diff options
Diffstat (limited to 'Documentation/devicetree/bindings/nvmem/layouts')
3 files changed, 245 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml new file mode 100644 index 000000000000..c713e23819f1 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/kontron,sl28-vpd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM layout of the Kontron SMARC-sAL28 vital product data + +maintainers: + - Michael Walle <michael@walle.cc> + +description: + The vital product data (VPD) of the sl28 boards contains a serial + number and a base MAC address. The actual MAC addresses for the + on-board ethernet devices are derived from this base MAC address by + adding an offset. + +select: false + +properties: + compatible: + const: kontron,sl28-vpd + + serial-number: + type: object + description: The board's serial number + + additionalProperties: false + + base-mac-address: + type: object + description: + Base MAC address for all on-module network interfaces. The first + argument of the phandle will be treated as an offset. + + properties: + "#nvmem-cell-cells": + const: 1 + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + otp-1 { + compatible = "user-otp"; + + nvmem-layout { + compatible = "kontron,sl28-vpd"; + + serial_number: serial-number { + }; + + base_mac_address: base-mac-address { + #nvmem-cell-cells = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml new file mode 100644 index 000000000000..8512ee538c4c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/nvmem-layout.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM (Non Volatile Memory) layouts + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Michael Walle <michael@walle.cc> + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: | + Most NVMEM layouts are static and thus do not require additional description + besides the bytes/bits offset and length. Other layouts can be less statically + define and might require dynamic reading of the NVMEM device in order to + perform their parsing. The nvmem-layout container is here to describe these. + +oneOf: + - $ref: kontron,sl28-vpd.yaml + - $ref: onie,tlv-layout.yaml + +properties: + compatible: true + + '#address-cells': false + + '#size-cells': false + +required: + - compatible + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml new file mode 100644 index 000000000000..5a0e7671aa3f --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/onie,tlv-layout.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM layout of the ONIE tlv table + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: + Modern networking hardware implementing the Open Compute Project ONIE + infrastructure shall provide a non-volatile memory with a table whose the + content is well specified and gives many information about the manufacturer + (name, country of manufacture, etc) as well as device caracteristics (serial + number, hardware version, mac addresses, etc). The underlaying device type + (flash, EEPROM,...) is not specified. The exact location of each value is also + dynamic and should be discovered at run time because it depends on the + parameters the manufacturer decided to embed. + +select: false + +properties: + compatible: + const: onie,tlv-layout + + product-name: + type: object + additionalProperties: false + + part-number: + type: object + additionalProperties: false + + serial-number: + type: object + additionalProperties: false + + mac-address: + type: object + description: + Base MAC address for all on-module network interfaces. The first + argument of the phandle will be treated as an offset. + + properties: + "#nvmem-cell-cells": + const: 1 + + additionalProperties: false + + manufacture-date: + type: object + additionalProperties: false + + device-version: + type: object + additionalProperties: false + + label-revision: + type: object + additionalProperties: false + + platforn-name: + type: object + additionalProperties: false + + onie-version: + type: object + additionalProperties: false + + num-macs: + type: object + additionalProperties: false + + manufacturer: + type: object + additionalProperties: false + + country-code: + type: object + additionalProperties: false + + vendor: + type: object + additionalProperties: false + + diag-version: + type: object + additionalProperties: false + + service-tag: + type: object + additionalProperties: false + + vendor-extension: + type: object + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@56 { + compatible = "atmel,24c64"; + read-only; + reg = <0x56>; + + nvmem-layout { + compatible = "onie,tlv-layout"; + + serial-number { + }; + }; + }; + }; + + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; + reg = <0>; + + otp { + compatible = "user-otp"; + + nvmem-layout { + compatible = "onie,tlv-layout"; + + mac-address { + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; +... |