diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/twlxxxx-usb.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/twlxxxx-usb.txt | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt deleted file mode 100644 index 0aee0ad3f035..000000000000 --- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt +++ /dev/null @@ -1,40 +0,0 @@ -USB COMPARATOR OF TWL CHIPS - -TWL6030 USB COMPARATOR - - compatible : Should be "ti,twl6030-usb" - - interrupts : Two interrupt numbers to the cpu should be specified. First - interrupt number is the otg interrupt number that raises ID interrupts when - the controller has to act as host and the second interrupt number is the - usb interrupt number that raises VBUS interrupts when the controller has to - act as device - - usb-supply : phandle to the regulator device tree node. It should be vusb - if it is twl6030 or ldousb if it is twl6032 subclass. - -twl6030-usb { - compatible = "ti,twl6030-usb"; - interrupts = < 4 10 >; -}; - -Board specific device node entry -&twl6030-usb { - usb-supply = <&vusb>; -}; - -TWL4030 USB PHY AND COMPARATOR - - compatible : Should be "ti,twl4030-usb" - - interrupts : The interrupt numbers to the cpu should be specified. First - interrupt number is the otg interrupt number that raises ID interrupts - and VBUS interrupts. The second interrupt number is optional. - - <supply-name>-supply : phandle to the regulator device tree node. - <supply-name> should be vusb1v5, vusb1v8 and vusb3v1 - - usb_mode : The mode used by the phy to connect to the controller. "1" - specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. - -twl4030-usb { - compatible = "ti,twl4030-usb"; - interrupts = < 10 4 >; - usb1v5-supply = <&vusb1v5>; - usb1v8-supply = <&vusb1v8>; - usb3v1-supply = <&vusb3v1>; - usb_mode = <1>; -}; |