diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-meson.txt')
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-meson.txt | 55 |
1 files changed, 0 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt deleted file mode 100644 index b7f5e86fed22..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-meson.txt +++ /dev/null @@ -1,55 +0,0 @@ -Amlogic Meson SPI controllers - -* SPIFC (SPI Flash Controller) - -The Meson SPIFC is a controller optimized for communication with SPI -NOR memories, without DMA support and a 64-byte unified transmit / -receive buffer. - -Required properties: - - compatible: should be "amlogic,meson6-spifc" or "amlogic,meson-gxbb-spifc" - - reg: physical base address and length of the controller registers - - clocks: phandle of the input clock for the baud rate generator - - #address-cells: should be 1 - - #size-cells: should be 0 - - spi@c1108c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0xc1108c80 0x80>; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; - -* SPICC (SPI Communication Controller) - -The Meson SPICC is generic SPI controller for general purpose Full-Duplex -communications with dedicated 16 words RX/TX PIO FIFOs. - -Required properties: - - compatible: should be: - "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs. - "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs - - reg: physical base address and length of the controller registers - - interrupts: The interrupt specifier - - clock-names: Must contain "core" - - clocks: phandle of the input clock for the baud rate generator - - #address-cells: should be 1 - - #size-cells: should be 0 - -Optional properties: - - resets: phandle of the internal reset line - -See ../spi/spi-bus.txt for more details on SPI bus master and slave devices -required and optional properties. - -Example : - spi@c1108d80 { - compatible = "amlogic,meson-gx-spicc"; - reg = <0xc1108d80 0x80>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&clk81>; - #address-cells = <1>; - #size-cells = <0>; - }; |