summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml')
-rw-r--r--Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml257
1 files changed, 257 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
new file mode 100644
index 000000000000..8c2e9ac5f68d
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM OPP bindings
+
+maintainers:
+ - Ilia Lin <ilia.lin@kernel.org>
+
+allOf:
+ - $ref: opp-v2-base.yaml#
+
+description: |
+ In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
+ the CPU frequencies subset and voltage value of each OPP varies based on
+ the silicon variant in use.
+ Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+ defines the voltage and frequency value based on the msm-id in SMEM
+ and speedbin blown in the efuse combination.
+ The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
+ to provide the OPP framework with required information (existing HW bitmap).
+ This is used to determine the voltage and frequency value for each OPP of
+ operating-points-v2 table when it is parsed by the OPP framework.
+
+properties:
+ compatible:
+ const: operating-points-v2-kryo-cpu
+
+ nvmem-cells:
+ description: |
+ A phandle pointing to a nvmem-cells node representing the
+ efuse registers that has information about the
+ speedbin that is used to select the right frequency/voltage
+ value pair.
+
+ opp-shared: true
+
+patternProperties:
+ '^opp-?[0-9]+$':
+ type: object
+
+ properties:
+ opp-hz: true
+
+ opp-microvolt: true
+
+ opp-supported-hw:
+ description: |
+ A single 32 bit bitmap value, representing compatible HW.
+ Bitmap:
+ 0: MSM8996 V3, speedbin 0
+ 1: MSM8996 V3, speedbin 1
+ 2: MSM8996 V3, speedbin 2
+ 3: unused
+ 4: MSM8996 SG, speedbin 0
+ 5: MSM8996 SG, speedbin 1
+ 6: MSM8996 SG, speedbin 2
+ 7-31: unused
+ maximum: 0x77
+
+ clock-latency-ns: true
+
+ required-opps: true
+
+ required:
+ - opp-hz
+
+required:
+ - compatible
+
+if:
+ required:
+ - nvmem-cells
+then:
+ patternProperties:
+ '^opp-?[0-9]+$':
+ required:
+ - opp-supported-hw
+
+additionalProperties: false
+
+examples:
+ - |
+ / {
+ model = "Qualcomm Technologies, Inc. DB820c";
+ compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+ };
+
+ cluster0_opp: opp-table-0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp-table-1 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-microvolt = <905000 905000 1140000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x70>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x31>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ opp-microvolt = <1140000 905000 1140000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qfprom: qfprom@74000 {
+ compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+ reg = <0x00074000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ speedbin_efuse: speedbin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
+ };
+ };
+ };