1 files changed, 0 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
deleted file mode 100644
index fc03ea4cf5ab..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Device tree bindings for Goodix GT9xx series touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "goodix,gt1151"
-				 or "goodix,gt5663"
-				 or "goodix,gt5688"
-				 or "goodix,gt911"
-				 or "goodix,gt9110"
-				 or "goodix,gt912"
-				 or "goodix,gt927"
-				 or "goodix,gt9271"
-				 or "goodix,gt928"
-				 or "goodix,gt967"
- - reg			: I2C address of the chip. Should be 0x5d or 0x14
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - irq-gpios		: GPIO pin used for IRQ. The driver uses the
-			  interrupt gpio pin as output to reset the device.
- - reset-gpios		: GPIO pin used for reset
- - AVDD28-supply	: Analog power supply regulator on AVDD28 pin
- - VDDIO-supply		: GPIO power supply regulator on VDDIO pin
- - touchscreen-inverted-x
- - touchscreen-inverted-y
- - touchscreen-size-x
- - touchscreen-size-y
- - touchscreen-swapped-x-y
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		gt928@5d {
-			compatible = "goodix,gt928";
-			reg = <0x5d>;
-			interrupt-parent = <&gpio>;
-			interrupts = <0 0>;
-
-			irq-gpios = <&gpio1 0 0>;
-			reset-gpios = <&gpio1 1 0>;
-		};
-
-		/* ... */
-	};