diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/sdhci-am654.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 61 |
1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt deleted file mode 100644 index 6d202f4d9249..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt +++ /dev/null @@ -1,61 +0,0 @@ -Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs - -The bindings follow the mmc[1], clock[2] and interrupt[3] bindings. -Only deviations are documented here. - - [1] Documentation/devicetree/bindings/mmc/mmc.txt - [2] Documentation/devicetree/bindings/clock/clock-bindings.txt - [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Required Properties: - - compatible: should be one of: - "ti,am654-sdhci-5.1": SDHCI on AM654 device. - "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device. - "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device. - - reg: Must be two entries. - - The first should be the sdhci register space - - The second should the subsystem/phy register space - - clocks: Handles to the clock inputs. - - clock-names: Tuple including "clk_xin" and "clk_ahb" - - interrupts: Interrupt specifiers - Output tap delay for each speed mode: - - ti,otap-del-sel-legacy - - ti,otap-del-sel-mmc-hs - - ti,otap-del-sel-sd-hs - - ti,otap-del-sel-sdr12 - - ti,otap-del-sel-sdr25 - - ti,otap-del-sel-sdr50 - - ti,otap-del-sel-sdr104 - - ti,otap-del-sel-ddr50 - - ti,otap-del-sel-ddr52 - - ti,otap-del-sel-hs200 - - ti,otap-del-sel-hs400 - These bindings must be provided otherwise the driver will disable the - corresponding speed mode (i.e. all nodes must provide at least -legacy) - -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): - - ti,trm-icp: DLL trim select - - ti,driver-strength-ohm: driver strength in ohms. - Valid values are 33, 40, 50, 66 and 100 ohms. -Optional Properties: - - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0. - - ti,clkbuf-sel: Clock Delay Buffer Select - -Example: - - sdhci0: sdhci@4f80000 { - compatible = "ti,am654-sdhci-5.1"; - reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; - power-domains = <&k3_pds 47>; - clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; - clock-names = "clk_ahb", "clk_xin"; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - sdhci-caps-mask = <0x80000007 0x0>; - mmc-ddr-1_8v; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-ddr52 = <0x5>; - ti,otap-del-sel-hs200 = <0x5>; - ti,otap-del-sel-hs400 = <0x0>; - ti,trm-icp = <0x8>; - }; |