diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb')
10 files changed, 20 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index d9207bf9d894..0f520f17735e 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -39,7 +39,7 @@ properties: maxItems: 1 phys: - description: PHY specifier for the OTG PHY + maxItems: 1 phy-names: const: usb diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml index ffa148b9eaa8..d4618d15ecc1 100644 --- a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml +++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml @@ -22,6 +22,8 @@ properties: description: Interrupt for signals mirrored to out-gpios. in-gpios: + minItems: 1 + maxItems: 2 description: Array of one or two GPIO pins used for input signals. brcm,in-functions: @@ -33,6 +35,7 @@ properties: description: Array of enable and mask pairs, one per gpio in-gpios. out-gpios: + maxItems: 1 description: Array of one GPIO pin used for output signals. brcm,out-functions: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 6816de7dfc00..cf83f2d9afac 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -128,7 +128,7 @@ properties: Phandle of a companion. phys: - description: PHY specifier for the USB PHY + maxItems: 1 phy-names: const: usb diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index 53df281f618c..0f5f6ea702d0 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -101,7 +101,7 @@ properties: Overrides the detected port count phys: - description: PHY specifier for the USB PHY + maxItems: 1 phy-names: const: usb diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index 678396eeeb78..f506225a4d57 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -40,7 +40,7 @@ properties: - const: mc phys: - description: PHY specifier for the USB PHY + maxItems: 1 usb-role-switch: type: boolean diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index 929a3f413b44..9fcf54b10b07 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -54,18 +54,19 @@ properties: description: phandle of a companion. ports: + $ref: /schemas/graph.yaml#/properties/ports description: | any connector to the data bus of this controller should be modelled using the OF graph bindings specified, if the "usb-role-switch" property is used. - type: object + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: High Speed (HS) data bus. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Super Speed (SS) data bus. required: diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 54c361d4a7af..e67223d90bb7 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -68,6 +68,7 @@ properties: Integer to use BUSWAIT register. renesas,enable-gpio: + maxItems: 1 description: | gpio specifier to check GPIO determining if USB function should be enabled. diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 52ceb07294a3..b86bf6bc9cd6 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -26,17 +26,17 @@ properties: maxItems: 1 ports: + $ref: /schemas/graph.yaml#/properties/ports description: OF graph bindings (specified in bindings/graph.txt) that model SS data bus to the SS capable connector. - type: object + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Super Speed (SS) MUX inputs connected to SS capable connector. - $ref: /connector/usb-connector.yaml#/properties/ports/properties/port@1 port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Output of 2:1 MUX connected to Super Speed (SS) data bus. required: diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index c80a83571919..7ec87a783c5c 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -19,7 +19,7 @@ properties: - const: ti,am64-usb reg: - description: module registers + maxItems: 1 ranges: true @@ -28,6 +28,7 @@ properties: PM domain provider node and an args specifier containing the USB device id value. See, Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + maxItems: 1 clocks: description: Clock phandles to usb2_refclk and lpm_clk diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index ca7fbe3ed22e..9a068d3bc73b 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -43,12 +43,14 @@ properties: maxItems: 2 power-domains: + maxItems: 1 description: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id value. This property is as per the binding, Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt phys: + maxItems: 1 description: PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY to be turned on before the controller. |