diff options
Diffstat (limited to 'Documentation/devicetree/bindings/opp')
| -rw-r--r-- | Documentation/devicetree/bindings/opp/opp.txt | 13 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt | 63 |
2 files changed, 76 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 9d733af26be7..4e4f30288c8b 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -45,6 +45,11 @@ Devices supporting OPPs must set their "operating-points-v2" property with phandle to a OPP table in their DT node. The OPP core will use this phandle to find the operating points for the device. +This can contain more than one phandle for power domain providers that provide +multiple power domains. That is, one phandle for each power domain. If only one +phandle is available, then the same OPP table will be used for all power domains +provided by the power domain provider. + If required, this can be extended for SoC vendor specific bindings. Such bindings should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt and should have a compatible description like: "operating-points-v2-<vendor>". @@ -154,6 +159,14 @@ Optional properties: - status: Marks the node enabled/disabled. +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. / { diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt new file mode 100644 index 000000000000..832346e489a3 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt @@ -0,0 +1,63 @@ +Texas Instruments OMAP compatible OPP supply description + +OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which +contain data that can be used to adjust voltages programmed for some of their +supplies for more efficient operation. This binding provides the information +needed to read these values and use them to program the main regulator during +an OPP transitions. + +Also, some supplies may have an associated vbb-supply which is an Adaptive Body +Bias regulator which much be transitioned in a specific sequence with regards +to the vdd-supply and clk when making an OPP transition. By supplying two +regulators to the device that will undergo OPP transitions we can make use +of the multi regulator binding that is part of the OPP core described here [1] +to describe both regulators needed by the platform. + +[1] Documentation/devicetree/bindings/opp/opp.txt + +Required Properties for Device Node: +- vdd-supply: phandle to regulator controlling VDD supply +- vbb-supply: phandle to regulator controlling Body Bias supply + (Usually Adaptive Body Bias regulator) + +Required Properties for opp-supply node: +- compatible: Should be one of: + "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB + "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD + along with VBB + "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD + but no VBB. +- reg: Address and length of the efuse register set for the device (mandatory + only for "ti,omap5-opp-supply") +- ti,efuse-settings: An array of u32 tuple items providing information about + optimized efuse configuration. Each item consists of the following: + volt: voltage in uV - reference voltage (OPP voltage) + efuse_offseet: efuse offset from reg where the optimized voltage is stored. +- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. + +Example: + +/* Device Node (CPU) */ +cpus { + cpu0: cpu@0 { + device_type = "cpu"; + + ... + + vdd-supply = <&vcc>; + vbb-supply = <&abb_mpu>; + }; +}; + +/* OMAP OPP Supply with Class0 registers */ +opp_supply_mpu: opp_supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; +}; |