summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt')
-rw-r--r--Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt67
1 files changed, 0 insertions, 67 deletions
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
deleted file mode 100644
index 525ec82615a6..000000000000
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
-
-Samsung's Exynos architecture contains System MMUs that enables scattered
-physical memory chunks visible as a contiguous region to DMA-capable peripheral
-devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
-
-System MMU is an IOMMU and supports identical translation table format to
-ARMv7 translation tables with minimum set of page properties including access
-permissions, shareability and security protection. In addition, System MMU has
-another capabilities like L2 TLB or block-fetch buffers to minimize translation
-latency.
-
-System MMUs are in many to one relation with peripheral devices, i.e. single
-peripheral device might have multiple System MMUs (usually one for each bus
-master), but one System MMU can handle transactions from only one peripheral
-device. The relation between a System MMU and the peripheral device needs to be
-defined in device node of the peripheral device.
-
-MFC in all Exynos SoCs and FIMD, M2M Scalers and G2D in Exynos5420 has 2 System
-MMUs.
-* MFC has one System MMU on its left and right bus.
-* FIMD in Exynos5420 has one System MMU for window 0 and 4, the other system MMU
- for window 1, 2 and 3.
-* M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and
- the other System MMU on the write channel.
-
-For information on assigning System MMU controller to its peripheral devices,
-see generic IOMMU bindings.
-
-Required properties:
-- compatible: Should be "samsung,exynos-sysmmu"
-- reg: A tuple of base address and size of System MMU registers.
-- #iommu-cells: Should be <0>.
-- interrupts: An interrupt specifier for interrupt signal of System MMU,
- according to the format defined by a particular interrupt
- controller.
-- clock-names: Should be "sysmmu" or a pair of "aclk" and "pclk" to gate
- SYSMMU core clocks.
- Optional "master" if the clock to the System MMU is gated by
- another gate clock other core (usually main gate clock
- of peripheral device this SYSMMU belongs to).
-- clocks: Phandles for respective clocks described by clock-names.
-- power-domains: Required if the System MMU is needed to gate its power.
- Please refer to the following document:
- Documentation/devicetree/bindings/power/pd-samsung.txt
-
-Examples:
- gsc_0: gsc@13e00000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
- power-domains = <&pd_gsc>;
- clocks = <&clock CLK_GSCL0>;
- clock-names = "gscl";
- iommus = <&sysmmu_gsc0>;
- };
-
- sysmmu_gsc0: sysmmu@13e80000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13E80000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
- power-domains = <&pd_gsc>;
- #iommu-cells = <0>;
- };