summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/apm-xgene-enet.txt')
-rw-r--r--Documentation/devicetree/bindings/net/apm-xgene-enet.txt7
1 files changed, 6 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
index 6151999c5dca..f55aa280d34f 100644
--- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -14,7 +14,11 @@ Required properties for all the ethernet interfaces:
- "enet_csr": Ethernet control and status register address space
- "ring_csr": Descriptor ring control and status register address space
- "ring_cmd": Descriptor ring command register address space
-- interrupts: Ethernet main interrupt
+- interrupts: Two interrupt specifiers can be specified.
+ - First is the Rx interrupt. This irq is mandatory.
+ - Second is the Tx completion interrupt.
+ This is supported only on SGMII based 1GbE and 10GbE interfaces.
+- port-id: Port number (0 or 1)
- clocks: Reference to the clock entry.
- local-mac-address: MAC address assigned to this device
- phy-connection-type: Interface type between ethernet device and PHY device
@@ -49,6 +53,7 @@ Example:
<0x0 0X10000000 0x0 0X200>;
reg-names = "enet_csr", "ring_csr", "ring_cmd";
interrupts = <0x0 0x3c 0x4>;
+ port-id = <0>;
clocks = <&menetclk 0>;
local-mac-address = [00 01 73 00 00 01];
phy-connection-type = "rgmii";