summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/brcm,cru.yaml')
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,cru.yaml86
1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
new file mode 100644
index 000000000000..fc1317ab3226
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom CRU
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+ Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
+ block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
+ clocks, pinctrl, USB PHY and thermal.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,ns-cru
+ - const: simple-mfd
+
+ reg:
+ description: CRU registers
+
+ ranges: true
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ pinctrl:
+ $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
+patternProperties:
+ '^clock-controller@[a-f0-9]+$':
+ $ref: ../clock/brcm,iproc-clocks.yaml
+
+ '^thermal@[a-f0-9]+$':
+ $ref: ../thermal/brcm,ns-thermal.yaml
+
+additionalProperties: false
+
+required:
+ - reg
+
+examples:
+ - |
+ cru-bus@1800c100 {
+ compatible = "brcm,ns-cru", "simple-mfd";
+ reg = <0x1800c100 0x1d0>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clock-controller@100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
+ };
+
+ clock-controller@140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
+ "iprocfast", "sata1", "sata2";
+ };
+
+ pinctrl {
+ compatible = "brcm,bcm4708-pinmux";
+ offset = <0x1c0>;
+ };
+
+ thermal@2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+ };