diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
20 files changed, 617 insertions, 363 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt deleted file mode 100644 index 66788fda1db3..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ /dev/null @@ -1,29 +0,0 @@ -twl4030 GPIO controller bindings - -Required properties: -- compatible: - - "ti,twl4030-gpio" for twl4030 GPIO controller -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller - The first cell is the GPIO number. - The second cell is not used. -- ti,use-leds : Enables LEDA and LEDB outputs if set -- ti,debounce : if n-th bit is set, debounces GPIO-n -- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) -- ti,pullups : if n-th bit is set, set a pullup on GPIO-n -- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n - -Example: - -twl_gpio: gpio { - compatible = "ti,twl4030-gpio"; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - ti,use-leds; -}; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index bef86e57c388..fc6a1ba5021c 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -81,7 +81,10 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface -ti,tsc2003 I2C Touch-Screen Controller +ti,bq27200 Battery Monitor +ti,bq27500 Battery Monitor +ti,bq27425 Battery Monitor ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp275 Digital Temperature Sensor +ti,tsc2003 I2C Touch-Screen Controller winbond,wpct301 i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt new file mode 100644 index 000000000000..d8e06163c54e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -0,0 +1,27 @@ +General Touchscreen Properties: + +Optional properties for Touchscreens: + - touchscreen-size-x : horizontal resolution of touchscreen + (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen + (in pixels) + - touchscreen-max-pressure : maximum reported pressure (arbitrary range + dependent on the controller) + - touchscreen-fuzz-x : horizontal noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-y : vertical noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-pressure : pressure noise value of the absolute input + device (arbitrary range dependent on the + controller) + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + +Deprecated properties for Touchscreens: + - x-size : deprecated name for touchscreen-size-x + - y-size : deprecated name for touchscreen-size-y + - moving-threshold : deprecated name for a combination of + touchscreen-fuzz-x and touchscreen-fuzz-y + - contact-threshold : deprecated name for touchscreen-fuzz-pressure + - x-invert : deprecated name for touchscreen-inverted-x + - y-invert : deprecated name for touchscreen-inverted-y diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt new file mode 100644 index 000000000000..663f8ab96614 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt @@ -0,0 +1,39 @@ +* Texas Instruments tsc2005 touchscreen controller + +Required properties: + - compatible : "ti,tsc2005" + - reg : SPI device address + - spi-max-frequency : Maximal SPI speed + - interrupts : IRQ specifier + - reset-gpios : GPIO specifier + +Optional properties: + - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates + in ohm (defaults to 280) + - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after + the configured time (in milli seconds), the driver + will reset it. This is disabled by default. + - properties defined in touchscreen.txt + +Example: + +&mcspi1 { + tsc2005@0 { + compatible = "ti,tsc2005"; + spi-max-frequency = <6000000>; + reg = <0>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_NONE>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-max-x = <4096>; + touchscreen-max-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +} diff --git a/Documentation/devicetree/bindings/input/twl4030-keypad.txt b/Documentation/devicetree/bindings/input/twl4030-keypad.txt deleted file mode 100644 index e4be2f76a717..000000000000 --- a/Documentation/devicetree/bindings/input/twl4030-keypad.txt +++ /dev/null @@ -1,27 +0,0 @@ -* TWL4030's Keypad Controller device tree bindings - -TWL4030's Keypad controller is used to interface a SoC with a matrix-type -keypad device. The keypad controller supports multiple row and column lines. -A key can be placed at each intersection of a unique row and a unique column. -The keypad controller can sense a key-press and key-release and report the -event using a interrupt to the cpu. - -This binding is based on the matrix-keymap binding with the following -changes: - - * keypad,num-rows and keypad,num-columns are required. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad - controller. -- interrupt: should be one of the following - - <1>: For controllers compatible with twl4030 keypad controller. - -Example: - twl_keypad: keypad { - compatible = "ti,twl4030-keypad"; - interrupts = <1>; - keypad,num-rows = <8>; - keypad,num-columns = <8>; - }; diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt deleted file mode 100644 index c864a46cddcf..000000000000 --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt +++ /dev/null @@ -1,21 +0,0 @@ -Texas Instruments TWL family (twl4030) pwrbutton module - -This module is part of the TWL4030. For more details about the whole -chip see Documentation/devicetree/bindings/mfd/twl-familly.txt. - -This module provides a simple power button event via an Interrupt. - -Required properties: -- compatible: should be one of the following - - "ti,twl4030-pwrbutton": For controllers compatible with twl4030 -- interrupts: should be one of the following - - <8>: For controllers compatible with twl4030 - -Example: - -&twl { - twl_pwrbutton: pwrbutton { - compatible = "ti,twl4030-pwrbutton"; - interrupts = <8>; - }; -}; diff --git a/Documentation/devicetree/bindings/media/si4713.txt b/Documentation/devicetree/bindings/media/si4713.txt new file mode 100644 index 000000000000..5ee5552d3465 --- /dev/null +++ b/Documentation/devicetree/bindings/media/si4713.txt @@ -0,0 +1,30 @@ +* Silicon Labs FM Radio transmitter + +The Silicon Labs Si4713 is an FM radio transmitter with receive power scan +supporting 76-108 MHz. It includes an RDS encoder and has both, a stereo-analog +and a digital interface, which supports I2S, left-justified and a custom +DSP-mode format. It is programmable through an I2C interface. + +Required Properties: +- compatible: Should contain "silabs,si4713" +- reg: the I2C address of the device + +Optional Properties: +- interrupts-extended: Interrupt specifier for the chips interrupt +- reset-gpios: GPIO specifier for the chips reset line +- vdd-supply: phandle for Vdd regulator +- vio-supply: phandle for Vio regulator + +Example: + +&i2c2 { + fmtx: si4713@63 { + compatible = "silabs,si4713"; + reg = <0x63>; + + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ + reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ + vio-supply = <&vio>; + vdd-supply = <&vaux1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt deleted file mode 100644 index a66fcf946759..000000000000 --- a/Documentation/devicetree/bindings/mfd/twl-familly.txt +++ /dev/null @@ -1,47 +0,0 @@ -Texas Instruments TWL family - -The TWLs are Integrated Power Management Chips. -Some version might contain much more analog function like -USB transceiver or Audio amplifier. -These chips are connected to an i2c bus. - - -Required properties: -- compatible : Must be "ti,twl4030"; - For Integrated power-management/audio CODEC device used in OMAP3 - based boards -- compatible : Must be "ti,twl6030"; - For Integrated power-management used in OMAP4 based boards -- interrupts : This i2c device has an IRQ line connected to the main SoC -- interrupt-controller : Since the twl support several interrupts internally, - it is considered as an interrupt controller cascaded to the SoC one. -- #interrupt-cells = <1>; -- interrupt-parent : The parent interrupt controller. - -Optional node: -- Child nodes contain in the twl. The twl family is made of several variants - that support a different number of features. - The children nodes will thus depend of the capability of the variant. - - -Example: -/* - * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/twl6030.pdf - */ -twl@48 { - compatible = "ti,twl6030"; - reg = <0x48>; - interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <0>; - - twl_rtc { - compatible = "ti,twl_rtc"; - interrupts = <11>; - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt new file mode 100644 index 000000000000..65f83ab86038 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl-family.txt @@ -0,0 +1,457 @@ +Texas Instruments TWL family +---------------------------- + +The TWLs are i2c connected Integrated Power Management Chips. +Some version contain much more analog function like +USB transceiver or Audio amplifier. + +The TWL family provide have an integrated interrupt controller +used by the internal subcomponents. + +Required properties: +- compatible: Should contain: + * "ti,twl4030": For integrated power-management/audio CODEC device + used in OMAP3 boards. + * "ti,twl6030": For integrated power-management device used in OMAP4 + based boards. +- interrupts: interrupt-specifier for the sole interrupt generated by + the device. +- interrupt-controller : Since the twl support several interrupts internally, + it is considered as an interrupt controller cascaded to the SoC one. +- #interrupt-cells: must be <1> + +Optional properties: +- interrupt-parent : The parent interrupt controller. This property is + optional if the implicit interrupt controller is correct. + +Optional nodes: +- Child nodes contained in the twl. The twl family is made of several + variants that support a different number of features. The children + nodes will thus depend of the capability of the variant. + +TWL Regulator +------------- + +Required properties: +For twl6030 regulators/LDOs +- compatible: + - "ti,twl6030-vaux1" for VAUX1 LDO + - "ti,twl6030-vaux2" for VAUX2 LDO + - "ti,twl6030-vaux3" for VAUX3 LDO + - "ti,twl6030-vmmc" for VMMC LDO + - "ti,twl6030-vpp" for VPP LDO + - "ti,twl6030-vusim" for VUSIM LDO + - "ti,twl6030-vana" for VANA LDO + - "ti,twl6030-vcxio" for VCXIO LDO + - "ti,twl6030-vdac" for VDAC LDO + - "ti,twl6030-vusb" for VUSB LDO + - "ti,twl6030-v1v8" for V1V8 LDO + - "ti,twl6030-v2v1" for V2V1 LDO + - "ti,twl6030-vdd1" for VDD1 SMPS + - "ti,twl6030-vdd2" for VDD2 SMPS + - "ti,twl6030-vdd3" for VDD3 SMPS +For twl6032 regulators/LDOs +- compatible: + - "ti,twl6032-ldo1" for LDO1 LDO + - "ti,twl6032-ldo2" for LDO2 LDO + - "ti,twl6032-ldo3" for LDO3 LDO + - "ti,twl6032-ldo4" for LDO4 LDO + - "ti,twl6032-ldo5" for LDO5 LDO + - "ti,twl6032-ldo6" for LDO6 LDO + - "ti,twl6032-ldo7" for LDO7 LDO + - "ti,twl6032-ldoln" for LDOLN LDO + - "ti,twl6032-ldousb" for LDOUSB LDO + - "ti,twl6032-smps3" for SMPS3 SMPS + - "ti,twl6032-smps4" for SMPS4 SMPS + - "ti,twl6032-vio" for VIO SMPS +For twl4030 regulators/LDOs +- compatible: + - "ti,twl4030-vaux1" for VAUX1 LDO + - "ti,twl4030-vaux2" for VAUX2 LDO + - "ti,twl5030-vaux2" for VAUX2 LDO + - "ti,twl4030-vaux3" for VAUX3 LDO + - "ti,twl4030-vaux4" for VAUX4 LDO + - "ti,twl4030-vmmc1" for VMMC1 LDO + - "ti,twl4030-vmmc2" for VMMC2 LDO + - "ti,twl4030-vpll1" for VPLL1 LDO + - "ti,twl4030-vpll2" for VPLL2 LDO + - "ti,twl4030-vsim" for VSIM LDO + - "ti,twl4030-vdac" for VDAC LDO + - "ti,twl4030-vintana2" for VINTANA2 LDO + - "ti,twl4030-vio" for VIO LDO + - "ti,twl4030-vdd1" for VDD1 SMPS + - "ti,twl4030-vdd2" for VDD2 SMPS + - "ti,twl4030-vintana1" for VINTANA1 LDO + - "ti,twl4030-vintdig" for VINTDIG LDO + - "ti,twl4030-vusb1v5" for VUSB1V5 LDO + - "ti,twl4030-vusb1v8" for VUSB1V8 LDO + - "ti,twl4030-vusb3v1" for VUSB3V1 LDO + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +TWL RTC +------- + +Required properties: +- compatible : Should be twl4030-rtc + +TWL PWM +------- + +Supported PWMs: +On TWL4030 series: PWM1 and PWM2 +On TWL6030 series: PWM0 and PWM1 + +Required properties: +- compatible: Should contain one of: + * "ti,twl4030-pwm" + * "ti,twl6030-pwm" +- #pwm-cells: should be 2. See Documentation/devicetree/bindings/pwm/pwm.txt + for a description of the cells format. The binding follows the "typical" + encoding. + +TWL PWM LED +----------- + +Supported PWMs: +On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals) +On TWL6030 series: LED PWM (mainly used as charging indicator LED) + +Required properties: +- compatible: Should contain one of: + * "ti,twl4030-pwmled" + * "ti,twl6030-pwmled" +- #pwm-cells: should be 2. See Documentation/devicetree/bindings/pwm/pwm.txt + for a description of the cells format. The binding follows the "typical" + encoding. + +TWL4030 USB PHY AND COMPARATOR +------------------------------ + +Required properties: + - compatible : Should contain "ti,twl4030-usb" + - interrupts: A list of interrupt-specifiers: + [1] The OTG interrupt + [2] The VBUS interrupt (optional) + - vusb1v5-supply: phandle to the TWL's usb 1.5V regulator device + - vusb1v8-supply: phandle to the TWL's usb 1.8V regulator device + - vusb3v1-supply: phandle to the TWL's usb 3.1V regulator device + - usb_mode : The mode used by the phy to connect to the controller. <1> + specifies "ULPI" mode and <2> specifies "CEA2011_3PIN" mode. + +TWL6030 USB COMPARATOR +---------------------- + +Required properties: + - compatible : Should contain "ti,twl6030-usb" + - interrupts : Two interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts when + the controller has to act as host and the second interrupt number is the + usb interrupt number that raises VBUS interrupts when the controller has to + act as device + - usb-supply : phandle to the regulator device tree node. It should be vusb + if it is twl6030 or ldousb if it is twl6032 subclass. + +TWL4030 GPIO Controller +----------------------- + +Required properties: +- compatible: Should contain "ti,twl4030-gpio" +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is a bit field of flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. + The first cell is the GPIO number. + The second cell is not used. +- interrupt-controller: Mark the device node as an interrupt controller +- ti,use-leds : Boolean; enables LEDA and LEDB outputs if set +- ti,debounce : 32 Bit Unsigned; if n-th bit is set, debounces GPIO-n +- ti,mmc-cd : 32 Bit Unsigned; if n-th bit is set, GPIO-n controls VMMC(n+1) +- ti,pullups : 32 Bit Unsigned; if n-th bit is set, set a pullup on GPIO-n +- ti,pulldowns : 32 Bit Unsigned; if n-th bit is set, set a pulldown on GPIO-n + +TWL4030 Audio +------------- + +The audio module inside the TWL family consist of an audio codec and +a vibrator driver. + +Required properties: +- compatible : Should contain "ti,twl4030-audio" + +Optional properties: +- ti,enable-vibra : Should be set to <1> if the vibra functionality is used. + if missing or it is 0, the vibra functionality is disabled. + +The node may contain a subnode named "codec", which may have the +following properties: + +- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts + from the start of the recorded sample (in ms) +- ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise +- ti,hs_extmute: 32 Bit Unsigned; Use external mute for HS pop reduction +- ti,hs_extmute_gpio: GPIO phandle; Use external GPIO to control the external mute +- ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the + valid values. + +TWL4030 Power +------------- + +The power management module inside the TWL family provides several facilities +to control the power resources, including power scripts. For now, the binding +only supports the complete shutdown of the system after poweroff. + +Required properties: +- compatible : Should contain "ti,twl4030-power" + +Optional properties: +- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or + SLEEP-to-OFF transition when the system poweroffs. + +TWL4030 Watchdog +---------------- + +Required properties: +- compatible: Should contain "ti,twl4030-wdt" + +TWL4030 Power Button +-------------------- + +This module provides a simple power button event via an Interrupt. + +Required properties: +- compatible: Should contain "ti,twl4030-pwrbutton" +- interrupts: Should be one of the following + - <8>: For controllers compatible with twl4030 + +TWL4030 Keypad +-------------- + +TWL4030's Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +This binding is based on the matrix-keymap binding with the following +changes: + + * keypad,num-rows is required. + * keypad,num-columns is required. + +Required SoC Specific Properties: +- compatible: Should contain "ti,twl4030-keypad" +- interrupt: Should be one of the following + - <1>: For controllers compatible with twl4030 keypad controller. + +Example +------- + +This is an example for TWL4030 binding (Nokia N900): + +&i2c { + twl@48 { + compatible = "ti,twl4030"; + + interrupt-controller; + #interrupt-cells = <1>; + + reg = <0x48>; + + interrupt-parent = <&intc>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + watchdog { + compatible = "ti,twl4030-wdt"; + }; + + vaux1: regulator-vaux1 { + compatible = "ti,twl4030-vaux1"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; /* due battery cover sensor */ + }; + + vaux2: regulator-vaux2 { + compatible = "ti,twl4030-vaux2"; + + regulator-name = "VCSI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vaux3: regulator-vaux3 { + compatible = "ti,twl4030-vaux3"; + + regulator-name = "VMMC2_30"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + vaux4: regulator-vaux4 { + compatible = "ti,twl4030-vaux4"; + + regulator-name = "VCAM_ANA_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vcc: regulator-vdd1 { + compatible = "ti,twl4030-vdd1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1450000>; + }; + + vdac: regulator-vdac { + compatible = "ti,twl4030-vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vio: regulator-vio { + compatible = "ti,twl4030-vio"; + + regulator-name = "VIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vintana1: regulator-vintana1 { + compatible = "ti,twl4030-vintana1"; + + regulator-name = "VINTANA1"; + /* fixed to 1500000 */ + regulator-always-on; + }; + + vintana2: regulator-vintana2 { + compatible = "ti,twl4030-vintana2"; + + regulator-name = "VINTANA2"; + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + }; + + vintdig: regulator-vintdig { + compatible = "ti,twl4030-vintdig"; + + regulator-name = "VINTDIG"; + /* fixed to 1500000 */ + regulator-always-on; + }; + + vmmc1: regulator-vmmc1 { + compatible = "ti,twl4030-vmmc1"; + + regulator-name = "VMMC1"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; + }; + + vmmc2: regulator-vmmc2 { + compatible = "ti,twl4030-vmmc2"; + + regulator-name = "V28_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; /* due VIO leak to AIC34 VDDs */ + }; + + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + vpll1: regulator-vpll1 { + compatible = "ti,twl4030-vpll1"; + + regulator-name = "VPLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vpll2: regulator-vpll2 { + compatible = "ti,twl4030-vpll2"; + + regulator-name = "VSDI_CSI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + + regulator-name = "VMMC2_IO_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + twl_gpio: gpio { + compatible = "ti,twl4030-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + usb2_phy: twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; + + twl_pwm: pwm { + compatible = "ti,twl4030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + compatible = "ti,twl4030-pwmled"; + #pwm-cells = <2>; + }; + + twl_keypad: keypad { + compatible = "ti,twl4030-keypad"; + interrupts = <1>; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + + linux,keymap = < 0x00000010 /* KEY_Q */ + 0x00010018 /* KEY_O */ + 0x00020019 /* KEY_P */ + /* ... */ + >; + }; + + twl_pwrbutton: pwrbutton { + compatible = "ti,twl4030-pwrbutton"; + interrupts = <8>; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + ti,enable-vibra = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt deleted file mode 100644 index 414d2ae0adf6..000000000000 --- a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Texas Instruments TWL family (twl4030) audio module - -The audio module inside the TWL family consist of an audio codec and a vibra -driver. - -Required properties: -- compatible : must be "ti,twl4030-audio" - -Optional properties, nodes: - -Audio functionality: -- codec { }: Need to be present if the audio functionality is used. Within this - section the following options can be used: -- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts - from the start of the recorded sample (in ms) --ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise --ti,hs_extmute: Use external mute for HS pop reduction --ti,hs_extmute_gpio: Use external GPIO to control the external mute --ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the - valid values. - -Vibra functionality -- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if - missing or it is 0, the vibra functionality is disabled. - -Example: -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - - ti,enable-vibra = <1>; - - codec { - ti,ramp_delay_value = <3>; - }; - - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt deleted file mode 100644 index 8e15ec35ac99..000000000000 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ /dev/null @@ -1,28 +0,0 @@ -Texas Instruments TWL family (twl4030) reset and power management module - -The power management module inside the TWL family provides several facilities -to control the power resources, including power scripts. For now, the -binding only supports the complete shutdown of the system after poweroff. - -Required properties: -- compatible : must be "ti,twl4030-power" - -Optional properties: -- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or - SLEEP-to-OFF transition when the system poweroffs. - -Example: -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - - twl_power: power { - compatible = "ti,twl4030-power"; - ti,use_poweroff; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt index 6def86f6b053..2a19bff9693f 100644 --- a/Documentation/devicetree/bindings/misc/lis302.txt +++ b/Documentation/devicetree/bindings/misc/lis302.txt @@ -46,11 +46,18 @@ Optional properties for all bus drivers: interrupt 2 - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for upper/lower limit + - st,wakeup-threshold: set wakeup threshold + - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit for second wakeup + engine. + - st,wakeup2-threshold: set wakeup threshold for second wakeup + engine. - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of highpass cut-off frequency - st,hipass{1,2}-disable: disable highpass 1/2. - st,default-rate=: set the default rate - - st,axis-{x,y,z}=: set the axis to map to the three coordinates + - st,axis-{x,y,z}=: set the axis to map to the three coordinates. + Negative values can be used for inverted axis. - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis (used by self-test) diff --git a/Documentation/devicetree/bindings/power/rx51-battery.txt b/Documentation/devicetree/bindings/power/rx51-battery.txt new file mode 100644 index 000000000000..90438453db58 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rx51-battery.txt @@ -0,0 +1,25 @@ +Binding for Nokia N900 battery + +The Nokia N900 battery status can be read via the TWL4030's A/D converter. + +Required properties: +- compatible: Should contain one of the following: + * "nokia,n900-battery" +- io-channels: Should contain IIO channel specifiers + for each element in io-channel-names. +- io-channel-names: Should contain the following values: + * "temp" - The ADC channel for temperature reading + * "bsi" - The ADC channel for battery size identification + * "vbat" - The ADC channel to measure the battery voltage + +Example from Nokia N900: + +battery: n900-battery { + compatible = "nokia,n900-battery"; + io-channels = <&twl4030_madc 0>, + <&twl4030_madc 4>, + <&twl4030_madc 12>; + io-channel-names = "temp", + "bsi", + "vbat"; +}; diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt deleted file mode 100644 index 4e32bee11201..000000000000 --- a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt +++ /dev/null @@ -1,17 +0,0 @@ -Texas Instruments TWL series PWM drivers - -Supported PWMs: -On TWL4030 series: PWM1 and PWM2 -On TWL6030 series: PWM0 and PWM1 - -Required properties: -- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm" -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of - the cells format. - -Example: - -twl_pwm: pwm { - compatible = "ti,twl6030-pwm"; - #pwm-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt deleted file mode 100644 index 9f4b46090782..000000000000 --- a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt +++ /dev/null @@ -1,17 +0,0 @@ -Texas Instruments TWL series PWM drivers connected to LED terminals - -Supported PWMs: -On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals) -On TWL6030 series: LED PWM (mainly used as charging indicator LED) - -Required properties: -- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled" -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of - the cells format. - -Example: - -twl_pwmled: pwmled { - compatible = "ti,twl6030-pwmled"; - #pwm-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt deleted file mode 100644 index 75b0c1669504..000000000000 --- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt +++ /dev/null @@ -1,67 +0,0 @@ -TWL family of regulators - -Required properties: -For twl6030 regulators/LDOs -- compatible: - - "ti,twl6030-vaux1" for VAUX1 LDO - - "ti,twl6030-vaux2" for VAUX2 LDO - - "ti,twl6030-vaux3" for VAUX3 LDO - - "ti,twl6030-vmmc" for VMMC LDO - - "ti,twl6030-vpp" for VPP LDO - - "ti,twl6030-vusim" for VUSIM LDO - - "ti,twl6030-vana" for VANA LDO - - "ti,twl6030-vcxio" for VCXIO LDO - - "ti,twl6030-vdac" for VDAC LDO - - "ti,twl6030-vusb" for VUSB LDO - - "ti,twl6030-v1v8" for V1V8 LDO - - "ti,twl6030-v2v1" for V2V1 LDO - - "ti,twl6030-vdd1" for VDD1 SMPS - - "ti,twl6030-vdd2" for VDD2 SMPS - - "ti,twl6030-vdd3" for VDD3 SMPS -For twl6032 regulators/LDOs -- compatible: - - "ti,twl6032-ldo1" for LDO1 LDO - - "ti,twl6032-ldo2" for LDO2 LDO - - "ti,twl6032-ldo3" for LDO3 LDO - - "ti,twl6032-ldo4" for LDO4 LDO - - "ti,twl6032-ldo5" for LDO5 LDO - - "ti,twl6032-ldo6" for LDO6 LDO - - "ti,twl6032-ldo7" for LDO7 LDO - - "ti,twl6032-ldoln" for LDOLN LDO - - "ti,twl6032-ldousb" for LDOUSB LDO - - "ti,twl6032-smps3" for SMPS3 SMPS - - "ti,twl6032-smps4" for SMPS4 SMPS - - "ti,twl6032-vio" for VIO SMPS -For twl4030 regulators/LDOs -- compatible: - - "ti,twl4030-vaux1" for VAUX1 LDO - - "ti,twl4030-vaux2" for VAUX2 LDO - - "ti,twl5030-vaux2" for VAUX2 LDO - - "ti,twl4030-vaux3" for VAUX3 LDO - - "ti,twl4030-vaux4" for VAUX4 LDO - - "ti,twl4030-vmmc1" for VMMC1 LDO - - "ti,twl4030-vmmc2" for VMMC2 LDO - - "ti,twl4030-vpll1" for VPLL1 LDO - - "ti,twl4030-vpll2" for VPLL2 LDO - - "ti,twl4030-vsim" for VSIM LDO - - "ti,twl4030-vdac" for VDAC LDO - - "ti,twl4030-vintana2" for VINTANA2 LDO - - "ti,twl4030-vio" for VIO LDO - - "ti,twl4030-vdd1" for VDD1 SMPS - - "ti,twl4030-vdd2" for VDD2 SMPS - - "ti,twl4030-vintana1" for VINTANA1 LDO - - "ti,twl4030-vintdig" for VINTDIG LDO - - "ti,twl4030-vusb1v5" for VUSB1V5 LDO - - "ti,twl4030-vusb1v8" for VUSB1V8 LDO - - "ti,twl4030-vusb3v1" for VUSB3V1 LDO - -Optional properties: -- Any optional property defined in bindings/regulator/regulator.txt - -Example: - - xyz: regulator@0 { - compatible = "ti,twl6030-vaux1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - }; diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt deleted file mode 100644 index 596e0c97be7a..000000000000 --- a/Documentation/devicetree/bindings/rtc/twl-rtc.txt +++ /dev/null @@ -1,12 +0,0 @@ -* TI twl RTC - -The TWL family (twl4030/6030) contains a RTC. - -Required properties: -- compatible : Should be twl4030-rtc - -Examples: - -rtc@0 { - compatible = "ti,twl4030-rtc"; -}; diff --git a/Documentation/devicetree/bindings/sound/nokia,rx51.txt b/Documentation/devicetree/bindings/sound/nokia,rx51.txt new file mode 100644 index 000000000000..72f93d996273 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nokia,rx51.txt @@ -0,0 +1,27 @@ +* Nokia N900 audio setup + +Required properties: +- compatible: Should contain "nokia,n900-audio" +- nokia,cpu-dai: phandle for the McBSP node +- nokia,audio-codec: phandles for the main TLV320AIC3X node and the + auxiliary TLV320AIC3X node (in this order) +- nokia,headphone-amplifier: phandle for the TPA6130A2 node +- tvout-selection-gpios: GPIO for tvout selection +- jack-detection-gpios: GPIO for jack detection +- eci-switch-gpios: GPIO for ECI (Enhancement Control Interface) switch +- speaker-amplifier-gpios: GPIO for speaker amplifier + +Example: + +sound { + compatible = "nokia,n900-audio"; + + nokia,cpu-dai = <&mcbsp2>; + nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; + nokia,headphone-amplifier = <&tpa6130a2>; + + tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ + jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ + eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ + speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt deleted file mode 100644 index 0aee0ad3f035..000000000000 --- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt +++ /dev/null @@ -1,40 +0,0 @@ -USB COMPARATOR OF TWL CHIPS - -TWL6030 USB COMPARATOR - - compatible : Should be "ti,twl6030-usb" - - interrupts : Two interrupt numbers to the cpu should be specified. First - interrupt number is the otg interrupt number that raises ID interrupts when - the controller has to act as host and the second interrupt number is the - usb interrupt number that raises VBUS interrupts when the controller has to - act as device - - usb-supply : phandle to the regulator device tree node. It should be vusb - if it is twl6030 or ldousb if it is twl6032 subclass. - -twl6030-usb { - compatible = "ti,twl6030-usb"; - interrupts = < 4 10 >; -}; - -Board specific device node entry -&twl6030-usb { - usb-supply = <&vusb>; -}; - -TWL4030 USB PHY AND COMPARATOR - - compatible : Should be "ti,twl4030-usb" - - interrupts : The interrupt numbers to the cpu should be specified. First - interrupt number is the otg interrupt number that raises ID interrupts - and VBUS interrupts. The second interrupt number is optional. - - <supply-name>-supply : phandle to the regulator device tree node. - <supply-name> should be vusb1v5, vusb1v8 and vusb3v1 - - usb_mode : The mode used by the phy to connect to the controller. "1" - specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. - -twl4030-usb { - compatible = "ti,twl4030-usb"; - interrupts = < 10 4 >; - usb1v5-supply = <&vusb1v5>; - usb1v8-supply = <&vusb1v8>; - usb3v1-supply = <&vusb3v1>; - usb_mode = <1>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt deleted file mode 100644 index 80a37193c0b8..000000000000 --- a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt +++ /dev/null @@ -1,10 +0,0 @@ -Device tree bindings for twl4030-wdt driver (TWL4030 watchdog) - -Required properties: - compatible = "ti,twl4030-wdt"; - -Example: - -watchdog { - compatible = "ti,twl4030-wdt"; -}; |