1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb196a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells	: should be 1
-- #size-cells		: should be 0
-- reg			: address offset and range of bus
-- compatible		: should be "aspeed,ast2400-i2c-bus"
-			  or "aspeed,ast2500-i2c-bus"
-			  or "aspeed,ast2600-i2c-bus"
-- clocks		: root clock of bus, should reference the APB
-			  clock in the second cell
-- resets		: phandle to reset controller with the reset number in
-			  the second cell
-- interrupts		: interrupt number
-
-Optional Properties:
-- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
-		  specified
-- multi-master	: states that there is another master active on this bus.
-
-Example:
-
-i2c {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x1e78a000 0x1000>;
-
-	i2c_ic: interrupt-controller@0 {
-		#interrupt-cells = <1>;
-		compatible = "aspeed,ast2400-i2c-ic";
-		reg = <0x0 0x40>;
-		interrupts = <12>;
-		interrupt-controller;
-	};
-
-	i2c0: i2c-bus@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x40 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <0>;
-		interrupt-parent = <&i2c_ic>;
-	};
-};