summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/mrvl-gpio.txt')
-rw-r--r--Documentation/devicetree/bindings/gpio/mrvl-gpio.txt48
1 files changed, 0 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
deleted file mode 100644
index 30fd2201b3d4..000000000000
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Marvell PXA GPIO controller
-
-Required properties:
-- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
- "intel,pxa27x-gpio", "intel,pxa3xx-gpio",
- "marvell,pxa93x-gpio", "marvell,mmp-gpio",
- "marvell,mmp2-gpio" or marvell,pxa1928-gpio.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins.
- There're three gpio interrupts in arch-pxa, and they're gpio0,
- gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
- gpio_mux.
-- interrupt-names : Should be the names of irq resources. Each interrupt
- uses its own interrupt name, so there should be as many interrupt names
- as referenced interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify flags. See gpio.txt for possible
- values.
-
-Example for a MMP platform:
-
- gpio: gpio@d4019000 {
- compatible = "marvell,mmp-gpio";
- reg = <0xd4019000 0x1000>;
- interrupts = <49>;
- interrupt-names = "gpio_mux";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
-Example for a PXA3xx platform:
-
- gpio: gpio@40e00000 {
- compatible = "intel,pxa3xx-gpio";
- reg = <0x40e00000 0x10000>;
- interrupt-names = "gpio0", "gpio1", "gpio_mux";
- interrupts = <8 9 10>;
- gpio-controller;
- #gpio-cells = <0x2>;
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };