1 files changed, 0 insertions, 69 deletions
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.txt b/Documentation/devicetree/bindings/mux/gpio-mux.txt
deleted file mode 100644
index b8f746344d80..000000000000
--- a/Documentation/devicetree/bindings/mux/gpio-mux.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-GPIO-based multiplexer controller bindings
-
-Define what GPIO pins are used to control a multiplexer. Or several
-multiplexers, if the same pins control more than one multiplexer.
-
-Required properties:
-- compatible : "gpio-mux"
-- mux-gpios : list of gpios used to control the multiplexer, least
-	      significant bit first.
-- #mux-control-cells : <0>
-* Standard mux-controller bindings as decribed in mux-controller.txt
-
-Optional properties:
-- idle-state : if present, the state the mux will have when idle. The
-	       special state MUX_IDLE_AS_IS is the default.
-
-The multiplexer state is defined as the number represented by the
-multiplexer GPIO pins, where the first pin is the least significant
-bit. An active pin is a binary 1, an inactive pin is a binary 0.
-
-Example:
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	adc-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "sync-1", "in", "out", "sync-2";
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		i2c-parent = <&i2c1>;
-
-		mux-controls = <&mux>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				/* ... */
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				/* ... */
-			};
-		};
-	};