okay"; phy = <&phy3>; phy-mode = "gmii"; }; diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index 0703ad3f3c1e..354dd9896bb5 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -66,5 +66,4 @@ Example for GXBB: <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index c35b5b428a7f..42a248301615 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -69,7 +69,6 @@ Examples: }; }; ethernet@70000 { - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt index 1dc3bc75539d..44dff53d4dda 100644 --- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq): compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>; - status = "okay"; enc28j60: ethernet@0 { compatible = "microchip,enc28j60"; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 76df9173825a..c9b35251bb20 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -25,7 +25,6 @@ Optional I2C-based chip specific properties: Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { - status = "okay"; nfcmrvluart: nfcmrvluart@5 { compatible = "marvell,nfc-uart"; @@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): &i2c1 { - status = "okay"; clock-frequency = <400000>; nfcmrvli2c0: i2c@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index 5b6cd9b3f628..92486733df71 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): &i2c2 { - status = "okay"; npc100: npc100@29 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt index 1aea822d4530..122460e42e3c 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt @@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2): &i2c2 { - status = "okay"; pn532: pn532@24 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index dab69f36167c..538a86f7b2b0 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): &i2c2 { - status = "okay"; pn544: pn544@28 { diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt index fb1e75facf1b..ed5b3eaadb39 100644 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -12,7 +12,6 @@ Required properties: Example: &hsi2c_4 { - status = "okay"; s3fwrn5@27 { compatible = "samsung,s3fwrn5-i2c"; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index 263732e8879f..b46d473be425 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): &i2c2 { - status = "okay"; st21nfcb: st21nfcb@8 { diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt index 711ca85a363d..54ce8e7ac681 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): &mcspi4 { - status = "okay"; st21nfcb: st21nfcb@0 { diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt index 7bb2e213d6f9..5ee9440fa9ad 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): &i2c2 { - status = "okay"; st21nfca: st21nfca@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt index ea3178bc9ddd..08a202e00d47 100644 --- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt +++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt @@ -35,12 +35,10 @@ spi@9840000 { #address-cells = <1>; #size-cells = <0>; cs-gpios = <&pio0 4>; - status = "okay"; st95hf@0{ reg = <0>; compatible = "st,st95hf"; - status = "okay"; spi-max-frequency = <1000000>; enable-gpio = <&pio4 0>; interrupt-parent = <&pio0>; diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 60c833d62181..5ca9362ef127 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -23,7 +23,6 @@ Optional SoC Specific Properties: Example (for ARM-based BeagleBone with TRF7970A on SPI1): &spi1 { - status = "okay"; nfc@0 { compatible = "ti,trf7970a"; @@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): irq-status-read-quirk; en2-rf-quirk; clock-frequency = <27120000>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt index df0534e2eda1..d7117a22fd87 100644 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt @@ -35,5 +35,4 @@ etha: ethernet@40400000 { /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index d3c24d5ffa9a..77d0b2a61ffa 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -2,11 +2,7 @@ PHY nodes Required properties: - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : interrupt specifier for the sole interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer @@ -61,7 +57,7 @@ Example: ethernet-phy@0 { compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <40000>; - interrupts = <35 1>; + interrupt-parent = <&PIC>; + interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 6d9efb2eb9a5..3987846b3fd3 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -41,7 +41,6 @@ ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; - status = "okay"; qca7000: ethernet@0 { compatible = "qca,qca7000"; @@ -78,7 +77,6 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; pinctrl-names = "default"; pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; qca7000: ethernet { compatible = "qca,qca7000"; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index c1325387632c..6af8eed1adeb 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -71,5 +71,4 @@ gmac: ethernet@ff290000 { tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 974edd5c85cc..8b7c719b0bb9 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board. pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethernetphy0: ethernet-phy@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 2e68a3cd8513..b30d04b54ee9 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 { gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; - status = "disabled"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index d05c1e1fd9b6..062c5174add3 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -34,7 +34,6 @@ Example: ethernet0: dwmac@9630000 { device_type = "network"; - status = "disabled"; compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; reg = <0x9630000 0x8000>; reg-names = "stmmaceth"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index c35afb7e956a..489dbcb66c5a 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -18,7 +18,6 @@ Example: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - status = "disabled"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; interrupts = <0 61 0>, <0 62 0>; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 590f622188de..b2bd4704f859 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -29,7 +29,6 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; - status = "okay"; brcmf: wifi@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt index 19331bb4ff6e..6830c4786f8a 100644 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt @@ -21,7 +21,6 @@ Example: mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; - status = "okay"; esp8089: sdio_wifi@1 { compatible = "esp,esp8089"; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 0854451ff91d..59de8646862d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured so that firmware can wakeup host using this device side pin. &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt index 7b2cbb14113e..f42f6b0f1bc7 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added. Example: &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index 74cf52908a6c..0668c45a156d 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -3,7 +3,10 @@ This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs. Required properties: -- compatible: should be "mediatek,mt8173-efuse" or "mediatek,efuse" +- compatible: should be + "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622 + "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623 + "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt index daebce9e6b07..372c72fd64dc 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt @@ -21,5 +21,4 @@ Example for i.MX28: #size-cells = <1>; reg = <0x8002c000 0x2000>; clocks = <&clks 25>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index e36d261b9ba6..9d733af26be7 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -464,7 +464,6 @@ Example 5: opp-supported-hw opp_table { compatible = "operating-points-v2"; - status = "okay"; opp-shared; opp-600000000 { diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt index 35a465362408..b9165b72473c 100644 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -1,11 +1,11 @@ * Freescale 83xx and 512x PCI bridges -Freescale 83xx and 512x SOCs include the same pci bridge core. +Freescale 83xx and 512x SOCs include the same PCI bridge core. 83xx/512x specific notes: - reg: should contain two address length tuples - The first is for the internal pci bridge registers - The second is for the pci config space access registers + The first is for the internal PCI bridge registers + The second is for the PCI config space access registers Example (MPC8313ERDB) pci0: pci@e0008500 { diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt index bbcd9f4c501f..310ef7145c47 100644 --- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt +++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt @@ -33,7 +33,6 @@ Example: pcie0: pcie@d0070000 { compatible = "marvell,armada-3700-pcie"; device_type = "pci"; - status = "disabled"; reg = <0 0xd0070000 0 0x20000>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 2951a6a50704..495880193adc 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -7,21 +7,21 @@ Required properties: "Txs": TX slave port region "Cra": Control register access region - interrupt-parent: interrupt source phandle. -- interrupts: specifies the interrupt source of the parent interrupt controller. - The format of the interrupt specifier depends on the parent interrupt - controller. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends + on the parent interrupt controller. - device_type: must be "pci" - #address-cells: set to <3> -- #size-cells: set to <2> +- #size-cells: set to <2> - #interrupt-cells: set to <1> -- ranges: describes the translation of addresses for root ports and standard - PCI regions. +- ranges: describes the translation of addresses for root ports and + standard PCI regions. - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. Optional properties: -- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe - controller. +- msi-parent: Link to the hardware entity that serves as the MSI controller + for this PCIe controller. - bus-range: PCI bus numbers covered Example @@ -45,5 +45,5 @@ Example <0 0 0 3 &pcie_0 3>, <0 0 0 4 &pcie_0 4>; ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 - 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt index 5ecaea1e6eee..4e4aee4439ea 100644 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt @@ -6,7 +6,7 @@ and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "axis,artpec6-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller (DBI), - the phy controller, and configuration address space. + the PHY controller, and configuration address space. - reg-names: Must include the following entries: - "dbi" - "phy" diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index b2480dd38c11..1da7ade3183c 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,4 +1,4 @@ -* Synopsys Designware PCIe interface +* Synopsys DesignWare PCIe interface Required properties: - compatible: should contain "snps,dw-pcie" to identify the core. @@ -17,29 +17,27 @@ RC mode: properties to define the mapping of the PCIe interface to interrupt numbers. EP mode: -- num-ib-windows: number of inbound address translation - windows -- num-ob-windows: number of outbound address translation - windows +- num-ib-windows: number of inbound address translation windows +- num-ob-windows: number of outbound address translation windows Optional properties: - num-lanes: number of lanes to use (this property should be specified unless the link is brought already up in BIOS) -- reset-gpio: gpio pin number of power good signal +- reset-gpio: GPIO pin number of power good signal - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - "pcie" - "pcie_bus" RC mode: -- num-viewport: number of view ports configured in - hardware. If a platform does not specify it, the driver assumes 2. -- bus-range: PCI bus numbers covered (it is recommended - for new devicetrees to specify this property, to keep backwards - compatibility a range of 0x00-0xff is assumed if not present) +- num-viewport: number of view ports configured in hardware. If a platform + does not specify it, the driver assumes 2. +- bus-range: PCI bus numbers covered (it is recommended for new devicetrees + to specify this property, to keep backwards compatibility a range of + 0x00-0xff is assumed if not present) + EP mode: -- max-functions: maximum number of functions that can be - configured +- max-functions: maximum number of functions that can be configured Example configuration: diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index cf92d3ba5a26..7b1e48bf172b 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -1,6 +1,6 @@ * Freescale i.MX6 PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index a339dbb15493..bdb7ab39d2d7 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -1,7 +1,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description -HiSilicon PCIe host controller is based on Designware PCI core. -It shares common functions with PCIe Designware core driver and inherits +HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt. @@ -40,7 +40,6 @@ Hip05 Example (note that Hip06 is the same except compatible): 0x0 0 0 2 &mbigen_pcie 2 11 0x0 0 0 3 &mbigen_pcie 3 12 0x0 0 0 4 &mbigen_pcie 4 13>; - status = "ok"; }; HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. @@ -83,5 +82,4 @@ Example: 0x0 0 0 2 &mbigen_pcie0 650 4 0x0 0 0 3 &mbigen_pcie0 650 4 0x0 0 0 4 &mbigen_pcie0 650 4>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 68ffa0fbcd73..6e217c63123d 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -1,8 +1,8 @@ HiSilicon Kirin SoCs PCIe host DT description -Kirin PCIe host controller is based on Designware PCI core. -It shares common functions with PCIe Designware core driver -and inherits common properties defined in +Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and +inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt. Additional properties are described here: @@ -16,7 +16,7 @@ Required properties "apb": apb Ctrl register defined by Kirin; "phy": apb PHY register defined by Kirin; "config": PCIe configuration space registers. -- reset-gpios: The gpio to generate PCIe perst assert and deassert signal. +- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. Optional properties: diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index ee1c72d5162e..c0484da0f20d 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -15,8 +15,10 @@ Required properties: - compatible: should contain the platform identifier such as: "fsl,ls1021a-pcie", "snps,dw-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" + "fsl,ls2088a-pcie" + "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" -- reg: base addresses and lengths of the PCIe controller +- reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt deleted file mode 100644 index fe80dda9bf73..000000000000 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt +++ /dev/null @@ -1,130 +0,0 @@ -MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs - -PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root -ports supports a Gen2 1-lane Link and has PIPE interface to PHY. - -Required properties: -- compatible: Should contain "mediatek,mt7623-pcie". -- device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe controller. -- #address-cells: Address representation for root ports (must be 3) -- #size-cells: Size representation for root ports (must be 2) -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - free_ck :for reference clock of PCIe subsys - - sys_ck0 :for clock of Port0 - - sys_ck1 :for clock of Port1 - - sys_ck2 :for clock of Port2 -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - pcie-rst0 :port0 reset - - pcie-rst1 :port1 reset - - pcie-rst2 :port2 reset -- phys: List of PHY specifiers (used by generic PHY framework). -- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of PHYs as specified in *phys* property. -- power-domains: A phandle and power domain specifier pair to the power domain - which is responsible for collapsing and restoring power to the peripheral. -- bus-range: Range of bus numbers associated with this controller. -- ranges: Ranges for the PCI memory and I/O regions. - -In addition, the device tree node must have sub-nodes describing each -PCIe port interface, having the following mandatory properties: - -Required properties: -- device_type: Must be "pci" -- reg: Only the first four bytes are used to refer to the correct bus number - and device number. -- #address-cells: Must be 3 -- #size-cells: Must be 2 -- #interrupt-cells: Must be 1 -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- ranges: Sub-ranges distributed from the PCIe controller node. An empty - property is sufficient. -- num-lanes: Number of lanes to use for this port. - -Examples: - - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pcie: pcie-controller@1a140000 { - compatible = "mediatek,mt7623-pcie"; - device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ - <0 0x1a142000 0 0x1000>, /* Port0 registers */ - <0 0x1a143000 0 0x1000>, /* Port1 registers */ - <0 0x1a144000 0 0x1000>; /* Port2 registers */ - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 0>; - interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, - <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, - <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <&hifsys CLK_HIFSYS_PCIE0>, - <&hifsys CLK_HIFSYS_PCIE1>, - <&hifsys CLK_HIFSYS_PCIE2>; - clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; - resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, - <&hifsys MT2701_HIFSYS_PCIE1_RST>, - <&hifsys MT2701_HIFSYS_PCIE2_RST>; - reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; - phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>; - phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; - bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ - 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ - - pcie@0,0 { - device_type = "pci"; - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; - ranges; - num-lanes = <1>; - }; - - pcie@1,0 { - device_type = "pci"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - ranges; - num-lanes = <1>; - }; - - pcie@2,0 { - device_type = "pci"; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - ranges; - num-lanes = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt new file mode 100644 index 000000000000..3a6ce55dd310 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -0,0 +1,284 @@ +MediaTek Gen2 PCIe controller + +Required properties: +- compatible: Should contain one of the following strings: + "mediatek,mt2701-pcie" + "mediatek,mt2712-pcie" + "mediatek,mt7622-pcie" + "mediatek,mt7623-pcie" +- device_type: Must be "pci" +- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg-names: Names of the above areas to use during resource lookup. +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: + Mandatory entries: + - sys_ckN :transaction layer and data link layer clock + Required entries for MT2701/MT7623: + - free_ck :for reference clock of PCIe subsys + Required entries for MT2712/MT7622: + - ahb_ckN :AHB slave interface operating clock for CSR access and RC + initiated MMIO access + Required entries for MT7622: + - axi_ckN :application layer MMIO channel operating clock + - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when + pcie_mac_ck/pcie_pipe_ck is turned off + - obff_ckN :OBFF functional block operating clock + - pipe_ckN :LTSSM and PHY/MAC layer operating clock + where N starting from 0 to one less than the number of root ports. +- phys: List of PHY specifiers (used by generic PHY framework). +- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. +- power-domains: A phandle and power domain specifier pair to the power domain + which is responsible for collapsing and restoring power to the peripheral. +- bus-range: Range of bus numbers associated with this controller. +- ranges: Ranges for the PCI memory and I/O regions. + +Required properties for MT7623/MT2701: +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the + number of root ports. + +Required properties for MT2712/MT7622: +-interrupts: A list of interrupt outputs of the controller, must have one + entry for each PCIe port + +In addition, the device tree node must have sub-nodes describing each +PCIe port interface, having the following mandatory properties: + +Required properties: +- device_type: Must be "pci" +- reg: Only the first four bytes are used to refer to the correct bus number + and device number. +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- #interrupt-cells: Must be 1 +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- num-lanes: Number of lanes to use for this port. + +Examples for MT7623: + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie-controller@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + }; + +Examples for MT2712: + pcie: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>, + <0 0x112ff000 0 0x1000>; + reg-names = "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, + <&pericfg CLK_PERI_PCIE0>, + <&pericfg CLK_PERI_PCIE1>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + +Examples for MT7622: + pcie: pcie@1a140000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, + <0 0x1a143000 0 0x1000>, + <0 0x1a145000 0 0x1000>; + reg-names = "subsys", "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, + <&pciesys CLK_PCIE_P1_MAC_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AHB_EN>, + <&pciesys CLK_PCIE_P0_AUX_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P0_AXI_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P0_OBFF_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P0_PIPE_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", + "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", + "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 2de6f65ecfb1..127ae1f53e5a 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -77,7 +77,7 @@ and the following optional properties: - marvell,pcie-lane: the physical PCIe lane number, for ports having multiple lanes. If this property is not found, we assume that the value is 0. -- reset-gpios: optional gpio to PERST# +- reset-gpios: optional GPIO to PERST# - reset-delay-us: delay in us to wait after reset de-assertion, if not specified will default to 100ms, as required by the PCIe specification. @@ -85,7 +85,6 @@ Example: pcie-controller { compatible = "marvell,armada-xp-pcie"; - status = "disabled"; device_type = "pci"; #address-cells = <3>; @@ -147,7 +146,6 @@ pcie-controller { /* wait 20ms for device settle after reset deassertion */ reset-delay-us = <20000>; clocks = <&gateclk 5>; - status = "disabled"; }; pcie@2,0 { @@ -164,7 +162,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; - status = "disabled"; }; pcie@3,0 { @@ -181,7 +178,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; - status = "disabled"; }; pcie@4,0 { @@ -198,7 +194,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; - status = "disabled"; }; pcie@5,0 { @@ -215,7 +210,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; - status = "disabled"; }; pcie@6,0 { @@ -232,7 +226,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; - status = "disabled"; }; pcie@7,0 { @@ -249,7 +242,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; - status = "disabled"; }; pcie@8,0 { @@ -266,7 +258,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; - status = "disabled"; }; pcie@9,0 { @@ -283,7 +274,6 @@ pcie-controller { marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; - status = "disabled"; }; pcie@10,0 { @@ -300,6 +290,5 @@ pcie-controller { marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 27>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt index 598533a57d79..c1e4c3d10a74 100644 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -1,6 +1,6 @@ * Marvell Armada 7K/8K PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: @@ -34,5 +34,4 @@ Example: interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clocks = <&cpm_syscon0 1 13>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index d08a4d51108f..7e05487544ed 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -1,12 +1,12 @@ TI Keystone PCIe interface -Keystone PCI host Controller is based on Designware PCI h/w version 3.65. -It shares common functions with PCIe Designware core driver and inherit -common properties defined in +Keystone PCI host Controller is based on the Synopsys DesignWare PCI +hardware version 3.65. It shares common functions with the PCIe DesignWare +core driver and inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt -for the details of Designware DT bindings. Additional properties are +for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. Required Properties:- @@ -52,13 +52,12 @@ pcie_intc: Interrupt controller device node for Legacy IRQ chip }; Optional properties:- - phys: phandle to Generic Keystone SerDes phy for PCI - phy-names: name of the Generic Keystine SerDes phy for PCI + phys: phandle to generic Keystone SerDes PHY for PCI + phy-names: name of the generic Keystone SerDes PHY for PCI - If boot loader already does PCI link establishment, then phys and phy-names shouldn't be present. interrupts: platform interrupt for error interrupts. -Designware DT Properties not applicable for Keystone PCI +DesignWare DT Properties not applicable for Keystone PCI 1. pcie_bus clock-names not used. Instead, a phandle to phys is used. - diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 07a75094c5a8..3d038638612b 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -6,11 +6,14 @@ AHB. There is one bridge instance per USB port connected to the internal OHCI and EHCI controllers. Required properties: -- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC; +- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC; + "renesas,pci-r8a7745" for the R8A7745 SoC; + "renesas,pci-r8a7790" for the R8A7790 SoC; "renesas,pci-r8a7791" for the R8A7791 SoC; "renesas,pci-r8a7793" for the R8A7793 SoC; "renesas,pci-r8a7794" for the R8A7794 SoC; - "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device + "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or + RZ/G1 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt index 50f9e2ca5b13..c77981c5dd18 100644 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -1,12 +1,12 @@ PCI bus bridges have standardized Device Tree bindings: PCI Bus Binding to: IEEE Std 1275-1994 -http://www.firmware.org/1275/bindings/pci/pci2_1.pdf +http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf And for the interrupt mapping part: Open Firmware Recommended Practice: Interrupt Mapping -http://www.firmware.org/1275/practice/imap/imap0_9d.pdf +http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf Additionally to the properties specified in the above standards a host bridge driver implementation may support the following properties: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 9d418b71774f..3c9d321b3d3b 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -9,6 +9,7 @@ - "qcom,pcie-apq8084" for apq8084 - "qcom,pcie-msm8996" for msm8996 or apq8096 - "qcom,pcie-ipq4019" for ipq4019 + - "qcom,pcie-ipq8074" for ipq8074 - reg: Usage: required @@ -20,7 +21,7 @@ Value type: <stringlist> Definition: Must include the following entries - "parf" Qualcomm specific registers - - "dbi" Designware PCIe registers + - "dbi" DesignWare PCIe registers - "elbi" External local bus interface registers - "config" PCIe configuration space @@ -105,6 +106,16 @@ - "bus_master" Master AXI clock - "bus_slave" Slave AXI clock +- clock-names: + Usage: required for ipq8074 + Value type: <stringlist> + Definition: Should contain the following entries + - "iface" PCIe to SysNOC BIU clock + - "axi_m" AXI Master clock + - "axi_s" AXI Slave clock + - "ahb" AHB clock + - "aux" Auxiliary clock + - resets: Usage: required Value type: <prop-encoded-array> @@ -144,6 +155,18 @@ - "ahb" AHB reset - "phy_ahb" PHY AHB reset +- reset-names: + Usage: required for ipq8074 + Value type: <stringlist> + Definition: Should contain the following entries + - "pipe" PIPE reset + - "sleep" Sleep reset + - "sticky" Core Sticky reset + - "axi_m" AXI Master reset + - "axi_s" AXI Slave reset + - "ahb" AHB Reset + - "axi_m_sticky" AXI Master Sticky reset + - power-domains: Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> @@ -180,7 +203,7 @@ - <name>-gpios: Usage: optional Value type: <prop-encoded-array> - Definition: List of phandle and gpio specifier pairs. Should contain + Definition: List of phandle and GPIO specifier pairs. Should contain - "perst-gpios" PCIe endpoint reset signal line - "wake-gpios" PCIe endpoint wake signal line diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt index 8e0a1eb0acbb..a04ab1b76211 100644 --- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt +++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt @@ -71,7 +71,7 @@ - interrupt-map: standard PCI properties to define the mapping of the PCI interface to interrupt numbers. - The PCI host bridge node migh have additional sub-nodes representing + The PCI host bridge node might have additional sub-nodes representing the onboard PCI devices/PCI slots. Each such sub-node must have the following mandatory properties: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index bd27428dda61..76ba3a61d1a3 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -14,7 +14,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; SoC-specific version corresponding to the platform first followed by the generic version. -- reg: base address and length of the pcie controller registers. +- reg: base address and length of the PCIe controller registers. - #address-cells: set to <3> - #size-cells: set to <2> - bus-range: PCI bus numbers covered @@ -25,15 +25,14 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; source for hardware related interrupts (e.g. link speed change). - #interrupt-cells: set to <1> - interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt - numbers. + to define the mapping of the PCIe interface to interrupt numbers. - clocks: from common clock binding: clock specifiers for the PCIe controller and PCIe bus clocks. - clock-names: from common clock binding: should be "pcie" and "pcie_bus". Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie: pcie@fe000000 { compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; @@ -54,5 +53,4 @@ SoC specific DT Entry: interrupt-map = <0 0 0 0 &gic 0 116 4>; clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index 1453a734c2f5..af34c65773fd 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -19,8 +19,6 @@ Required properties: - "pm" - msi-map: Maps a Requester ID to an MSI controller and associated msi-specifier data. See ./pci-msi.txt -- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. -- phy-names: MUST be "pcie-phy". - interrupts: Three interrupt entries must be specified. - interrupt-names: Must include the following names - "sys" @@ -42,11 +40,24 @@ Required properties: interrupt source. The value must be 1. - interrupt-map-mask and interrupt-map: standard PCI properties +Required properties for legacy PHY model (deprecated): +- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. +- phy-names: MUST be "pcie-phy". + +Required properties for per-lane PHY model (preferred): +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include 4 entries for all 4 lanes even if some of + them won't be used for your cases. Entries are of the form "pcie-phy-N": + where N ranges from 0 to 3. + (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt + for changing the #phy-cells of phy node to support it) + Optional Property: - aspm-no-l0s: RC won't support ASPM L0s. This property is needed if using 24MHz OSC for RC's PHY. -- ep-gpios: contain the entry for pre-reset gpio +- ep-gpios: contain the entry for pre-reset GPIO - num-lanes: number of lanes to use +- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe. - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. - vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. - vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe. @@ -95,6 +106,7 @@ pcie0: pcie@f8000000 { <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; + /* deprecated legacy PHY model */ phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; @@ -111,3 +123,13 @@ pcie0: pcie@f8000000 { #interrupt-cells = <1>; }; }; + +pcie0: pcie@f8000000 { + ... + + /* preferred per-lane PHY model */ + phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; + + ... +}; diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt index 7d3b09474657..34a11bfbfb60 100644 --- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt +++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt @@ -1,29 +1,29 @@ * Samsung Exynos 5440 PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "samsung,exynos5440-pcie" -- reg: base addresses and lengths of the pcie controller, - the phy controller, additional register for the phy controller. - (Registers for the phy controller are DEPRECATED. +- reg: base addresses and lengths of the PCIe controller, + the PHY controller, additional register for the PHY controller. + (Registers for the PHY controller are DEPRECATED. Use the PHY framework.) - reg-names : First name should be set to "elbi". - And use the "config" instead of getting the confgiruation address space + And use the "config" instead of getting the configuration address space from "ranges". - NOTE: When use the "config" property, reg-names must be set. + NOTE: When using the "config" property, reg-names must be set. - interrupts: A list of interrupt outputs for level interrupt, pulse interrupt, special interrupt. -- phys: From PHY binding. Phandle for the Generic PHY. +- phys: From PHY binding. Phandle for the generic PHY. Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt -Other common properties refer to - Documentation/devicetree/binding/pci/designware-pcie.txt +For other common properties, refer to + Documentation/devicetree/bindings/pci/designware-pcie.txt Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie@290000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; @@ -83,7 +83,7 @@ With using PHY framework: ... }; -Board specific DT Entry: +Board-specific DT Entry: pcie@290000 { reset-gpio = <&pin_ctrl 5 0>; diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt index 49ea76da7718..d5a14f5dad46 100644 --- a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt +++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt @@ -1,12 +1,12 @@ SPEAr13XX PCIe DT detail: ================================ -SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy +SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY controller. Required properties: -- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". -- phys : phandle to phy node associated with pcie controller +- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". +- phys : phandle to PHY node associated with PCIe controller - phy-names : must be "pcie-phy" - All other definitions as per generic PCI bindings diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 6a07c96227e0..7f7af3044016 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -1,6 +1,6 @@ TI PCI Controllers -PCIe Designware Controller +PCIe DesignWare Controller - compatible: Should be "ti,dra7-pcie" for RC Should be "ti,dra7-pcie-ep" for EP - phys : list of PHY specifiers (used by generic PHY framework) @@ -13,7 +13,7 @@ PCIe Designware Controller HOST MODE ========= - reg : Two register ranges as listed in the reg-names property - - reg-names : The first entry must be "ti-conf" for the TI specific registers + - reg-names : The first entry must be "ti-conf" for the TI-specific registers The second entry must be "rc-dbics" for the DesignWare PCIe registers The third entry must be "config" for the PCIe configuration space @@ -30,7 +30,7 @@ HOST MODE DEVICE MODE =========== - reg : Four register ranges as listed in the reg-names property - - reg-names : "ti-conf" for the TI specific registers + - reg-names : "ti-conf" for the TI-specific registers "ep_dbics" for the standard configuration registers as they are locally accessed within the DIF CS space "ep_dbics2" for the standard configuration registers as @@ -46,7 +46,7 @@ DEVICE MODE access. Optional Property: - - gpios : Should be added if a gpio line is required to drive PERST# line + - gpios : Should be added if a GPIO line is required to drive PERST# line NOTE: Two DT nodes may be added for each PCI controller; one for host mode and another for device mode. So in order for PCI to diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt index ebd1e7d0403e..0a702b13d2ac 100644 --- a/Documentation/devicetree/bindings/pci/versatile.txt +++ b/Documentation/devicetree/bindings/pci/versatile.txt @@ -5,7 +5,7 @@ PCI host controller found on the ARM Versatile PB board's FPGA. Required properties: - compatible: should contain "arm,versatile-pci" to identify the Versatile PCI controller. -- reg: base addresses and lengths of the pci controller. There must be 3 +- reg: base addresses and lengths of the PCI controller. There must be 3 entries: - Versatile-specific registers - Self Config space diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt index 36d881c8e6d4..85d9b95234f7 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -4,7 +4,7 @@ Required properties: - compatible: should be "apm,xgene1-msi" to identify X-Gene v1 PCIe MSI controller block. -- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node - reg: physical base address (0x79000000) and length (0x900000) for controller registers. These registers include the MSI termination address and data registers as well as the MSI interrupt status registers. @@ -13,7 +13,8 @@ Required properties: interrupt number 0x10 to 0x1f. - interrupt-names: not required -Each PCIe node needs to have property msi-parent that points to msi controller node +Each PCIe node needs to have property msi-parent that points to an MSI +controller node Examples: @@ -44,7 +45,6 @@ SoC DTSI: + PCIe controller node with msi-parent property pointing to MSI node: pcie0: pcie@1f2b0000 { - status = "disabled"; device_type = "pci"; compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt index 1070b068c7c6..6fd2decfa66c 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt @@ -8,7 +8,7 @@ Required properties: property. - reg-names: Must include the following entries: "csr": controller configuration registers. - "cfg": pcie configuration space registers. + "cfg": PCIe configuration space registers. - #address-cells: set to <3> - #size-cells: set to <2> - ranges: ranges for the outbound memory, I/O regions. @@ -21,11 +21,11 @@ Required properties: Optional properties: - status: Either "ok" or "disabled". -- dma-coherent: Present if dma operations are coherent +- dma-coherent: Present if DMA operations are coherent Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie0: pcie@1f2b0000 { status = "disabled"; @@ -51,7 +51,7 @@ SoC specific DT Entry: }; -Board specific DT Entry: +Board-specific DT Entry: &pcie0 { status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt index 3259798a1192..01bf7fdf4c19 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -15,9 +15,9 @@ Required properties: - device_type: must be "pci" - interrupts: Should contain NWL PCIe interrupt - interrupt-names: Must include the following entries: - "msi1, msi0": interrupt asserted when MSI is received + "msi1, msi0": interrupt asserted when an MSI is received "intx": interrupt asserted when a legacy interrupt is received - "misc": interrupt asserted when miscellaneous is received + "misc": interrupt asserted when miscellaneous interrupt is received - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCI interface to interrupt numbers. - ranges: ranges for the PCI memory regions (I/O space region is not @@ -26,7 +26,8 @@ Required properties: detailed explanation - msi-controller: indicates that this is MSI controller node - msi-parent: MSI parent of the root complex itself -- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts +- legacy-interrupt-controller: Interrupt controller device node for Legacy + interrupts - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: should be set to 1 - #address-cells: specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt index 5f3a65a9dd88..e1bb12711fbf 100644 --- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -61,19 +61,16 @@ Example: compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; #phy-cells = <1>; - status = "disabled"; }; phy2: phy@1f22a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f22a000 0x0 0x100>; #phy-cells = <1>; - status = "ok"; }; phy3: phy@1f23a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f23a000 0x0 0x100>; #phy-cells = <1>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt index f37b3a86341d..300830dda0bf 100644 --- a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt @@ -16,5 +16,4 @@ usb_phy: usb_phy@2620738 { #address-cells = <1>; #size-cells = <1>; reg = <0x2620738 32>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index faf18084a33a..41e09ed2ca70 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -51,14 +51,12 @@ u3phy: usb-phy@11290000 { #address-cells = <2>; #size-cells = <2>; ranges; - status = "okay"; u2port0: usb-phy@11290800 { reg = <0 0x11290800 0 0x100>; clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; u3port0: usb-phy@11290900 { @@ -66,7 +64,6 @@ u3phy: usb-phy@11290000 { clocks = <&clk26m>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; u2port1: usb-phy@11291000 { @@ -74,7 +71,6 @@ u3phy: usb-phy@11290000 { clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt index f95b6260a3b3..64afdd13d91d 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt @@ -18,7 +18,6 @@ Example: clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; }; Armada 375 USB cluster diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt index a67ef2a3874f..074a7b3b0425 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -67,14 +67,12 @@ grf: syscon@ff770000 { <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "otg-id", "otg-bvalid", "linestate"; - status = "okay"; }; u2phy_host: host-port { #phy-cells = <0>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "linestate"; - status = "okay"; }; }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt index 86f2dbe07ed4..a1697c27aecd 100644 --- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt @@ -25,7 +25,6 @@ Example: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; phy@100f8830 { @@ -35,5 +34,4 @@ Example: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt index 0f6222a672ce..b496042f1f44 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt @@ -3,7 +3,6 @@ Rockchip PCIE PHY Required properties: - compatible: rockchip,rk3399-pcie-phy - - #phy-cells: must be 0 - clocks: Must contain an entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must be "refclk" @@ -11,6 +10,12 @@ Required properties: See ../reset/reset.txt for details. - reset-names: Must be "phy" +Required properties for legacy PHY mode (deprecated): + - #phy-cells: must be 0 + +Required properties for per-lane PHY mode (preferred): + - #phy-cells: must be 1 + Example: grf: syscon@ff770000 { diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index ab80bfe31cb3..1c40ccd40ce4 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -82,7 +82,6 @@ usbphy: phy@125b0000 { reg = <0x125b0000 0x100>; clocks = <&clock 305>, <&clock 2>; clock-names = "phy", "ref"; - status = "okay"; #phy-cells = <1>; samsung,sysreg-phandle = <&sys_reg>; samsung,pmureg-phandle = <&pmu_reg>; diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index 1cca85c709d1..f9853156e311 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -33,6 +33,5 @@ Example: clock-names = "hsic_480M", "hsic_12M", "phy"; resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; reset-names = "hsic", "phy"; - status = "disabled"; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 590e60378be3..3e23fece99da 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -148,5 +148,4 @@ dbgu: serial@fffff200 { interrupts = <1 4 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 9fde25f1401a..42d74f8a1bcc 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -61,7 +61,6 @@ Examples: usdhc@0219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt index 8c5d27c5b562..6666277c3acb 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt @@ -61,7 +61,6 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as: i2c1: i2c@30a20000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>; - status = "okay"; }; iomuxc-lpsr@302c0000 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt index f2abdaee9022..e0e886b73527 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt @@ -56,5 +56,4 @@ Example: pinctrl-0 = <&state_dpaux_i2c>; pinctrl-1 = <&state_dpaux_off>; pinctrl-names = "default", "idle"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt index 09e81a95bbfd..b1159434f593 100644 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt @@ -50,7 +50,6 @@ uart2: serial@900000 { reg-io-width = <1>; current-speed = <115200>; no-loopback-test; - status = "disabled"; resets = <&reset 22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt new file mode 100644 index 000000000000..eee3dc260934 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -0,0 +1,63 @@ +Pincontrol driver for RK805 Power management IC. + +RK805 has 2 pins which can be configured as GPIO output only. + +Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + <pinctrl-binding.txt>. + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- #gpio-cells: Should be two. The first cell is the pin number and the + second is the GPIO flags. + +- gpio-controller: Marks the device node as a GPIO controller. + +- pins: List of pins. Valid values of pins properties are: gpio0, gpio1. + +First 2 properties must be added in the RK805 PMIC node, documented in +Documentation/devicetree/bindings/mfd/rk808.txt + +Optional properties: +------------------- +Following are optional properties defined as pinmux DT binding document +<pinctrl-bindings.txt>. Absence of properties will leave the configuration +on default. + function, + output-low, + output-high. + +Valid values for function properties are: gpio. + +Theres is also not customised properties for any GPIO. + +Example: +-------- +rk805: rk805@18 { + compatible = "rockchip,rk805"; + ... + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&rk805_default>; + + rk805_default: pinmux { + gpio01 { + pins = "gpio0", "gpio1"; + function = "gpio"; + output-high; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt index e219849b21ca..39170f372599 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt @@ -81,5 +81,4 @@ pmm: pin-controller@1462000 { &vga { pinctrl-names = "default"; pinctrl-0 = <&vga_pins>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index f4d127df980d..9b4f8041c36a 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -112,7 +112,7 @@ Examples Example 1: SH73A0 (SH-Mobile AG5) pin controller node - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; @@ -173,5 +173,4 @@ Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device bus-width = <8>; vmmc-supply = <®_1p8v>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 58b7921b4fed..4864e3a74de3 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -121,7 +121,6 @@ uart2: serial@20064000 { reg-shift = <2>; reg-io-width = <1>; clocks = <&mux_uart2>; - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index d907a74f8dc0..33e3d3c47552 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -180,5 +180,4 @@ pin-controller { &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt index 4f7a3bc9c407..e45affea8078 100644 --- a/Documentation/devicetree/bindings/power/power-controller.txt +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -13,6 +13,5 @@ Example: act8846: act8846@5 { compatible = "active-semi,act8846"; - status = "okay"; system-power-controller; } diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt index 83734dc3a389..b63948737d80 100644 --- a/Documentation/devicetree/bindings/power/reset/st-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt @@ -8,5 +8,4 @@ Example node: restart { compatible = "st,stih407-restart"; st,syscfg = <&syscfg_sbc_reg>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt index de78d761ce44..b86ecada4f84 100644 --- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt @@ -29,7 +29,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; charger { compatible = "active-semi,act8945a-charger"; @@ -43,6 +42,5 @@ Example: active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt index f0f4e12b076e..bab947fef025 100644 --- a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt @@ -21,5 +21,4 @@ Example: flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt index e03e85ae6572..d6e8dfd0a581 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt @@ -12,7 +12,6 @@ Example: clock-frequency = <50000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; max14656@35 { compatible = "maxim,max14656"; diff --git a/Documentation/devicetree/bindings/powerpc/ibm,vas.txt b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt new file mode 100644 index 000000000000..bf11d2faf7b8 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt @@ -0,0 +1,22 @@ +* IBM Powerpc Virtual Accelerator Switchboard (VAS) + +VAS is a hardware mechanism that allows kernel subsystems and user processes +to directly submit compression and other requests to Nest accelerators (NX) +or other coprocessors functions. + +Required properties: +- compatible : should be "ibm,vas". +- ibm,vas-id : A unique identifier for each instance of VAS in the system +- reg : Should contain 4 pairs of 64-bit fields specifying the Hypervisor + window context start and length, OS/User window context start and length, + "Paste address" start and length, "Paste window id" start bit and number + of bits) + +Example: + + vas@6019100000000 { + compatible = "ibm,vas", "ibm,power9-vas"; + reg = <0x6019100000000 0x2000000 0x6019000000000 0x100000000 0x8000000000000 0x100000000 0x20 0x10>; + name = "vas"; + ibm,vas-id = <0x1>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt new file mode 100644 index 000000000000..6ad881cbffda --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt @@ -0,0 +1,27 @@ +IBM OPAL Sensor Groups Binding +------------------------------- + +Node: /ibm,opal/sensor-groups + +Description: Contains sensor groups available in the Powernv P9 +servers. Each child node indicates a sensor group. + +- compatible : Should be "ibm,opal-sensor-group" + +Each child node contains below properties: + +- type : String to indicate the type of sensor-group + +- sensor-group-id: Abstract unique identifier provided by firmware of + type <u32> which is used for sensor-group + operations like clearing the min/max history of all + sensors belonging to the group. + +- ibm,chip-id : Chip ID + +- sensors : Phandle array of child nodes of /ibm,opal/sensor/ + belonging to this group + +- ops : Array of opal-call numbers indicating available operations on + sensor groups like clearing min/max, enabling/disabling sensor + group. diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt index 40bf9c3564a5..0de23b793657 100644 --- a/Documentation/devicetree/bindings/pps/pps-gpio.txt +++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt @@ -13,8 +13,12 @@ Optional properties: Example: pps { - compatible = "pps-gpio"; - gpios = <&gpio2 6 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; assert-falling-edge; + + compatible = "pps-gpio"; + status = "okay"; }; diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt index 7c04e22a5d6a..6b1075ee8a30 100644 --- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt +++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt @@ -16,5 +16,4 @@ Example: ptp: ptp-dte@180af650 { compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte"; reg = <0x180af650 0x10>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 5b07bebbf6f7..1ee81321c35e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -19,7 +19,6 @@ Example: compatible = "amlogic,meson-gxbb-pwm"; reg = <0x0 0x08550 0x0 0x10>; #pwm-cells = <3>; - status = "disabled"; clocks = <&xtal>, <&xtal>; clock-names = "clkin0", "clkin1"; } diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt new file mode 100644 index 000000000000..f8338d11fd2b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt @@ -0,0 +1,24 @@ +STMicroelectronics STM32 Low-Power Timer PWM + +STM32 Low-Power Timer provides single channel PWM. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required parameters: +- compatible: Must be "st,stm32-pwm-lp". + +Optional properties: +- pinctrl-names: Set to "default". +- pinctrl-0: Phandle pointing to pin configuration node for PWM. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + pwm { + compatible = "st,stm32-pwm-lp"; + pinctrl-names = "default"; + pinctrl-0 = <&lppwm1_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index f1cbeefb3087..c5171660eaf9 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -19,5 +19,4 @@ Example: reg = <0x01c20e00 0xc>; clocks = <&osc24M>; #pwm-cells = <3>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt index 1a5d7b71db89..4633697fbda1 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt @@ -26,7 +26,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am33xx */ ti,hwmods = "epwmss0"; #address-cells = <1>; #size-cells = <1>; - status = "disabled"; ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 0x48300180 0x48300180 0x80 /* EQEP */ 0x48300200 0x48300200 0x80>; /* EHRPWM */ @@ -40,7 +39,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am4372 */ ti,hwmods = "epwmss0"; #address-cells = <1>; #size-cells = <1>; - status = "disabled"; ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 0x48300180 0x48300180 0x80 /* EQEP */ 0x48300200 0x48300200 0x80>; /* EHRPWM */ diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 6067d9830d07..3ae9f1088845 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -52,7 +52,6 @@ Example: compatible = "active-semi,act8865"; reg = <0x5b>; active-semi,vsel-high; - status = "disabled"; regulators { vcc_1v8_reg: DCDC_REG1 { diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt index 5c80a7779552..ac955dea00d1 100644 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -23,7 +23,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; active-semi,vsel-high; diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt index b4e96a278445..05d5be48dae4 100644 --- a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt +++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt @@ -80,5 +80,4 @@ mac: ethernet@40010000 { clock-names = "stmmaceth"; resets = <&rgu 22>; reset-names = "stmmaceth"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt index 0a4c371a9b7a..a66692a08ace 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -45,5 +45,4 @@ Example: interrupts = <17 1>; interrupt-names = "alarm"; st,syscfg = <&pwrcfg>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt index 2a42a323fa1a..b6a869f97715 100644 --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -85,5 +85,4 @@ Example: <366 1>,<367 1>/* cq30-31 */ <376 4>,/* fatal ecc */ <381 4>;/* fatal axi */ - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt index 3ad115efed1e..6a4e0d30d8c4 100644 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): &i2c2 { - status = "okay"; st33zp24: st33zp24@13 { diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt index 158b0165e01c..604dce901b60 100644 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt @@ -18,7 +18,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4): &mcspi4 { - status = "okay"; st33zp24@0 { diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 8cb638b7e89c..3eca6de6369d 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -17,5 +17,4 @@ tpm@57 { compatible = "nuvoton,npct650", "nuvoton,npct601"; linux,sml-base = <0x7f 0xfd450000>; linux,sml-size = <0x10000>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt index 85741cd468cc..b800667da92b 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt @@ -13,7 +13,6 @@ Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4): &mcspi4 { - status = "okay"; tpm_tis@0 { diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt index 5cae2eb686f8..256cc150ca7e 100644 --- a/Documentation/devicetree/bindings/serial/arc-uart.txt +++ b/Documentation/devicetree/bindings/serial/arc-uart.txt @@ -15,7 +15,6 @@ arcuart0: serial@c0fc1000 { interrupts = <5>; clock-frequency = <80000000>; current-speed = <115200>; - status = "okay"; }; Note: Each port should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt index 51b3c9e80ad9..048c3818c826 100644 --- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -15,7 +15,6 @@ serial@b00260000 { compatible = "axis,etraxfs-uart"; reg = <0xb0026000 0x1000>; interrupts = <68>; - status = "disabled"; dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index c93a2d1c1a65..d7edf732eb7f 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -33,5 +33,4 @@ serial@70006000 { reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index d5f73b8f614f..9d098cf73b53 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -72,13 +72,10 @@ Examples: }; uarta: serial@12490000 { - status = "ok"; }; uartb: serial@16340000 { - status = "ok"; }; uartc: serial@1a240000 { - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt index b542a0ecf06e..863c2893759e 100644 --- a/Documentation/devicetree/bindings/serial/serial.txt +++ b/Documentation/devicetree/bindings/serial/serial.txt @@ -43,7 +43,6 @@ Examples: rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - status = "okay"; }; scifa4: serial@e6c80000 { @@ -54,5 +53,4 @@ Examples: clock-names = "fck"; power-domains = <&pd_a3sp>; uart-has-rtscts; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt index 362a76925bcd..f311472990a7 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -19,5 +19,4 @@ Example: reg = <0x01c2a000 0x400>; interrupts = <0 62 4>; clocks = <&apb1_gates 6>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt new file mode 100644 index 000000000000..7b7bc9cdf986 --- /dev/null +++ b/Documentation/devicetree/bindings/serio/ps2-gpio.txt @@ -0,0 +1,23 @@ +Device-Tree binding for ps/2 gpio device + +Required properties: + - compatible = "ps2-gpio" + - data-gpios: the data pin + - clk-gpios: the clock pin + - interrupts: Should trigger on the falling edge of the clock line. + +Optional properties: + - write-enable: Indicates whether write function is provided + to serio device. Possibly providing the write fn will not work, because + of the tough timing requirements. + +Example nodes: + +ps2@0 { + compatible = "ps2-gpio"; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + write-enable; +}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt index 2f5ede39bea2..fe1855f09dcc 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -78,7 +78,6 @@ Example for APQ8064: interrupts = <0 152 0x0>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; - status = "ok"; }; }; diff --git a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt index bf984d238620..953c092db72f 100644 --- a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt +++ b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt @@ -23,5 +23,4 @@ Example: compatible = "marvell,a370db-audio"; marvell,audio-controller = <&audio_controller>; marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index fdb25b492514..9d049d4bfd58 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -45,7 +45,6 @@ Example: &ssc0 { #sound-dai-cells = <0>; - status = "okay"; }; &i2c { diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt index b139e66d2a11..630bf7c0344d 100644 --- a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -47,21 +47,17 @@ Example: ssp0: ssp_port@0 { reg = <0>; - status = "okay"; }; ssp1: ssp_port@1 { reg = <1>; - status = "disabled"; }; ssp2: ssp_port@2 { reg = <2>; - status = "disabled"; }; spdif: spdif_port@3 { reg = <3>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/sound/cs43130.txt b/Documentation/devicetree/bindings/sound/cs43130.txt new file mode 100644 index 000000000000..8b1dd5aeb004 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs43130.txt @@ -0,0 +1,67 @@ +CS43130 DAC + +Required properties: + + - compatible : "cirrus,cs43130", "cirrus,cs4399", "cirrus,cs43131", + "cirrus,cs43198" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply, VL-supply, VCP-supply, VD-supply: + power supplies for the device, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + +Optional properties: + + - reset-gpios : Active low GPIO used to reset the device + + - cirrus,xtal-ibias: + When external MCLK is generated by external crystal + oscillator, CS43130 can be used to provide bias current + for external crystal. Amount of bias current sent is + set as: + 1 = 7.5uA + 2 = 12.5uA + 3 = 15uA + + - cirrus,dc-measure: + Boolean, define to enable headphone DC impedance measurement. + + - cirrus,ac-measure: + Boolean, define to enable headphone AC impedance measurement. + DC impedance must also be enabled for AC impedance measurement. + + - cirrus,dc-threshold: + Define 2 DC impedance thresholds in ohms for HP output control. + Default values are 50 and 120 Ohms. + + - cirrus,ac-freq: + Define the frequencies at which to measure HP AC impedance. + Only used if "cirrus,dc-measure" is defined. + Exactly 10 frequencies must be defined. + If this properties is undefined, by default, + following frequencies are used: + <24 43 93 200 431 928 2000 4309 9283 20000> + The above frequencies are logarithmically equally spaced. + Log base is 10. + +Example: + +cs43130: audio-codec@30 { + compatible = "cirrus,cs43130"; + reg = <0x30>; + reset-gpios = <&axi_gpio 54 0>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + VL-supply = <&dummy_vreg>; + VCP-supply = <&dummy_vreg>; + VD-supply = <&dummy_vreg>; + cirrus,xtal-ibias = <2>; + interrupt-parent = <&gpio0>; + interrupts = <55 8>; + cirrus,dc-measure; + cirrus,ac-measure; + cirrus,dc-threshold = /bits/ 16 <20 100>; + cirrus,ac-freq = /bits/ 16 <24 43 93 200 431 928 2000 4309 9283 20000>; +}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt index e0b6165c9cfc..3ffc2562fb31 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt @@ -47,5 +47,4 @@ mcbsp0: mcbsp@1d10000 { dmas = <&edma0 3 1 &edma0 2 1>; dma-names = "tx", "rx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt new file mode 100644 index 000000000000..54c8ef6498a8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -0,0 +1,16 @@ +Device-Tree bindings for Digital microphone (DMIC) codec + +This device support generic PDM digital microphone. + +Required properties: + - compatible: should be "dmic-codec". + +Optional properties: + - dmicen-gpios: GPIO specifier for dmic to control start and stop + +Example node: + + dmic_codec: dmic@0 { + compatible = "dmic-codec"; + dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 3e26a9478e57..65979b205893 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -61,5 +61,4 @@ asrc: asrc@02034000 { "txa", "txb", "txc"; fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index cd3ee5d84f03..21c401e2ccda 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -59,5 +59,4 @@ esai: esai@02024000 { fsl,fifo-depth = <128>; fsl,esai-synchronous; big-endian; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 4ca39ddc0417..0f97e54c3d43 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -59,5 +59,4 @@ spdif: spdif@02004000 { "rxtx7"; big-endian; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt index 31af7bca3099..56407c30e954 100644 --- a/Documentation/devicetree/bindings/sound/hdmi.txt +++ b/Documentation/devicetree/bindings/sound/hdmi.txt @@ -13,5 +13,4 @@ Example node: hdmi_audio: hdmi_audio@0 { compatible = "linux,hdmi-audio"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 9800a560e0c2..77a57f84bed4 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -3,7 +3,8 @@ Mediatek AFE PCM controller for mt2701 Required properties: - compatible = "mediatek,mt2701-audio"; - reg: register location and size -- interrupts: Should contain AFE interrupt +- interrupts: should contain AFE and ASYS interrupts +- interrupt-names: should be "afe" and "asys" - power-domains: should define the power domain - clock-names: should have these clock names: "infra_sys_audio_clk", @@ -59,6 +60,7 @@ Example: <0 0x112A0000 0 0x20000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, <&topckgen CLK_TOP_AUD_MUX1_SEL>, diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt index ccb401cfef9d..551ecab67efe 100644 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt @@ -31,8 +31,22 @@ Required properties - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. - Optional Properties: + - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons + detection on headset when the mbhc is powered up + by internal current source, this is a low power. + - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons + detection on headset when mbhc is powered up + from micbias. +- qcom,micbias-lvl: Voltage (mV) for Mic Bias +- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a + NO (Normally Open). If not specified, then + its assumed that hphl pin on jack is NC + (Normally Closed). +- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is + NO (Normally Open). If not specified, then + its assumed that gnd pin on jack is NC + (Normally Closed). - qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor connected. - qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor @@ -48,6 +62,8 @@ spmi_bus { reg-names = "pmic-codec-core"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 7246bb268bf9..085bec364caf 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -199,10 +199,10 @@ Ex) sound { compatible = "simple-scu-audio-card"; ... - simple-audio-card,cpu@0 { + simple-audio-card,cpu-0 { sound-dai = <&rcar_sound 0>; }; - simple-audio-card,cpu@1 { + simple-audio-card,cpu-1 { sound-dai = <&rcar_sound 1>; }; simple-audio-card,codec { @@ -441,79 +441,79 @@ rcar_sound: sound@ec500000 { "clk_a", "clk_b", "clk_c", "clk_i"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -521,52 +521,52 @@ rcar_sound: sound@ec500000 { }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; @@ -621,7 +621,6 @@ Example: simple sound card /* Single DAI */ #sound-dai-cells = <0>; - status = "okay"; rcar_sound,dai { dai0 { @@ -667,7 +666,6 @@ Example: simple sound card for Multi channel /* Single DAI */ #sound-dai-cells = <0>; - status = "okay"; rcar_sound,dai { dai0 { diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt index 921729de7346..47f164fbd1d7 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt @@ -29,11 +29,13 @@ pdm: pdm@ff040000 { dma-names = "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&pdmm0_clk - &pdmm0_fsync &pdmm0_sdi0 &pdmm0_sdi1 &pdmm0_sdi2 &pdmm0_sdi3>; - pinctrl-1 = <&pdmm0_sleep>; - status = "disabled"; + pinctrl-1 = <&pdmm0_clk_sleep + &pdmm0_sdi0_sleep + &pdmm0_sdi1_sleep + &pdmm0_sdi2_sleep + &pdmm0_sdi3_sleep>; }; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt index eac91db07178..72d3cf4c2606 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt @@ -4,7 +4,7 @@ Required properties: - compatible: "rockchip,rk3399-gru-sound" - rockchip,cpu: The phandle of the Rockchip I2S controller that's connected to the codecs -- rockchip,codec: The phandle of the MAX98357A/RT5514/DA7219 codecs +- rockchip,codec: The phandle of the audio codecs Optional properties: - dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready. diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 206aba1b34bb..b208a752576c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -7,8 +7,12 @@ Required properties: - compatible: should be one of the following: - "rockchip,rk3066-i2s": for rk3066 + - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 + - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 + - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328 + - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366 - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368 - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399 - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 4706b96d450b..0a1dc4e1815c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -41,6 +41,5 @@ spdif: spdif@0x1011e000 { dma-names = "tx"; clock-names = "hclk", "mclk"; clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; - status = "disabled"; #sound-dai-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/sound/rt274.txt b/Documentation/devicetree/bindings/sound/rt274.txt new file mode 100644 index 000000000000..e9a6178c78cf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt274.txt @@ -0,0 +1,33 @@ +RT274 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt274". + +- reg : The I2C address of the device. + +Optional properties: + +- interrupts : The CODEC's interrupt output. + + +Pins on the device (for linking into audio routes) for RT274: + + * DMIC1 Pin + * DMIC2 Pin + * MIC + * LINE1 + * LINE2 + * HPO Pin + * SPDIF + * LINE3 + +Example: + +codec: rt274@1c { + compatible = "realtek,rt274"; + reg = <0x1c>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 70eaeaed2b18..ff381718c517 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -12,6 +12,14 @@ Required properties: Optional properties: +- "realtek,dc_offset_l_manual" +- "realtek,dc_offset_r_manual" +- "realtek,dc_offset_l_manual_mic" +- "realtek,dc_offset_r_manual_mic" + Based on the different PCB layout, add the manual offset value to + compensate the DC offset for each L and R channel, and they are different + between headphone and headset. + Pins on the device (for linking into audio routes) for RT5663: * IN1P diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.txt b/Documentation/devicetree/bindings/sound/samsung,odroid.txt index c30934dd975b..625b1b18fd02 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.txt +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.txt @@ -7,9 +7,6 @@ Required properties: - model - the user-visible name of this sound complex - clocks - should contain entries matching clock names in the clock-names property - - clock-names - should contain following entries: - - "epll" - indicating the EPLL output clock - - "i2s_rclk" - indicating the RCLK (root) clock of the I2S0 controller - samsung,audio-widgets - this property specifies off-codec audio elements like headphones or speakers, for details see widgets.txt - samsung,audio-routing - a list of the connections between audio @@ -46,9 +43,6 @@ sound { "IN1", "Mic Jack", "Mic Jack", "MICBIAS"; - clocks = <&clock CLK_FOUT_EPLL>, <&i2s0 CLK_I2S_RCLK_SRC>; - clock-names = "epll", "sclk_i2s"; - cpu { sound-dai = <&i2s0 0>; }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index c7a93931fad2..166f2290233b 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -86,6 +86,9 @@ Optional CPU/CODEC subnodes properties: in dai startup() and disabled with clk_disable_unprepare() in dai shutdown(). +- system-clock-direction-out : specifies clock direction as 'out' on + initialization. It is useful for some aCPUs with + fixed clocks. Example 1 - single DAI link: diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt index 327d229a51b2..32f8dbce5241 100644 --- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -24,6 +24,7 @@ Optional subnode properties: - simple-audio-card,convert-rate : platform specified sampling rate convert - simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) - simple-audio-card,prefix : see routing +- simple-audio-card,widgets : Please refer to widgets.txt. - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources. diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 745dc62f76ea..40068ec0e9a5 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -53,7 +53,6 @@ Example: sti_uni_player1: sti-uni-player@0x8D81000 { compatible = "st,stih407-uni-player-hdmi"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_1>; @@ -66,7 +65,6 @@ Example: sti_uni_player2: sti-uni-player@0x8D82000 { compatible = "st,stih407-uni-player-pcm-out"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; @@ -78,7 +76,6 @@ Example: sti_uni_player3: sti-uni-player@0x8D85000 { compatible = "st,stih407-uni-player-spdif"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; @@ -90,7 +87,6 @@ Example: sti_uni_reader1: sti-uni-reader@0x8D84000 { compatible = "st,stih407-uni-reader-hdmi"; - status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8D84000 0x158>; @@ -125,7 +121,6 @@ Example of audio card declaration: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sti audio card"; - status = "okay"; simple-audio-card,dai-link@0 { /* DAC */ diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index ee21da865771..fc5da6080759 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -8,6 +8,7 @@ Required properties: - compatible: should be one of the following: - "allwinner,sun4i-a10-i2s" - "allwinner,sun6i-a31-i2s" + - "allwinner,sun8i-h3-i2s" - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. @@ -22,6 +23,7 @@ Required properties: Required properties for the following compatibles: - "allwinner,sun6i-a31-i2s" + - "allwinner,sun8i-h3-i2s" - resets: phandle to the reset line for this codec Example: diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index fe0a65e6d629..70ee177901d3 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -39,5 +39,4 @@ spdif: spdif@01c21000 { clock-names = "apb", "spdif"; dmas = <&dma 0 2>, <&dma 0 2>; dma-names = "rx", "tx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt index 806ea7381483..40d94f82beb3 100644 --- a/Documentation/devicetree/bindings/sound/tas5720.txt +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -17,7 +17,6 @@ Required properties: Example: tas5720: tas5720@6c { - status = "okay"; compatible = "ti,tas5720"; reg = <0x6c>; dvdd-supply = <&vdd_3v3_reg>; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index 5e2741af27be..ca75890f0d07 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -3,7 +3,9 @@ Texas Instruments - tlv320aic32x4 Codec module The tlv320aic32x4 serial control bus communicates through I2C protocols Required properties: - - compatible: Should be "ti,tlv320aic32x4" + - compatible - "string" - One of: + "ti,tlv320aic32x4" TLV320AIC3204 + "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 - reg: I2C slave address - supply-*: Required supply regulators are: "iov" - digital IO power supply @@ -18,6 +20,8 @@ Optional properties: - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt - clocks/clock-names: Clock named 'mclk' for the master clock of the codec. See clock/clock-bindings.txt for information about the detailed format. + - aic32x4-gpio-func - <array of 5 int> + - Types are defined in include/sound/tlv320aic32x4.h Example: @@ -27,4 +31,11 @@ codec: tlv320aic32x4@18 { reg = <0x18>; clocks = <&clks 201>; clock-names = "mclk"; + aic32x4-gpio-func= < + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */ + >; }; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 47a213c411ce..ba5b45c483f5 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -26,6 +26,11 @@ Optional properties: 3 - MICBIAS output is connected to AVDD, If this node is not mentioned or if the value is incorrect, then MicBias is powered down. +- ai3x-ocmv - Output Common-Mode Voltage selection: + 0 - 1.35V, + 1 - 1.5V, + 2 - 1.65V, + 3 - 1.8V - AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the device as covered in Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/Documentation/devicetree/bindings/sound/wm8524.txt b/Documentation/devicetree/bindings/sound/wm8524.txt new file mode 100644 index 000000000000..20c62002cbcd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8524.txt @@ -0,0 +1,16 @@ +WM8524 audio CODEC + +This device does not use I2C or SPI but a simple Hardware Control Interface. + +Required properties: + + - compatible : "wlf,wm8524" + + - wlf,mute-gpios: a GPIO spec for the MUTE pin. + +Example: + +codec: wm8524@0 { + compatible = "wlf,wm8524"; + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt index 292ad5083704..3927251464f0 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt @@ -27,7 +27,6 @@ Example: interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 5>, <&dma 6>; dma-names = "tx", "rx"; - status = "okay"; }; sound { diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index 989544ea6eb5..b5a5ca4502f9 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -24,5 +24,4 @@ Example: interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 4>; dma-names = "tx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 750e29aff9bc..2c1e6a43930b 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -28,7 +28,6 @@ spi1: spi@0x4000c400 { /* USART1 */ clocks = <&cmu 20>; cs-gpios = <&gpio 51 1>; // D3 energymicro,location = <1>; - status = "ok"; ks8851@0 { compatible = "ks8851"; @@ -36,6 +35,5 @@ spi1: spi@0x4000c400 { /* USART1 */ reg = <0>; interrupt-parent = <&boardfpga>; interrupts = <4>; - status = "ok"; }; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index b785976fe98a..9ba7c5a273b4 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -38,5 +38,4 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt index bdf08e6dec9b..c212491929b5 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt @@ -34,5 +34,4 @@ spi@7000c380 { reset-names = "spi"; dmas = <&apbdma 11>, <&apbdma 11>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt index 5db9144a33c8..40d80b93e327 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt @@ -34,5 +34,4 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt index 319bad4af875..585fed90376e 100644 --- a/Documentation/devicetree/bindings/spi/sh-hspi.txt +++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt @@ -24,6 +24,5 @@ Example: interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 39e5ef7c5e71..e865855726a2 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -79,5 +79,4 @@ Example: dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt index 4c3ec13f423f..5122dc7860af 100644 --- a/Documentation/devicetree/bindings/spi/spi-clps711x.txt +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt @@ -23,7 +23,6 @@ spi@80000500 { reg = <0x80000500 0x4>; interrupts = <15>; clocks = <&clks CLPS711X_CLK_SPI>; - status = "disabled"; }; syscon3: syscon@80002200 { diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index ff5893d275a2..13b1fcc8469e 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -39,7 +39,6 @@ dspi0@4002c000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dspi0_1>; big-endian; - status = "okay"; sflash: at26df081a@0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index e0318cf92d73..236dcb0faf37 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -57,5 +57,4 @@ spi: spi@1100a000 { clock-names = "parent-clk", "sel-clk", "spi-clk"; cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>; mediatek,pad-select = <1>, <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index 4f629cc7634a..df8ec31f2f07 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -29,7 +29,6 @@ Example: cell-index = <0>; reg = <0x10600 0x28>; interrupts = <23>; - status = "disabled"; }; Example with SPI direct mode support (optionally): @@ -48,7 +47,6 @@ Example with SPI direct mode support (optionally): <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */ <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */ interrupts = <23>; - status = "disabled"; }; To enable the direct mode, the board specific 'ranges' property in the diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index de827f5a301e..484bbff5337e 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -18,7 +18,6 @@ spi1: spi@01c06000 { interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index 2ec99b86b622..ab1811354cce 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -39,7 +39,6 @@ spi0: spi@01c68000 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt index fb588b3e6a9a..f99c733d75c1 100644 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt @@ -26,7 +26,6 @@ spi1: spi@fffcc000 { clock-names = "spi_clk"; cs-gpios = <&pioB 3 0>; atmel,fifo-size = <32>; - status = "okay"; mmc-slot@0 { compatible = "mmc-spi-slot"; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 8d5665468fe7..170034e6c8b0 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -59,7 +59,6 @@ sram-controller@01c00000 { emac_sram: sram-section@8000 { compatible = "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; - status = "disabled"; }; }; }; diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index 4698e0edc205..24aacf8948c5 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -20,5 +20,4 @@ Example: compatible = "marvell,armada370-thermal"; reg = <0xd0018300 0x4 0xd0018304 0x4>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 70b4c16c7ed8..9b4c7b017495 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -77,7 +77,6 @@ Example 1): interrupts = <2 4>; clocks = <&clock 383>; clock-names = "tmu_apbif"; - status = "disabled"; vtmu-supply = <&tmu_regulator_node>; #include "exynos4412-tmu-sensor-conf.dtsi" }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt index 07a9713ae6a7..fdf5caa6229b 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -36,7 +36,6 @@ Example: clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #thermal-sensor-cells = <1>; - status = "okay"; }; thermal-zones { diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index 35f406dd86b6..af284fbd4d23 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -21,6 +21,16 @@ adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) ams,iaq-core AMS iAQ-Core VOC Sensor +amstaos,tsl2571 AMS/TAOS ALS and proximity sensor +amstaos,tsl2671 AMS/TAOS ALS and proximity sensor +amstaos,tmd2671 AMS/TAOS ALS and proximity sensor +amstaos,tsl2771 AMS/TAOS ALS and proximity sensor +amstaos,tmd2771 AMS/TAOS ALS and proximity sensor +amstaos,tsl2572 AMS/TAOS ALS and proximity sensor +amstaos,tsl2672 AMS/TAOS ALS and proximity sensor +amstaos,tmd2672 AMS/TAOS ALS and proximity sensor +amstaos,tsl2772 AMS/TAOS ALS and proximity sensor +amstaos,tmd2772 AMS/TAOS ALS and proximity sensor at,24c08 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor @@ -36,7 +46,9 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat +devantech,srf02 Devantech SRF02 ultrasonic ranger in I2C mode devantech,srf08 Devantech SRF08 ultrasonic ranger +devantech,srf10 Devantech SRF10 ultrasonic ranger dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer @@ -54,6 +66,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator @@ -168,6 +181,7 @@ st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC +ti,amc6821 Temperature Monitoring and Fan Control ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt index 3bf58c20fe94..9a5b311f4434 100644 --- a/Documentation/devicetree/bindings/unittest.txt +++ b/Documentation/devicetree/bindings/unittest.txt @@ -10,7 +10,6 @@ All other properties are optional. Example: unittest { compatible = "unittest"; - status = "okay"; }; 2) OF unittest i2c adapter platform device @@ -25,7 +24,6 @@ Children nodes contain unittest i2c devices. Example: unittest-i2c-bus { compatible = "unittest-i2c-bus"; - status = "okay"; }; 3) OF unittest i2c device @@ -40,7 +38,6 @@ All other properties are optional Example: unittest-i2c-dev { compatible = "unittest-i2c-dev"; - status = "okay"; }; 4) OF unittest i2c mux device @@ -55,7 +52,6 @@ Children nodes contain unittest i2c bus nodes per channel. Example: unittest-i2c-mux { compatible = "unittest-i2c-mux"; - status = "okay"; #address-cells = <1>; #size-cells = <0>; channel-0 { @@ -65,7 +61,6 @@ Example: i2c-dev { reg = <8>; compatible = "unittest-i2c-dev"; - status = "okay"; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index d9b42da016f3..cb2bd83fa89a 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -25,5 +25,4 @@ Example: phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 20c2ff2ba07e..16920d78e1b8 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -4,9 +4,9 @@ - reg: offset and length of the usbss register sets - ti,hwmods : must be "usb_otg_hs" -The glue layer contains multiple child nodes. It is required the have +The glue layer contains multiple child nodes. It is required to have at least a control module node, USB node and a PHY node. The second USB -node and its PHY node is optional. The DMA node is also optional. +node and its PHY node are optional. The DMA node is also optional. Reset module ~~~~~~~~~~~~ diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt index 717c5f656237..9ce22551b2b3 100644 --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt @@ -42,7 +42,6 @@ Example: usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <0>; - status = "okay"; }; usb0: usb@200000 { compatible = "ti,da830-musb"; @@ -66,7 +65,6 @@ Example: "rx1", "rx2", "rx3", "rx4", "tx1", "tx2", "tx3", "tx4"; - status = "okay"; cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index 50dee3b44665..df0e02e1ee43 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -42,7 +42,6 @@ or "device". Example: st_dwc3: dwc3@8f94000 { - status = "disabled"; compatible = "st,stih407-dwc3"; reg = <0x08f94000 0x1000>, <0x110 0x4>; reg-names = "reg-glue", "syscfg-reg"; diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt index 30361b32a460..4aae5b2cef56 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -18,7 +18,6 @@ Example device node: usb@0 { #address-cells = <0x2>; #size-cells = <0x1>; - status = "okay"; compatible = "xlnx,zynqmp-dwc3"; clock-names = "bus_clk" "ref_clk"; clocks = <&clk125>, <&clk125>; diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 410d922cfdd7..9feea6c3e4d9 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -31,7 +31,6 @@ Example: clocks = <&clk_s_a1_ls 0>; phys = <&usb2_phy>; phy-names = "usb"; - status = "okay"; resets = <&powerdown STIH416_USB1_POWERDOWN>, <&softreset STIH416_USB1_SOFTRESET>; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 78ebebb66dad..c97374315049 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -40,7 +40,6 @@ Example: port@0 { reg = <0>; phys = <&usb2phy 1>; - status = "disabled"; }; }; @@ -75,7 +74,6 @@ Example: port@0 { reg = <0>; phys = <&usb2phy 1>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt index 5405d99d9aaa..ecd607dacba5 100644 --- a/Documentation/devicetree/bindings/usb/isp1301.txt +++ b/Documentation/devicetree/bindings/usb/isp1301.txt @@ -21,5 +21,4 @@ Example: interrupt-parent = <&mic>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; transceiver = <&isp1301>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt index 2d1bef16f149..f96e09f784cc 100644 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -44,7 +44,6 @@ Example: clock-names = "usb"; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; ranges; - status = "disabled"; dwc3@2690000 { compatible = "synopsys,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 838ae48eafc1..49f54767cd21 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -75,7 +75,6 @@ ssusb: usb@11271000 { #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usb_host: xhci@11270000 { compatible = "mediatek,mt8173-xhci"; @@ -86,6 +85,5 @@ ssusb: usb@11271000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index 6d8393748da2..d893ec9131c3 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -29,7 +29,6 @@ Example: clock-names = "ic", "clk48"; phys = <&usb2_phy>; phy-names = "usb"; - status = "okay"; resets = <&powerdown STIH416_USB0_POWERDOWN>, <&softreset STIH416_USB0_SOFTRESET>; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index 73cc0963e823..bc8a2fa5d2bf 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -29,7 +29,6 @@ Example device nodes: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; ss_phy: phy@100f8830 { @@ -39,7 +38,6 @@ Example device nodes: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; usb3_0: usb30@0 { @@ -51,7 +49,6 @@ Example device nodes: ranges; - status = "ok"; dwc3@10000000 { compatible = "snps,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 0536a938e3ab..50a31536e975 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -29,13 +29,11 @@ Example device nodes: #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usbdrd_dwc3_0: dwc3@fe800000 { compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "otg"; - status = "disabled"; }; }; @@ -48,12 +46,10 @@ Example device nodes: #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usbdrd_dwc3_1: dwc3@fe900000 { compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "otg"; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 1c35e7b665e1..ce02cebac26a 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -2,7 +2,7 @@ Generic USB Device Properties Usually, we only use device tree for hard wired USB device. The reference binding doc is from: -http://www.firmware.org/1275/bindings/usb/usb-1_0.ps +http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps Required properties: - compatible: usbVID,PID. The textual representation of VID, PID shall @@ -16,7 +16,6 @@ Required properties: Example: &usb1 { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 12b5808b82f2..5a79aeb620b3 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -9,6 +9,7 @@ actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH adapteva Adapteva, Inc. +adaptrum Adaptrum, Inc. adh AD Holdings Plc. adi Analog Devices, Inc. advantech Advantech Corporation @@ -88,6 +89,7 @@ dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG domintech Domintech Co., Ltd. +dongwoon Dongwoon Anatech dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB @@ -196,6 +198,7 @@ mediatek MediaTek Inc. megachips MegaChips melexis Melexis N.V. melfas MELFAS Inc. +mellanox Mellanox Technologies memsic MEMSIC Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. @@ -207,7 +210,7 @@ miramems MiraMEMS Sensing Technology Co., Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. motorola Motorola, Inc. -moxa Moxa +moxa Moxa Inc. mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. @@ -344,6 +347,7 @@ tpo TPO tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited +tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics udoo Udoo diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt index ecf42c07684d..cbaa6467ab2c 100644 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt @@ -15,5 +15,4 @@ owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; clocks = <&clks 159>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt index f7cc7c060910..4fec1e3725b4 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt @@ -31,5 +31,4 @@ Example: atmel,watchdog-type = "hardware"; atmel,dbg-halt; atmel,idle-halt; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index 86fa6de1019b..711a880b3d3b 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -48,5 +48,4 @@ Example: atmel,idle-halt; atmel,max-heartbeat-sec = <16>; atmel,min-heartbeat-sec = <0>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt index 858ed9221ac4..c1b67a78f00c 100644 --- a/Documentation/devicetree/bindings/watchdog/marvel.txt +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt @@ -41,6 +41,5 @@ Example: reg = <0x20300 0x28>, <0x20108 0x4>; interrupts = <3>; timeout-sec = <10>; - status = "okay"; clocks = <&gate_clk 7>; }; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index fb740445199f..417f91110010 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -1282,7 +1282,7 @@ hierarchy and routing of interrupts in the hardware. The interrupt tree model is fully described in the document "Open Firmware Recommended Practice: Interrupt Mapping Version 0.9". The document is available at: -<http://www.openfirmware.org/ofwg/practice/> +<http://www.devicetree.org/open-firmware/practice/> 1) interrupts property ---------------------- |