summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt18
1 files changed, 16 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index 7fab84b33531..07a75094c5a8 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -8,7 +8,15 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC;
- "renesas,pci-r8a7794" for the R8A7794 SoC.
+ "renesas,pci-r8a7793" for the R8A7793 SoC;
+ "renesas,pci-r8a7794" for the R8A7794 SoC;
+ "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
+
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: A list of physical regions to access the device: the first is
the operational registers for the OHCI/EHCI controllers and the
second is for the bridge configuration and control registers.
@@ -24,10 +32,15 @@ Required properties:
- interrupt-map-mask: standard property that helps to define the interrupt
mapping.
+Optional properties:
+- dma-ranges: a single range for the inbound memory region. If not supplied,
+ defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
+ allowed combinations of address and size.
+
Example SoC configuration:
pci0: pci@ee090000 {
- compatible = "renesas,pci-r8a7790";
+ compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0x0 0xee090000 0x0 0xc00>,
<0x0 0xee080000 0x0 0x1100>;
@@ -38,6 +51,7 @@ Example SoC configuration:
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH