summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/arc_emac.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/arc_emac.txt')
-rw-r--r--Documentation/devicetree/bindings/net/arc_emac.txt11
1 files changed, 2 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
index bcbc3f009158..7fbb027218a1 100644
--- a/Documentation/devicetree/bindings/net/arc_emac.txt
+++ b/Documentation/devicetree/bindings/net/arc_emac.txt
@@ -6,19 +6,12 @@ Required properties:
- interrupts: Should contain the EMAC interrupts
- clock-frequency: CPU frequency. It is needed to calculate and set polling
period of EMAC.
-- max-speed: Maximum supported data-rate in Mbit/s. In some HW configurations
-bandwidth of external memory controller might be a limiting factor. That's why
-it's required to specify which data-rate is supported on current SoC or FPGA.
-For example if only 10 Mbit/s is supported (10BASE-T) set "10". If 100 Mbit/s is
-supported (100BASE-TX) set "100".
-- phy: PHY device attached to the EMAC via MDIO bus
+- max-speed: see ethernet.txt file in the same directory.
+- phy: see ethernet.txt file in the same directory.
Child nodes of the driver are the individual PHY devices connected to the
MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-Optional properties:
-- mac-address: 6 bytes, mac address
-
Examples:
ethernet@c0fc2000 {