diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt | 34 |
1 files changed, 31 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt index ed34bb1ee81c..4980776122cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt @@ -14,7 +14,8 @@ phrase "pin configuration node". The pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration for BM1880 SoC -includes only pinmux as there is no pinconf support available in SoC. +includes pinmux and various pin configuration parameters, such as pull-up, +slew rate etc... Each configuration node can consist of multiple nodes describing the pinmux options. The name of each subnode is not important; all subnodes should be @@ -84,10 +85,37 @@ Required Properties: gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, spi0 +Optional Properties: + +- bias-disable: No arguments. Disable pin bias. +- bias-pull-down: No arguments. The specified pins should be configured as + pull down. +- bias-pull-up: No arguments. The specified pins should be configured as + pull up. +- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified + pins +- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified + pins +- slew-rate: Integer. Sets slew rate for the specified pins. + Valid values are: + <0> - Slow + <1> - Fast +- drive-strength: Integer. Selects the drive strength for the specified + pins in mA. + Valid values are: + <4> + <8> + <12> + <16> + <20> + <24> + <28> + <32> + Example: - pinctrl: pinctrl@50 { + pinctrl: pinctrl@400 { compatible = "bitmain,bm1880-pinctrl"; - reg = <0x50 0x4B0>; + reg = <0x400 0x120>; pinctrl_uart0_default: uart0-default { pinmux { |