diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
252 files changed, 70 insertions, 334 deletions
diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index e926aea1147d..68301b77e854 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -108,6 +108,5 @@ Example: frame-number = <1> interrupts = <0 15 0x8>; reg = <0xf0003000 0x1000>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt index 171d02cadea4..29cdbae6c5ac 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt @@ -183,7 +183,6 @@ cpm_syscon0: system-controller@440000 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&cpm_pinctrl 0 0 32>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt index a668f0e7d001..02e690a675db 100644 --- a/Documentation/devicetree/bindings/ata/apm-xgene.txt +++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt @@ -57,7 +57,6 @@ Example: <0x0 0x1f227000 0x0 0x1000>; interrupts = <0x0 0x87 0x4>; dma-coherent; - status = "ok"; clocks = <&sataclk 0>; phys = <&phy2 0>; phy-names = "sata-phy"; @@ -72,7 +71,6 @@ Example: <0x0 0x1f237000 0x0 0x1000>; interrupts = <0x0 0x88 0x4>; dma-coherent; - status = "ok"; clocks = <&sataclk 0>; phys = <&phy3 0>; phy-names = "sata-phy"; diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt index e38d73414b0d..f1172f00188a 100644 --- a/Documentation/devicetree/bindings/ata/imx-pata.txt +++ b/Documentation/devicetree/bindings/ata/imx-pata.txt @@ -13,5 +13,4 @@ Example: reg = <0x83fe0000 0x4000>; interrupts = <70>; clocks = <&clks 161>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt index fa6cde41b460..f2ab7fd013bd 100644 --- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -227,7 +227,6 @@ See the example below, where a more complete device tree is shown: }; devbus-bootcs { - status = "okay"; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; /* NOR */ @@ -240,7 +239,6 @@ See the example below, where a more complete device tree is shown: pcie-controller { compatible = "marvell,armada-xp-pcie"; - status = "okay"; device_type = "pci"; #address-cells = <3>; @@ -258,7 +256,6 @@ See the example below, where a more complete device tree is shown: pcie@1,0 { /* Port 0, Lane 0 */ - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt index 83b0e54f727c..3e21eb822811 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt @@ -84,7 +84,6 @@ gmi@70090000 { reset-names = "gmi"; ranges = <4 0 0xd0000000 0xfffffff>; - status = "okay"; bus@4,0 { compatible = "simple-bus"; @@ -121,7 +120,6 @@ gmi@70090000 { reset-names = "gmi"; ranges = <4 0 0xd0000000 0xfffffff>; - status = "okay"; can@4,0 { reg = <4 0 0x100>; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt index 7ff13be1750b..3108d03802ee 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt @@ -33,7 +33,6 @@ Example: #size-cells = <1>; ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; - status = "disabled"; child1 { ... diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index dee3f5d9df26..e3b13ea7d2ae 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -5,9 +5,31 @@ The chosen node does not represent a real device, but serves as a place for passing data between firmware and the operating system, like boot arguments. Data in the chosen node does not represent the hardware. +The following properties are recognized: -stdout-path property --------------------- + +kaslr-seed +----------- + +This property is used when booting with CONFIG_RANDOMIZE_BASE as the +entropy used to randomize the kernel image base address location. Since +it is used directly, this value is intended only for KASLR, and should +not be used for other purposes (as it may leak information about KASLR +offsets). It is parsed as a u64 value, e.g. + +/ { + chosen { + kaslr-seed = <0xfeedbeef 0xc0def00d>; + }; +}; + +Note that if this property is set from UEFI (or a bootloader in EFI +mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by +the Linux EFI stub (which will populate the property itself, using +EFI_RNG_PROTOCOL). + +stdout-path +----------- Device trees may specify the device to be used for boot console output with a stdout-path property under /chosen, as described in the Devicetree diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt index 62e67e883e76..b3205b21c9d0 100644 --- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt +++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt @@ -102,7 +102,6 @@ uart4: serial@80010000 { reg = <0x80010000 0x4000>; clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>; interrupts = <19>; - status = "disabled"; }; Clock consumer with only one, _AHB_ sink. diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index a55d31b48d6e..faa6d8ac5834 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -41,5 +41,4 @@ Example: UART controller node that consumes the clock and reset generated interrupts = <0 90 1>; clocks = <&clkc_AO CLKID_AO_UART1>; resets = <&clkc_AO RESET_AO_UART1>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index a09d627b5508..924040769186 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -33,5 +33,4 @@ Example: UART controller node that consumes the clock generated by the clock reg = <0xc81004c0 0x14>; interrupts = <0 90 1>; clocks = <&clkc CLKID_CLK81>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 606da38c0959..207682647d33 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -39,5 +39,4 @@ Example: UART controller node that consumes the clock generated by the clock reg = <0xc81004c0 0x14>; interrupts = <0 90 1>; clocks = <&clkc CLKID_CLK81>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt index 5286e260fcae..8e5a7d868557 100644 --- a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt +++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt @@ -46,7 +46,6 @@ Device tree example: uart@3e002000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 1dc80f8811fe..fe885abc9cb4 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -465,5 +465,4 @@ Example 3: UART controller node that consumes the clock generated by the clock clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart0_bus>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt index cc9b86c35758..0035a7ecaf20 100644 --- a/Documentation/devicetree/bindings/clock/hi3660-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -38,5 +38,4 @@ Examples: clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt index 7894a64887cb..4733e58e491b 100644 --- a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt +++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt @@ -27,5 +27,4 @@ Examples: interrupts = <0 49 4>; clocks = <&clock HIX5HD2_FIXED_83M>; clock-names = "apb_pclk"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt index c3b0db437c48..806f63d628bd 100644 --- a/Documentation/devicetree/bindings/clock/imx21-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt @@ -24,5 +24,4 @@ Examples: clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, <&clks IMX21_CLK_PER1>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt index 5083c0b834b2..8385348d3bd9 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -67,5 +67,4 @@ auart0: serial@8006c000 { reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt index ba6b312ff8a5..f8135ea9ca4e 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -157,5 +157,4 @@ uart1: serial@43f90000 { interrupts = <45>; clocks = <&clks 79>, <&clks 50>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt index cc05de9ec393..4c95c048d3b2 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt @@ -24,5 +24,4 @@ Examples: clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt index e6587af62ff0..d84a37d2885f 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -90,5 +90,4 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; clocks = <&clks 45>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt index 8163d565f697..0a291090e562 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt @@ -87,5 +87,4 @@ uart1: serial@43f90000 { interrupts = <45>; clocks = <&clks 10>, <&clks 30>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index cadc4d29ada6..a24ca9e582d2 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -25,5 +25,4 @@ can1: can@53fc8000 { interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 9252912a5b0e..aa0a4d423ef5 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -27,5 +27,4 @@ uart1: serial@02020000 { interrupts = <0 26 0x04>; clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt index 63f9d8277d48..dff236f524a7 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -66,7 +66,6 @@ clock@70110000 { #clock-cells = <0>; clock-output-names = "dfllCPU_out"; vdd-cpu-supply = <&vdd_cpu>; - status = "okay"; nvidia,sample-rate = <12500>; nvidia,droop-ctrl = <0x00000f00>; diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt index 4b4a9024bd99..8f67239411fe 100644 --- a/Documentation/devicetree/bindings/clock/pxa-clock.txt +++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt @@ -12,5 +12,4 @@ Examples: pxa2xx_clks: pxa2xx_clks@41300004 { compatible = "marvell,pxa-clocks"; #clock-cells = <1>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 0cd894f987a3..707a686d8d3e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -81,5 +81,4 @@ Examples dma-names = "tx", "rx"; power-domains = <&cpg>; resets = <&cpg 310>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt index e4cdaf1cb333..7cc4c0330b53 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt @@ -44,5 +44,4 @@ Examples interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; power-domains = <&cpg_clocks>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb51a33a1fbf..bb5d942075fb 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -50,5 +50,4 @@ Examples clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt index 822505e715ae..2632d3f13004 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock interrupts = <1 23 3 4>, <1 23 4 4>; clock-names = "uart", "clk_uart_baud2"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt index 2b430960ba47..21a8c23e658f 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -46,5 +46,4 @@ Example: UART controller node that consumes the clock generated by the clock clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, <&clocks SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt index e67bb05478af..985c0f574e9a 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -52,5 +52,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud3"; clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, <&clocks SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt index fa171dc4bd3c..872ee8e0f041 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt @@ -73,5 +73,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud3"; clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>, <&clock SCLK_UART>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt index effd9401c133..15b48e20a061 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt @@ -74,5 +74,4 @@ Example: UART controller node that consumes the clock generated by the clock "clk_uart_baud1"; clocks = <&clocks UART0>, <&clocks UART0>, <&clocks SCLK_UART0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index 28b28309f535..a6c4ef343b44 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -12,7 +12,11 @@ generators can be found in [1]. ==I2C device node== Required properties: -- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}". +- compatible: shall be one of the following: + "silabs,si5351a" - Si5351a, QFN20 package + "silabs,si5351a-msop" - Si5351a, MSOP10 package + "silabs,si5351b" - Si5351b, QFN20 package + "silabs,si5351c" - Si5351c, QFN20 package - reg: i2c device address, shall be 0x60 or 0x61. - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt index 1e884c40ab50..4e59dc6b1778 100644 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt @@ -14,10 +14,9 @@ Required properties: - compatible: Must be "ti,k2g-sci-clk" - #clock-cells: Shall be 2. In clock consumers, this cell represents the device ID and clock ID - exposed by the PM firmware. The assignments can be found in the header - files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and - <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> - is the SoC involved, for example 'k2g'. + exposed by the PM firmware. The list of valid values for the device IDs + and clocks IDs for 66AK2G SoC are documented at + http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data Examples: -------- diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt index 585e8c191f50..10f7047755f3 100644 --- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -81,13 +81,11 @@ atl: atl@4843c000 { <&atl_clkin2_ck>, <&atl_clkin3_ck>; clocks = <&atl_gfclk_mux>; clock-names = "fck"; - status = "disabled"; }; #include <dt-bindings/clk/ti-dra7-atl.h> &atl { - status = "okay"; atl2 { bws = <DRA7_ATL_WS_MCASP2_FSX>; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt index 750442b65505..e85ecb510d56 100644 --- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -31,5 +31,4 @@ uart0: serial@0x09405000 { reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&lsp1clk ZX296702_UART0_PCLK>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt index 4ad703808407..3a46bf0b2540 100644 --- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt @@ -34,5 +34,4 @@ usbphy0:usb-phy0 { #phy-cells = <0>; clocks = <&topclk USB20_PHY_CLK>; clock-names = "phyclk"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 6949e50f1f16..76a0b4e80e83 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -13,5 +13,4 @@ dcp@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index 941bb6a6fb13..fbc07d12322f 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -23,5 +23,4 @@ Example: interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt index c6c6a4a045bd..28d3f2496b89 100644 --- a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt +++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt @@ -41,5 +41,4 @@ Examples: clock-names = "cesa0", "cesa1"; marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; marvell,crypto-sram-size = <0x600>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt index c0c35f00335b..d9b92e2f3138 100644 --- a/Documentation/devicetree/bindings/crypto/mv_cesa.txt +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -29,5 +29,4 @@ Examples: interrupts = <22>; marvell,crypto-srams = <&crypto_sram>; marvell,crypto-sram-size = <0x600>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt index 096df34b11c1..5e2ba385b8c9 100644 --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt @@ -25,5 +25,4 @@ Examples: clock-names = "aclk", "hclk", "sclk", "apb_pclk"; resets = <&cru SRST_CRYPTO>; reset-names = "crypto-rst"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt index f2233138eba9..001dd63979a9 100644 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt @@ -15,5 +15,4 @@ Example: rockchip,pmu = <&pmugrf>; clocks = <&cru PCLK_DDR_MON>; clock-names = "pclk_ddr_mon"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index 7a9e8603c150..d6d2833482c9 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -205,5 +205,4 @@ Example: rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>; rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>; rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index ecb8da063d07..1a21202778ee 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -34,7 +34,6 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; display = <&display0>; - status = "okay"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index ec94468b35be..82f2acb3d374 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -23,7 +23,6 @@ Example: interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; - status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt index 7baa6582517e..aacc8b92968c 100644 --- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt @@ -33,7 +33,6 @@ stdp2690-ge-b850v3-fw required properties: Example: &mux2_i2c2 { - status = "okay"; clock-frequency = <100000>; stdp4028@73 { diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index 81b68580e199..cb7ffc58c564 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -43,7 +43,6 @@ Example: clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; clock-names = "iahb", "isfr"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt index 6fa4ab668db5..475008747801 100644 --- a/Documentation/devicetree/bindings/display/fsl,tcon.txt +++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt @@ -14,5 +14,4 @@ timing-controller@4003d000 { reg = <0x4003d000 0x1000>; clocks = <&clks VF610_CLK_TCON0>; clock-names = "ipg"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index fa01db7eb66c..f79854783c2c 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -116,7 +116,7 @@ Parallel display support Required properties: - compatible: Should be "fsl,imx-parallel-display" Optional properties: -- interface_pix_fmt: How this display is connected to the +- interface-pix-fmt: How this display is connected to the display interface. Currently supported types: "rgb24", "rgb565", "bgr666" and "lvds666". - edid: verbatim EDID data block describing attached display. diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt index 309c47f25b87..f79641bd5f18 100644 --- a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt +++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt @@ -23,7 +23,6 @@ Example: reg = <0x44000000 0x10000>; interrupts = <17>; clocks = <&clks CLK_LCD>; - status = "okay"; port { lcdc_out: endpoint { diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt index 5c70a8380e58..d0f55161579a 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -18,6 +18,5 @@ Example: power-supply = <...>; backlight = <&backlight>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt index 47665a12786f..43561584c13a 100644 --- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -59,7 +59,6 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&edp_hpd>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index fad8b7619647..adc94fc3c9f8 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -46,7 +46,6 @@ hdmi: hdmi@ff980000 { interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; - status = "disabled"; ports { hdmi_in: port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 543b07435f4f..6bb59ab39f2f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -36,7 +36,6 @@ Example: resets = <&cru SRST_MIPIDSI0>; reset-names = "apb"; rockchip,grf = <&grf>; - status = "okay"; ports { #address-cells = <1>; @@ -65,6 +64,5 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; backlight = <&backlight>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt index 8096a29f9776..cec21714f0e0 100644 --- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt @@ -25,7 +25,6 @@ hdmi: hdmi@20034000 { clock-names = "pclk"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; - status = "disabled"; hdmi_in: port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt index c46ba641a1df..a9168ae6946c 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt @@ -28,6 +28,5 @@ chosen { allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 2ee6ff0ef98e..92441086caba 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -278,7 +278,6 @@ hdmi: hdmi@01c16000 { <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_DEDICATED 24>; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt index 191d7bd8a6fe..97e213e07660 100644 --- a/Documentation/devicetree/bindings/dma/fsl-edma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -72,5 +72,4 @@ sai2: sai@40031000 { dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt index c075f5988135..0ffb4d8766a8 100644 --- a/Documentation/devicetree/bindings/dma/mv-xor.txt +++ b/Documentation/devicetree/bindings/dma/mv-xor.txt @@ -30,7 +30,6 @@ xor@d0060900 { reg = <0xd0060900 0x100 0xd0060b00 0x100>; clocks = <&coreclk 0>; - status = "okay"; xor00 { interrupts = <51>; diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt index 9bcab9115982..9d3b2f917b7b 100644 --- a/Documentation/devicetree/bindings/dma/qcom_adm.txt +++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt @@ -48,7 +48,6 @@ Each dmas request consists of 3 cells: Example: spi4: spi@1a280000 { - status = "ok"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index 4775c66f4508..a122723907ac 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -63,7 +63,6 @@ Example: compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; interrupts = <0 35 0x4>; - status = "disabled"; dmas = <&dmahost 12 0 1>, <&dmahost 13 0 1 0>; dma-names = "rx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt index 495d853c569b..52cfec9e77ad 100644 --- a/Documentation/devicetree/bindings/dma/st_fdma.txt +++ b/Documentation/devicetree/bindings/dma/st_fdma.txt @@ -69,7 +69,6 @@ Example: sti_uni_player2: sti-uni-player@2 { compatible = "st,sti-uni-player"; - status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index 95800ab37bb0..aa7dbd565ad0 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -135,5 +135,4 @@ Example: <&dma 13 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "rx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index f1634a27a830..3b484380c56a 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -40,7 +40,6 @@ Example: clock-names = "ahb", "mod"; dmas = <&dma 1 29>, <&dma 1 28>; dma-names = "rx", "tx"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index aead5869a28d..b849a1ed389d 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -62,7 +62,6 @@ uart1: serial@4806a000 { interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; - status = "disabled"; /* Requesting crossbar input 49 and 50 */ dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 18090e7226b4..33d9e386dc45 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -102,7 +102,6 @@ mcasp0: mcasp@48038000 { reg-names = "mpu", "dat"; interrupts = <80>, <81>; interrupt-names = "tx", "rx"; - status = "disabled"; /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */ dmas = <&edma 8 2>, <&edma 9 2>; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt index 9766f7472f51..cfa4ed42b62f 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt @@ -31,7 +31,6 @@ Example for full FPGA configuration: cell-index = <1>; interrupts = <92>; clocks = <&coreclk 0>; - status = "okay"; fpga_mgr_spi: fpga-mgr@0 { compatible = "xlnx,fpga-slave-serial"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 4b6cc632ca5c..69d46162d0f5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -23,7 +23,6 @@ gpio0: gpio@1100 { #gpio-cells = <2>; reg = <0x1100 0x080>; interrupts = <78 0x8>; - status = "okay"; }; Example of gpio-controller node for a ls2080a SoC: diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt index 96c37eb15075..dd04d96e6ff1 100644 --- a/Documentation/devicetree/bindings/gpio/spear_spics.txt +++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt @@ -42,7 +42,6 @@ spics: spics@e0700000{ spi0: spi@e0100000 { - status = "okay"; num-cs = <3>; cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index 2b6243e730f6..b4ebd56d03f3 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -10,6 +10,7 @@ Required properties: * And, optionally, one of the vendor specific compatible: + allwinner,sun4i-a10-mali + allwinner,sun7i-a20-mali + + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + stericsson,db8500-mali @@ -58,6 +59,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - allwinner,sun50i-h5-mali + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index b7e4c7444510..f32bbba4d3bc 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -51,7 +51,6 @@ Example for GK20A: resets = <&tegra_car 184>; reset-names = "gpu"; iommus = <&mc TEGRA_SWGROUP_GPU>; - status = "disabled"; }; Example for GM20B: @@ -70,7 +69,6 @@ Example for GM20B: resets = <&tegra_car 184>; reset-names = "gpu"; iommus = <&mc TEGRA_SWGROUP_GPU>; - status = "disabled"; }; Example for GP10B: @@ -89,5 +87,4 @@ Example for GP10B: reset-names = "gpu"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; iommus = <&smmu TEGRA186_SID_GPU>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt index c4f358dafdaa..1e7959332dbc 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt @@ -24,5 +24,4 @@ Example: interrupts = <0 89 0>; clocks = <&clock 177>, <&clock 277>; clock-names = "sclk_fimg2d", "fimg2d"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index f26625e42693..b8eca3c7810d 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -92,6 +92,5 @@ ssi-controller@48058000 { interrupts = <69>, <70>; - status = "disabled"; /* second port is not used on N900 */ } } diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt index 7ce23ac61308..81b5d55086fa 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -102,7 +102,6 @@ And for clarification, here are the snipplets for the i2c-parents: #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - status = "disabled"; gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */ &gpio5 5 GPIO_ACTIVE_HIGH /* scl */ >; diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt index 50b25c3da186..3b30e54ae3c7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt @@ -22,7 +22,6 @@ Example: interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; clock-frequency = <100000>; - status = "ok"; energymicro,location = <3>; eeprom@50 { diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index 656716b72cc4..f64064f8bdc2 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -71,5 +71,4 @@ Example: reset-names = "i2c"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt index caaaed765ce4..7b1b1e4086d4 100644 --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt @@ -37,5 +37,4 @@ For example: clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; clock-names = "tsc_clk"; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt index 0bcae5140bc5..9ada5abd45fa 100644 --- a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt @@ -17,5 +17,4 @@ adc0: adc@400e3000 { clocks = <&ccu1 CLK_APB3_ADC0>; vref-supply = <®_vdda>; resets = <&rgu 40>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt index 7d6647d4af5e..42db783c4e75 100644 --- a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt +++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt @@ -16,5 +16,4 @@ dac: dac@400e1000 { clocks = <&ccu1 CLK_APB3_DAC>; vref-supply = <®_vdda>; resets = <&rgu 42>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt index b77f50bd6403..262deab73588 100644 --- a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt @@ -72,7 +72,6 @@ Example: /* Required Board specific properties */ keypad,num-rows = <5>; keypad,num-columns = <5>; - status = "okay"; linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */ MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */ diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index ee09c8f4474a..4c5312eaaa85 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -43,7 +43,7 @@ haptics: haptics@5a { mode = <DRV260X_LRA_MODE>; library-sel = <DRV260X_LIB_LRA>; vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; + vib-overdrive-mv = <3200>; } For more product information please see the link below: diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt index 9d9e930f3251..df531b5b6a0d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt @@ -32,5 +32,4 @@ Example: pinctrl-1 = <&pinctrl_touchctrl_default>; pinctrl-2 = <&pinctrl_touchctrl_gpios>; vf50-ts-min-pressure = <200>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index d4927c202aef..e67e58b61706 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -35,5 +35,4 @@ Example: measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; touchscreen-average-samples = <32>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt index 11f5b5d51af8..bc03ec096269 100644 --- a/Documentation/devicetree/bindings/media/pxa-camera.txt +++ b/Documentation/devicetree/bindings/media/pxa-camera.txt @@ -24,7 +24,6 @@ Example: clock-frequency = <50000000>; clock-output-names = "qci_mclk"; - status = "okay"; port { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt index 1b1a10ba48ce..6f3756da900f 100644 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt @@ -33,5 +33,4 @@ hdmicec: cec@100B0000 { hdmi-phandle = <&hdmi>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 922d6f8e74be..e4e15d8d7521 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -166,7 +166,6 @@ Example: clock-output-names = "cam_a_clkout", "cam_b_clkout"; pinctrl-names = "default"; pinctrl-0 = <&cam_port_a_clk_active>; - status = "okay"; #address-cells = <1>; #size-cells = <1>; @@ -189,7 +188,6 @@ Example: compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; interrupts = <0 85 0>; - status = "okay"; }; csis_0: csis@11880000 { diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index cc51b1fd6e0c..6af3fc210ecc 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -52,7 +52,6 @@ Example: c8sectpfe@08a20000 { compatible = "st,stih407-c8sectpfe"; - status = "okay"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt index df7182a63e59..e47c7ccc57f1 100644 --- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt @@ -59,7 +59,6 @@ I2C-connected TVP5147 decoder: tvp5147@5d { compatible = "ti,tvp5147"; reg = <0x5d>; - status = "okay"; port { composite_in: endpoint { diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt index 1ee3bc09f319..8b9388cc1ccc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt @@ -130,7 +130,6 @@ The reg property implicitly specifies the chip select as this: Example: devbus-bootcs@d0010400 { - status = "okay"; ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */ #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt index 462819ac3da8..e6f168db6c72 100644 --- a/Documentation/devicetree/bindings/mfd/act8945a.txt +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -12,7 +12,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; active-semi,vsel-high; @@ -79,6 +78,5 @@ Example: active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt index eec40be7f79a..3f643ef121ff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -25,7 +25,6 @@ Example: clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt index 57fa74e65664..07c69c0c6624 100644 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -37,7 +37,6 @@ Sub-nodes: Examples: i2c@63fc8000 { /* I2C1 */ - status = "okay"; pmic: dialog@48 { compatible = "dlg,da9053-aa"; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 8aba48821a85..39ba4146769d 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ - status = "okay"; pmic: mc13892@0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt index 555fb117d4fa..755cbef0647d 100644 --- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt @@ -26,7 +26,6 @@ Example for i.MX23 SoC: compatible = "fsl,imx23-lradc"; reg = <0x80050000 0x2000>; interrupts = <36 37 38 39 40 41 42 43 44>; - status = "okay"; fsl,lradc-touchscreen-wires = <4>; fsl,ave-ctrl = <4>; fsl,ave-delay = <2>; @@ -39,7 +38,6 @@ Example for i.MX28 SoC: compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; - status = "okay"; fsl,lradc-touchscreen-wires = <5>; fsl,ave-ctrl = <4>; fsl,ave-delay = <2>; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt index df664018c148..d759da606f75 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt @@ -57,7 +57,6 @@ audio-subsystem { clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; - status = "disabled"; }; serial_3: serial@11460000 { @@ -69,6 +68,5 @@ audio-subsystem { clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart_aud_bus>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index f8629bb73945..f9fb412642fe 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -47,5 +47,4 @@ ssc0: ssc@f0010000 { dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 49df630bd44f..60481bfc3d31 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -74,5 +74,4 @@ Example: phys = <&emmc_phy>; phy-names = "phy_arasan"; #clock-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt index e5a0140b2381..516fb0143d4c 100644 --- a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt @@ -24,7 +24,6 @@ mmc0: mmc@1c40000 { compatible = "ti,da830-mmc", reg = <0x40000 0x1000>; interrupts = <16>; - status = "okay"; bus-width = <4>; max-frequency = <50000000>; dmas = <&edma 16 diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt index db442355cd24..184ccffe2739 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt @@ -20,5 +20,4 @@ sdhci1: sdhci@10014000 { dma-names = "rx-tx"; bus-width = <4>; cd-gpios = <&gpio3 29>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt index a70fcd65b9ea..8d2d71758907 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-card.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt @@ -21,7 +21,6 @@ Example: vmmc-supply = <®_vcc3v3>; bus-width = <8>; non-removable; - status = "okay"; mmccard: mmccard@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index c7f4a0ec48ed..b32ade645ad9 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -153,7 +153,6 @@ mmc3: mmc@01c12000 { bus-width = <4>; non-removable; mmc-pwrseq = <&sdhci0_pwrseq> - status = "okay"; brcmf: bcrmf@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt index 84f0ebd67a13..10f0818a34c5 100644 --- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt +++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt @@ -13,5 +13,4 @@ Example: reg = <0xd00d4000 0x200>; interrupts = <54>; clocks = <&gateclk 17>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 230fd696eb92..e35645598315 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -63,7 +63,6 @@ Example: mmc0: sdhci@fe81e000 { compatible = "st,sdhci"; - status = "disabled"; reg = <0xfe81e000 0x1000>; interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; interrupt-names = "mmcirq"; @@ -77,7 +76,6 @@ mmc0: sdhci@fe81e000 { mmc1: sdhci@09080000 { compatible = "st,sdhci-stih407", "st,sdhci"; - status = "disabled"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; @@ -94,7 +92,6 @@ mmc1: sdhci@09080000 { mmc0: sdhci@09060000 { compatible = "st,sdhci-stih407", "st,sdhci"; - status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt index 906819a90c2b..0f59bd5361f5 100644 --- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -28,5 +28,4 @@ Example: max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt index 489807005eda..b93c1e2f25dd 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt @@ -24,7 +24,6 @@ spi@f0020000 { #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; - status = "okay"; m25p80@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 5ded66ad7aef..840f9405dcf0 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -37,7 +37,6 @@ nor_flash: spi@1100d000 { clock-names = "spi", "sf"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; flash@0 { compatible = "jedec,spi-nor"; diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt index c2489391c437..54cef9ef3083 100644 --- a/Documentation/devicetree/bindings/mtd/st-fsm.txt +++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt @@ -21,6 +21,5 @@ Example: st,syscfg = <&syscfg_rear>; st,boot-device-reg = <0x958>; st,boot-device-spi = <0x1a>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index f322f56aef74..a37c67bcb43b 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -41,7 +41,6 @@ nfc: nand@01c03000 { #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; nand@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ad16c1f481f7..0bfad656a9ff 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -27,5 +27,4 @@ amac0: ethernet@18022000 { <0x18110000 0x1000>; reg-names = "amac_base", "idm_base"; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index 01fa2d4188d4..9c5e663fa1af 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -29,7 +29,6 @@ Example: Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: &usb_host1_ehci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 9e331777c203..78138333ff7a 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -56,7 +56,6 @@ m_can1: can@020e8000 { <&clks IMX6SX_CLK_CANFD>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; - status = "disabled"; }; Board dts: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index 0ab8b39d0b30..fd23904ac68e 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; id = <1>; - status = "okay"; ksz9477: ksz9477@0 { compatible = "microchip,ksz9477"; @@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: spi-cpha; spi-cpol; - status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 04f2965a4467..4448d063ddf6 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -27,7 +27,6 @@ Example: I2C managed mode: master: masterdevice@X { - status = "okay"; fixed-link { /* RMII fixed link to LAN9303 */ speed = <100>; @@ -38,7 +37,6 @@ I2C managed mode: switch: switch@a { compatible = "smsc,lan9303-i2c"; reg = <0xa>; - status = "okay"; reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; reset-duration = <200>; @@ -67,7 +65,6 @@ I2C managed mode: MDIO managed mode: master: masterdevice@X { - status = "okay"; phy-handle = <&switch>; mdio { diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt index c1ce1680246f..72e7aaf7242e 100644 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ b/Documentation/devicetree/bindings/net/ftgmac100.txt @@ -30,6 +30,5 @@ Example: compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; - status = "okay"; use-ncsi; }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index ae4234ca4ee4..bedcfd5a52cd 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -41,7 +41,6 @@ ethernet@70000 { interrupts = <8>; clocks = <&gate_clk 4>; tx-csum-limit = <9800> - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; buffer-manager = <&bm>; diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 9be1059ff03f..3d27c68613a6 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in below example). &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; @@ -70,7 +69,6 @@ below example). Example for USB device: &usb_host1_ohci { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt index c1b1d7c3bde1..07b31050dbe5 100644 --- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt +++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt @@ -31,7 +31,6 @@ bm: bm@c8000 { reg = <0xc8000 0xac>; clocks = <&gateclk 13>; internal-mem = <&bm_bppi>; - status = "okay"; pool2,capacity = <4096>; pool1,pkt-size = <512>; }; @@ -45,5 +44,4 @@ bm_bppi: bm-bppi { #address-cells = <1>; #size-cells = <1>; clocks = <&gateclk 13>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index c78f3187dfea..7e2dad08a12e 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -57,12 +57,10 @@ ethernet@f0000 { <0xc5000 0x100>; clocks = <&gateclk 3>, <&gateclk 19>; clock-names = "pp_clk", "gop_clk"; - status = "okay"; eth0: eth0@c4000 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; - status = "okay"; phy = <&phy0>; phy-mode = "gmii"; }; @@ -70,7 +68,6 @@ ethernet@f0000 { eth1: eth1@c5000 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; - status = "okay"; phy = <&phy3>; phy-mode = "gmii"; }; diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt index 0703ad3f3c1e..354dd9896bb5 100644 --- a/Documentation/devicetree/bindings/net/meson-dwmac.txt +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt @@ -66,5 +66,4 @@ Example for GXBB: <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index c35b5b428a7f..42a248301615 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -69,7 +69,6 @@ Examples: }; }; ethernet@70000 { - status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt index 1dc3bc75539d..44dff53d4dda 100644 --- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq): compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>; - status = "okay"; enc28j60: ethernet@0 { compatible = "microchip,enc28j60"; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 76df9173825a..c9b35251bb20 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -25,7 +25,6 @@ Optional I2C-based chip specific properties: Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { - status = "okay"; nfcmrvluart: nfcmrvluart@5 { compatible = "marvell,nfc-uart"; @@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): &i2c1 { - status = "okay"; clock-frequency = <400000>; nfcmrvli2c0: i2c@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index 5b6cd9b3f628..92486733df71 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): &i2c2 { - status = "okay"; npc100: npc100@29 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt index 1aea822d4530..122460e42e3c 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt @@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2): &i2c2 { - status = "okay"; pn532: pn532@24 { diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index dab69f36167c..538a86f7b2b0 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): &i2c2 { - status = "okay"; pn544: pn544@28 { diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt index fb1e75facf1b..ed5b3eaadb39 100644 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -12,7 +12,6 @@ Required properties: Example: &hsi2c_4 { - status = "okay"; s3fwrn5@27 { compatible = "samsung,s3fwrn5-i2c"; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index 263732e8879f..b46d473be425 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): &i2c2 { - status = "okay"; st21nfcb: st21nfcb@8 { diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt index 711ca85a363d..54ce8e7ac681 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): &mcspi4 { - status = "okay"; st21nfcb: st21nfcb@0 { diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt index 7bb2e213d6f9..5ee9440fa9ad 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): &i2c2 { - status = "okay"; st21nfca: st21nfca@1 { diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt index ea3178bc9ddd..08a202e00d47 100644 --- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt +++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt @@ -35,12 +35,10 @@ spi@9840000 { #address-cells = <1>; #size-cells = <0>; cs-gpios = <&pio0 4>; - status = "okay"; st95hf@0{ reg = <0>; compatible = "st,st95hf"; - status = "okay"; spi-max-frequency = <1000000>; enable-gpio = <&pio4 0>; interrupt-parent = <&pio0>; diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 60c833d62181..5ca9362ef127 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -23,7 +23,6 @@ Optional SoC Specific Properties: Example (for ARM-based BeagleBone with TRF7970A on SPI1): &spi1 { - status = "okay"; nfc@0 { compatible = "ti,trf7970a"; @@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): irq-status-read-quirk; en2-rf-quirk; clock-frequency = <27120000>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt index df0534e2eda1..d7117a22fd87 100644 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt @@ -35,5 +35,4 @@ etha: ethernet@40400000 { /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index d3c24d5ffa9a..77d0b2a61ffa 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -2,11 +2,7 @@ PHY nodes Required properties: - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : interrupt specifier for the sole interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer @@ -61,7 +57,7 @@ Example: ethernet-phy@0 { compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <40000>; - interrupts = <35 1>; + interrupt-parent = <&PIC>; + interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 6d9efb2eb9a5..3987846b3fd3 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -41,7 +41,6 @@ ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; - status = "okay"; qca7000: ethernet@0 { compatible = "qca,qca7000"; @@ -78,7 +77,6 @@ auart0: serial@8006a000 { reg = <0x8006a000 0x2000>; pinctrl-names = "default"; pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; qca7000: ethernet { compatible = "qca,qca7000"; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index c1325387632c..6af8eed1adeb 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -71,5 +71,4 @@ gmac: ethernet@ff290000 { tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt index 974edd5c85cc..8b7c719b0bb9 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board. pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethernetphy0: ethernet-phy@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 2e68a3cd8513..b30d04b54ee9 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 { gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; - status = "disabled"; reg = <0xff700000 0x2000>; interrupts = <0 115 4>; interrupt-names = "macirq"; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index d05c1e1fd9b6..062c5174add3 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -34,7 +34,6 @@ Example: ethernet0: dwmac@9630000 { device_type = "network"; - status = "disabled"; compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; reg = <0x9630000 0x8000>; reg-names = "stmmaceth"; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index c35afb7e956a..489dbcb66c5a 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -18,7 +18,6 @@ Example: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - status = "disabled"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; interrupts = <0 61 0>, <0 62 0>; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 590f622188de..b2bd4704f859 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -29,7 +29,6 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; - status = "okay"; brcmf: wifi@1 { reg = <1>; diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt index 19331bb4ff6e..6830c4786f8a 100644 --- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt +++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt @@ -21,7 +21,6 @@ Example: mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; - status = "okay"; esp8089: sdio_wifi@1 { compatible = "esp,esp8089"; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 0854451ff91d..59de8646862d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured so that firmware can wakeup host using this device side pin. &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt index 7b2cbb14113e..f42f6b0f1bc7 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added. Example: &mmc3 { - status = "okay"; vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index 74cf52908a6c..0668c45a156d 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -3,7 +3,10 @@ This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs. Required properties: -- compatible: should be "mediatek,mt8173-efuse" or "mediatek,efuse" +- compatible: should be + "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622 + "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623 + "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt index daebce9e6b07..372c72fd64dc 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt @@ -21,5 +21,4 @@ Example for i.MX28: #size-cells = <1>; reg = <0x8002c000 0x2000>; clocks = <&clks 25>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index e36d261b9ba6..9d733af26be7 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -464,7 +464,6 @@ Example 5: opp-supported-hw opp_table { compatible = "operating-points-v2"; - status = "okay"; opp-shared; opp-600000000 { diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt index bbcd9f4c501f..310ef7145c47 100644 --- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt +++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt @@ -33,7 +33,6 @@ Example: pcie0: pcie@d0070000 { compatible = "marvell,armada-3700-pcie"; device_type = "pci"; - status = "disabled"; reg = <0 0xd0070000 0 0x20000>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index a339dbb15493..7a579c816951 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -40,7 +40,6 @@ Hip05 Example (note that Hip06 is the same except compatible): 0x0 0 0 2 &mbigen_pcie 2 11 0x0 0 0 3 &mbigen_pcie 3 12 0x0 0 0 4 &mbigen_pcie 4 13>; - status = "ok"; }; HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description. @@ -83,5 +82,4 @@ Example: 0x0 0 0 2 &mbigen_pcie0 650 4 0x0 0 0 3 &mbigen_pcie0 650 4 0x0 0 0 4 &mbigen_pcie0 650 4>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 2de6f65ecfb1..9c7fce69570b 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -85,7 +85,6 @@ Example: pcie-controller { compatible = "marvell,armada-xp-pcie"; - status = "disabled"; device_type = "pci"; #address-cells = <3>; @@ -147,7 +146,6 @@ pcie-controller { /* wait 20ms for device settle after reset deassertion */ reset-delay-us = <20000>; clocks = <&gateclk 5>; - status = "disabled"; }; pcie@2,0 { @@ -164,7 +162,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; - status = "disabled"; }; pcie@3,0 { @@ -181,7 +178,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; - status = "disabled"; }; pcie@4,0 { @@ -198,7 +194,6 @@ pcie-controller { marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; - status = "disabled"; }; pcie@5,0 { @@ -215,7 +210,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; - status = "disabled"; }; pcie@6,0 { @@ -232,7 +226,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; - status = "disabled"; }; pcie@7,0 { @@ -249,7 +242,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; - status = "disabled"; }; pcie@8,0 { @@ -266,7 +258,6 @@ pcie-controller { marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; - status = "disabled"; }; pcie@9,0 { @@ -283,7 +274,6 @@ pcie-controller { marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; - status = "disabled"; }; pcie@10,0 { @@ -300,6 +290,5 @@ pcie-controller { marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 27>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt index 598533a57d79..6b115fd10fec 100644 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -34,5 +34,4 @@ Example: interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clocks = <&cpm_syscon0 1 13>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt index 50f9e2ca5b13..c77981c5dd18 100644 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -1,12 +1,12 @@ PCI bus bridges have standardized Device Tree bindings: PCI Bus Binding to: IEEE Std 1275-1994 -http://www.firmware.org/1275/bindings/pci/pci2_1.pdf +http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf And for the interrupt mapping part: Open Firmware Recommended Practice: Interrupt Mapping -http://www.firmware.org/1275/practice/imap/imap0_9d.pdf +http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf Additionally to the properties specified in the above standards a host bridge driver implementation may support the following properties: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index bd27428dda61..a7e3dd43b2a8 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -54,5 +54,4 @@ SoC specific DT Entry: interrupt-map = <0 0 0 0 &gic 0 116 4>; clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt index 36d881c8e6d4..54bac7f8860c 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -44,7 +44,6 @@ SoC DTSI: + PCIe controller node with msi-parent property pointing to MSI node: pcie0: pcie@1f2b0000 { - status = "disabled"; device_type = "pci"; compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt index 5f3a65a9dd88..e1bb12711fbf 100644 --- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -61,19 +61,16 @@ Example: compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; #phy-cells = <1>; - status = "disabled"; }; phy2: phy@1f22a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f22a000 0x0 0x100>; #phy-cells = <1>; - status = "ok"; }; phy3: phy@1f23a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f23a000 0x0 0x100>; #phy-cells = <1>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt index f37b3a86341d..300830dda0bf 100644 --- a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt @@ -16,5 +16,4 @@ usb_phy: usb_phy@2620738 { #address-cells = <1>; #size-cells = <1>; reg = <0x2620738 32>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index faf18084a33a..41e09ed2ca70 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -51,14 +51,12 @@ u3phy: usb-phy@11290000 { #address-cells = <2>; #size-cells = <2>; ranges; - status = "okay"; u2port0: usb-phy@11290800 { reg = <0 0x11290800 0 0x100>; clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; u3port0: usb-phy@11290900 { @@ -66,7 +64,6 @@ u3phy: usb-phy@11290000 { clocks = <&clk26m>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; u2port1: usb-phy@11291000 { @@ -74,7 +71,6 @@ u3phy: usb-phy@11290000 { clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; clock-names = "ref"; #phy-cells = <1>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt index f95b6260a3b3..64afdd13d91d 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt @@ -18,7 +18,6 @@ Example: clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; }; Armada 375 USB cluster diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt index a67ef2a3874f..074a7b3b0425 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -67,14 +67,12 @@ grf: syscon@ff770000 { <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "otg-id", "otg-bvalid", "linestate"; - status = "okay"; }; u2phy_host: host-port { #phy-cells = <0>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "linestate"; - status = "okay"; }; }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt index 86f2dbe07ed4..a1697c27aecd 100644 --- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt @@ -25,7 +25,6 @@ Example: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; phy@100f8830 { @@ -35,5 +34,4 @@ Example: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index ab80bfe31cb3..1c40ccd40ce4 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -82,7 +82,6 @@ usbphy: phy@125b0000 { reg = <0x125b0000 0x100>; clocks = <&clock 305>, <&clock 2>; clock-names = "phy", "ref"; - status = "okay"; #phy-cells = <1>; samsung,sysreg-phandle = <&sys_reg>; samsung,pmureg-phandle = <&pmu_reg>; diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index 1cca85c709d1..f9853156e311 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -33,6 +33,5 @@ Example: clock-names = "hsic_480M", "hsic_12M", "phy"; resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; reset-names = "hsic", "phy"; - status = "disabled"; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 590e60378be3..3e23fece99da 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -148,5 +148,4 @@ dbgu: serial@fffff200 { interrupts = <1 4 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 9fde25f1401a..42d74f8a1bcc 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -61,7 +61,6 @@ Examples: usdhc@0219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt index 8c5d27c5b562..6666277c3acb 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt @@ -61,7 +61,6 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as: i2c1: i2c@30a20000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>; - status = "okay"; }; iomuxc-lpsr@302c0000 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt index f2abdaee9022..e0e886b73527 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt @@ -56,5 +56,4 @@ Example: pinctrl-0 = <&state_dpaux_i2c>; pinctrl-1 = <&state_dpaux_off>; pinctrl-names = "default", "idle"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt index 09e81a95bbfd..b1159434f593 100644 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt @@ -50,7 +50,6 @@ uart2: serial@900000 { reg-io-width = <1>; current-speed = <115200>; no-loopback-test; - status = "disabled"; resets = <&reset 22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt index e219849b21ca..39170f372599 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt @@ -81,5 +81,4 @@ pmm: pin-controller@1462000 { &vga { pinctrl-names = "default"; pinctrl-0 = <&vga_pins>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index f4d127df980d..9b4f8041c36a 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -112,7 +112,7 @@ Examples Example 1: SH73A0 (SH-Mobile AG5) pin controller node - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; @@ -173,5 +173,4 @@ Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device bus-width = <8>; vmmc-supply = <®_1p8v>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 58b7921b4fed..4864e3a74de3 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -121,7 +121,6 @@ uart2: serial@20064000 { reg-shift = <2>; reg-io-width = <1>; clocks = <&mux_uart2>; - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index d907a74f8dc0..33e3d3c47552 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -180,5 +180,4 @@ pin-controller { &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt index 4f7a3bc9c407..e45affea8078 100644 --- a/Documentation/devicetree/bindings/power/power-controller.txt +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -13,6 +13,5 @@ Example: act8846: act8846@5 { compatible = "active-semi,act8846"; - status = "okay"; system-power-controller; } diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt index 83734dc3a389..b63948737d80 100644 --- a/Documentation/devicetree/bindings/power/reset/st-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt @@ -8,5 +8,4 @@ Example node: restart { compatible = "st,stih407-restart"; st,syscfg = <&syscfg_sbc_reg>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt index de78d761ce44..b86ecada4f84 100644 --- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt @@ -29,7 +29,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; charger { compatible = "active-semi,act8945a-charger"; @@ -43,6 +42,5 @@ Example: active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt index f0f4e12b076e..bab947fef025 100644 --- a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt @@ -21,5 +21,4 @@ Example: flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt index e03e85ae6572..d6e8dfd0a581 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt @@ -12,7 +12,6 @@ Example: clock-frequency = <50000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; max14656@35 { compatible = "maxim,max14656"; diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt index 7c04e22a5d6a..6b1075ee8a30 100644 --- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt +++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt @@ -16,5 +16,4 @@ Example: ptp: ptp-dte@180af650 { compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte"; reg = <0x180af650 0x10>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 5b07bebbf6f7..1ee81321c35e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -19,7 +19,6 @@ Example: compatible = "amlogic,meson-gxbb-pwm"; reg = <0x0 0x08550 0x0 0x10>; #pwm-cells = <3>; - status = "disabled"; clocks = <&xtal>, <&xtal>; clock-names = "clkin0", "clkin1"; } diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index f1cbeefb3087..c5171660eaf9 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -19,5 +19,4 @@ Example: reg = <0x01c20e00 0xc>; clocks = <&osc24M>; #pwm-cells = <3>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt index 1a5d7b71db89..4633697fbda1 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt @@ -26,7 +26,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am33xx */ ti,hwmods = "epwmss0"; #address-cells = <1>; #size-cells = <1>; - status = "disabled"; ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 0x48300180 0x48300180 0x80 /* EQEP */ 0x48300200 0x48300200 0x80>; /* EHRPWM */ @@ -40,7 +39,6 @@ epwmss0: epwmss@48300000 { /* PWMSS for am4372 */ ti,hwmods = "epwmss0"; #address-cells = <1>; #size-cells = <1>; - status = "disabled"; ranges = <0x48300100 0x48300100 0x80 /* ECAP */ 0x48300180 0x48300180 0x80 /* EQEP */ 0x48300200 0x48300200 0x80>; /* EHRPWM */ diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 6067d9830d07..3ae9f1088845 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -52,7 +52,6 @@ Example: compatible = "active-semi,act8865"; reg = <0x5b>; active-semi,vsel-high; - status = "disabled"; regulators { vcc_1v8_reg: DCDC_REG1 { diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt index 5c80a7779552..ac955dea00d1 100644 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -23,7 +23,6 @@ Example: pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; - status = "okay"; active-semi,vsel-high; diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt index b4e96a278445..05d5be48dae4 100644 --- a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt +++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt @@ -80,5 +80,4 @@ mac: ethernet@40010000 { clock-names = "stmmaceth"; resets = <&rgu 22>; reset-names = "stmmaceth"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt index 0a4c371a9b7a..a66692a08ace 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -45,5 +45,4 @@ Example: interrupts = <17 1>; interrupt-names = "alarm"; st,syscfg = <&pwrcfg>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt index 2a42a323fa1a..b6a869f97715 100644 --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -85,5 +85,4 @@ Example: <366 1>,<367 1>/* cq30-31 */ <376 4>,/* fatal ecc */ <381 4>;/* fatal axi */ - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt index 3ad115efed1e..6a4e0d30d8c4 100644 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt @@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): &i2c2 { - status = "okay"; st33zp24: st33zp24@13 { diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt index 158b0165e01c..604dce901b60 100644 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt @@ -18,7 +18,6 @@ Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4): &mcspi4 { - status = "okay"; st33zp24@0 { diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 8cb638b7e89c..3eca6de6369d 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -17,5 +17,4 @@ tpm@57 { compatible = "nuvoton,npct650", "nuvoton,npct601"; linux,sml-base = <0x7f 0xfd450000>; linux,sml-size = <0x10000>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt index 85741cd468cc..b800667da92b 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt @@ -13,7 +13,6 @@ Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4): &mcspi4 { - status = "okay"; tpm_tis@0 { diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt index 5cae2eb686f8..256cc150ca7e 100644 --- a/Documentation/devicetree/bindings/serial/arc-uart.txt +++ b/Documentation/devicetree/bindings/serial/arc-uart.txt @@ -15,7 +15,6 @@ arcuart0: serial@c0fc1000 { interrupts = <5>; clock-frequency = <80000000>; current-speed = <115200>; - status = "okay"; }; Note: Each port should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt index 51b3c9e80ad9..048c3818c826 100644 --- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -15,7 +15,6 @@ serial@b00260000 { compatible = "axis,etraxfs-uart"; reg = <0xb0026000 0x1000>; interrupts = <68>; - status = "disabled"; dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index c93a2d1c1a65..d7edf732eb7f 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -33,5 +33,4 @@ serial@70006000 { reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index d5f73b8f614f..9d098cf73b53 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -72,13 +72,10 @@ Examples: }; uarta: serial@12490000 { - status = "ok"; }; uartb: serial@16340000 { - status = "ok"; }; uartc: serial@1a240000 { - status = "ok"; }; diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt index b542a0ecf06e..863c2893759e 100644 --- a/Documentation/devicetree/bindings/serial/serial.txt +++ b/Documentation/devicetree/bindings/serial/serial.txt @@ -43,7 +43,6 @@ Examples: rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - status = "okay"; }; scifa4: serial@e6c80000 { @@ -54,5 +53,4 @@ Examples: clock-names = "fck"; power-domains = <&pd_a3sp>; uart-has-rtscts; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt index 362a76925bcd..f311472990a7 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -19,5 +19,4 @@ Example: reg = <0x01c2a000 0x400>; interrupts = <0 62 4>; clocks = <&apb1_gates 6>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt index 2f5ede39bea2..fe1855f09dcc 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -78,7 +78,6 @@ Example for APQ8064: interrupts = <0 152 0x0>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; - status = "ok"; }; }; diff --git a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt index bf984d238620..953c092db72f 100644 --- a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt +++ b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt @@ -23,5 +23,4 @@ Example: compatible = "marvell,a370db-audio"; marvell,audio-controller = <&audio_controller>; marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index fdb25b492514..9d049d4bfd58 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -45,7 +45,6 @@ Example: &ssc0 { #sound-dai-cells = <0>; - status = "okay"; }; &i2c { diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt index b139e66d2a11..630bf7c0344d 100644 --- a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -47,21 +47,17 @@ Example: ssp0: ssp_port@0 { reg = <0>; - status = "okay"; }; ssp1: ssp_port@1 { reg = <1>; - status = "disabled"; }; ssp2: ssp_port@2 { reg = <2>; - status = "disabled"; }; spdif: spdif_port@3 { reg = <3>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt index e0b6165c9cfc..3ffc2562fb31 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt @@ -47,5 +47,4 @@ mcbsp0: mcbsp@1d10000 { dmas = <&edma0 3 1 &edma0 2 1>; dma-names = "tx", "rx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 3e26a9478e57..65979b205893 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -61,5 +61,4 @@ asrc: asrc@02034000 { "txa", "txb", "txc"; fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index cd3ee5d84f03..21c401e2ccda 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -59,5 +59,4 @@ esai: esai@02024000 { fsl,fifo-depth = <128>; fsl,esai-synchronous; big-endian; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 4ca39ddc0417..0f97e54c3d43 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -59,5 +59,4 @@ spdif: spdif@02004000 { "rxtx7"; big-endian; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt index 31af7bca3099..56407c30e954 100644 --- a/Documentation/devicetree/bindings/sound/hdmi.txt +++ b/Documentation/devicetree/bindings/sound/hdmi.txt @@ -13,5 +13,4 @@ Example node: hdmi_audio: hdmi_audio@0 { compatible = "linux,hdmi-audio"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index a1536fdc60e6..085bec364caf 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -621,7 +621,6 @@ Example: simple sound card /* Single DAI */ #sound-dai-cells = <0>; - status = "okay"; rcar_sound,dai { dai0 { @@ -667,7 +666,6 @@ Example: simple sound card for Multi channel /* Single DAI */ #sound-dai-cells = <0>; - status = "okay"; rcar_sound,dai { dai0 { diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt index 2ad66f649a28..47f164fbd1d7 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt @@ -38,5 +38,4 @@ pdm: pdm@ff040000 { &pdmm0_sdi1_sleep &pdmm0_sdi2_sleep &pdmm0_sdi3_sleep>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 4706b96d450b..0a1dc4e1815c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -41,6 +41,5 @@ spdif: spdif@0x1011e000 { dma-names = "tx"; clock-names = "hclk", "mclk"; clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; - status = "disabled"; #sound-dai-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 745dc62f76ea..40068ec0e9a5 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -53,7 +53,6 @@ Example: sti_uni_player1: sti-uni-player@0x8D81000 { compatible = "st,stih407-uni-player-hdmi"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_1>; @@ -66,7 +65,6 @@ Example: sti_uni_player2: sti-uni-player@0x8D82000 { compatible = "st,stih407-uni-player-pcm-out"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; @@ -78,7 +76,6 @@ Example: sti_uni_player3: sti-uni-player@0x8D85000 { compatible = "st,stih407-uni-player-spdif"; - status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; @@ -90,7 +87,6 @@ Example: sti_uni_reader1: sti-uni-reader@0x8D84000 { compatible = "st,stih407-uni-reader-hdmi"; - status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8D84000 0x158>; @@ -125,7 +121,6 @@ Example of audio card declaration: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sti audio card"; - status = "okay"; simple-audio-card,dai-link@0 { /* DAC */ diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index fe0a65e6d629..70ee177901d3 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -39,5 +39,4 @@ spdif: spdif@01c21000 { clock-names = "apb", "spdif"; dmas = <&dma 0 2>, <&dma 0 2>; dma-names = "rx", "tx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt index 806ea7381483..40d94f82beb3 100644 --- a/Documentation/devicetree/bindings/sound/tas5720.txt +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -17,7 +17,6 @@ Required properties: Example: tas5720: tas5720@6c { - status = "okay"; compatible = "ti,tas5720"; reg = <0x6c>; dvdd-supply = <&vdd_3v3_reg>; diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt index 292ad5083704..3927251464f0 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt @@ -27,7 +27,6 @@ Example: interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 5>, <&dma 6>; dma-names = "tx", "rx"; - status = "okay"; }; sound { diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index 989544ea6eb5..b5a5ca4502f9 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -24,5 +24,4 @@ Example: interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 4>; dma-names = "tx"; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 750e29aff9bc..2c1e6a43930b 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -28,7 +28,6 @@ spi1: spi@0x4000c400 { /* USART1 */ clocks = <&cmu 20>; cs-gpios = <&gpio 51 1>; // D3 energymicro,location = <1>; - status = "ok"; ks8851@0 { compatible = "ks8851"; @@ -36,6 +35,5 @@ spi1: spi@0x4000c400 { /* USART1 */ reg = <0>; interrupt-parent = <&boardfpga>; interrupts = <4>; - status = "ok"; }; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index b785976fe98a..9ba7c5a273b4 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -38,5 +38,4 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt index bdf08e6dec9b..c212491929b5 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt @@ -34,5 +34,4 @@ spi@7000c380 { reset-names = "spi"; dmas = <&apbdma 11>, <&apbdma 11>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt index 5db9144a33c8..40d80b93e327 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt @@ -34,5 +34,4 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt index 319bad4af875..585fed90376e 100644 --- a/Documentation/devicetree/bindings/spi/sh-hspi.txt +++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt @@ -24,6 +24,5 @@ Example: interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 39e5ef7c5e71..e865855726a2 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -79,5 +79,4 @@ Example: dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt index 4c3ec13f423f..5122dc7860af 100644 --- a/Documentation/devicetree/bindings/spi/spi-clps711x.txt +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt @@ -23,7 +23,6 @@ spi@80000500 { reg = <0x80000500 0x4>; interrupts = <15>; clocks = <&clks CLPS711X_CLK_SPI>; - status = "disabled"; }; syscon3: syscon@80002200 { diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index ff5893d275a2..13b1fcc8469e 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -39,7 +39,6 @@ dspi0@4002c000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dspi0_1>; big-endian; - status = "okay"; sflash: at26df081a@0 { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index e0318cf92d73..236dcb0faf37 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -57,5 +57,4 @@ spi: spi@1100a000 { clock-names = "parent-clk", "sel-clk", "spi-clk"; cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>; mediatek,pad-select = <1>, <0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index 4f629cc7634a..df8ec31f2f07 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -29,7 +29,6 @@ Example: cell-index = <0>; reg = <0x10600 0x28>; interrupts = <23>; - status = "disabled"; }; Example with SPI direct mode support (optionally): @@ -48,7 +47,6 @@ Example with SPI direct mode support (optionally): <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */ <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */ interrupts = <23>; - status = "disabled"; }; To enable the direct mode, the board specific 'ranges' property in the diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index de827f5a301e..484bbff5337e 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -18,7 +18,6 @@ spi1: spi@01c06000 { interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index 2ec99b86b622..ab1811354cce 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -39,7 +39,6 @@ spi0: spi@01c68000 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt index fb588b3e6a9a..f99c733d75c1 100644 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt @@ -26,7 +26,6 @@ spi1: spi@fffcc000 { clock-names = "spi_clk"; cs-gpios = <&pioB 3 0>; atmel,fifo-size = <32>; - status = "okay"; mmc-slot@0 { compatible = "mmc-spi-slot"; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 8d5665468fe7..170034e6c8b0 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -59,7 +59,6 @@ sram-controller@01c00000 { emac_sram: sram-section@8000 { compatible = "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; - status = "disabled"; }; }; }; diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index 4698e0edc205..24aacf8948c5 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -20,5 +20,4 @@ Example: compatible = "marvell,armada370-thermal"; reg = <0xd0018300 0x4 0xd0018304 0x4>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 70b4c16c7ed8..9b4c7b017495 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -77,7 +77,6 @@ Example 1): interrupts = <2 4>; clocks = <&clock 383>; clock-names = "tmu_apbif"; - status = "disabled"; vtmu-supply = <&tmu_regulator_node>; #include "exynos4412-tmu-sensor-conf.dtsi" }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt index 07a9713ae6a7..fdf5caa6229b 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -36,7 +36,6 @@ Example: clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #thermal-sensor-cells = <1>; - status = "okay"; }; thermal-zones { diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index 35f406dd86b6..af284fbd4d23 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -21,6 +21,16 @@ adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) ams,iaq-core AMS iAQ-Core VOC Sensor +amstaos,tsl2571 AMS/TAOS ALS and proximity sensor +amstaos,tsl2671 AMS/TAOS ALS and proximity sensor +amstaos,tmd2671 AMS/TAOS ALS and proximity sensor +amstaos,tsl2771 AMS/TAOS ALS and proximity sensor +amstaos,tmd2771 AMS/TAOS ALS and proximity sensor +amstaos,tsl2572 AMS/TAOS ALS and proximity sensor +amstaos,tsl2672 AMS/TAOS ALS and proximity sensor +amstaos,tmd2672 AMS/TAOS ALS and proximity sensor +amstaos,tsl2772 AMS/TAOS ALS and proximity sensor +amstaos,tmd2772 AMS/TAOS ALS and proximity sensor at,24c08 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor @@ -36,7 +46,9 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat +devantech,srf02 Devantech SRF02 ultrasonic ranger in I2C mode devantech,srf08 Devantech SRF08 ultrasonic ranger +devantech,srf10 Devantech SRF10 ultrasonic ranger dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer @@ -54,6 +66,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator @@ -168,6 +181,7 @@ st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC +ti,amc6821 Temperature Monitoring and Fan Control ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt index 3bf58c20fe94..9a5b311f4434 100644 --- a/Documentation/devicetree/bindings/unittest.txt +++ b/Documentation/devicetree/bindings/unittest.txt @@ -10,7 +10,6 @@ All other properties are optional. Example: unittest { compatible = "unittest"; - status = "okay"; }; 2) OF unittest i2c adapter platform device @@ -25,7 +24,6 @@ Children nodes contain unittest i2c devices. Example: unittest-i2c-bus { compatible = "unittest-i2c-bus"; - status = "okay"; }; 3) OF unittest i2c device @@ -40,7 +38,6 @@ All other properties are optional Example: unittest-i2c-dev { compatible = "unittest-i2c-dev"; - status = "okay"; }; 4) OF unittest i2c mux device @@ -55,7 +52,6 @@ Children nodes contain unittest i2c bus nodes per channel. Example: unittest-i2c-mux { compatible = "unittest-i2c-mux"; - status = "okay"; #address-cells = <1>; #size-cells = <0>; channel-0 { @@ -65,7 +61,6 @@ Example: i2c-dev { reg = <8>; compatible = "unittest-i2c-dev"; - status = "okay"; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index d9b42da016f3..cb2bd83fa89a 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -25,5 +25,4 @@ Example: phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 20c2ff2ba07e..16920d78e1b8 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -4,9 +4,9 @@ - reg: offset and length of the usbss register sets - ti,hwmods : must be "usb_otg_hs" -The glue layer contains multiple child nodes. It is required the have +The glue layer contains multiple child nodes. It is required to have at least a control module node, USB node and a PHY node. The second USB -node and its PHY node is optional. The DMA node is also optional. +node and its PHY node are optional. The DMA node is also optional. Reset module ~~~~~~~~~~~~ diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt index 717c5f656237..9ce22551b2b3 100644 --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt @@ -42,7 +42,6 @@ Example: usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <0>; - status = "okay"; }; usb0: usb@200000 { compatible = "ti,da830-musb"; @@ -66,7 +65,6 @@ Example: "rx1", "rx2", "rx3", "rx4", "tx1", "tx2", "tx3", "tx4"; - status = "okay"; cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index 50dee3b44665..df0e02e1ee43 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -42,7 +42,6 @@ or "device". Example: st_dwc3: dwc3@8f94000 { - status = "disabled"; compatible = "st,stih407-dwc3"; reg = <0x08f94000 0x1000>, <0x110 0x4>; reg-names = "reg-glue", "syscfg-reg"; diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt index 30361b32a460..4aae5b2cef56 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -18,7 +18,6 @@ Example device node: usb@0 { #address-cells = <0x2>; #size-cells = <0x1>; - status = "okay"; compatible = "xlnx,zynqmp-dwc3"; clock-names = "bus_clk" "ref_clk"; clocks = <&clk125>, <&clk125>; diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 410d922cfdd7..9feea6c3e4d9 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -31,7 +31,6 @@ Example: clocks = <&clk_s_a1_ls 0>; phys = <&usb2_phy>; phy-names = "usb"; - status = "okay"; resets = <&powerdown STIH416_USB1_POWERDOWN>, <&softreset STIH416_USB1_SOFTRESET>; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 78ebebb66dad..c97374315049 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -40,7 +40,6 @@ Example: port@0 { reg = <0>; phys = <&usb2phy 1>; - status = "disabled"; }; }; @@ -75,7 +74,6 @@ Example: port@0 { reg = <0>; phys = <&usb2phy 1>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt index 5405d99d9aaa..ecd607dacba5 100644 --- a/Documentation/devicetree/bindings/usb/isp1301.txt +++ b/Documentation/devicetree/bindings/usb/isp1301.txt @@ -21,5 +21,4 @@ Example: interrupt-parent = <&mic>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; transceiver = <&isp1301>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt index 2d1bef16f149..f96e09f784cc 100644 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -44,7 +44,6 @@ Example: clock-names = "usb"; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; ranges; - status = "disabled"; dwc3@2690000 { compatible = "synopsys,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 838ae48eafc1..49f54767cd21 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -75,7 +75,6 @@ ssusb: usb@11271000 { #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usb_host: xhci@11270000 { compatible = "mediatek,mt8173-xhci"; @@ -86,6 +85,5 @@ ssusb: usb@11271000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index 6d8393748da2..d893ec9131c3 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -29,7 +29,6 @@ Example: clock-names = "ic", "clk48"; phys = <&usb2_phy>; phy-names = "usb"; - status = "okay"; resets = <&powerdown STIH416_USB0_POWERDOWN>, <&softreset STIH416_USB0_SOFTRESET>; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index 73cc0963e823..bc8a2fa5d2bf 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -29,7 +29,6 @@ Example device nodes: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; ss_phy: phy@100f8830 { @@ -39,7 +38,6 @@ Example device nodes: clock-names = "ref"; #phy-cells = <0>; - status = "ok"; }; usb3_0: usb30@0 { @@ -51,7 +49,6 @@ Example device nodes: ranges; - status = "ok"; dwc3@10000000 { compatible = "snps,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 0536a938e3ab..50a31536e975 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -29,13 +29,11 @@ Example device nodes: #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usbdrd_dwc3_0: dwc3@fe800000 { compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "otg"; - status = "disabled"; }; }; @@ -48,12 +46,10 @@ Example device nodes: #address-cells = <2>; #size-cells = <2>; ranges; - status = "disabled"; usbdrd_dwc3_1: dwc3@fe900000 { compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "otg"; - status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 1c35e7b665e1..ce02cebac26a 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -2,7 +2,7 @@ Generic USB Device Properties Usually, we only use device tree for hard wired USB device. The reference binding doc is from: -http://www.firmware.org/1275/bindings/usb/usb-1_0.ps +http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps Required properties: - compatible: usbVID,PID. The textual representation of VID, PID shall @@ -16,7 +16,6 @@ Required properties: Example: &usb1 { - status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index f58c9323b92b..401ed98cab18 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -9,6 +9,7 @@ actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH adapteva Adapteva, Inc. +adaptrum Adaptrum, Inc. adh AD Holdings Plc. adi Analog Devices, Inc. advantech Advantech Corporation @@ -197,6 +198,7 @@ mediatek MediaTek Inc. megachips MegaChips melexis Melexis N.V. melfas MELFAS Inc. +mellanox Mellanox Technologies memsic MEMSIC Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. @@ -208,7 +210,7 @@ miramems MiraMEMS Sensing Technology Co., Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. motorola Motorola, Inc. -moxa Moxa +moxa Moxa Inc. mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. @@ -344,6 +346,7 @@ tpo TPO tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited +tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics udoo Udoo diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt index ecf42c07684d..cbaa6467ab2c 100644 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.txt @@ -15,5 +15,4 @@ owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; clocks = <&clks 159>; - status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt index f7cc7c060910..4fec1e3725b4 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt @@ -31,5 +31,4 @@ Example: atmel,watchdog-type = "hardware"; atmel,dbg-halt; atmel,idle-halt; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index 86fa6de1019b..711a880b3d3b 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -48,5 +48,4 @@ Example: atmel,idle-halt; atmel,max-heartbeat-sec = <16>; atmel,min-heartbeat-sec = <0>; - status = "okay"; }; diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt index 858ed9221ac4..c1b67a78f00c 100644 --- a/Documentation/devicetree/bindings/watchdog/marvel.txt +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt @@ -41,6 +41,5 @@ Example: reg = <0x20300 0x28>, <0x20108 0x4>; interrupts = <3>; timeout-sec = <10>; - status = "okay"; clocks = <&gate_clk 7>; }; |