diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt index 4f9d23d2ed67..7d3b09474657 100644 --- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt +++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt @@ -7,8 +7,19 @@ Required properties: - compatible: "samsung,exynos5440-pcie" - reg: base addresses and lengths of the pcie controller, the phy controller, additional register for the phy controller. + (Registers for the phy controller are DEPRECATED. + Use the PHY framework.) +- reg-names : First name should be set to "elbi". + And use the "config" instead of getting the confgiruation address space + from "ranges". + NOTE: When use the "config" property, reg-names must be set. - interrupts: A list of interrupt outputs for level interrupt, pulse interrupt, special interrupt. +- phys: From PHY binding. Phandle for the Generic PHY. + Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt + +Other common properties refer to + Documentation/devicetree/binding/pci/designware-pcie.txt Example: @@ -54,6 +65,24 @@ SoC specific DT Entry: num-lanes = <4>; }; +With using PHY framework: + pcie_phy0: pcie-phy@270000 { + ... + reg = <0x270000 0x1000>, <0x271000 0x40>; + reg-names = "phy", "block"; + ... + }; + + pcie@290000 { + ... + reg = <0x290000 0x1000>, <0x40000000 0x1000>; + reg-names = "elbi", "config"; + phys = <&pcie_phy0>; + ranges = <0x81000000 0 0 0x60001000 0 0x00010000 + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; + ... + }; + Board specific DT Entry: pcie@290000 { |