diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/ethernet.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet.txt | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 3a6916909d90..08dd263beeb9 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -8,7 +8,8 @@ The following properties are common to the Ethernet controllers: property; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in ePAPR). + the maximum frame size (there's contradiction in the Devicetree + Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: * "mii" @@ -32,9 +33,11 @@ The following properties are common to the Ethernet controllers: * "2000base-x", * "2500base-x", * "rxaui" -- phy-connection-type: the same as "phy-mode" property but described in ePAPR; +- phy-connection-type: the same as "phy-mode" property but described in the + Devicetree Specification; - phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in ePAPR and so preferred; + device; this property is described in the Devicetree Specification and so + preferred; - phy: the same as "phy-handle" property, not recommended for new bindings. - phy-device: the same as "phy-handle" property, not recommended for new bindings. |