summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/remoteproc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc')
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt3
-rw-r--r--Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml11
2 files changed, 7 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 6451cf4a7b7b..1f9a62e13ebe 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -188,6 +188,9 @@ For the compatible strings below the following phandle references are required:
by the offset within syscon for conn_box_spare0 register
used by the modem sub-system running on SC7180 SoC.
+The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
+on platforms which do not have TrustZone.
+
= SUBNODES:
The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
the memory regions used by the Hexagon firmware. Each sub-node must contain:
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index c0d83865e933..4ffa25268fcc 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -25,25 +25,23 @@ properties:
maxItems: 3
resets:
- maxItems: 1
+ maxItems: 1
st,syscfg-holdboot:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: remote processor reset hold boot
- Phandle of syscon block.
- The offset of the hold boot setting register.
- The field mask of the hold boot.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
maxItems: 1
st,syscfg-tz:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
description:
Reference to the system configuration which holds the RCC trust zone mode
- Phandle of syscon block.
- The offset of the RCC trust zone mode register.
- The field mask of the RCC trust zone mode.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
maxItems: 1
interrupts:
@@ -90,8 +88,7 @@ properties:
(see ../reserved-memory/reserved-memory.txt)
st,syscfg-pdds:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: |
Reference to the system configuration which holds the remote
1st cell: phandle to syscon block