1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
deleted file mode 100644
index a2e3e56f0257..000000000000
--- a/Documentation/devicetree/bindings/media/sun6i-csi.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Allwinner V3s Camera Sensor Interface
--------------------------------------
-
-Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
-
-Required properties:
-  - compatible: value must be one of:
-    * "allwinner,sun6i-a31-csi"
-    * "allwinner,sun8i-a83t-csi"
-    * "allwinner,sun8i-h3-csi"
-    * "allwinner,sun8i-v3s-csi"
-    * "allwinner,sun50i-a64-csi"
-  - reg: base address and size of the memory-mapped region.
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the CSI
-    * bus: the CSI interface clock
-    * mod: the CSI module clock
-    * ram: the CSI DRAM clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset line driving the CSI
-
-The CSI node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Endpoint node properties for CSI
----------------------------------
-See the video-interfaces.txt for a detailed description of these properties.
-- remote-endpoint	: (required) a phandle to the bus receiver's endpoint
-			   node
-- bus-width:		: (required) must be 8, 10, 12 or 16
-- pclk-sample		: (optional) (default: sample on falling edge)
-- hsync-active		: (required; parallel-only)
-- vsync-active		: (required; parallel-only)
-
-Example:
-
-csi1: csi@1cb4000 {
-	compatible = "allwinner,sun8i-v3s-csi";
-	reg = <0x01cb4000 0x1000>;
-	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&ccu CLK_BUS_CSI>,
-		 <&ccu CLK_CSI1_SCLK>,
-		 <&ccu CLK_DRAM_CSI>;
-	clock-names = "bus", "mod", "ram";
-	resets = <&ccu RST_BUS_CSI>;
-
-	port {
-		/* Parallel bus endpoint */
-		csi1_ep: endpoint {
-			remote-endpoint = <&adv7611_ep>;
-			bus-width = <16>;
-
-			/* If hsync-active/vsync-active are missing,
-			   embedded BT.656 sync is used */
-			hsync-active = <0>; /* Active low */
-			vsync-active = <0>; /* Active low */
-			pclk-sample = <1>;  /* Rising */
-		};
-	};
-};